LNG Operations Related Experience
•Download as DOCX, PDF•
1 like•127 views
This candidate has over 20 years of experience commissioning and starting up gas processing units including gas reception, dehydration, sweetening, sulfur recovery units, and LPG and condensate storage and loading in the Middle East and Russia. They have experience operating gas processing plants up to 1 BSCFD capacity and participating in safety studies. They also have experience operating liquefied natural gas equipment including cryogenic exchangers, demethanizers, and turbo expanders.
Report
Share
Report
Share
Recommended
Spinner velosity tool
The document discusses velocity tools used in production logging, specifically focusing on spinners which measure fluid flow velocities. It provides background on spinners, including their history, types, basic working principles, and challenges in measurement. Graphical methods for interpreting spinner log data are also explained.
ADVANCED PRODUCTION LOGGING, CASED HOLE & PRODUCTION LOG EVALUATION
The following agenda is based on three morning and three afternoon sessions daily, each session approximately one to 1-1/4 hours in length. These sessions are labelled M1, M2, M3, and A1, A2, and A3 respectively. Note that class problems (PROBLEMS), movies (MOVIES), and guest lecturers (GUEST) have been highlighted. Numerous log examples for class discussion are also presented throughout the course.
Resume
Vasim Abdul Rajjak Padvekar is seeking assignments in chemical analysis or oil analysis with reputed organizations, preferably in the oil and chemical industry in the Gulf region. He has over 10 years of experience in chemical analysis, product and process improvement, documentation, and quality compliance. Some of his areas of expertise include executing cost-saving techniques, coordinating QA/QC, and ensuring compliance with quality measures. He is proficient in various analytical instruments and has worked on projects analyzing chemicals, oils, sludge, sediments, and other materials. He is seeking roles that leverage his strong background in chemical laboratory work and quality control.
Analyzer Engineer Process Hydrocarbons
Kamran Saeed is a commissioning engineer seeking a position utilizing his experience commissioning and testing various analyzers including oil in water analyzers, water cut analyzers, and gas analyzers for clients such as Saudi Aramco, SABIC, and others. He has over 10 years of experience commissioning analyzers that detect hydrocarbons, water content, hydrogen sulfide, and other components. His responsibilities include installation, testing, troubleshooting, and providing recommendations on appropriate analyzers for clients' needs.
Analyzer Maintenance Engineer.
Amit Seladiya has over 6 years of experience as an Analyzer Service Engineer working in oil and gas refineries in Qatar, Saudi Arabia, UAE, and India. He has expertise in maintaining and troubleshooting various analyzers including gas chromatographs, stack analyzers, and moisture and oxygen controllers. Seladiya is skilled at sample conditioning system maintenance and has extensive training in safety procedures like permit to work systems.
Well Test Design and Analysis
This 5 day training course is designed to give you a comprehensive account of methods and techniques used in modern well testing and analysis. Subsequently to outlining well test objectives and general methodologies applied, the course will provide real case studies and practice using modern software for Pressure Transient Analysis. These exercises will demonstrate clearly the limitations, assumptions and applicability of various techniques applied in the field.
Africore energy services company profile
This document provides an overview of industrial services offered by a company, including pipeline and plant inspection, hot tapping and stopple plugging, in-line inspection surveys, leak detection and repair, manufacturing and installation of pig launchers and receivers, on-site machining, on-site leak sealing, and heavy duty solvents and chemicals for industrial cleaning. The services cover pipeline and plant inspection, intelligent pigging, leak sealing, and on-site support across various industrial sectors including oil and gas, petrochemical, and power generation.
Bridging the Gap in Flow Measurement
This document discusses challenges in obtaining accurate well test measurements and quicker analyses. It introduces a new non-radioactive multiphase flow meter (MPFM) that can provide instant well diagnostics without complex equipment or sampling. The MPFM uses proprietary modeling to identify flow regimes and measure dynamic properties. It has a range of 1-6 inches, works at pressures up to 5,000 psi and 300°F, and was proven on 76 wells to have liquid flow uncertainties of ±5.6%, water cut of ±2.5%, and gas flow of ±8.9% compared to test separators. The MPFM technology bridges gaps in flow measurement capabilities.
Recommended
Spinner velosity tool
The document discusses velocity tools used in production logging, specifically focusing on spinners which measure fluid flow velocities. It provides background on spinners, including their history, types, basic working principles, and challenges in measurement. Graphical methods for interpreting spinner log data are also explained.
ADVANCED PRODUCTION LOGGING, CASED HOLE & PRODUCTION LOG EVALUATION
The following agenda is based on three morning and three afternoon sessions daily, each session approximately one to 1-1/4 hours in length. These sessions are labelled M1, M2, M3, and A1, A2, and A3 respectively. Note that class problems (PROBLEMS), movies (MOVIES), and guest lecturers (GUEST) have been highlighted. Numerous log examples for class discussion are also presented throughout the course.
Resume
Vasim Abdul Rajjak Padvekar is seeking assignments in chemical analysis or oil analysis with reputed organizations, preferably in the oil and chemical industry in the Gulf region. He has over 10 years of experience in chemical analysis, product and process improvement, documentation, and quality compliance. Some of his areas of expertise include executing cost-saving techniques, coordinating QA/QC, and ensuring compliance with quality measures. He is proficient in various analytical instruments and has worked on projects analyzing chemicals, oils, sludge, sediments, and other materials. He is seeking roles that leverage his strong background in chemical laboratory work and quality control.
Analyzer Engineer Process Hydrocarbons
Kamran Saeed is a commissioning engineer seeking a position utilizing his experience commissioning and testing various analyzers including oil in water analyzers, water cut analyzers, and gas analyzers for clients such as Saudi Aramco, SABIC, and others. He has over 10 years of experience commissioning analyzers that detect hydrocarbons, water content, hydrogen sulfide, and other components. His responsibilities include installation, testing, troubleshooting, and providing recommendations on appropriate analyzers for clients' needs.
Analyzer Maintenance Engineer.
Amit Seladiya has over 6 years of experience as an Analyzer Service Engineer working in oil and gas refineries in Qatar, Saudi Arabia, UAE, and India. He has expertise in maintaining and troubleshooting various analyzers including gas chromatographs, stack analyzers, and moisture and oxygen controllers. Seladiya is skilled at sample conditioning system maintenance and has extensive training in safety procedures like permit to work systems.
Well Test Design and Analysis
This 5 day training course is designed to give you a comprehensive account of methods and techniques used in modern well testing and analysis. Subsequently to outlining well test objectives and general methodologies applied, the course will provide real case studies and practice using modern software for Pressure Transient Analysis. These exercises will demonstrate clearly the limitations, assumptions and applicability of various techniques applied in the field.
Africore energy services company profile
This document provides an overview of industrial services offered by a company, including pipeline and plant inspection, hot tapping and stopple plugging, in-line inspection surveys, leak detection and repair, manufacturing and installation of pig launchers and receivers, on-site machining, on-site leak sealing, and heavy duty solvents and chemicals for industrial cleaning. The services cover pipeline and plant inspection, intelligent pigging, leak sealing, and on-site support across various industrial sectors including oil and gas, petrochemical, and power generation.
Bridging the Gap in Flow Measurement
This document discusses challenges in obtaining accurate well test measurements and quicker analyses. It introduces a new non-radioactive multiphase flow meter (MPFM) that can provide instant well diagnostics without complex equipment or sampling. The MPFM uses proprietary modeling to identify flow regimes and measure dynamic properties. It has a range of 1-6 inches, works at pressures up to 5,000 psi and 300°F, and was proven on 76 wells to have liquid flow uncertainties of ±5.6%, water cut of ±2.5%, and gas flow of ±8.9% compared to test separators. The MPFM technology bridges gaps in flow measurement capabilities.
CV Mohsen Maddahi
This document contains the professional profile and experience of Mohsen Maddahi, a petroleum engineer based in Iran. It outlines his contact information, skills including process simulation software and languages, education as a petroleum engineer, and work history in various roles for oil and gas companies in Iran. His experience includes well operations, production monitoring, facility commissioning and startup, and process engineering responsibilities.
Advanced Pipeline Risk Assessment vs. Simplified NACE Standards
NACE - ICDA standards for wet-gas and normally dry gas are founded on our ICPT-PM advanced hazard modelling algorithms.
ICPT-PM pin-points the most probable locations of corrosion and the severity of corrosion damage accumulated over-life metal loss along the pipeline; prioritized regions for integrity validation.
ICPT-PM provides mitigation guidance for Production Operations
action to prevent corrosion initiation action plan to prevent growth of pre-existing corrosion damage.
Pipeline Integrity Hazard Modelling & Mitigation - Internal Corrosion
ICPT-PM pin-points the most probable locations of corrosion and the severity of corrosion damage and accumulated over-life metal loss along the pipeline; prioritizes regions for integrity validation.
ICPT-PM provides mitigation guidance for Production Operations
action to prevent corrosion initiation action plan to prevent growth of pre-existing corrosion damage.
maneesh cv
Maneesh Kumar provides his curriculum vitae. He has over 11 years of experience as a chemical operation supervisor and chemist in the GCC. He holds a Bachelor's degree in Industrial Chemistry from Kerala University in India. His objective is to enhance his knowledge by joining a result-oriented development team. He has strong analytical and problem-solving skills and experience operating various analytical instruments and software.
Haytham CV 2015 final October
This document contains a summary of Haytham Mohammed Ahmed Aly's qualifications and work experience. It details his 20 years of experience as a chemist and laboratory manager at SIDPEC Petrochemicals Company in Egypt, where he currently serves as the Deputy Manager of the Ethylene, Utility and Environmental Research Department, overseeing 4 shift teams. It also lists his educational background and training certificates in chemistry and laboratory analysis techniques.
Moses -resume
M. Moses Mohanraj is a Process Engineer with over 6 years of experience in process design across offshore and onshore projects. He has expertise in areas such as P&ID preparation, PSV sizing, simulation software like Hysys, flare analysis, and preparing technical documents. He is seeking a role that allows him to apply his knowledge and contribute to engineering organizations.
MY RESUME.
This document provides a summary of Abdullah Elsayed Abdullah Mohammed Hussein's professional experience and qualifications. Over 7 years, he has worked in oilfield production chemistry, laboratory analysis, and chemical selection. He has extensive hands-on experience in areas such as crude oil and water treatment, scale and corrosion management, and laboratory instrumentation. He currently holds a senior chemist position at Gulf of Suez Petroleum Company where he is responsible for production chemistry activities and laboratory analysis.
Materials, Corrosion and Flow Assurance Services
This document describes materials testing and corrosion services provided by DNV GL. It discusses DNV GL's 18 laboratories across three continents that offer a broad range of testing services. These include consulting, research and testing, customized tests, failure analysis, and training. The document focuses on DNV GL's capabilities for corrosion studies including flow induced corrosion testing using large scale flow loops, rotating cylinder experiments, and autoclave testing. It also discusses computational modeling and analytical facilities for corrosion identification.
Production logging tools
production engineering 2 topic.
which includes the production logging tools, its application, categories of application and also some uses of the log with example in the practical life and physics.
Well test procedures manual
This document provides procedures for well testing at ENI S.p.A. Agip Division. It outlines responsibilities for personnel involved in well testing, describes various types of production tests, safety barriers, downhole and surface equipment used, and procedures for preparing wells, installing test strings, executing tests, collecting data, sampling, and abandoning or suspending wells. The document is confidential property of ENI and intended to guide their technicians and engineers in well testing activities worldwide.
Slattery_Resume_022516_Chemical Engineer Resume
Ian Slattery is a chemical engineer with over 9 years of experience in process development, equipment design, and project management across various industries such as water treatment, oil production, and refrigeration. He has worked as a consultant, research engineer, lead engineer, and intern. His expertise includes process simulation, cost analysis, equipment design, scale-up, experimental design, and project planning. He holds several patents and has managed projects on time and on budget.
Pipeline Design for Isothermal, Turbulent Flow of Non-Newtonian Fluids
Pipeline Design for Isothermal, Turbulent Flow of Non-Newtonian Fluids
0 INTRODUCTION/PURPOSE
1 SCOPE
2 FIELD OF APPLICATION
3 DEFINITIONS
4 DESCRIPTION OF ANOMALOUS EFFECTS
4.1 Wall Slip
4.2 Drag Reduction in Polymeric Materials
4.3 Transition Delay by Polymeric Materials
4.4 Drag Reduction in Suspensions
5 DESIGN PROCEDURE FOR PRESSURE DROP
IN TURBULENT PIPE FLOW IN THE ABSENCE
OF DRAG REDUCTION
5.1 Pressure Drop in the Absence of Wall Slip and
Drag Reduction
5.2 Wall Slip
5.3 Pipe Roughness
5.4 Pipe Fittings
6 DESIGN PROCEDURE FOR DRAG REDUCING
POLYMERIC MATERIALS
6.1 General
6.2 Transition Delay
6.3 Pipe Roughness
6.4 Pipe Fittings
7 DESIGN PROCEDURE FOR DRAG REDUCING
FIBRE SUSPENSIONS
8 BIBLIOGRAPHY
9 NOMENCLATURE
FIGURES
1 DRAG REDUCTION PHENOMENA
2 TRANSITION DELAY PHENOMENA
3 PROCEDURE FOR THE CALCULATION OF
PRESSURE DROP IN TURBULENT NON-NEWTONIAN
PIPE FLOW
4 TYPICAL RELATIONSHIP FOR Ψ VERSUS ʋ*
C184 e037 b
The document provides information on gas chromatography columns from Shimadzu, including:
- High-performance capillary columns with stationary phases like dimethyl polysiloxane and diphenyl polysiloxane for applications such as flavors and aromas.
- General purpose capillary columns for routine analysis with phases like 5% diphenyl polysiloxane and 6% cyanopropylphenyl polysiloxane.
- Dedicated columns designed for specific analyte classes like PBDEs, organochlorine pesticides, and fatty acid methyl esters (FAMEs).
- Other column types like molecular sieves, porous polymers, and aluminum oxide for specialized applications.
Cross-
UPDATED RESUME
The document provides a summary and details of Abdullah Elsayed Abdullah Mohammed Hussein's professional experience as a senior chemist with over 8 years of experience in oilfield production chemistry including crude oil and water treatment, scale deposits management, corrosion problems, and operating analytical instruments in a chemical laboratory to analyze various samples and solve field problems. It also includes his education background, employment history at Gulf of Suez Petroleum Company, roles and responsibilities, and training courses completed.
Ukande sopan new- 2016
This resume is for Ukande Sopan Sakaram, who has over 17 years of experience working as a chemist in petrochemical and refinery laboratories. He has a Master's degree in Chemistry and is skilled in instrumental and wet chemical analysis techniques. His experience includes analyzing petroleum products, polymers, and petrochemicals using various instruments. He is proficient in English and seeks a position as a laboratory chemist.
CRUDE ASSAY Non-Tech Oct 2015 BC
Bureau Veritas is a global leader in testing, inspection, and certification services with 66,000 employees across 1,330 offices in 140 countries. In 2014, its largest business lines by revenue were industry (23%), construction (11%), and commodities (17%). A crude oil assay is a chemical evaluation of a crude oil that provides detailed hydrocarbon analysis data to help producers, traders, and refiners assess each crude oil's properties and compatibility with refinery configurations. Assays can range from quick flash assays costing $2,500-$5,000 using gas chromatography to analyze whole crude properties, to comprehensive assays costing $10,000-$30,000 involving distillation and over 150 tests on fractions to determine a
Bluefield Asset Management Specialists - Proactive Maintenance
Proactive maintenance can reduce maintenance costs significantly in mining. Implementing proactive maintenance practices is not as hard as you may expect.
CV_RuchiraDas
This CV summarizes the qualifications and experience of Ruchira Das. She has 6 years of experience as a Process Engineer working on projects in oil and gas processing. Her skills include using process simulation software and preparing engineering documents such as P&IDs, PFDs, and equipment datasheets. She has worked on projects in the Middle East and India for companies like WorleyParsons and KBR Technology.
PRACTICAL GUIDE TO DEVELOPING PROCESS FLOW DIAGRAMS AND PRELIMINARY ENGINEER...
PRACTICAL GUIDE TO DEVELOPING PROCESS FLOW DIAGRAMS AND PRELIMINARY ENGINEERING LINE DIAGRAMS PROCESS
CONTENTS
1 INTRODUCTION
2 DESCRIPTION OF METHODOLOGY
2.1 Philosophy of the Design Process
2.2 Outline of Methodology
2.3 Additional Aspects of Methodology
3 WORKBOOK
4 EXAMPLE: BATCH NEUTRALIZATION AND STRIPPING PROCESS
4.1 Start of Stage 1
4.2 Stage 1
4.3 Stage 2
4.3 Stage 3
5 REFERENCES
TABLES
1 DESIGN OBJECTIVES
2 OUTPUT FROM EACH STAGE
3 STEP BY STEP APPROACH
4 FUNCTION
5 OPERATION
6 FAILURES
7 STAGE 3 PROMPTS (DATA SHEET)
8 PRELIMINARY MASS BALANCE
9 PRELIMINARY EQUIPMENT LIST
10 POTENTIAL PROBLEMS
11 STAGE 2: DEVELOPMENT OF OPERATING STATES AND TRANSMISSIONS
12 POTENTIAL PROBLEMS
FIGURES
1 DESIGN PROCESS
2 DESIGN PHILOSOPHY.
3 SUMMARY OF METHODOLOGY
4 POSSIBLE OUTCOMES FROM A KEYWORD PROMPT
5 OPERATING STATES
6 OPERATING STATES/TRANSITIONS
7 EXAMPLE: OVERALL BLOCK DIAGRAM
8 EXAMPLE: “PRIMITIVE PFD”
9 EXAMPLE: STAGE 1 “WORKING DIAGRAM”.
10 EXAMPLE: MAIN OPERATING STATES AND TRANSITIONS
11 EXAMPLE: DETAILED PFD (END OF STAGE 1)
12 EXAMPLE: STAGE 2 “WORKING DIAGRAM”
13 EXAMPLE: STAGE 3 “REV 0” ELD
Orifice Restrictors - Design Guidelines
ORIFICE RESTRICTOR: DESIGN GUIDELINES
SPECIFICATION OF FUNCTION
DESCRIPTION OF FLUID
INLET FLUID PHASE(S)
FLOWRATE
UPSTREAM PRESSURE
DOWNSTREAM PRESSURE
OPERATING TEMPERATURE
TEMPERATURE EXTREMES: MINIMUM
TEMPERATURE EXTREMES: MAXIMUM
UPSTREAM DENSITY
UPSTREAM COMPRESSIBILITY FACTOR.
IS RESTRICTOR PART OF SAFETY SYSTEM?
LINE SIZE
LINE REFERENCE
CALCULATED ORIFICE DIAMETER
CURRENT CV1 2015
The document contains the resume of Osumanu Basiru. It summarizes his work experience as a Senior Operator at ADNOC subsidiary Abu Dhabi Gas Industry (GASCO) in the UAE since 2012, where he has responsibilities like monitoring facilities and providing work instructions to operators. It also outlines his previous role as a Senior Production Operator at a petroleum refinery in Ghana from 2006 to 2012.
Career Highlights_ Cover Letter
The candidate has over 13 years of experience in process engineering, primarily in the oil and gas sector. They have worked on both onshore and offshore projects, and have led a team of 10 process engineers. Their expertise includes concept selection, process simulation, equipment sizing, and engineering design. They are seeking a role as a process engineer, commissioning engineer, or project manager.
More Related Content
What's hot
CV Mohsen Maddahi
This document contains the professional profile and experience of Mohsen Maddahi, a petroleum engineer based in Iran. It outlines his contact information, skills including process simulation software and languages, education as a petroleum engineer, and work history in various roles for oil and gas companies in Iran. His experience includes well operations, production monitoring, facility commissioning and startup, and process engineering responsibilities.
Advanced Pipeline Risk Assessment vs. Simplified NACE Standards
NACE - ICDA standards for wet-gas and normally dry gas are founded on our ICPT-PM advanced hazard modelling algorithms.
ICPT-PM pin-points the most probable locations of corrosion and the severity of corrosion damage accumulated over-life metal loss along the pipeline; prioritized regions for integrity validation.
ICPT-PM provides mitigation guidance for Production Operations
action to prevent corrosion initiation action plan to prevent growth of pre-existing corrosion damage.
Pipeline Integrity Hazard Modelling & Mitigation - Internal Corrosion
ICPT-PM pin-points the most probable locations of corrosion and the severity of corrosion damage and accumulated over-life metal loss along the pipeline; prioritizes regions for integrity validation.
ICPT-PM provides mitigation guidance for Production Operations
action to prevent corrosion initiation action plan to prevent growth of pre-existing corrosion damage.
maneesh cv
Maneesh Kumar provides his curriculum vitae. He has over 11 years of experience as a chemical operation supervisor and chemist in the GCC. He holds a Bachelor's degree in Industrial Chemistry from Kerala University in India. His objective is to enhance his knowledge by joining a result-oriented development team. He has strong analytical and problem-solving skills and experience operating various analytical instruments and software.
Haytham CV 2015 final October
This document contains a summary of Haytham Mohammed Ahmed Aly's qualifications and work experience. It details his 20 years of experience as a chemist and laboratory manager at SIDPEC Petrochemicals Company in Egypt, where he currently serves as the Deputy Manager of the Ethylene, Utility and Environmental Research Department, overseeing 4 shift teams. It also lists his educational background and training certificates in chemistry and laboratory analysis techniques.
Moses -resume
M. Moses Mohanraj is a Process Engineer with over 6 years of experience in process design across offshore and onshore projects. He has expertise in areas such as P&ID preparation, PSV sizing, simulation software like Hysys, flare analysis, and preparing technical documents. He is seeking a role that allows him to apply his knowledge and contribute to engineering organizations.
MY RESUME.
This document provides a summary of Abdullah Elsayed Abdullah Mohammed Hussein's professional experience and qualifications. Over 7 years, he has worked in oilfield production chemistry, laboratory analysis, and chemical selection. He has extensive hands-on experience in areas such as crude oil and water treatment, scale and corrosion management, and laboratory instrumentation. He currently holds a senior chemist position at Gulf of Suez Petroleum Company where he is responsible for production chemistry activities and laboratory analysis.
Materials, Corrosion and Flow Assurance Services
This document describes materials testing and corrosion services provided by DNV GL. It discusses DNV GL's 18 laboratories across three continents that offer a broad range of testing services. These include consulting, research and testing, customized tests, failure analysis, and training. The document focuses on DNV GL's capabilities for corrosion studies including flow induced corrosion testing using large scale flow loops, rotating cylinder experiments, and autoclave testing. It also discusses computational modeling and analytical facilities for corrosion identification.
Production logging tools
production engineering 2 topic.
which includes the production logging tools, its application, categories of application and also some uses of the log with example in the practical life and physics.
Well test procedures manual
This document provides procedures for well testing at ENI S.p.A. Agip Division. It outlines responsibilities for personnel involved in well testing, describes various types of production tests, safety barriers, downhole and surface equipment used, and procedures for preparing wells, installing test strings, executing tests, collecting data, sampling, and abandoning or suspending wells. The document is confidential property of ENI and intended to guide their technicians and engineers in well testing activities worldwide.
Slattery_Resume_022516_Chemical Engineer Resume
Ian Slattery is a chemical engineer with over 9 years of experience in process development, equipment design, and project management across various industries such as water treatment, oil production, and refrigeration. He has worked as a consultant, research engineer, lead engineer, and intern. His expertise includes process simulation, cost analysis, equipment design, scale-up, experimental design, and project planning. He holds several patents and has managed projects on time and on budget.
Pipeline Design for Isothermal, Turbulent Flow of Non-Newtonian Fluids
Pipeline Design for Isothermal, Turbulent Flow of Non-Newtonian Fluids
0 INTRODUCTION/PURPOSE
1 SCOPE
2 FIELD OF APPLICATION
3 DEFINITIONS
4 DESCRIPTION OF ANOMALOUS EFFECTS
4.1 Wall Slip
4.2 Drag Reduction in Polymeric Materials
4.3 Transition Delay by Polymeric Materials
4.4 Drag Reduction in Suspensions
5 DESIGN PROCEDURE FOR PRESSURE DROP
IN TURBULENT PIPE FLOW IN THE ABSENCE
OF DRAG REDUCTION
5.1 Pressure Drop in the Absence of Wall Slip and
Drag Reduction
5.2 Wall Slip
5.3 Pipe Roughness
5.4 Pipe Fittings
6 DESIGN PROCEDURE FOR DRAG REDUCING
POLYMERIC MATERIALS
6.1 General
6.2 Transition Delay
6.3 Pipe Roughness
6.4 Pipe Fittings
7 DESIGN PROCEDURE FOR DRAG REDUCING
FIBRE SUSPENSIONS
8 BIBLIOGRAPHY
9 NOMENCLATURE
FIGURES
1 DRAG REDUCTION PHENOMENA
2 TRANSITION DELAY PHENOMENA
3 PROCEDURE FOR THE CALCULATION OF
PRESSURE DROP IN TURBULENT NON-NEWTONIAN
PIPE FLOW
4 TYPICAL RELATIONSHIP FOR Ψ VERSUS ʋ*
C184 e037 b
The document provides information on gas chromatography columns from Shimadzu, including:
- High-performance capillary columns with stationary phases like dimethyl polysiloxane and diphenyl polysiloxane for applications such as flavors and aromas.
- General purpose capillary columns for routine analysis with phases like 5% diphenyl polysiloxane and 6% cyanopropylphenyl polysiloxane.
- Dedicated columns designed for specific analyte classes like PBDEs, organochlorine pesticides, and fatty acid methyl esters (FAMEs).
- Other column types like molecular sieves, porous polymers, and aluminum oxide for specialized applications.
Cross-
UPDATED RESUME
The document provides a summary and details of Abdullah Elsayed Abdullah Mohammed Hussein's professional experience as a senior chemist with over 8 years of experience in oilfield production chemistry including crude oil and water treatment, scale deposits management, corrosion problems, and operating analytical instruments in a chemical laboratory to analyze various samples and solve field problems. It also includes his education background, employment history at Gulf of Suez Petroleum Company, roles and responsibilities, and training courses completed.
Ukande sopan new- 2016
This resume is for Ukande Sopan Sakaram, who has over 17 years of experience working as a chemist in petrochemical and refinery laboratories. He has a Master's degree in Chemistry and is skilled in instrumental and wet chemical analysis techniques. His experience includes analyzing petroleum products, polymers, and petrochemicals using various instruments. He is proficient in English and seeks a position as a laboratory chemist.
CRUDE ASSAY Non-Tech Oct 2015 BC
Bureau Veritas is a global leader in testing, inspection, and certification services with 66,000 employees across 1,330 offices in 140 countries. In 2014, its largest business lines by revenue were industry (23%), construction (11%), and commodities (17%). A crude oil assay is a chemical evaluation of a crude oil that provides detailed hydrocarbon analysis data to help producers, traders, and refiners assess each crude oil's properties and compatibility with refinery configurations. Assays can range from quick flash assays costing $2,500-$5,000 using gas chromatography to analyze whole crude properties, to comprehensive assays costing $10,000-$30,000 involving distillation and over 150 tests on fractions to determine a
Bluefield Asset Management Specialists - Proactive Maintenance
Proactive maintenance can reduce maintenance costs significantly in mining. Implementing proactive maintenance practices is not as hard as you may expect.
CV_RuchiraDas
This CV summarizes the qualifications and experience of Ruchira Das. She has 6 years of experience as a Process Engineer working on projects in oil and gas processing. Her skills include using process simulation software and preparing engineering documents such as P&IDs, PFDs, and equipment datasheets. She has worked on projects in the Middle East and India for companies like WorleyParsons and KBR Technology.
PRACTICAL GUIDE TO DEVELOPING PROCESS FLOW DIAGRAMS AND PRELIMINARY ENGINEER...
PRACTICAL GUIDE TO DEVELOPING PROCESS FLOW DIAGRAMS AND PRELIMINARY ENGINEERING LINE DIAGRAMS PROCESS
CONTENTS
1 INTRODUCTION
2 DESCRIPTION OF METHODOLOGY
2.1 Philosophy of the Design Process
2.2 Outline of Methodology
2.3 Additional Aspects of Methodology
3 WORKBOOK
4 EXAMPLE: BATCH NEUTRALIZATION AND STRIPPING PROCESS
4.1 Start of Stage 1
4.2 Stage 1
4.3 Stage 2
4.3 Stage 3
5 REFERENCES
TABLES
1 DESIGN OBJECTIVES
2 OUTPUT FROM EACH STAGE
3 STEP BY STEP APPROACH
4 FUNCTION
5 OPERATION
6 FAILURES
7 STAGE 3 PROMPTS (DATA SHEET)
8 PRELIMINARY MASS BALANCE
9 PRELIMINARY EQUIPMENT LIST
10 POTENTIAL PROBLEMS
11 STAGE 2: DEVELOPMENT OF OPERATING STATES AND TRANSMISSIONS
12 POTENTIAL PROBLEMS
FIGURES
1 DESIGN PROCESS
2 DESIGN PHILOSOPHY.
3 SUMMARY OF METHODOLOGY
4 POSSIBLE OUTCOMES FROM A KEYWORD PROMPT
5 OPERATING STATES
6 OPERATING STATES/TRANSITIONS
7 EXAMPLE: OVERALL BLOCK DIAGRAM
8 EXAMPLE: “PRIMITIVE PFD”
9 EXAMPLE: STAGE 1 “WORKING DIAGRAM”.
10 EXAMPLE: MAIN OPERATING STATES AND TRANSITIONS
11 EXAMPLE: DETAILED PFD (END OF STAGE 1)
12 EXAMPLE: STAGE 2 “WORKING DIAGRAM”
13 EXAMPLE: STAGE 3 “REV 0” ELD
Orifice Restrictors - Design Guidelines
ORIFICE RESTRICTOR: DESIGN GUIDELINES
SPECIFICATION OF FUNCTION
DESCRIPTION OF FLUID
INLET FLUID PHASE(S)
FLOWRATE
UPSTREAM PRESSURE
DOWNSTREAM PRESSURE
OPERATING TEMPERATURE
TEMPERATURE EXTREMES: MINIMUM
TEMPERATURE EXTREMES: MAXIMUM
UPSTREAM DENSITY
UPSTREAM COMPRESSIBILITY FACTOR.
IS RESTRICTOR PART OF SAFETY SYSTEM?
LINE SIZE
LINE REFERENCE
CALCULATED ORIFICE DIAMETER
What's hot (20)
Advanced Pipeline Risk Assessment vs. Simplified NACE Standards
Advanced Pipeline Risk Assessment vs. Simplified NACE Standards
Pipeline Integrity Hazard Modelling & Mitigation - Internal Corrosion
Pipeline Integrity Hazard Modelling & Mitigation - Internal Corrosion
Pipeline Design for Isothermal, Turbulent Flow of Non-Newtonian Fluids
Pipeline Design for Isothermal, Turbulent Flow of Non-Newtonian Fluids
Bluefield Asset Management Specialists - Proactive Maintenance
Bluefield Asset Management Specialists - Proactive Maintenance
PRACTICAL GUIDE TO DEVELOPING PROCESS FLOW DIAGRAMS AND PRELIMINARY ENGINEER...
PRACTICAL GUIDE TO DEVELOPING PROCESS FLOW DIAGRAMS AND PRELIMINARY ENGINEER...
Similar to LNG Operations Related Experience
CURRENT CV1 2015
The document contains the resume of Osumanu Basiru. It summarizes his work experience as a Senior Operator at ADNOC subsidiary Abu Dhabi Gas Industry (GASCO) in the UAE since 2012, where he has responsibilities like monitoring facilities and providing work instructions to operators. It also outlines his previous role as a Senior Production Operator at a petroleum refinery in Ghana from 2006 to 2012.
Career Highlights_ Cover Letter
The candidate has over 13 years of experience in process engineering, primarily in the oil and gas sector. They have worked on both onshore and offshore projects, and have led a team of 10 process engineers. Their expertise includes concept selection, process simulation, equipment sizing, and engineering design. They are seeking a role as a process engineer, commissioning engineer, or project manager.
Resume Rakesh Naik
This document provides a summary of an individual's experience working as a Boardman/Control Room Operator and DCS Coordinator for oil refineries in Saudi Arabia and India. Some key experiences mentioned include overseeing operations of CDU/VDU distillation units, guiding training sessions, managing plant operations and maintenance, and coordinating DCS systems for major refinery projects. The individual also has experience in pre-commissioning, commissioning, and starting up large refineries successfully.
Mohsin Hashmi_Resume
Mohsin Hashmi has over 12 years of experience as a process engineer working on various oil, gas, and petrochemical projects around the world. Some of his responsibilities have included process simulation, equipment design, pipeline hydraulics analysis, relief system design, hazard studies, and project engineering. He is currently a Senior Process Engineer at Technip working on an offshore gas export pipeline project in Saudi Arabia and Kuwait.
SHREYAS__SABNIS CV
Shreyas Sabnis is an Indian citizen currently working as a Senior Process Engineer for GASCO in the UAE. He has over 30 years of experience in process engineering for oil, gas and petrochemical projects. His roles have included front-end engineering design, detailed engineering, commissioning, and project management. He is proficient in process simulation tools such as Hysys, Aspen Plus, PROMAX and dynamic simulation. He has extensive experience in gas processing, refining, and petrochemical projects.
20161206CJRogers
Cristopher Rogers is a chartered chemical engineer with over 24 years of experience in oil and gas, water treatment, and fertilizers. He has worked in six countries and has extensive experience in project development from pre-feasibility to construction and commissioning. He is currently seeking new opportunities where he can apply his leadership, engineering, and project management skills.
Rahulvikram2016
The document is a resume for Rahul Vikram Singh, a Chemical Engineer with 9 years of experience seeking a new position. It outlines his experience including roles in process engineering, plant technical services, project engineering, process development, and plant troubleshooting. It then provides details of his responsibilities and accomplishments in previous roles at Quanta Process Solutions Ltd, Deepak Nitrite Limited, Grasim Industries Ltd, and Gwalior Chemical Industries Ltd. The resume highlights his expertise in areas like basic engineering, process design, project management, commissioning, and plant operations.
Resume Shahid
Shahid Mehmood Rajput has over 28 years of experience in oil and gas operations including as a production supervisor and control room supervisor. He has worked for companies in Pakistan, UAE, and Saudi Arabia on projects involving crude oil and gas plants, pipelines, and distribution networks. He has extensive experience in areas such as plant operations, gas transmission, compression, and commissioning of gas facilities.
My Updated CV
Ibrahim Hammad is a senior process engineer with over 10 years of experience in oil and gas upstream and downstream projects. He has a B.Sc. in petroleum refining and chemical engineering and additional qualifications in natural gas technology, functional safety engineering, HAZOP leadership, and other areas. He currently works as a senior lead process engineer providing technical support and supervision across various gas and oil processing facilities.
swapnil-CV
Swapnil Hosmani is seeking a position as a Process Engineer, bringing over 11 years of experience in chemical engineering. He has a B.E. in Chemical Engineering and has worked for Jacobs Engineering and Occidental Petroleum. He is looking to utilize his expertise in process design, development, and safety engineering to contribute to organizational goals.
DARRELL_W_ROWAT_2015 Rev June 1
This document contains the resume of Darrell W. Rowat, outlining his qualifications and experience as a Control Room Operator and Chief Steam Engineer over nearly 40 years working in various industrial operations and maintenance roles. It details his extensive experience operating and maintaining SAGD plants, boilers, turbines, and other oil and gas and industrial processing equipment. It also lists his safety, technical, and management certificates and qualifications.
Kuntal Re
Kuntal Khashnobish has over 20 years of experience in commissioning and operating petrochemical plants in India and Saudi Arabia. He has worked on commissioning projects for multiple petrochemical facilities and is experienced with equipment like distillation columns, reactors, compressors, and extruders. He has strong technical, troubleshooting, and problem-solving skills and experience ensuring the successful development of commissioning systems and safety procedures.
PARDEEP SINGH LAB CHEMIST Fuchs oil
Pardeep Singh has over 7 years of experience as a lab chemist and supervisor in oil, gas, and petrochemical companies in India and Africa. He has a B.Sc. in Chemistry and qualifications in computer applications and accounting software. His responsibilities have included crude oil, petroleum products, water, and waste testing using various instruments and software systems. Currently he works as a lab supervisor for an oil company in the Democratic Republic of the Congo, conducting lubricant, waste, and used oil analysis.
Laboratory Maintenance installation Commissioning Engineer
Calibration , Commissioning & Testing of Bently Novada Vibration Analyzer , Emerson Vibration CSIC 2140, Hydrogen Sulphide , Crude Oil in Water, Water in Hydrocarbon Flue Gas HF Laser Gas Analyzers, MSA 4X, Ventis, Detector, Machine Analyzer, IR Temperature, Pressure Recorder, Infra Red Temperature Recorders, Thermocouples testing Humidity Meter, Temperature Calibrators , Laser Level , Carbon Monoxide, LEL detector , Oil & Water Meter , Fluke Thermocouple source meter calibration & CEMS Analyzers. Laboratory Chillers. Planning execution testing training and covering standard documentation at client site .
cover latter
The candidate has over 9 years of experience in oil field operations including well testing, drilling, completion, and production. They have worked for various companies in Egypt and Saudi Arabia supervising onshore and offshore wells. The candidate's duties have involved all aspects of well testing from planning and supervision to equipment maintenance and training others. They highlight experience with high pressure, high temperature, foamy oil, and high rate gas wells as well as various stimulation and testing techniques. The candidate is seeking a new position to continue developing their career in the oil and gas industry.
UMAR FAROOQ CV
Umar Farooq is a process engineer with over 8 years of experience in design engineering for upstream, downstream, petrochemical and power plant sectors. He has worked on projects in Abu Dhabi, Saudi Arabia and Pakistan. His responsibilities have included equipment sizing, pipeline hydraulics analysis, vessel and heat exchanger design, relief load calculations, and PFD/P&ID development. He is proficient in various process simulation and engineering software packages.
Saurav Rawat CV
Saurav Rawat is applying for a new career opportunity with Enermech. He has over 4 years of experience as a field operator in oilfield services, operating equipment like nitrogen pumps and cementing units. His performance reviews note him as a competent, safety-conscious, and adaptable operator. He has worked on international projects in locations like Qatar, UAE, India, and the Middle East. Rawat holds a bachelor's degree in electronics engineering and believes his skills would be a valuable asset to Enermech.
Hossein emadi CV
Hossein Emadi provides his resume summarizing his qualifications and experience. He has over 10 years of experience in process engineering working for major companies. He holds an MSc in chemical engineering and has expertise in various process plant designs and projects within the oil, gas, and petrochemical industries. He is proficient in process simulation, heat exchanger design, and carrying out design studies.
Vinod Kumar__Process_Engineer-11+ years_Exp
This document contains the resume of Vinod Kumar, an experienced Process Design Engineer with over 11 years of experience in process engineering and safety activities. He has worked on various projects involving basic and detailed engineering for plants in industries such as oil & gas, fertilizers, petrochemicals, chemicals, and metallurgy. Currently he works as a Manager of Process Engineering for an engineering company undertaking large scale turnkey projects.
remesh new
This document provides personal and professional details of an individual named Ramesh.p. It includes contact information, educational background, work experience, qualifications, responsibilities, and computer skills. The individual has over 15 years of experience in pre-commissioning, commissioning, and operations roles in oil, gas, and petrochemical plants in India and the UAE. Their most recent role is as a Pre-commissioning & Commissioning Supervisor in Abu Dhabi, UAE.
Similar to LNG Operations Related Experience (20)
Laboratory Maintenance installation Commissioning Engineer
Laboratory Maintenance installation Commissioning Engineer
LNG Operations Related Experience
- 1. LNG Operations Related Experience Have more than 20 years of experience incommissioningandstart-upof gasprocessingunitsincluding gas reception,dehydration,sweetening,SRU,UtilitiesandLPG& Condensate storage andloadinginThe middle eastandRussia. LNG Related experience andachievements: Gas processingplantsup to 1 BSCFD capacity Gas receptionanddewateringincludingpipelinepigging ReviewedOperatingprocedures, PFD,P&ID&plantmodel Participatedin HAZID,SOMstudies ParticipatedinHAZOP&3D model review of fielddesignchangesandnew units Developingoperatingprocedures&trainpersonnel Conductclass roomtrainingforoperatingpersonnelusingPIDs&manuals PID walkdowntoprepare & resolution of punchlists (A,B,C) forRFO,RFCandRFSU Loop checkinginDCS,prepare & resolutiontoensure endtoendfunctionality Site acceptance test(SAT) of all majorequipment&units RFO/RFC& RFSU Activities:Line blowing,dryout,purging,inerting,N2freeing,leaktesting Soda ash/waterwashof amine system, catalystloading,refractory&catalyst drying& passivation Preparingsystems start-upsequence:Power,IA,FG,Utilities,SL,processunits Commissioning&Start up,normal operationandperformance test Projectclose out:Tracking & clearingpunchitems,agreementoncontentious items Operationof LNG Related equipment: ConocoPhillips’s“OptimizedCascade Process”forgasliquifaction Turbines:Frame 3 & 5, GE SpeedtronicMkII, III,IV & V Centrifugal compressors,turbinedriven&multi stage withinter-stagewithdrawal Gas compressionforexportaswell asre-injection CryogenicexchangersandDe-Methanizer Air liquefactiontoproduce Nitrogen Turbo expanders Gas dehydrationusingMEG (-45C) and TEG (Ambient temperature) Gas & LPG sweeteningusingAmine (ADIP,MDEA),MEROX& Mol.sieves LPG & Condensate Storage &Loading SRU usingClause process Utilities:Inst&Secure Air;H2S, LEL and Fire detectionand fightingwithclosed loopfire water B.Sc. inChemistryand4th ClassPowerEngineering
- 2. 20+ yearsof cryogenicand gas plantoperatingexperience DCS: Honeywell PKS,BaileyInfi 90,ABB Operate IT & EmersonDelta-V Supervisory &LeadershipQualities &Experience: Workedinleadershiprolesinplantoperations,commissioning&start-up,project interface/PTW/SimopscoordinationinAmmonia,Caprolactam, Gas/NGL processingincluding tank farmand storage & loadinginIndia,The Middle east(Qatar/UAE),RussiaandCanda. Workedin 7 managementpositionsinall fourprocessunitsatGas Processingdepartmentin Qatar Petroleum. Excellentpeopleskillsashave workedandleadmulticultural andmultilingualteamsincluding stakeholderengagementandbuyout Recruitment:Review&shortlistCVs,conducttelephoneandface toface interview forall positionsfromfieldoperatortoshiftforeman&mechanical commissioningleadatJBOG Personnel Management: Leave scheduling,motivating,developingprogressionplan,delegation, and on the jobtrainingtomove to higherpositions Conductedsafetywalkdownsandemergencydrills(Internal aswell asjointwithadjoining industry) andleadingduringemergencyasER team leader. Excellenttroubleshootingskills, suggestedplantchangesthatsaved>5 million$peryear as well asimprovingoperatingefficiency atNGLplants. ProficientwithMSOffice suite,SAP(Usedtodrive MOCprocessat Oilsands) ,Livelink, Sharepoint,Change management. Coordinatedoperational,maintenance activitiesinrunningplant.Projectinterface andSimops activitieswhile managingbrownfieldprojectsforoperationsdepartment. Prepared& trackedbudgetforCAPEXas well asOPEXitemsto ensure KPIsare metor exceeded for designatedarea.