Math Powerpoint
•Download as PPT, PDF•
0 likes•157 views
Combined functions are complex functions created from simpler functions combined through addition, subtraction, division, and multiplication. They can be used to model real-life situations involving complex movements and rates of change, such as skiing, musical composition, and bungee jumping. Key terms used to describe waves include troughs, crests, amplitude, and wavelength.
Report
Share
Report
Share
![[object Object]](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
Double-Slit interference
Thomas Young's double-slit experiment demonstrated that light has wave-like properties by showing that light passing through two slits will produce an interference pattern of bright and dark fringes on a screen. The experiment found that the distance between fringes is determined by the wavelength of light and the distance between the slits and screen. Increasing the wavelength or distances between slits or screen decreases the fringe spacing. This relationship can be used to calculate unknown wavelengths from measured distances. For example, in an experiment using sodium light with 0.3mm slits 1.2m from a screen showing 2.4mm spaced fringes, the wavelength is calculated to be 589nm.
Lo6
The document summarizes the Young's double-slit experiment, which demonstrated that light has wave-like properties. It describes how constructive and destructive interference occurs when light passes through two slits, based on the wavelength of light and the geometry of the double-slit setup. The spacing between interference fringes is directly proportional to the wavelength of light and distance from the slits to the screen, and inversely proportional to the slit separation distance.
interference pattern
The equations are not directly applicable here because n1 ≠ n3. A more general approach is needed such as:
1) Calculate the reflection and transmission coefficients at each interface using Fresnel's equations.
2) Use the optical path length approach and phase changes to determine the net amplitude and phase for light reflecting from the front and back surfaces.
3) Combine using the principle of superposition to determine the net intensity.
The key is that the film thickness and refractive indices of all materials must be accounted for to determine the interference condition. Equations 35-36 and 35-37 are only valid when the surrounding media have the same refractive index.
Physics 101 learning object 9
Thin film interference occurs when light waves reflect off the top and bottom surfaces of a thin film, causing constructive or destructive interference. This interference results in colorful patterns that depend on the film thickness and material. Constructive interference occurs when the film thickness is an integer multiple of half the wavelength, while destructive interference happens when the thickness is an integer plus half a wavelength. The phase of reflected light also shifts depending on whether the film's refractive index is smaller or larger than the medium below.
Double slit interference
- Young's double slit experiment demonstrated that light behaves as both a particle and wave
- When the extra distance light travels from one slit to the point on the screen is a whole number of wavelengths, constructive interference occurs and a bright fringe is seen
- Destructive interference happens when the extra distance is half a wavelength plus a whole number of wavelengths, appearing as a dark fringe
Interference In Waves
The document discusses interference patterns produced by double slits. When coherent light passes through double slits, it produces a characteristic interference pattern on a screen due to the overlapping waves constructively and destructively interfering. The separation of the bright and dark fringes can be calculated using the formula that relates the wavelength, slit separation, and distance to the screen. Examples are given to demonstrate calculating unknown values when some of the other variables are known. Similar principles of interference patterns apply to sound waves produced by two speakers.
Sound Waves: Relating Amplitude, Power and Intensity
My LO addresses the relationship between displacement amplitude, power and intensity of sound waves. I made a PowerPoint with a couple of problems that shows and works with this relationship to further understand it.
Nancy manhas lo9
Young's double-slit experiment was important for understanding the wave-particle duality of light. Light was shone through two slits and hit a screen, forming interference patterns of light and dark bands. This showed that light behaves as a wave that can interfere with itself. The experiment provided evidence against the particle theory of light and supported the idea that light is a wave. The document also includes an example calculation using the experiment's results to determine the wavelength of light.
Recommended
Double-Slit interference
Thomas Young's double-slit experiment demonstrated that light has wave-like properties by showing that light passing through two slits will produce an interference pattern of bright and dark fringes on a screen. The experiment found that the distance between fringes is determined by the wavelength of light and the distance between the slits and screen. Increasing the wavelength or distances between slits or screen decreases the fringe spacing. This relationship can be used to calculate unknown wavelengths from measured distances. For example, in an experiment using sodium light with 0.3mm slits 1.2m from a screen showing 2.4mm spaced fringes, the wavelength is calculated to be 589nm.
Lo6
The document summarizes the Young's double-slit experiment, which demonstrated that light has wave-like properties. It describes how constructive and destructive interference occurs when light passes through two slits, based on the wavelength of light and the geometry of the double-slit setup. The spacing between interference fringes is directly proportional to the wavelength of light and distance from the slits to the screen, and inversely proportional to the slit separation distance.
interference pattern
The equations are not directly applicable here because n1 ≠ n3. A more general approach is needed such as:
1) Calculate the reflection and transmission coefficients at each interface using Fresnel's equations.
2) Use the optical path length approach and phase changes to determine the net amplitude and phase for light reflecting from the front and back surfaces.
3) Combine using the principle of superposition to determine the net intensity.
The key is that the film thickness and refractive indices of all materials must be accounted for to determine the interference condition. Equations 35-36 and 35-37 are only valid when the surrounding media have the same refractive index.
Physics 101 learning object 9
Thin film interference occurs when light waves reflect off the top and bottom surfaces of a thin film, causing constructive or destructive interference. This interference results in colorful patterns that depend on the film thickness and material. Constructive interference occurs when the film thickness is an integer multiple of half the wavelength, while destructive interference happens when the thickness is an integer plus half a wavelength. The phase of reflected light also shifts depending on whether the film's refractive index is smaller or larger than the medium below.
Double slit interference
- Young's double slit experiment demonstrated that light behaves as both a particle and wave
- When the extra distance light travels from one slit to the point on the screen is a whole number of wavelengths, constructive interference occurs and a bright fringe is seen
- Destructive interference happens when the extra distance is half a wavelength plus a whole number of wavelengths, appearing as a dark fringe
Interference In Waves
The document discusses interference patterns produced by double slits. When coherent light passes through double slits, it produces a characteristic interference pattern on a screen due to the overlapping waves constructively and destructively interfering. The separation of the bright and dark fringes can be calculated using the formula that relates the wavelength, slit separation, and distance to the screen. Examples are given to demonstrate calculating unknown values when some of the other variables are known. Similar principles of interference patterns apply to sound waves produced by two speakers.
Sound Waves: Relating Amplitude, Power and Intensity
My LO addresses the relationship between displacement amplitude, power and intensity of sound waves. I made a PowerPoint with a couple of problems that shows and works with this relationship to further understand it.
Nancy manhas lo9
Young's double-slit experiment was important for understanding the wave-particle duality of light. Light was shone through two slits and hit a screen, forming interference patterns of light and dark bands. This showed that light behaves as a wave that can interfere with itself. The experiment provided evidence against the particle theory of light and supported the idea that light is a wave. The document also includes an example calculation using the experiment's results to determine the wavelength of light.
Physics 102 formal report interference
1. The document describes an experiment where lasers of different colors were shone through single and double slits to observe the resulting interference patterns of light. Calculations were done to determine the wavelengths of red and green lasers based on the interference patterns.
2. The key results were that the calculated wavelengths from the interference patterns matched closely with the actual wavelengths of the lasers, within low percentage errors. This provided evidence that light behaves as waves and interference occurs as predicted by the wave theory of light.
3. The double slit patterns were more distinct with uniform bright bands, while the single slit patterns had a blurrier central bright region that faded at the ends, demonstrating the different effects of single and double slit interference
Learning Objective 9 - Thin Film Interference
This powerpoint gives a brief description of thin film interference. It differentiates between destructive and constructive interferences, and outlines the primary formulas used to solve equations. In addition to the description of the concept are practice problems and detailed solutions.
2D wave interference
This document discusses two-dimensional interference patterns that arise when waves propagate in different directions. It explains that constructive interference occurs when the path difference between two waves is an integer multiple of the wavelength, causing the amplitudes to add. Destructive interference happens when the path difference is a half-integer multiple of the wavelength, reducing the amplitude. Formulas are provided for calculating the conditions of constructive and destructive interference between two waves.
Physics Investigatory Project Class 12
Ayush Kumar Suman of class 12 at Kendriya Vidyalaya Bina submitted an investigatory project on the phenomenon of diffraction of light under the supervision of teacher Pooja Patel. The project included sections on diffraction, diffraction patterns from single slits, double slits, and diffraction gratings. It explained how diffraction occurs when light passes through an opening and interferes to create characteristic patterns depending on the characteristics of the opening. The principal certified that Ayush completed the project with effort to fulfill the physics practical exam requirements.
Thin Film Interference Jennifer Whetter
This LO presents conditions for constructive and destructive thin film interference. An example of thin film interference in butter fly wings with a worked solution is provided to assist in application of the concepts and demonstrate the real life applications of this topic.
Physics Investigatory project on Diffraction
Physics investigatory project on Diffraction. Kendriya Vidyalaya physics investigatory project on Diffraction made by Saurabh Yadav a student of class 12.
Sound waves- Power and Intensity
This document discusses sound waves, power, intensity, and how they relate to distance from a sound source. It provides equations for power and intensity of sound waves. Power is the rate at which energy is delivered, while intensity is the power delivered per unit area. Intensity is inversely proportional to the square of the distance from an isotropic (uniformly radiating) source. The document includes a sample problem asking how the amplitude of sound waves observed by a person would change if the distance from the speaker doubled. The solution is that the amplitude would halve, since intensity, and thus amplitude, is inversely proportional to the square of the distance.
Physics Learning goal 9
Thomas Young performed an experiment in the early 19th century that proved light has wave properties by demonstrating the double-slit interference pattern. The experiment showed that light passing through two slits results in a pattern of bright and dark bands on a screen due to the constructive and destructive interference of the light waves. The angles of constructive and destructive interference can be calculated using equations that relate the wavelength, slit separation distance, and interference order.
Interference original
The document discusses interference of light waves. It defines key terms like phase difference, path difference, coherence and describes the principles of constructive and destructive interference. Interference in thin films of uniform and non-uniform thickness is explained. Specific applications of the wedge method are described, including determining the thickness of a paper or other thin film by measuring the fringe width in a wedge-shaped air film.
interference & diffraction
The document provides an overview of interference and diffraction concepts. It discusses interference due to thin films of uniform and non-uniform thickness. For thin films of uniform thickness, the conditions for constructive and destructive interference are derived based on the total path difference being equal to integral or half-integral multiples of wavelength. For wedge-shaped thin films of non-uniform thickness, the optical path difference expression is derived and the conditions for bright and dark fringes are obtained. Key features of interference patterns from wedge-shaped films like equidistant, straight and parallel fringes are also summarized.
Physics 101 LO4 - Power and Intensity
The document discusses sound power, intensity, and how intensity decreases with distance from the sound source. It defines power as the energy emitted by sound waves over time and intensity as the amount of energy carried by sound waves through a given area. Intensity is commonly referred to as loudness. While the energy of a sound wave remains constant with distance, the area it covers increases with distance from the source, causing intensity to decrease with the inverse square of the distance. Therefore, if the distance doubles, the intensity decreases by a factor of 4 and the amplitude halves.
Wave interference
The document discusses the concepts of constructive and destructive interference of waves. It provides explanations and examples of how interference patterns arise from differences in path lengths between two sources. It also includes sample problems calculating wavelengths and frequencies that would produce maximum or minimum intensity based on information about source locations and distances. The problems demonstrate how to apply the concepts of interference to real-world scenarios involving sound waves from multiple speakers.
LO4 PHYS 101 - Wave Power and Intensity
My learning object is meant to describe the definitions and formulas necessary to determine the various properties of a sound wave such as its power and intensity.
P5(wave optics) correction
The index of refraction of air is approximately 1. The Brewster's angle θB is given by tanθB = n2/n1.
Plugging in the values given, we get:
tanθB = 1.52/1
θB = arctan(1.52) = 56.3°
Therefore, the Brewster's angle when the glass plate (n2 = 1.52) is in air (n1 = 1) is 56.3°.
Double slit
Young's double-slit experiment demonstrated the wave-like properties of light. Coherent light was passed through two slits and an interference pattern of bright and dark fringes was observed on a screen. The path difference between light passing through each slit determines whether constructive or destructive interference occurs at a given point. Thomas Young developed an equation relating the path difference to the spacing and location of the interference fringes. Laser diffraction through single and double slits was compared, showing qualitative differences between the patterns.
Tau grp11 newton's rings
Newton's rings are an interference pattern caused when monochromatic light reflects off a spherical surface, like a lens, and an adjacent flat surface, like a glass sheet. This forms a thin air film between the surfaces that varies in thickness. At points of constructive interference, bright rings appear; at points of destructive interference, dark rings appear. The spacing between the rings gets smaller further from the center. The formula for the radius of the nth bright ring is derived from considering the optical path difference between light reflecting off the two surfaces.
Physics learning object 9
Young's double-slit experiment provided evidence that light behaves as a wave. When monochromatic light passes through two slits, an interference pattern is observed on a viewing screen. The pattern can be explained by the principles of constructive and destructive interference as the light waves pass through the slits. The mathematical relationships governing the angles at which interference maxima occur depend on the wavelength of light and the slit separation distance.
9.3 interference
Interference occurs when two or more waves pass through the same space and can be constructive or destructive. Constructive interference occurs when waves are in phase and amplitudes add, while destructive interference occurs when waves are out of phase and amplitudes cancel. Light interference can be observed using Young's double slit experiment, which uses a coherent monochromatic light source like a laser. The experiment produces bright and dark interference fringes that can be used to determine wavelength according to the equation dsinθ=mλ. Diffraction gratings produce sharper interference patterns than double slits and allow measuring the wavelengths of light in a spectrum.
Wave properties
Waves can be categorized as mechanical or electromagnetic. Mechanical waves require a medium to travel through, while electromagnetic waves do not. Waves can also be transverse or longitudinal depending on the direction of particle oscillation relative to wave propagation. Important wave properties include amplitude, wavelength, frequency, and speed. Reflection, refraction, diffraction, interference, and polarization are key wave phenomena. Reflection follows the laws of reflection, while refraction follows Snell's law. Diffraction and interference result in constructive and destructive patterns. Polarization occurs when waves vibrate in a single plane. Waves have many applications including ultrasound imaging, fiber optics, and 3D displays.
IB Physics Resolution flippingphysics by Nothingnerdy
IB Physics Resolution flippingphysics slideshow for HL Wave Phenomena section; also SL Sight and Waves option.
First Math PowerPoint
This short slideshow was created by Mrs. Donais as an experiment for her Math Blog for grade 2/3 students. It contains a few slides about shapes, including one rhombus, quadrilaterals, and symmetry, as well as a true/false question about a pheasant chick's mass. One slide asks students to identify if a representation of Wheatley is 2D or 3D. The slideshow encourages students to post a comment on the Blog with their thoughts.
Math Trivia Game
This document contains a math trivia quiz with multiple choice questions in categories like fractions, addition, division, multiplication, subtraction, and a wild card category. The quiz tests skills like dividing pies between people, doubling recipes, adding multiple numbers, dividing numbers, multiplying one and two-digit numbers, subtracting larger numbers, and identifying right triangles and calculating area of a shape. The document provides the questions, multiple choice answers to select from, and then reveals the correct answers. It congratulates the player at the end for completing the quiz.
More Related Content
What's hot
Physics 102 formal report interference
1. The document describes an experiment where lasers of different colors were shone through single and double slits to observe the resulting interference patterns of light. Calculations were done to determine the wavelengths of red and green lasers based on the interference patterns.
2. The key results were that the calculated wavelengths from the interference patterns matched closely with the actual wavelengths of the lasers, within low percentage errors. This provided evidence that light behaves as waves and interference occurs as predicted by the wave theory of light.
3. The double slit patterns were more distinct with uniform bright bands, while the single slit patterns had a blurrier central bright region that faded at the ends, demonstrating the different effects of single and double slit interference
Learning Objective 9 - Thin Film Interference
This powerpoint gives a brief description of thin film interference. It differentiates between destructive and constructive interferences, and outlines the primary formulas used to solve equations. In addition to the description of the concept are practice problems and detailed solutions.
2D wave interference
This document discusses two-dimensional interference patterns that arise when waves propagate in different directions. It explains that constructive interference occurs when the path difference between two waves is an integer multiple of the wavelength, causing the amplitudes to add. Destructive interference happens when the path difference is a half-integer multiple of the wavelength, reducing the amplitude. Formulas are provided for calculating the conditions of constructive and destructive interference between two waves.
Physics Investigatory Project Class 12
Ayush Kumar Suman of class 12 at Kendriya Vidyalaya Bina submitted an investigatory project on the phenomenon of diffraction of light under the supervision of teacher Pooja Patel. The project included sections on diffraction, diffraction patterns from single slits, double slits, and diffraction gratings. It explained how diffraction occurs when light passes through an opening and interferes to create characteristic patterns depending on the characteristics of the opening. The principal certified that Ayush completed the project with effort to fulfill the physics practical exam requirements.
Thin Film Interference Jennifer Whetter
This LO presents conditions for constructive and destructive thin film interference. An example of thin film interference in butter fly wings with a worked solution is provided to assist in application of the concepts and demonstrate the real life applications of this topic.
Physics Investigatory project on Diffraction
Physics investigatory project on Diffraction. Kendriya Vidyalaya physics investigatory project on Diffraction made by Saurabh Yadav a student of class 12.
Sound waves- Power and Intensity
This document discusses sound waves, power, intensity, and how they relate to distance from a sound source. It provides equations for power and intensity of sound waves. Power is the rate at which energy is delivered, while intensity is the power delivered per unit area. Intensity is inversely proportional to the square of the distance from an isotropic (uniformly radiating) source. The document includes a sample problem asking how the amplitude of sound waves observed by a person would change if the distance from the speaker doubled. The solution is that the amplitude would halve, since intensity, and thus amplitude, is inversely proportional to the square of the distance.
Physics Learning goal 9
Thomas Young performed an experiment in the early 19th century that proved light has wave properties by demonstrating the double-slit interference pattern. The experiment showed that light passing through two slits results in a pattern of bright and dark bands on a screen due to the constructive and destructive interference of the light waves. The angles of constructive and destructive interference can be calculated using equations that relate the wavelength, slit separation distance, and interference order.
Interference original
The document discusses interference of light waves. It defines key terms like phase difference, path difference, coherence and describes the principles of constructive and destructive interference. Interference in thin films of uniform and non-uniform thickness is explained. Specific applications of the wedge method are described, including determining the thickness of a paper or other thin film by measuring the fringe width in a wedge-shaped air film.
interference & diffraction
The document provides an overview of interference and diffraction concepts. It discusses interference due to thin films of uniform and non-uniform thickness. For thin films of uniform thickness, the conditions for constructive and destructive interference are derived based on the total path difference being equal to integral or half-integral multiples of wavelength. For wedge-shaped thin films of non-uniform thickness, the optical path difference expression is derived and the conditions for bright and dark fringes are obtained. Key features of interference patterns from wedge-shaped films like equidistant, straight and parallel fringes are also summarized.
Physics 101 LO4 - Power and Intensity
The document discusses sound power, intensity, and how intensity decreases with distance from the sound source. It defines power as the energy emitted by sound waves over time and intensity as the amount of energy carried by sound waves through a given area. Intensity is commonly referred to as loudness. While the energy of a sound wave remains constant with distance, the area it covers increases with distance from the source, causing intensity to decrease with the inverse square of the distance. Therefore, if the distance doubles, the intensity decreases by a factor of 4 and the amplitude halves.
Wave interference
The document discusses the concepts of constructive and destructive interference of waves. It provides explanations and examples of how interference patterns arise from differences in path lengths between two sources. It also includes sample problems calculating wavelengths and frequencies that would produce maximum or minimum intensity based on information about source locations and distances. The problems demonstrate how to apply the concepts of interference to real-world scenarios involving sound waves from multiple speakers.
LO4 PHYS 101 - Wave Power and Intensity
My learning object is meant to describe the definitions and formulas necessary to determine the various properties of a sound wave such as its power and intensity.
P5(wave optics) correction
The index of refraction of air is approximately 1. The Brewster's angle θB is given by tanθB = n2/n1.
Plugging in the values given, we get:
tanθB = 1.52/1
θB = arctan(1.52) = 56.3°
Therefore, the Brewster's angle when the glass plate (n2 = 1.52) is in air (n1 = 1) is 56.3°.
Double slit
Young's double-slit experiment demonstrated the wave-like properties of light. Coherent light was passed through two slits and an interference pattern of bright and dark fringes was observed on a screen. The path difference between light passing through each slit determines whether constructive or destructive interference occurs at a given point. Thomas Young developed an equation relating the path difference to the spacing and location of the interference fringes. Laser diffraction through single and double slits was compared, showing qualitative differences between the patterns.
Tau grp11 newton's rings
Newton's rings are an interference pattern caused when monochromatic light reflects off a spherical surface, like a lens, and an adjacent flat surface, like a glass sheet. This forms a thin air film between the surfaces that varies in thickness. At points of constructive interference, bright rings appear; at points of destructive interference, dark rings appear. The spacing between the rings gets smaller further from the center. The formula for the radius of the nth bright ring is derived from considering the optical path difference between light reflecting off the two surfaces.
Physics learning object 9
Young's double-slit experiment provided evidence that light behaves as a wave. When monochromatic light passes through two slits, an interference pattern is observed on a viewing screen. The pattern can be explained by the principles of constructive and destructive interference as the light waves pass through the slits. The mathematical relationships governing the angles at which interference maxima occur depend on the wavelength of light and the slit separation distance.
9.3 interference
Interference occurs when two or more waves pass through the same space and can be constructive or destructive. Constructive interference occurs when waves are in phase and amplitudes add, while destructive interference occurs when waves are out of phase and amplitudes cancel. Light interference can be observed using Young's double slit experiment, which uses a coherent monochromatic light source like a laser. The experiment produces bright and dark interference fringes that can be used to determine wavelength according to the equation dsinθ=mλ. Diffraction gratings produce sharper interference patterns than double slits and allow measuring the wavelengths of light in a spectrum.
Wave properties
Waves can be categorized as mechanical or electromagnetic. Mechanical waves require a medium to travel through, while electromagnetic waves do not. Waves can also be transverse or longitudinal depending on the direction of particle oscillation relative to wave propagation. Important wave properties include amplitude, wavelength, frequency, and speed. Reflection, refraction, diffraction, interference, and polarization are key wave phenomena. Reflection follows the laws of reflection, while refraction follows Snell's law. Diffraction and interference result in constructive and destructive patterns. Polarization occurs when waves vibrate in a single plane. Waves have many applications including ultrasound imaging, fiber optics, and 3D displays.
IB Physics Resolution flippingphysics by Nothingnerdy
IB Physics Resolution flippingphysics slideshow for HL Wave Phenomena section; also SL Sight and Waves option.
What's hot (20)
IB Physics Resolution flippingphysics by Nothingnerdy
IB Physics Resolution flippingphysics by Nothingnerdy
Viewers also liked
First Math PowerPoint
This short slideshow was created by Mrs. Donais as an experiment for her Math Blog for grade 2/3 students. It contains a few slides about shapes, including one rhombus, quadrilaterals, and symmetry, as well as a true/false question about a pheasant chick's mass. One slide asks students to identify if a representation of Wheatley is 2D or 3D. The slideshow encourages students to post a comment on the Blog with their thoughts.
Math Trivia Game
This document contains a math trivia quiz with multiple choice questions in categories like fractions, addition, division, multiplication, subtraction, and a wild card category. The quiz tests skills like dividing pies between people, doubling recipes, adding multiple numbers, dividing numbers, multiplying one and two-digit numbers, subtracting larger numbers, and identifying right triangles and calculating area of a shape. The document provides the questions, multiple choice answers to select from, and then reveals the correct answers. It congratulates the player at the end for completing the quiz.
How To Do Long Division!!!
The document provides instructions for how to do long division. It begins with an outline and then explains the mnemonic device "Daddy, Mommy, Sister, Brother" to remember the steps of long division. It demonstrates working through a long division problem step-by-step using this mnemonic device. Finally, it describes how to check your work by multiplying the quotient and divisor, and adding the remainder.
The steps in long division
This document provides instructions for the steps of long division in 5 sentences or less:
1) The steps of long division are: Does (divide), McDonalds (multiply), Sell (subtract), Cheese (check), and Burgers (bring down).
2) For each step: determine how many times the divisor goes into the first part of the dividend (Does), multiply and write the product below (McDonalds), subtract the product from the dividend (Sell), check if the difference is less than the divisor (Cheese), then bring down the next digit (Burgers).
3) If the difference is zero and there are no more digits, the problem is solved.
division
The document describes making various numbers of items (e.g. sausages, buttons) and sharing them equally across plates, cakes, leaves, etc. It asks how many items there are altogether and how many are on each plate/cake/leaf. The numbers are then divided to show the equal distribution.
Long Division Tutorial
This document provides instructions for long division. It explains the steps of long division using the mnemonic "Do Monkeys Sniff Brown Rats" to represent Divide, Multiply, Subtract, Bring Down, and Repeat/Remainder. It then works through a sample long division problem step-by-step to demonstrate how to correctly apply the long division process.
Long division
Long division involves repeatedly dividing, multiplying, subtracting, and bringing down remaining digits. Specifically, the steps are: 1) Divide the dividend by the divisor to find the quotient, 2) Multiply the divisor by the quotient, 3) Subtract to find the remainder, 4) Check that the remainder is smaller than the divisor, and 5) Bring down remaining digits and repeat the process until there is no remainder. The document provides examples of working through long division problems step-by-step and reviews the key steps.
Interactive Math And Science Websites
This document provides a long list of links to interactive websites for math, science, and other subjects for K-12 education. It includes over 100 links organized by subject, grade level, and resource type. The links provide access to virtual manipulatives, lessons, activities, games, simulations and more. Subjects covered include math, science, vocabulary, and test preparation for topics across multiple grades.
Slideshare ppt
Miss goodheart created a PowerPoint to test out the Slideshare tool, which was introduced to her by Sharon Tonner on January 20th, 2011.
Viewers also liked (9)
Recently uploaded
The Diamonds of 2023-2024 in the IGRA collection
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
BBR 2024 Summer Sessions Interview Training
Qualitative research interview training by Professor Katrina Pritchard and Dr Helen Williams
The History of Stoke Newington Street Names
Presented at the Stoke Newington Literary Festival on 9th June 2024
www.StokeNewingtonHistory.com
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Iván Bornacelly, Policy Analyst at the OECD Centre for Skills, OECD, presents at the webinar 'Tackling job market gaps with a skills-first approach' on 12 June 2024
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...Nguyen Thanh Tu Collection
https://app.box.com/s/qhtvq32h4ybf9t49ku85x0n3xl4jhr15How to Fix the Import Error in the Odoo 17
An import error occurs when a program fails to import a module or library, disrupting its execution. In languages like Python, this issue arises when the specified module cannot be found or accessed, hindering the program's functionality. Resolving import errors is crucial for maintaining smooth software operation and uninterrupted development processes.
ANATOMY AND BIOMECHANICS OF HIP JOINT.pdf
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...National Information Standards Organization (NISO)
This presentation was provided by Steph Pollock of The American Psychological Association’s Journals Program, and Damita Snow, of The American Society of Civil Engineers (ASCE), for the initial session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session One: 'Setting Expectations: a DEIA Primer,' was held June 6, 2024.How to Create a More Engaging and Human Online Learning Experience
How to Create a More Engaging and Human Online Learning Experience Wahiba Chair Training & Consulting
Wahiba Chair's Talk at the 2024 Learning Ideas Conference. ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
How to Make a Field Mandatory in Odoo 17
In Odoo, making a field required can be done through both Python code and XML views. When you set the required attribute to True in Python code, it makes the field required across all views where it's used. Conversely, when you set the required attribute in XML views, it makes the field required only in the context of that particular view.
Recently uploaded (20)
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Liberal Approach to the Study of Indian Politics.pdf
Liberal Approach to the Study of Indian Politics.pdf
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...
Digital Artefact 1 - Tiny Home Environmental Design
Digital Artefact 1 - Tiny Home Environmental Design
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
How to Create a More Engaging and Human Online Learning Experience
How to Create a More Engaging and Human Online Learning Experience
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...