Load indicator
•
0 likes•105 views
• Hi-speed A/D conversion rate of 3000 times/sec (resolution: 24 bit.. • The high-performance filtering functions by using both analogue and digital technology • Cover wide range of applications: fast response time and high accuracy • it can be also used for highly accurate weighing system by adjusting A/D conversion rate.
Report
Share
Report
Share
Download to read offline
Recommended
Advanced motion controls dr100ee25a20nac
The DR100EE25A20NAC is a digital PWM servo drive designed to control brushed and brushless motors. It operates in torque, velocity, or position mode using space vector modulation for high efficiency. It has configurable digital and analog inputs and outputs, and connects via RS-232/485 for setup and control. Key features include regenerative braking, extensive protection, and a Windows software interface for commissioning.
Advanced motion controls dr100ee30a40nac
The DR100EE series is a fully digital PWM servo drive designed to control brushed and brushless motors. It features space vector modulation, configurable digital and analog I/O, and RS-232/485 communication for setup. The drive operates in torque, velocity or position mode and includes protections for overvoltage, undervoltage, and overcurrent.
Advanced motion controls dr100ee15a40nac
The DR100EE-NAC digital servo drive is designed to control brushed and brushless motors in torque, velocity or position mode using space vector modulation. It has fully programmable digital and analog I/O along with RS-232/485 interface for configuration. The drive operates motors with up to 15A peak current while dissipating low power due to its digital design and SVM technique.
Advanced motion controls dr100ee15a40lac
The DR100EE15A40LAC is a digital PWM servo drive designed to control brushed and brushless motors in torque, velocity, or position mode using space vector modulation. It features fully programmable control loops and I/O along with protective circuits. Setup and control is done through an RS-232/485 interface and Windows software.
Advanced motion controls dr100ee60a40nac
The DR100EE digital servo drive is designed to control brushed and brushless motors. It operates in torque, velocity, or position mode using space vector modulation for high efficiency. The drive has configurable digital and analog inputs and outputs, and connects to motors and accessories via screw terminals. Setup and control is done through an RS-232/485 interface using Windows software.
Advanced motion controls dr100ee60a40lac
The DR100EE60A40LAC is a digital servo drive that can operate in torque, velocity, or position mode. It features space vector modulation, PID control loops, configurable I/O, and protection against overvoltage, undervoltage, overcurrent and overtemperature. It interfaces with motors and external devices through multiple analog and digital inputs and outputs.
Advanced motion controls dr100ee15a40ldc
The DR100EE-LDC Series digital servo drives are fully digital PWM drives that operate in torque, velocity, or position mode using space vector modulation. They feature programmable digital and analog inputs and outputs for interfacing, and are configured via RS-232/485 and Windows software. The drives control brushed or brushless motors and include protections such as over-voltage, under-voltage, over-current, and over-temperature cutoffs.
Advanced motion controls dr100ee30a40ldc
The DR100EE series is a digital PWM servo drive designed to control brushed and brushless motors. It employs space vector modulation and operates in torque, velocity, or position mode. The drive has dedicated digital and analog inputs and outputs and uses RS-232/485 communication for configuration and networked operation. It provides motor commutation and feedback connection and includes protection against over-voltage, under-voltage, and over-current.
Recommended
Advanced motion controls dr100ee25a20nac
The DR100EE25A20NAC is a digital PWM servo drive designed to control brushed and brushless motors. It operates in torque, velocity, or position mode using space vector modulation for high efficiency. It has configurable digital and analog inputs and outputs, and connects via RS-232/485 for setup and control. Key features include regenerative braking, extensive protection, and a Windows software interface for commissioning.
Advanced motion controls dr100ee30a40nac
The DR100EE series is a fully digital PWM servo drive designed to control brushed and brushless motors. It features space vector modulation, configurable digital and analog I/O, and RS-232/485 communication for setup. The drive operates in torque, velocity or position mode and includes protections for overvoltage, undervoltage, and overcurrent.
Advanced motion controls dr100ee15a40nac
The DR100EE-NAC digital servo drive is designed to control brushed and brushless motors in torque, velocity or position mode using space vector modulation. It has fully programmable digital and analog I/O along with RS-232/485 interface for configuration. The drive operates motors with up to 15A peak current while dissipating low power due to its digital design and SVM technique.
Advanced motion controls dr100ee15a40lac
The DR100EE15A40LAC is a digital PWM servo drive designed to control brushed and brushless motors in torque, velocity, or position mode using space vector modulation. It features fully programmable control loops and I/O along with protective circuits. Setup and control is done through an RS-232/485 interface and Windows software.
Advanced motion controls dr100ee60a40nac
The DR100EE digital servo drive is designed to control brushed and brushless motors. It operates in torque, velocity, or position mode using space vector modulation for high efficiency. The drive has configurable digital and analog inputs and outputs, and connects to motors and accessories via screw terminals. Setup and control is done through an RS-232/485 interface using Windows software.
Advanced motion controls dr100ee60a40lac
The DR100EE60A40LAC is a digital servo drive that can operate in torque, velocity, or position mode. It features space vector modulation, PID control loops, configurable I/O, and protection against overvoltage, undervoltage, overcurrent and overtemperature. It interfaces with motors and external devices through multiple analog and digital inputs and outputs.
Advanced motion controls dr100ee15a40ldc
The DR100EE-LDC Series digital servo drives are fully digital PWM drives that operate in torque, velocity, or position mode using space vector modulation. They feature programmable digital and analog inputs and outputs for interfacing, and are configured via RS-232/485 and Windows software. The drives control brushed or brushless motors and include protections such as over-voltage, under-voltage, over-current, and over-temperature cutoffs.
Advanced motion controls dr100ee30a40ldc
The DR100EE series is a digital PWM servo drive designed to control brushed and brushless motors. It employs space vector modulation and operates in torque, velocity, or position mode. The drive has dedicated digital and analog inputs and outputs and uses RS-232/485 communication for configuration and networked operation. It provides motor commutation and feedback connection and includes protection against over-voltage, under-voltage, and over-current.
Advanced motion controls dr100ee100a40ndc
The DR100EE digital servo drive is designed to control brushed and brushless motors. It features space vector modulation, PID control loops, configurable I/O, and RS-232/485 communication. The drive operates in torque, velocity or position mode and includes protection against overvoltage, undervoltage, overcurrent and overtemperature. It has removable connectors for power, motor feedback, I/O and communications.
Advanced motion controls dr100ee60a40ndc
The DR100EE digital servo drive is designed to control brushed and brushless motors. It uses space vector modulation and features torque, velocity, and position control modes. The drive has configurable digital and analog inputs and outputs and is programmed via an RS232/485 interface and Windows software.
Advanced motion controls dr100ee40a8bdc
The DR100EE40A8BDC is a digital servo drive that controls motors in torque, velocity, or position mode using space vector modulation. It has extensive I/O including digital and analog inputs and outputs. Setup and configuration is done through a Windows software over an RS232/485 interface.
Advanced motion controls dr100ee30a40ndc
The DR100EE Series is a fully digital PWM servo drive designed to control brushed and brushless motors. It features space vector modulation, torque, velocity, and position control modes. The drive has programmable digital and analog inputs and outputs and uses an RS232/485 interface for configuration and networking. It is designed for small size, low cost, and ease of use.
Advanced motion controls dr100ee15a20bdc
The DR100EE series are fully digital servo drives that operate in torque, velocity, or position mode using space vector modulation. They feature programmable digital and analog inputs/outputs for motor control and interfacing. Setup and configuration is done through a Windows-based software with a graphical interface via a single RS232/485 communication port.
Advanced motion controls dr100ee20a8bdc qd1
The DR100EE Series is a digital PWM servo drive designed to control brushed and brushless motors. It employs space vector modulation for high bus voltage utilization and low heat dissipation. The drive operates in torque, velocity, or position mode and features programmable digital and analog I/O for interfacing. It is configured through a Windows software and has RS-232/485 communication for setup and networking. The drive provides motor control, feedback processing, and protection in a small package.
Advanced motion controls dr100ee20a8bdc
The DR100EE Series digital servo drives are fully digital PWM drives designed to control brushed and brushless servomotors. They operate in torque, velocity, or position mode using space vector modulation for high bus voltage utilization. The drives feature configurable digital and analog inputs and outputs for interfacing, and are set up using Windows-based software over an RS232/485 interface.
Advanced motion controls dr100ee16a8bdc
The DR100EE Series is a fully digital PWM servo drive designed to control brushed and brushless motors. It operates in torque, velocity, or position mode using space vector modulation for high bus voltage utilization. The drive features programmable digital and analog inputs/outputs, RS-232/485 interface, and Windows-based setup software. It provides motor control as well as I/O interfacing for external devices and controllers.
Advanced motion controls dr101ee25a20nac
The DR101EE Series is a digital PWM servo drive designed to control brushed and brushless motors. It operates in torque, velocity, or position mode using space vector modulation for high efficiency. The drive features fully programmable digital and analog inputs and outputs, as well as RS-232/485 communication for configuration and control. It is designed for small size and ease of use in motion control applications.
Advanced motion controls dr101ee15a40nac
The DR101EE15A40NAC is a digital servo drive that controls brushed and brushless motors in torque, velocity, or position mode using space vector modulation. It has fully programmable digital and analog inputs and outputs, and features a graphical setup software, non-volatile parameter storage, and extensive protection.
Advanced motion controls dr101ee30a40nac
The DR101EE Series digital servo drives are fully digital devices that control brushed and brushless motors in torque, velocity, or position mode using space vector modulation. The drives feature programmable digital and analog inputs and outputs, integrated motor commutation sensing, and configurable operation through a Windows software interface.
Advanced motion controls dr101ee15a40lac
The DR101EE15A40LAC is a digital servo drive that controls brushed and brushless motors with space vector modulation. It operates in torque, velocity, or position mode and features programmable digital and analog inputs/outputs. Setup and configuration is done through a Windows software over an isolated RS232/485 interface. The drive provides extensive motor and motion control along with built-in protections.
Advanced motion controls dq111se25a20nac
The DQ111SE25A20NAC is a fully digital servo drive for brushed and brushless motors. It features space vector modulation, a 20kHz digital current loop, sine/cosine encoder feedback, and SynqNet network interface for configuration. It provides motor control along with dedicated digital and analog inputs/outputs.
Advanced motion controls dr101ee30a80lac
The DR101EE30A80LAC is a digital servo drive that controls motors in torque, velocity, or position mode using space vector modulation. It features fully digital control loops with programmable gains, isolated I/O interfaces, and integrated protection. The drive operates 3-phase motors up to 30A continuous and connects through removable screw terminals for power, logic, and I/O.
Advanced motion controls dr101ee30a40ndc
The DR101EE30A40NDC is a digital servo drive that controls brushed and brushless motors using space vector modulation. It operates in torque, velocity, or position mode and features programmable I/O, analog inputs and outputs, and a Windows-based setup software. The drive provides motor commutation and feedback, configurable protection features, and networked operation via an isolated RS232/485 interface.
Advanced motion controls dr101ee15a40ldc
The DR101EE15A40LDC is a digital servo drive that controls brushed and brushless motors in torque, velocity, or position mode using space vector modulation. It features fully configurable digital and analog inputs and outputs, an RS232/485 interface, and extensive built-in protections. The drive operates motors from 60 to 400VDC and up to 15A continuous current while measuring feedback using encoders or Hall sensors.
Advanced motion controls dq111se25a20nac h
The DQ111SE-H Series is a fully digital servo drive for brushed and brushless motors. It features space vector modulation, a 20kHz digital current loop, sine/cosine encoder interface, hall sensor or encoder commutation, and SynqNet network interface. The drive provides motor control along with dedicated digital and analog inputs and outputs.
Advanced motion controls dq111se15a40nac
The DQ111SE15A40NAC is a fully digital servo drive with space vector modulation and vector control. It features a SynqNet motion control network interface, programmable digital and analog inputs/outputs, and protection against over-voltage, under-voltage, and over-current. Configuration is done through a Windows-based software via the SynqNet interface.
Advanced motion controls dq111se30a40nac
The DQ111SE30A40NAC is a digital servo drive that controls brushed and brushless motors. It features space vector modulation, programmable gains, encoder feedback support, I/O, and a SynqNet interface for motion control networking. The drive provides motor control, I/O, parameter storage, and protection in a compact size.
Advanced motion controls dq111se15a40nac h
The DQ111SE-H series digital servo drive is designed to control brushed and brushless motors. It features fully digital control using space vector modulation for high efficiency. The drive includes interfaces for motor feedback such as encoders, inputs and outputs for control, and a SynqNet interface for digital networking. Commissioning and setup are done through Windows software connected via SynqNet.
Applied motion products servo products datasheet
The document discusses servo drive products from Applied Motion, including three drive series (SV7, SVAC3, BLuAC5), common features across the drives, and control options. It provides details on specific drives and motors, including specifications, dimensions, torque curves, and available communications and I/O options. Electromate is listed as the seller and service provider.
Advanced motion controls dpcantr 015b200
The DigiFlex® PerformanceTM Servo Drive DPCANTR-015B200 is a digital servo drive designed to drive brushed and brushless servomotors in torque, velocity, or position mode. It features a CANopen interface for networking and RS-232 interface for configuration. The drive supports various command sources and feedback types, and includes programmable digital and analog inputs/outputs to interface with external devices. It is compliant with various safety and EMC standards.
More Related Content
What's hot
Advanced motion controls dr100ee100a40ndc
The DR100EE digital servo drive is designed to control brushed and brushless motors. It features space vector modulation, PID control loops, configurable I/O, and RS-232/485 communication. The drive operates in torque, velocity or position mode and includes protection against overvoltage, undervoltage, overcurrent and overtemperature. It has removable connectors for power, motor feedback, I/O and communications.
Advanced motion controls dr100ee60a40ndc
The DR100EE digital servo drive is designed to control brushed and brushless motors. It uses space vector modulation and features torque, velocity, and position control modes. The drive has configurable digital and analog inputs and outputs and is programmed via an RS232/485 interface and Windows software.
Advanced motion controls dr100ee40a8bdc
The DR100EE40A8BDC is a digital servo drive that controls motors in torque, velocity, or position mode using space vector modulation. It has extensive I/O including digital and analog inputs and outputs. Setup and configuration is done through a Windows software over an RS232/485 interface.
Advanced motion controls dr100ee30a40ndc
The DR100EE Series is a fully digital PWM servo drive designed to control brushed and brushless motors. It features space vector modulation, torque, velocity, and position control modes. The drive has programmable digital and analog inputs and outputs and uses an RS232/485 interface for configuration and networking. It is designed for small size, low cost, and ease of use.
Advanced motion controls dr100ee15a20bdc
The DR100EE series are fully digital servo drives that operate in torque, velocity, or position mode using space vector modulation. They feature programmable digital and analog inputs/outputs for motor control and interfacing. Setup and configuration is done through a Windows-based software with a graphical interface via a single RS232/485 communication port.
Advanced motion controls dr100ee20a8bdc qd1
The DR100EE Series is a digital PWM servo drive designed to control brushed and brushless motors. It employs space vector modulation for high bus voltage utilization and low heat dissipation. The drive operates in torque, velocity, or position mode and features programmable digital and analog I/O for interfacing. It is configured through a Windows software and has RS-232/485 communication for setup and networking. The drive provides motor control, feedback processing, and protection in a small package.
Advanced motion controls dr100ee20a8bdc
The DR100EE Series digital servo drives are fully digital PWM drives designed to control brushed and brushless servomotors. They operate in torque, velocity, or position mode using space vector modulation for high bus voltage utilization. The drives feature configurable digital and analog inputs and outputs for interfacing, and are set up using Windows-based software over an RS232/485 interface.
Advanced motion controls dr100ee16a8bdc
The DR100EE Series is a fully digital PWM servo drive designed to control brushed and brushless motors. It operates in torque, velocity, or position mode using space vector modulation for high bus voltage utilization. The drive features programmable digital and analog inputs/outputs, RS-232/485 interface, and Windows-based setup software. It provides motor control as well as I/O interfacing for external devices and controllers.
Advanced motion controls dr101ee25a20nac
The DR101EE Series is a digital PWM servo drive designed to control brushed and brushless motors. It operates in torque, velocity, or position mode using space vector modulation for high efficiency. The drive features fully programmable digital and analog inputs and outputs, as well as RS-232/485 communication for configuration and control. It is designed for small size and ease of use in motion control applications.
Advanced motion controls dr101ee15a40nac
The DR101EE15A40NAC is a digital servo drive that controls brushed and brushless motors in torque, velocity, or position mode using space vector modulation. It has fully programmable digital and analog inputs and outputs, and features a graphical setup software, non-volatile parameter storage, and extensive protection.
Advanced motion controls dr101ee30a40nac
The DR101EE Series digital servo drives are fully digital devices that control brushed and brushless motors in torque, velocity, or position mode using space vector modulation. The drives feature programmable digital and analog inputs and outputs, integrated motor commutation sensing, and configurable operation through a Windows software interface.
Advanced motion controls dr101ee15a40lac
The DR101EE15A40LAC is a digital servo drive that controls brushed and brushless motors with space vector modulation. It operates in torque, velocity, or position mode and features programmable digital and analog inputs/outputs. Setup and configuration is done through a Windows software over an isolated RS232/485 interface. The drive provides extensive motor and motion control along with built-in protections.
Advanced motion controls dq111se25a20nac
The DQ111SE25A20NAC is a fully digital servo drive for brushed and brushless motors. It features space vector modulation, a 20kHz digital current loop, sine/cosine encoder feedback, and SynqNet network interface for configuration. It provides motor control along with dedicated digital and analog inputs/outputs.
Advanced motion controls dr101ee30a80lac
The DR101EE30A80LAC is a digital servo drive that controls motors in torque, velocity, or position mode using space vector modulation. It features fully digital control loops with programmable gains, isolated I/O interfaces, and integrated protection. The drive operates 3-phase motors up to 30A continuous and connects through removable screw terminals for power, logic, and I/O.
Advanced motion controls dr101ee30a40ndc
The DR101EE30A40NDC is a digital servo drive that controls brushed and brushless motors using space vector modulation. It operates in torque, velocity, or position mode and features programmable I/O, analog inputs and outputs, and a Windows-based setup software. The drive provides motor commutation and feedback, configurable protection features, and networked operation via an isolated RS232/485 interface.
Advanced motion controls dr101ee15a40ldc
The DR101EE15A40LDC is a digital servo drive that controls brushed and brushless motors in torque, velocity, or position mode using space vector modulation. It features fully configurable digital and analog inputs and outputs, an RS232/485 interface, and extensive built-in protections. The drive operates motors from 60 to 400VDC and up to 15A continuous current while measuring feedback using encoders or Hall sensors.
Advanced motion controls dq111se25a20nac h
The DQ111SE-H Series is a fully digital servo drive for brushed and brushless motors. It features space vector modulation, a 20kHz digital current loop, sine/cosine encoder interface, hall sensor or encoder commutation, and SynqNet network interface. The drive provides motor control along with dedicated digital and analog inputs and outputs.
Advanced motion controls dq111se15a40nac
The DQ111SE15A40NAC is a fully digital servo drive with space vector modulation and vector control. It features a SynqNet motion control network interface, programmable digital and analog inputs/outputs, and protection against over-voltage, under-voltage, and over-current. Configuration is done through a Windows-based software via the SynqNet interface.
Advanced motion controls dq111se30a40nac
The DQ111SE30A40NAC is a digital servo drive that controls brushed and brushless motors. It features space vector modulation, programmable gains, encoder feedback support, I/O, and a SynqNet interface for motion control networking. The drive provides motor control, I/O, parameter storage, and protection in a compact size.
Advanced motion controls dq111se15a40nac h
The DQ111SE-H series digital servo drive is designed to control brushed and brushless motors. It features fully digital control using space vector modulation for high efficiency. The drive includes interfaces for motor feedback such as encoders, inputs and outputs for control, and a SynqNet interface for digital networking. Commissioning and setup are done through Windows software connected via SynqNet.
What's hot (20)
Similar to Load indicator
Applied motion products servo products datasheet
The document discusses servo drive products from Applied Motion, including three drive series (SV7, SVAC3, BLuAC5), common features across the drives, and control options. It provides details on specific drives and motors, including specifications, dimensions, torque curves, and available communications and I/O options. Electromate is listed as the seller and service provider.
Advanced motion controls dpcantr 015b200
The DigiFlex® PerformanceTM Servo Drive DPCANTR-015B200 is a digital servo drive designed to drive brushed and brushless servomotors in torque, velocity, or position mode. It features a CANopen interface for networking and RS-232 interface for configuration. The drive supports various command sources and feedback types, and includes programmable digital and analog inputs/outputs to interface with external devices. It is compliant with various safety and EMC standards.
Advanced motion controls dpcants 060b080
This document provides specifications for the DigiFlex® PerformanceTM Servo Drive DPCANTS-060B080. It can drive brushed and brushless servomotors in torque, velocity, or position mode. Key features include a peak current of 60A, CANopen and RS-232 interfaces, and support for various feedback and command sources. It complies with safety and EMC standards and has programmable I/O for interfacing with external devices.
Advanced motion controls dpcantr 020b080
The DigiFlex® PerformanceTM Servo Drive DPCANTR-020B080 is a digital servo drive designed to drive brushed and brushless servomotors in torque, velocity, or position mode. It features a CANopen interface for networking and RS-232 interface for configuration. The drive supports various command sources and feedback types, and includes programmable digital and analog inputs/outputs. It is compliant with various safety and EMC standards and measures 132.5 x 89.5 x 35.9 mm.
Advanced motion controls dpcants 040b080
This document provides specifications for the DigiFlex® PerformanceTM Servo Drive DPCANTS-040B080. It can drive brushed and brushless servomotors in torque, velocity, or position mode. It features a CANopen interface, RS-232 interface, programmable I/O, and is compliant with various safety standards including CE, cUL, and RoHS. It has a peak current of 40A, continuous current of 20A, and supply voltage range of 20-80VDC.
Advanced motion controls dpcants 020b080
The DigiFlex® PerformanceTM Servo Drive is a digital servo drive designed to drive brushed and brushless motors in torque, velocity, or position mode. It features a CANopen interface for networking, configurable I/O, and is compliant with various safety standards including CE, cUL, and RoHS. The drive provides up to 20A peak current, has configurable parameters and modes of operation, and is designed for compact size and high power density.
Advanced motion controls dpcantr 025b200
This servo drive operates in torque, velocity, or position mode using space vector modulation. It features a CANopen interface, configurable I/O, and supports various motor and feedback types. The drive can deliver up to 25A peak current and is compliant with various safety and EMC standards.
Advanced motion controls dpranir 030a800
The DigiFlex® PerformanceTM Servo Drive DPRANIR-030A800 is a digital servo drive designed to drive brushed and brushless servomotors in torque, velocity, or position mode. It employs Space Vector Modulation technology for high efficiency and features configurable inputs/outputs, communication interfaces, and approval for CE and RoHS compliance. The drive provides 30A peak current output from a 200-480VAC, 3-phase power supply.
Advanced motion controls zdcr300ee12a8ldc
The document describes the ZDCR300EE12A8LDC digital servo drive. It has a peak current of 12A and operates from 20-80VDC. The drive controls brushed and brushless motors in torque, velocity or position mode using space vector modulation. It has inputs and outputs for interfacing and communication via RS232 and CANopen.
Advanced motion controls dpqnnie 100a400
The document describes the DigiFlex® PerformanceTM Servo Drive DPQNNIE-100A400. It is a digital servo drive designed to drive brushed and brushless servomotors in torque, velocity, or position mode. It features a SynqNet interface for networking, RS-232 interface for configuration, 100A peak current rating, and various I/O including analog and digital inputs and outputs. It complies with safety and EMC standards including UL, CE, and RoHS.
Advanced motion controls dpcanir 030a400
This servo drive features 30A peak current and 15A continuous current. It has CANopen and RS-232 interfaces and supports various motor and feedback types. It provides 4 analog inputs, 1 analog output, 10 digital inputs, and 4 digital outputs for interfacing. It operates in multiple modes including profile, cyclic, and over the network. Agency approvals include UL, cUL, CE, and RoHS.
Advanced motion controls dpcants 025b200
This document provides information on the DigiFlex® PerformanceTM Servo Drive DPCANTS-025B200. It is a digital servo drive designed to drive brushed and brushless servomotors in torque, velocity, or position mode. It features a CANopen interface for networking, programmable I/O, and is compliant with various safety standards including CE, UL, and RoHS. The drive can provide up to 25A of peak current and 12.5A of continuous current from a 20-190VDC power supply.
Advanced motion controls dzcante 010l200
The DigiFlex® PerformanceTM Servo Drive DZCANTE-010L200 is a fully digital servo drive designed to drive brushed and brushless servomotors. It operates in torque, velocity, or position mode and employs Space Vector Modulation for higher efficiency. The drive features configurable digital and analog inputs and outputs and supports various feedback and command sources over CANopen or RS-232 interfaces.
Advanced motion controls dpcants 015b200
The DigiFlex® PerformanceTM servo drive is designed to drive brushed and brushless servomotors in torque, velocity, or position mode using space vector modulation. It has a CANopen interface for networking and configurable digital and analog inputs/outputs. The drive operates on a 40-190VDC supply and can provide up to 15A peak current or 7.5A continuous current to motors.
Advanced motion controls dzralte 010l200
The DigiFlex® PerformanceTM Servo Drive DZRALTE-010L200 is a fully digital servo drive designed to drive brushed and brushless servomotors from a compact form factor. It operates in torque, velocity, or position mode using Space Vector Modulation for higher efficiency. The drive features configurable inputs and outputs, RS-232 and RS-485 interfaces, and stores parameters in non-volatile memory. It is compliant with various safety and EMC standards.
Pml1000
The PML-1000 is an AC line powered panel meter for measuring LVDT/RVDT sensors. It features a large 5-digit LED display, 0-10VDC and 4-20mA outputs, optional RS422/485 communications, and easy calibration. The meter provides functions like minimum, maximum, average readings and is compatible with various Measurement Specialties sensors.
Advanced motion controls dpcantr 060b080
This document provides information about the DigiFlex® PerformanceTM Servo Drive DPCANTR-060B080. It is a digital servo drive designed to drive brushed and brushless motors in torque, velocity, or position mode. It features a CANopen interface for networking and RS-232 interface for configuration. The drive has programmable digital and analog inputs and outputs and supports various command and feedback types.
Advanced motion controls dzralte 025l200
The DigiFlex® PerformanceTM Servo Drive DZRALTE-025L200 is a fully digital servo drive designed to drive brushed and brushless servomotors from a compact form factor. It operates in torque, velocity, or position mode using Space Vector Modulation for higher efficiency. The drive features configurable digital and analog inputs and outputs for interfacing with external devices, and it can be configured over RS-232, RS-485, or via an analog input. The drive provides 25A of peak current and 12.5A of continuous current from a 40-175VDC supply voltage.
Advanced motion controls dprahir 030a800
The DigiFlex® PerformanceTM Servo Drive DPRAHIR-030A800 is a digital servo drive designed to drive brushed and brushless servomotors in torque, velocity, or position mode. It employs Space Vector Modulation technology for high efficiency and features configurable inputs/outputs, communication interfaces, and approval for CE and RoHS compliance. The drive provides 30A peak current output from a 200-480VAC, 3-phase power supply.
Advanced motion controls dzcante 040l080
The DigiFlex® PerformanceTM Servo Drive DZCANTE-040L080 is a digital servo drive designed to control brushed and brushless motors. It operates in torque, velocity, or position mode using space vector modulation. The drive features configurable digital and analog inputs and outputs, and communicates using CANopen or RS-232. It can source up to 40A peak current to control motors in various operation modes.
Similar to Load indicator (20)
Recently uploaded
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
6th International Conference on Machine Learning & Applications (CMLA 2024)
6th International Conference on Machine Learning & Applications (CMLA 2024) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications of on Machine Learning & Applications.
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Bigdata of technology
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
New techniques for characterising damage in rock slopes.pdf
rock mass characterization and New techniques for characterising damage in rock slopes
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
Low power architecture of logic gates using adiabatic techniques
The growing significance of portable systems to limit power consumption in ultra-large-scale-integration chips of very high density, has recently led to rapid and inventive progresses in low-power design. The most effective technique is adiabatic logic circuit design in energy-efficient hardware. This paper presents two adiabatic approaches for the design of low power circuits, modified positive feedback adiabatic logic (modified PFAL) and the other is direct current diode based positive feedback adiabatic logic (DC-DB PFAL). Logic gates are the preliminary components in any digital circuit design. By improving the performance of basic gates, one can improvise the whole system performance. In this paper proposed circuit design of the low power architecture of OR/NOR, AND/NAND, and XOR/XNOR gates are presented using the said approaches and their results are analyzed for powerdissipation, delay, power-delay-product and rise time and compared with the other adiabatic techniques along with the conventional complementary metal oxide semiconductor (CMOS) designs reported in the literature. It has been found that the designs with DC-DB PFAL technique outperform with the percentage improvement of 65% for NOR gate and 7% for NAND gate and 34% for XNOR gate over the modified PFAL techniques at 10 MHz respectively.
Literature Review Basics and Understanding Reference Management.pptx
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
A review on techniques and modelling methodologies used for checking electrom...
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
Recently uploaded (20)
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
6th International Conference on Machine Learning & Applications (CMLA 2024)
6th International Conference on Machine Learning & Applications (CMLA 2024)
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...
ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...
New techniques for characterising damage in rock slopes.pdf
New techniques for characterising damage in rock slopes.pdf
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
Low power architecture of logic gates using adiabatic techniques
Low power architecture of logic gates using adiabatic techniques
Literature Review Basics and Understanding Reference Management.pptx
Literature Review Basics and Understanding Reference Management.pptx
A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...
Load indicator
- 1. • • • • • SPECIFICATIONS PERFORMANCE Voltage 5 or 10 VDC Current – MAX 500 mA Maximum Display Count ±999,999 ELECTRICAL Serial Interface RS232 duplex Excitation (VDC or VAC) 5 or 10 VDC max Relay Output: 2 Relay Setpoint Processor Philips 8052 processor A/D Converter Resolution Sigma Delta Type with 24 bits resolution A/D Clock 100 Hz ELECTRONICS Conversion Speed 500 Hz internal Averageing Signal Sensitivity Keypad 4 key front mount keypad MODEL- PLI-01B CAPACITIES MODEL # PLI - 01B DIMENSIONS PRECISION LOAD INDICATOR WITH FAST PEAK HOLD FUNCTION Email - sales@precision-robotics.com http://www.precision-robotics.com Phone - 91 9074040000, 9993350000 Precision Robotics & Automation Robotics & Automation 205, Bhavna Apartment, Satyadev Nagar Gwalior - 2 Front panel calibration 2 Relay setpoint Peak- Hold & Tare Function Panel mount Aluminium Housing Full duplex RS232C communication Feature PrecisionForceMeasuringDevice 1micro volt to 3 micro volts per division of weight Input line filter for EMI and RFI suppression 190 mm 95mm 155 m m 86mm 182 mm Accept 1 mv/v to 3.3 mv/v load cell signal • Hi-speed A/D conversion rate of 3000 times/sec (resolution: 24 bit.. • The high-performance filtering functions by using both analogue and digital technology • Cover wide range of applications: fast response time and high accuracy • it can be also used for highly accurate weighing system by adjusting A/D conversion rate.