Institute of mechanics, materials, and civil enginering -UCL- Lab'InSight Biomass to Energy
•
1 like•661 views
The document summarizes the fields of expertise and industrial targets of the Institute of Mechanics, Materials, and Civil Engineering (iMMC/TFL) laboratory at UCL, Louvain-la-Neuve. The laboratory conducts research on thermochemical conversion of biomass through pyrolysis, gasification, and combustion processes. This research aims to enable renewable electricity production, combined heat and power applications, and fuel production. The document provides examples of projects on gasification, ash deposition testing, pyrolysis modeling, and biomass combustion modeling.
Report
Share
Report
Share
Download to read offline
Recommended
336 d. ciragoglu
This document discusses capturing carbon dioxide (CO2) from power plant flue gas and depositing it underground. It analyzes depositing the waste gas from a power plant in Sırnak, Turkey underground. The goals are to store the CO2 in underground coal mines and use the space. Models show the CO2 capture costs decrease when combined with coal bed methane extraction, as the methane enhances CO2 sequestration in excavated coal seams. With projected methane yields of 200,000 cubic meters per year, CO2 capture and storage costs could drop to around $11 per ton of CO2.
WTE
This document summarizes a proposed 12 MW waste to energy project in Ghazipur, Delhi that would convert 1300 tons per day of municipal solid waste into refuse derived fuel (RDF) to generate electricity. The key aspects of the project include an RDF plant that would produce RDF from mixed waste, and a power plant next to the RDF plant that would use the RDF to generate 12 MW of electricity. An environmental management plan is also outlined to control issues like odor, noise, leachate treatment, and air pollution management.
Peter Balslev, SUEZ Environment - PhosphoGreen – experiences and success story
Peter Balslev, SUEZ Environment - PhosphoGreen – experiences and success storyMaa- ja metsätalousministeriö
Ravinteet kiertoon – vesistöt kuntoon | Kiertotalouden kärkihankkeen lähtölaukaus | Recycle nutrients for clear waters | Forum for Action 19.– 20.4.2016Engr. Syed shahbaz Shah 2
This document discusses clean coal technology for reducing pollution from coal-fired power plants. It describes three categories of clean coal technology: pre-combustion (e.g. coal washing), combustion (e.g. fluidized bed combustion), and post-combustion (e.g. carbon capture and storage, flue gas desulfurization). Adopting clean coal technology offers significant benefits by reducing air pollutants like particulate matter, sulfur dioxide, and nitrogen oxides emitted from burning coal to generate electricity.
Sustainability Briefing - facts and figures
This handout was given to journalists who attended the Sustainability and Green Games media briefing on Monday 9 July in Westminster, London.
Environment Secretary Rt Hon Caroline Spelman MP and GOC Director of Communications, Godric Smith, lead the briefing.
The pack contains background information about London 2012, which has set out to be the greenest Games of modern times.
Tel +44 (0)20 7271 1700
Web www.goc2012.culture.gov.uk
Email mediaenquiries@goc2012.gsi.gov.uk
Twitter @2012govpress
2018 ACEME Presentation as given at Newcastle Australia
This document summarizes a presentation given on March 13, 2018 in Newcastle, Australia about carbon dioxide (CO2) mineralization. The presentation discussed the past, present, and future of CO2 mineralization. In the past, academic and industrial projects explored using CO2 mineralization but were not economically feasible. Currently, the CO2MIN project is investigating CO2 mineralization through funding from the German government. Other current projects are setting up autoclaves and validating uses of mineralized CO2 in polymers and paper manufacturing. Future plans include participating in the CO2MIN project and developing continuous CO2 mineralization processes.
2018 Geleen University Maastricht
This presentation discusses using CO2 as a feedstock by mineralizing it through reactions with olivine. The process could help address climate change by providing permanent storage of CO2 emissions in minerals. While mineralization occurs slowly through natural weathering, the presentation describes approaches to intensify the reaction through milling, acids, or high pressure and heat in a reactor. Initial testing of the reactor process shows potential to mineralize CO2 while generating heat, and the resulting products may be used in concrete, paper, or polymers. Further research and scaling up of the mineralization technology is needed, but it offers circular economy benefits by converting the waste product of CO2 into useful materials.
Belgian offshore wind potential
Very nice presentation done on the Belgian offshore wind potential. It has been done by a student in the "Sustainable energy class" that I am giving at the ULiège. http://blogs.ulg.ac.be/damien-ernst/genv0002-1-sustainable-energy/
Recommended
336 d. ciragoglu
This document discusses capturing carbon dioxide (CO2) from power plant flue gas and depositing it underground. It analyzes depositing the waste gas from a power plant in Sırnak, Turkey underground. The goals are to store the CO2 in underground coal mines and use the space. Models show the CO2 capture costs decrease when combined with coal bed methane extraction, as the methane enhances CO2 sequestration in excavated coal seams. With projected methane yields of 200,000 cubic meters per year, CO2 capture and storage costs could drop to around $11 per ton of CO2.
WTE
This document summarizes a proposed 12 MW waste to energy project in Ghazipur, Delhi that would convert 1300 tons per day of municipal solid waste into refuse derived fuel (RDF) to generate electricity. The key aspects of the project include an RDF plant that would produce RDF from mixed waste, and a power plant next to the RDF plant that would use the RDF to generate 12 MW of electricity. An environmental management plan is also outlined to control issues like odor, noise, leachate treatment, and air pollution management.
Peter Balslev, SUEZ Environment - PhosphoGreen – experiences and success story
Peter Balslev, SUEZ Environment - PhosphoGreen – experiences and success storyMaa- ja metsätalousministeriö
Ravinteet kiertoon – vesistöt kuntoon | Kiertotalouden kärkihankkeen lähtölaukaus | Recycle nutrients for clear waters | Forum for Action 19.– 20.4.2016Engr. Syed shahbaz Shah 2
This document discusses clean coal technology for reducing pollution from coal-fired power plants. It describes three categories of clean coal technology: pre-combustion (e.g. coal washing), combustion (e.g. fluidized bed combustion), and post-combustion (e.g. carbon capture and storage, flue gas desulfurization). Adopting clean coal technology offers significant benefits by reducing air pollutants like particulate matter, sulfur dioxide, and nitrogen oxides emitted from burning coal to generate electricity.
Sustainability Briefing - facts and figures
This handout was given to journalists who attended the Sustainability and Green Games media briefing on Monday 9 July in Westminster, London.
Environment Secretary Rt Hon Caroline Spelman MP and GOC Director of Communications, Godric Smith, lead the briefing.
The pack contains background information about London 2012, which has set out to be the greenest Games of modern times.
Tel +44 (0)20 7271 1700
Web www.goc2012.culture.gov.uk
Email mediaenquiries@goc2012.gsi.gov.uk
Twitter @2012govpress
2018 ACEME Presentation as given at Newcastle Australia
This document summarizes a presentation given on March 13, 2018 in Newcastle, Australia about carbon dioxide (CO2) mineralization. The presentation discussed the past, present, and future of CO2 mineralization. In the past, academic and industrial projects explored using CO2 mineralization but were not economically feasible. Currently, the CO2MIN project is investigating CO2 mineralization through funding from the German government. Other current projects are setting up autoclaves and validating uses of mineralized CO2 in polymers and paper manufacturing. Future plans include participating in the CO2MIN project and developing continuous CO2 mineralization processes.
2018 Geleen University Maastricht
This presentation discusses using CO2 as a feedstock by mineralizing it through reactions with olivine. The process could help address climate change by providing permanent storage of CO2 emissions in minerals. While mineralization occurs slowly through natural weathering, the presentation describes approaches to intensify the reaction through milling, acids, or high pressure and heat in a reactor. Initial testing of the reactor process shows potential to mineralize CO2 while generating heat, and the resulting products may be used in concrete, paper, or polymers. Further research and scaling up of the mineralization technology is needed, but it offers circular economy benefits by converting the waste product of CO2 into useful materials.
Belgian offshore wind potential
Very nice presentation done on the Belgian offshore wind potential. It has been done by a student in the "Sustainable energy class" that I am giving at the ULiège. http://blogs.ulg.ac.be/damien-ernst/genv0002-1-sustainable-energy/
Business Profile of Indosafe Pratama (2014)
Quality Training, Inspection and Consulting Service Provider
Head Office : Balikpapan
Sentra Eropa I, Balikpapan Baru, Block AA-4 No.30
Balikpapan – East Kalimantan 76114
Telp. (+62 542) 878618, 878619
Fax. (+62 542) 873450
Email: info@indosafepratama.com
Jakarta Office
Nucira Building 1st Floor
Jl. MT Haryono Kav.27, South Jakarta 12820
Telp. (+62 21) 83781381 /82/ 83
Fax. (+62 21) 8294055
Email: jkt.info@indosafepratama.com
Batam Office
Dana Graha Building Suite 522
Jl. Imam Bonjol, Nagoya – Batam 29433
Telp. (+62 778) 433567, 455831
Fax. (+62 778) 433073
Email: btm.info@indosafepratama.com
Surabaya Office
Bumi Mandiri Tower II Suite 810
Jl. Panglima Sudirman No.68, Surabaya 60271
Telp. (+62 31) 5311909
Fax. (+62 31) 5311809
Email: sby.info@indosafepratama.com
Natural Energy Field Services
Learn more about Natural Energy Field Services and what we offer. Among our services you can find construction inspection, quality control, surveying, land/row, and safety
Rubber wood
The document discusses rubber wood finger joint board, an eco-friendly material. Rubber wood comes from rubber trees grown in plantations, making use of trees that have already served as rubber producers. It is considered environmentally friendly as a recycled wood. Rubber wood finger jointing is a technique where cuts are made in two pieces of rubber wood timber and glued together, producing a strong joint and allowing for larger surfaces to be glued. Rubber wood finger joint boards can be used for various applications like table tops, floors, doors, and furniture.
5. civil engineering textile
Geotextiles are permeable textiles used in civil engineering applications to improve the performance of soils. They are made from natural fibers like jute or synthetic polymers like polypropylene and polyester. Geotextiles serve functions like separation, reinforcement, drainage, and filtration. They are used in applications such as roads, erosion control, retaining walls, and drainage systems. The properties and performance of geotextiles depend on factors like material composition, mechanical strength, permeability, and resistance to degradation. Polypropylene is commonly used due to its chemical resistance while polyester has better strength and creep resistance for demanding applications. The suitable fiber depends on the specific geotextile application and requirements.
The science and technology of civil engineering materials young 2
The document discusses the benefits of exercise for mental health. It notes that regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help boost feelings of calmness and happiness.
Bricks lecutre
The document discusses bricks and their use in civil engineering materials. It begins by defining bricks as blocks made from clay that are molded, dried, and burned. It then classifications bricks based on their production method, burning level, intended use, and crushing strength. The document also discusses the historical development of bricks, the ingredients required for good brick clay, and the manufacturing process which includes preparing the clay, molding, drying, and burning the bricks in a kiln.
107 quality control
The document discusses quality control in construction. It outlines that designers, manufacturers, and contractors must ensure minimum quality standards are met. It discusses ISO 9001 and 14000 quality assurance standards. It also describes the roles and responsibilities of quality inspectors, testing staff, and assurance programs in ensuring construction quality.
Civil engineering materials & Construction - Soil explorations
This document provides information about site investigation and ground improvement techniques. It discusses the importance of site investigation, which involves preliminary investigations like reconnaissance and studying maps to understand soil conditions. Methods of site exploration include direct methods like test pits and indirect methods like the standard penetration test. The document also covers ground improvement techniques, noting the importance of determining a soil's safe bearing capacity. It discusses methods to test bearing capacity, like plate loading tests, and techniques to improve poor soils, as governed by relevant Indian Standards.
Top eco friendly construction materials
There are several eco-friendly materials commonly used in construction that help make homes more energy efficient and environmentally friendly. These include recycled steel, which can save up to 75% of the energy used to produce normal steel; wood-plastic composite lumber, which is more durable than treated wood; insulating concrete forms that can reduce energy consumption in buildings by 20%; and low-emissivity windows that help insulate homes and can lower heating and cooling costs by 20%. Using these materials can help homeowners save up to 45% on energy costs and be part of the green building trend.
Eco friendly packaging materials
The document discusses sustainable packaging materials and options. It notes that packaging should be reusable, recyclable, minimize materials used and energy for production. Some eco-friendly materials mentioned include bioplastics, recycled paper, forest wood, palm leaf, corn starch, coconut husk and bamboo. Recycled materials like corrugated cartons, glass, steel and paperboard are highlighted. The benefits of materials like bioplastics, recycled paper, forest wood, palm leaf, corn starch, green wrap and bamboo are outlined. The document also briefly discusses paper, glass, aluminum and ways to make packaging greener.
Unit II smart materials and eco-friendly materials by BeST
Smart materials are materials that respond to environmental stimuli like temperature, moisture, pH or electric and magnetic fields. They have properties like self-detection, self-diagnosis, self-correction, and self-healing. A smart system has components like data acquisition sensors, data transmission, a command and control unit like a brain, data instructions to transmit decisions, and action devices like muscles. Smart materials can be classified as piezoelectric, electrostrictive, magnetostrictive, shape memory alloys, and optical fibers. Eco-friendly materials cause minimum damage to the environment from raw materials to the final product, require minimum energy to manufacture, and are recyclable and reusable using locally available materials.
Modern Methods Of Construction Mmc Presentation
The document discusses modern methods of construction (MMC) and volumetric modular construction. It provides information on the drivers of MMC, including cost savings and sustainability. It outlines various MMC techniques used by HKR Architects, such as precast concrete, cladding panels, and volumetric modules. Challenges of designing residential volumetric modules are presented, along with case studies and details of two projects in Dublin that utilized modular construction. Key considerations for the design of volumetric modules are noted.
Geotechnical engineering, civil engineering
It may be used for civil as well as geotechnical engineering students. I copied most of the content from the internet.
Thank you.
Building technology in construction intro
This document discusses building technology and construction materials. It covers traditional materials like brick, mortar, timber and concrete as well as modern materials like glass and plastics. It also examines different building types such as houses, warehouses, retail units, and offices. Specific construction methods like timber frame and steel frame buildings are outlined. Concrete frame construction is also detailed, including advantages and disadvantages.
Advanced Building Materials
The document provides an introduction to advanced building materials. It discusses how materials are becoming more intelligent, interactive and responsive. It then classifies advanced building materials into intelligent materials that can sense and respond on their own, and interactive materials that require external commands to function. The document lists several material trends and properties of advanced materials, and outlines the aims and scope of studying these materials for sustainable construction. It provides examples of specific advanced materials like aerogel, lotusan paint and others, describing their composition, characteristics and applications.
Eco Friendly Interior Materials
Presentation by Amanda Saylor, LEED® AP Interior Designer at Hoffman LLC
Presented at Appleton Public Library (WI) on Thu, Mar 12, 6:30 - 7:30 pm
Presentation on eco friendly packaging materials
This document discusses eco-friendly packaging. It begins by defining packaging and its importance to consumers interested in environmentally-friendly options. It then outlines principles of green packaging like reduce, reuse, recycle. The rest of the document discusses types of packaging, materials like bioplastics and recycled paper that can be used, benefits of eco-friendly packaging, and concludes that innovations in sustainable packaging help the environment and meet consumer demands.
MODERN CONSTRUCTION METHODS
The document discusses various modern construction technologies including concrete walls and floors, precast cladding panels, 3D volumetric modules, twin wall technology, flat slabs, thin joint masonry, insulating concrete formwork, and precast concrete foundations. These technologies aim to reduce costs and construction time while improving quality, through the use of prefabricated concrete elements constructed in a controlled factory environment and assembled on site.
Building methods and construction technology 1
This document provides an overview of carpentry and joinery topics including building design principles, substructure and superstructure elements, load distribution, types of concrete foundations, floor construction methods, solid walls, cavity walls, timber framing, structural insulated panels, energy loss considerations, and load and stress. The document is authored by Stephen Jones and intended as a tutor resource on these carpentry and joinery topics.
13 construction material from the future
The document summarizes 13 emerging construction materials, including translucent concrete that uses glass fibers to allow light transmission, sensiTiles with embedded fiber optics that twinkle as people walk on them, and electrified wood that incorporates wiring to power devices. It also discusses flexible honeycomb structures, paper-based countertops, self-repairing cement with microcapsules that seal cracks, strong yet lightweight carbon fiber, and bendable concrete reinforced with fibers.
CCS Gas and Industry Research Activities in Norway, Nils Røkke (Sintef) UK/No...
CCS Gas and Industry Research Activities in Norway, Nils Røkke (Sintef) UK/No...UK Carbon Capture and Storage Research Centre
CCS Gas and Industry Research Activities in Norway, Nils Røkke (Sintef) UK/Norway/Canada Meeting 18/19 March 2015CCS Gas and Industry Research Activities in Norway, Nils Røkke (Sintef) UK/No...
CCS Gas and Industry Research Activities in Norway, Nils Røkke (Sintef) UK/No...UK Carbon Capture and Storage Research Centre
CCS Gas and Industry Research Activities in Norway, Nils Røkke (Sintef) UK/Norway/Canada Meeting 18/19 March 2015More Related Content
Viewers also liked
Business Profile of Indosafe Pratama (2014)
Quality Training, Inspection and Consulting Service Provider
Head Office : Balikpapan
Sentra Eropa I, Balikpapan Baru, Block AA-4 No.30
Balikpapan – East Kalimantan 76114
Telp. (+62 542) 878618, 878619
Fax. (+62 542) 873450
Email: info@indosafepratama.com
Jakarta Office
Nucira Building 1st Floor
Jl. MT Haryono Kav.27, South Jakarta 12820
Telp. (+62 21) 83781381 /82/ 83
Fax. (+62 21) 8294055
Email: jkt.info@indosafepratama.com
Batam Office
Dana Graha Building Suite 522
Jl. Imam Bonjol, Nagoya – Batam 29433
Telp. (+62 778) 433567, 455831
Fax. (+62 778) 433073
Email: btm.info@indosafepratama.com
Surabaya Office
Bumi Mandiri Tower II Suite 810
Jl. Panglima Sudirman No.68, Surabaya 60271
Telp. (+62 31) 5311909
Fax. (+62 31) 5311809
Email: sby.info@indosafepratama.com
Natural Energy Field Services
Learn more about Natural Energy Field Services and what we offer. Among our services you can find construction inspection, quality control, surveying, land/row, and safety
Rubber wood
The document discusses rubber wood finger joint board, an eco-friendly material. Rubber wood comes from rubber trees grown in plantations, making use of trees that have already served as rubber producers. It is considered environmentally friendly as a recycled wood. Rubber wood finger jointing is a technique where cuts are made in two pieces of rubber wood timber and glued together, producing a strong joint and allowing for larger surfaces to be glued. Rubber wood finger joint boards can be used for various applications like table tops, floors, doors, and furniture.
5. civil engineering textile
Geotextiles are permeable textiles used in civil engineering applications to improve the performance of soils. They are made from natural fibers like jute or synthetic polymers like polypropylene and polyester. Geotextiles serve functions like separation, reinforcement, drainage, and filtration. They are used in applications such as roads, erosion control, retaining walls, and drainage systems. The properties and performance of geotextiles depend on factors like material composition, mechanical strength, permeability, and resistance to degradation. Polypropylene is commonly used due to its chemical resistance while polyester has better strength and creep resistance for demanding applications. The suitable fiber depends on the specific geotextile application and requirements.
The science and technology of civil engineering materials young 2
The document discusses the benefits of exercise for mental health. It notes that regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help boost feelings of calmness and happiness.
Bricks lecutre
The document discusses bricks and their use in civil engineering materials. It begins by defining bricks as blocks made from clay that are molded, dried, and burned. It then classifications bricks based on their production method, burning level, intended use, and crushing strength. The document also discusses the historical development of bricks, the ingredients required for good brick clay, and the manufacturing process which includes preparing the clay, molding, drying, and burning the bricks in a kiln.
107 quality control
The document discusses quality control in construction. It outlines that designers, manufacturers, and contractors must ensure minimum quality standards are met. It discusses ISO 9001 and 14000 quality assurance standards. It also describes the roles and responsibilities of quality inspectors, testing staff, and assurance programs in ensuring construction quality.
Civil engineering materials & Construction - Soil explorations
This document provides information about site investigation and ground improvement techniques. It discusses the importance of site investigation, which involves preliminary investigations like reconnaissance and studying maps to understand soil conditions. Methods of site exploration include direct methods like test pits and indirect methods like the standard penetration test. The document also covers ground improvement techniques, noting the importance of determining a soil's safe bearing capacity. It discusses methods to test bearing capacity, like plate loading tests, and techniques to improve poor soils, as governed by relevant Indian Standards.
Top eco friendly construction materials
There are several eco-friendly materials commonly used in construction that help make homes more energy efficient and environmentally friendly. These include recycled steel, which can save up to 75% of the energy used to produce normal steel; wood-plastic composite lumber, which is more durable than treated wood; insulating concrete forms that can reduce energy consumption in buildings by 20%; and low-emissivity windows that help insulate homes and can lower heating and cooling costs by 20%. Using these materials can help homeowners save up to 45% on energy costs and be part of the green building trend.
Eco friendly packaging materials
The document discusses sustainable packaging materials and options. It notes that packaging should be reusable, recyclable, minimize materials used and energy for production. Some eco-friendly materials mentioned include bioplastics, recycled paper, forest wood, palm leaf, corn starch, coconut husk and bamboo. Recycled materials like corrugated cartons, glass, steel and paperboard are highlighted. The benefits of materials like bioplastics, recycled paper, forest wood, palm leaf, corn starch, green wrap and bamboo are outlined. The document also briefly discusses paper, glass, aluminum and ways to make packaging greener.
Unit II smart materials and eco-friendly materials by BeST
Smart materials are materials that respond to environmental stimuli like temperature, moisture, pH or electric and magnetic fields. They have properties like self-detection, self-diagnosis, self-correction, and self-healing. A smart system has components like data acquisition sensors, data transmission, a command and control unit like a brain, data instructions to transmit decisions, and action devices like muscles. Smart materials can be classified as piezoelectric, electrostrictive, magnetostrictive, shape memory alloys, and optical fibers. Eco-friendly materials cause minimum damage to the environment from raw materials to the final product, require minimum energy to manufacture, and are recyclable and reusable using locally available materials.
Modern Methods Of Construction Mmc Presentation
The document discusses modern methods of construction (MMC) and volumetric modular construction. It provides information on the drivers of MMC, including cost savings and sustainability. It outlines various MMC techniques used by HKR Architects, such as precast concrete, cladding panels, and volumetric modules. Challenges of designing residential volumetric modules are presented, along with case studies and details of two projects in Dublin that utilized modular construction. Key considerations for the design of volumetric modules are noted.
Geotechnical engineering, civil engineering
It may be used for civil as well as geotechnical engineering students. I copied most of the content from the internet.
Thank you.
Building technology in construction intro
This document discusses building technology and construction materials. It covers traditional materials like brick, mortar, timber and concrete as well as modern materials like glass and plastics. It also examines different building types such as houses, warehouses, retail units, and offices. Specific construction methods like timber frame and steel frame buildings are outlined. Concrete frame construction is also detailed, including advantages and disadvantages.
Advanced Building Materials
The document provides an introduction to advanced building materials. It discusses how materials are becoming more intelligent, interactive and responsive. It then classifies advanced building materials into intelligent materials that can sense and respond on their own, and interactive materials that require external commands to function. The document lists several material trends and properties of advanced materials, and outlines the aims and scope of studying these materials for sustainable construction. It provides examples of specific advanced materials like aerogel, lotusan paint and others, describing their composition, characteristics and applications.
Eco Friendly Interior Materials
Presentation by Amanda Saylor, LEED® AP Interior Designer at Hoffman LLC
Presented at Appleton Public Library (WI) on Thu, Mar 12, 6:30 - 7:30 pm
Presentation on eco friendly packaging materials
This document discusses eco-friendly packaging. It begins by defining packaging and its importance to consumers interested in environmentally-friendly options. It then outlines principles of green packaging like reduce, reuse, recycle. The rest of the document discusses types of packaging, materials like bioplastics and recycled paper that can be used, benefits of eco-friendly packaging, and concludes that innovations in sustainable packaging help the environment and meet consumer demands.
MODERN CONSTRUCTION METHODS
The document discusses various modern construction technologies including concrete walls and floors, precast cladding panels, 3D volumetric modules, twin wall technology, flat slabs, thin joint masonry, insulating concrete formwork, and precast concrete foundations. These technologies aim to reduce costs and construction time while improving quality, through the use of prefabricated concrete elements constructed in a controlled factory environment and assembled on site.
Building methods and construction technology 1
This document provides an overview of carpentry and joinery topics including building design principles, substructure and superstructure elements, load distribution, types of concrete foundations, floor construction methods, solid walls, cavity walls, timber framing, structural insulated panels, energy loss considerations, and load and stress. The document is authored by Stephen Jones and intended as a tutor resource on these carpentry and joinery topics.
13 construction material from the future
The document summarizes 13 emerging construction materials, including translucent concrete that uses glass fibers to allow light transmission, sensiTiles with embedded fiber optics that twinkle as people walk on them, and electrified wood that incorporates wiring to power devices. It also discusses flexible honeycomb structures, paper-based countertops, self-repairing cement with microcapsules that seal cracks, strong yet lightweight carbon fiber, and bendable concrete reinforced with fibers.
Viewers also liked (20)
The science and technology of civil engineering materials young 2
The science and technology of civil engineering materials young 2
Civil engineering materials & Construction - Soil explorations
Civil engineering materials & Construction - Soil explorations
Unit II smart materials and eco-friendly materials by BeST
Unit II smart materials and eco-friendly materials by BeST
Similar to Institute of mechanics, materials, and civil enginering -UCL- Lab'InSight Biomass to Energy
CCS Gas and Industry Research Activities in Norway, Nils Røkke (Sintef) UK/No...
CCS Gas and Industry Research Activities in Norway, Nils Røkke (Sintef) UK/No...UK Carbon Capture and Storage Research Centre
CCS Gas and Industry Research Activities in Norway, Nils Røkke (Sintef) UK/Norway/Canada Meeting 18/19 March 2015CCS Gas and Industry Research Activities in Norway, Nils Røkke (Sintef) UK/No...
CCS Gas and Industry Research Activities in Norway, Nils Røkke (Sintef) UK/No...UK Carbon Capture and Storage Research Centre
CCS Gas and Industry Research Activities in Norway, Nils Røkke (Sintef) UK/Norway/Canada Meeting 18/19 March 2015CCU et les nouvelles molecules de la transition energetique | 2 fevrier 2021
Webinaire organisé par le pôle Greenwin et le cluster TWEED, lié aux nouvelles technologies émergentes du secteur énergétique, aux derniers développements au niveau du captage, du stockage et de la valorisation du CO2 (CCUS), ainsi qu'au rôle des nouvelles molécules de la transition énergétique.
* Emerging Sustainable Technologies - Elodie Lecadre, Engie Research, Lead Scientific Advisor
* CCU & Molecules - Jan Mertens, Engie Research, Chief Science Officer (En)
* Rationals behind CCUS and Direct Air Capture - Grégoire Leonard, Associate Professor, Department of Chemical Engineering, University of Liège
* CCU & heavy process industries - Jean-Yves Tilquin, Carmeuse, Group R&D Director & Vice-President CO2 Value Europe
4.15 - "Technologies of Biomass Gasification" - Aleksander Sobolewski, Sławom...
This document summarizes technologies for biomass gasification. It provides background on the Institute for Chemical Processing of Coal, which conducts research on gasification. Biomass gasification is described as converting biomass into a gaseous fuel through thermochemical processes. Different types of biomass gasification reactors are presented, along with examples of small and large-scale biomass gasification technologies. Challenges associated with biomass gasification include ensuring a continuous biomass supply and dealing with gas contamination.
MSP PRESENTATION
The document introduces the Microwave Steam Plasma (MSP) gasification technology for treating solid waste. MSP uses an electrode-less microwave plasma torch operating at temperatures over 13,000°F to break down organic materials in solid waste into a gaseous fuel of hydrogen and carbon monoxide. The gaseous fuel or "syngas" can then be used to generate electricity or other end products. MSP offers greater flexibility in feedstocks compared to incineration, higher overall plant efficiency, and eliminates dioxins and furans produced by incineration. The document provides an overview of MSP technology and its advantages over other waste treatment methods.
Syngas routes to alternative fuels - John Bogild Hansen
Presentation given Biomass Gasification Europe 2014 at the Conference of the European Biogas Association 2014.
11. michel crine iets - industrial energy-related technologies and systems
This document summarizes the Industrial Energy-related Technologies and Systems Programme (IETS) and Belgium's participation through the University of Liège (ULg). IETS is an international collaboration established in 2005 to promote energy efficient industrial technologies. It has 10 member countries and 7 ongoing projects called annexes, including Annex X on energy efficient drying technologies led by ULg. The annex involves several countries and has produced 6 technical reports on drying sludge, bark, and biofuels since 2008.
11. michel crine iets - industrial energy-related technologies and systems
This document describes the Industrial Energy-Related Technologies and Systems (IETS) program, a collaboration between countries to promote energy efficient industrial technologies. It was established in 2005 by merging separate initiatives. IETS has 10 member countries and 7 ongoing projects called annexes that focus on areas like drying technologies, biomass refineries, and heat recovery. One annex focuses on energy efficient drying and dewatering. It has produced several reports on technologies like superheated steam drying and hosted conferences to disseminate information.
Defense_APC_20121115_Final
This document summarizes the work of António Pires da Cruz on modeling chemical kinetics and turbulence interactions for internal combustion engine simulations. It discusses emissions from transportation being a global issue and the need for engine CFD modeling. It also covers turbulent combustion modeling, representing chemical kinetics of surrogate fuels, and coupling turbulence and chemical kinetics. Future trends in engine combustion modeling are also addressed.
Apec workshop 2 presentation 5 e apec workshop mexico capture technologies ...
This document summarizes different carbon capture technologies including post-combustion, pre-combustion, and oxy-combustion systems. Post-combustion systems use amine-based solvents to separate CO2 from flue gases, while pre-combustion separates CO2 from syngas before combustion using physical or chemical solvents. Oxy-combustion produces a concentrated CO2 stream by combusting fuels in oxygen instead of air. The document also discusses applying these technologies to industrial sectors like oil refining, cement production, and iron and steel manufacturing.
Apec workshop 2 presentation 5 e apec workshop mexico capture technologies ...
This document summarizes different carbon capture technologies including post-combustion, pre-combustion, and oxy-combustion capture systems. For post-combustion, the most common technology is chemical absorption using amine-based solvents. Pre-combustion capture separates CO2 from syngas before combustion using physical solvents like Selexol. Oxy-combustion produces a concentrated CO2 stream for storage by combusting fuels in oxygen instead of air. The document also discusses applying these technologies to industrial sectors such as oil refining, cement production, and iron and steel manufacturing.
Introductory Presentation Linked In
Elementa Group has a patented steam reformation technology that can sustainably convert municipal solid waste and other carbon-based materials into clean energy. This addresses two major environmental problems by eliminating landfill waste and providing renewable energy. Elementa's process uses indirect heat and proper chemistry to break down waste without incineration in a closed-loop system. It has a small environmental footprint and can produce steady, reliable power from the waste. Elementa's technology has been demonstrated in a pilot plant in Sault Ste. Marie, Ontario, and it addresses concerns around air emissions. The company is led by an experienced team pursuing global project opportunities.
Preparation and performance analysis of Ni/Dolomite Catalyst
The document discusses the preparation and testing of a Ni/Dolomite catalyst for cracking tar produced during biomass gasification. The catalyst is prepared by adding nickel nitrate, dolomite, silicate cement, and graphite binders, then dried and calcined. Testing shows the catalyst can crack 94% of tar in the first hour but its activity decreases over time due to coking. Regenerating the catalyst at 700°C can restore its activity. The results suggest Ni/Dolomite is an effective and inexpensive catalyst that improves the hydrogen content of the produced gas during biomass gasification.
e Refinery: Towards sustainable production of chemicals and fuels
The document discusses the e-Refinery project which aims to accelerate the transition towards sustainable production of chemicals and fuels. The e-Refinery envisions using renewable electricity and CO2/N2 from air as feedstocks converted through direct electrochemical and indirect thermochemical and biotechnological routes. This would help meet targets for reducing CO2 emissions in the Netherlands and EU. The e-Refinery takes a multidisciplinary approach and works with industrial partners to develop technologies like high current density electrolyzers and CO2 capture from air. Its goals are to provide knowledge and an open innovation hub to realize a disruptive change to sustainable electricity-based systems.
Milena Gasification - Bram van der Drift
Presentation given Biomass Gasification Europe 2014 at the Conference of the European Biogas Association 2014.
Reduction of CO2 emissions_Global refineries
This document is a report from a student group at the Eastern Macedonia and Thrace Institute of Technology on refinery operations, products, and pollution problems. It discusses refinery complexity and products like transportation fuels. It also outlines pollution issues like CO2 emissions and proposes options to reduce emissions like carbon capture and storage, energy efficiency through heat integration and combined heat and power, and innovative CO2 conversion technologies. The group recommends improving existing plants, investing in research to transform CO2 into a raw material, and combining carbon capture storage with CO2 conversion to fuels.
Water use of thermal power plants equipped with CO2 capture systems
The potential for increased water use has often been noted as a challenge to the widespread deployment of carbon capture and storage (CCS) to mitigate greenhouse gas emissions. Early studies, that are widely referenced and cited in discussions of CCS, indicated that installation of a capture system would nearly double water consumption for thermal power generation, while more recent studies show different results. The Global CCS Institute has conducted a comprehensive review of data available in order to clarify messages around water consumption associated with installation of a capture system. Changes in water use estimates over time have been evaluated in terms of capture technology, cooling systems, and how the data are reported.
Guido Magneschi, Institute’s Senior Advisor – Carbon Capture, and co-author of the study, presented the results of the review and illustrated the main conclusions.
Advanced materials in CCS
This document discusses advanced materials for carbon capture and storage (CCS) technologies. It provides an overview of Centro Sviluppo Materiali (CSM), an Italian company that develops advanced materials for the energy sector, including structural materials for power plants and functional materials for carbon capture. It then summarizes CSM's research activities in materials for CCS, including efforts to develop new materials that improve the efficiency and reduce the costs of carbon capture technologies.
Low-grade fuel to high-quality energy by gasification
Talk held at the International Conference on Thermochemical Conversion Science in 2013. It covers past and current development activities in the field of biomass and waste gasification
Analysis Procedures of Coal
In coal fired power plants coal is a main fuel for combustion purpose. Before use of coal different tests are to be carried out to analysis the constituent elements and some undesirable contamination in the coal. Discuss the analysis procedures of the coal.
The analysis of coal is as follows C=82%, H=6%,O2=4% and remaining is ash. Determine the amount of theoretical air required for complete combustion. If the actual air supplied is 40% in excess and 80% of given carbon is burnt to CO2 and remaining is CO. Conduct the volumetric analysis of dry products of combustion.
Similar to Institute of mechanics, materials, and civil enginering -UCL- Lab'InSight Biomass to Energy (20)
CCS Gas and Industry Research Activities in Norway, Nils Røkke (Sintef) UK/No...
CCS Gas and Industry Research Activities in Norway, Nils Røkke (Sintef) UK/No...
CCS Gas and Industry Research Activities in Norway, Nils Røkke (Sintef) UK/No...
CCS Gas and Industry Research Activities in Norway, Nils Røkke (Sintef) UK/No...
CCU et les nouvelles molecules de la transition energetique | 2 fevrier 2021
CCU et les nouvelles molecules de la transition energetique | 2 fevrier 2021
4.15 - "Technologies of Biomass Gasification" - Aleksander Sobolewski, Sławom...
4.15 - "Technologies of Biomass Gasification" - Aleksander Sobolewski, Sławom...
Syngas routes to alternative fuels - John Bogild Hansen
Syngas routes to alternative fuels - John Bogild Hansen
11. michel crine iets - industrial energy-related technologies and systems
11. michel crine iets - industrial energy-related technologies and systems
11. michel crine iets - industrial energy-related technologies and systems
11. michel crine iets - industrial energy-related technologies and systems
Apec workshop 2 presentation 5 e apec workshop mexico capture technologies ...
Apec workshop 2 presentation 5 e apec workshop mexico capture technologies ...
Apec workshop 2 presentation 5 e apec workshop mexico capture technologies ...
Apec workshop 2 presentation 5 e apec workshop mexico capture technologies ...
Preparation and performance analysis of Ni/Dolomite Catalyst
Preparation and performance analysis of Ni/Dolomite Catalyst
e Refinery: Towards sustainable production of chemicals and fuels
e Refinery: Towards sustainable production of chemicals and fuels
Water use of thermal power plants equipped with CO2 capture systems
Water use of thermal power plants equipped with CO2 capture systems
Low-grade fuel to high-quality energy by gasification
Low-grade fuel to high-quality energy by gasification
More from Réseau LIEU (Liaison Entreprises-Universités)
L'eau dans votre process industriel : Traitements en cours de process
L'eau dans votre process industriel : Traitements en cours de processRéseau LIEU (Liaison Entreprises-Universités)
L'eau dans votre process industriel
Un événement organisé par le Réseau LIEU, le 27 mars 2018 à Gembloux. SYNHERA :
Centre d’études et de
recherches des catégories agronomique, paramédicale et
technique de la HELHaL'eau dans votre process industriel optimisation des traitements primaires et...
L'eau dans votre process industriel optimisation des traitements primaires et...Réseau LIEU (Liaison Entreprises-Universités)
L'eau dans votre process industriel
Un événement organisé par le Réseau LIEU, le 27 mars 2018 à Gembloux.
UCL – ICTEAM : Groupe de recherche en commande des
procédés
UMONS : Départements d’électricité et de chimie/science des
matériaux
ULB : Transferts, interfaces et procédésL'eau dans votre process industriel analyse des risques des rejets
L'eau dans votre process industriel analyse des risques des rejetsRéseau LIEU (Liaison Entreprises-Universités)
L'eau dans votre process industriel
Un événement organisé par le Réseau LIEU, le 27 mars 2018 à Gembloux.
UNamur : LAB OF ENVIRONMENTAL ECOSYSTEM ECOLOGYL'eau dans votre process industriel : performances des traitements tertiaires...
L'eau dans votre process industriel : performances des traitements tertiaires...Réseau LIEU (Liaison Entreprises-Universités)
L'eau dans votre process industriel
Un événement organisé par le Réseau LIEU, le 27 mars 2018 à Gembloux.
Compétences des laboratoires :
- ULB : TRANSFERTS, INTERFACES ET PROCÉDÉS, Frédéric Debaste
- ULg : NANOMATERIALS, CATALYSIS, ELECTROCHEMISTRY - NCEL'eau dans votre process industriel CEBEDEAU
L'eau dans votre process industriel : prenez-en le
contrôle pour réduire vos coûts et gérer les risques !
Contraintes externes réglementaires et opportunité de diagnostic : cas concrets et bonnes pratiques.
Un événement organisé par le Réseau LIEU, le 27 mars à Gembloux
L'eau dans votre process industriel Introduction LIEU - SPADEL
L'eau dans votre process industriel Introduction LIEU - SPADELRéseau LIEU (Liaison Entreprises-Universités)
L’eau dans votre process industriel :
Prenez-en le contrôle pour réduire vos coûts et gérer les risques !
Un événement du Réseau LIEU, organisé à Gembloux le 27 mars 2018Agile Maker Collaboration STIB - UCL LaboRH
Présentation réalisée à l'occasion du Lab'inSight Travailler à l'ère du numérique, 27.05.2016
Agile Maker Collaboration STIB - UCL LaboRH
Présentation réalisée à l'occasion du Lab'InSight du 27.05.2016 "Travailler à l'ère des réseaux"
CRIDS UNamur et PReCOM Université St Louis
Présentation réalisée par Ie Professeur Anne-Sophie Collard & le Docteur Thibault Philippette (CRIDS), le Professeur Geoffroy Patriarche & le Docteur Marie Dufrasne (PReCOM) à l'occasion du Lab'InSight "Travailler ensemble à l'ère des réseaux", du 27.05.2016, à Bruxelles
Ecoles des sciences humaines et sociales UMONS
Présentation réalisée par Ie Professeur David Jamar, à l'occasion du Lab'InSight "Travailler ensemble à l'ère des réseaux", du 27.05.2016, à Bruxelles
ICHEC Recherches
Présentation réalisée par Isabelle Choquet Ph. D. et Jacques Folon Ph. D., à l'occasion du Lab'InSight "Travailler ensemble à l'ère des réseaux", du 27.05.2016, à Bruxelles
LaboRH UCL
Présentation réalisée par le Docteur Céline Donis à l'occasion du Lab'InSight "Travailler ensemble à l'ère des réseaux", du 27.05.2016, à Bruxelles
LENTIC HEC-ULg
Présentation réalisée par Marine Franssen et Giseline Rondeaux à l'occasion du Lab'InSight "Travailler ensemble à l'ère des réseaux", du 27.05.2016, à Bruxelles
PsyTC ULB - Travailler à l'ère des réseaux sociaux
Présentation réalisée par le Professeur Sabin Pohl à l'occasion du Lab'InSight "Travailler ensemble à l'ère des réseaux", du 27.05.2016, à Bruxelles
Sonaca : La collaboration Universités-Entreprises
Présentation de Donatienne Ghysselinckx Ir, réalisée dans le cadre du Lab'InSight Innovative and Substainable Coatings, le 12.05.2016 à l'UMONS
Laboratoire MMS ULg
Présentation du Professeur Jacqueline Lecomte-Beckers, réalisée dans le cadre du Lab'InSight Innovative and Substainable Coatings, le 12.05.2016 à l'UMONS
Laboratoire ARCOMAT UCL
Présentation du Docteur Audrey Favache, réalisée dans le cadre du Lab'InSight Innovative and Substainable Coatings, le 12.05.2016 à l'UMONS
Laboratoire 4MAT ULB
Présentation du professeur Marie-Paule Delplancke, réalisée dans le cadre du Lab'InSight Innovative and Substainable Coatings, le 12.05.2016, à l'UMONS
par le Professeur Marjorie Olivier
Institut Matériaux UMONS
Présentation du Professeur Marjorie Olivier réalisée dans le cadre du Lab'InSight Innovative and Substainable Coatings, le 12.05.2016, à l'UMONS
Wagralim - Fermentation dans l'industrie alimentaire
Fermentation dans l'industrie alimentaire : maîtriser le vivant pour optimiser votre production
Par Valérie Cavillot et Ingrid Vandersmissen
More from Réseau LIEU (Liaison Entreprises-Universités) (20)
L'eau dans votre process industriel : Traitements en cours de process
L'eau dans votre process industriel : Traitements en cours de process
L'eau dans votre process industriel optimisation des traitements primaires et...
L'eau dans votre process industriel optimisation des traitements primaires et...
L'eau dans votre process industriel analyse des risques des rejets
L'eau dans votre process industriel analyse des risques des rejets
L'eau dans votre process industriel : performances des traitements tertiaires...
L'eau dans votre process industriel : performances des traitements tertiaires...
L'eau dans votre process industriel Introduction LIEU - SPADEL
L'eau dans votre process industriel Introduction LIEU - SPADEL
PsyTC ULB - Travailler à l'ère des réseaux sociaux
PsyTC ULB - Travailler à l'ère des réseaux sociaux
Wagralim - Fermentation dans l'industrie alimentaire
Wagralim - Fermentation dans l'industrie alimentaire
Recently uploaded
Introduction of Cybersecurity with OSS at Code Europe 2024
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
Leveraging the Graph for Clinical Trials and Standards
Katja Glaß
OpenStudyBuilder Community Manager - Katja Glaß Consulting
Marius Conjeaud
Principal Consultant - Neo4j
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/temporal-event-neural-networks-a-more-efficient-alternative-to-the-transformer-a-presentation-from-brainchip/
Chris Jones, Director of Product Management at BrainChip , presents the “Temporal Event Neural Networks: A More Efficient Alternative to the Transformer” tutorial at the May 2024 Embedded Vision Summit.
The expansion of AI services necessitates enhanced computational capabilities on edge devices. Temporal Event Neural Networks (TENNs), developed by BrainChip, represent a novel and highly efficient state-space network. TENNs demonstrate exceptional proficiency in handling multi-dimensional streaming data, facilitating advancements in object detection, action recognition, speech enhancement and language model/sequence generation. Through the utilization of polynomial-based continuous convolutions, TENNs streamline models, expedite training processes and significantly diminish memory requirements, achieving notable reductions of up to 50x in parameters and 5,000x in energy consumption compared to prevailing methodologies like transformers.
Integration with BrainChip’s Akida neuromorphic hardware IP further enhances TENNs’ capabilities, enabling the realization of highly capable, portable and passively cooled edge devices. This presentation delves into the technical innovations underlying TENNs, presents real-world benchmarks, and elucidates how this cutting-edge approach is positioned to revolutionize edge AI across diverse applications.Digital Banking in the Cloud: How Citizens Bank Unlocked Their Mainframe
Inconsistent user experience and siloed data, high costs, and changing customer expectations – Citizens Bank was experiencing these challenges while it was attempting to deliver a superior digital banking experience for its clients. Its core banking applications run on the mainframe and Citizens was using legacy utilities to get the critical mainframe data to feed customer-facing channels, like call centers, web, and mobile. Ultimately, this led to higher operating costs (MIPS), delayed response times, and longer time to market.
Ever-changing customer expectations demand more modern digital experiences, and the bank needed to find a solution that could provide real-time data to its customer channels with low latency and operating costs. Join this session to learn how Citizens is leveraging Precisely to replicate mainframe data to its customer channels and deliver on their “modern digital bank” experiences.
What is an RPA CoE? Session 1 – CoE Vision
In the first session, we will review the organization's vision and how this has an impact on the COE Structure.
Topics covered:
• The role of a steering committee
• How do the organization’s priorities determine CoE Structure?
Speaker:
Chris Bolin, Senior Intelligent Automation Architect Anika Systems
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Principle of conventional tomography-Bibash Shahi ppt..pptx
before the computed tomography, it had been widely used.
“How Axelera AI Uses Digital Compute-in-memory to Deliver Fast and Energy-eff...
“How Axelera AI Uses Digital Compute-in-memory to Deliver Fast and Energy-eff...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/how-axelera-ai-uses-digital-compute-in-memory-to-deliver-fast-and-energy-efficient-computer-vision-a-presentation-from-axelera-ai/
Bram Verhoef, Head of Machine Learning at Axelera AI, presents the “How Axelera AI Uses Digital Compute-in-memory to Deliver Fast and Energy-efficient Computer Vision” tutorial at the May 2024 Embedded Vision Summit.
As artificial intelligence inference transitions from cloud environments to edge locations, computer vision applications achieve heightened responsiveness, reliability and privacy. This migration, however, introduces the challenge of operating within the stringent confines of resource constraints typical at the edge, including small form factors, low energy budgets and diminished memory and computational capacities. Axelera AI addresses these challenges through an innovative approach of performing digital computations within memory itself. This technique facilitates the realization of high-performance, energy-efficient and cost-effective computer vision capabilities at the thin and thick edge, extending the frontier of what is achievable with current technologies.
In this presentation, Verhoef unveils his company’s pioneering chip technology and demonstrates its capacity to deliver exceptional frames-per-second performance across a range of standard computer vision networks typical of applications in security, surveillance and the industrial sector. This shows that advanced computer vision can be accessible and efficient, even at the very edge of our technological ecosystem.Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
Northern Engraving | Nameplate Manufacturing Process - 2024
Manufacturing custom quality metal nameplates and badges involves several standard operations. Processes include sheet prep, lithography, screening, coating, punch press and inspection. All decoration is completed in the flat sheet with adhesive and tooling operations following. The possibilities for creating unique durable nameplates are endless. How will you create your brand identity? We can help!
The Microsoft 365 Migration Tutorial For Beginner.pptx
This presentation will help you understand the power of Microsoft 365. However, we have mentioned every productivity app included in Office 365. Additionally, we have suggested the migration situation related to Office 365 and how we can help you.
You can also read: https://www.systoolsgroup.com/updates/office-365-tenant-to-tenant-migration-step-by-step-complete-guide/
AppSec PNW: Android and iOS Application Security with MobSF
Mobile Security Framework - MobSF is a free and open source automated mobile application security testing environment designed to help security engineers, researchers, developers, and penetration testers to identify security vulnerabilities, malicious behaviours and privacy concerns in mobile applications using static and dynamic analysis. It supports all the popular mobile application binaries and source code formats built for Android and iOS devices. In addition to automated security assessment, it also offers an interactive testing environment to build and execute scenario based test/fuzz cases against the application.
This talk covers:
Using MobSF for static analysis of mobile applications.
Interactive dynamic security assessment of Android and iOS applications.
Solving Mobile app CTF challenges.
Reverse engineering and runtime analysis of Mobile malware.
How to shift left and integrate MobSF/mobsfscan SAST and DAST in your build pipeline.
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Simplify your search for a reliable Python development partner! This list presents the top 10 trusted US providers offering comprehensive Python development services, ensuring your project's success from conception to completion.
"Choosing proper type of scaling", Olena Syrota
Imagine an IoT processing system that is already quite mature and production-ready and for which client coverage is growing and scaling and performance aspects are life and death questions. The system has Redis, MongoDB, and stream processing based on ksqldb. In this talk, firstly, we will analyze scaling approaches and then select the proper ones for our system.
Mutation Testing for Task-Oriented Chatbots
Conversational agents, or chatbots, are increasingly used to access all sorts of services using natural language. While open-domain chatbots - like ChatGPT - can converse on any topic, task-oriented chatbots - the focus of this paper - are designed for specific tasks, like booking a flight, obtaining customer support, or setting an appointment. Like any other software, task-oriented chatbots need to be properly tested, usually by defining and executing test scenarios (i.e., sequences of user-chatbot interactions). However, there is currently a lack of methods to quantify the completeness and strength of such test scenarios, which can lead to low-quality tests, and hence to buggy chatbots.
To fill this gap, we propose adapting mutation testing (MuT) for task-oriented chatbots. To this end, we introduce a set of mutation operators that emulate faults in chatbot designs, an architecture that enables MuT on chatbots built using heterogeneous technologies, and a practical realisation as an Eclipse plugin. Moreover, we evaluate the applicability, effectiveness and efficiency of our approach on open-source chatbots, with promising results.
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
A Mix Chart displays historical data of numbers in a graphical or tabular form. The Kalyan Rajdhani Mix Chart specifically shows the results of a sequence of numbers over different periods.
Recently uploaded (20)
Introduction of Cybersecurity with OSS at Code Europe 2024
Introduction of Cybersecurity with OSS at Code Europe 2024
Leveraging the Graph for Clinical Trials and Standards
Leveraging the Graph for Clinical Trials and Standards
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...
Digital Banking in the Cloud: How Citizens Bank Unlocked Their Mainframe
Digital Banking in the Cloud: How Citizens Bank Unlocked Their Mainframe
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
Principle of conventional tomography-Bibash Shahi ppt..pptx
Principle of conventional tomography-Bibash Shahi ppt..pptx
“How Axelera AI Uses Digital Compute-in-memory to Deliver Fast and Energy-eff...
“How Axelera AI Uses Digital Compute-in-memory to Deliver Fast and Energy-eff...
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Northern Engraving | Nameplate Manufacturing Process - 2024
Northern Engraving | Nameplate Manufacturing Process - 2024
The Microsoft 365 Migration Tutorial For Beginner.pptx
The Microsoft 365 Migration Tutorial For Beginner.pptx
AppSec PNW: Android and iOS Application Security with MobSF
AppSec PNW: Android and iOS Application Security with MobSF
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
Institute of mechanics, materials, and civil enginering -UCL- Lab'InSight Biomass to Energy
- 1. 1 iMMC/TFL Institute of Mechanics, Materials, and Civil Engineering UCL, Louvain-la-Neuve Prof. Hervé Jeanmart Lab’InSight « Biomass to Energy » - CTA, December 11th 2012»
- 2. Fields of Expertise Thermochemical conversion of biomass - Pyrolysis (low and high temperatures) - Gasification (wood, residues, and waste) -Combustion (small and large furnaces) Industrial application fields Renewable electricity production Combined heat and power Waste valorization Fuels production 2 FIELDS OF EXPERTISE AND INDUSTRIAL TARGETS Strée – December 11th 2012
- 3. In our lab 0 5 10 15 20 25 30 15:00:00 16:00:00 17:00:00 Time Gascomposition[%vol] 0.00 1000.00 2000.00 3000.00 4000.00 5000.00 6000.00 7000.00 LHV[kJ/Nm3] CH4 CO CO2 H2 PCI Coll. : Xylowatt Gasification of wood : syngas composition and LHV Strée – December 11th 2012
- 4. 4 In our lab Strée – December 11th 2012 Ash deposition tests Coll. : GDF-Suez
- 5. 5 In other labs Strée – Decemebr 11th 2012 Coll: Stûv Designed and build by UCL, installed at Stûv
- 6. 6 In the computer: the SPY model Validations with CEA experiments Coll. : CEA Validation of the Single particle PYrolysis model Strée – December 11th 2012
- 7. Biomass combustion : apparent kinetics Coll: GDF-SUEZ Recom (D) Strée – December 11th 2012 7
- 8. Biomass combustion : complete CFD model Température Température Coll: Stûv Temperature field in a stove at peak pyrolysis conditions 8 Strée – December 11th 2012
- 9. 9 LABORATORY CONTACT INFORMATION Prof. Hervé Jeanmart Herve.jeanmart@uclouvain.be - Phone : +32 10 47 22 09 (sec. : +32 (0)10/47.22.00) UCL, Louvain-La-Neuve/iMMC Institute of Mechanics, Materials, and Civil engineering Place du Levant, 2 1348 Louvain-la-Neuve www.uclouvain.be/immc/ Strée – December 11th 2012