Masoud abshar-battery-less-smoothing-of-solar-pv-generation
•
0 likes•99 views
This document discusses Magellan Power's battery-less solar PV generation smoothing system. The system uses reactive and proactive smoothing techniques to reduce the intermittent variations in power output from solar PV arrays without using batteries. It works by using stereo vision and cloud classification to predict changes in solar irradiance and adjust the power output from the solar inverter proactively to provide a smoothed output to the electrical grid. The system provides generation management capabilities that can help integrate more solar power onto the grid.
Report
Share
Report
Share
Download to read offline
Recommended
Pavegen seminar ppt.
This document describes Pavegen technology, which generates electricity from footsteps. Pavegen tiles convert the kinetic energy from walking or running into electric power using piezoelectric elements. They have applications in crowded areas like airports, bus stations, and sidewalks to power devices like pedestrian lighting. The tiles are made from recycled materials and can reduce CO2 emissions by harvesting human kinetic energy. While the technology is still developing, Pavegen aims to provide a renewable energy source using kinetic energy from human movement.
power generation through foot step
This document presents a footstep power generation system that uses piezoelectric materials to convert the mechanical energy from human footsteps into electrical energy. It discusses the components required, including piezoelectric crystals, batteries, capacitors, and an inverter. The working principle is that piezoelectric materials generate a charge when pressure is applied, allowing the system to harness energy from walking. Applications include powering lights and devices in areas with foot traffic like schools, malls, and metro stations. The system has advantages of being eco-friendly and self-generating, but high initial costs and limited applicability in only one location.
foor step power generation ppt
This document describes a system for generating electricity from footstep power. It consists of a piezoelectric sensor that converts force from footsteps into electrical energy, which is then regulated and stored in a battery. An inverter is used to convert the DC power from the battery to AC power that can run loads. The system has applications in powering small devices for agriculture, homes, street lighting, or as a backup power source in rural areas or during outages.
Introduction to energy storage
Provides electricity grid basics, why energy storage is needed, describes the behind-the-meter application, and highlights solution for commercial and industrial,
Footsteppowergenerator 140707114713-phpapp01
This document describes a system for generating electricity from footstep power. The system uses piezoelectric sensors beneath footstep platforms to convert the kinetic energy from footsteps into electrical energy, which is stored in a lead-acid battery. An inverter then converts the DC battery voltage to AC voltage that can power various loads. The system has applications for powering lights and devices in areas with high foot traffic like streets, railways, temples, and more. It provides a renewable energy source without requiring fuel inputs.
FOOT STEP POWER GENERATION
This document presents a seminar on footstep power generation systems. It introduces piezoelectric materials that can generate electric charges when pressure is applied. The system works by using piezoelectric transducers under a footstep arrangement to convert mechanical energy from footsteps into electrical energy. This variable voltage is stabilized and stored in a battery, then inverted to AC power. Footstep power generation has advantages like being renewable, eco-friendly, and requiring no external power or much maintenance. However, it also has high initial costs and implementation challenges. Potential applications include emergency power, agriculture, homes, and street lighting.
Vikram
Hello Mam,
We are the student of b.tech mechanical engg. we make foot step electricity genarator when we press the top of the project the spring is press the mechanical setup of project is working the rack and pinoin is connect to the shaft is connect to pully is connect to dianoma with help v velt when we pressure the top of the project the rack and pinion is rotating the shaft is rotating to the pully to rotating to dynoma is rotted produce the electricity and we optain the electricity by the system
Recommended
Pavegen seminar ppt.
This document describes Pavegen technology, which generates electricity from footsteps. Pavegen tiles convert the kinetic energy from walking or running into electric power using piezoelectric elements. They have applications in crowded areas like airports, bus stations, and sidewalks to power devices like pedestrian lighting. The tiles are made from recycled materials and can reduce CO2 emissions by harvesting human kinetic energy. While the technology is still developing, Pavegen aims to provide a renewable energy source using kinetic energy from human movement.
power generation through foot step
This document presents a footstep power generation system that uses piezoelectric materials to convert the mechanical energy from human footsteps into electrical energy. It discusses the components required, including piezoelectric crystals, batteries, capacitors, and an inverter. The working principle is that piezoelectric materials generate a charge when pressure is applied, allowing the system to harness energy from walking. Applications include powering lights and devices in areas with foot traffic like schools, malls, and metro stations. The system has advantages of being eco-friendly and self-generating, but high initial costs and limited applicability in only one location.
foor step power generation ppt
This document describes a system for generating electricity from footstep power. It consists of a piezoelectric sensor that converts force from footsteps into electrical energy, which is then regulated and stored in a battery. An inverter is used to convert the DC power from the battery to AC power that can run loads. The system has applications in powering small devices for agriculture, homes, street lighting, or as a backup power source in rural areas or during outages.
Introduction to energy storage
Provides electricity grid basics, why energy storage is needed, describes the behind-the-meter application, and highlights solution for commercial and industrial,
Footsteppowergenerator 140707114713-phpapp01
This document describes a system for generating electricity from footstep power. The system uses piezoelectric sensors beneath footstep platforms to convert the kinetic energy from footsteps into electrical energy, which is stored in a lead-acid battery. An inverter then converts the DC battery voltage to AC voltage that can power various loads. The system has applications for powering lights and devices in areas with high foot traffic like streets, railways, temples, and more. It provides a renewable energy source without requiring fuel inputs.
FOOT STEP POWER GENERATION
This document presents a seminar on footstep power generation systems. It introduces piezoelectric materials that can generate electric charges when pressure is applied. The system works by using piezoelectric transducers under a footstep arrangement to convert mechanical energy from footsteps into electrical energy. This variable voltage is stabilized and stored in a battery, then inverted to AC power. Footstep power generation has advantages like being renewable, eco-friendly, and requiring no external power or much maintenance. However, it also has high initial costs and implementation challenges. Potential applications include emergency power, agriculture, homes, and street lighting.
Vikram
Hello Mam,
We are the student of b.tech mechanical engg. we make foot step electricity genarator when we press the top of the project the spring is press the mechanical setup of project is working the rack and pinoin is connect to the shaft is connect to pully is connect to dianoma with help v velt when we pressure the top of the project the rack and pinion is rotating the shaft is rotating to the pully to rotating to dynoma is rotted produce the electricity and we optain the electricity by the system
Foot step power generation,free energy,electrical energy
Generation of electrical power by non-conventional method
• Nonconventional energy using foot step is converting mechanical energy into the electric al energy
Piezoelectric Effect is the ability of certain materials to generate an electric charge in response to applied mechanical stress. The word Piezoelectric is derived from the Greek piezein, which means to squeeze or press, and piezo, which is Greek for “push”.
The pushing power is converted into electrical energy by proper driving arrangement. The rack & pinion, spring arrangement is fixed at the inclined step. The spring is used to return the inclined step in the same position by releasing the load. The pinion shaft is connected to the supporter by end bearings as shown in fig. The larger sprocket also coupled with the pinion shaft, so that it is running the same speed of the pinion. The larger sprocket is coupled to the small cycle sprocket with the help of chain (cycle). This larger sprocket is used to transfer the rotation force to the smaller sprocket. The smaller sprocket is running the same direction of the forward and reverse direction of rotational movement of the larger sprocket. This action looks like a cycle pedaling action.
Foot path
This document describes a proposed system to generate electricity from foot traffic on a vibrating footpath. The system uses Faraday's law of induction - as people walk on the platform, their footsteps cause it to vibrate, generating a changing magnetic field that can be captured to produce a small amount of electricity. Key components include a step-up transformer to boost the low voltage, rectification circuitry to convert AC to DC, an LED indicator light, and a digital meter to measure output. The system aims to supplement power supplies in a low-cost, simple way without relying on weather conditions.
IEEE 2013 MATLAB EEE PROJECT LIST
This document lists 38 M.Tech projects related to power systems, power electronics, and drives that were presented at IEEE conferences in 2013. It provides contact information for Vision Solutions, an organization in Hyderabad, Vijayawada, and Guntur, India that works with IEEE standards and specializes in these project areas. The projects cover topics like solar power generation, DC-DC converters, motor drives, grid integration of renewable energy, and control of power electronic converters.
Foot step power generation.ppt
FOOT STEP POWER GENERATION IS MODERN METHOD OF GENERATE ELECTRICITY WITHOUT WASTING ANY FUEL SOURCE.
Power generating system by footstep
This presentation is on generating power from our footsteps. It is a very easy and simple method to generate power.
Foot step power generator
This document describes a footstep power generation system that converts the mechanical energy from walking or running into electrical energy using piezoelectric sensors. The electrical energy is stored in a lead acid battery and can be used to power AC and DC loads. An inverter converts the DC battery voltage to AC voltage. The system provides a low-cost renewable energy solution that could power rural applications and emergency situations by harvesting wasted human biomechanical energy.
A high step up converter with voltage
This document presents a novel isolated high step-up converter using an adjustable voltage-multiplier module for sustainable energy applications. The voltage-multiplier modules are composed of coupled inductors and switched capacitors to achieve a high step-up gain without a large duty ratio or turns ratio. Due to passive lossless clamped performance, leakage energy is recycled to reduce voltage spikes and improve efficiency while allowing use of lower voltage switches. The isolated topology satisfies safety regulations and provides continuous smooth input current to decrease losses and electromagnetic interference.
Piezoelectric Energy Harvester - Capstone Design
•The complete design of a real size piezoelectric system, enabling to harvest from roads and generate, store, and supply electricity to light up street lights.
•Sizing and construction of a scaled down prototype of the real size piezoelectric energy harvesting system, Storage of electrical energy outputted from system, supplying power to the load and smart system, Power monitoring system to monitor energy stored, supplied, and outputted.
•Complete PCB Design and circuit board building in accordance with Arduino UNO Rev-3 on EagleCAD as well as LCD to display readings.
•Prototype commissioning and performance testing of entire system comprised of 3 main subsystems: Generation, Power Storage, and Power Monitoring System
FOOT STEP POWER GENERATION
In this project we are generating electrical energy by means of a non- conventional method just by walking on the footsteps. Non conventional system for energies are very much required at this time. Energy generation using footsteps requires no any fuel input to generate electricity. In this project we are generating electricity just with the help of rack and pinion arrangement along with alternator and chain drive mechanism.
For its proper functioning such that it converts Force into electrical energy, the mechanism consists of rack & pinion, chain drives, alternator and battery. We have discussed its various alternate applications with extension also. The power generation is much worthy but it has little initial cost effective factors.
Footstep power generating system
This document describes a footstep power generation system that converts the kinetic energy from human footsteps into usable electricity. The system uses an array of piezoelectric sensors that generate voltage when pressure is applied. The voltage is stored in a lead-acid battery and can be used to power small DC loads. A microcontroller and LCD display are used to indicate the voltage level being stored in the battery. The system was designed and implemented to harvest wasted energy from human locomotion and demonstrate piezoelectric energy harvesting.
final year embedded systems projects in chennai
We provide all types of projects like EEE projects, embedded projects, mechanical projects, labview projects, java project, robotic projects, vlsi projects,ECE projects, software and final year projects for diploma and engineering students in chennai and bangalore.
Must ppt
This document presents a project on developing a hybrid power plant using vertical-axis wind turbines and solar panels. The aim is to provide a renewable energy source for electricity in remote, off-grid areas. A prototype was designed and built that uses a VAWT to generate AC voltage which is rectified to DC to charge batteries. Solar panels also generate DC voltage. A switch assembly allows power from the VAWT and solar panels to combine or be used individually to power a DC motor. The system provides a reliable renewable energy source and energy storage for locations without access to the electric grid.
IRJET- Foot Step Power Generation
This document describes a system that generates electricity from the kinetic energy of human footsteps. The system uses a rack and pinion mechanism to convert the vertical motion of footsteps into rotational motion. Gears, chains, and sprockets transfer this rotational motion to power a dynamo, which generates electricity. The electricity is stored in a battery. The system aims to harvest energy from places with high foot traffic to generate useful power and reduce dependency on conventional energy sources. It provides a clean, renewable method of small-scale power generation using wasted kinetic energy from human movement.
Energy harvesting through footsteps
Presentation on a concept of "energy harvesting through footsteps" made as part of a project on alternate energy at Noorul Islam University
IRJET- Foot Step Power Generation
This document describes a design for generating electricity from human foot steps. The system uses a rack and pinion mechanism along with a sprocket and chain drive to convert the linear motion of footsteps into rotational motion. This rotational motion spins a DC generator to produce electricity. The electricity is stored in a battery. Key components of the system include a speed brake arrangement, rack and pinion gears, sprockets and chain drive, flywheel, DC generator, and battery. When installed in areas with heavy foot traffic, this design could generate significant amounts of renewable energy from an underutilized source.
Regenerative braking sytem
This document discusses regenerative braking systems. It begins by explaining conventional braking systems, noting that they waste up to 30% of a car's generated power as heat. It then describes how regenerative braking systems work, funneling the energy created during braking back into the battery. The key components are identified as the brake drum, friction lining, controller, electric generator, and linking mechanism. Diagrams are provided to illustrate how the energy is transferred back to the battery during braking. Advantages include reduced pollution and increased engine life by reducing energy waste, while disadvantages include added weight and costs. Regenerative braking has applications in electric vehicles and transportation systems to recover kinetic energy lost during deceleration.
Major project synopsis ON FOOT STEP POWER GENERATION
This document summarizes a student project that aims to generate electricity from footstep power. The project converts the kinetic energy from walking or running on an inclined stepping plate into electrical energy using a rack and pinion mechanism connected to a generator. The generated DC power is stored in a battery and then converted to AC power using an inverter. Potential applications include power generation in places with many footfalls like colleges, shopping complexes, and transportation hubs to provide a renewable source of electricity.
Solar doc
The document proposes a "Future House" that is fully electrified using a photovoltaic (solar) power system. It includes a floor plan of the house and discusses designing and installing the PV system. The PV system would provide all of the house's electricity through solar panels on the roof. It describes the typical components of a grid-interactive PV system without battery backup, including solar panels, mounting equipment, inverters, and meters. The document also discusses factors that affect the output of a PV system like sunlight availability and shading.
Solar wind hybrid power system ppt
The document summarizes the design and development of a solar-wind hybrid power system by two students at Edith Cowan University under the supervision of Dr. Laichang Zhang. It outlines the objectives to generate continuous power from both wind and solar sources. The design process is documented, including different design stages, testing results, specifications of the solar panel and wind turbine, challenges faced, lessons learned, and future work. The final system was able to generate 120W of power, though the original goal was 200W, due to losses. The project provides an efficient way to harness renewable energy sources.
How to Deploy Energy Storage Technology at the Enterprise Level – Case Study
The financial justification for the roll out of battery based storage technology to large and medium sized companies is becoming increasingly compelling. Such systems will allow time shifting of demand enabling an enterprise to take advantage of low priced electricity as well as avoiding expensive electricity and surcharges during periods of high network usage. These benefits can be enjoyed by the enterprise without the need to resort to demand reduction which could impact on the operation of the business. This session focusses on the choices and options concerning the deployment of battery based storage systems and how this new technology can be cost effectively rolled out, at enterprise level, illustrated with some case studies of deployed systems.
Top 4 solar batteries
The document summarizes and compares 4 top solar battery options:
1. LG Chem batteries which offer industry-leading power and efficiency as well as a compact and lightweight design for easy installation.
2. BYD batteries which have over 300MWh of batteries in service and offer over 6,000 cycles of battery life.
3. Solax batteries which are produced in partnership with LG Chem and offer a 6000 cycle lifespan with a 10 year warranty and 95% depth of discharge.
4. Tesla Powerwall 2 which provides solar self-consumption, time of use load shifting, backup power and is safe, maintenance-free with a sleek design.
Battery Storage Can Work in Every Level from Large to Small Companies to SMEs
Batteries could be set to revolutionise the way we use the grid. The commercial sector only represents around 30% of electricity used. Is the secret to balancing the grid in the domestic sector?
More Related Content
What's hot
Foot step power generation,free energy,electrical energy
Generation of electrical power by non-conventional method
• Nonconventional energy using foot step is converting mechanical energy into the electric al energy
Piezoelectric Effect is the ability of certain materials to generate an electric charge in response to applied mechanical stress. The word Piezoelectric is derived from the Greek piezein, which means to squeeze or press, and piezo, which is Greek for “push”.
The pushing power is converted into electrical energy by proper driving arrangement. The rack & pinion, spring arrangement is fixed at the inclined step. The spring is used to return the inclined step in the same position by releasing the load. The pinion shaft is connected to the supporter by end bearings as shown in fig. The larger sprocket also coupled with the pinion shaft, so that it is running the same speed of the pinion. The larger sprocket is coupled to the small cycle sprocket with the help of chain (cycle). This larger sprocket is used to transfer the rotation force to the smaller sprocket. The smaller sprocket is running the same direction of the forward and reverse direction of rotational movement of the larger sprocket. This action looks like a cycle pedaling action.
Foot path
This document describes a proposed system to generate electricity from foot traffic on a vibrating footpath. The system uses Faraday's law of induction - as people walk on the platform, their footsteps cause it to vibrate, generating a changing magnetic field that can be captured to produce a small amount of electricity. Key components include a step-up transformer to boost the low voltage, rectification circuitry to convert AC to DC, an LED indicator light, and a digital meter to measure output. The system aims to supplement power supplies in a low-cost, simple way without relying on weather conditions.
IEEE 2013 MATLAB EEE PROJECT LIST
This document lists 38 M.Tech projects related to power systems, power electronics, and drives that were presented at IEEE conferences in 2013. It provides contact information for Vision Solutions, an organization in Hyderabad, Vijayawada, and Guntur, India that works with IEEE standards and specializes in these project areas. The projects cover topics like solar power generation, DC-DC converters, motor drives, grid integration of renewable energy, and control of power electronic converters.
Foot step power generation.ppt
FOOT STEP POWER GENERATION IS MODERN METHOD OF GENERATE ELECTRICITY WITHOUT WASTING ANY FUEL SOURCE.
Power generating system by footstep
This presentation is on generating power from our footsteps. It is a very easy and simple method to generate power.
Foot step power generator
This document describes a footstep power generation system that converts the mechanical energy from walking or running into electrical energy using piezoelectric sensors. The electrical energy is stored in a lead acid battery and can be used to power AC and DC loads. An inverter converts the DC battery voltage to AC voltage. The system provides a low-cost renewable energy solution that could power rural applications and emergency situations by harvesting wasted human biomechanical energy.
A high step up converter with voltage
This document presents a novel isolated high step-up converter using an adjustable voltage-multiplier module for sustainable energy applications. The voltage-multiplier modules are composed of coupled inductors and switched capacitors to achieve a high step-up gain without a large duty ratio or turns ratio. Due to passive lossless clamped performance, leakage energy is recycled to reduce voltage spikes and improve efficiency while allowing use of lower voltage switches. The isolated topology satisfies safety regulations and provides continuous smooth input current to decrease losses and electromagnetic interference.
Piezoelectric Energy Harvester - Capstone Design
•The complete design of a real size piezoelectric system, enabling to harvest from roads and generate, store, and supply electricity to light up street lights.
•Sizing and construction of a scaled down prototype of the real size piezoelectric energy harvesting system, Storage of electrical energy outputted from system, supplying power to the load and smart system, Power monitoring system to monitor energy stored, supplied, and outputted.
•Complete PCB Design and circuit board building in accordance with Arduino UNO Rev-3 on EagleCAD as well as LCD to display readings.
•Prototype commissioning and performance testing of entire system comprised of 3 main subsystems: Generation, Power Storage, and Power Monitoring System
FOOT STEP POWER GENERATION
In this project we are generating electrical energy by means of a non- conventional method just by walking on the footsteps. Non conventional system for energies are very much required at this time. Energy generation using footsteps requires no any fuel input to generate electricity. In this project we are generating electricity just with the help of rack and pinion arrangement along with alternator and chain drive mechanism.
For its proper functioning such that it converts Force into electrical energy, the mechanism consists of rack & pinion, chain drives, alternator and battery. We have discussed its various alternate applications with extension also. The power generation is much worthy but it has little initial cost effective factors.
Footstep power generating system
This document describes a footstep power generation system that converts the kinetic energy from human footsteps into usable electricity. The system uses an array of piezoelectric sensors that generate voltage when pressure is applied. The voltage is stored in a lead-acid battery and can be used to power small DC loads. A microcontroller and LCD display are used to indicate the voltage level being stored in the battery. The system was designed and implemented to harvest wasted energy from human locomotion and demonstrate piezoelectric energy harvesting.
final year embedded systems projects in chennai
We provide all types of projects like EEE projects, embedded projects, mechanical projects, labview projects, java project, robotic projects, vlsi projects,ECE projects, software and final year projects for diploma and engineering students in chennai and bangalore.
Must ppt
This document presents a project on developing a hybrid power plant using vertical-axis wind turbines and solar panels. The aim is to provide a renewable energy source for electricity in remote, off-grid areas. A prototype was designed and built that uses a VAWT to generate AC voltage which is rectified to DC to charge batteries. Solar panels also generate DC voltage. A switch assembly allows power from the VAWT and solar panels to combine or be used individually to power a DC motor. The system provides a reliable renewable energy source and energy storage for locations without access to the electric grid.
IRJET- Foot Step Power Generation
This document describes a system that generates electricity from the kinetic energy of human footsteps. The system uses a rack and pinion mechanism to convert the vertical motion of footsteps into rotational motion. Gears, chains, and sprockets transfer this rotational motion to power a dynamo, which generates electricity. The electricity is stored in a battery. The system aims to harvest energy from places with high foot traffic to generate useful power and reduce dependency on conventional energy sources. It provides a clean, renewable method of small-scale power generation using wasted kinetic energy from human movement.
Energy harvesting through footsteps
Presentation on a concept of "energy harvesting through footsteps" made as part of a project on alternate energy at Noorul Islam University
IRJET- Foot Step Power Generation
This document describes a design for generating electricity from human foot steps. The system uses a rack and pinion mechanism along with a sprocket and chain drive to convert the linear motion of footsteps into rotational motion. This rotational motion spins a DC generator to produce electricity. The electricity is stored in a battery. Key components of the system include a speed brake arrangement, rack and pinion gears, sprockets and chain drive, flywheel, DC generator, and battery. When installed in areas with heavy foot traffic, this design could generate significant amounts of renewable energy from an underutilized source.
Regenerative braking sytem
This document discusses regenerative braking systems. It begins by explaining conventional braking systems, noting that they waste up to 30% of a car's generated power as heat. It then describes how regenerative braking systems work, funneling the energy created during braking back into the battery. The key components are identified as the brake drum, friction lining, controller, electric generator, and linking mechanism. Diagrams are provided to illustrate how the energy is transferred back to the battery during braking. Advantages include reduced pollution and increased engine life by reducing energy waste, while disadvantages include added weight and costs. Regenerative braking has applications in electric vehicles and transportation systems to recover kinetic energy lost during deceleration.
Major project synopsis ON FOOT STEP POWER GENERATION
This document summarizes a student project that aims to generate electricity from footstep power. The project converts the kinetic energy from walking or running on an inclined stepping plate into electrical energy using a rack and pinion mechanism connected to a generator. The generated DC power is stored in a battery and then converted to AC power using an inverter. Potential applications include power generation in places with many footfalls like colleges, shopping complexes, and transportation hubs to provide a renewable source of electricity.
Solar doc
The document proposes a "Future House" that is fully electrified using a photovoltaic (solar) power system. It includes a floor plan of the house and discusses designing and installing the PV system. The PV system would provide all of the house's electricity through solar panels on the roof. It describes the typical components of a grid-interactive PV system without battery backup, including solar panels, mounting equipment, inverters, and meters. The document also discusses factors that affect the output of a PV system like sunlight availability and shading.
Solar wind hybrid power system ppt
The document summarizes the design and development of a solar-wind hybrid power system by two students at Edith Cowan University under the supervision of Dr. Laichang Zhang. It outlines the objectives to generate continuous power from both wind and solar sources. The design process is documented, including different design stages, testing results, specifications of the solar panel and wind turbine, challenges faced, lessons learned, and future work. The final system was able to generate 120W of power, though the original goal was 200W, due to losses. The project provides an efficient way to harness renewable energy sources.
What's hot (19)
Foot step power generation,free energy,electrical energy
Foot step power generation,free energy,electrical energy
Major project synopsis ON FOOT STEP POWER GENERATION
Major project synopsis ON FOOT STEP POWER GENERATION
Similar to Masoud abshar-battery-less-smoothing-of-solar-pv-generation
How to Deploy Energy Storage Technology at the Enterprise Level – Case Study
The financial justification for the roll out of battery based storage technology to large and medium sized companies is becoming increasingly compelling. Such systems will allow time shifting of demand enabling an enterprise to take advantage of low priced electricity as well as avoiding expensive electricity and surcharges during periods of high network usage. These benefits can be enjoyed by the enterprise without the need to resort to demand reduction which could impact on the operation of the business. This session focusses on the choices and options concerning the deployment of battery based storage systems and how this new technology can be cost effectively rolled out, at enterprise level, illustrated with some case studies of deployed systems.
Top 4 solar batteries
The document summarizes and compares 4 top solar battery options:
1. LG Chem batteries which offer industry-leading power and efficiency as well as a compact and lightweight design for easy installation.
2. BYD batteries which have over 300MWh of batteries in service and offer over 6,000 cycles of battery life.
3. Solax batteries which are produced in partnership with LG Chem and offer a 6000 cycle lifespan with a 10 year warranty and 95% depth of discharge.
4. Tesla Powerwall 2 which provides solar self-consumption, time of use load shifting, backup power and is safe, maintenance-free with a sleek design.
Battery Storage Can Work in Every Level from Large to Small Companies to SMEs
Batteries could be set to revolutionise the way we use the grid. The commercial sector only represents around 30% of electricity used. Is the secret to balancing the grid in the domestic sector?
APsystems Value Proposition
This document provides an overview of APsystems, a leading microinverters supplier. It discusses the company's history of innovations in solar microinverter technology protected by 44 patents. APsystems has over 20,000 installations monitored worldwide reaching over 250 MWp in 2015. The company is ISO 9001 certified and offers up to 20 year warranties on its microinverters and monitoring systems.
Rebecca mills-securing-the-n ts-energy-future
Territory Generation is transitioning to renewable energy sources to power Alice Springs. By 2030, the majority of its base load supply will come from renewables. Upgrades include a 41 MW gas plant expansion, 7.5 MW upgrade to another plant, and a 5 MW/4.6 MWh battery energy storage system. The battery will provide frequency response, reduce gas plant ramping due to solar intermittency, and defer transmission upgrades. The projects improve efficiency, enable higher solar penetration and transition Alice Springs to more sustainable energy sources.
AlphaESS company presentation
This document provides an overview of AlphaESS, an energy storage solutions company. It discusses AlphaESS' company profile including its 8-year history, global presence in over 50 countries, key milestones, solutions, and certifications. It then describes AlphaESS' residential products ranging from 3-10kW and commercial/industrial solutions from 30kW-10MW+. Finally, it discusses AlphaESS' focus on solutions reliability including their selection of safe LFP battery cells, comprehensive battery management systems, intelligent energy management systems, and cloud monitoring platform. In summary, AlphaESS provides a full suite of smart energy storage solutions and services for residential, commercial, and utility-scale applications.
Energy Storage solutions
Smooth the intermittency of renewable energies, stabilize the transmission and distribution systems, or optimize your energy production by integrating an energy storage system into your commercial or PV power power installation.
Whatever the application, wherever on the globe, Schneider Electric is there to support your energy storage needs.
ASEAN Centre of Energy Workshop - BESS in ASEAN - Wartsila_May2022
May 2022
ACE Workshop on Energy Storage
Development in ASEAN
Presentation 2:
Deploying Storage for Power
Systems in Developing Countries:
Energy Storage Projects in SEA, by Loic Charmoille (Wartsila)
Rec brochure rec_solarbox_en_web_20141112
The document summarizes REC's SolarBox product, a portable hybrid solar power station. It consists of solar panels, batteries, and an optional diesel generator contained in a standard shipping container. It provides off-grid power for applications such as rural electrification projects, disaster relief, and commercial/industrial use. A case study describes an installation on Bantayan Island in the Philippines providing power to the local community and satellite communications. REC is a leading global solar energy solutions provider with over 15 years of experience and 1,600 employees worldwide.
References-Book-LQ-3
This document discusses an energy storage company that provides grid support and renewable energy solutions. It aims to enable renewable energies through battery and hydrogen technologies. It has installed over 20 MW of capacity across 21 countries. It focuses on grid support, distributed storage, and off-grid power generation using various battery technologies.
Microsun Corporate Presentation 2019
This document is a corporate presentation for MicroSun Solar, a leading manufacturer of solar photovoltaic modules in India. It summarizes that MicroSun has been in business since 2007, has a 150MW annual module manufacturing facility, over 200 dealers and distributors, and 50,000+ satisfied customers. It promotes MicroSun's vision of accelerating solar adoption to provide sustainable energy and lists their product lines which include solar modules, water pumping systems, and rooftop projects.
Solar PV Renewable Energy Solutions for India
SunCarrier Omega, India, offers SunCarrier - the sun-tracking solar PV systems, and Cellcube FB10/100 - the vanadium redox flow battery as turnkey implemented and commissioned offerings to fulfill your sustainable energy initiatives.
Clean Energy Sector
The document discusses several alternative energy companies and technologies represented by Nebula Group USA, including Scotia, which offers an improved solar-powered street lighting system; Rayviance, which produces efficient solar water heaters; Smart Array 3000, which connects solar panels to existing infrastructure to provide clean energy to the grid; and a hydrogen fuel cell technology company providing emission-free energy for vehicles and backup power systems. Nebula Group USA represents these companies and their green technologies internationally.
Sunwoda Energy Group Presentation 2023-Jen version.pdf
EN-Sunwoda Energy Solution Co.,Ltd-Presentation.pdf
#𝙎𝙪𝙣𝙬𝙤𝙙𝙖 𝙀𝙣𝙚𝙧𝙜𝙮 𝙏𝙚𝙘𝙝𝙣𝙤𝙡𝙤𝙜𝙮 𝘾𝙤., 𝙇𝙩𝙙（Stock code [300207] ), Asia Battery Giant with 26+ years history, List in China & Swiss Stock market. Global Top 10 lithium-ion battery and world-class manufacturer , 12 production bases with 300GWh capacity, 50,000+ global staffs, 1000+ projects worldwide, ranked 32 in Global new energy enterprises.
#𝙒𝙝𝙖𝙩 𝙬𝙚 𝙨𝙪𝙥𝙥𝙡𝙮: Battery cells, Pack, Portable, Residential, C&I , Utility energy storage products & solutions.
# 𝘼𝙥𝙥𝙡𝙞𝙘𝙖𝙩𝙞𝙤𝙣 𝙎𝙘𝙚𝙣𝙖𝙧𝙞𝙤𝙨: Suits for Generation, Distribution, Behind meter 20+ applications
# 𝘽𝙪𝙨𝙞𝙣𝙚𝙨𝙨 𝙘𝙤𝙣𝙩𝙖𝙘𝙩 & 𝙁𝙧𝙚𝙚 𝙞𝙣𝙦𝙪𝙞𝙧𝙚𝙨: jenniferzhong@sunwoda.com
AlphaESS company presentation 2020
AlphaES stablished in 2012, AlphaESS specializes in advanced battery storage products and intelligent energy management solutions for residential and commercial customers. AlphaESS products have spread to more than 50 countries through our partners, benefitting thousands of customers.
Lavancha renewable energy presentation solar and wind hybrid power plant
With state-of-the-art hybrid technology that comes in the form of SolarMill that efficiently utilizes the potential of wind and sun energy in any climatic conditions, minimizing your carbon footprint becomes to breeze
Solar Power Solutions for Africa
CareyGlass Solar is Ireland's largest solar energy company, with over 45 years of experience in construction and 20 years in solar photovoltaics. They offer turnkey solar power solutions for Africa, including solar street lights, borehole pumps, power systems for telecom towers, and mobile or fixed solar power units that provide electricity for community needs.
Energy Storage: New Capabilities for the Electric Grid – The Tehachapi Energy...
The Tehachapi Energy Storage Project (TSP) is a 32 megawatt-hour battery energy storage system located in California that was jointly funded by Southern California Edison and the US Department of Energy. The project tested the battery storage system for 13 grid support applications. Initial testing showed the system could discharge 32 megawatt-hours over 4 hours as required and had an average round-trip efficiency of 90.6% during continuous cycling. However, the project faced challenges including replacing power conversion system transformers after one failed due to an unmet design requirement.
Solar thermal energy. Parabolic trough collectors
Abengoa counts on its own solar thermal
technology and is a world leader in the construction
of this type of plant, with 1.7 GW of installed
capacity representing 34 % of the worldwide
production of solar thermal energy.
Go Solar Solutions
This document discusses Go Solar Solutions, which provides engineering, procurement, and construction (EPC) services for solar power projects. It summarizes Go Solar's services for utility-scale and rooftop solar installations, including site evaluation, design, equipment installation, and long-term operation and maintenance. Examples are given of completed solar farm projects in India ranging from 112 kW to 50 MW in size.
Similar to Masoud abshar-battery-less-smoothing-of-solar-pv-generation (20)
How to Deploy Energy Storage Technology at the Enterprise Level – Case Study
How to Deploy Energy Storage Technology at the Enterprise Level – Case Study
Battery Storage Can Work in Every Level from Large to Small Companies to SMEs
Battery Storage Can Work in Every Level from Large to Small Companies to SMEs
ASEAN Centre of Energy Workshop - BESS in ASEAN - Wartsila_May2022
ASEAN Centre of Energy Workshop - BESS in ASEAN - Wartsila_May2022
Sunwoda Energy Group Presentation 2023-Jen version.pdf
Sunwoda Energy Group Presentation 2023-Jen version.pdf
Lavancha renewable energy presentation solar and wind hybrid power plant
Lavancha renewable energy presentation solar and wind hybrid power plant
Energy Storage: New Capabilities for the Electric Grid – The Tehachapi Energy...
Energy Storage: New Capabilities for the Electric Grid – The Tehachapi Energy...
More from james hamilton
Low Load Diesel All Energy 2017
Low Load Diesel case study presented during the microgrid session of All Energy, Melbourne, Oct 11 2017
Rick rocheleau-hawaii-clean-energy-initiative
Hawaii has an ambitious goal of reaching 100% renewable energy by 2045 to reduce its dependence on imported fossil fuels. The Hawaii Natural Energy Institute is demonstrating battery storage projects to help integrate higher levels of renewable energy like solar and wind onto the state's island grids. A 1 MW lithium-ion battery on Hawaii Island has helped reduce grid frequency variability from a nearby 10 MW wind farm and provided over 3.3 GWh of storage capacity after over 5 years of operation.
Murrray sheerin-renewable-energy-storage-best-practice-at-tpl-and-issues-faced
Tonga Power Limited generates electricity for over 22,000 customers across four island groups in Tonga. Currently, 84% of electricity is generated through diesel and 16% through renewable energy such as solar. Tonga aims to generate 50% of its electricity from renewable sources by 2020 to reduce dependence on imported diesel. Tonga Power has implemented several solar power plants totaling 4.9 MW currently but needs additional 11.1 MW of renewable capacity to meet its 50% target. Integrating high levels of solar power presents challenges in maintaining grid stability without sufficient battery storage.
Chem nayar-synthetic-storage-using-variable-speed-diesel-generators-
This document summarizes a presentation about using variable speed diesel generators for synthetic storage. It discusses how variable speed generators can operate more efficiently than constant speed generators by matching generator output to fluctuating load demands. The presentation includes case studies of hybrid solar-diesel-battery microgrid projects in Malaysia, India, and Western Australia's Eco Resort that demonstrate fuel savings from variable speed control. It also shows typical load profiles and how battery storage can help maximize generator efficiency.
Mark waite-the-role-of-renewable-energy-in-chuuk-state-service-expansion
Chuuk State in the Federated States of Micronesia has a population of over 35,000 people spread across 40 municipalities. Currently only 26% have access to electricity, with most power coming from diesel generators. The goal is to expand access to 95% by 2020 using renewable energy. Solar is the best option due to good sun resources. Plans include expanding the main grid, developing mini-grids with solar-diesel-battery hybrids, and providing solar home systems. Challenges include land ownership issues, high costs estimated at $65 million, and maintaining widely dispersed systems. Various models are being considered depending on community size and layout.
Vinod tiwari-blockchain-for-microgrid-transactions
The document discusses Power Ledger, a blockchain-enabled peer-to-peer energy trading platform. It describes how Power Ledger works, allowing consumers to trade electricity locally through a distributed ledger in a secure and transparent way. This helps encourage renewable energy adoption, reduces costs for consumers, and preserves the value of existing grid infrastructure. The blockchain ensures fast, low-cost settlements of transactions without a centralized authority. Microgrids and virtual power plants are also discussed as applications of this local energy trading.
Teiiti marita-renewable-energy-progress-in-the-cook-islands
- The Cook Islands consist of 15 scattered islands with a total land area of 240 square km and population of 11,000. It relies heavily on tourism with 150,000 annual visitors.
- Te Aponga Uira (TAU) is the government-owned power utility responsible for electricity generation, distribution and retailing on the main island of Rarotonga which supplies 80% of the country's power needs.
- The national goals are to transform the electricity sector to rely 50% on renewable energy by 2015 and 100% by 2020. So far six northern islands have achieved 100% renewable energy and four southern islands will transition by March 2018, bringing the total to 84% of islands on 100% renewable energy
Sam latz-se tu-p-solar-energy-transformation-program-setup
The document summarizes the status and learnings from the Solar Energy Transformation Program - SETuP, which aims to install solar PV and energy storage systems in over 50 remote Indigenous communities currently reliant on diesel power. It provides details on the program scope, current status of installations, key learnings regarding land access, community engagement, construction costs, and actual diesel savings observed. Performance data from the first tranche of installations is also presented. The document concludes by providing contacts for those seeking more information.
Rebecca carter-rottnest-island-nexus-project
The document summarizes the Water Renewable Energy Nexus (WREN) project on Rottnest Island, Western Australia. The key points are:
1) WREN integrated a 600kW solar PV array, desalination plant energy storage, and control system upgrades to increase renewable energy contribution on Rottnest Island to 45% while maintaining reliable power.
2) The project was funded by the Australian Renewable Energy Agency and involved collaboration between ARENA, the Rottnest Island Authority, and Hydro Tasmania.
3) Initial results showed the system able to provide 95% instantaneous renewable energy and significant savings by better utilizing renewable energy during periods of high generation.
Mike chapman-evolution-of-the-rural-network-stand-alone-power-system-pilot
The document discusses stand-alone power systems (SPS) that Western Power has installed in remote areas as an alternative to extending the electricity grid. Six initial SPS units were installed in 2016 to electrify areas at the edge of the grid. The SPS units generate power using solar panels, batteries, and backup diesel generators. The document describes two case studies where customer usage exceeded the capacity of the SPS units, resulting in outages, and lessons learned about conducting more robust energy audits and clear communications with customers. It concludes that Western Power sees potential to deploy over 3,000 additional SPS systems as the technology replaces aging rural infrastructure.
Kirsty gowans-arena
Kirsty Gowans from the Australian Renewable Energy Agency discussed ARENA's Regional Australia's Renewables initiative and lessons learned from projects. The RAR program from 2013-2015 provided grant funding for off-grid and remote renewable energy projects aimed at displacing diesel. However, most projects experienced delays of 10-12 months on average. Lessons included underestimating costs for remote projects and difficulties with stakeholder engagement. Data monitoring was also undervalued but important for evaluating performance and costs. ARENA resources are available to share knowledge from the portfolio of off-grid renewable projects.
Evan franklin-dane-merkel-consort-the-bruny-island-battery-trial
The CONSORT project is testing a Network-Aware Coordination (NAC) approach to optimize the coordination of batteries on Bruny Island, Tasmania to support the local distribution network. NAC aims to schedule batteries to prevent network constraint violations while respecting consumer preferences and privacy. Early simulations show NAC can reduce diesel generator use by 83% and starts by 67% compared to operating batteries without coordination. The project is also examining fair reward mechanisms for consumer participation and studying consumer responses to the technology and incentives. Live trials are beginning to test NAC's ability to support the network in real-world peak demand periods.
Chris dowe-synergy’s-renewable-energy-integration
Synergy is Western Australia's largest electricity provider, supplying over 1 million customers. It has evolved from a state government monopoly in 1975 to increasing competition today. Synergy has a history of developing and operating renewable energy generation such as wind and solar farms. It has integrated renewable energy into remote wind-diesel power systems for over 30 years to reduce costs and emissions. The replacement of the aging control system at the Bremer Bay wind-diesel site with a new Comap system allows higher wind penetration, remote monitoring and automation to improve reliability. There is potential to develop Bremer Bay further as a permanent microgrid utilizing battery storage and additional local renewable generation.
Jeremy kasper-energy-research-in-alaska
The document summarizes energy research at the University of Alaska Fairbanks' Alaska Center for Energy and Power (ACEP). ACEP's mission is to develop cost-effective energy solutions for Alaska through applied research, technology testing, energy analysis, training, and commercializing innovation. Key areas of research include solar, hydrokinetic, and battery technologies as well as power systems integration. ACEP also disseminates information and provides training programs like the Arctic Remote Energy Networks Academy. One project discussed is the proposed Yakutat Wave Energy Project which would use wave energy to power the remote city of Yakutat currently reliant on diesel.
Flinders Island Isolated Power System (IPS) Connect 2016 T MAHMOUD Western Power
The energy industry is rapidly evolving to take advantage of renewable resources and Western Power is embracing new technologies that will improve service and reliability to our customers. New and improving technologies such as solar, wind, wave and most importantly batteries are changing the way we think about the delivery and storage of electricity. One of these developments is the microgrid, which is essentially a small scale power grid that can operate independently (in ‘island mode’) or connect with the main electrical grid – think of a small suburb, or estate, that shares electricity and the cost of the infrastructure. A microgrid needs to control the flow of electricity of low or medium voltage, but does not need connection to a centralised generation or transmission network. Western Power has trialled the world’s first microgrid project that combines wave energy, solar (photovoltaic) energy, a desalination plant, and energy storage that connects to our large electricity network.
Thair demonstrates extensive engineering experience focused on power systems planning and real-time operation. This includes experience in load, generation and microgrids grid connection, renewable energies, transmission networks planning and stability. This experience is supported by his academic research at the University of Tasmania and Edith Cowan University, including invitation to review international journals and conferences in the field of Energy Systems and Artificial Intelligence. Thair has previously held roles with Canegie Wave Energy and Deng Kai.
Flinders Island Isolated Power System (IPS) Connect 2016 T BUTLER CEC
The Clean Energy Council is the peak body for the clean energy industry in Australia.The CEC represent and work with hundreds of leading businesses operating in solar, wind, energy efficiency, hydro, bioenergy, energy storage, geothermal and marine along with more than 4000 solar installers.
The CEC is committed to accelerating the transformation of Australia’s energy system to one that is smarter and cleaner.
Tom is passionate about renewable energy, with a career spent heavily involved in addressing grid interconnection challenges and negotiating technical outcomes on behalf of project developers and researchers.
Across his 5 years with the CEC, Tom has supervised policy outcomes on behalf of Australia’s renewable energy industry. In seeking to contribute across the transformation of Australia’s electricity supply system
Tom has perviously held positions with companies such as Senergy Econnect and Team Electrical.
Flinders Island Isolated Power System (IPS) Connect 2016 T EDIS GREEN ENERGY...
Tristan Edis has 13 years’ experience analysing energy and climate change policy issues and the associated markets, industries and technologies. He is one of Australia’s most prominent expert commentators on the renewable energy industry and climate change mitigation policy.
His experience most recently was as the editor of Australia’s leading daily news and analysis website on the business and politics of climate change – Climate Spectator. This publication acted as the key reference source on market, policy and industry issues affecting the renewable energy sector in Australia.
In addition Tristan Edis has also been involved in leading research on carbon abatement certificate markets and renewable energy through his time working at the Grattan Institute, Ernst & Young’s project finance advisory division, the Clean Energy Council and the Australian Government’s Greenhouse Office (which then became the Department of Climate Change).
Flinders Island Isolated Power System (IPS) Connect 2016 S KILMETE PUC
The Federated States of Micronesia (FSM) is a grouping of 607 small islands in the Western Pacific about 2,500 miles southwest of Hawaii, lying just above the Equator. Generally speaking, FSM comprises what is known as the Eastern and Western Caroline Islands. While the country's total land area amounts to only 270.8 square miles, it occupies more than one million square miles of the Pacific ocean, and ranges 1,700 miles from East (Kosrae) to West (Yap)- Each of the four States centers around one or more "high islands." and all but Kosrae include numerous atolls.
Chuuk State has a total land area of 492 square miles and includes seven major island groups. Pohnpei State has 133.4 square miles of land area, of which 130 is accounted for by Pohnpei island, the largest in FSM. Yap State is made up of 4 large islands, 7 small islands and 134 atolls, with a total land area of 45.6 square miles- Kosrae is essentially one high island of 42.3 square miles.
FSM enjoys a tropical climate, with relatively even, warm temperatures throughout the year. Rainfall is generally plentiful, and Pohnpei reputedly is one of the wettest places on Earth, with up to 330 inches of rain per year.
Flinders Island Isolated Power System (IPS) Connect 2016 S TROMAN ITP
The ARENA-funded Lithium Ion Battery Test Centre compares various lithium-ion battery chemistries and products available in the Australian market against claims made by manufacturers.The lithium-ion battery test centre conducts accelerated testing of batteries for “typical” Australian conditions.
ITP will cycle the batteries up to three times a day for three years to simulate nine years worth of “normal” daily cycling of the batteries. ITP will monitor the capacity of the batteries tested over this period to assess their performance.
Flinders Island Isolated Power System (IPS) Connect 2016 R ROCHELEAU HNEI
Although the Hawaiian Islands are blessed with an abundance of renewable energy sources including excellent solar and wind resources, and have the nation’s most aggressive renewable energy standards, the state still rely heavily on fossil fuels for electricity generation. With isolated (unconnected) island grids and sparse systems on some islands, integration of the intermittent renewable generation systems has been challenging. The Hawaii Natural Energy Institute (HNEI) at the University of Hawaii has initiated an integrated effort involving modeling, testing, and demonstration to identify and validate pathways to higher renewable integration. In this talk, I will discuss the analysis being used to identify strategic paths forward and will describe several projects currently underway including the Maui Smart Grid Demonstration Project, the Smart Grid Inverter Project and several grid-scale battery energy storage projects.
Richard Rocheleau (PhD, Chemical Engineering, University of DE), has over 35 years of experience in renewable energy, with an emphasis in the areas of photovoltaics, hydrogen fuel cells, and energy systems. Dr. Rocheleau joined the faculty of the Hawaii Natural Energy Institute at the University of Hawaii in 1988 and was appointed Director in 2000. Under his direction, the Institute is leading the development of public‐private partnerships focused on the development, testing and integration of alternative energy technologies into the electrical grid. HNEI has major funding from the US Department of Energy and the Office of Naval Research. Dr. Rocheleau was also successful in positioning the Institute to receive a portion of the ‘barrel tax’, established by the Hawaii State Legislature supporting studies for integration of renewable energy technologies into the grid intended to assist the state to meet its aggressive renewable energy portfolio goals.
More from james hamilton (20)
Murrray sheerin-renewable-energy-storage-best-practice-at-tpl-and-issues-faced
Murrray sheerin-renewable-energy-storage-best-practice-at-tpl-and-issues-faced
Chem nayar-synthetic-storage-using-variable-speed-diesel-generators-
Chem nayar-synthetic-storage-using-variable-speed-diesel-generators-
Mark waite-the-role-of-renewable-energy-in-chuuk-state-service-expansion
Mark waite-the-role-of-renewable-energy-in-chuuk-state-service-expansion
Vinod tiwari-blockchain-for-microgrid-transactions
Vinod tiwari-blockchain-for-microgrid-transactions
Teiiti marita-renewable-energy-progress-in-the-cook-islands
Teiiti marita-renewable-energy-progress-in-the-cook-islands
Sam latz-se tu-p-solar-energy-transformation-program-setup
Sam latz-se tu-p-solar-energy-transformation-program-setup
Mike chapman-evolution-of-the-rural-network-stand-alone-power-system-pilot
Mike chapman-evolution-of-the-rural-network-stand-alone-power-system-pilot
Evan franklin-dane-merkel-consort-the-bruny-island-battery-trial
Evan franklin-dane-merkel-consort-the-bruny-island-battery-trial
Flinders Island Isolated Power System (IPS) Connect 2016 T MAHMOUD Western Power
Flinders Island Isolated Power System (IPS) Connect 2016 T MAHMOUD Western Power
Flinders Island Isolated Power System (IPS) Connect 2016 T BUTLER CEC
Flinders Island Isolated Power System (IPS) Connect 2016 T BUTLER CEC
Flinders Island Isolated Power System (IPS) Connect 2016 T EDIS GREEN ENERGY...
Flinders Island Isolated Power System (IPS) Connect 2016 T EDIS GREEN ENERGY...
Flinders Island Isolated Power System (IPS) Connect 2016 S KILMETE PUC
Flinders Island Isolated Power System (IPS) Connect 2016 S KILMETE PUC
Flinders Island Isolated Power System (IPS) Connect 2016 S TROMAN ITP
Flinders Island Isolated Power System (IPS) Connect 2016 S TROMAN ITP
Flinders Island Isolated Power System (IPS) Connect 2016 R ROCHELEAU HNEI
Flinders Island Isolated Power System (IPS) Connect 2016 R ROCHELEAU HNEI
Recently uploaded
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
The Python for beginners. This is an advance computer language.
Python language is very important language at this time. we can easily understand this language by these notes.
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Casting-Defect-inSlab continuous casting.pdf
Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting
A review on techniques and modelling methodologies used for checking electrom...
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
Time Division Multiplexing (TDM) is a method of transmitting multiple signals over a single communication channel by dividing the signal into many segments, each having a very short duration of time. These time slots are then allocated to different data streams, allowing multiple signals to share the same transmission medium efficiently. TDM is widely used in telecommunications and data communication systems.
### How TDM Works
1. **Time Slots Allocation**: The core principle of TDM is to assign distinct time slots to each signal. During each time slot, the respective signal is transmitted, and then the process repeats cyclically. For example, if there are four signals to be transmitted, the TDM cycle will divide time into four slots, each assigned to one signal.
2. **Synchronization**: Synchronization is crucial in TDM systems to ensure that the signals are correctly aligned with their respective time slots. Both the transmitter and receiver must be synchronized to avoid any overlap or loss of data. This synchronization is typically maintained by a clock signal that ensures time slots are accurately aligned.
3. **Frame Structure**: TDM data is organized into frames, where each frame consists of a set of time slots. Each frame is repeated at regular intervals, ensuring continuous transmission of data streams. The frame structure helps in managing the data streams and maintaining the synchronization between the transmitter and receiver.
4. **Multiplexer and Demultiplexer**: At the transmitting end, a multiplexer combines multiple input signals into a single composite signal by assigning each signal to a specific time slot. At the receiving end, a demultiplexer separates the composite signal back into individual signals based on their respective time slots.
### Types of TDM
1. **Synchronous TDM**: In synchronous TDM, time slots are pre-assigned to each signal, regardless of whether the signal has data to transmit or not. This can lead to inefficiencies if some time slots remain empty due to the absence of data.
2. **Asynchronous TDM (or Statistical TDM)**: Asynchronous TDM addresses the inefficiencies of synchronous TDM by allocating time slots dynamically based on the presence of data. Time slots are assigned only when there is data to transmit, which optimizes the use of the communication channel.
### Applications of TDM
- **Telecommunications**: TDM is extensively used in telecommunication systems, such as in T1 and E1 lines, where multiple telephone calls are transmitted over a single line by assigning each call to a specific time slot.
- **Digital Audio and Video Broadcasting**: TDM is used in broadcasting systems to transmit multiple audio or video streams over a single channel, ensuring efficient use of bandwidth.
- **Computer Networks**: TDM is used in network protocols and systems to manage the transmission of data from multiple sources over a single network medium.
### Advantages of TDM
- **Efficient Use of Bandwidth**: TDM all
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, SerbiaIEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
官方认证美国密歇根州立大学毕业证学位证书原版一模一样
原版一模一样【微信：741003700 】【美国密歇根州立大学毕业证学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
ACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
Literature Review Basics and Understanding Reference Management.pptx
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
New techniques for characterising damage in rock slopes.pdf
rock mass characterization and New techniques for characterising damage in rock slopes
Recently uploaded (20)
The Python for beginners. This is an advance computer language.
The Python for beginners. This is an advance computer language.
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
Literature Review Basics and Understanding Reference Management.pptx
Literature Review Basics and Understanding Reference Management.pptx
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
New techniques for characterising damage in rock slopes.pdf
New techniques for characterising damage in rock slopes.pdf
Masoud abshar-battery-less-smoothing-of-solar-pv-generation
- 1. Battery-less Smoothing of Solar PV Generation Masoud Abshar Managing Director Magellan Power
- 2. Magellan Difference • R&D and manufacturing in Australia • In operation for 26 years • Australian Technology leader in Energy Storage Systems • Extensive electrical and mechanical design capabilities • Since 1991 thousands of systems supplied to major Australian and international projects • 24/7 service department with all spares kept in stock • In-house remote monitoring capabilities • AS/NZS ISO 9001:2008 – QUALITY SYSTEM
- 3. Magellan Products Series IIIB MCRII Emergency DC UPS Industrial UPS Commercial UPS Solar Smoother Utility Scale Energy Storage Solar Gate Sky Eye Commercial Energy Storage Emergency Charger HESS Stand Alone Power
- 4. Magellan Utility Scale ESU 100kVA – 1MVA & 500kWh – 4MWh
- 5. Onslow Power Project WA’s Largest Solar + Storage Microgrid Project. Onslow powered by 50% Renewable Energy by 2018.
- 6. Onslow Power Project Magellan’s 1MW/500kWh Battery Storage
- 7. Stand Alone Power (SPS) PV Panels Magellan Inverter Lithium Batteries Diesel Generator
- 8. Home Energy Storage System (HESS)
- 9. HESS – 5kW Australian made All in one inverter & energy storage Bi-directional design 6.4kWh – 13kWh high efficiency long life batteries Simple installation Monitoring app for mobile
- 10. Solar Water Pump (Africa) For remote water wells in West Africa
- 11. Solar Smoother
- 12. Need for Generation Management Generation with Intermittent Variations Solar Inverter Electrical Grid PV Array
- 14. Proactive Solar Smoothing System Battery
- 16. Sky Eye and Smoothing Operation -10000 0 10000 20000 30000 40000 50000 60000 70000 80000 Power[W] Time Scaled Irradiance Plant ExportWithout Smoothing With Smoothing
- 17. Further Developments Stereo Visioning Cloud Classification