The Amprobe MAN02-A is a portable manometer for measuring differential pressure. It has a large dual digital display, measures gauge and differential pressure in various units, and can record minimum and maximum values. It also includes a USB port to download measurement data to a PC using optional software. The manometer has a battery life of 14 hours and is ideal for HVAC/R and pneumatic control applications.
The Serinus 10 Ozone (O3) analyser delivers precise and reliable performance at excellent value. It uses proven non-dispersive ultraviolet (UV) absorption technology to measure O3 in ambient air (LDL < 0.5 ppb, range 0 – 20 ppm).
The Serinus range of analysers has been designed using our experience and knowledge gained from operating large air quality monitoring networks for more than 35 years. The result: instruments that integrate seamlessly into continuous monitoring networks.
The Serinus 50 Sulfur Dioxide (SO2) analyser delivers precise and reliable performance at excellent value. It uses proven pulsed UV fluorescent radiation technology to measure SO2 in ambient air (LDL <0.3 ppb, Range 0-20 ppm).
The Serinus range of analysers has been designed using our experience and knowledge gained from operating large air quality monitoring networks for more than 35 years. The result: instruments that integrate seamlessly into continuous monitoring networks.
Spec sheet Cemtek Model 1000 Oxygen MonitorBrian Gilmore
Key Features:
• Modular probe design with blowdown ideal for high dust,
corrosive applications
• FM Approved
• Ease of maintenance with no probe removal to replace
element
• Combustion efficiency mode available as option
• Remote control of calibration and blowdown routines via
digital inputs
• Detector sensor replacement and maintenance is half
the cost of equivalent competitive products
https://www.linkedin.com/pub/brian-gilmore/4/705/238
Fluke Data Acquisition System Selection Guide. Hubungi PT. Siwali Swantika 02...PT. Siwali Swantika
Datasheet Fluke 1586A Super-DAQ. Datasheet Fluke 2638A Hydra Series III. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
The Serinus 40 Oxides of Nitrogen analyser delivers precise and reliable performance at excellent value. It uses proven chemiluminescence technology to measure NO, NO2 and NOx in ambient air (LDL <0.4 ppb, range 0-20 ppm).
The Serinus 40 Oxides of Nitrogen analyser delivers precise and reliable performance at excellent value. It uses proven chemiluminescence technology to measure NO, NO2 and NOx in ambient air (LDL <0.4 ppb, range 0-20 ppm).
Transcat + Emerson Webinar: Maximize Safety and Reliability with the Only Wir...Transcat
Join us as Transcat and Kevin Thomas, Emerson's Level Instrumentation Expert, host this informative webinar. In this webinar you will learn about: overfill prevention, how to be alerted to issues such as coating or corrosion, how to monitor and control using the 2140 series Level Detectors, and how to detect sand & sediment with these level detectors.
Shop Rosemount Products: http://www.transcat.com/brand/rosemount?cat=3
The Serinus 10 Ozone (O3) analyser delivers precise and reliable performance at excellent value. It uses proven non-dispersive ultraviolet (UV) absorption technology to measure O3 in ambient air (LDL < 0.5 ppb, range 0 – 20 ppm).
The Serinus range of analysers has been designed using our experience and knowledge gained from operating large air quality monitoring networks for more than 35 years. The result: instruments that integrate seamlessly into continuous monitoring networks.
The Serinus 50 Sulfur Dioxide (SO2) analyser delivers precise and reliable performance at excellent value. It uses proven pulsed UV fluorescent radiation technology to measure SO2 in ambient air (LDL <0.3 ppb, Range 0-20 ppm).
The Serinus range of analysers has been designed using our experience and knowledge gained from operating large air quality monitoring networks for more than 35 years. The result: instruments that integrate seamlessly into continuous monitoring networks.
Spec sheet Cemtek Model 1000 Oxygen MonitorBrian Gilmore
Key Features:
• Modular probe design with blowdown ideal for high dust,
corrosive applications
• FM Approved
• Ease of maintenance with no probe removal to replace
element
• Combustion efficiency mode available as option
• Remote control of calibration and blowdown routines via
digital inputs
• Detector sensor replacement and maintenance is half
the cost of equivalent competitive products
https://www.linkedin.com/pub/brian-gilmore/4/705/238
Fluke Data Acquisition System Selection Guide. Hubungi PT. Siwali Swantika 02...PT. Siwali Swantika
Datasheet Fluke 1586A Super-DAQ. Datasheet Fluke 2638A Hydra Series III. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
The Serinus 40 Oxides of Nitrogen analyser delivers precise and reliable performance at excellent value. It uses proven chemiluminescence technology to measure NO, NO2 and NOx in ambient air (LDL <0.4 ppb, range 0-20 ppm).
The Serinus 40 Oxides of Nitrogen analyser delivers precise and reliable performance at excellent value. It uses proven chemiluminescence technology to measure NO, NO2 and NOx in ambient air (LDL <0.4 ppb, range 0-20 ppm).
Transcat + Emerson Webinar: Maximize Safety and Reliability with the Only Wir...Transcat
Join us as Transcat and Kevin Thomas, Emerson's Level Instrumentation Expert, host this informative webinar. In this webinar you will learn about: overfill prevention, how to be alerted to issues such as coating or corrosion, how to monitor and control using the 2140 series Level Detectors, and how to detect sand & sediment with these level detectors.
Shop Rosemount Products: http://www.transcat.com/brand/rosemount?cat=3
Datasheet Fluke 7380A. Hubungi PT. Siwali Swantika 021-45850618PT. Siwali Swantika
Datasheet Fluke Automated Temperature Calibration System. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
The Martel CSI-30 and CSI-100 digital calibrators are designed to test instrumentation field of pneumatic valve actuators including, P / I transmitters, controllers, meters, switches, and recorders.
The Serinus 44 analyser delivers precise and reliable performance at excellent value. It uses proven chemiluminescence technology and an external thermal catalytic converter to measure NO, NO2, NOx and NH3 in ambient air (LDL < 0.4 ppb, Range 0 – 20 ppm).
The Serinus range of analysers has been designed using our experience and knowledge gained from operating large air quality monitoring networks for more than 40 years. The result: instruments that integrate seamlessly into continuous monitoring networks.
Datasheet Fluke Infrared Windows. Datasheet Fluke ClirVu Series. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
Pulp and paper applications create a notoriously harsh, high moisture and chemical-laden environment; coupled with extreme vibration in many of the processes. The following document outlines an array of level, pressure, and position applications and solutions for the pulp & paper industry.
The Exactus BAM is a real-time beta gauge built to satisfy users, regulators and those from the health community by providing truly accurate, precise, real time measurement of fine particulate matter automatically, it is a permanent installation with the capacity to be portable when needed.
FEATURES & SPECIFICATIONS
Real-time, accurate results without correction factors, regardless of season or geographic location
True ambient sampling provides accurate measurement of semi-volatile nitrates and organic compounds
Lightweight, rugged construction is easily mounted on a tripod in minutes
All-weather construction allows for true ambient sampling
Operates on AC power.
The AX Series of Vortex inline flowmeters measure flows of liquid, gas, and steam by measuring the rate at which vortices are alternately shed from a bluff body; this rate has been shown to be directly proportional to the flow velocity.
As flow passes a bluff body in the stream, vortices create pressure differentials which are measured by a piezoelectric crystal sensor, which converts these pulses into electrical signals. The meter uses an all-welded sensor design to create a strong unit and minimize potential leakage.
The AX Series can be configured to measure anything from simple volumetric flow of liquids and saturated steam up through multivariable measurements, including mass flow rate, pressure, temperature and density of liquids and steam.
Insertion style vortex meters measure fl ow by detecting the local velocity at a strategically located position within the pipe. Using local velocity, calculated by measuring the rate at which vortices are alternately shed from a bluff body within the sensor, the AX2300 uses parameters such as fluid type, pipe size, and Reynolds number to calculate accurate measurements.
Datasheet Fluke 9190A. Hubungi PT. Siwali Swantika 021-45850618PT. Siwali Swantika
Datasheet Fluke Ultra-Cool Field Metrology Well. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
Azbil North America recently added the AX series of multivariable vortex flowmeters for industrial process measurement and control to their product offering. The instrument combines temperature, pressure and velocity measurement in a single instrument to provide accurate mass flow measurement of gases, liquids and steam.
Weiber Technical Solutions launches Coffee
Moisture Meters that incorporates a range of design
refinements and highly developed features to bring a Top Quality 2-in-1 Meter that detect moisture &
temperature.
ZIPPTORK Wireless Torque Transducer and Torque Controller are applicable to most of power torque tools for bolting intelligently with excellent torque control accuracy and data collection
Prior to Assembly: For checking the torque tool capability and calibrating the torque setting
During Assembly: For controlling and recording the torque being applied to the bolted joint instantly and wirelessly
After Assembly: For effectively verifying the residual torque accuracy with angle / torque mode
Datasheet Fluke 7380A. Hubungi PT. Siwali Swantika 021-45850618PT. Siwali Swantika
Datasheet Fluke Automated Temperature Calibration System. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
The Martel CSI-30 and CSI-100 digital calibrators are designed to test instrumentation field of pneumatic valve actuators including, P / I transmitters, controllers, meters, switches, and recorders.
The Serinus 44 analyser delivers precise and reliable performance at excellent value. It uses proven chemiluminescence technology and an external thermal catalytic converter to measure NO, NO2, NOx and NH3 in ambient air (LDL < 0.4 ppb, Range 0 – 20 ppm).
The Serinus range of analysers has been designed using our experience and knowledge gained from operating large air quality monitoring networks for more than 40 years. The result: instruments that integrate seamlessly into continuous monitoring networks.
Datasheet Fluke Infrared Windows. Datasheet Fluke ClirVu Series. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
Pulp and paper applications create a notoriously harsh, high moisture and chemical-laden environment; coupled with extreme vibration in many of the processes. The following document outlines an array of level, pressure, and position applications and solutions for the pulp & paper industry.
The Exactus BAM is a real-time beta gauge built to satisfy users, regulators and those from the health community by providing truly accurate, precise, real time measurement of fine particulate matter automatically, it is a permanent installation with the capacity to be portable when needed.
FEATURES & SPECIFICATIONS
Real-time, accurate results without correction factors, regardless of season or geographic location
True ambient sampling provides accurate measurement of semi-volatile nitrates and organic compounds
Lightweight, rugged construction is easily mounted on a tripod in minutes
All-weather construction allows for true ambient sampling
Operates on AC power.
The AX Series of Vortex inline flowmeters measure flows of liquid, gas, and steam by measuring the rate at which vortices are alternately shed from a bluff body; this rate has been shown to be directly proportional to the flow velocity.
As flow passes a bluff body in the stream, vortices create pressure differentials which are measured by a piezoelectric crystal sensor, which converts these pulses into electrical signals. The meter uses an all-welded sensor design to create a strong unit and minimize potential leakage.
The AX Series can be configured to measure anything from simple volumetric flow of liquids and saturated steam up through multivariable measurements, including mass flow rate, pressure, temperature and density of liquids and steam.
Insertion style vortex meters measure fl ow by detecting the local velocity at a strategically located position within the pipe. Using local velocity, calculated by measuring the rate at which vortices are alternately shed from a bluff body within the sensor, the AX2300 uses parameters such as fluid type, pipe size, and Reynolds number to calculate accurate measurements.
Datasheet Fluke 9190A. Hubungi PT. Siwali Swantika 021-45850618PT. Siwali Swantika
Datasheet Fluke Ultra-Cool Field Metrology Well. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
Azbil North America recently added the AX series of multivariable vortex flowmeters for industrial process measurement and control to their product offering. The instrument combines temperature, pressure and velocity measurement in a single instrument to provide accurate mass flow measurement of gases, liquids and steam.
Weiber Technical Solutions launches Coffee
Moisture Meters that incorporates a range of design
refinements and highly developed features to bring a Top Quality 2-in-1 Meter that detect moisture &
temperature.
ZIPPTORK Wireless Torque Transducer and Torque Controller are applicable to most of power torque tools for bolting intelligently with excellent torque control accuracy and data collection
Prior to Assembly: For checking the torque tool capability and calibrating the torque setting
During Assembly: For controlling and recording the torque being applied to the bolted joint instantly and wirelessly
After Assembly: For effectively verifying the residual torque accuracy with angle / torque mode
We have Baumer make DP Transmitters. DP Transmitters are also known as Differential Pressure Transmitters, Pressure Difference Transmitters, PD Transmitters, DP Transmitters
Pacorr Melt Flow Index tester is used for evaluating the flow properties of molten plastics or resins. The Melt flow Index
of thermoplastic materials is defined as the rate of flow (in grams per ten minutes) of extrudates of molten resins through a
jet of a particular length and diameter.
Weiber Technical Solutions launches Coir Moisture meters that incorporates a range of design refinements and highly developed features to bring a Tp Quality 2-in-1 Meter that detect moisture & temperature.
ZIPPTORK Torque control system catalog 2021 Edition
Latest product catalog showing all the torque control-related products like vibration and shockproof wireless torque transducer, air tool controller, and software for real-time torque monitoring and torque-controlled bolting
Field Pressure Calibration and Equipment Maintenance Yokogawa1
Industrial automation is a revolutionary force in the reliability of large-scale business operations that are fundamental to our daily lives. Hundreds of thousands of sensors that measure everything from pressure to vibration can be found nearly everywhere, from factory floors to deep water oil wells. However, over time, sensors can degrade in performance, so it is critical to monitor and maintain the sensors to ensure they operate reliably throughout their useful life.
In this webinar you will learn:
The different types of sensors used in industrial processes
Basics of pressure sensor maintenance and validation
How device maintenance software can be used to efficiently monitor the health of field equipment
Allwin21 Corp. has been focusing on providing solutions and enhancements to the following used semiconductor equipment. These OEM semiconductor equipment have been used in productions and R&D since 1990′s. They’ve each been PROCESS-PROVEN. Allwin21 Corp. can refurbish and/or upgrade these OEM systems with Allwin21′s comparable integrated process control system with PC, solid 3-axis robotic wafer transfer system (if applicable), and new critical components to achieve the goal of giving our customers a production edge with right cost.
We have been doing upgrade for many production proven equipment, such as Perkin-Elmer 2400, Perkin-Elmer 4400, Perkin-Elmer 4410, Perkin-Elmer 4450, Perkin-Elmer 4480, Matrix 105 , Matrix 106, Matrix 303, Matrix 303, Matrix 403, Matrix 205, Matrix 101, Matrix 102, Matrix 103, Matrix 104,Tegal 901e, Tegal 903e, Lam Research LAM AutoEtch 490, Lam AutoEtch 590, Lam AutoEtch 690, Branson/IPC 2000, Branson IPC 3000, Branson/IPC 4000, Gasonics Aura 3000, Gasonics Aura 3010, Gasonics L3510, Gasoncis Aura 1000, Gasonics AE 2001, AG Associates Heatpulse 610, AG Associates Heatpulse 410, AG Associates Minipulse 310, AG Associates Heatpulse 210 on the field for many cases. The reliability have been improved a lot for most of the tools after upgrading. We designed the upgrade kits for these working tools that can do plug and play and most of them only need 2 to 3 days include training. For PE sputter, since it is a little complicated, but we still target to upgrade within one week include training if the machine without other problems.
Why upgrade your old used semiconductor process equipment ?
Low cost solution of obsolete components and parts.
Use new air cooling RF generator to replace the obsolete water cooling RF Generator, avoiding water flood in Fab/Lab.
Use new integrated solid robotic wafer transfer to replace the obsolete index/frog robotic wafer transfer
Requirement of stability of the system
Requirement of network function (GEM/SECSII).
Requirement of PC control for data storage.
Requirement of GUI.
Requirement of more precise control.
Requirement of better repeatability, uniformity.
Requirement of easier maintenance, calibration, and trouble shooting.
Tachometer Measures Speed Of An Object In Its Work Area. The Test Range Is 2.5 To 99,999 RPM with Accuracy Of (+0.05% +1digit) For More Information Please Logon http://cutt.us/J39h
The Cloud Point test cell is first flushed through with a fresh sample. A small amount of sample is then isolated in the cell and allowed to settle for a predetermined period to allow any air bubbles or solids to separate. The sample cell is then cooled at a controlled rate by a Peltier cooler with excess heat being removed by a coolant. An optical detector senses when the sample is starting to become cloudy as waxy components start to precipitate. The temperature at which this occurs is taken as the cloud point
Weiber Technical Solutions launches its new version of
moisture meter that incorporates a range of design
refinements and highly developed features to bring a
Top Quality 2-in-1 Meter that detect moisture &
temperature.
NIDM (National Institute Of Digital Marketing) Bangalore Is One Of The Leading & best Digital Marketing Institute In Bangalore, India And We Have Brand Value For The Quality Of Education Which We Provide.
www.nidmindia.com
This comprehensive program covers essential aspects of performance marketing, growth strategies, and tactics, such as search engine optimization (SEO), pay-per-click (PPC) advertising, content marketing, social media marketing, and more
Want to move your career forward? Looking to build your leadership skills while helping others learn, grow, and improve their skills? Seeking someone who can guide you in achieving these goals?
You can accomplish this through a mentoring partnership. Learn more about the PMISSC Mentoring Program, where you’ll discover the incredible benefits of becoming a mentor or mentee. This program is designed to foster professional growth, enhance skills, and build a strong network within the project management community. Whether you're looking to share your expertise or seeking guidance to advance your career, the PMI Mentoring Program offers valuable opportunities for personal and professional development.
Watch this to learn:
* Overview of the PMISSC Mentoring Program: Mission, vision, and objectives.
* Benefits for Volunteer Mentors: Professional development, networking, personal satisfaction, and recognition.
* Advantages for Mentees: Career advancement, skill development, networking, and confidence building.
* Program Structure and Expectations: Mentor-mentee matching process, program phases, and time commitment.
* Success Stories and Testimonials: Inspiring examples from past participants.
* How to Get Involved: Steps to participate and resources available for support throughout the program.
Learn how you can make a difference in the project management community and take the next step in your professional journey.
About Hector Del Castillo
Hector is VP of Professional Development at the PMI Silver Spring Chapter, and CEO of Bold PM. He's a mid-market growth product executive and changemaker. He works with mid-market product-driven software executives to solve their biggest growth problems. He scales product growth, optimizes ops and builds loyal customers. He has reduced customer churn 33%, and boosted sales 47% for clients. He makes a significant impact by building and launching world-changing AI-powered products. If you're looking for an engaging and inspiring speaker to spark creativity and innovation within your organization, set up an appointment to discuss your specific needs and identify a suitable topic to inspire your audience at your next corporate conference, symposium, executive summit, or planning retreat.
About PMI Silver Spring Chapter
We are a branch of the Project Management Institute. We offer a platform for project management professionals in Silver Spring, MD, and the DC/Baltimore metro area. Monthly meetings facilitate networking, knowledge sharing, and professional development. For event details, visit pmissc.org.
How Mentoring Elevates Your PM Career | PMI Silver Spring Chapter
Man02 a manometer
1. www.Amprobe.comAmprobe® Test Tools
Data Sheet
No hassle
warranty
No waiting.
No shipping
charges.
Our commitment to
high-quality products
and customer service
is demonstrated by
our industry exclusive
“No Hassle” warranty.
In the unlikely event
that an Amprobe Test
Tool requires warranty
service, any of our
local dealers are
authorized to replace
it, on the spot.
(note: $500 MSLP limit)
MAN02-A
Manometer for
Differential Pressure
The Amprobe MAN02-A is a portable, battery operated
pressure measuring device. The right tool for HVAC/R
technicians measuring pressure level, or anyone working with
valves, control sensors in a pneumatic control environment.
Large dual digital display shows gauge or differential pressure
values. It also has a relative time clock for measuring when
events happen. Such as minimums and maximum values.
Or use the USB port output to record continuous
measurement values. (USB cable sold separately.) Amprobe’s
Download Suite software available online.
Reads gauge and differential pressure■■
Five selectable units of measure: InH■■ 2O, psi, mbar, bar,
mmH2O
Ideal for measuring HVAC/R pressure levels■■
Also used for Pneumatic controls■■
Offers Maximum and Minimum value recordings, Data■■
Hold
Auto power off function, Large backlight LCD■■
Built-in USB port downloads information to your PC with■■
optional PC cable and Amprobe’s free Download Suite
software
Includes connection hoses■■