Matchless Enterprises - Our design Engineers are conversant with 2D drafting and 3 D modeling.
Our Main Activities are –
a) 2 D manufacturing drawings from G.A. Drawings
b) 3 D parametric Modeling and 2 D manufacturing drawings from hand drawn drawings
1. SURVEY NO 39/1A, WADGAON (BK)
MANIK BAUG, SINHAGAD ROAD,
PUNE – 411051 INDIA.
TEL/FAX – 020 24355940
SITE –www.matchlessenterprises.com
E-MAILS – dsd@matchlessenterprises.com,
matchlessent@vsnl.net and matchless@bsnl.in
PROPRIETOR – D.S.DIWANJI
CELL - 9822018208
2. About us
• Matchless Enterprises was established in Nov 1985
to develop Import substitute spare parts and
subassemblies
for
Textile,
Chemical,
Pharmaceutical and Food processing Industries.
• Over the period of time, our design capabilities
improved and we started to undertake independent
design projects.
3. 1) Manufacturing Activities
• We have a modern machine shop set up and
adequate fabrication set up. Our workforce is
qualified and experienced.
• Our main activities are - a) designing and
development of Custom made machinery,
b)modifications and improvement in existing
machines c) repairs and maintenance of existing
machines d) development of spares.
4. 2) Design Activities
• We have excellent design set up with latest machines and
softwares. Our design department is conversant with 3 D
modeling softwares such as Pro Engineers, Solid Works and
Catia.
• Our Main Activities are – a) 2 D manufacturing drawings
from G.A. Drawings
• b) 3 D solid Modeling and 2 D manufacturing drawings from
hand drawn drawings
• c) 3 D solid modeling from 2 D drawings for analysis
• d) 3 D cosmetic models (only external shape and dimensions
considered ) for Layout checking or for marketing purpose
or for erection manual.
5. ADVANTAGES OF
3D SOLID MODELING
Layout
Checking
Analysis
Marketing
Preparation of
manuals
Assembly Checking
Casting/Odd shapes
Checking
6. ADVANTAGES
1. Layout Checking :
By preparing models of
structure and machines
and placing the same as
per G.A.Fouling of
machinery/Chutes/Pipes
etc. with Main structure &
with each other can be
checked, identified and
corrected.Once models of
structure and machines are
ready, pipe routing
becomes easy.
7. ADVANTAGES
2.PIPING-EXTRACTION LAYOUT
ONCE MODEL OF STRUCTURE, MACHINES AND PIPING
IS READY PIPE ROUTING FOR DUST EXTRACTION
BECOMES VERY EASY.FOULING OF DUCTS WITH
EXISTING PIPING/STRUCTURE/MACHINES CAN BE
TOTALLY AVOIDED,FAN LOAD CAN BE MINIMIZED BY
PROPER SIZING & LAYING OF PIPES & DUCTS.
8. ADVANTAGES
3.Analysis Once Midplane model is ready
then the same can be
tested on Ansys/ Nastran
by applying appropriate
loads. Higher thickness
can be rationalized,
leading to weight reduction
and cost saving.
9. ADVANTAGES
4. Marketing :
By preparing model of
entire plant or new
expansion,
visualization
becomes easy and
likely hood of getting
order increases.