Instruksi spektro genesis 20
•Download as DOC, PDF•
0 likes•255 views
The document provides operational instructions for the THERMO SPECTRONIC Genesys 20 instrument. It lists steps for warming up the instrument, selecting the concentration mode and wavelength, zeroing the blank, entering the standard concentration to calculate a factor, and displaying the calculated sample concentration. It also provides contact information for a service center for laboratory equipment in Makassar, Indonesia.
Report
Share
Report
Share
![OPERATIONAL INSTRUCTION
THERMO SPECTRONIC Genesys 20
Before Use-
- Make sure instrument is secure and on a flat and stabile surface.
- make certain the instrument is not close to other strong EMF signals
- Instrument should have generous ventilation under and around the unit
1. Instrument should be turned on and allowed to warm up for 30 minutes.
2. Press [ A/T/C ] to select the Concentration mode. ( the current mode will
appear on the display)
3. Press [nm up] or [nm down] to select the wavelength
4. Insert your Blank into the cell ( pay attention to light path ) and close the
sample door
5. Press [0 ABS 100% T] to zero the blank, then remove the blank and insert
your standard
6. Press the STANDARD [soft key 1] and use the [scroll keys] to enter the
concentration of the standard, then press the SET C [soft key 2] to calculate
and display the factor for the selected standard.
7. Remove the standard and insert your sample into the cell holder. The
calculated sample concentration appears on the display.
Service Center Peralatan Laboratorium
Makassar Center Direct Current (MCDC) – www.mcdc-service.net.ms
Cp: 04115355765; 085342101996; 085255974396; 081355875684
e-mail: mcdc.service@yahoo.com](https://image.slidesharecdn.com/instruksispektrogenesis20-121217000115-phpapp01/85/Instruksi-spektro-genesis-20-1-320.jpg)
Recommended
Control precedence program
This document provides instructions for writing and testing programs on a PLC to give precedence to different sections of the program based on the order inputs are received. It covers creating a program that gives precedence to the first input received over others (Chapter 1-3), and another that gives precedence to the last input over previous ones (Chapters 4-5). The chapters guide the reader through writing the ladder logic programs, transferring them to a virtual PLC, running simulations to test the program's behavior, and ensuring it functions as intended by having the correct section take precedence based on input order.
Bd1 gantumur mon e 1
The document provides specifications for a program to control traffic light signals in response to a pushbutton. The signals are to initially flicker red at one-second intervals. When the pushbutton is pressed, an indicator will light for 5 seconds during which the red signal continues flickering. Then the signals will change as follows: red flickers for 5 more seconds, yellow lights for 5 seconds, green lights for 10 seconds, then returns to the initial red flickering. The document provides tips for writing the program in a ladder logic format and testing the control operations.
Laporan prakytikum kimia anorganik
pembuatan garam mohr dilakukan dengan cara kristalisasi dan larutannya berwarna bening, tetapi tidak terbentuk kristal.
Vlc by siddharth jhumat (m.tech cse)
This document summarizes a term paper on visible light communication (VLC) submitted by Siddharth Jhumat for their master's degree. The paper provides an introduction to VLC and discusses technologies like RONJA, LEDs, Li-Fi, and visible light spectrum data transmission. It covers VLC standards bodies and development kits, applications of VLC including indoor positioning and vehicle communications, and challenges of VLC like line of sight requirements.
Analisis makanan pada protein
Dokumen tersebut membahas tentang analisis protein pada daging sapi bali dan wagyu dengan metode SDS-PAGE. Protein diekstrak dari sampel daging, kemudian dipisahkan berdasarkan ukuran molekulnya menggunakan elektroforesis gel poliakrilamida dengan SDS untuk memecah struktur sekunder protein. Hasilnya menghasilkan pola protein berupa pita-pita yang kemudian dihitung nilai Rf-nya.
PENGGUNAAN NILAI SKALA KEABUAN DARI CITRA WATERMARK SEBAGAI CETAK BIRU DARI V...
Visible watermarking adalah salah satu proses pada pengolahan citra digital yang memproses dua buah citra. Satu citra sebagai citra utama dan yang lainnya adalah citra watermark. Citra watermark dilekatkan pada citra utama. Biasanya, proses visible watermarking dilakukan dengan proses image blending yang mencampurkan kedua citra. Pada kenyataan yang lain, citra watermark, yang telah diproses menjadi citra grayscale, mempunyai nilai intensitas yang bervariasi yang dapat dijadikan sebagai cetak biru dari watermark. Setiap piksel pada citra utama akan dinaikkan atau diturunkan sesuai dengan nilai piksel yang bersesuaian. Intensitas terkecil dari citra watermark dapat digunakan untuk menentukan titik proses penandaan, dan dapat digeser dengan nilai K yang ditentukan oleh operator. Dengan mempergunakan metode ini diharapkan citra yang di watermark tetap memberikan informasi yang diperlukan tanpa terganggu adanya penempelan citra watermark pada citra tersebut secara kasat mata.
Recommended
Control precedence program
This document provides instructions for writing and testing programs on a PLC to give precedence to different sections of the program based on the order inputs are received. It covers creating a program that gives precedence to the first input received over others (Chapter 1-3), and another that gives precedence to the last input over previous ones (Chapters 4-5). The chapters guide the reader through writing the ladder logic programs, transferring them to a virtual PLC, running simulations to test the program's behavior, and ensuring it functions as intended by having the correct section take precedence based on input order.
Bd1 gantumur mon e 1
The document provides specifications for a program to control traffic light signals in response to a pushbutton. The signals are to initially flicker red at one-second intervals. When the pushbutton is pressed, an indicator will light for 5 seconds during which the red signal continues flickering. Then the signals will change as follows: red flickers for 5 more seconds, yellow lights for 5 seconds, green lights for 10 seconds, then returns to the initial red flickering. The document provides tips for writing the program in a ladder logic format and testing the control operations.
Laporan prakytikum kimia anorganik
pembuatan garam mohr dilakukan dengan cara kristalisasi dan larutannya berwarna bening, tetapi tidak terbentuk kristal.
Vlc by siddharth jhumat (m.tech cse)
This document summarizes a term paper on visible light communication (VLC) submitted by Siddharth Jhumat for their master's degree. The paper provides an introduction to VLC and discusses technologies like RONJA, LEDs, Li-Fi, and visible light spectrum data transmission. It covers VLC standards bodies and development kits, applications of VLC including indoor positioning and vehicle communications, and challenges of VLC like line of sight requirements.
Analisis makanan pada protein
Dokumen tersebut membahas tentang analisis protein pada daging sapi bali dan wagyu dengan metode SDS-PAGE. Protein diekstrak dari sampel daging, kemudian dipisahkan berdasarkan ukuran molekulnya menggunakan elektroforesis gel poliakrilamida dengan SDS untuk memecah struktur sekunder protein. Hasilnya menghasilkan pola protein berupa pita-pita yang kemudian dihitung nilai Rf-nya.
PENGGUNAAN NILAI SKALA KEABUAN DARI CITRA WATERMARK SEBAGAI CETAK BIRU DARI V...
Visible watermarking adalah salah satu proses pada pengolahan citra digital yang memproses dua buah citra. Satu citra sebagai citra utama dan yang lainnya adalah citra watermark. Citra watermark dilekatkan pada citra utama. Biasanya, proses visible watermarking dilakukan dengan proses image blending yang mencampurkan kedua citra. Pada kenyataan yang lain, citra watermark, yang telah diproses menjadi citra grayscale, mempunyai nilai intensitas yang bervariasi yang dapat dijadikan sebagai cetak biru dari watermark. Setiap piksel pada citra utama akan dinaikkan atau diturunkan sesuai dengan nilai piksel yang bersesuaian. Intensitas terkecil dari citra watermark dapat digunakan untuk menentukan titik proses penandaan, dan dapat digeser dengan nilai K yang ditentukan oleh operator. Dengan mempergunakan metode ini diharapkan citra yang di watermark tetap memberikan informasi yang diperlukan tanpa terganggu adanya penempelan citra watermark pada citra tersebut secara kasat mata.
Manual MH9 CO2 MCOHOME
This document is a user manual for the MCOHome CO2 Monitor. It describes the device's specifications such as its CO2 detection range, temperature and humidity ranges, and dimensions. It provides instructions on installing the device, including recommended locations and wiring diagrams. It also explains how to operate the device, including setting the local time, calibrating sensors, and including/excluding the device from a Z-Wave network.
CNC Operator WBT
The document provides instructions for operating a Haas CNC machine. It outlines the key steps a student must demonstrate to complete the CNC Machine Operator Program, including pre-start checks, loading tools, running a program, and shutting down the machine. The goal of the program is for students to learn how to independently operate a Haas CNC controller and pass a practice exam with a score of 85% or higher.
Instruction manual for dhr v2.2
This document provides instructions for calibrating and operating a UNIT TEST DHR2000 compression test machine. It describes setting up the machine, performing tests on different sample types, and transferring test results to a computer. The calibration section explains how to calibrate the machine's transducers using a zero and span adjustment procedure. Maintenance instructions and specifications for the DHR2000 are also included.
Manual SEC_SCS317 secure
This document provides instructions for setting up and operating a 7 Day Programmable Room Thermostat that communicates wirelessly using Z-Wave technology. The thermostat can control central heating and allows the user to set up to 6 temperature schedules per day. It includes devices in existing Z-Wave networks and supports functions like temperature overrides, associations to control other devices, and basic operation as a primary controller.
Mh7 eu um v.02
The document provides a user manual for the MCOHome Water/Electrical Heating Thermostat. It describes the thermostat's features such as capacitive touch buttons and temperature control capabilities. It also provides instructions on installation, wiring, operation in manual and automatic modes, time period settings, and includes safety information.
User manual-475876
1) The document provides an operating manual for the SAGA1-L10 Industrial Remote Controller made by Gain Electronic Co., Ltd. It details specifications, parts, operation instructions, troubleshooting tips, and warranty information.
2) Warranty covers defects in materials and manufacturing for one year from shipment. The buyer pays shipping to Gain for repairs, while Gain pays return shipping. The warranty excludes consumable parts and defects caused by improper installation, maintenance, modification, operation, or software/interfacing.
3) Precautions for installing the receiver include placing it as far as possible from frequency inverters and power cables to avoid interference, and mounting it on top of the electrical control box rather than inside.
L32 w831 service_manual
This document provides specifications and instructions for a 32-inch LCD TV made by AOC, model L32W831. It includes sections on safety notices, general specifications, operating instructions, input/output specifications, and repair information. The general specifications section lists details like the screen size, resolution, brightness, audio outputs. The operating instructions section explains how to use the remote control, menus and connect external devices.
Xmtg 8000
The document provides operation instructions for the XMT-8000 switch power intelligent digital-display controller. It describes cautions for operation and cleaning, how to confirm the product code, installation instructions including dimensions and technical performance, wiring details, panel allocation and functions, operation instructions for changing set temperature and internal parameters, and information on repair and storage. The document is intended to guide users on correctly using and maintaining the XMT-8000 controller.
Hướng dẫn sử dụng máy đo đa năng Testo 435
Hướng dẫn sử dụng máy đo đa năng Testo 435 đo nhiệt độ độ ẩm, đo áp suất, tốc độ gió...
Máy đo áp suất đa năng Testo 435: https://testostore.vn/san-pham/dong-ho-do-da-nang-testo-435-3/
Máy đo nhiệt độ bề mặt: https://testostore.vn/danh-muc/do-nhiet-do-do-am/do-nhiet-do-be-mat/
Website: testostore.vn
Hotline: 0914222214
Email: info@thietbido.us , info@tenmars.vn
Mh8 fc um
This document is a user manual for the MCOHome Fan Coil Thermostat, a Z-Wave enabled device for indoor temperature control in a 2-pipe fan coil system. It can automatically control fan speed based on temperature difference and is reliable and practical. Key features include capacitive touch buttons, precise temperature calibration, and intelligent fan and valve control. It has an AC power supply, displays temperature accurately to 0.1 degrees Celsius, and has a dimension of 86x86x42mm. Installation instructions provide guidelines on location and wiring. The manual also describes the thermostat's settings, parameters, Z-Wave functionality, and 1-year limited warranty.
Erbe icc-80-50-icc-service-manual
The document provides details on test programs that can be run on ERBE ICC 50, ICC 80, and ICC BIPOLAR electrosurgical units, including programs to check components, calibrate outputs, and set user preferences. It also lists error codes that the units can display, providing explanations of possible issues and guidance on troubleshooting and resolving problems.
Hướng dẫn sử dụng testo 435-3
Hướng dẫn sử dụng testo 435-3
https://testostore.vn/danh-muc/do-ap-suat/may-do-ap-suat-vi-sai/
https://testostore.vn/san-pham/dong-ho-do-da-nang-testo-435-3/
Hướng dẫn sử dụng Testo 435-3
Hướng dẫn sử dụng Testo 435-3
https://testostore.vn/san-pham/dong-ho-do-da-nang-testo-435-3/
https://testostore.vn/danh-muc/do-ap-suat/may-do-ap-suat-vi-sai/
Extech Vibration Tester
The document provides a user guide for the Extech 407860 Vibration Meter. It describes the meter's features for measuring vibration levels in industrial machinery. The guide covers how to connect the supplied vibration probe, select measurement units and functions, use data logging features, view stored readings, and transfer data to a PC. The meter measures vibration displacement, velocity and acceleration within ISO standards.
Extech 407860
The document provides a user guide for the Extech 407860 Vibration Meter. It describes the meter's features for measuring vibration levels in industrial machinery. The guide outlines how to operate the meter, including connecting probes, selecting measurement modes, logging data, and transferring data to a computer. The meter measures vibration displacement, velocity and acceleration to help identify issues like misalignment or structural problems.
Xtool x100-pad-manual
1. This manual is designed for the usage of XTOOL X100 PAD Tablet, applying to X-100 PAD automotive diagnosis platform.
No part of this manual can be reproduced, stored in a retrieval system or transmitted, in any form or by any means (electronic, mechanical,photocopying, recording, or otherwise), without the prior written permission of
Manual solar siren - popp_005107
This document provides instructions for installing and operating a solar-powered outdoor siren that communicates using Z-Wave technology. The siren receives power from a solar panel and internal battery, and can be controlled wirelessly. It includes an alarm with flashing light and reports temperature. The document outlines how to include the device in a Z-Wave network and configure its behavior and sensor reporting settings.
Manual of Thermostat Fan Coil 4Pipes MH8 series - MCO HOME
The document is a user manual for the MCOHome Fan Coil Thermostat, a Z-Wave enabled device for indoor temperature control in a 4-pipe fan coil system. It can automatically control fan speed based on temperature difference and read temperature and time. The manual describes features like touch buttons, temperature calibration, memory backup, and intelligent fan and valve control. It provides specifications, safety information, installation instructions, and explains how to operate, set parameters and configure the thermostat for a Z-Wave network.
IOS/Android Touch lcd gsm alarm system LS-GSM-215
LS-GSM-215 is an affordable and easy-to-use GSM alarm system for all types of space control: summer cottages, apartments, offices, warehouses, garages, convenience stores, financial room , villas,boats, and mobile homes.
Uv820 usb3.0 user manual 2014.7.14
This document provides instructions for using a USB3.0 HD color video camera. It contains 3 sections:
1. An overview of the camera accessories, fast installation instructions, and camera highlights.
2. Explanations of the camera interfaces, remote controller, and IR remote controller usage.
3. Details on the RS-232 interface and VISCA protocol commands for controlling the camera.
Juknis_DUPAK.pptx
Panduan : Aplikasi Jabatan Fungsional
Perbendaharaan (E-Jafung)
oleh : Subdit SPKPP DSP Ditjen Perbendaharaan Kemenkeu
More Related Content
Similar to Instruksi spektro genesis 20
Manual MH9 CO2 MCOHOME
This document is a user manual for the MCOHome CO2 Monitor. It describes the device's specifications such as its CO2 detection range, temperature and humidity ranges, and dimensions. It provides instructions on installing the device, including recommended locations and wiring diagrams. It also explains how to operate the device, including setting the local time, calibrating sensors, and including/excluding the device from a Z-Wave network.
CNC Operator WBT
The document provides instructions for operating a Haas CNC machine. It outlines the key steps a student must demonstrate to complete the CNC Machine Operator Program, including pre-start checks, loading tools, running a program, and shutting down the machine. The goal of the program is for students to learn how to independently operate a Haas CNC controller and pass a practice exam with a score of 85% or higher.
Instruction manual for dhr v2.2
This document provides instructions for calibrating and operating a UNIT TEST DHR2000 compression test machine. It describes setting up the machine, performing tests on different sample types, and transferring test results to a computer. The calibration section explains how to calibrate the machine's transducers using a zero and span adjustment procedure. Maintenance instructions and specifications for the DHR2000 are also included.
Manual SEC_SCS317 secure
This document provides instructions for setting up and operating a 7 Day Programmable Room Thermostat that communicates wirelessly using Z-Wave technology. The thermostat can control central heating and allows the user to set up to 6 temperature schedules per day. It includes devices in existing Z-Wave networks and supports functions like temperature overrides, associations to control other devices, and basic operation as a primary controller.
Mh7 eu um v.02
The document provides a user manual for the MCOHome Water/Electrical Heating Thermostat. It describes the thermostat's features such as capacitive touch buttons and temperature control capabilities. It also provides instructions on installation, wiring, operation in manual and automatic modes, time period settings, and includes safety information.
User manual-475876
1) The document provides an operating manual for the SAGA1-L10 Industrial Remote Controller made by Gain Electronic Co., Ltd. It details specifications, parts, operation instructions, troubleshooting tips, and warranty information.
2) Warranty covers defects in materials and manufacturing for one year from shipment. The buyer pays shipping to Gain for repairs, while Gain pays return shipping. The warranty excludes consumable parts and defects caused by improper installation, maintenance, modification, operation, or software/interfacing.
3) Precautions for installing the receiver include placing it as far as possible from frequency inverters and power cables to avoid interference, and mounting it on top of the electrical control box rather than inside.
L32 w831 service_manual
This document provides specifications and instructions for a 32-inch LCD TV made by AOC, model L32W831. It includes sections on safety notices, general specifications, operating instructions, input/output specifications, and repair information. The general specifications section lists details like the screen size, resolution, brightness, audio outputs. The operating instructions section explains how to use the remote control, menus and connect external devices.
Xmtg 8000
The document provides operation instructions for the XMT-8000 switch power intelligent digital-display controller. It describes cautions for operation and cleaning, how to confirm the product code, installation instructions including dimensions and technical performance, wiring details, panel allocation and functions, operation instructions for changing set temperature and internal parameters, and information on repair and storage. The document is intended to guide users on correctly using and maintaining the XMT-8000 controller.
Hướng dẫn sử dụng máy đo đa năng Testo 435
Hướng dẫn sử dụng máy đo đa năng Testo 435 đo nhiệt độ độ ẩm, đo áp suất, tốc độ gió...
Máy đo áp suất đa năng Testo 435: https://testostore.vn/san-pham/dong-ho-do-da-nang-testo-435-3/
Máy đo nhiệt độ bề mặt: https://testostore.vn/danh-muc/do-nhiet-do-do-am/do-nhiet-do-be-mat/
Website: testostore.vn
Hotline: 0914222214
Email: info@thietbido.us , info@tenmars.vn
Mh8 fc um
This document is a user manual for the MCOHome Fan Coil Thermostat, a Z-Wave enabled device for indoor temperature control in a 2-pipe fan coil system. It can automatically control fan speed based on temperature difference and is reliable and practical. Key features include capacitive touch buttons, precise temperature calibration, and intelligent fan and valve control. It has an AC power supply, displays temperature accurately to 0.1 degrees Celsius, and has a dimension of 86x86x42mm. Installation instructions provide guidelines on location and wiring. The manual also describes the thermostat's settings, parameters, Z-Wave functionality, and 1-year limited warranty.
Erbe icc-80-50-icc-service-manual
The document provides details on test programs that can be run on ERBE ICC 50, ICC 80, and ICC BIPOLAR electrosurgical units, including programs to check components, calibrate outputs, and set user preferences. It also lists error codes that the units can display, providing explanations of possible issues and guidance on troubleshooting and resolving problems.
Hướng dẫn sử dụng testo 435-3
Hướng dẫn sử dụng testo 435-3
https://testostore.vn/danh-muc/do-ap-suat/may-do-ap-suat-vi-sai/
https://testostore.vn/san-pham/dong-ho-do-da-nang-testo-435-3/
Hướng dẫn sử dụng Testo 435-3
Hướng dẫn sử dụng Testo 435-3
https://testostore.vn/san-pham/dong-ho-do-da-nang-testo-435-3/
https://testostore.vn/danh-muc/do-ap-suat/may-do-ap-suat-vi-sai/
Extech Vibration Tester
The document provides a user guide for the Extech 407860 Vibration Meter. It describes the meter's features for measuring vibration levels in industrial machinery. The guide covers how to connect the supplied vibration probe, select measurement units and functions, use data logging features, view stored readings, and transfer data to a PC. The meter measures vibration displacement, velocity and acceleration within ISO standards.
Extech 407860
The document provides a user guide for the Extech 407860 Vibration Meter. It describes the meter's features for measuring vibration levels in industrial machinery. The guide outlines how to operate the meter, including connecting probes, selecting measurement modes, logging data, and transferring data to a computer. The meter measures vibration displacement, velocity and acceleration to help identify issues like misalignment or structural problems.
Xtool x100-pad-manual
1. This manual is designed for the usage of XTOOL X100 PAD Tablet, applying to X-100 PAD automotive diagnosis platform.
No part of this manual can be reproduced, stored in a retrieval system or transmitted, in any form or by any means (electronic, mechanical,photocopying, recording, or otherwise), without the prior written permission of
Manual solar siren - popp_005107
This document provides instructions for installing and operating a solar-powered outdoor siren that communicates using Z-Wave technology. The siren receives power from a solar panel and internal battery, and can be controlled wirelessly. It includes an alarm with flashing light and reports temperature. The document outlines how to include the device in a Z-Wave network and configure its behavior and sensor reporting settings.
Manual of Thermostat Fan Coil 4Pipes MH8 series - MCO HOME
The document is a user manual for the MCOHome Fan Coil Thermostat, a Z-Wave enabled device for indoor temperature control in a 4-pipe fan coil system. It can automatically control fan speed based on temperature difference and read temperature and time. The manual describes features like touch buttons, temperature calibration, memory backup, and intelligent fan and valve control. It provides specifications, safety information, installation instructions, and explains how to operate, set parameters and configure the thermostat for a Z-Wave network.
IOS/Android Touch lcd gsm alarm system LS-GSM-215
LS-GSM-215 is an affordable and easy-to-use GSM alarm system for all types of space control: summer cottages, apartments, offices, warehouses, garages, convenience stores, financial room , villas,boats, and mobile homes.
Uv820 usb3.0 user manual 2014.7.14
This document provides instructions for using a USB3.0 HD color video camera. It contains 3 sections:
1. An overview of the camera accessories, fast installation instructions, and camera highlights.
2. Explanations of the camera interfaces, remote controller, and IR remote controller usage.
3. Details on the RS-232 interface and VISCA protocol commands for controlling the camera.
Similar to Instruksi spektro genesis 20 (20)
Manual of Thermostat Fan Coil 4Pipes MH8 series - MCO HOME
Manual of Thermostat Fan Coil 4Pipes MH8 series - MCO HOME
More from neoxyline
Juknis_DUPAK.pptx
Panduan : Aplikasi Jabatan Fungsional
Perbendaharaan (E-Jafung)
oleh : Subdit SPKPP DSP Ditjen Perbendaharaan Kemenkeu
KARAKTERISTIK KIMIA DAN FISIKA SEMEN POZOLAN KAPUR YANG DIPERKAYA SILIKA ABU...
[Ringkasan]
Penelitian ini bertujuan untuk mengetahui karakteristik kimia dan fisika Semen Pozolan Kapur (SPK) yang diperkaya dengan silika dari Abu Sekam Padi (ASP) dengan variasi penambahan ASP sebesar 0%, 5%, 10%, 15%, dan 20%. Hasil penelitian menunjukkan bahwa penambahan ASP meningkatkan kandungan SiO2 dan menurunkan kandungan SO3 serta MgO pada SPK. Penambahan ASP sebesar 15% memberikan kuat tekan beton tert
Ebook Jarimatika
Buku panduan ini menjelaskan metode Jarimatika untuk mengajarkan ketrampilan berhitung kepada anak-anak dengan cara yang mudah dan menyenangkan menggunakan jari-jari tangan sebagai alat bantu visual. Metode ini memperkenalkan lambang-lambang bilangan dan operasi hitung dasar seperti penjumlahan dan pengurangan melalui gerakan jari. Contoh soal sederhana juga diberikan untuk latihan.
Instruksi polax 2 l (atago)
The document provides instructions for using a Polax 2L polarimeter to measure specific rotation of samples. Key steps include: setting the front panel display to 0.00, rinsing and filling the observation tube with sample solution, checking for bubbles, placing the tube in the polarimeter and adjusting brightness of fields, recording the angle of rotation and calculating specific rotation using a provided formula.
Ampuni aku ya robbi, maafkan kata kataku
Teks ini menceritakan kisah seorang mantan petugas bea cukai yang meninggalkan pekerjaannya karena menyadari perbuatannya yang haram. Ia kemudian mengalami berbagai cobaan seperti kemiskinan dan kehilangan anaknya. Suatu malam ia mengutarakan kekesalannya karena doanya selama ini tidak dikabulkan Allah dan berniat berhenti beribadah. Ia kemudian bermimpi bertemu dengan Allah yang mengungkap
More from neoxyline (9)
KARAKTERISTIK KIMIA DAN FISIKA SEMEN POZOLAN KAPUR YANG DIPERKAYA SILIKA ABU...
KARAKTERISTIK KIMIA DAN FISIKA SEMEN POZOLAN KAPUR YANG DIPERKAYA SILIKA ABU...
Recently uploaded
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
20240609 QFM020 Irresponsible AI Reading List May 2024
Everything I found interesting about the irresponsible use of machine intelligence in May 2024
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Uni Systems Copilot event_05062024_C.Vlachos.pdf
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
Essentials of Automations: The Art of Triggers and Actions in FME
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
Video Streaming: Then, Now, and in the Future
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Infrastructure Challenges in Scaling RAG with Custom AI models
Building Retrieval-Augmented Generation (RAG) systems with open-source and custom AI models is a complex task. This talk explores the challenges in productionizing RAG systems, including retrieval performance, response synthesis, and evaluation. We’ll discuss how to leverage open-source models like text embeddings, language models, and custom fine-tuned models to enhance RAG performance. Additionally, we’ll cover how BentoML can help orchestrate and scale these AI components efficiently, ensuring seamless deployment and management of RAG systems in the cloud.
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
Recently uploaded (20)
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
20240609 QFM020 Irresponsible AI Reading List May 2024
20240609 QFM020 Irresponsible AI Reading List May 2024
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
Essentials of Automations: The Art of Triggers and Actions in FME
Essentials of Automations: The Art of Triggers and Actions in FME
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Infrastructure Challenges in Scaling RAG with Custom AI models
Infrastructure Challenges in Scaling RAG with Custom AI models
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
Instruksi spektro genesis 20
- 1. OPERATIONAL INSTRUCTION THERMO SPECTRONIC Genesys 20 Before Use- - Make sure instrument is secure and on a flat and stabile surface. - make certain the instrument is not close to other strong EMF signals - Instrument should have generous ventilation under and around the unit 1. Instrument should be turned on and allowed to warm up for 30 minutes. 2. Press [ A/T/C ] to select the Concentration mode. ( the current mode will appear on the display) 3. Press [nm up] or [nm down] to select the wavelength 4. Insert your Blank into the cell ( pay attention to light path ) and close the sample door 5. Press [0 ABS 100% T] to zero the blank, then remove the blank and insert your standard 6. Press the STANDARD [soft key 1] and use the [scroll keys] to enter the concentration of the standard, then press the SET C [soft key 2] to calculate and display the factor for the selected standard. 7. Remove the standard and insert your sample into the cell holder. The calculated sample concentration appears on the display. Service Center Peralatan Laboratorium Makassar Center Direct Current (MCDC) – www.mcdc-service.net.ms Cp: 04115355765; 085342101996; 085255974396; 081355875684 e-mail: mcdc.service@yahoo.com