1. Rajashekharan Mahendar LAL
Contact Num : +971504636477
e-mail: - rajam99@gmail.com
PLANNING ENGINEER
14 years of experience
EXECUTIVE SUMMARY
Professional experience:
 Experienced and result oriented professional with more than 14 years of experience in Project Management
execution for EPC projects 12 years, and 4 years in Planning, Scheduling, Monitoring, MIS, Material in
“Planning & project control”
Key Skills
Planning/Project Control Skills Leadership and Operational
Skills
Cross Functional Skills
 Prepare and maintain L3 and
L4 construction Schedules
 Monitoring construction progress
through Progress Measurement
System (PMS) for complete
EPC Project.
 Estimate & analyse manpower.
 Commodity reports preparation.
 Review Monthly progress with
upper management
 Ensuring Project time lines are
met and variances are reduced
 Optimise shop capacity based
on current infrastructure.
 Set productivity targets based
on priority.
 Opening Work front & ensuring
liquidation as per specified
quantity & quality
 Liaise with various Sub-
Contractor teams on the
project
 Engaging with various
construction leads to verify
progress and identify
showstoppers and risks.
 Report project progress to
engineering leads and
provide visibility to critical
deliverables through regular
meetings
WORK EXPERIENCE
4/2016 – Current SPIE OIL & GAS LLC SUB CONTRCT ( SIEMENS )
PLANNING ENGINEER
Client - : POWER NETWORK UPGRADE PROJECT at BAB/BUHASA/ASAB M/s ADCO, UAE
Project:- Upgrading the Power Network at Buhasa, Scope Included Demolition of existing Substation and Building a
New Substation and STATCOM Building SCMS, Control and Protection System, LDC, FMS
Role & Responsibilities:
 Prepare and update Project Schedules, evaluating progress and variances
 Maintaining Construction register system in excel
 Preparing Weekly Progress report, three week look ahead for upper management & client submission
 Highlighting progress variances risks and recovery plan to mitigate variances
.12/2014 – 03/2016
PETROFAC EMIRATES LLC
PLANNING ENGINEER
Client - : Expansion of BAB Gas compression M/s ADCO, UAE
1 | P a g e

2. Rajashekharan Mahendar LAL
Contact Num : +971504636477
e-mail: - rajam99@gmail.com
Project:- EPC of New Gas Compressor Station CS-4, modification of three existing Compressor Stations (CS-1, 2 & 3)
and upgrade the Gas gathering network by extension of two remote Manifold Stations (RMS-2 & 3), installation of new
Direct Gathering Manifold (DGM-2)
Role & Responsibilities:
 Prepare and update Project Schedules, evaluating progress and variances
 Maintaining Construction register system in excel
 Preparing Weekly Progress report, three week look ahead for upper management & client submission
 Highlighting progress variances risks and recovery plan to mitigate variances
 Estimate and analysis of manpower, scheduling, and resource updates
 Preparing progress S curve and commodity curves & Resource Histogram development
09/2012 – 05/2013
OSMAK E&C LLC - SUB-CONTRACTS ( PETROFAC EMIRATES LLC , UAE )
PLANNING & PROJECT CONTROLS
Client - : ASAB Full Field Development Project of M/s ADCO, UAE
Role & Responsibilities:
 Prepare and update Project Schedules, evaluating progress and variances
 Maintaining Construction register system in excel
 Preparing Weekly Progress report, three week look ahead for upper management & client submission
 Monitoring the progress and comparing with the planned program
 Baseline and actual achieved through ‘S’ curve, with pie chart and bar graphs.
 Preparation of commodity reports.
 CDS Shut down schedule development, updating and co-ordination by attending meetings.
12/2005 – 08/2012
ROYAL CONSTRUCTION ( EPC CONTRACTORS )
PLANNING ENGG & SITE IN CHARGE
Client - : ESSAR OIL LIMITED (VADINAR-GUJARAT), REFINERY
Role & Responsibilities
 Responsible for planning functions
 Highlight critical issues to the management and ensure timely completion of fabrication activities.
 Identification of changing priorities as per the project requirements and updating the same in schedules.
 Reporting Work front requirement, and spools in fabrication to Client Shop Manager
Role & Responsibilities
 Site In charge for Pipe spools Fabrication
 Getting Job requirement and having toolbox talk with team and handing over responsibilities to all concerned.
 Responsible for co-ordination with Engineering department and Material department
 Ensure that Spools are prioritized based on plant requirement.
 Conversant with fittings used in spool manufacturing.
2 | P a g e

3. Rajashekharan Mahendar LAL
Contact Num : +971504636477
e-mail: - rajam99@gmail.com
 Knowledge in fabrication of pipe for various materials like CS, LTCS, AS, SS. NACE, IBR as per isometrics
drawing.
 Conversant with ASME standards like B31.3 for process piping.
05/2002 – 11/2005 PATEL ENGINEERING CONSTRUCTION ( EPC CONTRACTORS )
IN CHARGE FOR PIPE SPOOL FABRICATION
Client - : L & T LIMITED (HAZIRA-GUJARAT), REFINERY
Role & Responsibilities:
 As an independent in charge handling a fabrication unit at Hazira Surat.
 Hands on experience in overseeing pipe spool fabrication both AG and UG Piping and familiar with spools
fabrication process from material identification/fit up stage to dispatch the pipe spool to concern area.
 Familiar with various types of materials like Carbon steel, Alloy steel and Stainless steel includes NACE, LTCS
and IBR spool verifications.
 Familiar with daily used tools/machines operation
 Familiar with various manual automatic and semi-automatic welding processes like SMAW GTAW, FCAW and
SAW
 Conducting meeting with various departmental personnel like maintenance, stores, planning, engineering &
material control on regular basis for smooth functioning of system and workflow.
 Ensuring safety to all the shop floor personnel wearing PPE, housekeeping & scrap management
07/2000 – 04/2002 GALAXY MACHINES, HYDERABAD
MARKETING ENGINEER
Role & Responsibilities:
 Directly responsible for business development, handling a team of 2 Engineers
 Prospecting for clients for special purpose machines
07/1997 – 06/1998
SHREE ENGINEERING CORP LTD, HYDERABAD
SALES ENGINEER
Role & Responsibilities:
 Responsible for direct sales activity
 Meeting prospective clients for air compressors/water chillier requirements
SOFTWARE SKILLS
 PRIMAVERA PROJECT PLANNER P6 ver-7
 MS OFFICE
LANGUAGE PROFICIENCY
 English, Hindi, Tamil, Telugu, Kannada
EDUCATION
 Master in Business Administration (MBA), Osmania University (OU) – INDIA - 2000
 Bachelor of Engineering (Mechanical Engineering), Osmania University ( OU ) INDIA - 1997
3 | P a g e