This document provides information on JebChem's surface control additives and anti-foam products. It discusses common issues like foam formation, surface defects, and technologies used for surface control and anti-foaming. It then provides details on JebChem's product portfolio for anti-foam and surface control additives, including active ingredients, recommended dosages, and applications. Several product evaluations and test results are also presented, showing JebChem additives outperforming competitors in reducing foam, improving slip properties, and enhancing water repellency in coatings.
Manufacture of parenteral products and troubleshootingMostafaQalavand1
Parenteral administration of drugs by intravenous (IV), intramuscular (IM), or subcutaneous (SC) routes is now an established and essential part of medical practice.
Many important drugs are available only as parenteral dosage forms. Notable among these are numerous biotechnology drugs, insulin, several cephalosporin antibiotic products, and drugs such as heparin, protamine, and glucagon. In addition, other drugs such as lidocaine hydrochloride and many anticancer products are used principally as parenterals.
SAFETY METHODS IN PHARMACEUTICAL INDUSTRYssuser5a17b2
SAFETY METHODS IN PHARMACEUTICAL INDUSTRY
(a)
(b)
Mechanical, chemical and fire hazards problems.
Inflammable gases and dusts.
Please provide feed back
I Have completed this assignment in 5-6 hours . I am helping others student as well.
Filtration is any of various mechanical, physical or biological operations that separate solids from fluids by adding a medium through which only the fluid can pass. The fluid that passes through is called the filtrate.
explained about
Factors Affecting Filtration
Rate of filteration
Filter media
Classification of filter media
Industrial filters
A- Gravity filters. B- Vacuum filters
C- Pressure filters. D- Centrifugal filters.
Manufacture of parenteral products and troubleshootingMostafaQalavand1
Parenteral administration of drugs by intravenous (IV), intramuscular (IM), or subcutaneous (SC) routes is now an established and essential part of medical practice.
Many important drugs are available only as parenteral dosage forms. Notable among these are numerous biotechnology drugs, insulin, several cephalosporin antibiotic products, and drugs such as heparin, protamine, and glucagon. In addition, other drugs such as lidocaine hydrochloride and many anticancer products are used principally as parenterals.
SAFETY METHODS IN PHARMACEUTICAL INDUSTRYssuser5a17b2
SAFETY METHODS IN PHARMACEUTICAL INDUSTRY
(a)
(b)
Mechanical, chemical and fire hazards problems.
Inflammable gases and dusts.
Please provide feed back
I Have completed this assignment in 5-6 hours . I am helping others student as well.
Filtration is any of various mechanical, physical or biological operations that separate solids from fluids by adding a medium through which only the fluid can pass. The fluid that passes through is called the filtrate.
explained about
Factors Affecting Filtration
Rate of filteration
Filter media
Classification of filter media
Industrial filters
A- Gravity filters. B- Vacuum filters
C- Pressure filters. D- Centrifugal filters.
These are the sterile preparation intended to administered other than intestinal route to bypass first pass metabolism and directly goes to systemic circulation.
These preparation give quick onset of action and site specific activity.
Suitable for drugs which are inactive in GIT environment.
Can be given unconscious or vomiting or diarrheal patient.
These are the sterile preparation intended to administered other than intestinal route to bypass first pass metabolism and directly goes to systemic circulation.
These preparation give quick onset of action and site specific activity.
Suitable for drugs which are inactive in GIT environment.
Can be given unconscious or vomiting or diarrheal patient.
Mixer Machines Mixer Machines are used in a number of different applications and industries in order to produce a final product that is the result of mixing or combining two or more materials.
it describes the controlled drug release by diffusion or dissolution or both or swelling or erosion and which kinetics it follows either zero,first , higuchi or peppas
Packaging is an integral part of pharmaceutical product.The most common polyethylene types used in packaging are high density polyethylene (HDPE), low density polyethylene (LDPE), and linear low density polyethylene (LLDPE). They are different in density, chain branching, crystallinity and consequently, in mechanical, optical and barrier properties.
formulation development of Transdermal drug delivery systems i.e. transdermal patches, compostion of transdermal patch, physical methods used to prepare tansdermal patch
The liquid oral manufacturing plant is designed to be operated by one operator and one helper, saving on precious man-power costs. Sugar syrup and manufacturing vessels are provided with limpet coils for heating and cooling, designed for internal vacuum to facilitate transfer of sugar directly from stores to sugar syrup vessel.
BYK-1640 is an affordable, polymer-based and VOC-free defoamer for many different aqueous systems. It is an excellent alternative to mineral oil-based defoamers.
Momentive has launched two new products, ECC3011 and ECC3051S conformal coatings that can withstand harsh operating conditions, helping to prevent the occurrence of corrosion on vital PCB components and surfaces.
These are the sterile preparation intended to administered other than intestinal route to bypass first pass metabolism and directly goes to systemic circulation.
These preparation give quick onset of action and site specific activity.
Suitable for drugs which are inactive in GIT environment.
Can be given unconscious or vomiting or diarrheal patient.
These are the sterile preparation intended to administered other than intestinal route to bypass first pass metabolism and directly goes to systemic circulation.
These preparation give quick onset of action and site specific activity.
Suitable for drugs which are inactive in GIT environment.
Can be given unconscious or vomiting or diarrheal patient.
Mixer Machines Mixer Machines are used in a number of different applications and industries in order to produce a final product that is the result of mixing or combining two or more materials.
it describes the controlled drug release by diffusion or dissolution or both or swelling or erosion and which kinetics it follows either zero,first , higuchi or peppas
Packaging is an integral part of pharmaceutical product.The most common polyethylene types used in packaging are high density polyethylene (HDPE), low density polyethylene (LDPE), and linear low density polyethylene (LLDPE). They are different in density, chain branching, crystallinity and consequently, in mechanical, optical and barrier properties.
formulation development of Transdermal drug delivery systems i.e. transdermal patches, compostion of transdermal patch, physical methods used to prepare tansdermal patch
The liquid oral manufacturing plant is designed to be operated by one operator and one helper, saving on precious man-power costs. Sugar syrup and manufacturing vessels are provided with limpet coils for heating and cooling, designed for internal vacuum to facilitate transfer of sugar directly from stores to sugar syrup vessel.
BYK-1640 is an affordable, polymer-based and VOC-free defoamer for many different aqueous systems. It is an excellent alternative to mineral oil-based defoamers.
Momentive has launched two new products, ECC3011 and ECC3051S conformal coatings that can withstand harsh operating conditions, helping to prevent the occurrence of corrosion on vital PCB components and surfaces.
Multifunctional Surfactants - Essential ingredients for efficient cleaning pr...Sorel Muresan
Water based cleaning products are continuously evolving driven by several factors such as challenging regulatory requirements, increased performance and safety demands from consumers, and price.
At AkzoNobel Surface Chemistry we are addressing our customer’s formulation needs by providing cutting-edge solutions for a wide range of applications. The exceptional functionalities of our surfactants bring additional value to formulations such as high performance at low concentration, foam control, tolerance to alkali and electrolytes, thickening, with a minimal impact on the environment and low human and aquatic toxicity.
Akzo Nobel Surface Chemistry has a wide range of surfactants for Household and Industrial & Institutional cleaning applications. Our technologies include, for example, narrow range fatty alcohol ethoxylates for efficient and sustainable cleaning, cationic cosurfactants delivering outstanding degreasing performance, and cationic surfactant thickeners for effective thickening across the whole pH range.
Improve water resistance with rheology additivesspecialchem-ada
Thanks to this presentation, you will learn how dispersants can help formulators to improve water resistance and other coatings' properties. By using an efficient and hydrophobic dispersing agent, formulators can improve the surface of the film and increase water repellency.
In this presentation, you will find some case studies (interior wall paints, exterior wall paints, ...).
This Brochure will give you a snapshot look at what we manufacture.
For more information please contact: sales@oiltechnics.com
or visit: www.oiltechnics.com
New Silicone Copolymer Lubricants - the alternative to PFPE lubricationmolykotetl
Molykote’s groundbreaking Silicone Copolymer research provides a fit-for-purpose alternative to PFPE lubrication in low end applications. In a presentation at the 20th International Colloquium Tribolgy in January 2016, Molykote unveiled innovative new research into Silicone Copolymers set to revolutionise the lubrication industry. Using a unique combination of Phenyl and Fluoro Silicone groups Molykote has created a new class of lubricants with both high thermal stability and elevated wear resistance
Narrow Range Ethoxylates - Highly targeted performance for more effective cle...Sorel Muresan
A narrow range ethoxylated alcohol, also called “a peaked ethoxylate”, has a distribution curve that is narrower than the equivalent standard alcohol ethoxylate with a considerably lower content of unreacted alcohol and lower foam than standard ethoxylates. Narrow range ethoxylates have targeted properties to improve degreasing performance at lower use concentration, while eliminating the need for hazardous solvents. At the same time they are compatible with most commonly used surfactants and builders. They also have very low odor, even if based on a short chain alcohol. This opens up many applications where short chain alcohol ethoxylates have previously been excluded and enables the formulator to prepare highly effective low VOC cleaners. The lower free alcohol content and higher proportion of the target ethoxylate make formulating easier and more cost effective than with standard alcohol ethoxylates. This offers the possibility to optimize raw material purchase, reduce inventories, and simplify production.
This Brochure gives good examples of products manufactured by OTL which have a range of applications both within Workshops and also at Load/Unload and storage areas. For more information please contact: sales@oiltechnics.com
or please visit: www.oiltechnics.com
The must have product guide to keeping Workshops, Forecourts, Bulk fuel Load/Offload areas, Yards and approach roads oil and grease free. Includes our Bio Tube for Interceptor/Separator Oil Digestion.
Workshop Solutions: Oil Technics Ltd saving you procurement costs without compromising on quality. Please have a look at our new website: www.oiltechnics.com
Oil Technics: Workshop and Process Areas:Brochure.David Holmes
Oil Technics solutions for keeping areas clean and pollution, slip free without having an adverse impact on the local environment.
Check out the Interceptor Bio Pillow, which helps keep Consent to Discharge levels in line with Water Authority directions.
Phenomics assisted breeding in crop improvementIshaGoswami9
As the population is increasing and will reach about 9 billion upto 2050. Also due to climate change, it is difficult to meet the food requirement of such a large population. Facing the challenges presented by resource shortages, climate
change, and increasing global population, crop yield and quality need to be improved in a sustainable way over the coming decades. Genetic improvement by breeding is the best way to increase crop productivity. With the rapid progression of functional
genomics, an increasing number of crop genomes have been sequenced and dozens of genes influencing key agronomic traits have been identified. However, current genome sequence information has not been adequately exploited for understanding
the complex characteristics of multiple gene, owing to a lack of crop phenotypic data. Efficient, automatic, and accurate technologies and platforms that can capture phenotypic data that can
be linked to genomics information for crop improvement at all growth stages have become as important as genotyping. Thus,
high-throughput phenotyping has become the major bottleneck restricting crop breeding. Plant phenomics has been defined as the high-throughput, accurate acquisition and analysis of multi-dimensional phenotypes
during crop growing stages at the organism level, including the cell, tissue, organ, individual plant, plot, and field levels. With the rapid development of novel sensors, imaging technology,
and analysis methods, numerous infrastructure platforms have been developed for phenotyping.
Nutraceutical market, scope and growth: Herbal drug technologyLokesh Patil
As consumer awareness of health and wellness rises, the nutraceutical market—which includes goods like functional meals, drinks, and dietary supplements that provide health advantages beyond basic nutrition—is growing significantly. As healthcare expenses rise, the population ages, and people want natural and preventative health solutions more and more, this industry is increasing quickly. Further driving market expansion are product formulation innovations and the use of cutting-edge technology for customized nutrition. With its worldwide reach, the nutraceutical industry is expected to keep growing and provide significant chances for research and investment in a number of categories, including vitamins, minerals, probiotics, and herbal supplements.
Observation of Io’s Resurfacing via Plume Deposition Using Ground-based Adapt...Sérgio Sacani
Since volcanic activity was first discovered on Io from Voyager images in 1979, changes
on Io’s surface have been monitored from both spacecraft and ground-based telescopes.
Here, we present the highest spatial resolution images of Io ever obtained from a groundbased telescope. These images, acquired by the SHARK-VIS instrument on the Large
Binocular Telescope, show evidence of a major resurfacing event on Io’s trailing hemisphere. When compared to the most recent spacecraft images, the SHARK-VIS images
show that a plume deposit from a powerful eruption at Pillan Patera has covered part
of the long-lived Pele plume deposit. Although this type of resurfacing event may be common on Io, few have been detected due to the rarity of spacecraft visits and the previously low spatial resolution available from Earth-based telescopes. The SHARK-VIS instrument ushers in a new era of high resolution imaging of Io’s surface using adaptive
optics at visible wavelengths.
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...University of Maribor
Slides from talk:
Aleš Zamuda: Remote Sensing and Computational, Evolutionary, Supercomputing, and Intelligent Systems.
11th International Conference on Electrical, Electronics and Computer Engineering (IcETRAN), Niš, 3-6 June 2024
Inter-Society Networking Panel GRSS/MTT-S/CIS Panel Session: Promoting Connection and Cooperation
https://www.etran.rs/2024/en/home-english/
ESR spectroscopy in liquid food and beverages.pptxPRIYANKA PATEL
With increasing population, people need to rely on packaged food stuffs. Packaging of food materials requires the preservation of food. There are various methods for the treatment of food to preserve them and irradiation treatment of food is one of them. It is the most common and the most harmless method for the food preservation as it does not alter the necessary micronutrients of food materials. Although irradiated food doesn’t cause any harm to the human health but still the quality assessment of food is required to provide consumers with necessary information about the food. ESR spectroscopy is the most sophisticated way to investigate the quality of the food and the free radicals induced during the processing of the food. ESR spin trapping technique is useful for the detection of highly unstable radicals in the food. The antioxidant capability of liquid food and beverages in mainly performed by spin trapping technique.
DERIVATION OF MODIFIED BERNOULLI EQUATION WITH VISCOUS EFFECTS AND TERMINAL V...Wasswaderrick3
In this book, we use conservation of energy techniques on a fluid element to derive the Modified Bernoulli equation of flow with viscous or friction effects. We derive the general equation of flow/ velocity and then from this we derive the Pouiselle flow equation, the transition flow equation and the turbulent flow equation. In the situations where there are no viscous effects , the equation reduces to the Bernoulli equation. From experimental results, we are able to include other terms in the Bernoulli equation. We also look at cases where pressure gradients exist. We use the Modified Bernoulli equation to derive equations of flow rate for pipes of different cross sectional areas connected together. We also extend our techniques of energy conservation to a sphere falling in a viscous medium under the effect of gravity. We demonstrate Stokes equation of terminal velocity and turbulent flow equation. We look at a way of calculating the time taken for a body to fall in a viscous medium. We also look at the general equation of terminal velocity.
Deep Behavioral Phenotyping in Systems Neuroscience for Functional Atlasing a...Ana Luísa Pinho
Functional Magnetic Resonance Imaging (fMRI) provides means to characterize brain activations in response to behavior. However, cognitive neuroscience has been limited to group-level effects referring to the performance of specific tasks. To obtain the functional profile of elementary cognitive mechanisms, the combination of brain responses to many tasks is required. Yet, to date, both structural atlases and parcellation-based activations do not fully account for cognitive function and still present several limitations. Further, they do not adapt overall to individual characteristics. In this talk, I will give an account of deep-behavioral phenotyping strategies, namely data-driven methods in large task-fMRI datasets, to optimize functional brain-data collection and improve inference of effects-of-interest related to mental processes. Key to this approach is the employment of fast multi-functional paradigms rich on features that can be well parametrized and, consequently, facilitate the creation of psycho-physiological constructs to be modelled with imaging data. Particular emphasis will be given to music stimuli when studying high-order cognitive mechanisms, due to their ecological nature and quality to enable complex behavior compounded by discrete entities. I will also discuss how deep-behavioral phenotyping and individualized models applied to neuroimaging data can better account for the subject-specific organization of domain-general cognitive systems in the human brain. Finally, the accumulation of functional brain signatures brings the possibility to clarify relationships among tasks and create a univocal link between brain systems and mental functions through: (1) the development of ontologies proposing an organization of cognitive processes; and (2) brain-network taxonomies describing functional specialization. To this end, tools to improve commensurability in cognitive science are necessary, such as public repositories, ontology-based platforms and automated meta-analysis tools. I will thus discuss some brain-atlasing resources currently under development, and their applicability in cognitive as well as clinical neuroscience.
ISI 2024: Application Form (Extended), Exam Date (Out), EligibilitySciAstra
The Indian Statistical Institute (ISI) has extended its application deadline for 2024 admissions to April 2. Known for its excellence in statistics and related fields, ISI offers a range of programs from Bachelor's to Junior Research Fellowships. The admission test is scheduled for May 12, 2024. Eligibility varies by program, generally requiring a background in Mathematics and English for undergraduate courses and specific degrees for postgraduate and research positions. Application fees are ₹1500 for male general category applicants and ₹1000 for females. Applications are open to Indian and OCI candidates.
Richard's aventures in two entangled wonderlandsRichard Gill
Since the loophole-free Bell experiments of 2020 and the Nobel prizes in physics of 2022, critics of Bell's work have retreated to the fortress of super-determinism. Now, super-determinism is a derogatory word - it just means "determinism". Palmer, Hance and Hossenfelder argue that quantum mechanics and determinism are not incompatible, using a sophisticated mathematical construction based on a subtle thinning of allowed states and measurements in quantum mechanics, such that what is left appears to make Bell's argument fail, without altering the empirical predictions of quantum mechanics. I think however that it is a smoke screen, and the slogan "lost in math" comes to my mind. I will discuss some other recent disproofs of Bell's theorem using the language of causality based on causal graphs. Causal thinking is also central to law and justice. I will mention surprising connections to my work on serial killer nurse cases, in particular the Dutch case of Lucia de Berk and the current UK case of Lucy Letby.
Seminar of U.V. Spectroscopy by SAMIR PANDASAMIR PANDA
Spectroscopy is a branch of science dealing the study of interaction of electromagnetic radiation with matter.
Ultraviolet-visible spectroscopy refers to absorption spectroscopy or reflect spectroscopy in the UV-VIS spectral region.
Ultraviolet-visible spectroscopy is an analytical method that can measure the amount of light received by the analyte.
Travis Hills' Endeavors in Minnesota: Fostering Environmental and Economic Pr...Travis Hills MN
Travis Hills of Minnesota developed a method to convert waste into high-value dry fertilizer, significantly enriching soil quality. By providing farmers with a valuable resource derived from waste, Travis Hills helps enhance farm profitability while promoting environmental stewardship. Travis Hills' sustainable practices lead to cost savings and increased revenue for farmers by improving resource efficiency and reducing waste.
Professional air quality monitoring systems provide immediate, on-site data for analysis, compliance, and decision-making.
Monitor common gases, weather parameters, particulates.
9. Our company has carefully selected a network of
trusted ingredients partners from 10+ countries
Maximum flexibility: Solutions tailored to your
specific requirements
Extensively tested quality: Ensuring you get
exactly what you expect
Competitive pricing: Giving you the opportunity
to increase your margins
IMPROVE &
9
12. 11
FOAM FORMATION
A COMMON ISSUE IN LIQUID SYSTEM
Basically, FOAM does not form in apure liquid as
bubbles simply break at the surface.
In Reality, Air / Emulsion/Surfactant are
incorporate into liquid during production &
application process, and its cause of FOAM
FORMATION & STABILIATION
Macrofoam
Located at the coating surface
Foam bubble stabilized by surfactant
Double layer (foam lamella)
Microfoam
Located below coating layer
Foam bubble stabilized by surfactant (“anchor mechanism”)
Stabilised by high coating viscosity
(velocity of rising determined by Law of Stoke)
Macrofoam
Microfoam
13. 12
FOAM CONTROL
TECHNOLOGY OF CHOICES
F
ATTYACIDSAMIDE ORESTER
POL-ALKYLGLYCOL
ORGANO-PHOSPHATE
ORGANIC POL
YMER (ACR
YLATE/ETHER)
ALIPHATIC HYDROCARBON
MENERAL OILS
SILICONE OILS
POLYSILOXANE-PILYETHER COPOLYMER
Hydrophobic particles modification usually help to increase an deformer efficiency (metallic soap,silica,organic urea derivatives)
DEFECT
FOAM
16. 16
EVALUATE JEBCHEM 1805AQ IN DECORATIVE WATER BASED PAINT
JEBCHEM
JC 1805AQ show BETTER defoam efficiency
B 1615
JEBCHEM 1805AQ
High shear
(Grinding)
Evaluated rating* of defoaming efficiency on film appearance
BYK 1615 JEBCHEM 1805 AQ
- Low shear
Wet film 1 2.5
Dry film 2 3.5
- High shear
Wet film 2 4
Dry film 3 4
Characteristic
Anti-foam performance rating
(1 = Poor, 5 = Excellent)
Low shear
(Let-down)
- Jebchem 1805AQ provide better efficiency at
high shear mixing.
- Jebchem 1805AQ shows anti-foam
performance better than BYK1615 in both
process
17. 15
S
PONGE ROLLER TES
T METHODE
Competitor
0.5%B022
Competitor
0.5%B018
Standard
NO ANTIFOAM
0.5%
JC1805AQ
0.5%
JC1710AQ
Standard
NO ANTIFOAM
JebChem 1710 AQ
WATERBASEDECORATIVE P
AINT – 100%MODIFIED SILICONE
S
TIRING TES
T METHODE
Competitor
0.5%B022
Competitor
0.5%B018
0.5%
1710AQ
Standard
NO ANTIFOAM
18. 16
WATERBASEDECORATIVE P
AINT – MINERAL OIL MODIFICATION
JebChem 1009M AQ
Competitor
0.5%
Competitor
0.5%B037
0.5%
1009MAQ
Standard
NO ANTIFOAM
Competitor
0.5%A125
S
PONGE ROLLER TES
T METHODE
19. 19
JEBCHEM
The superior Defoamer for premium Auto Car Refinish
& Solvent Base Industrial Coatings
JebChem 1066 Silicone defoamer for solvent-free and solvent-borne
coatings, printing inks, and ambient curing plastic systems on the
basis of epoxy resin and polyurethane. Standard silicone defoamer for
all solvent-borne systems. Good balance between effectiveness and
compatibility
B E N E F I T :
• Highly effective defoamer for solvent-borne and
solvent-free coating systems and printing inks,
• Offers optimal defoaming at a very low percentage of
incompatible substances.
• RAPID FOAM KNOCKDOWN
• EASY OPERATION
• LONG TERM STORAGE STABILITY
• NO ADVERSELY AFFECTING FILM APPEARANCE
• EFFECTIVE IN VARIETY OF APPLICATION
CHALLENGES SOLVED
JebChem 1066 Competitive with Competitor 066 in price & quality : Quick Test & Fast Result
20. 20
JEBCHEM
Silicone-free defoamer on polymer-basis for solvent-borne and solvent-free
systems. Standard defoamer for many different applications.
JebChem 2052 Competitive with Competitor 052 in price & quality : Quick Test & Fast Result
21. 14
JebChem 2052
SOLVENT BASE– SILICONEFREEDEFOAMER
S
TIRING TES
T METHODE HIGH S
PEED S
HAKING TES
T METHODE
JC2052
Competitor
B052
JC 2052
Competitor
B052
23. 18
A COMMON ISSUE IN LIQUID SYSTEM
SURFACE DEFECTS
SLIP ADDITIVE
Slip additive oriented itself on the surface of paint film. The
repeating unit of methyl siloxane group & organo-
modification will be determine slip property of the silicone.
LEVELLING ADDITIVE
Orientation towards the surface by controlled incompatibility
The variation of Mw and Polarity will determine the levelling
property in each paint system.
FLOW ADDITIVE
Enhancing the wet-out & flow ability of uncured film to eliminate
surface defects such as craters, fisheye, orange peels, brush
mark during applications, derived by surface tension, viscosity
of paint atsystem
S
UBSTRATEWETTING ADDITIVE
All aqueous coatings cause problems on substrates whose
surface tension values are below the values of the coating.
Examples craters, pinholes, adhesion..
24. 24
CHEMICAL OF SLIP ADDITIVES
Silicone Slip additive
Polydimethylsiloxanes
28. 22
SLIP ADDITIVE EVALUATION
1KTP
A SOLVENT BASESYSTEM
The Slip efficiency determine by Co-
efficient of Friction (COF) As result fond
that solvent basedJ
ebChem slip additive
provide better performance than
competitor.
LOWER COFvalue,BEETER slip property
TEST
% Dosage
(supply
form)
Slip Agent
In 35% PChem BM66 Solution
Average
COF
Reading
1 0.0 Standard - No Slip Agent 1.27
2 1.0 JebChem 3306(15% Solids) 0.43
3 0.5 JebChem 3323(100% Solids) 0.24
4 0.5 JebChem 3333(100% Solids) 0.72
5 0.5 JebChem 3410 (100% Solids) 0.57
6 0.5 Comp.T410 (100%) 0.63
7 0.5 CompT450 (100%) 0.89
29. 23
TEST
% Dosage
(supply form)
Slip Agent
In 35% Mowilith 727
Average COF
Reading
1 0.0 Standard - No SlipAgent 1.04
2 0.5 JebChem 3307(100% Solids) 0.50
3 0.5 JebChem 3410(100% Solids) 0.67
4 0.5 Jebchem 3333(100% Solids) 0.63
5 1.0 JebChem 3511 (40% Solids) 0.30
6 0.5 Comp.T410 (100%) 0.77
7 0.5 CompT450 (100%) 0.79
8 0.5 Comp B331 (100%) 0.70
9 0.5 Comp B333 (100%) 0.69
The Slip efficiency determine by Co-
efficient of Friction (COF) As result fond
that J
ebChem slip additive provide better
performance than competitor.
LOWER COFvalue,BETTER slip property
SLIP ADDITIVE EVALUATION
ACR
YLICWATERBASESYSTEM
30. 13
JEBCHEM 3333
Develop super slip w/b roof tile paint for Water Base Coating
Figure 1: The performance evaluation
of dirt pick up ability in different slip
additive. As test result, observed that
JebChem 3511 has very good
enhancing ability of dirt pick up, less
pigment stuck on sample panel
compare to B 378
Figure 2: The performance evaluation of
water repellent in different slip additive. As
test result observed JebChem 3333 can
enhance water repellency in water-base
roofing tile paint there are water stuck on
sample panel less than B 378.
JebChem 3511 is superior slip surface additive ,to improve slip and water repellant property
31. 31
JEBCHEM 6377
Flow and levelling – Solvent Base Coating
Performance evaluation JebChem Flow and Levelling in Base Coat 2K PU Car
refinish application
As evaluation of paint flow efficiency in different Flow & Levelling
compare JebChem product to competitor in market. Test result
observed paint film with added of JebChem 6377 provide a desired
flow efficiency no observed flow line. On the other hand there are
severe unfavorable flow on film with competitor product
Competitor E JebChem 6377
32. 32
JEBCHEM 6354, 6356, 6358
Flow and levelling – Solvent Base Coating
Performance evaluation JebChem Flow and Levelling in Base Coat 2K PU Car refinish
application
As evaluation of paint flow efficiency in different Flow & Levelling compare JebChem product to competitor in market. Test result observed paint film
with added of JebChem 6354, 6356 and 6358 provide a desired flow efficiency no observed flow line. On the other hand there are severe
unfavorable flow on film with competitor product
Competitor T
JebChem 6354
Wire-wound
Track Line
Good Flow
Competitor T JebChem 6356
Good Flow
Wire-wound
Track Line
Competitor T
JebChem 6358
36. 27
UNSTABILIZED OF PIGMENT DISPERSION
A COMMON ISSUE IN LIQUID P
AINT SYSTEM
PIGMENT FLOCCULATION
POOR OF COLOR STRENGHTS
POOR OFGLOS
SORTRANS
P
ARENCY
COLOR SEPARATIONS
BERNARD CELL ISSUE
HIGHVISCOSITY COLOR P
ASTE
LOW PIGMENT LOADING
LONG GRINDING/DISPERSINGTIME
S
TABILITY ISSUESOVERTIME
40. 31
JEBCHEM – DISPERSANTS
PRODUCT PORTFOLIO
CHEMISTRY PRODUCT CODE % ACTIVE Mw POLARITY W/B S/B UV
Polyacrylate JebChem 8190 AQ 50% High High ●
Fatty Acid JebChem 8504 AQ 40% Low High ●
Polyamide JebChem 8740 AQ 100% High High ●
Polyacrylate CPT JebChem 8755 AQ 100% High High ●
Polyamide JebChem 8907 100% High High ● ● ●
Polyacrylate JebChem 8061 100% High Low ● ●
Fatty Acid JebChem 8108 100% Low Low ●
Polyacrylate JebChem 8800 100% High Low ●
Fatty Acid JebChem 8104 50% Low Medium ●
Polyposphoric Acid Ester JebChem 8110 50% Low Medium ●
Polyamide JebChem 8163 50% High Medium ●
Polyamide CPT JebChem 8531 50% High Medium ● ●
41. 6
Wetting &Dispersing for Water Base Coating – General
Development organic Pigment Paste Binder Free for Water Based System.
JebChem 8755AQ is universal dispersant forW/B Organic Dispersant
JEBCHEM 8755 AQ
42. 42
JEBCHEM 8755 AQ
Wetting &Dispersing for Water Base Coating – General
The evaluation of JebChem Dispersing Agent
Compared to Competitor product in organic
pigment for water based system
43. Figure1. Establish full shade of FW200 CB paste
using JebChem 8531 compare to CAB standard
16
JEBCHEM 8531
Figure3. Establish reduce shade/rub out test of
FW200 CB paste using JebChem 8531 compare to
CAB standard
Evaluation JebChem DispersingAgent for Carbon Black Paste in 2K PU system :
Improving CB paste formulation to increase the productivity, reduce grinding time,higher color strength
Higher Gloss
Shorten Grinding
time from 6 hrs. to
2 hrs.
JebChem 8531provided avery superior dispersant for PremiumAuto OEC & Refinish
44. 32
JEBCHEM 8061
SHORT O IL ALKYD / Low - Medium Polarity System
Performance evaluation STD NC Black Chip Vs FW2 Pigment Paste using JC8061
As the result testing of disperse carbon black pigment FW2 with JebChem 8061 can achieved high gloss without
mixed with NC black chip. And other basic pigment paste properties viscosity and fineness have no different
significant. And in addition, the observation of dispersing ability are not difficult to operate.
Stability test over 7 day at 60 degree of Celsius haven’t seen changed or increase in viscosity and fineness compare
to the initial result showed good stability performance.
45. 34
JEBCHEM 8110
Dispersing for Solvent Base Coating – General
The evaluation of JebChem Dispersing Agent Compared to Competitor product in White Base Long Oil System
S
TD Competitor J
C 8110
B 110 JC 8110
As test result found JebChem 8110 provide good dispensability of
Titanium past show desirable whiteness , opacity ,gloss and viscosity
46. 16
JEBCHEM 8163
Evaluation dispersing agent JebChem 8163 and 8531 for FW200 carbon black (S/B)
Improving CB paste formulation to increase the productivity, reduce grinding time,higher color strength
JebChem 8531provided avery superior dispersant for PremiumAuto OEC & Refinish