The document discusses DSN decontactors, which are compact plugs and sockets with automatic IP66/IP67 sealing for dust-tight and water-tight protection. They provide load-break capability according to standards and come in sizes from 20A to 63A. Key features include compact sizes, impact resistance, wide temperature range, and compliance with various international standards.
Marechal SPeX Single Pole Power Connector
Zone 1 & Zone 2 Zone 21, Zone 22
680 Amp IP65/IP66 Water & Dust-tight
Marechal Hazardous Area Plugs & Sockets
1000V a.c. / 1500V d.c. single pole, 6800A ‘e' increased safety Marechal SPeX plug and socket power connector enables the user to connect and disconnect heavy duty equipment simply and safely in hazardous area zones 1, 2, 21 and 22.
Designed for use in hazardous areas the Marechal SPeX plug and socket assembly is ATEX 94/9/CE approved for zones 1 & 2 (gas) and zones 21 & 22 (dust). Marechal SPeX offers automatic IP66/IP67 ingress protection rating as soon as the plug is inserted into the socket. Electromechanical interlocking is provided via a microswitch (which opens and closes all phases simultaneously) to protect the user and to prevent electrical destabilisation of equipment.
The Marechal casing is manufactured in glassfibre-reinforced polyester which affords excellent mechanical protection (IK08) and resistance to UV and chemical agents. Typical applications include mobile gensets, ship-to-shore supplies, mines, offshore platforms etc.
The incorrect mating of phases is mechanically impossible. Furthermore colour-coding enables a visual check.
Marechal SPeX Single Pole Power Connector
Marechal SPeX - EX ATEX Hazardous Area Plug, Socket Power Connector
Enhanced protection mode « e »
Compliant with ATEX 94/9/CE Directive
Zones 1 and 2 (gas) and zones 21 and 22 (dust)
Up to 680 A
Up to 1000 V a.c.
Interlock switch system via pilot contacts, synchronized connection and disconnection for all phasesMechanical keying system with 5 positions to discriminate between phases
Visual identification of phases with standard colour codes
Automatically IP65 dust and watertight
IK08 shock resistant GRP casings
Resistant to temperature changes: -40 °C to +60 °C
Marechal DS range of industrial power supply and motor connection plugs and sockets provide low voltage distribution, 30amps-250amps. Marechal DS range industrial plugs are the quality standard for manufacturing industry providing the following benefits compliant with International Standard IEC60309-1 and European Standard EN60309-1 (Plugs & Sockets Outlets for Industrial Purposes).
Marechal DS Power Supply and Motor Connection Plugs and Sockets
30amp-250amp current ratings for plugs and sockets
500v-1000v a.c. rated plugs and sockets
IP54/IP55 water and dust tight plug assemblies (IP66/IP67 available)
AC-22 / AC-23 load breaking capability
GRP casings, chemical and IK08 shock resistant
Metal casings, corrosion resistant, IK09 shock resistant
Resistant to temperature changes -40 to +60 Degrees Celsius
Equipped with silver-nickel butt contacts for lifetime reliability
Typical Marechal DS Industrial Plugs Applications - power supply to motor and pump connections, heavy industry, mines and quarries, ship to shore plug connections, gensets, power supply to production lines and manufacturing operations. Marechal DS plugs and sockets range of decontactors is supported by a full line of wall mounting sockets, inclined sockets, coupler sockets, wall mounting appliance inlets and inclined appliance inlets.
Marechal DS Plugs & Sockets Decontactors - The Range
Marechal DS1 Plugs - 30amp
Marechal DS3 Plugs - 50am
Marechal DS6 Plugs - 90amp
Marechal DS9 Plugs - 150amp
Marechal DS2 Plugs - 250amp
Marechal Electric pioneered the use of high performance, silver-nickel butt contacts in electrical plug and socket systems (decontactors), which are now available for applications from simple compact multi-pin to heavy duty 600A plug connections. Marechal technology is used across a range of demanding environments such as the food and drink, nuclear power, heavy industry, infrastructure and ATEX hazardous area sectors. Marechal decontactors are an effective alternative to both hard-wired equipment and pin/sleeve type contacts, the decontactor is a highly flexible method of connecting and disconnecting electrical equipment at the press of a latch – safely. Marechal Electric brought the decontactor, the high performance industrial plug connector with integral AC21 switch, to the electrical market.
Marechal DSN range of industrial power supply and motor connection plugs and sockets provide low voltage distribution, 20amps-63amps. Marechal DSN range industrial plugs are the quality standard for manufacturing industry providing the following benefits compliant with International Standard IEC60309-1 and European Standard EN60309-1 (Plugs & Sockets Outlets for Industrial Purposes) :
*20amp-63amp current ratings for plug and socket assemblies
*500v-1000v a.c.
*IP66/IP67 water and dust tight plug assemblies
*AC-22 / AC-23 load breaking capability
*GRP casings, chemical and IK08 shock resistant
*Plugs resistant to temperature changes -40 to +60 Degrees Celsius
*Equipped with silver-nickel butt contacts for lifetime reliability
Typical Marechal DSN Industrial Plugs Applications - power supply to motor and pump connections, food and drinks industry, heavy industry, water utilities and treatment, mines and quarries, ship to shore plug connections, gensets, power supply to production lines and manufacturing operations. Marechal DSN plugs and sockets range of decontactors is supported by a full line of wall mounting sockets, inclined sockets, coupler sockets, wall mounting appliance inlets and inclined appliance inlets.
Marechal DSN range of industrial power supply and motor connection plugs and sockets provide low voltage distribution, 20amps-63amps. Marechal DSN range industrial plugs are the quality standard for manufacturing industry providing the following benefits compliant with International Standard IEC60309-1 and European Standard EN60309-1 (Plugs & Sockets Outlets for Industrial Purposes) :
*20amp-63amp current ratings
*500v-1000v a.c.
*IP66/IP67 water and dust tight plug assemblies
*AC-22 / AC-23 load breaking capability
*GRP casings, chemical and IK08 shock resistant
*Resistant to temperature changes -40 to +60 Degrees Celsius
*Equipped with silver-nickel butt contacts for lifetime reliability
T&D UK also stock distribute the ATEX Certified range of Marechal Hazardous Area plugs and sockets (decontactors) for Zones 1, 2, 21 and 22 installation.
Marechal Plugs & Sockets : Press Release
Belgian vegetable preparation company, Legumex, uses around 100,000m3 of water annually for the cleaning and preparation of fresh vegetables - this amount of water and 24/7 operation 365 days a year, means that their electrical plug and socket connections must be completely water-tight, robust and reliable. Legumex uses Marechal DSN1 Decontactor plugs and sockets on the permanent power supplies to the production line and in the maintenance workshop. Rated for currents of up to 20A, Marechal DSN1 Decontactors are sealed to IP66/67 making them completely watertight even for pressure-washing, when connected and disconnected. An integrated switch mechanism means that the maintenance team can immediately and safely disconnect or connect equipment without the need for a qualified electrician. This makes maintenance faster and significantly more cost-effective than the alternative of hard wired equipment. Marechal plugs and sockets are made from glass-reinforced polyester body, silver-nickel butt contacts and vibration-proof terminals - Marechal Decontactors are resistant to corrosion and shock, providing long-term reliability, even after thousands of connections and disconnections.
Marechal DB disconnectable motor switches combine the functions of switch-engine cut-off switch and plug and socket-outlet. The Marechal DB motor switches guarantee the safety of persons during an operation on the load (motor load or highly inductive).
Marechal DB Motor Switch Features:
Metal Casing resistant to mechanical shocks (IK09), and corrosion
Padlocking System
IP66 / IP67 cover
Silver-nickel buttcontacts:excellent current carrying performance.
Marechal DB Plug & Socket Motor Switch Range:
Marechal DB3 - 7.5kW
Marechal DB6 - 22kW
Marechal DB9 - 45Kw
Marechal Electric pioneered the use of high performance, silver-nickel butt contacts in electrical plug and socket systems (decontactors), which are now available for applications from simple compact multi-pin to heavy duty 600A plug connections. Marechal technology is used across a range of demanding environments such as the food and drink, nuclear power, heavy industry, infrastructure and ATEX hazardous area sectors. Marechal decontactors are an effective alternative to both hard-wired equipment and pin/sleeve type contacts, the decontactor is a highly flexible method of connecting and disconnecting electrical equipment at the press of a latch – safely. Marechal Electric brought the decontactor, the high performance industrial plug connector with integral AC21 switch, to the electrical market.
Marechal SPeX Single Pole Power Connector
Zone 1 & Zone 2 Zone 21, Zone 22
680 Amp IP65/IP66 Water & Dust-tight
Marechal Hazardous Area Plugs & Sockets
1000V a.c. / 1500V d.c. single pole, 6800A ‘e' increased safety Marechal SPeX plug and socket power connector enables the user to connect and disconnect heavy duty equipment simply and safely in hazardous area zones 1, 2, 21 and 22.
Designed for use in hazardous areas the Marechal SPeX plug and socket assembly is ATEX 94/9/CE approved for zones 1 & 2 (gas) and zones 21 & 22 (dust). Marechal SPeX offers automatic IP66/IP67 ingress protection rating as soon as the plug is inserted into the socket. Electromechanical interlocking is provided via a microswitch (which opens and closes all phases simultaneously) to protect the user and to prevent electrical destabilisation of equipment.
The Marechal casing is manufactured in glassfibre-reinforced polyester which affords excellent mechanical protection (IK08) and resistance to UV and chemical agents. Typical applications include mobile gensets, ship-to-shore supplies, mines, offshore platforms etc.
The incorrect mating of phases is mechanically impossible. Furthermore colour-coding enables a visual check.
Marechal SPeX Single Pole Power Connector
Marechal SPeX - EX ATEX Hazardous Area Plug, Socket Power Connector
Enhanced protection mode « e »
Compliant with ATEX 94/9/CE Directive
Zones 1 and 2 (gas) and zones 21 and 22 (dust)
Up to 680 A
Up to 1000 V a.c.
Interlock switch system via pilot contacts, synchronized connection and disconnection for all phasesMechanical keying system with 5 positions to discriminate between phases
Visual identification of phases with standard colour codes
Automatically IP65 dust and watertight
IK08 shock resistant GRP casings
Resistant to temperature changes: -40 °C to +60 °C
Marechal DS range of industrial power supply and motor connection plugs and sockets provide low voltage distribution, 30amps-250amps. Marechal DS range industrial plugs are the quality standard for manufacturing industry providing the following benefits compliant with International Standard IEC60309-1 and European Standard EN60309-1 (Plugs & Sockets Outlets for Industrial Purposes).
Marechal DS Power Supply and Motor Connection Plugs and Sockets
30amp-250amp current ratings for plugs and sockets
500v-1000v a.c. rated plugs and sockets
IP54/IP55 water and dust tight plug assemblies (IP66/IP67 available)
AC-22 / AC-23 load breaking capability
GRP casings, chemical and IK08 shock resistant
Metal casings, corrosion resistant, IK09 shock resistant
Resistant to temperature changes -40 to +60 Degrees Celsius
Equipped with silver-nickel butt contacts for lifetime reliability
Typical Marechal DS Industrial Plugs Applications - power supply to motor and pump connections, heavy industry, mines and quarries, ship to shore plug connections, gensets, power supply to production lines and manufacturing operations. Marechal DS plugs and sockets range of decontactors is supported by a full line of wall mounting sockets, inclined sockets, coupler sockets, wall mounting appliance inlets and inclined appliance inlets.
Marechal DS Plugs & Sockets Decontactors - The Range
Marechal DS1 Plugs - 30amp
Marechal DS3 Plugs - 50am
Marechal DS6 Plugs - 90amp
Marechal DS9 Plugs - 150amp
Marechal DS2 Plugs - 250amp
Marechal Electric pioneered the use of high performance, silver-nickel butt contacts in electrical plug and socket systems (decontactors), which are now available for applications from simple compact multi-pin to heavy duty 600A plug connections. Marechal technology is used across a range of demanding environments such as the food and drink, nuclear power, heavy industry, infrastructure and ATEX hazardous area sectors. Marechal decontactors are an effective alternative to both hard-wired equipment and pin/sleeve type contacts, the decontactor is a highly flexible method of connecting and disconnecting electrical equipment at the press of a latch – safely. Marechal Electric brought the decontactor, the high performance industrial plug connector with integral AC21 switch, to the electrical market.
Marechal DSN range of industrial power supply and motor connection plugs and sockets provide low voltage distribution, 20amps-63amps. Marechal DSN range industrial plugs are the quality standard for manufacturing industry providing the following benefits compliant with International Standard IEC60309-1 and European Standard EN60309-1 (Plugs & Sockets Outlets for Industrial Purposes) :
*20amp-63amp current ratings for plug and socket assemblies
*500v-1000v a.c.
*IP66/IP67 water and dust tight plug assemblies
*AC-22 / AC-23 load breaking capability
*GRP casings, chemical and IK08 shock resistant
*Plugs resistant to temperature changes -40 to +60 Degrees Celsius
*Equipped with silver-nickel butt contacts for lifetime reliability
Typical Marechal DSN Industrial Plugs Applications - power supply to motor and pump connections, food and drinks industry, heavy industry, water utilities and treatment, mines and quarries, ship to shore plug connections, gensets, power supply to production lines and manufacturing operations. Marechal DSN plugs and sockets range of decontactors is supported by a full line of wall mounting sockets, inclined sockets, coupler sockets, wall mounting appliance inlets and inclined appliance inlets.
Marechal DSN range of industrial power supply and motor connection plugs and sockets provide low voltage distribution, 20amps-63amps. Marechal DSN range industrial plugs are the quality standard for manufacturing industry providing the following benefits compliant with International Standard IEC60309-1 and European Standard EN60309-1 (Plugs & Sockets Outlets for Industrial Purposes) :
*20amp-63amp current ratings
*500v-1000v a.c.
*IP66/IP67 water and dust tight plug assemblies
*AC-22 / AC-23 load breaking capability
*GRP casings, chemical and IK08 shock resistant
*Resistant to temperature changes -40 to +60 Degrees Celsius
*Equipped with silver-nickel butt contacts for lifetime reliability
T&D UK also stock distribute the ATEX Certified range of Marechal Hazardous Area plugs and sockets (decontactors) for Zones 1, 2, 21 and 22 installation.
Marechal Plugs & Sockets : Press Release
Belgian vegetable preparation company, Legumex, uses around 100,000m3 of water annually for the cleaning and preparation of fresh vegetables - this amount of water and 24/7 operation 365 days a year, means that their electrical plug and socket connections must be completely water-tight, robust and reliable. Legumex uses Marechal DSN1 Decontactor plugs and sockets on the permanent power supplies to the production line and in the maintenance workshop. Rated for currents of up to 20A, Marechal DSN1 Decontactors are sealed to IP66/67 making them completely watertight even for pressure-washing, when connected and disconnected. An integrated switch mechanism means that the maintenance team can immediately and safely disconnect or connect equipment without the need for a qualified electrician. This makes maintenance faster and significantly more cost-effective than the alternative of hard wired equipment. Marechal plugs and sockets are made from glass-reinforced polyester body, silver-nickel butt contacts and vibration-proof terminals - Marechal Decontactors are resistant to corrosion and shock, providing long-term reliability, even after thousands of connections and disconnections.
Marechal DB disconnectable motor switches combine the functions of switch-engine cut-off switch and plug and socket-outlet. The Marechal DB motor switches guarantee the safety of persons during an operation on the load (motor load or highly inductive).
Marechal DB Motor Switch Features:
Metal Casing resistant to mechanical shocks (IK09), and corrosion
Padlocking System
IP66 / IP67 cover
Silver-nickel buttcontacts:excellent current carrying performance.
Marechal DB Plug & Socket Motor Switch Range:
Marechal DB3 - 7.5kW
Marechal DB6 - 22kW
Marechal DB9 - 45Kw
Marechal Electric pioneered the use of high performance, silver-nickel butt contacts in electrical plug and socket systems (decontactors), which are now available for applications from simple compact multi-pin to heavy duty 600A plug connections. Marechal technology is used across a range of demanding environments such as the food and drink, nuclear power, heavy industry, infrastructure and ATEX hazardous area sectors. Marechal decontactors are an effective alternative to both hard-wired equipment and pin/sleeve type contacts, the decontactor is a highly flexible method of connecting and disconnecting electrical equipment at the press of a latch – safely. Marechal Electric brought the decontactor, the high performance industrial plug connector with integral AC21 switch, to the electrical market.
Within its range of ATEX power connectors and decontactor sockets, Marechal Electric offers Ex rated multipin connectors for use both on – and off-shore for power, signals and low-level data transmission applications. In common with all Marechal connectors, these multipins use contacts that are of the technically advanced silver-nickel butt contact type which maximise both current carrying capacity whilst resisting oxidisation.
The latest addition to this range is the versatile Marechal PNCX – a 440V max. 5 pin Zone2 compact connector. Current carrying range is from 4-20mA to 10A whilst its mechanical terminals accept conductors from 0,75mm2 to 2,5mm2. Supplied as a 5 pin connector it’s rated when connected to IP66/IP67 and IP68 (depth tested at 10 metres for 15 days). Good for use in Zones 2 (gas) and 22 (dust) the Marechal PNCX can be used for various applications including lighting. A locking ring prevents unwanted separation.
For use in Zones 1 & 2 (gas) and 2 & 22 (dust) engineers can choose between high specification 12, 25 and 37 corrosion-free metal bodied, multipin, ‘e’ rated connectors. Protection rating: II2 G D Ex e ia OR ib II C. All three versions – Marechal PXN12C (220V), DXN25C (440V) and DXN37C (220V) are supplied with the requisite number of contacts, packed in bags of 13. Making off these multipins is now much easier in that the contacts can be crimped (or soldered if preferred) on the bench before being inserted into the plug and socket casing with the specially supplied tool
Marechal DX decontactors are designed for hazardous areas with 'de' protection mode. The Marechal DX plugs & sockets comply with the ATEX 94/9/CE Directive.
Marechal ATEX DX plugs and sockets can be used in zones 1 & 2 (gas) and zones 21 & 22 (dust). The DX decontactors are also certified according to IECEx standards.
Marechal DX ATEX Plugs & Sockets Mechanical Specifications:
Marechal IP65 plug and socket-outlet with 'de' protection mode for hazardous areas (ATEX) with integral switching device, comply with BECMA international standard.
Marechal DX ATEX Plugs & Sockets features:
Ex II2 G D Ex DE IIC
IP65 Water & dust tight
Integrated load break switch
Locking in On/Off positions by keying axis
Marechal DX ATEX Plugs & Sockets Technical Features:
Rated Current (In): 20A - 200A
Umax: 750V
Keying Positions: 12
Ambient Temperature: -25°C to +60°C
ATEX Zones: Zones 1 & 2 (gas) Zones 21 & 22 (dusts) - for all DIX
Marechal Plugs, Sockets & Connectors for Motor Connections
*Casings made from anti-corrosion treated metal or polyester
*Breaking capacity AC23 (EN 60947-3 Standard)
*Ambient temperature -40 to +60 Degrees Celsius
*Connectors comply with EN 60309-1 European Standard
*Polarity - 6 Pin + Earth + Auxillaries
Marechal motor connectors are available as 30Amp (DSN7C3), 50Amp (DS7C3), 90Amp (DN7C6) and 150Amp (DS7C9).
Marechal Electric pioneered the use of high performance, silver-nickel butt contacts in electrical plug and socket systems (decontactors), which are now available for applications from simple compact multi-pin to heavy duty 600A plug connections. Marechal technology is used across a range of demanding environments such as the food and drink, nuclear power, heavy industry, infrastructure and ATEX hazardous area sectors. Marechal decontactors are an effective alternative to both hard-wired equipment and pin/sleeve type contacts, the decontactor is a highly flexible method of connecting and disconnecting electrical equipment at the press of a latch – safely. Marechal Electric brought the decontactor, the high performance industrial plug connector with integral AC21 switch, to the electrical market.
Marechal DSN range of industrial power supply and motor connection plugs and sockets provide low voltage distribution, 20amps-63amps. Marechal DSN range industrial plugs are the quality standard for manufacturing industry providing the following benefits compliant with International Standard IEC60309-1 and European Standard EN60309-1 (Plugs & Sockets Outlets for Industrial Purposes) :
*20amp-63amp current ratings *500v-1000v a.c.
*IP66/IP67 water and dust tight plug assemblies
*AC-22 / AC-23 load breaking capability
*GRP casings, chemical and IK08 shock resistant
*Resistant to temperature changes -40 to +60 Degrees Celsius
*Equipped with silver-nickel butt contacts for lifetime reliability
T&D UK also stock distribute the ATEX Certified range of Marechal Hazardous Area plugs and sockets (decontactors) for Zones 1, 2, 21 and 22 installation.
Marechal Plugs & Sockets : Press Release Belgian vegetable preparation company, Legumex, uses around 100,000m3 of water annually for the cleaning and preparation of fresh vegetables - this amount of water and 24/7 operation 365 days a year, means that their electrical plug and socket connections must be completely water-tight, robust and reliable. Legumex uses Marechal DSN1 Decontactor plugs and sockets on the permanent power supplies to the production line and in the maintenance workshop. Rated for currents of up to 20A, Marechal DSN1 Decontactors are sealed to IP66/67 making them completely watertight even for pressure-washing, when connected and disconnected. An integrated switch mechanism means that the maintenance team can immediately and safely disconnect or connect equipment without the need for a qualified electrician. This makes maintenance faster and significantly more cost-effective than the alternative of hard wired equipment. Marechal plugs and sockets are made from glass-reinforced polyester body, silver-nickel butt contacts and vibration-proof terminals - Marechal Decontactors are resistant to corrosion and shock, providing long-term reliability, even after thousands of connections and disconnections.
Marechal DSN range of industrial power supply and motor connection plugs and sockets provide low voltage distribution, 20amps-63amps. Marechal DSN range industrial plugs are the quality standard for manufacturing industry providing the following benefits compliant with International Standard IEC60309-1 and European Standard EN60309-1 (Plugs & Sockets Outlets for Industrial Purposes) :
*20amp-63amp current ratings *500v-1000v a.c.
*IP66/IP67 water and dust tight plug assemblies
*AC-22 / AC-23 load breaking capability
*GRP casings, chemical and IK08 shock resistant
*Resistant to temperature changes -40 to +60 Degrees Celsius
*Equipped with silver-nickel butt contacts for lifetime reliability
T&D UK also stock distribute the ATEX Certified range of Marechal Hazardous Area plugs and sockets (decontactors) for Zones 1, 2, 21 and 22 installation.
Marechal Plugs & Sockets : Press Release Belgian vegetable preparation company, Legumex, uses around 100,000m3 of water annually for the cleaning and preparation of fresh vegetables - this amount of water and 24/7 operation 365 days a year, means that their electrical plug and socket connections must be completely water-tight, robust and reliable. Legumex uses Marechal DSN1 Decontactor plugs and sockets on the permanent power supplies to the production line and in the maintenance workshop. Rated for currents of up to 20A, Marechal DSN1 Decontactors are sealed to IP66/67 making them completely watertight even for pressure-washing, when connected and disconnected. An integrated switch mechanism means that the maintenance team can immediately and safely disconnect or connect equipment without the need for a qualified electrician. This makes maintenance faster and significantly more cost-effective than the alternative of hard wired equipment. Marechal plugs and sockets are made from glass-reinforced polyester body, silver-nickel butt contacts and vibration-proof terminals - Marechal Decontactors are resistant to corrosion and shock, providing long-term reliability, even after thousands of connections and disconnections.
Within its range of ATEX power connectors and decontactor sockets, Marechal Electric offers Ex rated multipin connectors for use both on – and off-shore for power, signals and low-level data transmission applications. In common with all Marechal connectors, these multipins use contacts that are of the technically advanced silver-nickel butt contact type which maximise both current carrying capacity whilst resisting oxidisation.
The latest addition to this range is the versatile Marechal PNCX – a 440V max. 5 pin Zone2 compact connector. Current carrying range is from 4-20mA to 10A whilst its mechanical terminals accept conductors from 0,75mm2 to 2,5mm2. Supplied as a 5 pin connector it’s rated when connected to IP66/IP67 and IP68 (depth tested at 10 metres for 15 days). Good for use in Zones 2 (gas) and 22 (dust) the Marechal PNCX can be used for various applications including lighting. A locking ring prevents unwanted separation.
For use in Zones 1 & 2 (gas) and 2 & 22 (dust) engineers can choose between high specification 12, 25 and 37 corrosion-free metal bodied, multipin, ‘e’ rated connectors. Protection rating: II2 G D Ex e ia OR ib II C. All three versions – Marechal PXN12C (220V), DXN25C (440V) and DXN37C (220V) are supplied with the requisite number of contacts, packed in bags of 13. Making off these multipins is now much easier in that the contacts can be crimped (or soldered if preferred) on the bench before being inserted into the plug and socket casing with the specially supplied tool
The Marechal DXN Plug and Socket Outlets (decontactors) comply with ATEX Hazardous Area Certification for use in Explosive Atmospheres including Zones 1 and 2 (gas) and Zones 21 and 22 (dust).
Marechal DXN ATEX certified hazardous area plugs and sockets are rated from 20-63amps, IP66/67 watertight ingress protection and with socket-outlet safety shutter providing IP4X protection. The Marechal DXN plugs and sockets also comply with EN 50018 (explosion proof safety "d") EN 50019 (increased safety "e"), EN 50281-1-1 (electrical equipment for use in flammable dust atmospheres) and IEC 60309-1 (plugs and socket-outlets for industrial purposes) standards.
Siemens,
Catalog Thiết Bị Điện Siemens, Catalog Thiết Bị Điện,
Catalog Phụ Kiện Siemens, Catalog Phụ Kiện,
Catalog Siemens, Catalog,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Siemens vui lòng gọi: 0907.764.966
Aswich Electrical: ERS Rapid Shut-down Switch(fire safety switch) Aswich Electrical
Suitable for 3-string,4-string,5-string modules
Maximum circuit current 55A
Maximum cricuit voltage 1500vdc
CE certificated
Sheet metal material, IP66 protection grade
Multi clock interface type optional (knockout hole / gland / MC4 terminal)
The Isolation switches are TUV.CE.CB.SAA certificated
Waterproof Vent valve to avoid condensation inside the shell
Advanced temperature sensor is used to detect the highest temperature in
the shell in real time temperature, when the internal temperature exceeds
70 degrees, automatic cut-off switch
It is suitable for residential, industrial and commercial photovoltaic systems
contact@aswich.com
http://www.aswich.com/
EDFH series fuse holder is made of refractory material, and meets the standard of IEC60947-3. The maximum rated voltage is 1500V and the maximum current is
30A. As a short circuit and over-current protector, it is widely used in the high and low voltage distribution system, control system, and electrical equipments,like distribution box and inverter.
contact@aswich.com
http://www.aswich.com/
Within its range of ATEX power connectors and decontactor sockets, Marechal Electric offers Ex rated multipin connectors for use both on – and off-shore for power, signals and low-level data transmission applications. In common with all Marechal connectors, these multipins use contacts that are of the technically advanced silver-nickel butt contact type which maximise both current carrying capacity whilst resisting oxidisation.
The latest addition to this range is the versatile Marechal PNCX – a 440V max. 5 pin Zone2 compact connector. Current carrying range is from 4-20mA to 10A whilst its mechanical terminals accept conductors from 0,75mm2 to 2,5mm2. Supplied as a 5 pin connector it’s rated when connected to IP66/IP67 and IP68 (depth tested at 10 metres for 15 days). Good for use in Zones 2 (gas) and 22 (dust) the Marechal PNCX can be used for various applications including lighting. A locking ring prevents unwanted separation.
For use in Zones 1 & 2 (gas) and 2 & 22 (dust) engineers can choose between high specification 12, 25 and 37 corrosion-free metal bodied, multipin, ‘e’ rated connectors. Protection rating: II2 G D Ex e ia OR ib II C. All three versions – Marechal PXN12C (220V), DXN25C (440V) and DXN37C (220V) are supplied with the requisite number of contacts, packed in bags of 13. Making off these multipins is now much easier in that the contacts can be crimped (or soldered if preferred) on the bench before being inserted into the plug and socket casing with the specially supplied tool
Marechal DX decontactors are designed for hazardous areas with 'de' protection mode. The Marechal DX plugs & sockets comply with the ATEX 94/9/CE Directive.
Marechal ATEX DX plugs and sockets can be used in zones 1 & 2 (gas) and zones 21 & 22 (dust). The DX decontactors are also certified according to IECEx standards.
Marechal DX ATEX Plugs & Sockets Mechanical Specifications:
Marechal IP65 plug and socket-outlet with 'de' protection mode for hazardous areas (ATEX) with integral switching device, comply with BECMA international standard.
Marechal DX ATEX Plugs & Sockets features:
Ex II2 G D Ex DE IIC
IP65 Water & dust tight
Integrated load break switch
Locking in On/Off positions by keying axis
Marechal DX ATEX Plugs & Sockets Technical Features:
Rated Current (In): 20A - 200A
Umax: 750V
Keying Positions: 12
Ambient Temperature: -25°C to +60°C
ATEX Zones: Zones 1 & 2 (gas) Zones 21 & 22 (dusts) - for all DIX
Marechal Plugs, Sockets & Connectors for Motor Connections
*Casings made from anti-corrosion treated metal or polyester
*Breaking capacity AC23 (EN 60947-3 Standard)
*Ambient temperature -40 to +60 Degrees Celsius
*Connectors comply with EN 60309-1 European Standard
*Polarity - 6 Pin + Earth + Auxillaries
Marechal motor connectors are available as 30Amp (DSN7C3), 50Amp (DS7C3), 90Amp (DN7C6) and 150Amp (DS7C9).
Marechal Electric pioneered the use of high performance, silver-nickel butt contacts in electrical plug and socket systems (decontactors), which are now available for applications from simple compact multi-pin to heavy duty 600A plug connections. Marechal technology is used across a range of demanding environments such as the food and drink, nuclear power, heavy industry, infrastructure and ATEX hazardous area sectors. Marechal decontactors are an effective alternative to both hard-wired equipment and pin/sleeve type contacts, the decontactor is a highly flexible method of connecting and disconnecting electrical equipment at the press of a latch – safely. Marechal Electric brought the decontactor, the high performance industrial plug connector with integral AC21 switch, to the electrical market.
Marechal DSN range of industrial power supply and motor connection plugs and sockets provide low voltage distribution, 20amps-63amps. Marechal DSN range industrial plugs are the quality standard for manufacturing industry providing the following benefits compliant with International Standard IEC60309-1 and European Standard EN60309-1 (Plugs & Sockets Outlets for Industrial Purposes) :
*20amp-63amp current ratings *500v-1000v a.c.
*IP66/IP67 water and dust tight plug assemblies
*AC-22 / AC-23 load breaking capability
*GRP casings, chemical and IK08 shock resistant
*Resistant to temperature changes -40 to +60 Degrees Celsius
*Equipped with silver-nickel butt contacts for lifetime reliability
T&D UK also stock distribute the ATEX Certified range of Marechal Hazardous Area plugs and sockets (decontactors) for Zones 1, 2, 21 and 22 installation.
Marechal Plugs & Sockets : Press Release Belgian vegetable preparation company, Legumex, uses around 100,000m3 of water annually for the cleaning and preparation of fresh vegetables - this amount of water and 24/7 operation 365 days a year, means that their electrical plug and socket connections must be completely water-tight, robust and reliable. Legumex uses Marechal DSN1 Decontactor plugs and sockets on the permanent power supplies to the production line and in the maintenance workshop. Rated for currents of up to 20A, Marechal DSN1 Decontactors are sealed to IP66/67 making them completely watertight even for pressure-washing, when connected and disconnected. An integrated switch mechanism means that the maintenance team can immediately and safely disconnect or connect equipment without the need for a qualified electrician. This makes maintenance faster and significantly more cost-effective than the alternative of hard wired equipment. Marechal plugs and sockets are made from glass-reinforced polyester body, silver-nickel butt contacts and vibration-proof terminals - Marechal Decontactors are resistant to corrosion and shock, providing long-term reliability, even after thousands of connections and disconnections.
Marechal DSN range of industrial power supply and motor connection plugs and sockets provide low voltage distribution, 20amps-63amps. Marechal DSN range industrial plugs are the quality standard for manufacturing industry providing the following benefits compliant with International Standard IEC60309-1 and European Standard EN60309-1 (Plugs & Sockets Outlets for Industrial Purposes) :
*20amp-63amp current ratings *500v-1000v a.c.
*IP66/IP67 water and dust tight plug assemblies
*AC-22 / AC-23 load breaking capability
*GRP casings, chemical and IK08 shock resistant
*Resistant to temperature changes -40 to +60 Degrees Celsius
*Equipped with silver-nickel butt contacts for lifetime reliability
T&D UK also stock distribute the ATEX Certified range of Marechal Hazardous Area plugs and sockets (decontactors) for Zones 1, 2, 21 and 22 installation.
Marechal Plugs & Sockets : Press Release Belgian vegetable preparation company, Legumex, uses around 100,000m3 of water annually for the cleaning and preparation of fresh vegetables - this amount of water and 24/7 operation 365 days a year, means that their electrical plug and socket connections must be completely water-tight, robust and reliable. Legumex uses Marechal DSN1 Decontactor plugs and sockets on the permanent power supplies to the production line and in the maintenance workshop. Rated for currents of up to 20A, Marechal DSN1 Decontactors are sealed to IP66/67 making them completely watertight even for pressure-washing, when connected and disconnected. An integrated switch mechanism means that the maintenance team can immediately and safely disconnect or connect equipment without the need for a qualified electrician. This makes maintenance faster and significantly more cost-effective than the alternative of hard wired equipment. Marechal plugs and sockets are made from glass-reinforced polyester body, silver-nickel butt contacts and vibration-proof terminals - Marechal Decontactors are resistant to corrosion and shock, providing long-term reliability, even after thousands of connections and disconnections.
Within its range of ATEX power connectors and decontactor sockets, Marechal Electric offers Ex rated multipin connectors for use both on – and off-shore for power, signals and low-level data transmission applications. In common with all Marechal connectors, these multipins use contacts that are of the technically advanced silver-nickel butt contact type which maximise both current carrying capacity whilst resisting oxidisation.
The latest addition to this range is the versatile Marechal PNCX – a 440V max. 5 pin Zone2 compact connector. Current carrying range is from 4-20mA to 10A whilst its mechanical terminals accept conductors from 0,75mm2 to 2,5mm2. Supplied as a 5 pin connector it’s rated when connected to IP66/IP67 and IP68 (depth tested at 10 metres for 15 days). Good for use in Zones 2 (gas) and 22 (dust) the Marechal PNCX can be used for various applications including lighting. A locking ring prevents unwanted separation.
For use in Zones 1 & 2 (gas) and 2 & 22 (dust) engineers can choose between high specification 12, 25 and 37 corrosion-free metal bodied, multipin, ‘e’ rated connectors. Protection rating: II2 G D Ex e ia OR ib II C. All three versions – Marechal PXN12C (220V), DXN25C (440V) and DXN37C (220V) are supplied with the requisite number of contacts, packed in bags of 13. Making off these multipins is now much easier in that the contacts can be crimped (or soldered if preferred) on the bench before being inserted into the plug and socket casing with the specially supplied tool
The Marechal DXN Plug and Socket Outlets (decontactors) comply with ATEX Hazardous Area Certification for use in Explosive Atmospheres including Zones 1 and 2 (gas) and Zones 21 and 22 (dust).
Marechal DXN ATEX certified hazardous area plugs and sockets are rated from 20-63amps, IP66/67 watertight ingress protection and with socket-outlet safety shutter providing IP4X protection. The Marechal DXN plugs and sockets also comply with EN 50018 (explosion proof safety "d") EN 50019 (increased safety "e"), EN 50281-1-1 (electrical equipment for use in flammable dust atmospheres) and IEC 60309-1 (plugs and socket-outlets for industrial purposes) standards.
Siemens,
Catalog Thiết Bị Điện Siemens, Catalog Thiết Bị Điện,
Catalog Phụ Kiện Siemens, Catalog Phụ Kiện,
Catalog Siemens, Catalog,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Siemens vui lòng gọi: 0907.764.966
Aswich Electrical: ERS Rapid Shut-down Switch(fire safety switch) Aswich Electrical
Suitable for 3-string,4-string,5-string modules
Maximum circuit current 55A
Maximum cricuit voltage 1500vdc
CE certificated
Sheet metal material, IP66 protection grade
Multi clock interface type optional (knockout hole / gland / MC4 terminal)
The Isolation switches are TUV.CE.CB.SAA certificated
Waterproof Vent valve to avoid condensation inside the shell
Advanced temperature sensor is used to detect the highest temperature in
the shell in real time temperature, when the internal temperature exceeds
70 degrees, automatic cut-off switch
It is suitable for residential, industrial and commercial photovoltaic systems
contact@aswich.com
http://www.aswich.com/
EDFH series fuse holder is made of refractory material, and meets the standard of IEC60947-3. The maximum rated voltage is 1500V and the maximum current is
30A. As a short circuit and over-current protector, it is widely used in the high and low voltage distribution system, control system, and electrical equipments,like distribution box and inverter.
contact@aswich.com
http://www.aswich.com/
Kraus & naimer disconnectors kn pv-gbDien Ha The
Catalog Kraus Naimer, Catalog,
Catalog Thiết Bị Điện Kraus Naimer, Catalog Thiết Bị Điện,
Catalog Biến Tần Kraus Naimer, Catalog Điện Công Nghiệp,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Kraus Naimer tại https://dienhathe.com
Xem thêm các Catalog khác của Kraus Naimer tại https://dienhathe.info
Để nhận báo giá sản phẩm Kraus Naimer vui lòng gọi: 0907.764.966
Marechal DX decontactors are designed for hazardous areas with 'de' protection mode. The Marechal DX plugs & sockets comply with the ATEX 94/9/CE Directive.
Marechal ATEX DX plugs and sockets can be used in zones 1 & 2 (gas) and zones 21 & 22 (dust). The DX decontactors are also certified according to IECEx standards.
Marechal DX ATEX Plugs & Sockets Mechanical Specifications:
Marechal IP65 plug and socket-outlet with 'de' protection mode for hazardous areas (ATEX) with integral switching device, comply with BECMA international standard.
Marechal DX ATEX Plugs & Sockets features:
Ex II2 G D Ex DE IIC
IP65 Water & dust tight
Integrated load break switch
Locking in On/Off positions by keying axis
Marechal DX6 Decontactor Metal Plug and Socket Features:
Rated current (with wiring according to standard): 63A
Maximum Voltage: 750V
IP Protection Lid Closed: IP65
IP Protection Connected Plug: IP65/IP66
Shock Resistance: IK10
Ambient Temperature: -40°C to +60°C
Atex Zones: 1 & 2 21 & 22
Marechal DB6 Disconnectable Motor Switches - 75 Amp, 15kW
The Marechal DB Decontactor for motors, pumps and highly inductive loads combines the functions of visible breaking motor switch and plug and socket outlet - Marechal decontactor plugs and socket units have a direct impact on safety, cost and machine downtime. Compliant with the machine Directive for power supply isolation allowing quick electrical equipment replacement.
Marechal DB6 typical applications - mobile motors, emergency installations, flexible production lines, testing benches for motors, fans, mobile conveyors, mixers and containers.
Operation of a Marechal Decontactor for Motors
The Marechal plug is positioned in the socket-outlet by pushing then twisting clockwise in much the same way as inserting an electric light bulb. The Marechal plug is then in the rest position, circuit open - this is indicated by a "green" window located on the front of the Marechal socket-outlet. At this stage, the plug can be locked onto the socket-outlet by means of a conventional lock-out. To close the electrical circuit, push the Marechal plug fully home, until it is held by the locking ring. The window located on the front of the socket-outlet becomes "red". IP67 is achieved by turning the ring clockwise. To release the Marechal plug, simply turn the ring fully anticlockwise. The circuit is opened and the plug returns to its parked position. To remove the plug from the socket-outlet, turn the plug from right to left. The lid can then be closed. Turn the ring from left to right to achieve IP67 socket-outlet watertightness.
IP67 Watertightness - Dust-proof and protected against temporary water immersion.
Marechal DS3 50Amp Plug & Socket (Decontactors) for Low Voltage Industrial Power Supply and Motor Connections
Marechal DS range of industrial power supply and motor connection plugs and sockets provide low voltage distribution, 30amps-250amps. Marechal DS range industrial plugs are the quality standard for manufacturing industry providing the following benefits compliant with International Standard IEC60309-1 and European Standard EN60309-1 (Plugs & Sockets Outlets for Industrial Purposes) :
*30amp-250amp current ratings
*500v-1000v a.c.
*IP54/IP55 water and dust tight plug assemblies (IP66/IP67 available)
*AC-22 / AC-23 load breaking capability
*GRP casings, chemical and IK08 shock resistant
*Metal casings, corrosion resistant, IK09 shock resistant
*Resistant to temperature changes -40 to +60 Degrees Celsius
*Equipped with silver-nickel butt contacts for lifetime reliability
T&D UK also stock distribute the ATEX Certified range of Marechal Hazardous Area plugs and sockets (decontactors) for Zones 1, 2, 21 and 22 installation.
Marechal Electric pioneered the use of high performance, silver-nickel butt contacts in electrical plug and socket systems (decontactors), which are now available for applications from simple compact multi-pin to heavy duty 600A plug connections. Marechal technology is used across a range of demanding environments such as the food and drink, nuclear power, heavy industry, infrastructure and ATEX hazardous area sectors. Marechal decontactors are an effective alternative to both hard-wired equipment and pin/sleeve type contacts, the decontactor is a highly flexible method of connecting and disconnecting electrical equipment at the press of a latch – safely. Marechal Electric brought the decontactor, the high performance industrial plug connector with integral AC21 switch, to the electrical market.
Marechal DB3 Disconnectable Motor Switches - 40 Amp, 7.5kW The Marechal DB Decontactor for motors, pumps and highly inductive loads combines the functions of visible breaking motor switch and plug and socket outlet - Marechal decontactor plugs and socket units have a direct impact on safety, cost and machine downtime. Compliant with the machine Directive for power supply isolation allowing quick electrical equipment replacement.
Marechal DB3 typical applications - mobile motors, emergency installations, flexible production lines, testing benches for motors, fans, mobile conveyors, mixers and containers.
Operation of a Marechal Decontactor for Motors
The Marechal plug is positioned in the socket-outlet by pushing then twisting clockwise in much the same way as inserting an electric light bulb. The Marechal plug is then in the rest position, circuit open - this is indicated by a "green" window located on the front of the Marechal socket-outlet. At this stage, the plug can be locked onto the socket-outlet by means of a conventional lock-out. To close the electrical circuit, push the Marechal plug fully home, until it is held by the locking ring. The window located on the front of the socket-outlet becomes "red". IP67 is achieved by turning the ring clockwise. To release the Marechal plug, simply turn the ring fully anticlockwise. The circuit is opened and the plug returns to its parked position. To remove the plug from the socket-outlet, turn the plug from right to left. The lid can then be closed. Turn the ring from left to right to achieve IP67 socket-outlet watertightness.
IP67 Watertightness - Dust-proof and protected against temporary water immersion.
Within its range of ATEX power connectors and decontactor sockets, Marechal Electric offers Ex rated multipin connectors for use both on – and off-shore for power, signals and low-level data transmission applications. In common with all Marechal connectors, these multipins use contacts that are of the technically advanced silver-nickel butt contact type which maximise both current carrying capacity whilst resisting oxidisation.
The latest addition to this range is the versatile Marechal PNCX – a 440V max. 5 pin Zone2 compact connector. Current carrying range is from 4-20mA to 10A whilst its mechanical terminals accept conductors from 0,75mm2 to 2,5mm2. Supplied as a 5 pin connector it’s rated when connected to IP66/IP67 and IP68 (depth tested at 10 metres for 15 days). Good for use in Zones 2 (gas) and 22 (dust) the Marechal PNCX can be used for various applications including lighting. A locking ring prevents unwanted separation.
For use in Zones 1 & 2 (gas) and 2 & 22 (dust) engineers can choose between high specification 12, 25 and 37 corrosion-free metal bodied, multipin, ‘e’ rated connectors. Protection rating: II2 G D Ex e ia OR ib II C. All three versions – Marechal PXN12C (220V), DXN25C (440V) and DXN37C (220V) are supplied with the requisite number of contacts, packed in bags of 13. Making off these multipins is now much easier in that the contacts can be crimped (or soldered if preferred) on the bench before being inserted into the plug and socket casing with the specially supplied tool
Marechal CD Distribution Boxes
Marechal Electric - Plugs, Sockets & Decontactors
The Marechal CD distribution box complies with CEI EN 61439-1 and CEI EN 61439-3. This Marechal box is composed of two parts fixed on hinges:
Upper section with pad-lockable window, for protection gear
Lower section for access to terminals
Marechal CD Distribution Box Enclosure
Marechal CD Distribution Box & Enclosure Benefits:
From16to63A
IP66/IP69k water- and dust-tight
RCD protection
Inspection window
1 or 2 Marechal socket outlets or decontactor sockets
Range of protection levels available
Marechal CD Distribution Box & Enclosure Features
Material: Impact-resistant thermoplastic (IK09)
Fastenings: Captive stainless steel screws
Protection Mode: IP66/IP69k - IP44 with domestic sockets
Rated Current: From 16 to 63 A
Cable Entries: M50 max
Housing Dimensions: 345 x 225 x 156
Assembly: 10 modules max
Connect with confidence and disconnect with safety - thanks to integral load-break isolating switch mechanism, the Marechal decontactor socket allows users to connect and disconnect electrical equipment safely up to 250 A : a release button cuts the power and de-energises the Marechal plug before it can be removed. Even in the event of a short-circuit, the Marechal connector guarantees user safety and eliminates any electrocution hazard.
Reduce downtime - when Marechal connectors are used in lieu of hard-wiring, a fitter can replace a motor safely and efficiently. A blocked submersible pump can be up and running in a matter of minutes instead of hours and with just one person. Operating costs are reduced as re-wiring on site is no longer necessary with Marehcal connectors.
Provides automatic IP66/67 watertight seal - the Marechal plug and socket is automatically watertight just by inserting the plug or by closing the socket lid when you remove the plug - there is no need to turn any sealing ring.
Ensure long working life - the Marechal decontactor butt contacts have silver-nickel tips which are an excellent conductor, corrosion-resistant, shock resistant (Ik08) and environmentally sound (-40 °C to +60 °C). Marechal assemblies provide a true fit-and-forget connector allowing continued production with out need to regularly replace power plugs and connectors.
Aswich Electrical:EDS1 DC Isolator Cage Type (1200V 16A~32A)Aswich Electrical
Aswich Electrical:EDS1 series isolation switch is suitable for a power system with rated voltage DC1500V or below and rated current 50A or below. The product can be used for infrequent switching-on and switching-off and can disconnect 1 ~ 4 MPPT lines at the same time. It is especially suitable for isolating lines in HVDC transmission and distribution systems, such as cutting off the high voltage direct current between solar panels and inverters.
contact@aswich.com
Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment
This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment.
You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically.
THE RULES OF SAFE ISOLATION ARE:
Obtain permission to start work (a Permit may be required in some situations)
Identify the source(s) of supply using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Isolate the supply(s)
Secure the isolation
Prove the system/equipment is DEAD using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Put up warning signs to tell other people that the electrical installation has been isolated
Once the system/equipment is proved DEAD, work can begin
Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.
THORNE & DERRICK based in the UK are international distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment.
Since 1985, T&D have established an international reputation based on SERVICE | INTEGRITY | TRUST.
Contact us for 3M, ABB, Alroc, AN Wallis, CATU, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform , Furse, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.
Let's dive deeper into the world of ODC! Ricardo Alves (OutSystems) will join us to tell all about the new Data Fabric. After that, Sezen de Bruijn (OutSystems) will get into the details on how to best design a sturdy architecture within ODC.
Search and Society: Reimagining Information Access for Radical FuturesBhaskar Mitra
The field of Information retrieval (IR) is currently undergoing a transformative shift, at least partly due to the emerging applications of generative AI to information access. In this talk, we will deliberate on the sociotechnical implications of generative AI for information access. We will argue that there is both a critical necessity and an exciting opportunity for the IR community to re-center our research agendas on societal needs while dismantling the artificial separation between the work on fairness, accountability, transparency, and ethics in IR and the rest of IR research. Instead of adopting a reactionary strategy of trying to mitigate potential social harms from emerging technologies, the community should aim to proactively set the research agenda for the kinds of systems we should build inspired by diverse explicitly stated sociotechnical imaginaries. The sociotechnical imaginaries that underpin the design and development of information access technologies needs to be explicitly articulated, and we need to develop theories of change in context of these diverse perspectives. Our guiding future imaginaries must be informed by other academic fields, such as democratic theory and critical theory, and should be co-developed with social science scholars, legal scholars, civil rights and social justice activists, and artists, among others.
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
1. ThesealingIP66/IP67(waterjetandtemporaryimmersion)isprovidedautomaticallywithoutadditionaloperation.The
DSNistheidealproductforthefoodindustry.
DSN COMPACT AND WATERTIGHT
DECONTACTOR™
20 A / 32 A / 63 A
AUTOMATIC IP66/IP67 WATER- AND
DUST-TIGHT SEALING
AC-22 AND AC-23 BREAKING CAPACITY
IMPACT-RESISTANT GRP CASING
With sizes from 20 to 63 A, DSN decontactors are highly compact: a 63 A plug is only
83 mm in diameter. Once connected, the plug and socket is automatically IP66/IP67,
the socket-outlet is also IP66/IP67 when the lid is closed.
IP66/IP67 WATER- AND DUST-TIGHT
Thedecontactorisasocket-outletwithintegralswitching.Itdoesnotneedtobeinterlockedwithaswitch.Theswitch
buttonishighlitforeasieridentification.Wheninstallingthesocket-outlet,ensuretheswitchbuttonispositioned
upwards.
MOUNTING: SWITCH SHOULD BE ON THE UPPER SIDE!
18
2. Plugsandsocketswithintegralload-breakswitchingcapabilitycomplyingwithIECEN60309-1andIECEN60309-4standards
DSNdecontactorscomplywith:
• IEC EN 60309-1 & IEC EN 60309-4 European and International standards (plugs and
socket-outlets for industrial purposes),
• The European Low Voltage Directive 2006/95/CE,
• The European ‘Machine Directive’ 2006/42/CE regarding equipment isolation,
• The French NF C 15-100 standard,
• The French decree dated 20 December 2011 pertaining to the wiring and operating condi-
tions of movable electrical apparatuses,
• The decrees relating to workers’ protection in Belgium, Spain and Italy,
• The switch utilization categories AC-22A and AC-23A described in IEC EN 60947-3.
• The UL 1682 (USA) and CSA C22.2 N° 182.1-07 (Canada) standards for plugs and socket-
outlets
AlsocertifiedbyVERITASLCIE,UL,AS,VDE,GOSTandcCSAus(French,Ameri-
can,Australian,German,RussianandCanadianinspectionlaboratories),andby
BUREAUVERITASMARINE.
DSN1 DSN3 DSN6
Rated current (In) 20 A 32 A 63 A
Umax 500 V 690 V 1 000 V
AC-22 switching capability 20 A / 500 V 32 A / 690 V 63 A / 690 V
AC-23 switching capability 20 A / 400 V 32 A / 400 V 63 A / 400 V
Auxiliary contacts (optional) - 2 4
Keying positions (1)
24 for all DSN
Ambient temperature -40 °C to +60 °C for all DSN
Short-circuit current Icc 10 kA for all DSN
(1)
To distinguish between different power supplies and applications
SPECIFICATION
Plug and socket-outlet with
incorporated breaking capacity AC-22
/ AC-23, IP66/IP67 without additional
operation, safety shutter (socket IP4X/
IPXXD) silver-nickel butt contacts and
metallic braid, comply with BECMA
international standard.
TECHNICAL FEATURES
STANDARDS ASPECTS
DSN
19
DSN
3. DSN1DECONTACTOR™ GRP
20 A
IP66/IP67
Voltage 50 Hz Polarity Part no. Part no.
2P 611408A 611808A
3P+E 6114033 6118033
1P+N+E 6114015 6118015
3P+E 6114013 6118013
3P+N+E 6114017 6118017
3P+E 6114093 6118093
3P+N+E 6114097 6118097
Other voltages, frequencies and polarities are available on request (see page 8)
SOCKET-
OUTLET female
DSN1 (20 A)
Rated current (with wiring according to standard) 20 A
Maximum voltage 500 V
IP protection lid closed IP66/IP67
IP protection connected plug IP66/IP67
Shock resistance IK08
Ambient temperature -40 °C to +60 °C
Flexible wiring (min-max) 1 - 2,5 mm2
Stranded wiring (min-max) 1,5 - 4 mm2
Other wiring on request
Keying positions 24
MAIN FEATURES
Comply with IEC EN 60309-1 and IEC EN 60309-4 standards 20 A / 500 V
Load-break capability according to IEC EN 60947-3 / AC-22A 20 A / 500 V
Load-break capability according to IEC EN 60947-3 / AC-23A 20 A / 400 V
Short-circuit current Icc 10 kA
TYPICALCONFIGURATION
Wall box poly 30°
611A053
Socket-outlet
6114017
WALL MOUNTING SOCKET DSN1
Straight handle poly
611A013
Inlet
6118017
PLUG DSN1
20 - 24 V
190 - 230 V
220 - 250 V
380 - 440 V
220 - 250 V 380 - 440 V
480 - 500 V
480 - 500 V
INLET male
DSN1 (20 A)
LOAD-BREAKCAPABILITYOFTHEDECONTACTOR™
DUAL VOLTAGE SOCKET-OUTLET
(SEE P.6)
20
CERTIFICAT N°
FR 60042266D
4. Type Material Part no.
France Poly 6118015D11
UK Poly 6118015D40
Germany Poly 6118015D30
Italy Poly 6118015D06
Straight poly Straight poly Angled poly Straight poly with
poly cable gland
Straight poly
without cable
gland with metric
threaded entry
9-18 mm 611A013 01NA313 5-12 mm 611A753 M20 611A253417
5-21 mm 611A413 9-18 mm 611A25325P M25 611A253418
14-25 mm 611A25332P M32 611A253419
INDUSTRIAL-DOMESTIC
ADAPTERS
HANDLES
ACCESSORIES & OPTIONS
Locking with shaft for 3 padlocks
ø 4 mm (padlocks not supplied)
Socket no. + 844
Lockable plug: contact us
E-Stop button
Socket no. + 453
Inlet cap
611A126
Closing mechanism (in-line connections)
(a pair of finger draw plates)
611A346
180° opening lid Socket no. + 10
Self-returning lid Socket no. + R
180° opening and self-returning lid Socket no. + 18
DSN
Industrial inlet MARECHAL®
1P+N+E + domestic socket-outlet
10/16 A 230V.
Wall box
poly 30°
Wall box poly +
Inclined poly 70°
Entry
M20 611A053
Not drilled and
without cable
gland
Part no. 51AA058
Inclined
poly 30°
Inclined
poly 70°
611A027 51AA757
BOXES
Cable gland
not included
SLEEVES
21
5. DSN3DECONTACTOR™ GRP
32 A
IP66/IP67
Voltage 50 Hz Polarity Part no. Part no.
2P 613408A 613808A
3P+E 6134033 6138033
1P+N+E 6134015 6138015
3P+E 6134013 6138013
3P+N+E 6134017 6138017
3P+E 6134193 6138193
3P+N+E 6134197 6138197
Other voltages, frequencies and polarities are available on request (see page 8)
SOCKET-
OUTLET female
DSN3 (32 A)
Rated current (with wiring according to standard) 32 A
Maximum voltage 690 V
IP protection lid closed IP66/IP67
IP protection connected plug IP66/IP67
Shock resistance IK08
Ambient temperature -40 °C to +60 °C
Flexible wiring (min-max) 2,5 - 6 mm2
Stranded wiring (min-max) 2,5 - 10 mm2
Other wiring on request
Keying positions 24
MAIN FEATURES
Comply with IEC EN 60309-1 and IEC EN 60309-4 standards 32 A / 690 V
Load-break capability according to IEC EN 60947-3 / AC-22A 32 A / 690 V
Load-break capability according to IEC EN 60947-3 / AC-23A 32 A / 400 V
Short-circuit current Icc 10 kA
TYPICALCONFIGURATION
Wall box poly 30°
613A053
Socket-outlet
6134017
WALL MOUNTING SOCKET DSN3
Straight handle poly
613A013
Inlet
6138017
PLUG DSN3
INLET male
DSN3 (32 A)
LOAD-BREAKCAPABILITYOFTHEDECONTACTOR™
AUXILIARY CONTACTS
Socket-outlet with 2 auxiliary contacts (30 A / 500 V) Socket no. + 972
Inlet with 2 auxiliary contacts (30 A / 500 V) Inlet no. + 972
20 - 24 V
190 - 230 V
220 - 250 V
380 - 440 V
220 - 250 V
660 - 690 V
380 - 440 V 660 - 690 V
380 - 440 V
DUAL VOLTAGE SOCKET-OUTLET
(SEE P.6)
22
CERTIFICAT N°
FR 60042266E
6. Straight poly Straight poly with
poly cable gland
Straight metal
with metal cable
gland
Straight poly
without cable
gland with metric
threaded entry
5-21 mm 613A013 5-12 mm 613A753 7-13 mm 613A963 M20 613A253417
9-18 mm 613A25325P 8-16 mm 613A95325M M25 613A253418
14-25 mm 613A25332P M32 613A253419
22-32 mm 613A25340P M40 613A253420
INDUSTRIAL-DOMESTIC
ADAPTERS
HANDLES
DSN
Industrial inlet MARECHAL®
1P+N+E domestic socket-outlet
10/16 A 230V fuse protection 10 A and 16 A.
ACCESSORIES & OPTIONS
Locking with shaft for 3 padlocks
ø 4 mm (padlocks not supplied)
Socket no. + 844
Lockable plug: contact us
E-Stop button
Socket no. + 453
Slelf-closing lid for inlet
311A226
Inlet cap
613A126
Closing mechanism (in-line connections)
(a pair of finger draw plates)
613A346
180° opening lid Socket no. + 10
Self-returning lid Socket no. + R
180° opening and self-returning lid Socket no. + 18
Phasetester
This accessory checks the correct wiring of
phases from 250 to 690 V, and tests the
phase orientation of three phase sources.
Please consult us.
INFO+
Wall box
poly 30°
Wall box metal +
Inclined poly 30°
Wall box metal +
straight metal
sleeve
Wall box poly +
Inclined poly 70°
Entry
M20 613A053 613A653 693A095 Not drilled and
without cable
gland
Part no. 51BA058
M25 613A083 613A653418 693A095418
M32 613A653419 693A095419
M40 613A653420 693A095420
Inclined
poly 30°
Inclined
poly 70°
Straight
metal
613A027 51BA757 693A127
BOXES
Cable gland
not included
SLEEVES
Type Material Part no.
France Poly 6138015D11*
UK Poly 6138015D40
Germany Poly 6138015D30
Italy Poly 6138015D06
23
7. DSN6DECONTACTOR™ GRP
63 A
IP66/IP67
Voltage 50 Hz Polarity Part no. Part no.
2P 616408A 616808A
3P+E 6164033 6168033
1P+N+E 6164015 6168015
3P+E 6164013 6168013
3P+N+E 6164017 6168017
3P+E 6164193 6168193
3P+N+E 6164197 6168197
Other voltages, frequencies and polarities are available on request (see page 8)
SOCKET-
OUTLET female
DSN6 (63 A)
Rated current (with wiring according to standard) 63 A
Maximum voltage 1000 V
IP protection lid closed IP66/IP67
IP protection connected plug IP66/IP67
Shock resistance IK08
Ambient temperature -40 °C to +60 °C
Flexible wiring (min-max) 6 - 16 mm2
Stranded wiring (min-max) 10 - 25 mm2
Other wiring on request
Keying positions 24
MAIN FEATURES
Comply with IEC EN 60309-1 and IEC EN 60309-4 standards (63 A / 690 V) or (45 A / 1 000 V)
Load-break capability according to IEC EN 60947-3 / AC-22A 63 A / 690 V
Load-break capability according to IEC EN 60947-3 / AC-23A 63 A / 400 V
Short-circuit current Icc 10 kA
TYPICALCONFIGURATION
Wall box poly 70°
51CA058
Socket-outlet
6164017
WALL MOUNTING SOCKET DSN6
Straight handle poly
616A013
Inlet
6168017
PLUG DSN6
INLET male
DSN6 (63 A)
LOAD-BREAKCAPABILITYOFTHEDECONTACTOR™
AUXILIARY CONTACTS
Socket-outlet with 2 auxiliary contacts (16 A / 400 V) Socket no. + 972
Inlet with 2 auxiliary contacts (16 A / 400 V) Inlet no. + 972
Socket-outlet with 4 auxiliary contacts (16 A / 400 V) Socket no. + 264
Inlet with 4 auxiliary contacts (16 A / 400 V) Inlet no. + 264
20 - 24 V
190 - 230 V
220 - 250 V
380 - 440 V
220 - 250 V
660 - 690 V
380 - 440 V 660 - 690 V
380 - 440 V
DUAL VOLTAGE SOCKET-OUTLET
(SEE P.6)
24
CERTIFICAT N°
FR 60037180-537184N
8. DSN
ACCESSORIES & OPTIONS
Locking with shaft for 3 padlocks
ø 4 mm (padlocks not supplied)
Socket no. + 844
Lockable plug: contact us
E-Stop button
Socket no. + 453
Inlet cap
616A126
Closing mechanism (in-line connections)
(a pair of finger draw plates)
616A346
180° opening lid Socket no. + 10
Self-returning lid Socket no. + R
180° opening and self-returning lid Socket no. + 18
*With built-in finger draw plate (recommended for inline connections)
Wall box
poly 30°
Wall box metal +
Inclined poly 30°
Wall box metal +
straight metal sleeve
Wall box metal +
Inclined metal 70°
Wall box poly +
Inclined poly 70°
Entry
M25 616A053 616A653 696A095 873A053 Not drilled and wit-
hout cable gland
Part no. 51CA058
M32 616A653419 696A095419 873A053419
M40 616A653420 696A095420 873A053420
Inclined
poly 30°
Inclined
poly 70°
Straight
metal
Inclined
metal 70°
616A027 51CA757 696A127 873A087
Straight poly Straight poly with
poly cable gland
Straight metal
with metal cable
gland
Straight poly
without cable
gland with metric
threaded entry
10-30 mm 616A013 5-12 mm 616A25320P 7-13 mm 616A95320M M20 616A253417
10-30 mm 616A473* 9-18 mm 616A753 8-16 mm 616A963 M25 616A253418
14-25 mm 616A25332P 16-24 mm 616A95332M M32 616A253419
18-32 mm 616A25340P 22-32 mm 616A95340M M40 616A253420
BOXES
Cable gland
not included
SLEEVES
HANDLES
Slelf-closing lid for inlet
313A226
25