Storm sewers make up a large percentage of drainage system in an urban setup. The design of these
components are based on rainfall intensities of a specific design period for that location. These can be derived from
intensity-duration-frequency (IDF) relationship. These IDF relationships are derived from historical rainfall, using
an extreme value distribution for maximum rainfall intensity. In the present study the IDF curves and parameter
regionalisation were studied for various kinds of basins. These equation parameters can be then used to understand
the spatial variation of rainfall intensity in the study area. The parameter contour maps subsequently generated using
various interpolation method are then used for plotting IDF curves for any ungauged station in the basin.
Stream Gauging: Necessity; Selection of gauging sites; Methods of discharge measurement; Area-Velocity method; Venturi flume; Chemical method; weir method; Measurement of velocity; Floats Surface float, Sub–surface float or Double float, Twin float, Velocity rod or Rod float; Pitot tube; Current meter; Working of current meter; rating of current meter; Measurement of area of flow; Measurement of width - Pivot point method; Measurement of depth Sounding rod, Echo- sounder.
Levels in planning, Functional requirements of water resources projects, steps in
water resources planning, Environmental aspects in water resources planning.
On March 11, 2016, ICLR held a Friday Forum workshop entitled 'Mapping extreme rainfall statistics for Canada', led by Dr. Slobodan Simonovic of Western University.
Climate change is expected to increase the frequency and intensity of extreme rainfall events, affecting rainfall intensity-duration-frequency (IDF) curve information used in the design, maintenance and operation of water infrastructure in Canada. Presented in this lecture are analyses of precipitation data from 567 Environment Canada hydro-meteorological stations using the IDF_CC tool. Results for the year 2100 based on Canadian climate model and an ensemble of 22 GCMs have been generated. A spatial interpolation method was used to produce Canadian precipitation maps for events of various return periods. Results based on the Canadian climate model indicate a reduction in extreme precipitation in central regions of Canada and increases in other regions. Relative to the ensemble approach, the Canadian climate model results (a) suggest more spatial variability in change of IDFs, and (b) the ensemble approach generated generally lower values than the Canadian climate model.
Dr. Simonovic has extensive research, teaching and consulting experience in water resources systems engineering. He teaches courses in water resources and civil engineering systems. He actively works for national and international professional organizations. Dr. Simonovic’s primary research interest focuses on the application of systems approach to management of complex water and environmental systems. Most of his work is related to the integration of risk, reliability, and uncertainty in hydrology and water resources management. He has received a number of awards for excellence in teaching, research and outreach. He has published over 450 professional publications and three major textbooks. He was inducted to the Canadian Academy of Engineering in June of 2013.
Stream Gauging: Necessity; Selection of gauging sites; Methods of discharge measurement; Area-Velocity method; Venturi flume; Chemical method; weir method; Measurement of velocity; Floats Surface float, Sub–surface float or Double float, Twin float, Velocity rod or Rod float; Pitot tube; Current meter; Working of current meter; rating of current meter; Measurement of area of flow; Measurement of width - Pivot point method; Measurement of depth Sounding rod, Echo- sounder.
Levels in planning, Functional requirements of water resources projects, steps in
water resources planning, Environmental aspects in water resources planning.
On March 11, 2016, ICLR held a Friday Forum workshop entitled 'Mapping extreme rainfall statistics for Canada', led by Dr. Slobodan Simonovic of Western University.
Climate change is expected to increase the frequency and intensity of extreme rainfall events, affecting rainfall intensity-duration-frequency (IDF) curve information used in the design, maintenance and operation of water infrastructure in Canada. Presented in this lecture are analyses of precipitation data from 567 Environment Canada hydro-meteorological stations using the IDF_CC tool. Results for the year 2100 based on Canadian climate model and an ensemble of 22 GCMs have been generated. A spatial interpolation method was used to produce Canadian precipitation maps for events of various return periods. Results based on the Canadian climate model indicate a reduction in extreme precipitation in central regions of Canada and increases in other regions. Relative to the ensemble approach, the Canadian climate model results (a) suggest more spatial variability in change of IDFs, and (b) the ensemble approach generated generally lower values than the Canadian climate model.
Dr. Simonovic has extensive research, teaching and consulting experience in water resources systems engineering. He teaches courses in water resources and civil engineering systems. He actively works for national and international professional organizations. Dr. Simonovic’s primary research interest focuses on the application of systems approach to management of complex water and environmental systems. Most of his work is related to the integration of risk, reliability, and uncertainty in hydrology and water resources management. He has received a number of awards for excellence in teaching, research and outreach. He has published over 450 professional publications and three major textbooks. He was inducted to the Canadian Academy of Engineering in June of 2013.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
ESTIMATION OF NRCS CURVE NUMBER FROM WATERSHED MORPHOMETRIC PARAMETERS: A CAS...IAEME Publication
The NRCS-CN equation for flood predictions relies on the value of the Curve Number and the amount of rainfall event to determine the corresponding runoff. Usually, the curve number value (CN value) is extracted from the tables that follow United State land features classification which might not be applicable to the land features in Saudi Arabia. This research paper doesn’t use NRCS-CN table values form of the US for estimating the curve number value, rather, the CN values have been estimated from the data of rainfall and runoff events of some gauged watersheds in the western region of Saudi Arabia (Yiba watershed and its sub-basins).
APPLICATION OF 1-D HEC-RAS MODEL IN DESIGN OF CHANNELSAM Publications
Flood occurs at Surat city frequently due to sudden release of water from Ukai dam in river Tapi. At the
time of floods in river Tapi, Surat city and surrounding regions are most affected. The city has faced many floods
since long back. Major flood event occurred in the year 1883, 1884, 1942,1944,1945,1949, 1959, 1968, 1994, 1998,
2002, 2006, 2007 and 2012. The carrying capacity of river is approximately about 4.5 lakhs cusecs (12753 cumecs) at
present. In this, stability of a segment of lower reach approximately 6 km length of Tapi river between Weir cum
causeway and Sardar bridge is evaluated for its carrying capacity and stability in response to discharge and slopes
using HEC-RAS software for past flood data. The study reach consists of 24 cross-sections. The hydraulics model,
HEC-RAS is employed to evaluate flood conveyance performance and also uniform flow computation is carried out.
In the present study existing storm drains are not only marked but based on the HEC-RAS water surface elevation
computation for various flood discharges, need of flood gates on the storm drains are also assessed. The
recommendations are done based on this study either to increase height of bank or construct a retaining wall at
certain sections along the study reach. The present study also recommends installations of flood gates on all the storm
drain outlets which are without flood gates. The width of river in no case be encroached as sections are sensitive high
floods.
Comparison of Explicit Finite Difference Model and Galerkin Finite Element Mo...AM Publications
This paper describes Galerkin finite element (FEFLOW) models for the simulation of groundwater flow in twodimensional,
transient, unconfined groundwater flow systems. This study involves validation of FEFLOW model with reported
analytical solutions and also comparison of reported Explicit Finite Difference Model for groundwater flow simulation
(FDFLOW). The model is further used to obtain the space and time distribution of groundwater head for the reported
synthetic test case. The effect of time step size, space discretizations, pumping rates is analyzed on model results.
Probable maximum precipitation (PMP) is widely used by hydrologists for appraisal of probable maximum flood (PMF) used for soil and water conservation structures, and design of dam spillways. The estimation of design storm for example depends on availability of rainfall quantities and their durations. Daily maximum multiannual series are one of the main inputs for design streamflow calculation. The study generated annual series of Daily maximum rainfall for fourty four stations by using statical approach such as Normal distribution, Log-Normal Distribution, Pearson type III distribution and Gumbel’s Distribution .Results reveals that among the different statical approaches Log-Normal distribution fits the best compared to others. Isohyetal Maps of study area at different frequency are produced by using GIS tools, the maximum intensity varies from 2.5 mm/hr to 628 mm/hr.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Cimahi river benchmarking flood analysis based on threshold of total rainfalleSAT Journals
Abstract
Flood in Cimahi city coming from the overflow of Cimahi river is a disaster that often occur in the middle Cimahi and extends
downstream region namely Bandung Regency which is still included in the Cimahi Watershed. Flood in Cimahi can earlier be
estimated when the design intensity of rainfall determined and calculate the flow of the river from upstream to downstream.The
purpose of this study was to determine total rainfall that caused the peak river discharge of Cimahi river in upper and middle
cross section and could easily received. The method used in this study is an early warning flood with benchmarking discharge
based on rainfall-runoff models in the Cimahi watershed derived from unit hydrograph synthetic Nakayasu of Cimahi river. The
results obtained from this study is the peak discharge of the Cimahi river upstream at Q= 1.41 m3 / s and in the middle of the
cross section of Q = 2.12 m3 / s. Based on the measurements obtained bankfull discharge Cimahi river upstream cross section of
191.8 m3 / s and bankfull discharge in the middle cross section is 556.26m3 / s. With the drainage coefficient of Cimahi city based
on land use obtained 0,57, then obtained a threshold total rainfall causes of flooding in the upper and middle is respectively as
high as 239 mm and 460 mm. Threshold of Rainfall, bankfull discharge and Cimahi river cross section in this research
integrated on the map namely Benchmarking Flood Diagram of Cimahi City that can be published to stakeholders and the public.
Keywords: bankfull discharge, benchmarking flood diagram, hydrograph, peak discharge,threshold of rainfall
A study confined to the lower tapi basin in Gujarat, India to find out the primary causes for 2006 floods in Surat city. The study involves collection of topographical data from the local geological survey organization, rainfall data from meteorological department of india and the application of HEC-HMS software from US Army corps of engineers to identify the primary cause of the runoff.
Time Series Data Analysis for Forecasting – A Literature ReviewIJMER
In today's world there is ample opportunity to clout the numerous sources of time series data
available for decision making. This time ordered data can be used to improve decision making if the data
is converted to information and then into knowledge which is called knowledge discovery. Data Mining
(DM) methods are being increasingly used in prediction with time series data, in addition to traditional
statistical approaches. This paper presents a literature review of the use of DM and statistical approaches
with time series data, focusing on weather prediction. This is an area that has been attracting a great deal
of attention from researchers in the field.
Hydrologic data generally consist of a sequence of observations of some phase of the hydrologic cycle made at a particular site. The data may be a record of the discharge of a stream at a particular place, or it may be a record of the amount of rainfall caught in a particular rain gage.
Although for most hydrologic purposes a long record is preferred to a short one, the user should recognize that the longer the record the greater the chance that there has been a change in the physical conditions of the basin or in the methods of data collection. If these are appreciable, the composite record would represent only a nonexistent condition and not one that existed either before or after the change. Such a record is inconsistent.
Modelling of Short Duration Isopluvial Map For Raichur District Karnataka Moh...Mohammed Badiuddin Parvez
Everyoneacknowledges that it rains, runoff is generated for a design point of view we should know how much and how often it rains on our project location.Estimation of rainfall intensity is commonly required for the design of hydraulic and water resources engineering control structures. The present study aimed the Estimation of rainfall intensityin Raichur District using twenty five Rain gauge Station with 19 years of rainfall data (1998 to 2016). Log Normal Distribution, techniques are used to derived the rainfall intensity values of 2,5,10,15,30,60,120,720,1440 minutes of rainfall duration with different return period. The short duration IDF using daily rainfall data are presented, which is input for water resources projects. Isopluvial maps were developed for 25years, 50years, 75years and 100years return period
Similar to Intensity-Duration-Frequency Curves and Regionalisation (20)
DEVELOPMENT OF TODDLER FAMILY CADRE TRAINING BASED ON ANDROID APPLICATIONS IN...AM Publications
Toddler family cadre is a community members work voluntarily in fostering and providing information to parents of toddlers about how to properly care for children. Toddler Family cadre desperately need training to increase their skills. There are still a few Toddler family cadres who get training so that the knowledge and skills of parents and other family members in developing toddlers' growth through physical stimulation, motoric intelligence, emotional and social economy as well as possible are still lacking. The purpose of this study is to develop an Android- assisted Toddler family cadre training model in Demak. This research is research in tian research and development. The research location was in Demak Regency. Toddler family cadres became the object of this research. Development of Toddler family cadre training models assisted by Android in Demak is feasible to be used as an effort to improve Toddler Family cadres' capabilities.
TESTING OF COMPOSITE ON DROP-WEIGHT IMPACT TESTING AND DAMAGE IDENTIFICATION ...AM Publications
In recent years the use of composite materials in structural components has become increasingly common in a wide range of engineering applications. Composite materials offer numerous advantages over more conventional materials because of their superior specific properties, but a serious obstacle to a more widespread use of these materials is their high sensitivity to localized impact loading. This paper presents an experimental study to assess the impact response of drop weight impact tests on fiber reinforced polymer composites with deferent load and damage identification of composite using Non-destructive testing techniques ultrasonic testing (UT) C scan. In the study includes checking the strength of the specimen, plotting of graphs between the height and the impact energy obtained and tabulating the results after conducting the various functional tests.
THE USE OF FRACTAL GEOMETRY IN TILING MOTIF DESIGNAM Publications
In this paper I will present the use of fractal geometry to design tile motifs. A fractal is a geometric figure that combines the several characteristics among others: its parts have the same form as the whole, fragmented, and formation by iteration. The concept of fractals has been spread over all fields of sciences, technology, and art. This paper aims to provide an algorithm to creating motifs of tile algorithm for create the tile motif consists of base, iteration, coloration and duplication. In order to help the reader better understand the algorithm, I will present some script using Matlab. We describe a mathematically based algorithm that can fill a spatial region with sequence of randomly placed which may be transformed copies of one motif or several motifs. By using this algorithm, I can produce thousand variety of aesthetically pleasing tile motifs, of which we show a number of examples.
TWO-DIMENSIONAL INVERSION FINITE ELEMENT MODELING OF MAGNETOTELLURIC DATA: CA...AM Publications
Two-dimensional resistivity analysis of magnetotelluric data has been done at “Z” geothermal area which is located in southern part of Indonesia. The objective is to understand subsurface structure beneath reasearch area based on 2-D modeling of magnetotelluric data. The inversion finite element method were used for numerical simulations which requires discretization on the boundary of the modeling domain. The modeling results of magnetotelluric data shows relativity structure dissemination: 0-10 ohm.m in a thickness of 1 km (Clay Cap), 10-100 ohm.m with 1-2 km depth respectively (reservoir zone), and on a scale of 100-1000 ohm.m in a depth of 2-3 km (heat source zone). The result of relativity structure can be used to delineate an area with geothermal prospect around 12 km2.
USING THE GENETIC ALGORITHM TO OPTIMIZE LASER WELDING PARAMETERS FOR MARTENSI...AM Publications
To achieve the pre-set welding size, this paper presents the optimization of the constrained overlap laser welding input parameters for AISI 416 and AISI 440FSe stainless, thickness 0.5 mm. In this study, the proposed optimization algorithm is the Genetic Algorithm (GA). After training 10 times for 30 NP (population size), each training repeated 200 times, the results achieved as expected. The error is compared with the result of the affirmation experiment not exceeding 5%.
ANALYSIS AND DESIGN E-MARKETPLACE FOR MICRO, SMALL AND MEDIUM ENTERPRISESAM Publications
The Ministry of Cooperatives and Small and Medium Enterprises launched in 2018 the number of Micro, Small and Medium Enterprises (MSMEs) in Indonesia as many as 58.97 million people. It is predicted that the number of MSMEs players in 2019 will amount to 59.2 million. This shows that the Indonesian people have made changes in the field of family economics which initially as consumptive are now productive. The community prefers to carry out activities that can increase family income. Future MSMEs remain the mainstay of the national economy. In accordance with the government roadmap, in 2020 e-commerce transactions are predicted to reach Rp1,300 trillion or equivalent to USD130 billion. According to data from the Central Statistics Agency (BPS), the contribution of MSMEs to Indonesia's Gross Domestic Product (GDP) reached 61.41%, with the number of MSMEs reaching almost 60 million units. However, only around 8% or 3.79 million of the 59.2 million MSMEs players have used online platforms to market their products. Based on the above problems, researchers conducted research on the analysis and display of E-Marketplace for MSMEs in Indonesia. The type of research used is action research. The object of research is MSMEs which are under the Office of Industry and Trade of Sragen Regency. The method of data collection is by techniques: (1) interview, (2) documentation (3) observation, (4) literature study. The researcher uses the waterfall method in developing the system. The research team has successfully analyzed the E-Market place according to the results of data collection. The research team has succeeded in designing the E-Marketplace for MSMEs. E-Marketplace designed can be used by admin, MSME and user. Admin is in charge of managing E-Marketplace and has full access rights. MSMEs can register online and manage their products in E-Marketplace. Users or buyers can search data in E-Marketplace as desired. To make transactions, users can interact directly with MSMEs according to the data provided in E-Marketplace. E-Marketplace can be used for marketing together MSMEs products. This e-marketplace can be accessed at www.umkmonline.com
REMOTE SENSING AND GEOGRAPHIC INFORMATION SYSTEMS AM Publications
Remote sensing technology's increasing accessibility helps us observe research and learn about our globe in ways we could only imagine a generation ago. Guides to profound knowledge of historical, conceptual and practical uses of remote sensing which is increasing GIS technology. This paper will go briefly through remote sensing benefits, history, technology and the GIS and remote sensing integration and their applications. Remote sensing (RS) is used in mapping the predicted and actual species and dominates the ecosystem canopy.
EVALUATE THE STRAIN ENERGY ERROR FOR THE LASER WELD BY THE H-REFINEMENT OF TH...AM Publications
Currently, the finite element method (FEM) is still one of the useful tools in numerical simulation for technical problems. With this method, a continuum model presented by a certain number of elements with a simple approximation field causes the presence of discretization error in solutions. This paper considers the butt weld by laser which subjected the tension for AISI 1018 steel highness 8 mm. The aim of the study is to use the h-refinement of the FEM in estimation the strain energy error for the laser weld mentioned. The results show that the stability of the h-refinement shown by the value of the relative error of the strain energy is quite small, specifically; FEM is less than 5.7% and extra is no more than 3.7%.
HMM APPLICATION IN ISOLATED WORD SPEECH RECOGNITIONAM Publications
Speech recognition is always being an all-time trendy topic for discussion and also for researches and we see a major application in our life. This paper provides the work done on the application of Hidden Markov model to implement isolated word speech recognition on MATLAB and to develop and train the system for set of self-selective words for specific user (user dependent) to get maximum efficiency in word recognition system. Which uses the forward and Baum-welch algorithm and fitting Gaussian of the Baum-welch algorithm for all the iteration perform. We use a sample of 7 alphabets which are recorded in 15 different ways giving total of 105 word to use for training with each word with 15 variations. This system can be used in real world in system security using voice security system and mainly for children and impaired people.
PEDESTRIAN DETECTION IN LOW RESOLUTION VIDEOS USING A MULTI-FRAME HOG-BASED D...AM Publications
Detecting pedestrians in low resolution videos is a challenging task, due to the small size of pedestrians in the images and the limited information. In practical outdoor surveillance scenarios the pedestrian size is usually small. Existing state-of-the-art pedestrian detection methods that use histogram of oriented gradient (HOG) features have poor performance in this problem domain. To compensate for the lack of information in a single frame, we propose a novel detection method that recognizes pedestrians in a short sequence of frames. Namely, we take the single-frame HOG-based detector and extend it to multiple frames. Our detector is applied to regions containing potential moving objects. In the case of video taken from a moving camera on an aerial platform, video stabilization is first performed to register the frames. A classifier is then applied to features extracted from spatio-temporal volumes surrounding the potential moving objects. On challenging stationary and aerial video datasets, our detection accuracy outperforms several state-of-the-art algorithms.
The aim of this paper is to help the blind people to identify and catch the public transport vehicles with the help of Light Fidelity technology. It is a Navigation aid. When the bus arrives at the bus stand, transmitter in the bus transmits the light signals and receiver in the stick, receives the light signals and a sound signal is generated through the speaker present in the stick. The sound message contains the bus number and the destination of the bus. In addition to this, if the person is absconded or lost, details of the location will be sent to his/her family members by pressing a button. This is made possible with the help of Global System for Mobile (GSM). Finally, presence of water can be detected along the blind person’s path, with the help of water sensors.
EFFECT OF SILICON - RUBBER (SR) SHEETS AS AN ALTERNATIVE FILTER ON HIGH AND L...AM Publications
A digital radiography delivers a radiation dose to patients; therefore it poses potential risk to the patients. One effort to reduce dose is carried out using a radiation filter, e.g. Silicone Rubber (SR) sheet. The purpose of this research was to determine the impact of the SR sheet on the high contrast objects (HCO) and the low contrast objects (LCO). The dose reduction was determined from attenuation x-rays before and after using the SR sheet. Assessment of HCO and LCO was observed from CDR TOR phantom at tube voltage of 48 kVp and tube current of 8 mAs. The physical parameter to assess image quality was the Signal to Noise Ratio (SNR) value in LCO. The maximum x-ray attenuation using the SR sheet is 48.82%. The visibility of the HCO remains the same, namely 16 objects; however the LCO slighly decreases from 14 objects to 13 objects after using the SR sheet. The SNR value decreases with an average value of 15.17%.Therefore, the SR sheet as a alternative filter has no effect on the HCO and has realtively little effect on the LCO. Thus, the SR sheet potentially is used for radiation protection in patients, especially on examinations that do not require low contrast resolution.
UTILIZATION OF IMMUNIZATION SERVICES AMONG CHILDREN UNDER FIVE YEARS OF AGE I...AM Publications
Immunization is the key strategy to curb communicable diseases which are the number one killer of children under five. Immunization prevents mortalities of approximating three million children under five annually. This study aimed to assess utilization of immunization services among children under five of age in Kirinyaga County, Kenya.
REPRESENTATION OF THE BLOCK DATA ENCRYPTION ALGORITHM IN AN ANALYTICAL FORM F...AM Publications
The article presents the study of cryptographic transformations of the Kuznyechik algorithm in relation to differential analysis and the translation of their representations into a more convenient form for cryptanalysis. A simplification of the type of transformations of the algorithm to algebraic the form, in which cryptanalysis software will be more effective. Since the description of the algorithm in the analytical form allows for 16 cycles of execution of the shift register with linear feedback, each of which will be carried out 16 operations of multiplication and 15 operations of addition, reduced to 16 multiplying and 15 the operations of addition. The result is an algebraic form of a linear transformation (from a shift register with linear feedback to the multiplication of the matrix in a finite field). In the future, the algebraic type of transformation can be used to effectively carry out differential cryptanalysis.
Optical character recognition (OCR) is process of classification of optical patterns contained in a digital image. The process of OCR Recognition involves several steps including pre-processing, segmentation, feature extraction, classification. Pre-processing is for done the basic operation on input image like noise reduction which remove the noisy signal from image. Segmentation stage for segment the given image into line by line and segment each character from segmented line. Future extraction calculates the characteristics of character. A Radial Basis Function Neural Network (RBFNN) is used to classification contains the database and does the comparison.
Surveillance refers to the task of observing a scene, often for lengthy periods in search of particular objects or particular behaviour. This task has many applications, foremost among them is security (monitoring for undesirable behaviour such as theft or vandalism), but increasing numbers of others in areas such as agriculture also exist. Historically, closed circuit TV (CCTV) surveillance has been mundane and labour Intensive, involving personnel scanning multiple screens, but the advent of reasonably priced fast hardware means that automatic surveillance is becoming a realistic task to attempt in real time. Several attempts at this are underway.
SIMULATION OF ATMOSPHERIC POLLUTANTS DISPERSION IN AN URBAN ENVIRONMENTAM Publications
Interest in air pollution investigation of urban environment due to existence of industrial and commercial activities along with vehicular emission and existence of buildings and streets which setup natural barrier for pollutant dispersion in the urban environment has increased. The air pollution modelling is a multidisciplinary subject when the entire cities are taken under consideration where urban planning and geometries are complex which needs a large software packages to be developed like Operational Street Pollution Model (OSPM), California Line Source model (CALINE series) etc. On overviewing various works it can be summarized that the air pollutant dispersion in urban street canyons and all linked phenomenon such as wind flow, pollutant concentrations, temperature distribution etc. generally depend on wind speed and direction, building heights and density, road width, source and intensity of air pollution, meteorological variables like temperature, humidity etc. A unique and surprising case is observed every time on numerous combinations of these factors. The main aim of this study is to simulate the atmospheric pollutant dispersion for given pollutant like carbon monoxide, sulphur dioxide and nitrogen dioxide and given atmospheric conditions like wind speed and direction. Computational Fluid Dynamics (CFD) simulation for analysing the atmospheric pollutant dispersion is done after natural airflow analysis. Volume rendering is done for variables such as phase 2 volume fraction and velocity with resolution as 250 pixels per inch and transparency as 20%. It can be observed that all the three pollutant namely nitrogen dioxide, sulphur dioxide and carbon monoxide the phase 2 volume fraction changes from 0 to 1. The wind velocity changes from 3.395×10-13 m/s to 1.692×102 m/s. The dispersion of pollutants follow the sequence Sulphur dioxide>Carbon monoxide>Nitrogen dioxide.
PREPARATION AND EVALUATION OF WOOL KERATIN BASED CHITOSAN NANOFIBERS FOR AIR ...AM Publications
In this article, we have extracted keratin from deccani wool waste and prepared the wool keratin based Chitosan nanofibers by electrospinning technique. The prepared nanofibers mat were prepared with different weight percent ratio like 1wt.%, 3wt.% and 5wt.% with respect to polymer i.e Chitosan. The physicochemical and filtration properties of wool keratin based Chitosan nanofibers were studied. Wool keratin based Chitosan nanofibers were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), differential scanning calorimetry (DSC) and scanning electron microscopy (FESEM). The filtration efficiency of keratin Chitosan nanofibers were investigated through DOP test and heavy metal removal capacity of evaluated through Atomic absorption spectroscopy. FTIR results were showed that Keratin gets compatible with Chitosan. XRD patterns revealed keratin was in crystalline nature and increase the crystalline nature of Chitosan nanofibers. FESEM images showed that uniform nanofibers generation with average fiber diameter 80nm. Nanofibers filtration efficiency against a particulate matter in air was obtained more than 99.53% and excellent property of removal of heavy metal.
ANALYSIS ON LOAD BALANCING ALGORITHMS IMPLEMENTATION ON CLOUD COMPUTING ENVIR...AM Publications
Cloud computing means storing and accessing data and programs over the Internet instead of your computer's hard drive. The cloud is just a metaphor for the Internet. The elements involved in cloud computing are clients, data center and distributed server. One of the main problems in cloud computing is load balancing. Balancing the load means to distribute the workload among several nodes evenly so that no single node will be overloaded. Load can be of any type that is it can be CPU load, memory capacity or network load. In this paper we presented an architecture of load balancing and algorithm which will further improve the load balancing problem by minimizing the response time. In this paper, we have proposed the enhanced version of existing regulated load balancing approach for cloud computing by comping the Randomization and greedy load balancing algorithm. To check the performance of proposed approach, we have used the cloud analyst simulator (Cloud Analyst). Through simulation analysis, it has been found that proposed improved version of regulated load balancing approach has shown better performance in terms of cost, response time and data processing time.
A MODEL BASED APPROACH FOR IMPLEMENTING WLAN SECURITY AM Publications
This paper presents various security features and configurations commonly implemented in WLANs and their aggregated security levels and then proposes a model that enables implementation and evaluation of WLAN security
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Automobile Management System Project Report.pdfKamal Acharya
The proposed project is developed to manage the automobile in the automobile dealer company. The main module in this project is login, automobile management, customer management, sales, complaints and reports. The first module is the login. The automobile showroom owner should login to the project for usage. The username and password are verified and if it is correct, next form opens. If the username and password are not correct, it shows the error message.
When a customer search for a automobile, if the automobile is available, they will be taken to a page that shows the details of the automobile including automobile name, automobile ID, quantity, price etc. “Automobile Management System” is useful for maintaining automobiles, customers effectively and hence helps for establishing good relation between customer and automobile organization. It contains various customized modules for effectively maintaining automobiles and stock information accurately and safely.
When the automobile is sold to the customer, stock will be reduced automatically. When a new purchase is made, stock will be increased automatically. While selecting automobiles for sale, the proposed software will automatically check for total number of available stock of that particular item, if the total stock of that particular item is less than 5, software will notify the user to purchase the particular item.
Also when the user tries to sale items which are not in stock, the system will prompt the user that the stock is not enough. Customers of this system can search for a automobile; can purchase a automobile easily by selecting fast. On the other hand the stock of automobiles can be maintained perfectly by the automobile shop manager overcoming the drawbacks of existing system.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSEDuvanRamosGarzon1
AIRCRAFT GENERAL
The Single Aisle is the most advanced family aircraft in service today, with fly-by-wire flight controls.
The A318, A319, A320 and A321 are twin-engine subsonic medium range aircraft.
The family offers a choice of engines
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/