This document discusses environmental technology for induction heaters, cooling towers, and heat exchangers. It provides information on applications and installations from 2002 to present, operating principles, advantages of various components, maintenance considerations, and retrofitting or replacement options. Key points covered include plume suppression, safety, low noise output, exchange surfaces that are removable and cleanable, draining basins without water holding areas, and longevity even with dirty systems.

1. Environmental Technology

6. 3000 kW < 50 dB(A) to10 m
plume suppression and
safety legionella

7. Induction heater ‐ 2 VAPF 323 : 4000 kW

10. APPLICATIONS

11. 6 x 1800 kW

12. 6 x 2000 kW

13. APPLICATIONS

14. APPLICATION
S
Installed in 2002
Installed in 2004

15. APPLICATIONS

16. APPLICATIONS

17. APPLICATION
S

18. APPLICATIONS

39. APPLICATIONS
Jacir technology
benefits

40. APPLICATIONS
Exchanger symmetrical steel plates and gaskets clipped
All exchange surfaces are removable and cleanable
Entirely antifreeze Towers without glycol
RC Filter ® cleanable self cyclone devolution
Completely draining basin
No water holding area
Conservation performance even with dirty infill
Low noise and low power consumption

41. Exchanger room

42. APPLICATIONS
Large access door
to exchanger room

43. Pool accessible without retention areas and grip

44. APPLICATIONS
Protective cover
Level sensors

45. APPLICATIONS
No roughness, no retention areas
Complete draining, sloping bottom
Accessibility for easy cleaning
Position of the bottom drain below the pelvis

46. APPLICATIONS
Immediate access to exchange body

47. APPLICATIONS
Blowdown
valve ball
valve
The inductive
conductivity sensor
Exogel

48. APPLICATIONS
Centrifugal filter FRC
JACIR patent

49. Advantages :
50% energy saving on the annual pump consumption
ROI 6 to 8 months
Option installed and pre‐wired: Plug and Play with regulation adapted to the operating mode
(economic criteria water or electricity)
Extending pump life and reducing maintenance costs associated with wear parts.
PRATICE :
Pre shift adjustment in factory.
Full integration at the local exchange
Possibility to adapt the change to a specific need.
Key removable memory according to reprogram the stored model.
Closed towers and
frequency drive

50. BA
Text
TF
operating principle:
LEGEND:
A: frequency ventilation
TF: cold water temperature side
process B: frequency pump
Text: outside air temperature.
Two regulation level :
Pump control only: when the outdoor temperature drops, it reduces the flow of the pump (in the proper
range to maintain the turbulent regime)
Pump control and ventilation: the regulation on the pump is coupled to the ventilation and controlled by
the temperature of the cold water process circuit.

51. APPLICATION
S
10 guaranty
Option price of 304L
Applicable to all metal towers
Pitting potential on industrial surfaces in various media
Free potential
50
150
250
350
450
550
650
750
850
950
0,25 g/l, 23°C 1 g/l, 23°C 0,25 g/l, 80°C 1 g/l, 80°C
Chloride / Temperature°C
Epit (mV/SCE)
duplex
316L
X STEEL
304L

52. Spare parts :
Revamping department

53. Establishment of a stainless steel plates
heat exchanger and adaptation of existing
open towers

54. Nozzles for chemical
cleaning
easy disassembly

55. Scaling by simple
deformation
Washable 75 ° C
Exchange surfaces

57. Certified and guaranteed minimum efficiency : 0,01%

59. markup
sheeting
Removing interior elements
Removal of rubble
Waste reprocessing

60. APPLICATIONS
exterior cladding

61. internal coating
Epoxy resin
steel and concrete

62. internal coating
Epoxy resin
steel and concrete

63. Large access doors
creation

64. Creation and
adaptation of
large access
doors

66. APPLICATIONS

80. APPLICATIONS

81. APPLICATIONS

88. Available in 24h
Adaptation to thermal
installation requirements