This report provides an updated mineral resource estimate for the MMDC Nickel Project located in Surigao del Sur, Philippines as of December 2012. A total of 1,289 drill holes were completed within the project area, with assay results indicating the presence of high-iron limonite ore and high-nickel saprolite ore. Using a polygon method and classification guidelines consistent with CIM and JORC standards, the total Measured and Indicated mineral resources are estimated to be 11.84 million tonnes averaging 1.52% nickel. Additionally, the total Inferred resources are estimated to be 17.94 million tonnes averaging 1.37% nickel. This represents an update from the 2010 resource estimate.
INDEPENDENT REPORT ON THE NICKEL LATERITE RESOURCE - AGATA SOUTH, PHILIPPINES...No to mining in Palawan
INDEPENDENT REPORT ON THE NICKEL LATERITE RESOURCE -
AGATA SOUTH, PHILIPPINES.
Agusan del Norte Province,
Philippines.
MINDORO RESOURCES LIMITED
Suite 104, 17707 – 105 Avenue
Edmonton, Alberta T5S 1T1
Canada
4th November 2011
Mark G Gifford MSc (Hons), FAusIMM
The Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves (‘the JORC Code’) is a professional code of practice that sets minimum standards for Public Reporting of minerals Exploration Results, Mineral Resources and Ore Reserves.
INDEPENDENT REPORT ON THE NICKEL LATERITE RESOURCE - AGATA SOUTH, PHILIPPINES...No to mining in Palawan
INDEPENDENT REPORT ON THE NICKEL LATERITE RESOURCE -
AGATA SOUTH, PHILIPPINES.
Agusan del Norte Province,
Philippines.
MINDORO RESOURCES LIMITED
Suite 104, 17707 – 105 Avenue
Edmonton, Alberta T5S 1T1
Canada
4th November 2011
Mark G Gifford MSc (Hons), FAusIMM
The Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves (‘the JORC Code’) is a professional code of practice that sets minimum standards for Public Reporting of minerals Exploration Results, Mineral Resources and Ore Reserves.
How can minerals deposits be formed; GEOLOGICAL PROCESSES; Ore Fluids; Ore Forming Processes; Concentrating Processes; Magmatic mineral deposits; Residual mineral deposits ; Placer deposits; Sedimentary mineral deposits; Metamorhogenic mineral deposits; Hydrothermal mineral deposits ; Magmatic Deposits
Cumulate deposits: fractional crystallization processes can concentrate metals (Cr, Fe, PGE, Pt, Ni, Ti, Diamond ))
Pegmatites : late staged crystallization forms pegmatites and many residual elements are concentrated (Li, Ce, Be, Sn, U, Rare Earths (REE), Feldspar, Mica, Gems).
magmatic deposits; Mode of Formation of Magmatic Ores Deposits; Mode of Formation of Orthomagmatic Ores ; Fractional Crystallization (or Crystal fractionation ); Magmatic (or Liquid ) Immiscibility; Simple crystallization without concentration (Dissemination); Segregation of early formed crystals; (Layer Types); Injection of material concentrated elsewhere by differentiation Residual liquid segregation; Residual liquid injection; Immiscible liquid segregation; Immiscible-liquid-injection; Early magmatic deposit; Late magmatic deposit; Types of Magmatic Ore Deposits:Chromite; Fe-Ti (± V) oxides; Ni – Cu – Fe (± Pt) sulfides; Platinum Group Elements (PGEs); REE, and Zr in Carbonatites; Diamond in kimberlites.
Methods and stages of Mineral Exploration: Adaptive Resource Management PlanNgatcha Bryan
Exploration can be divided into a number of interlinked and sequential stages which involve increasing
expenditure and decreasing risk. Early stages of exploration are planning and prospecting. The planning
stage covers the selection of commodity, type of deposit, exploration methods, and the seĴing up of an
exploration entity. Prospecting covers activities leading to the selection of an area for detailed ground
work; this is the point at which land is acquired. The subsequent stages involve targeted prospecting and
exploration in order to quantify and qualify the mineral resources. Pre-feasibility study is then
performed for evaluating the commercial viability of the deposit (Adapted from Moon et al., 2006).
The Future of Botswana's Diamond Resources
James AH Campbell
Botswana Resources Infrastructure and Energy Forum ('BRIEF')
Gaborone, Botswana
16-17 May 2022
Introduction to the petroleum system of Niger Delta Province. Geological aspects, small statistical data analysis to evaluate the general reservoir properties, oil chemical features.
CRISTIANO ASCOLANI, PHILIPP MESTERS, JEAN-MARC SÖLDNER.
Ruhr-Universität Bochum, Petroleum Geology I, Summer Semester 2014.
Reservoir analysis based on:
1) AMIGUN, John Olurotimi, and Oluwaseyi Ayokunle ODOLE. "Petrophysical Properties Evaluation for Reservoir Characterisation of SEYI Oil Field (Niger-Delta)." International Journal of Innovation and Applied Studies 3.3 (2013): 765-773.
2) Chiaghanam, O. I., et al. "Reservoir Characterisation Of Konga Field, Onshore Niger Delta, Southern Nigeria." International Journal of Science & Emerging Technologies 3.1 (2012).
3)Aigbedion, I., and S. E. Iyayi. "Formation Evaluation of Oshioka Field Using Geophysical Well Logs." Middle-East Journal of Scientific Research 2.4 (2007): 107-110.
4) Adewoye, O., et al. "Petrophysical and structural analysis of maiti field, Niger Delta, using well logs and 3-D seismic data." Petroleum & Coal 55.4 (2013): 302-310.
5) Ogbe, Ovie Benjamin, Opatola, Olatunji Abraham, Idjerhe Wilson and Ocheli Azuka. "Reservoir Quality Evaluation of Sand Bodies of K-Field, Onshore Niger Delta, Using Wireline Logs". International Journal for Science and Emerging Technologies with Latest Trends” 13.1 (2013): 46-64.
What is an ore?, Ore deposit environments, Formation of Mineral Deposits, Endogenous (Internal) processes, Exogenous (Surficial) processes, Types of Sedimentary Rocks, Mineral Deposits Associated with Sedimentary Process, physical processes of ore deposit formation in the surficial realm, Erosion, weathering , transportation, sorting, Precipitation, Depositional Environments, Deposits formed by Weathering, Deposits formed by Sediment, Resources from the Sedimentary Environments
mineral economics its about the surface mine planning
its also inform about the mineral inventory, mineral ore reserve, classification of ore reserve, basic difference cut of grade, market limiting cut of grade etc.
How can minerals deposits be formed; GEOLOGICAL PROCESSES; Ore Fluids; Ore Forming Processes; Concentrating Processes; Magmatic mineral deposits; Residual mineral deposits ; Placer deposits; Sedimentary mineral deposits; Metamorhogenic mineral deposits; Hydrothermal mineral deposits ; Magmatic Deposits
Cumulate deposits: fractional crystallization processes can concentrate metals (Cr, Fe, PGE, Pt, Ni, Ti, Diamond ))
Pegmatites : late staged crystallization forms pegmatites and many residual elements are concentrated (Li, Ce, Be, Sn, U, Rare Earths (REE), Feldspar, Mica, Gems).
magmatic deposits; Mode of Formation of Magmatic Ores Deposits; Mode of Formation of Orthomagmatic Ores ; Fractional Crystallization (or Crystal fractionation ); Magmatic (or Liquid ) Immiscibility; Simple crystallization without concentration (Dissemination); Segregation of early formed crystals; (Layer Types); Injection of material concentrated elsewhere by differentiation Residual liquid segregation; Residual liquid injection; Immiscible liquid segregation; Immiscible-liquid-injection; Early magmatic deposit; Late magmatic deposit; Types of Magmatic Ore Deposits:Chromite; Fe-Ti (± V) oxides; Ni – Cu – Fe (± Pt) sulfides; Platinum Group Elements (PGEs); REE, and Zr in Carbonatites; Diamond in kimberlites.
Methods and stages of Mineral Exploration: Adaptive Resource Management PlanNgatcha Bryan
Exploration can be divided into a number of interlinked and sequential stages which involve increasing
expenditure and decreasing risk. Early stages of exploration are planning and prospecting. The planning
stage covers the selection of commodity, type of deposit, exploration methods, and the seĴing up of an
exploration entity. Prospecting covers activities leading to the selection of an area for detailed ground
work; this is the point at which land is acquired. The subsequent stages involve targeted prospecting and
exploration in order to quantify and qualify the mineral resources. Pre-feasibility study is then
performed for evaluating the commercial viability of the deposit (Adapted from Moon et al., 2006).
The Future of Botswana's Diamond Resources
James AH Campbell
Botswana Resources Infrastructure and Energy Forum ('BRIEF')
Gaborone, Botswana
16-17 May 2022
Introduction to the petroleum system of Niger Delta Province. Geological aspects, small statistical data analysis to evaluate the general reservoir properties, oil chemical features.
CRISTIANO ASCOLANI, PHILIPP MESTERS, JEAN-MARC SÖLDNER.
Ruhr-Universität Bochum, Petroleum Geology I, Summer Semester 2014.
Reservoir analysis based on:
1) AMIGUN, John Olurotimi, and Oluwaseyi Ayokunle ODOLE. "Petrophysical Properties Evaluation for Reservoir Characterisation of SEYI Oil Field (Niger-Delta)." International Journal of Innovation and Applied Studies 3.3 (2013): 765-773.
2) Chiaghanam, O. I., et al. "Reservoir Characterisation Of Konga Field, Onshore Niger Delta, Southern Nigeria." International Journal of Science & Emerging Technologies 3.1 (2012).
3)Aigbedion, I., and S. E. Iyayi. "Formation Evaluation of Oshioka Field Using Geophysical Well Logs." Middle-East Journal of Scientific Research 2.4 (2007): 107-110.
4) Adewoye, O., et al. "Petrophysical and structural analysis of maiti field, Niger Delta, using well logs and 3-D seismic data." Petroleum & Coal 55.4 (2013): 302-310.
5) Ogbe, Ovie Benjamin, Opatola, Olatunji Abraham, Idjerhe Wilson and Ocheli Azuka. "Reservoir Quality Evaluation of Sand Bodies of K-Field, Onshore Niger Delta, Using Wireline Logs". International Journal for Science and Emerging Technologies with Latest Trends” 13.1 (2013): 46-64.
What is an ore?, Ore deposit environments, Formation of Mineral Deposits, Endogenous (Internal) processes, Exogenous (Surficial) processes, Types of Sedimentary Rocks, Mineral Deposits Associated with Sedimentary Process, physical processes of ore deposit formation in the surficial realm, Erosion, weathering , transportation, sorting, Precipitation, Depositional Environments, Deposits formed by Weathering, Deposits formed by Sediment, Resources from the Sedimentary Environments
mineral economics its about the surface mine planning
its also inform about the mineral inventory, mineral ore reserve, classification of ore reserve, basic difference cut of grade, market limiting cut of grade etc.
REHABILITATION & ECOLOGICAL
RESTORATION R & D FOR MARGINAL &
DEGRADED LANDSCAPES AND SEASCAPES
A Research Compendium
FOR MINING AND VOLCANIC
DEBRIS-LADEN AREAS
The King-King Copper-Gold Project is held in a Mineral Production Sharing Agreement (MPSA#009-92-XI, approved by the government May 27, 1992 and amended December 11, 2002) by The Philippine Government, NADECOR (Nationwide Development Corporation), and Benguet Corporation.
The MPSA grants the parties to the MPSA the exclusive right to explore, develop and exploit minerals within the area comprising the King-King deposit.
The deposit size depicted in Figure 1-1 below is 2.5 square kilometers and the area of the Mineral Property in the MPSA is 15.5 square kilometers (see Figure 4-2). There is a memorandum of understanding (MOU) between NADECOR and St. Augustine Mines Ltd., a subsidiary of Russell Mining and Minerals, Inc. (RMMI), that provides for formation of a Joint Venture (JV) once Benguet Corporation is eliminated from the MPSA.
Under the MOU, RMMI retains the exclusive right to develop the project through itself or an associated entity. Ratel and RMMI have agreed to complete a Share Exchange Agreement wherein Ratel will gain 100 percent control of SAML and RMMI will be compensated in Ratel equity.
Estimation of Environmental Damages from Mining Pollution: The Marinduque Isl...No to mining in Palawan
Mining pollution has historically been a major source of degradation of natural resource systems such as river, coastal, and air (USEPA 1995). For this reason, mining, as an economic activity, is subject to major environmental regulations worldwide, including the Philippines. The Philippine mining sector, under Republic Act 7942 and DENR Administrative Order No. 96-40, is required to set up a Contingent Liability and Rehabilitation Fund (CLRF) for the purpose of providing compensation for damages and rehabilitation for any adverse effect a mining activity may cause to the environment.
Unfortunately, the current information on mining externalities is insufficient to be useful for policy set-ting. This study was undertaken partly to partly fill this information gap, particularly in the development of policy instruments which require information on social costs of mining, and partly to assist in the formulation of guidelines on damage assessment and compensation for the mining sector. This case study of the Estimation of Environmental Damages from Mining Pollution: The Marinduque Island Mining Accident was implemented.
Valuing the benefits of restoring the water regulation
services, in the subtropical thicket biome: a case study in
the ‘Baviaanskloof-Gamtoos watershed’, South-Africa
IJERA (International journal of Engineering Research and Applications) is International online, ... peer reviewed journal. For more detail or submit your article, please visit www.ijera.com
Kenex have been working with Duke Exploration in order to develop exploration targets for base and precious metal mineralisation in Australia. We have been involved throughout all stages of the exploration workflow, details of which are provided below. The Bundarra project represents one of the most successful exploration targeting projects that Kenex has been involved with and promises to be even more exciting in the future!
Synthesis and Characterization of Magnetite-Magnesium Sulphate-Sodium Dodecyl...GIFT KIISI NKIN
Pollution caused by crude oil has become a major problem in Nigeria. It is dangerous to human health, fueling climate change, poisoning soil dwelling organisms amongst others. However, physical and chemical approaches for its remediation are in use but most of these methods are less-effective, costly and even non-environmentally friendly. In this research, magnetite-magnesium sulphate- sodium dodecyl sulphate clay composite that is eco-friendly and less expensive were synthesized, characterized and applied in remediation of crude oil polluted soil. Magnetite was synthesized by co-precipitation of ferric and ferrous Sulphate. Magnesium Sulphate was prepared by recrystallization of Epsom salt and SDS clay was prepared by dissolving 0.6g of SDS in 250ml of distilled water which was further homogenized with calcined clay. Characterization of the composite and constituents were done using the following techniques; XRD, FTIR, XRF and SEM for the determination of mineral structure, functional groups, elemental composition and surface morphology respectively. In remediation, varying concentrations of the composite were added to fixed amount of the polluted soil sample. i.e 0%, 2%, 4%, 6%, 8% and 10% to 10g of soil sample. The remediation was conducted within the period of 7 and 14 days on parameters of interest such as Benzene, Toluene, Ethylbenzene and Zylene (BTEX), Polycyclic Aromatic Hydrocarbons (PAHs), Total Petroleum Hydrocarbons (TPHs) and the soil samples were further, analyzed using GC-MS for the determination of BTEX and PAHs while GC-FID for TPHs before and after treatment with the composite. XRD results showed mixed mineral compounds of Silica, MgSO4, Alumina and Fe3O4 as expected. FTIR results showed prominent bands at 872cm-1 for bending mode of Si-O-Si group in the composite, 1028cm-1 for Si-O-Al group in the SDS clay, 864 cm-1 for bending vibration of SO42- in Magnesium Sulphate and 582 cm-1 for Fe-O group in Magnetite. EDXRF results showed Fe2O3, SiO2, MgO as significant elemental composition in the composite. SO3, MgO, Al2O3 as significant elemental oxides in Magnesium Sulphate, Fe2SO3 in Magnetite and SiO2, Al2O3, CeO2 in SDS clay. The results of SEM micrographs showed apparently porous, platy and irregular sized polycrystallites. BTEX, PAHs and TPHs analysis in 7 and 14 days remediation showed decreased in concentration of pollutants as the concentration of composite increases from 2% to 10%. The efficiency of degradation of BTEX, PAHs and TPHs was found to be higher in 14 days remediation compared with 7 days. Moreover, above 91% was recorded on PAHs and TPHs while 100% was achieved on BTEX. The order of magnitude of degradation by the three constituents of the composite on BTEX, PAHs and TPHs pollutants in the soil sample was SDS clay>MgSO4>Fe3O4. Above all, the efficiency of degradation of BTEX, PAHs, and TPHs increases due to increase in concentration of the composite with respect to time.
The Tampakan Copper-Gold Project and Human Rights Violations in the South Cotabato, Philippines
Summary
The Tampakan Copper-Gold Project in the Philippines threatens the environment and the livelihoods of local populations. The Bla'an indigenous peoples that occupy these ancestral territories oppose the project and are victims of multiple violations of human rights. But Glencore-Xstrata is still insisting on pursiung the project.
26th session of the Human Rights Council 2014
Item 3 Promotion and protection of all human rights, civil, political, economic, social and cultural rights, including the right to development
Joint written statement of the Europe-Third World Centre (CETIM) and Franciscans International
UN symbol: A/HRC/26/NGO/94
Speech by Julian Payne, President, Canadian Chamber of Commerce of the Philip...No to mining in Palawan
Speech by Julian Payne, President, Canadian Chamber of Commerce of the Philippines
On “A Foreign Investor’s View on Mining in the Philippines”
At the Development Academy of the Philippines, Pasig City, on July 10, 2014
MINING
“SECTION 4. Grant of Mineral Agreements Pending New Legislation. No new mineral agreements shall be entered into until a legislation rationalizing existing revenue sharing
schemes and mechanisms shall have taken effect. The DENR may continue to grant and issue Exploration Permits under existing laws, rules and guidelines.” - Executive Order No. 79, July 6, 2012.
The report is based on a desk study and a three-week
field trip to the Philippines, where data was gathered
through qualitative interviews. Interview partners included
affected communities, company representatives, local and
national civil society organizations, as well as government
authorities. By evaluating this data we shed light on the
main human rights issues linked to the Tampakan Project.
The choice of our interview partners reflects our human
rights approach. While our interviewees have both positive
and negative attitudes towards the Tampakan Project, they
do not constitute a representative sample of the population
in the area. Instead, our goal is to make sure that we include those people who have serious concerns with regard to their human rights situation and to analyze their hopes and fears and complement this information with desk research and the views of other stakeholders and experts.
Prior to the start of stock exchange trading on 5 January 2012, Intex issued a stock exchange announcement stating that it had signed a MoU with MCC8 for the development of its nickel project in Mindoro. This agreement could grant MCC8 a “project management contract” (“PMC”) which would mean that MCC8 would take on most of the responsibility for the project finance and development of the field. As consideration for this, MCC8 and its strategic partners would have an option to purchase up to 90% of Mindoro Nickel, in a staged process, for a total of USD 296 million. Intex would retain 10% and would have an option to buy back a further 10% for up to USD 60 million following completion of the project1.
CLIMATE CHANGE CONGRESS
OF THE PHILIPPINES, INC.(CCCP)
POSITION PAPER ON THE PHILEX MINING DISASTER
pp.1-6
Room 1 Bonifacio Hall, UP SOLAIR, Diliman, Quezon City
Phone no. (632) 385-5638 / Email address: climatechangecongress.org
SUMMARY STATEMENT TO THE SENATE COMMITTEES ON THE ENVIRONMENT AND HEALTH, MARCH 19, 2013
By: Christian S. Monsod
Climate Change Congress of the Philippines
pp.1-5
PAB Resolution
IN THE MATTER OF
WATER POLLUTION CONTROL
AND ABATEMENT CASE
DENR-PAB Case No. CAR-00836-12
- versus-
PHILEX MINING CORPORATION,
Respondent.
FOR: Violation of R.A. 9275 and Its
Implementing Rules and Regulations
25 February 2013
With an estimated $1.4 trillion in reserves, Philippine mining potential ranks
fifth in the world, covering an estimated 9 million hectares, but less than
2% has mining permits. After long stagnation, the sector has been coming
back after a 2005 SC decision affirming RA 7942, considered a world-class
legal framework for sustainable development. Minerals development is a
government priority and has great potential for jobs and revenue. Government
has identified over 60 priority PPP projects. Mining can support poor
rural areas through high quality jobs, local tax payments, and community
development. The national government receives substantial royalty and tax
payments. Government revenue from mining increased 800% from 2002 to
PhP10.4 billion in 2007. However, full development of the sector continues
to face significant challenges. Lengthy, tedious approvals for Exploration
Permits (EPs) continue to impede investment. Several LGUs have closed their
provinces to mining. Industry is concerned that the Writ of Kalikasan might
disturb lawful activities. An investor cannot tell easily if land is ancestral land.
Skilled Mines and Geosciences Bureau (MGB) personnel often leave public
service. EO 79 has imposed a moratorium on new mining permits, pending the
passage of a new law on the revenue-sharing scheme between industry
The Fraser Institute Annual Survey of Mining
Companies was sent to approximately 4,100
exploration, development, and other mining-related
companies around the world. Several mining
publications and associations also helped publicize the
survey... The survey, conducted from October 9, 2012,
to January 6, 2013, represents responses from 742 of those
companies. The companies participating in the survey
reported exploration spending of US$6.2 billion
in 2012 and US$5.4 billion in 2011
Application For The Environmental Compliance Certificate (ECC) Of The Tampakan Project
O.P. Case No.12-F-159
DENR Case No. 1966
Paquito N. Ochoa, Jr
Executive Secretary
Philippines
Pollution Adjudication Board fines Philex Mining over Clean Water Act ViolationsNo to mining in Palawan
Pollution Adjudication Board fines Philex Mining over Clean Water Act Violations
On Thursday, January 24, Philex disclosed to the exchange that it received a notice of issuance from the Pollution Adjudication Board (PAB)to cease-and-desist from using its tailings pond at its Padcal mine in Benguet following a mine spill in August 2012.
The new environmental legislation replaces 18 environmental laws with 8 laws and introduces 2 entirely new laws. The purpose of the review was to reduce duplication and improve the quality of regulation, ensure responsible, environmentally-friendly and sustainable development, improve economic efficiency, introduce international standards in environmental auditing and the "polluter pays" principle, increase public participation in environmental decision-making, and secure funds for environmental protection.
The Roman Empire A Historical Colossus.pdfkaushalkr1407
The Roman Empire, a vast and enduring power, stands as one of history's most remarkable civilizations, leaving an indelible imprint on the world. It emerged from the Roman Republic, transitioning into an imperial powerhouse under the leadership of Augustus Caesar in 27 BCE. This transformation marked the beginning of an era defined by unprecedented territorial expansion, architectural marvels, and profound cultural influence.
The empire's roots lie in the city of Rome, founded, according to legend, by Romulus in 753 BCE. Over centuries, Rome evolved from a small settlement to a formidable republic, characterized by a complex political system with elected officials and checks on power. However, internal strife, class conflicts, and military ambitions paved the way for the end of the Republic. Julius Caesar’s dictatorship and subsequent assassination in 44 BCE created a power vacuum, leading to a civil war. Octavian, later Augustus, emerged victorious, heralding the Roman Empire’s birth.
Under Augustus, the empire experienced the Pax Romana, a 200-year period of relative peace and stability. Augustus reformed the military, established efficient administrative systems, and initiated grand construction projects. The empire's borders expanded, encompassing territories from Britain to Egypt and from Spain to the Euphrates. Roman legions, renowned for their discipline and engineering prowess, secured and maintained these vast territories, building roads, fortifications, and cities that facilitated control and integration.
The Roman Empire’s society was hierarchical, with a rigid class system. At the top were the patricians, wealthy elites who held significant political power. Below them were the plebeians, free citizens with limited political influence, and the vast numbers of slaves who formed the backbone of the economy. The family unit was central, governed by the paterfamilias, the male head who held absolute authority.
Culturally, the Romans were eclectic, absorbing and adapting elements from the civilizations they encountered, particularly the Greeks. Roman art, literature, and philosophy reflected this synthesis, creating a rich cultural tapestry. Latin, the Roman language, became the lingua franca of the Western world, influencing numerous modern languages.
Roman architecture and engineering achievements were monumental. They perfected the arch, vault, and dome, constructing enduring structures like the Colosseum, Pantheon, and aqueducts. These engineering marvels not only showcased Roman ingenuity but also served practical purposes, from public entertainment to water supply.
2024.06.01 Introducing a competency framework for languag learning materials ...Sandy Millin
http://sandymillin.wordpress.com/iateflwebinar2024
Published classroom materials form the basis of syllabuses, drive teacher professional development, and have a potentially huge influence on learners, teachers and education systems. All teachers also create their own materials, whether a few sentences on a blackboard, a highly-structured fully-realised online course, or anything in between. Despite this, the knowledge and skills needed to create effective language learning materials are rarely part of teacher training, and are mostly learnt by trial and error.
Knowledge and skills frameworks, generally called competency frameworks, for ELT teachers, trainers and managers have existed for a few years now. However, until I created one for my MA dissertation, there wasn’t one drawing together what we need to know and do to be able to effectively produce language learning materials.
This webinar will introduce you to my framework, highlighting the key competencies I identified from my research. It will also show how anybody involved in language teaching (any language, not just English!), teacher training, managing schools or developing language learning materials can benefit from using the framework.
Read| The latest issue of The Challenger is here! We are thrilled to announce that our school paper has qualified for the NATIONAL SCHOOLS PRESS CONFERENCE (NSPC) 2024. Thank you for your unwavering support and trust. Dive into the stories that made us stand out!
How to Split Bills in the Odoo 17 POS ModuleCeline George
Bills have a main role in point of sale procedure. It will help to track sales, handling payments and giving receipts to customers. Bill splitting also has an important role in POS. For example, If some friends come together for dinner and if they want to divide the bill then it is possible by POS bill splitting. This slide will show how to split bills in odoo 17 POS.
Synthetic Fiber Construction in lab .pptxPavel ( NSTU)
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
This is a presentation by Dada Robert in a Your Skill Boost masterclass organised by the Excellence Foundation for South Sudan (EFSS) on Saturday, the 25th and Sunday, the 26th of May 2024.
He discussed the concept of quality improvement, emphasizing its applicability to various aspects of life, including personal, project, and program improvements. He defined quality as doing the right thing at the right time in the right way to achieve the best possible results and discussed the concept of the "gap" between what we know and what we do, and how this gap represents the areas we need to improve. He explained the scientific approach to quality improvement, which involves systematic performance analysis, testing and learning, and implementing change ideas. He also highlighted the importance of client focus and a team approach to quality improvement.
Palestine last event orientationfvgnh .pptxRaedMohamed3
An EFL lesson about the current events in Palestine. It is intended to be for intermediate students who wish to increase their listening skills through a short lesson in power point.
How to Create Map Views in the Odoo 17 ERPCeline George
The map views are useful for providing a geographical representation of data. They allow users to visualize and analyze the data in a more intuitive manner.
Students, digital devices and success - Andreas Schleicher - 27 May 2024..pptxEduSkills OECD
Andreas Schleicher presents at the OECD webinar ‘Digital devices in schools: detrimental distraction or secret to success?’ on 27 May 2024. The presentation was based on findings from PISA 2022 results and the webinar helped launch the PISA in Focus ‘Managing screen time: How to protect and equip students against distraction’ https://www.oecd-ilibrary.org/education/managing-screen-time_7c225af4-en and the OECD Education Policy Perspective ‘Students, digital devices and success’ can be found here - https://oe.cd/il/5yV
Students, digital devices and success - Andreas Schleicher - 27 May 2024..pptx
Macventures MPSA 016_93_XIII
1. UPDATE ON THE NICKELIFEROUS LATERITE MINERAL RESOURCES
OF MARCVENTURES MINING AND DEVELOPMENT CORPORATION’S
MPSA 016-93-XIII
LOCATED IN THE MUNICIPALITIES OF CANTILAN AND CARRASCAL,
SURIGAO DEL SUR, PHILIPPINES
FOR
MARCVENTURES MINING AND DEVELOPMENT CORPORATION
Unit E, One Luna Place, E. Luna Street,
Butuan City, Philippines
January 2013
Radegundo S. de Luna
Competent Person for Nickel (PMRC No. 071205)
Licensed Geologist (No. 0000218)
2.
3. Update on the Mineral Resources of the MMDC Nickel Project
Marcventures Mining & Development Corporation
Radegundo S. de Luna, Competent Person for Geology
TABLE OF CONTENTS
1. EXECUTIVE SUMMARY 1
2. INTRODUCTION 4
3. TENEMENT AND MINERAL RIGHTS 5
4. GEOGRAPHIC FEATURES 5
4.1 Location and Accessibility 5
4.2 Topography, Physiography and Drainage 6
4.3 Climate 7
4.4 Vegetation 7
5. PREVIOUS WORK 8
6. HISTORY OF PRODUCTION 10
7. GEOLOGIC SETTING 12
7.1 Regional Geology and Tectonic Setting 12
7.2 Local Geology 15
7.2.1 Dinagat Ophiolite Complex 15
7.2.2 Sohoton Greenschist 16
7.2.3 Alipao Andesite 16
7.2.4 Timamana Limestone 16
8. MINERALIZATION 18
9. EXPLORATION 21
10. DRILLING 22
10.1 Drilling Contractors 24
10.2 Drill hole Collar Survey 26
11. SAMPLING METHOD 26
12. SAMPLE PREPARATION, SECURITY AND ANALYSES 28
13. DATA VERIFICATION 30
14. MINERAL RESOURCE ESTIMATE 31
15. INTERPRETATION AND CONCLUSIONS 33
16. RECOMMENDATIONS 34
17. REFERENCES 35
i
4. Update on the Mineral Resources of the MMDC Nickel Project
Marcventures Mining & Development Corporation
Radegundo S. de Luna, Competent Person for Geology
LIST OF TABLES
Table 1: MMDC Mineral Resources as of December 2012 3
Table 2: Technical description of MPSA 016-93-XIII 4
Table 3: Resource estimates of previous exploration works 9
Table 4: MMDC’s production history from 2011 to 2012 11
Table 5: Summary of drilling activities conducted over Cabangahan, Sipangpang and Pili 22
Table 6: List of rigs of CDSI 24
Table 7: Relationship of accepted value and reassay of standard samples 30
Table 8: Summary of Mineral Resource estimate by polygon method 33
Table 9: Comparison of 2010 and 2012 resource estimates 33
LIST OF FIGURES
Figure 1: Location Map of MMDC Tenement Area in Cantilan, Surigao del Sur 4
Figure 2: Road network from Surigao City and Butuan City to MMDC Tenement Area 6
Figure 3: Map showing location of Carac-an River 7
Figure 4: Climate map of the Philippines with relative location of MMDC Tenement Area 8
Figure 5: MMDC Tenement Map showing Cabangahan, Sipangpang and Pili Areas 10
Figure 6: Current Mine site in Cabangahan Area 11
Figure 7: General tectonic map of the Philippines 12
Figure 8: Close-up of the tectonic setting of northern Surigao Peninsula 13
Figure 9: Distribution of ophiolites in the Philippines 13
Figure 10: Updated stratigraphic column of the Northern Pacific Cordillera 15
Figure 11: Geologic map of MMDC Tenement Area 16
Figure 12: Graph of nickel and iron values versus depth 19
Figure 13: Frequency distribution graphs of Nickel and iron values of samples 20
Figure 14: Map showing dominant structures inferred in the vicinity of MMDC area 22
Figure 15: Location map of drill holes in Cabangahan, Sipangpang and Pili 23
Figure 16: Photograph of CDSI drill rig 24
Figure 17: Photograph of Georock drill rig 25
Figure 18: Photograph of portable mechanized auger used by Dr. Arcilla’s Team 25
Figure 19: Photograph of in-house drill rig, YBM 26
Figure 20: Sample of core photograph with label 27
Figure 21: Photograph of MMDC Sample Preparation Facility 28
ii
5. Update on the Mineral Resources of the MMDC Nickel Project
Marcventures Mining & Development Corporation
Radegundo S. de Luna, Competent Person for Geology
Figure 22: Steel plate and electric oven used for sample preparation 28
Figure 23: Crusher and pulverizer used for sample preparation 29
Figure 24: AAS equipment and chemical used for titration 29
Figure 25: Scatter plot for standard samples 30
LIST OF APPENDICES
Appendix 1: Daily Drilling Report, Core Log Form and Sample Submission Form
Appendix 2: Assay results of standard samples
Appendix 3: Sample database used in the resource estimation
iii
6. Update on the Mineral Resources of the MMDC Nickel Project
Marcventures Mining & Development Corporation
Radegundo S. de Luna, Competent Person for Nickel
1. EXECUTIVE SUMMARY
On December 2012, Marcventures Mining and Development Coporation (MMDC) requested the
author to update the Competent Person Report on its mineral resource which was filed on August
2010. The first report was written by Dr. Carlo Arcilla, Competent Person for Geology and current
Director of the National Institute of Geological Sciences. The previous resource estimate of Dr.
Arcilla in 2010 reported a total of 3,867,000 dry metric tonnes of Indicated limonite resource at 1.0%
nickel cut-off, averaging 1.3% nickel and 35.9% iron, and 5,635,000 metric tonnes of Indicated
saprolite resource at 1.0% nickel cut-off, averaging 1.4% nickel, within a 120-hectare portion of the
4,799-hectare tenement area. This report discloses the result of exploration carried out by MMDC
from 2010 to 2012 on its Nickel Project as well as the updated resource estimate.
The tenement area is mostly underlain with serpentinized peridotite and dunite of the Dinagat
Ophiolite. Geological mapping and exploratory drilling showed favourable development of iron-rich
limonite ore north of Carac-an River and the occurrence of nickel-rich saprolite ore was observed
south of the said river.
The MPSA area is divided into three sub-areas, namely: 1) Cabangahan, 2) Sipangpang, and 3) Pili. A
total of 1,289 drill holes with an aggregate depth of 21,266.98 meters have been drilled to date.
Combination of compass and tape traverse, and Global Positioning System (GPS) were used primarily
to locate holes at 50-m, 100-m and 200-m interval. Collar coordinates of drill holes at 25-m interval
were obtained using total station. Assay results of Pili and Sipangpang drill holes indicate presence of
high-iron limonite ore in these areas. Cabangahan samples yielded assay results indicative of high-
nickel saprolite ore overlain by high-iron limonite ore.
Core samples from the field were logged and prepared at MMDC Core House and Sample Preparation
Facility located in Sition Banban, Cantilan. Whole-rock chemical analyses of the core samples were
done by Atomic Absorption Spectroscopy (AAS) at MMDC’s Laboratory also located within the
vicinity. Quality analysis/quality control program includes AAS calibration using in-house laterite
standard samples prepared by titration. Statistical evaluation and graphical presentation of 1,059
standards showed excellent correlation for nickel and iron with R2 = 0.99.
The Resources are classified purely as a function of the drilling density. Resource estimation used in
this report is the polygon method in which the classification guidelines applied are consistent with the
CIM or JORC classification standards, to wit:
1
7. Update on the Mineral Resources of the MMDC Nickel Project
Marcventures Mining & Development Corporation
Radegundo S. de Luna, Competent Person for Nickel
Measured Resources - for limonite, where drilling is at a grid of 50m x 50m or less
- for saprolite, where drilling is at a grid of 25m x 25m or less
Indicated Resource - for limonite, where drilling is at a grid of up to 100m x 100m
- for saprolite, where drilling is at a grid of up to 50m x 50m
Inferred Resource - for limonite and saprolite, where drilling is at a grid of up to 300m x
300m
Cut-off grade for saprolite estimation is ≥1.5% nickel and <20% iron. While for limonite ore, cut-off
grade used was ≥0.7% nickel and ≥20% iron. Total Measured and Indicated Saprolite Resource
with average 1.90% nickel and 11.81% iron is 2,883,000 WMT. For Limonite Ore, total
Measured and Indicated Resource averaging 1.08% nickel and 44.48% iron is 15,991,000
WMT.
Total Inferred Saprolite Resource with average 1.73% nickel and 13.08% iron is 4,490,000
WMT. For Limonite Ore, total Inferred Resource averaging 1.00% nickel and 47.93% iron is
21,960,000 WMT. Details of the Mineral Resource estimation are shown in Table 1.
2
9. Update on the Mineral Resources of the MMDC Nickel Project
Marcventures Mining & Development Corporation
Radegundo S. de Luna, Competent Person for Nickel
2. INTRODUCTION
This technical report was prepared at the request of Mr. Mario G. Vijungco, Chairman and President
of Marcventures Mining and Development Corporation (MMDC), with the purpose of providing an
updated nickeliferrous laterite resource estimate of the MMDC Nickel Project located within the
Municipality of Cantilan and Carrascal in Surigao del Sur (Figure 1).
MMDC Nickel Project
Figure 1. Map showing location of the MMDC Nickel
Project in the Municipality of Cantilan, Province of
Surigao del Sur relative to adjacent provinces.
The author was commissioned by MMDC to complete a review, site visit and technical report on the
mining and exploration activities being undertaken by the company. This technical report, which
complies with the requirements, guidelines and implementing rules and regulation of the Philippine
Mineral Reporting Code (PMRC), relied on the technical reports, opinion and statement of
geologists/consultants of MMDC.
The report also provides detailed summary of the assessment of historical data and results of the
exploration program carried out over the tenement area for the past 2 years after the last competent
person report. This document is compiled from technical reports written by consultants of MMDC,
published technical data and observations made by MMDC geologists. All sources of data used are
herein cited and listed in Section 17.
This technical report is compliant with the implementing rules and regulations of the Philippine
Mineral Reporting Code (PMRC).
4
10. Update on the Mineral Resources of the MMDC Nickel Project
Marcventures Mining & Development Corporation
Radegundo S. de Luna, Competent Person for Nickel
3. TENEMENT AND MINERAL RIGHTS
MMDC Nickel Project is located within Barangays Cabangahan and Panikian in the Municipalities of
Cantilan and Carrascal, respectively. Cantilan and Carrascal are within the Province of Surigao del
Sur. The project is covered by MPSA 016-93-XI. Table 2 shows the geographic coordinates of the
boundary of the tenement area.
Tabel 2. Technical description of MPSA 016-93-XI in Luzon-Mindanao Datum
Corner Longitude Latitude
1 125°52'30" 9°20'00"
2 125°55'00" 9°20'00"
3 125°55'00" 9°19'00"
4 125°54'00" 9°19'00"
5 125°54'00" 9°15'30"
6 125°53'30" 9°15'30"
7 125°53'30" 9°14'00"
8 125°51'00" 9°14'00"
9 125°51'00" 9°15'00"
10 125°51'30" 9°15'00"
11 125°51'30" 9°19'00"
12 125°52'30" 9°19'00"
The project area is within a logging concession that was operated by Ventura Timber Corporation
since 1986. Realizing the potential of the area, Ventura Timber Corporation engaged the services of
Geomin Management Corporation in May 1991 to explore the area for possible mineral deposits and
in July 1991, applied for a Mineral Production Sharing Agreement (MPSA) over 4,799 hectares in
accordance with the transitory provision of the 1987 Mining Law known as Executive Order No. 279
(E.O. 279).
4. GEOGRAPHIC FEATURES
4.1 Location and Accessibility
The tenement area is located approximately 3 kilometers west of Cantilan along the
Surigao City-Tandag National Highway and accessible through newly renovated
logging roads westward from Barangay Panikian. Surigao del Sur is bordered by
Surigao del Norte to the north, Agusan del Norte and Agusan del Sur to the west, and
Davao Oriental to the south.
5
11. Update on the Mineral Resources of the MMDC Nickel Project
Marcventures Mining & Development Corporation
Radegundo S. de Luna, Competent Person for Nickel
Cantilan is accessible from Surigao City by travelling 120 kilometers southward (Figure
2) and from Tandag by land travel for about 60 kilometers northward. Surigao City and
Butuan City can be reached from Manila or Cebu City most conveniently by daily
flights by all major airlines in the country.
Figure 2. Map showing road network from Surigao City and Butuan City to MMDC tenement
area.
4.2 Topography, Physiography and Drainage
The tenement area is located at the north eastern fringe of the Diwata Mountain Range
(also called the Pacific Cordillera), a 300-kilometer stretch of rugged mountains that
extends all the way to Davao. To the west of the Diwata Mountain Range are
topographic low areas, Tubay Valley and Lake Mainit. These areas are bordered to the
west by a 70-kilometer long elevated terrain that runs parallel to the west coast of
Surigao del Norte, the Malimono Ridge.
Within the tenement area, the terrain is generally gently to moderately sloping and
undulating with the exception of some portions in Cabangahan with steep slopes. The
Carac-an River transects the tenement area from west to east (Figure 3). The portion of
the tenement north of the river attain elevations up to 400 meters above sea level while
the portion located south of the river reaches up to 650 meters above sea level. The
6
12. Update on the Mineral Resources of the MMDC Nickel Project
Marcventures Mining & Development Corporation
Radegundo S. de Luna, Competent Person for Nickel
Carac-an River merges with the Taracan River to the south and empties into Lanuza
Bay at the east.
To the northeast and northwest of the MPSA is well-formed karst topography,
indicative of limestone areas. The Eyamjo River appears to be the boundary between
the karst topography and the other mountains.
Figure 3. Map showing the Carac-an River transecting the tenement area. Also shown are the Eyamjo and
Taracan Rivers.
4.3 Climate
Surigao del Sur exhibits TYPE II Climate which has no pronounced dry and wet season
(Figure 4). Maximum rainfall is experienced from November to February and minimum
rainfall from May to April with annual rainfall not exceeding 4,500 millimeters
(Kintanar, 1984).
4.4 Vegetation
Dense growth of primary forest trees (e.g. narra, lauan, apitong, tangile) covers the
mountainous portions of the tenement. Secondary growth plant covers the logged out
portions of the area. Lowlands are used for agricultural purposes and are cultivated with
7
13. Update on the Mineral Resources of the MMDC Nickel Project
Marcventures Mining & Development Corporation
Radegundo S. de Luna, Competent Person for Nickel
rice, corn, coconut and fruit trees. Mangroves are observed to grow along the lower
sections of rivers and coastal areas.
Figure 4. Climate map of the Philippines with relative location of
MMDC tenement area represented by a red star (CORONA, 1920).
5. PREVIOUS WORK
The potential of the tenement area for nickeliferrous laterite was first recognized in the 1950s when
the Mines and Geosciences Bureau (MGB) delineated areas with potential for laterite in the Surigao
Peninsula. Several companies had taken interest in the property including Surigao Nickel Mining and
Industrial Corporation in a joint venture with Marcopper Mining Corporation (1970s); Ventura
Timber Corporation (1990s) who engaged Geomin Management Corporation to explore the area in
1991, and Queensland Nickel Incorporated and Hinatuan Mining Corporation in 1992.
Table 3 shows the previous exploration works and various resource estimates undertaken for MMDC.
8
14. Update on the Mineral Resources of the MMDC Nickel Project
Marcventures Mining & Development Corporation
Radegundo S. de Luna, Competent Person for Nickel
Table 3. Resource estimates of previous exploration works.
Period Proponent Area Auger drill Test pits Rotary drill Results / Resource
Coverage holes holes Estimate
1970 Marcopper Mining 1,300 has. over 1,000 80 MMT of laterite;
Corp / Surigao sampling average 1.2 percent nickel
Nickel Mining and points and 0.1 percent cobalt
Industrial Corp
1991 Geomin Area 1, Area 2 45 holes with 200-m grid 0.1 to 13% heavy mineral
Management Corp aggregate spacing fraction, high anomaly in
meterage of central northern part of
275 meters at the area; conducted
300-m grid geological mapping,
petrographic and
mineralogical studies
1992 Hinatuan Mining Area 2 (25 25 holes with 826kg of limonite at 0.9%
has.) depth ranging Ni cut-off, averaging
from 7 to 24 1.16% Ni and 50.7% Fe;
meters 2,044kg of saprolite at
1.6% Ni cut-off, averaging
2.15% Ni
1994 Ventura Timber 1,500 has. 1,000 drill 111 test pits estimated potential
holes ranigng from resource of 100MMT at
6.3 to 14.3 1.5% Ni, 24% Fe and
meters 0.05% Co
2000 QNI Philippines 400 has. 412 drill holes
2009 Arcilla Area 2 (117 170 holes 3.8 MMT of Indicated
has.) Limonite at 1% Ni cut-off,
averaging 1.3% Ni and
35.9% Fe; 5.6 MMT of
Indicated Saprolite at 1%
Ni cut-off, averaging 1.4%
Ni
Initially, auger drilling and test-pitting was conducted to explore the area. In 1992, Hinatuan Mining
Corporation used portable vibro drills to explore for saprolite and drilled at several random locations.
The drilling program delineated a 120-hectare mineralized zone in Cabangahan, which was then
referred to as ‘Area 2’. The result of this drilling became the basis for the first PMRC-compliant
report of Arcilla in 2010. Figure 5 shows the location of Areas 1, 2, and 3 (or Pili, Cabangahan and
Sipangpang, respectively). A systematic rotary in-fill drilling program was then conducted over
Cabangahan, Sipangpang and Pili from 2010 to 2012. The second-phase exploration yielded 1,289
drill holes with a total meterage of 21,266.98 meters. A total of 21,247 samples were collected which
constitute the basis for the updated resource report of 2012.
9
15. Update on the Mineral Resources of the MMDC Nickel Project
Marcventures Mining & Development Corporation
Radegundo S. de Luna, Competent Person for Nickel
Figure 5. MMDC MPSA 016-93-XIII tenement map showing Cabangahan, Sipangpang and Pili areas.
6. HISTORY OF PRODUCTION
MMDC has started its mining operation from the last quarter of 2010 which includes clearing,
grabbing and stockpiling of limonite and saprolite ore from Area 2 (Cabangahan) which is covered by
an ECC (120 has.). By the third quarter of 2011, MMDC was able to start shipping out limonite and
saprolite ore up to the present. MMDC has already shipped nearly 1,300,000 WMT of limonite and
saprolite. This indicates extensive mineralization in the MPSA. Nearly 30% of the shipped ore is
saprolite with an average grade of 1.8% Ni. The rest are limonite with an average grade of 1.01% Ni
and 48.44% Fe. Table 4 summarizes the shipment details of MMDC from 2011 to 2012.
10
16. Update on the Mineral Resources of the MMDC Nickel Project
Marcventures Mining & Development Corporation
Radegundo S. de Luna, Competent Person for Nickel
Table 4. MMDC's Production History from 2011 to 2012.
Quarter, Year Limonite Saprolite
Grade Grade
Tonnage (WMT) (% Fe) Tonnage (WMT) (% Ni)
Q3, 2011 55,603.00 1.8
Q3, 2011 55,529.01 48
Q3, 2011 54,578.00 1.8
Q3, 2011 51,554.73 48
Q4, 2011 55,860.64 48
Q4, 2011 51,008.50 48
Q4, 2011 55,481.60 48
Q4, 2011 55,913.36 48
Q4, 2011 57,220.16 48
Q4, 2011 54,805.41 48
Q4, 2011 53,805.00 1.8
Q4, 2011 26,738.59 48
Subtotal 2011 464,112.00 48 163,986.00 1.8
Q2, 2012 55,517.00 48
Q2, 2012 49,560.00 1.8
Q2, 2012 50,201.00 49
Q2, 2012 52,100.04 49
Q2, 2012 52,215.00 49
Q3, 2012 48,000.00 49
Q3, 2012 55,000.35 1.8
Q3, 2012 54,999.99 49
Q3, 2012 55,000.00 49
Q4, 2012 53,145.52 1.8
Q4, 2012 37,193.91 49
Q4, 2012 55,000.01 49
Q4, 2012 20,000.00 1.8
Subtotal 2012 460,226.95 48.89 177,705.87 1.8
TOTAL 924,338.95 48.44 341,691.87 1.8
Figure 6. Photograph of the current mine site in Cababangahan area where high-nickel saprolite resource has been
delineated.
11
17. Update on the Mineral Resources of the MMDC Nickel Project
Marcventures Mining & Development Corporation
Radegundo S. de Luna, Competent Person for Nickel
7. GEOLOGIC SETTING
7.1 Regional Geology and Tectonic Setting
The principal tectonic element of the Philippine archipelago is the elongate Philippine
Mobile Belt (Rangin, 1991) which is bound to the east and west by two major
subduction zone systems, and bisected along its north-south axis by the Philippine Fault
(Figure 7).
Figure 7. General tectonic map of the Philippines with relative
location of the tenement area (orange star).
The Philippine Fault and its associated faults play an important role in the
mineralization of the Surigao District. The trace of the Philippine Fault in Surigao is
marked by the highly rectilinear NNW-SSE trending Tubay Valler, Lake Mainit and
Maniayao Volcano (Figure 8). These structures were formed by a pull-apart mechanism
associated with left-stepping left-lateral strike slip fault.
12
18. Update on the Mineral Resources of the MMDC Nickel Project
Marcventures Mining & Development Corporation
Radegundo S. de Luna, Competent Person for Nickel
Figure 8. Close-up of the tectonic setting of northern Surigao Peninsula.
Intense physical and chemical weathering of ultramafic rocks in ophiolite suites
produces nickel-bearing laterite. The distribution of ophiolite belts in the Philippines is
shown in Figure 9.
Figure 9. Map showing distribution
of ophiolites in the Philippines and
relative location of MMDC
tenement area (yellow star).
13
19. Update on the Mineral Resources of the MMDC Nickel Project
Marcventures Mining & Development Corporation
Radegundo S. de Luna, Competent Person for Nickel
The basement rocks in the district are basalts and slabs of the Dinagat Ophiolite and
metamorphic rocks of the Cretaceous Sohoton Greenschist. The ophiolite consists of
amphibolite, peridotite, pyroxenite, gabbro and dunite. They are regionally
serpentinized and can be found along Malimono Ridge and Northern Pacific Cordillera.
These rocks were dated to be Cretaceous to Paleocene (MGB, 2010; Rohrlach, 2005).
Overlying the basement rocks are calcareous conglomerates of the Upper Eocene
Madanlog Formation in Surigao, and its equivalent terrigenous and calcareous
sediments of the Nabanog Formation in Agusan. These formations are in turn overlain
by the Late Oligocene to Early Miocene Bacuag Formation. The Bacuag Formation
consists of basaltic flow and breccia, limestone, limestone conglomerate, wackes,
siltstone, and muddy limestone.
Intruding the Bacuag Formation and other older formations is the Asiga Diorite named
after the river where most outcrops were to be found. The Early to Late Miocene Alipao
Andesite also intrudes the Bacuag Formation in the vicinities of Alipao and Siana Mine
Pits. The Bacuag Formation is overlain by the Lower to Middle Miocene Mabuhay
Formation (Motherlode Turbidite by UNDP, 1987). The Middle Miocene Timamana
Limestone inconformably overlies the Bacuag and Mabuhay Formations. This consists
of massive coralline limestone (MGB, 2010).
Andesitic pyroclastic eruption and lava flows formed the Tugunan Formation
(Mabuhay Clastics by UNDP, 1987) during the Pliocene. Associated magmatism
brought about the epithermal mineralization of the Surigao District (Rohrlach, 2005),
and produced the andesites reported as the Andesite Group by Santos et.al. (1962) and
as the Andesite Series by Santos-Ynigo (1944). These were separated by MGB (2010)
into the Early to Late Pleistocene Ipil Andesite, Late Pliocene Bad-as Dacite and the
Pleistocene Maniayao Andesite. Pleistocene deposits in the region are the Mainit
Formation, Hinatigan Formation and Placer Conglomerate (MGB, 2010), all of which
are dominated by conglomerates and sandstones. Figure 10 shows the updated
stratigraphic column of the Northern Pacific Cordillera by MGB, 2010.
14
20. Update on the Mineral Resources of the MMDC Nickel Project
Marcventures Mining & Development Corporation
Radegundo S. de Luna, Competent Person for Nickel
Figure 10. Updated stratigraphic column of the Northern Pacific Cordillera
(MGB, 2010).
7.2 Local Geology
In summer of 2012, students from the National Institute of Geological Sciences (NIGS)
conducted geological and structural mapping within the MPSA area under the
supervision of Dr. Carlo Arcilla. Figure 11 shows the location and inferred boundaries
of the different lithologic units as mapped by the group.
7.2.1 Dinagat Ophiolite Complex
The Dinagat Ophiolite Complex is composed of amphibolite, residual
peridotite, cumulate peridotite, massive and layered gabbro, sheeted dike
complex and pillow basalts of Cretaceous age.
Serpentinized peridotite, pyroxenite and dunite are best exposed in landslide
area, quarry site and road cuts along networks of logging roads in Barangay
15
21. Update on the Mineral Resources of the MMDC Nickel Project
Marcventures Mining & Development Corporation
Radegundo S. de Luna, Competent Person for Nickel
Panikian. The rock units were also observed in Barangays Sipangpang and
Cabangahan located south of the MPSA area.
Section along Line A-A’
Figure 11. Geologic map produced by the UP-NIGS Team after conducting geologic mapping and sampling on April 2012. MMDC
tenement is outlined by red.
Fresh rock samples are greenish black to black. Dunite is predominantly
composed of olive green-colored grains of olivine. Pyroxene occurs as fine to
coarse black crystals in peridotite and pyroxenite. Bronzite is recognized by
their bronze color and pronounced two-direction cleavage. It is scattered
randomly with the pyroxene. All rock samples are serpentinized at varying
degrees. Serpentine minerals occur in platy and fibrous varieties with whitish
green to green platy varieties occuring as fracture-fillings along joints and
fault planes.
7.2.2 Sohoton Greenschist
The Sohoton Greenschist is composed of greenschist, phyllite, and low-grade
metamorphic sedimentary and volcanic rocks with marble interbeds. Phyllite
16
22. Update on the Mineral Resources of the MMDC Nickel Project
Marcventures Mining & Development Corporation
Radegundo S. de Luna, Competent Person for Nickel
and low grade metamorphic rocks are distributed over the northwestern part
of Cabangahan in the vicinity of Sipangpang River.
Metavolcanics and metasedimentary rocks have lower degree of
metamorphism than Phyllites such that the protolith can still be inferred from
the sample. Phyllites, on the other hand, show higher degree of
metamorphism such that traces of the protolith are poorly expressed.
Foliation and sheen produced by mica minerals are more pronounced.
7.2.3 Alipao Andesite
The Alipao Andesite intrudes all older units and assigned to a Middle
Miocene age by UNDP (1987). Outcrops are found in the northwestern part
of the Cabangahan area, south of the metavolcanics and phyllite area. Minor
andesite dikes and outcrops are found along the Carac-an River in Lubo near
the metavolcanics zone. Rock samples are gray to greenish in color with no
observed manifestation of metamorphism. Texture is aphanitic to porphyritic
with long amphibole phenocrysts in fine-grained matrix.
7.2.4 Timamana Limestone
The Middle Miocene Timamana Limestone is composed of massive coralline
limestone and may contain oolites, coral and shell fragments. Well-bedded
calcarenite, calcisiltite and gritty sandstone are found at the base of the unit.
The limestone unit caps the ultramafic unit with outcrops found in Sitio
Bagong Pili and Purok 5, Barangay Panikian, located in the northeastern part
of the study area. Outcrops are generally cream to gray in color. Contact
between the ultramafics and the limestone unit was observed in Parang near
Sitio Bagong Pili. Hand samples are cream to gray in color and compose of
sand to mud-sized calcareous sediments. Fossiliferous limestones contain
foraminifera. Some samples are crystalline with coarse calcite crystals.
17
23. Update on the Mineral Resources of the MMDC Nickel Project
Marcventures Mining & Development Corporation
Radegundo S. de Luna, Competent Person for Nickel
8. MINERALIZATION
Nickel/Iron deposits in the MMDC tenement area are in the form of laterite (limonite ore) and
saprolite derived from the physical and chemical weathering in place of the underlying ultramafic
rocks, the bulk of rock suites of the Dinagat Ophiolite Complex. Laterites are accumulation of the
residual product of the upper oxidizing zone in the weathering profile. It is essentially made up of clay
and other oxide minerals rich in iron. The lower reducing zone directly underlying the laterite is the
saprolite, a secondary nickel enriched zone made up of rocks and clay in silicate form. They are
surface and near surface deposits localized by topographic controls and geologic structures.
The typical laterite deposit at Cabangahan mining pit shows distinct color variation with depth, to wit:
1) a pale yellowish and light brown upper to near surface laterite, 2) a middle section of a yellowish
laterite, and 3) a multi-colored bottom laterite. The color described is the gross effect of several colors
as viewed in its totality. However, a closer examination of the laterite would reveal various shades of
red, brown, orange, yellow and gray. They appear as alternating bands, streaks, oolites, lenses and
mottled colors. Occasional chromite, magnetite, manganese specks are noted.
Underlying the laterite is saprolitic layer with grey to greenish brown color. It has low plasticity and
consists of partly decomposed rocks, softly clayey rock, boulders rimmed by decomposed materials
with fairly unweathered core and clast of bedrock. This is a zone characterized by rapid changes in
physical properties and chemical composition. The saprolite layer may reach up to more than 8 meters
thickness in some portion of the tenement area. Garnierite was also observed in the saprolite layer. It
occurs as irregular fracture filling, lenses and paper thin coating in joints and layering structures.
Results of X-ray Diffraction (XRD) of a garnierite sample taken from the tenement area showed that
the garnierite consists mostly of lizardite (magnesium-dominant serpentine), remnants of forsterite
(magnesium-dominant olivine), augite (calcic magnesium-iron clinopyroxene), and traces of
magnetite. Geothite was also found as an alteration product of olivine.
Nickel is relatively mobile over a wide range of environment. Its fixation in the laterite zone is in
oxide form. Nickel is absorbed and included in the goethite and other oxide form. Its values generally
increase with depth and attain maximum values at the saprolite layer. Its concentration in the laterite
is not high compared to that in the saprolite. Iron content is highest in the laterite zone and remains so
in the laterite column with small variation but decreases rapidly from the bottom of the laterite to the
saprolite zone (Figure 12).
18
24. Update on the Mineral Resources of the MMDC Nickel Project
Marcventures Mining & Development Corporation
Radegundo S. de Luna, Competent Person for Nickel
Figure 12. Graph of nickel (green) and iron
(brown) values with respect to depth. Drill hole
ID N1850-E2625 located west of the present mine
site.
Nickel and iron grade distributions shown in Figure 13 show that Cabangahan Area contains the most
saprolite samples. This is manifested by higher number of iron values around 5 to 15 percent in
Cabangahan distribution graph than at around 45 to 55 percent. Likewise, abundance of nickel values
from 1.5 to 3 percent also denote high number of saprolite samples.
The iron grade distribution shows the typical trend observed for most laterite deposits in the country.
However, trend of nickel grade distribution observed so far in other laterite deposits in the country
show normal or bell-shaped distribution with the peak at medium grades or around 1 percent. In the
distribution graph above, there is an unusual peak at low nickel values of 0.2 to 0.5 percent. This does
not indicate predominant low grades in the area, but instead indicates an unusually high number of
bedrock samples drilled.
19
25. Update on the Mineral Resources of the MMDC Nickel Project
Marcventures Mining & Development Corporation
Radegundo S. de Luna, Competent Person for Nickel
Cabangahan Area Cabangahan Area
1200 4000
1000
3000
Frequency
Frequency
800
600 2000
400
1000
200
0 0
0.00
0.30
0.60
0.90
1.20
1.50
1.80
2.10
2.40
2.70
3.00
22.5
37.5
52.5
0
15
30
45
60
7.5
% Nickel % Iron
Sipangpang Area Sipangpang Area
1200 1500
1000
Frequency
Frequency
800 1000
600
400 500
200
0 0
1.50
0.00
0.30
0.60
0.90
1.20
1.80
2.10
2.40
22.5
37.5
52.5
0
7.5
15
30
45
60
% Nickel % Iron
Pili Area Pili Area
150 600
500
Frequency
Frequency
100 400
300
50 200
100
0 0
0.00
0.30
0.60
0.90
1.20
1.50
1.80
2.10
2.40
22.5
37.5
52.5
0
7.5
15
30
45
60
% Nickel % Iron
Figure 13. Frequency distribution graphs of Nickel and Iron values of samples from Cabangahan, Sipangpang and Pili Areas.
20
26. Update on the Mineral Resources of the MMDC Nickel Project
Marcventures Mining & Development Corporation
Radegundo S. de Luna, Competent Person for Nickel
9. EXPLORATION
The MMDC Nickel Project denominated as MPSA 016-93-XIII was registered on July 1993.
Community information and education campaigns commenced and have continued since that time.
All exploration work on the MMDC Nickel Project was carried out under the supervision of Mr.
Mario G. Vijungco, Chairman and President of Marcventures Mining and Development Corporation.
Assessment and review of related literature and available data on geology of the area was carried out
initially.
Detailed geologic mapping on a local scale was conducted by Dr. Arcilla’s Team in April 2012. The
team consists of 58 students supervised by 10 faculty members, 2 of which are licensed geologists,
and 2 representatives from MMDC. The activity included geologic mapping using 10,000-scale base
map and sampling within the tenement area. The main purpose of the mapping activity is to identify
different rock types and structures including fractures, joints and faults. Trend of structures were
measured using brunton compass and plotted on map using coordinates derived from Global
Positioning System (GPS) devices. Displacements were inferred by observing offset in the structures.
Stress orientation was determined by plotting the structures on rose diagrams; thence, the prevailing
stress regime in the area was determined.
A northeast-southwest lineament that extends from the General Islands toward Panikian which
appears to end southwest of Cabangahan was identified as the most prominent structure within the
vicinity of the tenement area (Figure 14). The structure is inferred to be the contact between the
limestone and ultramafics. Similar trending joints were found in the limestones while northwest-
southeast joints were found to be more dominant in ultramafic rocks.
While the sense of movement of several faults was difficult to ascertain due to lack of reference
bedding planes, high degree of weathering of outcrop, and relatively thick gouge; analysis of a left-
lateral fault in an outcrop south of Cabangahan together with faults with available rake data suggests a
primary compressive stress trending along the NW-SE.
21
27. Update on the Mineral Resources of the MMDC Nickel Project
Marcventures Mining & Development Corporation
Radegundo S. de Luna, Competent Person for Nickel
Figure 14. Map showing dominant structures inferred in the vicinity of MMDC tenement area (Arcilla et.al., 2012).
10. DRILLING
Based on previous drilling by Hinatuan Mining Corp. and other exploration activities, MMDC
conducted extensive diamond drilling on the whole tenement area from 2010 to the last quarter of
2012 to further increase its mineral resource. Three (3) drilling contractors utilizing at least 10 drill
machines each, and 5 in-house YBM drill machines were used.
For the current resource estimate update, a total of 1,289 vertical holes have been completed covering
Cabangahan, Sipangpang, and Pili (Figure 15). Holes within Cabangahan area are located on 25-m to
100-m grid, in Sipangpang on 50-m to 100-m grid, and in Pili on 100-m to 200-m grid. Total
meterage is 21,266.98 with an average depth of 16.50 meters per hole and maximum of 40.0 meters.
Table 5. Summary of driling activities conducted over Cabangahan, Sipangpang and Pili Areas.
Depth Samples
Area No. of holes Total Min Max Average Total %Ni range %Fe range
Cabangahan 1,009 17,095.88 3 34 16.56 17,080 0.01-3.16 0.01-57.48
Sipangpang 231 3,091.30 4 28 13.38 3,088 0.01-2.73 3.35-55.27
Pili 49 1,079.80 7 40 22.04 1,079 0.01-1.80 0.42-53.82
TOTAL 1,289 21,266.98 21,247
22
28. Update on the Mineral Resources of the MMDC Nickel Project
Marcventures Mining & Development Corporation
Radegundo S. de Luna, Competent Person for Nickel
Figure 15. Location map showing 1,289 drill holes completed from 2010 to 2012. The blue outline within Cabangahan indicates the 120-
hectare ECC Area where the current mining operations is located.
23
29. Update on the Mineral Resources of the MMDC Nickel Project
Marcventures Mining & Development Corporation
Radegundo S. de Luna, Competent Person for Nickel
10.1 Drilling Contractors
CONSTRUCTION AND DRILLING SPECIALIST, INC.
Construction and Drilling Specialist, Inc. (CDSI) was contracted to undertake coring
using a minimum of ten (10) units of man-portable drilling machines complete with HQ
or NQ triple-tube core barrels to ensure high percentage of core recovery. CDSI was
able to complete 66 holes in Cabangahan, 49 holes in Pili and 32 holes in Sipangpang
from June to September 2011. The table below lists the drill rigs used by CDSI during
the activity.
Table 6. List of rigs used by CDSI.
Rigs used by
CDSI Area
GM-50 Cabangahan, Pili, Sipangpang
GT80-1 Pili, Sipangpang
GT80-2 Sipangpang
LY-38 Pili
TAS-3E Cabangahan, Pili, Sipangpang
TOHO-1 Cabangahan, Pili, Sipangpang
TOHO-2 Cabangahan, Pili, Sipangpang
TS50 Cabangahan, Pili, Sipangpang
TS50-1 Cabangahan, Sipangpang
TS50-2 Cabangahan, Sipangpang
YBM Cabangahan, Pili
YBM-1 Cabangahan, Pili
YBM-2 Cabangahan, Pili
Figure 16. (LEFT) Photograph of drill hole location taken before drilling. (RIGHT) Sample of CDSI drill rig employed
by the contractor.
24
30. Update on the Mineral Resources of the MMDC Nickel Project
Marcventures Mining & Development Corporation
Radegundo S. de Luna, Competent Person for Nickel
GEOROCK CONSTRUCTION AND DEVELOPMENT CORPORATION
A total of 215 drill holes were completed by Georock Construction and Development
Corporation from July to November of 2011 covering Sipangpang area. The contractor
employed 10 units of Koken Mechanical Drill Machine, YBM Hydraulic Drilling
Machine, Kano Hydraulic Drilling Machine producing NQ size (45mm) core.
Figure 17. (LEFT) Sample of drill rig used by the contractor, Georock, in Sipangpang area specifically drill hole ID Sip-
42. (RIGHT) Close-up photo of Georock drill rig.
DR. C. ARCILLA DRILLING TEAM
Dr. Arcilla conducted in-fill drilling within the Sipangpang and Cabangahan Area from
April to November 2012. A total of 351 drill holes were completed during that period
with a total of 5,420.00 meters. His team used 22 units of portable mechanized auger
drill with NQ-sized single tube core barrel.
Figure 18. Photograph of portable mechanized
auger drill used by Dr. Arcilla’s Drilling Team.
25
31. Update on the Mineral Resources of the MMDC Nickel Project
Marcventures Mining & Development Corporation
Radegundo S. de Luna, Competent Person for Nickel
MMDC IN-HOUSE DRILLING TEAM
The in-house drilling team of MMDC conducted the in-fill drilling at 25-m interval
over the saprolite-rich area within Cabangahan and completed 630 holes over the area.
The team utilized 5 YBM drill units with BQ size single tube core barrel (Figure 19).
Figure 19. Photograph of YBM drill
machines used by MMDC for in-fill
drilling.
10.2 Drill hole Collar Survey
Collar data of holes at 50-m, 100-m and 200-m grid were gathered using a Geographic
Positioning System (GPS) device.
Drill hole collar data, including position and elevation, of holes spaced at 25-m grid
was surveyed by MMDC surveyors using 2 units of Topcon total station (GPT-3107N
and GTS-100N). Two bench marks were established by the surveyors to be used as tie
point. Reference system used is PRS 92 or the Luzon-Mindanao datum.
11. SAMPLING METHOD
Initial Drilling and Sampling Procedures was set up by MMDC personnel and was adapted from
2007. The protocols were re-evaluated and improvements were implemented by October 2012. The
procedures for core handling, logging and sampling applied by MMDC are briefly described below.
It is standard procedure that a representative from MMDC, either geologist or core checker, is present
on every drill rig during coring operation. This is to record drilling activities such as core recovery,
26
32. Update on the Mineral Resources of the MMDC Nickel Project
Marcventures Mining & Development Corporation
Radegundo S. de Luna, Competent Person for Nickel
drill run, type of material recovered including problems encountered during drilling. These data are
recorded into the Daily Drilling Report (Appendix 1). Once a core box is filled, it is sealed with a
wooden board then secured with rubber packing band. A specific vehicle is assigned to transfer core
box from the field to the core house located within MMDC camp site in Sitio Banban.
Upon arrival at the core house, core box filled with samples are received by the Core House Lead
Man and recorded in a logbook. Meterage of core samples is checked against core blocks and the
Daily Drilling Report. After checking, core boxes are photographed with the proper drill hole ID,
project area, meterage and box number written on a white board label placed on top of the core box
(Figure 20).
Figure 20. Sample core photograph with drill hole ID, project area, meterage and box
number indicated in the white board label.
Core logging is carefully done in the core house by MMDC geologist. The geologist is guided by
different codes for laterite horizon classification, weathering scale, boulder size and color which are
readily available in the Core Log Sheet (Appendix 1).
Once core logging is done, the geologist determines the sample interval and records it in the Core Log
Sheet (Appendix 1) to be used as reference by the Samplers. Sampling is done at a nominal interval of
one meter down the hole regardless of laterite horizon boundaries. The core house sampler uses
spatula and sample pick to split the sample along the length and collect the samples from the left side.
27
33. Update on the Mineral Resources of the MMDC Nickel Project
Marcventures Mining & Development Corporation
Radegundo S. de Luna, Competent Person for Nickel
Samples are placed into pre-labelled plastic sample bags and delivered to the Sample Preparation
Facility of MMDC which is supervised by the company chemist.
Figure 21. Photograph of MMDC Sample Preparation Facility in Sitio Banban. Sacks in front of the
facility contains the samples that were submitted.
12. SAMPLE PREPARATION, SECURITY AND ANALYSES
MMDC QA/QC procedures were also diligently followed in the sample preparation and security
procedures. Split core samples from the core house are received by the Sample Prep Men and are
verified from the Sample Submission Form (Appendix 1) submitted by the Core House Lead Man.
Figure 22. (LEFT) Samples are manually crushed on steel plate installed on the floor of the Sample Preparation
Facility. (RIGHT) Metal trays with samples are place into the electric oven to be heated at 105°C for 8 hours.
28
34. Update on the Mineral Resources of the MMDC Nickel Project
Marcventures Mining & Development Corporation
Radegundo S. de Luna, Competent Person for Nickel
The sample is manually crushed on a steel plate using sledge hammer then placed on metal trays. To
dry the samples, metal trays containing the samples are placed into the electric oven at 105°C for 8
hours or more if needed.
Figure 23. (LEFT) Crusher used to reduce the size of the sample after drying. (RIGHT) Pulverizer used to
further reduce the size of the sample after splitting.
The sample is then passed through a crusher to crush “the lumps” that were formed while drying the
sample. A riffle splitter is used to divide the sample into two parts. One part is retained and stored as
coarse reject that can be used for check analysis in the future. The other part is pulverized to 150 mesh
where about 1 gram sample is taken to be analysed.
Analyses of core samples are performed by the MMDC Laboratory using Atomic Absorption
Spectrometry (AAS).
Figure 24. (LEFT) Atomic Absorption Spectrometry (AAS) equipment installed at the MMDC Laboratory in Sitio
Banban. (RIGHT) Chemicals used for titration.
29
35. Update on the Mineral Resources of the MMDC Nickel Project
Marcventures Mining & Development Corporation
Radegundo S. de Luna, Competent Person for Nickel
13. DATA VERIFICATION
The author has observed and verified the datasets provided by MMDC against original field sheets
and official assay results. Core trays were visually inspected against core logs and selected drill hole
collars were inspected in the field and cross checked against survey plans and topographic data.
MMDC In-house laboratory regularly insert nickel standards for every 10 samples. A total of 1,059
standards, representing 5% of the total 21,247 core samples, were inserted. In-house standards were
established through series of analysis by four (4) chemists using AAS and Titration methods. All
assay results fall within the allowable range of ±0.03% for nickel and ±0.30% for iron were
considered. Standards used for the whole drilling course to date range from 0.25 to 2.40% nickel.
Figure 23 shows excellent correlation for nickel and iron of the standards that were analysed with R 2
being 0.99.
% Ni standard sample (accepted vs reassay) % Fe standard samples (accepted vs reassay)
3.00 60.00
2.50 50.00
2.00 40.00
Reassay
Reassay
1.50 30.00
1.00 20.00
y = 0.9992x - 3E-05 y = 0.9975x + 0.0493
0.50 R² = 0.9989 10.00
R² = 0.9997
0.00 0.00
0.00 1.00 2.00 3.00 0.00 10.00 20.00 30.00 40.00 50.00 60.00
accepted value Accepted value
Figure 25. Scatter plot of % nickel and iron values of the standard samples used for QA/QC showing excellent correlation,
R2 = 0.99 both for nickel and iron. Standards are inserted every 10 samples.
Table 7. Relationship of accepted value and reassay of standard samples.
Ni % Fe %
Relative Percent Error -0.19 0.13
Accepted value = Assay result 208 19
Accepted value < Assay result 382 479
Accepted value > Assay result 438 550
The Relative Percent Errors shown in Table 7 are below 1%, showing consistent and high precision
repeatability. A negative RE% value indicates that the accepted value is higher than the reassay.
Therefore, standards suggest that the analyses of MMDC Laboratory are suitably precise. Further
proof of the accuracy and precision of MMDC Laboratory and sampling practices is that purchasers of
30
36. Update on the Mineral Resources of the MMDC Nickel Project
Marcventures Mining & Development Corporation
Radegundo S. de Luna, Competent Person for Nickel
the nickel ore conduct their own determination of grade and tonnage of materials transported in each
shipment and the values determined by the purchasers agree with MMDC’s data.
14. MINERAL RESOURCE ESTIMATION
The data set in Microsoft Excel format used as basis for the resource estimation was provided by
MMDC in December 2012. The spreadsheets contained collar, survey and assay data which consists
of drill hole ID, northing and easting, from and to depth of each sample, and nickel and iron
percentage of each samples.
All holes were drilled vertically. No downhole survey was carried out which is acceptable due to
relatively short length of drill holes.
Polygon method was used to estimate the mineral resource of MMDC’s MPSA 016-93-XIII. In this
method, each drill hole is assigned a polygon that represents the extent of the area of influence of the
drill hole. The assumption is that everywhere within the polygon, the thickness and grade of the
resource material is uniform and more or less the same to the resource material of the drill hole
enclosed by the polygon.
The area of influence of each drill hole is based on the halfway rule, which states that the influence of
a drill hole sample extends until halfway to other samples laterally adjacent to it. For saprolite, the
Measured Mineral Resource was estimated using data of drill holes at 25-m interval and the Indicated
Mineral Resource at 50-m interval while Inferred Mineral Resource was estimated for holes at 100-m
and 200-m interval. In case of limonite, Measured Mineral Resource was estimated using data of drill
holes at 25-m and 50-m interval. Indicated Mineral Resource was estimated using data of drill holes at
100-m interval while Inferred Mineral Resource was estimated for holes at 200-m interval.
The volume of each block is the product of the area of influence and the combined thickness of
samples that fall within the set cut-off grades of each ore type. To determine the Wet Total Tonnage,
the total in-situ volume is multiplied to a swell factor of 1.35 and 1.37 for soft and hard materials,
respectively, and to the bulk density of 1.11 and 1.46, again for soft and hard materials, respectively.
The soft materials contain about 38% moisture while hard materials contain about 15% moisture.
Cut-off used for saprolite ore estimation is ≥1.5% nickel and <20% iron while for limonite ore, cut-off
grade used was ≥0.7% nickel and ≥20% iron. A total of 2,882,000 WMT (wet metric tonnes) of
31
37. Update on the Mineral Resources of the MMDC Nickel Project
Marcventures Mining & Development Corporation
Radegundo S. de Luna, Competent Person for Nickel
Measured and Indicated Saprolite Resource with average 1.9% nickel and 11.88% iron was
calculated. For limonite ore, Measured and Indicated Resource was estimated at 15,992,000 WMT
averaging 1.08 percent nickel and 44.48 percent iron. Details of sample data used in the resource
estimation are shown in Appendix 3.
Table 1. MINERAL RESOURCES As of December 2012 (Inclusive of Mineral Reserves)
Tonnes Tonnes
Area Class Type (Wet) (Dry) %Ni %Fe Ni Tonnes
Cabangahan Measured Saprolite 2,400,000 1,580,000 1.91 11.77 30,152
Limonite 2,634,000 1,637,000 1.24 42.36 20,367
Total/Ave. 5,034,000 3,217,000 1.57 27.33 50,519
Indicated Saprolite 482,000 347,000 1.88 12.00 6,524
Limonite 12,512,000 7,758,000 1.06 44.61 82,299
Total/Ave. 12,994,000 8,105,000 1.47 28.31 88,822
Measured and Indicated 18,028,000 11,322,000 1.52 27.82 139,341
Inferred Saprolite 4,483,000 2,909,000 1.73 13.08 50,343
Limonite 4,699,000 2,914,000 1.08 46.64 31,561
Total/Ave. 9,182,000 5,823,000 1.41 29.86 81,905
Sipangpang Indicated Saprolite 0 0 0.00 0.00 0
Limonite 839,000 520,000 0.94 49.18 4,874
Total/Ave. 839,000 520,000 0.94 49.18 4,874
Inferred Saprolite 0 0 0.00 0.00 0
Limonite 9,770,000 6,058,000 1.01 47.49 60,958
Total/Ave. 9,770,000 6,058,000 1.01 47.49 60,958
Pili Inferred Saprolite 0 0 0.00 0.00 0
Limonite 7,493,000 6,058,000 0.95 49.35 57,661
Total/Ave. 7,493,000 6,058,000 0.95 49.35 57,661
Total Measured Saprolite 2,401,000 1,580,000 1.91 11.77 30,152
Limonite 2,640,000 1,637,000 1.24 42.36 20,367
Total/Ave. 5,041,000 3,217,000 1.58 27.07 50,519
Indicated Saprolite 482,000 347,000 1.88 12.00 6,524
Limonite 13,352,000 8,278,000 1.05 44.90 87,173
Total/Ave. 13,834,000 8,625,000 1.47 28.45 93,696
Measured and Indicated 18,875,000 11,842,000 1.52 27.76 144,215
Inferred Saprolite 4,484,000 2,909,000 1.73 13.08 50,343
Limonite 21,962,000 15,029,000 1.00 47.93 150,181
Total/Ave. 26,446,000 17,938,000 1.37 30.58 200,524
32
38. Update on the Mineral Resources of the MMDC Nickel Project
Marcventures Mining & Development Corporation
Radegundo S. de Luna, Competent Person for Nickel
15. INTERPRETATION AND CONCLUSIONS
Widespread occurrence of serpentinized peridotite and dunite comprise the lithology in the MMDC
tenement area. High-iron limonite ore and high-nickel saprolite are present over most of the tenement
area.
The Cabangahan Area (Figure 13) hosts high-nickel saprolite and has been mined from 2011 up to
present. Additional drilling outside the present mine site has delineated additional high-iron limonite
ore. The summary of the mineral resource estimation results is presented in Table 8.
Table 8. Summary of Mineral Resource estimate by polygon method.
Million Million Nickel
Class Type WMT DMT %Ni %Fe Tonnes
Measured Saprolite I 2.06 1.30 1.97 12.03 26,577
Saprolite II 0.34 0.23 1.55 10.25 3,575
Limonite Low Iron 1.09 0.68 1.56 32.37 10,581
Limonite High Iron 1.55 0.96 1.02 49.39 9,785
Indicated Saprolite I 0.40 0.28 1.95 12.25 5,543
Saprolite II 0.08 0.06 1.55 10.88 980
Limonite Low Iron 3.00 1.86 1.51 29.50 27,982
Limonite High Iron 10.35 6.42 0.92 49.36 59,191
TOTAL MEASURED + INDICATED Saprolite I 2.46 1.58 1.96 12.14 32,120
Saprolite II 0.42 0.29 1.55 10.57 4,555
Limonite Low Iron 4.09 2.54 1.54 30.94 38,563
Limonite High Iron 11.90 7.38 0.97 49.38 68,976
Inferred Saprolite I 3.20 2.05 1.81 13.24 37,185
Saprolite II 1.29 0.86 1.54 12.70 13,158
Limonite Low Iron 1.93 1.19 1.56 32.05 18,631
Limonite High Iron 20.03 13.83 0.95 49.46 131,549
MEASURED + INDICATED + INFERRED Saprolite I 5.66 3.63 1.89 12.69 69,305
Saprolite II 1.71 1.15 1.55 11.63 17,713
Limonite Low Iron 6.02 3.73 1.55 31.49 57,194
Limonite High Iron 31.93 21.21 0.96 49.42 200,525
Table 9. Comparison of R. de Luna’s 2012 resource estimates with Dr. Arcilla's 2010 resource estimates.
Area covered Saprolite Limonite
Author, Year (hectares) No. of holes Class Million MT % Ni Million MT % Ni
Arcilla, 2010 120 170 Indicated 5.64 1.40 3.87 1.30
de Luna, 2012 1,889 1,289 Measured + Indicated 2.88 1.90 15.99 1.08
Table 9 shows the comparison between the 2010 mineral resource estimate by Dr. Arcilla and 2012
mineral resource estimate by R. de Luna. There is notably a great increase in the high-iron limonite
ore resource from 2010 with 3.87 Million metric tonnes (1.3% Ni and 35.9% Fe), to 15.99 Million
33
39. Update on the Mineral Resources of the MMDC Nickel Project
Marcventures Mining & Development Corporation
Radegundo S. de Luna, Competent Person for Nickel
wet metric tonnes (1.08% Ni, 44.48% Fe) in 2012. This is primarily due to the extensive drilling that
was done outside the 120-hectare ECC area.
The decrease in the saprolite resource is due to higher nickel cut-off used during the 2012 estimation.
Another factor is the reduction of saprolite resource due to production. Some of the saprolite resource
from the 2010 estimation has already been mined and shipped out. The potential for obtaining
substantially more saprolite ore tonnage is shown by the 4.48 Million WMT of Inferred Resource.
More detailed drilling would increase the saprolite resource tonnage considerably.
16. RECOMMENDATIONS
Additional exploration and drilling is recommended over the Pili and Sipangpang Areas to upgrade
the resources from Indicated and Inferred to Measured and Indicated. This will increase the shippable
high-iron limonite ore tonnage.
In-fill drilling is needed in Cabangahan where high-nickel saprolite has been delineated to upgrade the
4.48 Million WMT Inferred saprolite resource into Measured and Indicated resource.
Additional QA/QC method needs to be implemented to also check for accuracy of MMDC Laboratory
given that standard samples only check for analytical precision. Other method that can check for
accuracy is insertion of Certified Reference Materials and inter-laboratory check analysis. Insertion of
geological Blank Sample should also be considered to check and monitor contamination during
sample preparation. Coarse and Pulp Duplicate Samples will check for error in sample size reduction
and error in analyses.
34