Iot based home automation system for electricity usageIJARIIT
One of the important scientific discovery of all time is of electricity. Electricity has many uses in our day to day life and
provides comfort to people. The existing system for Electricity meter reading has many drawbacks such as real time data is not
available, huge human resource requirement, difficulty in construction etc. This research proposes an IOT based system to
overcome drawbacks and provide additional benefits. The proposed system uses Arduino microcontroller, to read the no of units
consumed by electrical appliances. These data is than send to a remote server using Ethernet shield. At the user end, an android
application is created which allows the user to fetch data in real time and represent it graphically. In an effort to overcome the
energy crisis, these systems send an SMS to the user when his/her home electricity usage crosses a threshold. To notify the user
about his daily electricity usage a notification will be sent to the android application every day. The above system has been
designed to overcome drawbacks of the existing system, ease of accessing real time data and to reduce energy crisis.
Iot based home automation system for electricity usageIJARIIT
One of the important scientific discovery of all time is of electricity. Electricity has many uses in our day to day life and
provides comfort to people. The existing system for Electricity meter reading has many drawbacks such as real time data is not
available, huge human resource requirement, difficulty in construction etc. This research proposes an IOT based system to
overcome drawbacks and provide additional benefits. The proposed system uses Arduino microcontroller, to read the no of units
consumed by electrical appliances. These data is than send to a remote server using Ethernet shield. At the user end, an android
application is created which allows the user to fetch data in real time and represent it graphically. In an effort to overcome the
energy crisis, these systems send an SMS to the user when his/her home electricity usage crosses a threshold. To notify the user
about his daily electricity usage a notification will be sent to the android application every day. The above system has been
designed to overcome drawbacks of the existing system, ease of accessing real time data and to reduce energy crisis.
The challenging problem faced by quadriplegics and paralyzed people is their need for independent mobility. They need
external help to perform their daily activities. The main objective of this project is to provide an automated system for
disabled people to control the motor rotation of wheelchair based on neck movement of physically challenged person. To
facilitate these people for their independent movement, tilt sensor is fitted on person neck. Based on the neck movements,
the accelerometer (tilt sensor) will drive the motor fitted to the wheelchair. The wheel chair can be driven in any of the
four directions and it can also be controlled by using android app (Blynk app). The automated wheelchair is based on
simple electronic control system and the mechanical arrangement that is controlled by a Controller. The ultrasonic
sensors help to avoid obstacles, using the environment information gathered during navigation. The temperature sensor
and heartbeat sensor constantly measure the parameters and display it on LCD.
In our paper several issues of sustainable transport is brought into the spotlight. In this fast paced world
everyone wants everything to happen just in the tick of a second and the wink of an eye. It is widely
acknowledged that traffic congestion threatens economic growth and irritates today’s pacing world. With
the increasing use of transport worldwide, it is necessary to derive solutions to ease traffic. Moreover
transportation now accounts for about 40 per cent of the total use of energy in the world. As a result, there
is an increased focus on how best to make it easier and more attractive for people to use public transport.
For the last two decades IT (Electronics + Computer) has been positioned as the instrument for travel
substitution. IT has been successful in all fields it has been applied to. Similarly it would definitely be a
great help to the strange challenge that transport poses on environment. There are three main things which
we must concentrate on congestion avoidance, accident avoidance,driver assistance and automize only in
needed situations with zone detection. it is much more important in this present day to derive a method
for disabled personalities to drive with ease. Developing special vehicles discriminate them from the
normal man and also it may not be cost feasible. Our project will be a globalised solution which will be
applicable to mankind of all categories. It may be applied to any nation (developed, developing or under
developed).We proudly state that it is location transparent. Every nation has started their development
process in ITS. ITS USA has announced that they expect the industry to be fully grown by 2030 and we
hope that ours would be a small contribution to the world ITS.
Traffic Monitoring and Control System Using IoTijtsrd
This research aims to monitor the traffic condition and to control the traffic light. This system can reduce not only traffic congestion but also waiting time. This system is designed to be implemented in places nearing the junctions. This research is based on the effective use of Internet of Things IoT . This system will display the traffic conditions in the website and the traffic light can be controlled from this website. This system has been implemented by using esp8266, ultrasonic sensor and arduino. Esp8266 nodemcu which is IoT device is used to transmit the traffic information to the website which is connected with this device. Ultrasonic sensors are placed on each road to sense the presence and absence of vehicles. Traffic information is received from these sensors. Traffic light prototype is built by using an arduino UNO. This traffic light can be controlled from the website. The system will display the traffic states in the website that can guide the drivers to select the right way and avoid traffic congestions. Ei Swe Zin | Kyaw Zin Latt ""Traffic Monitoring and Control System Using IoT"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019, URL: https://www.ijtsrd.com/papers/ijtsrd25138.pdf
Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/25138/traffic-monitoring-and-control-system-using-iot/ei-swe-zin
The challenging problem faced by quadriplegics and paralyzed people is their need for independent mobility. They need
external help to perform their daily activities. The main objective of this project is to provide an automated system for
disabled people to control the motor rotation of wheelchair based on neck movement of physically challenged person. To
facilitate these people for their independent movement, tilt sensor is fitted on person neck. Based on the neck movements,
the accelerometer (tilt sensor) will drive the motor fitted to the wheelchair. The wheel chair can be driven in any of the
four directions and it can also be controlled by using android app (Blynk app). The automated wheelchair is based on
simple electronic control system and the mechanical arrangement that is controlled by a Controller. The ultrasonic
sensors help to avoid obstacles, using the environment information gathered during navigation. The temperature sensor
and heartbeat sensor constantly measure the parameters and display it on LCD.
In our paper several issues of sustainable transport is brought into the spotlight. In this fast paced world
everyone wants everything to happen just in the tick of a second and the wink of an eye. It is widely
acknowledged that traffic congestion threatens economic growth and irritates today’s pacing world. With
the increasing use of transport worldwide, it is necessary to derive solutions to ease traffic. Moreover
transportation now accounts for about 40 per cent of the total use of energy in the world. As a result, there
is an increased focus on how best to make it easier and more attractive for people to use public transport.
For the last two decades IT (Electronics + Computer) has been positioned as the instrument for travel
substitution. IT has been successful in all fields it has been applied to. Similarly it would definitely be a
great help to the strange challenge that transport poses on environment. There are three main things which
we must concentrate on congestion avoidance, accident avoidance,driver assistance and automize only in
needed situations with zone detection. it is much more important in this present day to derive a method
for disabled personalities to drive with ease. Developing special vehicles discriminate them from the
normal man and also it may not be cost feasible. Our project will be a globalised solution which will be
applicable to mankind of all categories. It may be applied to any nation (developed, developing or under
developed).We proudly state that it is location transparent. Every nation has started their development
process in ITS. ITS USA has announced that they expect the industry to be fully grown by 2030 and we
hope that ours would be a small contribution to the world ITS.
Traffic Monitoring and Control System Using IoTijtsrd
This research aims to monitor the traffic condition and to control the traffic light. This system can reduce not only traffic congestion but also waiting time. This system is designed to be implemented in places nearing the junctions. This research is based on the effective use of Internet of Things IoT . This system will display the traffic conditions in the website and the traffic light can be controlled from this website. This system has been implemented by using esp8266, ultrasonic sensor and arduino. Esp8266 nodemcu which is IoT device is used to transmit the traffic information to the website which is connected with this device. Ultrasonic sensors are placed on each road to sense the presence and absence of vehicles. Traffic information is received from these sensors. Traffic light prototype is built by using an arduino UNO. This traffic light can be controlled from the website. The system will display the traffic states in the website that can guide the drivers to select the right way and avoid traffic congestions. Ei Swe Zin | Kyaw Zin Latt ""Traffic Monitoring and Control System Using IoT"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019, URL: https://www.ijtsrd.com/papers/ijtsrd25138.pdf
Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/25138/traffic-monitoring-and-control-system-using-iot/ei-swe-zin
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.