The document provides an introduction to Oracle Application Testing Suite e-Load and its features for load testing web applications, including setting up virtual users and profiles, running load tests, and analyzing results. It describes how to configure e-Load settings for aspects like authentication, browser emulation, caching, and download management to simulate real user behavior under load.
This is a step-by-step guide on installing the WebLogic Server, starting the admin server, and accessing the admin console. We will need this later for our ATG Installation & Configuration step-by-step guide.
This is a step-by-step guide on installing the WebLogic Server, starting the admin server, and accessing the admin console. We will need this later for our ATG Installation & Configuration step-by-step guide.
This document is part of Oracle BI Publisher Certification Program from Adiva Consulting Inc. contact
info@adivaconsulting.com for you corporate training needs and reduce your training cost by 75%
This document is part of OBIEE 11g Training program from Adiva Consulting Inc.
Let we take care of your corporate training needs and you save 75% of on your Training budget.
Contact info@adivaconsulting.com
This document is part of Oracle BI Publisher Certification Program from Adiva Consulting Inc. contact
info@adivaconsulting.com for you corporate training needs and reduce your training cost by 75%
This document is part of OBIEE 11g Training program from Adiva Consulting Inc.
Let we take care of your corporate training needs and you save 75% of on your Training budget.
Contact info@adivaconsulting.com
It's a very basic introduction of Load Runner for beginners, i explored it at my own, prepared slides & shared it with my colleagues.
What is Load Runner & why we need Performance testing etc.
Enjoy :)
Q Engine is a powerful tool for automated functional and performance testing of your web applications and web services. Java based and hence platform independence in testing. No programming/script proficiency required to develop test cases.
HP LoadRunner software allows you to prevent application performance problems by detecting bottlenecks before a new system or upgrade is deployed. The testing solution LoadRunner enables you to test rich Internet applications, Web 2.0 technologies, ERP and CRM applications, and legacy applications. It gives you a picture of end-to-end system performance before going live so that you can verify that new or upgraded applications meet performance requirements
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...Ramesh Iyer
In today's fast-changing business world, Companies that adapt and embrace new ideas often need help to keep up with the competition. However, fostering a culture of innovation takes much work. It takes vision, leadership and willingness to take risks in the right proportion. Sachin Dev Duggal, co-founder of Builder.ai, has perfected the art of this balance, creating a company culture where creativity and growth are nurtured at each stage.
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024Tobias Schneck
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
Generating a custom Ruby SDK for your web service or Rails API using Smithyg2nightmarescribd
Have you ever wanted a Ruby client API to communicate with your web service? Smithy is a protocol-agnostic language for defining services and SDKs. Smithy Ruby is an implementation of Smithy that generates a Ruby SDK using a Smithy model. In this talk, we will explore Smithy and Smithy Ruby to learn how to generate custom feature-rich SDKs that can communicate with any web service, such as a Rails JSON API.
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Software Delivery At the Speed of AI: Inflectra Invests In AI-Powered QualityInflectra
In this insightful webinar, Inflectra explores how artificial intelligence (AI) is transforming software development and testing. Discover how AI-powered tools are revolutionizing every stage of the software development lifecycle (SDLC), from design and prototyping to testing, deployment, and monitoring.
Learn about:
• The Future of Testing: How AI is shifting testing towards verification, analysis, and higher-level skills, while reducing repetitive tasks.
• Test Automation: How AI-powered test case generation, optimization, and self-healing tests are making testing more efficient and effective.
• Visual Testing: Explore the emerging capabilities of AI in visual testing and how it's set to revolutionize UI verification.
• Inflectra's AI Solutions: See demonstrations of Inflectra's cutting-edge AI tools like the ChatGPT plugin and Azure Open AI platform, designed to streamline your testing process.
Whether you're a developer, tester, or QA professional, this webinar will give you valuable insights into how AI is shaping the future of software delivery.
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
Oracle Application Testing Suite: Introduction 12 - Key Concepts Several sessions may be needed to address the following: The application failed. Settings need to be tweaked. A newer version of the application is being run and regression testing is necessary.
Oracle Application Testing Suite: Introduction 12 - Using the Default Profiles Visual scripts recorded using e-Tester are default virtual user profiles. When you open a workspace in e-Load, any e-Tester visual scripts in that workspace appear in the default profiles list of the scenario tab in e-Load. You can include any e-Tester visual script in the scenario profiles list to play back visual scripts as virtual users.
Oracle Application Testing Suite: Introduction 12 - User-Defined Virtual User Profiles User-defined virtual user profiles allow you to combine multiple visual scripts as a single virtual user profile. User-defined profiles must be specifically defined in e-Load and appear in the user-defined profiles list of the scenario tab. In a user-defined profile, you can specify certain visual scripts to use as prolog, epilog, and error scripts. You can also insert synchronization points into a user-defined profile.
Oracle Application Testing Suite: Introduction 12 - Creating a User Defined Profile To create a new user defined profile: Select “Manage > User Defined Profiles” to display the “User Defined Profile Manager.” Click “New” to display the Add User Defined Profile dialog box. Select the repository where the workspace containing your visual scripts are located. Select the workspace where your visual scripts are located. The available visual scripts appear in the box below these fields. Enter a name for the job in the name field. Select the section in the tree where you want to add a visual script. Double-click the visual script in the left-hand pane's list to add to the section or Select the script and click the “Add” button. Use the up and down arrows to move scripts in the section pane. Repeat these steps to add more visual scripts to the sections tree. Add synchronization points as necessary. Click OK. Click OK to exit the User Defined Profile Manager.
Oracle Application Testing Suite: Introduction 12 - Adding Visual Scripts Select the section in the tree where you want to add a visual script. Double-click the visual script to add to the section or select the script and click the “Add” button. The visual script appears as a node of the tree.
Oracle Application Testing Suite: Introduction 12 - Adding Synchronization Points Select the section in the tree where you want to add a synchronization point. Click on the “Add Sync” button to add a synchronization point. The synchronization point appears as a node of the tree
Oracle Application Testing Suite: Introduction 12 - Creating Scenario Profiles Multiple profiles can be added to a scenario. In addition, multiple instances of profiles can be added to a scenario. Although the same script may be added many times, each instance has it’s own set of attributes. This means each instance of a profile can be completely unique.
Oracle Application Testing Suite: Introduction 12 - Number of Virtual Users (per profile) Number of Virtual Users - specifies the number of virtual users to run for the selected profile. For each virtual user, e-Load runs a separate instance of the visual scripts specified in the virtual user profile.
Oracle Application Testing Suite: Introduction 12 - Delay Between Iterations Delay Between Iterations - specifies the amount of time (in seconds) to wait between iterations of virtual user runs. You specify the number of iterations using the autopilot.
Oracle Application Testing Suite: Introduction 12 - Virtual User Pacing Virtual User Pacing - specifies the visual script playback delay for each virtual user. There are four options: Recorded - uses the delay times that were recorded in the e-Tester Visual Script. You can set minimum and maximum delay times (in seconds) that override the visual script delay times in the “Minimum” and “Maximum” edit boxes. Recorded/Rnd - uses random delay times based upon the recorded user delay. e-Load sets the low end of the random range as the actual user delay minus the lower percentage setting. e-Load sets the high end of the random range as the actual user delay plus the Upper percentage setting. For example, if the actual recorded delay time was 100 seconds and the lower and upper settings are 10% and 25% respectively, e-Load uses random delay times between 90 and 125 seconds. Random - uses random times for virtual user pacing. You can set minimum and maximum delay times for random delay in the minimum and maximum edit boxes. No Delay - plays back the visual scripts at the fastest possible speed. Because this will request pages faster than a normal user could, it will become extremely difficult to make a correlation between the number of virtual users and actual users. This should only be used for volume testing where transaction speeds are the important factor, not virtual users.
Oracle Application Testing Suite: Introduction 12 - Workstation Workstation - specifies the machine on which the virtual users will run. When running virtual users across workstations on a LAN/WAN, enter the machine name of a workstation running either e-Load controller or e-Load agent. Initially, you must setup the virtual user agent under “Manage > Systems > VU Agent Systems.” Once the names have been specified, you can select the workstation name from the drop-down list for future load tests.
Oracle Application Testing Suite: Introduction 12 - Creating New Workstations Groups may be submitted so in the Scenario Tab to easily disperse load To add a new system group: Select Manage > Systems. Select VU Agent System Groups. Click New to display the Add System dialog box. Enter the name of the group in the Name field. Select the systems you want to add from the Systems list. Click OK.
Oracle Application Testing Suite: Introduction 12 - Configure all Parameters Click on Configure all Parameters to add additional settings to the profile.
Oracle Application Testing Suite: Introduction 12 - Browser Emulation Browser Emulation - specifies the type of browser to emulate. There are various IE and Netscape and Firefox browsers available. In addition, AOL, Opera, and WebTV can be simulated. Because header information is being modified to simulate these different browsers, the browsers do not need to be installed on the test generation computer. Any browsers not available may be added through the Options > Custom Browser Menu Option.
Oracle Application Testing Suite: Introduction 12 - Custom Browsers New - displays a new line in the table. Delete - deletes the selected browser. Name - any name for the customized browser emulator. This name will appear in the browser emulation list in the “Edit Scenario Details” dialog box. User Agent String - specifies the string to send to the server as the user agent header string for the customized browser emulator.
Oracle Application Testing Suite: Introduction 12 - Connection Speed Connectin Speed - specifies the line speed to simulate for the virtual user’s Internet connection. Set the speed to a specific number if you want the virtual user to simulate a dial-up connection using a modem, DSL, or other speed. Set the speed to True Line Speed if you want the virtual user to run using the actual connection speed. 4.8 and 9.6 Kbs are for WAP telephones. 14.4, 28.8, 33.6, and 56 Kbs are for modem users. 64 and 128 Kbs are for ISDN users. 256, 384, and 512 Kbs are for DSL and Cable Modem Users. Reduced speeds are used in conjunction with true line speed and help determine how slower connections are handled when the application is under load. In a 1000 user test 998 users would run at true line speed, 1 user at 512k and another at 56k.
Oracle Application Testing Suite: Introduction 12 - Caching Type Caching Type - specifies the type of user to simulate. This is useful for simulating different profiles of virtual users. A first time user places more of a load on the web server because pages and image are not yet cached. A repeat user places less of a load on the server as only newer pages are requested and brought down from the Web server. There are three options: No not cache - no information is stored in the browser cache between or during an iteration. First Time User - the virtual users are considered to be using the Web site or application for the first time. Repeat User - the virtual users are considered to have visited or used the Web site or application previously. Pages and images are retrieved from the cache.
Oracle Application Testing Suite: Introduction 12 - User Mode User Mode - the mode in which to run e-Load virtual users. The following options are available: Thick Client - the virtual users run using full browser capabilities. This mode requires more resources and is less scalable than thin client, and should only be used in very rare cases such as Java applets that do not communicate to the server via HTTP. Thin Client - a less resource intensive method that provides a high level of web compatibility and visual script verification. Thin client mode consumes fewer system resources per process than thick client, and is able to run more virtual users on a given agent workstation. Java Client - a highly scalable version of the thin client that executes a compiled e-Tester script in native Java code. This agent provides a flexible code interface for performing customized scripting operations. This option is not available unless the script was saved with Java agent settings enabled in e-Tester.
Oracle Application Testing Suite: Introduction 12 - Use IP Spoofing Use IP spoofing - e-Load will use different IP addresses for virtual user agents. Each virtual user must get a defined IP address. You must define the IP addresses available for use by e-Load agents in the TCP/IP network protocols of the workstation. All IP addresses must be added to each agent workstation.
Oracle Application Testing Suite: Introduction 12 - Use Download Manager Use Download Manager – turns on download of specified objects in the download manager which is found in “Options > Download Manager.” The objects are downloaded and can be optionally reported on.
Oracle Application Testing Suite: Introduction 12 - Download Rules These options let you specify which types of objects to download in e-Load thin client user mode. You can specify background images, ActiveX, CAB, JAR, CSS, Flash, Applets, and JavaScript library files. To specify objects, define the HTML tags and attributes to use to filter references from other HTML in the page source. Filtering is enabled when the “Use Download Manager” option is selected for the “Edit Scenario Details” dialog box. The grid on the right side of the dialog box lists existing filters. The following options are available: New - adds the new filter to the existing filters list. Delete - removes the currently selected filter from the existing filters list. Existing Filters grid fields - lists the following information for the defined download filters. Tag Name - specifies the selected HTML tag. Enabled - shows if the filter is enabled or disabled. Filters marked as true are enabled and will be used to download objects. Attr Name - specifies the selected attribute used to identify which specific tag among all tags of the same tag name. Attr Value - specifies the value for the specified attribute name used to identify which specific tag.
Oracle Application Testing Suite: Introduction 12 - Download Rules (continued) Download Attr - specifies which attribute identifies the file to download. Filter Configuration - defines specific filter options to use for each download filter. The filter options identify specific tags and attributes in the HTML source that reference the object(s) to download. Set the following options and click “New” to add the filter to the existing filters list. Tag Name - specifies the HTML tag to use to locate an object within the HTML source. Enabled - select true to enable the filter. You can add filters to the existing filters list even if they are not enabled. You can select filters in the existing filters list at any time to enable or disable them for specific tests. Attr Name - specifies the name part of the name/value pair that identifies the specific Tag among all tags of the same tag name. Select the attribute name to use to identify the tag(s) in the HTML source. Attr Value - specifies the value part of the name/value pair that identifies the specific Tag among all tags of the same tag name. Specify the attribute value to use to identify the tag(s) in the HTML source. Download Attr - specifies the tag attribute that identifies the object to download. For example, IMG tags reference the image filename using the SRC attribute. To modify a filter, select it, then make changes using these fields. The changes automatically appear in the existing filters list.
Oracle Application Testing Suite: Introduction 12 - Databank Control To use the Data Bank control: Add a visual script or profile that uses a data bank to the configure parameters of the scenario list. Click the “Edit Scenario Details” button. In the main section, set the “Use Data Bank” field to “True.” Select other scenario profile options as needed to configure how each e-Load agent uses data bank records. Click “OK” to exit the dialog box. Click the “Configure Databank” button. Make sure the script or profile is selected in the tree view. Use the arrow buttons or enter a record number in the “Set/View Record #” field. Click “OK.”
Oracle Application Testing Suite: Introduction 12 - VU Display VU Display Ready – Automatically launches the VU display and shows the HTML of different VU’s at different times. This should only be used to verify a load script and should never be used when performing a load test.
Oracle Application Testing Suite: Introduction 12 - Execute User Defined Test Cases Execute User Defined Tests - when selected, e-Load runs e-Tester text matching and server response tests in thick client user mode. This option is only enabled when thick client user mode is selected.
Oracle Application Testing Suite: Introduction 12 - Generating Page Timers Auto generate timers for all pages - when selected, e-Load automatically add timers for each visual script page for reporting. The timers are used in e-Reporter to provide performance monitoring and timing information for each page of the visual scripts played back by a virtual user profile.
Oracle Application Testing Suite: Introduction 12 - Using the Autopilot Observe app performance – ramp needs to be slow enough and stay at one level long enough Focus on performance – ramping up too slow or fast may reduce your ability to recognize trends Settle – let app settle into the test.
Oracle Application Testing Suite: Introduction 12 - Start and Stop Settings Start - To specify a specific start time for Virtual Users: Specify Scenarios. Submit the scenario to the autopilot without starting. Set “Start the load test on the Set up Autopilot” tab to “At Specific Time.” Set the time to start in the form hh:mm:ss. Click the “Run Test” button. If you specify a start time other than when the start button is pressed, e-load displays the time remaining before the virtual user run starts in the status bar. Stop - To specify a specific stop time for Virtual Users: Specify Scenarios. Submit the Scenario to the autopilot without starting. Set the stop the load test time of the autopilot. Click the “Start Test” button. Once the autopilot starts running the virtual users, the run will continue until the stop time is reached.
Oracle Application Testing Suite: Introduction 12 - Virtual User Rampup To specify how many virtual users to start at a time: Specify a Scenario. Submit the Scenario to the Autopilot without starting. Set the “Add per step” option on the Configure tests tab. Set the “After” each option. Click the “Run Test” button. The autopilot starts the specified number or percentage of virtual users based on the after setting.
Oracle Application Testing Suite: Introduction 12 - Test Starts Observe application performance – ramp needs to be slow enough and stay at one level long enough Focus on performance – ramping up too slow or fast may reduce your ability to recognize trends Settle – let application settle. The first minute or two results can be misleading as it may take a little while for the application to get into momentum.
Oracle Application Testing Suite: Introduction 12 - Repositories Repositories are used to share scripts and files. Any shared directory can be used as a repository. New - adds a new entry to the table. Delete - deletes the selected repository. Name - enter the name of the repository. Path - enter the path of the repository.
Oracle Application Testing Suite: Introduction 12 - Session Start/Stop Specify default settings for how sessions start and end data collection using “Options > e-Load” and clicking “Start” and “Stop” in the session node. Define how a session starts - defines actions for a new session. Save data for reporting - specifies if virtual user data is saved for post testing analysis reports. There are three options: No - the virtual user data is not saved. Yes - the virtual user data is saved to the e-Reporter database. You can use e-Reporter at a later time to generate reports and graphs for analysis. Ask - e-Load prompts you to save the data each time you start a new autopilot session. Auto Assign Session Name - Will automatically create a new session name by combining the prefix with an 4 digit incremental number. Session Name prefix - gives a default session prefix name when starting a test.
Oracle Application Testing Suite: Introduction 12 - Session Start/Stop (continued) Define How a Session Ends Stop session on last VU completion - when selected, the session ends when the last virtual user has finished the run in the Autopilot. Stop attached session after browser closes - Terminate all agents at end of session - All e-Load agents automatically close when a session ends. Agent error handling - defines how to handle agents that encounter errors. Stop ramp-up on agent error - when selected, the autopilot stops submitting new virtual users if any virtual users fail to complete the initialization process. This may occur due to complications when starting the agent process or failures during e-Test script pre-run verification. This does not stop the test and previously running users continue to execute until the end of the session. Drop failed agents from session - The autopilot stops submitting new users to the agent machine that had the failure if a virtual users fails to start or is set to orphaned for any reason.
Oracle Application Testing Suite: Introduction 12 - Reporting Intervals Reporting data collection interval - specifies how often the aggregate e-Load agent performance data is collected for reporting to the e-Load database. User Interface refresh interval - specifies how often to redisplay reports in the view run graphs tab. Timer name format - specifies the format of page timer names for reporting purposes when “Auto-Generate Timers For All Pages” is selected. The following options are available: Automatic smart naming - this is the default naming convention, that is, MyScript.Page[2]. This setting disables the other four options. URL resource name - the base file name, that is, home.html is added. Frame name - the HTML frame name, that is, top, is added. Page number - the page number, that is, Page[2] is added. Profile name - the profile name, that is, MyScript is added.
Oracle Application Testing Suite: Introduction 12 - Scenario Defaults Each setting in the right panel has two columns: Checkboxes – Any checked, box will display the option on the build scenarios tab. Values set in each field in this dialog will automatically preset when scenarios are selected. For example, if you commonly run 100 VU load test, change the number “# VU’s” field to 100 in this screen. When a scenario is selected, the number of VU’s will be preset to 100.
Oracle Application Testing Suite: Introduction 12 - e-Load Results The “Performance Statistics” screen allows the user to see many different types of metrics. For instance, the user can see how many pages/second have been requested or how many transactions (script iterations)/second are currently executing. It’s also interesting to know exactly how many virtual users are executing in order to help put some of those numbers into perspective. Other important numbers include the totals for numbers of users, total transactions, and total pages requested. In addition to those numbers, the tester can see how long the script is taking to execute and how long each page takes to execute. This can point to specific pages as probable bottlenecks. Finally, the tester can also look to see the average amount of time the script took to execute given a quantity of executing users.