Modeling and Design of High Rise Statue of Lard Shree Ram using Staad Pro Sof...ijtsrd
Integrating design processing using various designing and modelling software's in high rise sculpture creates new opportunities for aesthetics discovery. These technologies enable artists to make high rise sculptures and provide safety, modify and disseminate art and make possible a new type of work.By using a behaviour based software architecture to control a sculptures movement, complex series of coordinated motion can be performed in response to the sculpture's environment and in relation to its internal state .Adding behaviour to sculpture changes the conversation between people and sculpture. As people directly influence the movement of sculpture, the results of this conversation can be stored by sculpture and used to modify the course of future interaction and behaviour. It provides the foundation of a new dialogue between the sculptor, sculpture and the audience. MD. Hashmi | Pratiksha Malviya "Modeling and Design of High-Rise Statue of Lard Shree Ram using Staad-Pro Software" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd27912.pdfPaper URL: https://www.ijtsrd.com/computer-science/other/27912/modeling-and-design-of-high-rise-statue-of-lard-shree-ram-using-staad-pro-software/md-hashmi
Modeling and Design of High Rise Statue of Lard Shree Ram using Staad Pro Sof...ijtsrd
Integrating design processing using various designing and modelling software's in high rise sculpture creates new opportunities for aesthetics discovery. These technologies enable artists to make high rise sculptures and provide safety, modify and disseminate art and make possible a new type of work.By using a behaviour based software architecture to control a sculptures movement, complex series of coordinated motion can be performed in response to the sculpture's environment and in relation to its internal state .Adding behaviour to sculpture changes the conversation between people and sculpture. As people directly influence the movement of sculpture, the results of this conversation can be stored by sculpture and used to modify the course of future interaction and behaviour. It provides the foundation of a new dialogue between the sculptor, sculpture and the audience. MD. Hashmi | Pratiksha Malviya "Modeling and Design of High-Rise Statue of Lard Shree Ram using Staad-Pro Software" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd27912.pdfPaper URL: https://www.ijtsrd.com/computer-science/other/27912/modeling-and-design-of-high-rise-statue-of-lard-shree-ram-using-staad-pro-software/md-hashmi
Analysis of Shear Live Load Girder Distribution Factors in Integral bridges u...IJCMESJOURNAL
This paper studies the accuracy of AASHTO Standard Specifications and AASHTO LRFD design specifications girder distribution factors (GDFs) equations and their applicability to integral abutment bridges (IABs). A three-dimensional (3D) finite element (FE) model of the Scotch Road integral abutment bridge was developed using the finite element software ABAQUS/Cae. The bridge was subjected to vehicular live loading in single and multiple lanes in the FE model(s). The FE model was calibrated using load-displacement data obtained from field testing due to static truck loading. A comparison between the GDFs obtained from the FE models to those computed using both design codes was performed to evaluate their accuracy. A limited parametric study was conducted to evaluate crucial design parameters such as bridge deck thickness, span length, and piles lengths. The results showed that AASHTO LRFD GDFs equations are more conservative compared to those of AASHTO LFD equations in all cases. However, GDFs from the FE models compared more favorably to those calculated based on both design codes for the case single lane loading.
Sustainable Solution for Shoring Method of Cross-Creek Bridge in Ankeng MRT S...Dr. Amarjeet Singh
In the Ankeng Light Rail MRT system (ALRMS) project, the U7 box girder passes crossing the Erbads creek and needs a temporary supporting system for the construction work. In this study, three temporary shoring system options were proposed to be the construction method. The D-B Contractor, New Asia construction and Development Corporation, evaluated and selected the optimal choice, The Steel truss frame with supporting beams, to serve as the temporary supporting system. Compare the deflection of Δmax and Δactual, which are 1.609 cm and 1.59 cm, respectively. This result presented that the shoring system composed of the H912*302*18*37 supporting beams and steel truss frame had achieved outstanding performance and work to construct the U7 box girder. This paper presents how the three options are evaluated and the detailed construction processes along with the survey verification for the method.
Analysis of rc bridge decks for selected national a nd internationalstandard ...eSAT Journals
Abstract
The paper presents the comparison of the effect of different standard loadings on a set of reinforced concrete bridge decks using the
finite-element method. The parameters investigated include the aspect ratio (span/width) and type of loading. The investigations are
conducted on two lane slab bridge decks of span 5m to 9.5m and two lane T beam bridge decks of span 7.5m to 20m. A total of 36
bridge models were analyzed. The variation of different critical structural response parameters such as deflection, longitudinal
bending moment, transverse moment, shear force and torsional moments are evaluated for IRC loading (IRC Class A and 70R
loadings), AASHTO loading (HL93) and Euro standard loading (LM1). The results shows that the maximum difference in deflection
and longitudinal bending moment for the two IRC standard loading ranges from 5 to 15%. While the difference between
corresponding values for the AASHTO loading in the range of 5 to 17%. The maximum axle load of euro standard loading is found to
be 2.2 times higher than IRC class A loading maximum axle load hence the values of structural response parameters are increased by
1.7 to 1.8 times. Therefore there is a need for adopting simplified and more realistic standard loads in the future.
Keywords: Bridges, Concrete deck slabs; Finite element method; T-beam bridge decks; Aspect ratio; Live load, IRC code,
AASHTO code and Euro code.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
As catastrophic bridge collapse accidents not only cause significant loss of property, but also have a severe social impact. Therefore, the structural health monitoring of bridges for damage detection by vibration analysis gets more attention. Reinforced concrete bridges are the most common and extended structures present in the worldwide. These structures are often characterized by Piers, Abutments, deck slabs. This paper looks on the work of modelling and analysis of bridge in STAAD.Pro software, and the specific bridge model is taken of a particular span. It is subjected to vary Young’s modulus (E) in the mid span of bridge deck slab to induce damage in order to obtain maximum bending moment, as the structural strength reduces. From the analysis Mu/bd2 values from SP 16 code is used to identify the damage on the bridge deck slab, then natural frequency of the bridge, mode shapes, variation of the deflection and node displacements of bridge deck slab under the action of static and dynamic load at different aspect ratios with original design parameters and at failure is carried out in this project.
Analysis of Shear Live Load Girder Distribution Factors in Integral bridges u...IJCMESJOURNAL
This paper studies the accuracy of AASHTO Standard Specifications and AASHTO LRFD design specifications girder distribution factors (GDFs) equations and their applicability to integral abutment bridges (IABs). A three-dimensional (3D) finite element (FE) model of the Scotch Road integral abutment bridge was developed using the finite element software ABAQUS/Cae. The bridge was subjected to vehicular live loading in single and multiple lanes in the FE model(s). The FE model was calibrated using load-displacement data obtained from field testing due to static truck loading. A comparison between the GDFs obtained from the FE models to those computed using both design codes was performed to evaluate their accuracy. A limited parametric study was conducted to evaluate crucial design parameters such as bridge deck thickness, span length, and piles lengths. The results showed that AASHTO LRFD GDFs equations are more conservative compared to those of AASHTO LFD equations in all cases. However, GDFs from the FE models compared more favorably to those calculated based on both design codes for the case single lane loading.
Sustainable Solution for Shoring Method of Cross-Creek Bridge in Ankeng MRT S...Dr. Amarjeet Singh
In the Ankeng Light Rail MRT system (ALRMS) project, the U7 box girder passes crossing the Erbads creek and needs a temporary supporting system for the construction work. In this study, three temporary shoring system options were proposed to be the construction method. The D-B Contractor, New Asia construction and Development Corporation, evaluated and selected the optimal choice, The Steel truss frame with supporting beams, to serve as the temporary supporting system. Compare the deflection of Δmax and Δactual, which are 1.609 cm and 1.59 cm, respectively. This result presented that the shoring system composed of the H912*302*18*37 supporting beams and steel truss frame had achieved outstanding performance and work to construct the U7 box girder. This paper presents how the three options are evaluated and the detailed construction processes along with the survey verification for the method.
Analysis of rc bridge decks for selected national a nd internationalstandard ...eSAT Journals
Abstract
The paper presents the comparison of the effect of different standard loadings on a set of reinforced concrete bridge decks using the
finite-element method. The parameters investigated include the aspect ratio (span/width) and type of loading. The investigations are
conducted on two lane slab bridge decks of span 5m to 9.5m and two lane T beam bridge decks of span 7.5m to 20m. A total of 36
bridge models were analyzed. The variation of different critical structural response parameters such as deflection, longitudinal
bending moment, transverse moment, shear force and torsional moments are evaluated for IRC loading (IRC Class A and 70R
loadings), AASHTO loading (HL93) and Euro standard loading (LM1). The results shows that the maximum difference in deflection
and longitudinal bending moment for the two IRC standard loading ranges from 5 to 15%. While the difference between
corresponding values for the AASHTO loading in the range of 5 to 17%. The maximum axle load of euro standard loading is found to
be 2.2 times higher than IRC class A loading maximum axle load hence the values of structural response parameters are increased by
1.7 to 1.8 times. Therefore there is a need for adopting simplified and more realistic standard loads in the future.
Keywords: Bridges, Concrete deck slabs; Finite element method; T-beam bridge decks; Aspect ratio; Live load, IRC code,
AASHTO code and Euro code.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
As catastrophic bridge collapse accidents not only cause significant loss of property, but also have a severe social impact. Therefore, the structural health monitoring of bridges for damage detection by vibration analysis gets more attention. Reinforced concrete bridges are the most common and extended structures present in the worldwide. These structures are often characterized by Piers, Abutments, deck slabs. This paper looks on the work of modelling and analysis of bridge in STAAD.Pro software, and the specific bridge model is taken of a particular span. It is subjected to vary Young’s modulus (E) in the mid span of bridge deck slab to induce damage in order to obtain maximum bending moment, as the structural strength reduces. From the analysis Mu/bd2 values from SP 16 code is used to identify the damage on the bridge deck slab, then natural frequency of the bridge, mode shapes, variation of the deflection and node displacements of bridge deck slab under the action of static and dynamic load at different aspect ratios with original design parameters and at failure is carried out in this project.
Analysis and Design of Reinforced Concrete Solid Slab Bridgeijtsrd
Structural planning and analysis is an art and science of designing with economy, elegance and sturdiness. Structural designing requires an in depth structural analysis on which the planning is predicted, to compete within the ever competitive market, the use of software can save many man hours and efforts in structural analysis and an effort was made in the present study to achieve this objective. The purpose of this study is to analyze and design the solid deck slab bridge by STAAD Pro and manual method under different loading conditions. And also, the analysis results in term of shear, bending moment, axial force and deflection were checked by STAAD Pro which is passes through many different load combinations. The maximum design moments resulting from the combinations of various loading cases.part 1 The study deals with the planning and analysis of Solid Deck Slab using Staad Pro software. In this study solid deck slab having 8.2 m long span and the thickness of slab 0.65 m and the slab is simply supported. The drafting and detailing work was completed using AutoCAD software and thereafter the entire design work was completed using “Staad Pro v8i ss6â€.Part 2 Manual analysis of load is compared preferably with the results of software and thus its concluded that Staad Pro is suitable tool that may save considerable time and gives sufficiently accurate results.Part 3 Comparison of Manual Calculation and also the analysis results in term of shear, bending moment, axial force and deflection were checked by STAAD Pro which is passes through many different load combinations. The maximum design moments resulting from the combinations of various loading cases. Singh Shubham Yashwant | A. K. Jha | R. S. Parihar "Analysis & Design of Reinforced Concrete Solid Slab Bridge" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-6 | Issue-5 , August 2022, URL: https://www.ijtsrd.com/papers/ijtsrd50691.pdf Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/50691/analysis-and-design-of-reinforced-concrete-solid-slab-bridge/singh-shubham-yashwant
Analysis of rc bridge decks for selected national a nd internationalstandard ...eSAT Journals
Abstract
The paper presents the comparison of the effect of different standard loadings on a set of reinforced concrete bridge decks using the
finite-element method. The parameters investigated include the aspect ratio (span/width) and type of loading. The investigations are
conducted on two lane slab bridge decks of span 5m to 9.5m and two lane T beam bridge decks of span 7.5m to 20m. A total of 36
bridge models were analyzed. The variation of different critical structural response parameters such as deflection, longitudinal
bending moment, transverse moment, shear force and torsional moments are evaluated for IRC loading (IRC Class A and 70R
loadings), AASHTO loading (HL93) and Euro standard loading (LM1). The results shows that the maximum difference in deflection
and longitudinal bending moment for the two IRC standard loading ranges from 5 to 15%. While the difference between
corresponding values for the AASHTO loading in the range of 5 to 17%. The maximum axle load of euro standard loading is found to
be 2.2 times higher than IRC class A loading maximum axle load hence the values of structural response parameters are increased by
1.7 to 1.8 times. Therefore there is a need for adopting simplified and more realistic standard loads in the future.
Keywords: Bridges, Concrete deck slabs; Finite element method; T-beam bridge decks; Aspect ratio; Live load, IRC code,
AASHTO code and Euro code.
Analysis of rc bridge decks for selected national a nd internationalstandard ...eSAT Journals
Abstract
The paper presents the comparison of the effect of different standard loadings on a set of reinforced concrete bridge decks using the
finite-element method. The parameters investigated include the aspect ratio (span/width) and type of loading. The investigations are
conducted on two lane slab bridge decks of span 5m to 9.5m and two lane T beam bridge decks of span 7.5m to 20m. A total of 36
bridge models were analyzed. The variation of different critical structural response parameters such as deflection, longitudinal
bending moment, transverse moment, shear force and torsional moments are evaluated for IRC loading (IRC Class A and 70R
loadings), AASHTO loading (HL93) and Euro standard loading (LM1). The results shows that the maximum difference in deflection
and longitudinal bending moment for the two IRC standard loading ranges from 5 to 15%. While the difference between
corresponding values for the AASHTO loading in the range of 5 to 17%. The maximum axle load of euro standard loading is found to
be 2.2 times higher than IRC class A loading maximum axle load hence the values of structural response parameters are increased by
1.7 to 1.8 times. Therefore there is a need for adopting simplified and more realistic standard loads in the future.
Keywords: Bridges, Concrete deck slabs; Finite element method; T-beam bridge decks; Aspect ratio; Live load, IRC code,
AASHTO code and Euro code.
Analysis of rc bridge decks for selected national a nd internationalstandard ...eSAT Journals
Abstract
The paper presents the comparison of the effect of different standard loadings on a set of reinforced concrete bridge decks using the
finite-element method. The parameters investigated include the aspect ratio (span/width) and type of loading. The investigations are
conducted on two lane slab bridge decks of span 5m to 9.5m and two lane T beam bridge decks of span 7.5m to 20m. A total of 36
bridge models were analyzed. The variation of different critical structural response parameters such as deflection, longitudinal
bending moment, transverse moment, shear force and torsional moments are evaluated for IRC loading (IRC Class A and 70R
loadings), AASHTO loading (HL93) and Euro standard loading (LM1). The results shows that the maximum difference in deflection
and longitudinal bending moment for the two IRC standard loading ranges from 5 to 15%. While the difference between
corresponding values for the AASHTO loading in the range of 5 to 17%. The maximum axle load of euro standard loading is found to
be 2.2 times higher than IRC class A loading maximum axle load hence the values of structural response parameters are increased by
1.7 to 1.8 times. Therefore there is a need for adopting simplified and more realistic standard loads in the future.
Keywords: Bridges, Concrete deck slabs; Finite element method; T-beam bridge decks; Aspect ratio; Live load, IRC code,
AASHTO code and Euro code.
Analysis of rc bridge decks for selected national and internationalstandard l...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.