Window film is a way to make your Denver home more energy efficient in 2019 and save you a fair amount of money on utilities for years to come! Read more here:https://www.scottishwindowtinting.com/denver-window-film/window-film-energy-efficiency/
Multidisciplinary Journal Supported by TETFund. The journals would publish papers covering a wide range of subjects in journal science, management science, educational, agricultural, architectural, accounting and finance, business administration, entrepreneurship, business education, all journals
Comparative Study on Day Lighting & Energy Modeling For Conventional and Gree...inventionjournals
A green building is a building which consumes less energy, less water and it includes proper waste management system in such a way that it utilizes maximum natural resources without .affecting the future needs. The energy consumption in a conventional building varies based on the person’s metabolic condition, the circulation of fresh air and the intensity of light entering to the building. The absence of fresh air circulation and lack of natural light will lead to intense power consumption in the building. The methodology used here is basically on the working of the three software viz., velux, design builder, and equest. The velux software is used to understand the building day light factor, how the ventilations are provided and to what extent the building is consuming the natural light through these ventilations. A simulation shall be drawn to check colors the lux values inside the building and it shall be done on the basis d considering different colors and designing the building as per latitude and longitude of the building so the results are based on the weather and climatic conditions of the building topography, thermal comfort in the building, metabolic conditions and materials used . Equest software is the software used for the final analysis of the modeled energy building to determine the consumption of the energy and also the annual savings based on the model prepared in the software. The main area is on how to reduce the energy consumption in the building using the natural day light. A study on the modeled building by its appropriate orientation and a cost wise comparison between green and a conventional building are done here. The study is conducted in one of the site located at Mangalore island site for conventional building.
Sustainability through Intelligence in BuildingsIJERA Editor
Energy efficiency and energy preservation are two primary worldwide concerns in current reality. Thus, sustainability encompasses those two issues, giving that as a general term refers to the capacity to endure. In architecture sustainability describes environmentally conscious design techniques, minimizing negative environmental impact and enhancing efficiency in the use of materials, energy and space. In every level of design and construction of a building, environmental issues should be taken into account. Each specific decision and choice may have consequences for the environment. Sustainability through the proper and sound use of materials is an obvious practice. Beyond that, intelligence integrated in buildings can promote energy efficiency and wider life cycle. After a brief clarification of what intelligence in buildings entitles, a series of case studies are presented in order to support the fact that in deed energy efficiency and energy preservation (in some cases energy production as well) are achieved through the use of intelligent systems in structures.
Impact of Building Envelope Modification on Energy Performance of High-Rise A...drboon
In residential buildings, providing comfortable living environment for building occupants is a major challenge for architects, engineers and those who involved in the building industry. It is reported that considerable energy is consumed to provide and maintain acceptable indoor conditions for thermal comfort in residential buildings in hot-humid climate. The observable increase in energy consumption is chiefly resulting from the growing use of air conditioning system. There are various energy conservation measures which can be applied to reduce energy consumption and among these measures are passive envelope design measures. This paper addresses the energy performance of selected high-rise apartments in Kuala Lumpur. Energy Plus software is utilized in measuring the performance because of its availability, validity and accuracy. Possible energy savings due to passive envelope design measures integration are investigated. This includes investigating the effect of thermal insulation and glazing type on potential energy savings.
A Literature Review Outlining the Importance of Blinds and Shutters as a Sus...Zoe De Grussa
De Grussa, Z and Andrews, D and Newton, E and Lowry, G and Chalk, A and Bush, D (2016) A Literature Review Outlining the Importance of Blinds and Shutters as a Sustainable Asset that has the Potential to enhance the Productivity of Occupants in the UK. In: Going North for Sustainability Doctoral Workshop ARCOM / CHOBE, 30 June 2016, London South Bank University, London.
Multidisciplinary Journal Supported by TETFund. The journals would publish papers covering a wide range of subjects in journal science, management science, educational, agricultural, architectural, accounting and finance, business administration, entrepreneurship, business education, all journals
Comparative Study on Day Lighting & Energy Modeling For Conventional and Gree...inventionjournals
A green building is a building which consumes less energy, less water and it includes proper waste management system in such a way that it utilizes maximum natural resources without .affecting the future needs. The energy consumption in a conventional building varies based on the person’s metabolic condition, the circulation of fresh air and the intensity of light entering to the building. The absence of fresh air circulation and lack of natural light will lead to intense power consumption in the building. The methodology used here is basically on the working of the three software viz., velux, design builder, and equest. The velux software is used to understand the building day light factor, how the ventilations are provided and to what extent the building is consuming the natural light through these ventilations. A simulation shall be drawn to check colors the lux values inside the building and it shall be done on the basis d considering different colors and designing the building as per latitude and longitude of the building so the results are based on the weather and climatic conditions of the building topography, thermal comfort in the building, metabolic conditions and materials used . Equest software is the software used for the final analysis of the modeled energy building to determine the consumption of the energy and also the annual savings based on the model prepared in the software. The main area is on how to reduce the energy consumption in the building using the natural day light. A study on the modeled building by its appropriate orientation and a cost wise comparison between green and a conventional building are done here. The study is conducted in one of the site located at Mangalore island site for conventional building.
Sustainability through Intelligence in BuildingsIJERA Editor
Energy efficiency and energy preservation are two primary worldwide concerns in current reality. Thus, sustainability encompasses those two issues, giving that as a general term refers to the capacity to endure. In architecture sustainability describes environmentally conscious design techniques, minimizing negative environmental impact and enhancing efficiency in the use of materials, energy and space. In every level of design and construction of a building, environmental issues should be taken into account. Each specific decision and choice may have consequences for the environment. Sustainability through the proper and sound use of materials is an obvious practice. Beyond that, intelligence integrated in buildings can promote energy efficiency and wider life cycle. After a brief clarification of what intelligence in buildings entitles, a series of case studies are presented in order to support the fact that in deed energy efficiency and energy preservation (in some cases energy production as well) are achieved through the use of intelligent systems in structures.
Impact of Building Envelope Modification on Energy Performance of High-Rise A...drboon
In residential buildings, providing comfortable living environment for building occupants is a major challenge for architects, engineers and those who involved in the building industry. It is reported that considerable energy is consumed to provide and maintain acceptable indoor conditions for thermal comfort in residential buildings in hot-humid climate. The observable increase in energy consumption is chiefly resulting from the growing use of air conditioning system. There are various energy conservation measures which can be applied to reduce energy consumption and among these measures are passive envelope design measures. This paper addresses the energy performance of selected high-rise apartments in Kuala Lumpur. Energy Plus software is utilized in measuring the performance because of its availability, validity and accuracy. Possible energy savings due to passive envelope design measures integration are investigated. This includes investigating the effect of thermal insulation and glazing type on potential energy savings.
A Literature Review Outlining the Importance of Blinds and Shutters as a Sus...Zoe De Grussa
De Grussa, Z and Andrews, D and Newton, E and Lowry, G and Chalk, A and Bush, D (2016) A Literature Review Outlining the Importance of Blinds and Shutters as a Sustainable Asset that has the Potential to enhance the Productivity of Occupants in the UK. In: Going North for Sustainability Doctoral Workshop ARCOM / CHOBE, 30 June 2016, London South Bank University, London.
International Journal of Engineering and Science Invention (IJESI)inventionjournals
International Journal of Engineering and Science Invention (IJESI) is an international journal intended for professionals and researchers in all fields of computer science and electronics. IJESI publishes research articles and reviews within the whole field Engineering Science and Technology, new teaching methods, assessment, validation and the impact of new technologies and it will continue to provide information on the latest trends and developments in this ever-expanding subject. The publications of papers are selected through double peer reviewed to ensure originality, relevance, and readability. The articles published in our journal can be accessed online.
A comparative study on sustainable building construction with conventional re...VISHNU VIJAYAN
Vishnu Vijayan, Geethu Elsa Thomas, Athira Madhu ,A comparative study on sustainable building construction with conventional residential building, International Journal of Current Engineering And Scientific Research, April 2018, Volume 5, Issue 4, p-ISSN: 2393-8374,o-ISSN: 2394-0697; GICID: n/d; DOI: 10.21276/ijcesr
Performance Evaluation of Cost Saving Towards Sustainability in Traditional C...IJRESJOURNAL
Abstract:It is most significant to achieve environment protection in construction industry for which prefabrication construction technique is considered to be most efficient sustainable construction method. The importance of prefabrication is based on the influence of different activities elaborate such a waste management, adaptation of material reuses and recycles. This research paper includes a dynamic design approach to evaluate the cost performance of construction project using prefabrication construction method along with applying the subsequent waste treatment activities to accomplish waste management. The construction cost of duplex villathrough traditional construction has been carried out. The construction cost of the same project has then been calculated by the present prefabricated assembly market prices. After critical comparison between construction costs of traditional and prefabrication methods, a significant cost saving has been noticed. The day by day increasing public awareness about the environmental impacts of construction waste has been resulted in including waste management as a major function of construction project management by some construction organizations. Although, some of methods have been developed for construction waste management it is still of much importance that no research has been done so far in this topic to introduce waste minimization through necessary waste treatment activities. This research paper emphasis on the identification of supreme horizons of prefabrication techniques and methods in construction industry by converging on the aggressive need of suitable training and skills for workplace.
Green Buildings Overview and Analysis of Energy Efficient Buildingpaperpublications3
Abstract: The challenges our planet faces, particularly climate change and sustainable economic development, are global in nature and so require global solutions. The building sector, which consumes as much as 40% of world’s energy, 12% of its water and contributes 40% of its waste sent to landfill, is the major part of this global problem. Reducing energy use in buildings saves resources and money while reducing pollution and CO2 in the atmosphere. It also leverages even greater savings at power plants. For the average 33-percent-efficient coal-fired power plant, saving a unit of electricity in a building saves three units of fuel at the power plant. So to reduce green house gas emission, government promotes new buildings construction and to retrofit existing buildings while satisfying low energy criteria. This means improving energy efficiency of buildings and energy systems, developing sustainable building concepts and promoting renewable energy sources. “Green” or “sustainable” buildings use key resources like energy, water, materials, and land more efficiently than buildings that are just built to code. With more natural light and better air quality, green buildings typically contribute to improved employee and student health, comfort, and productivity. A green building depletes the natural resources to the minimum during its construction and operation. In this paper an over view of green building is discussed.
Sustainability Concepts in the Design of High-Rise buildings: the case of Dia...StroNGER2012
One of the evocative structural design solutions for sustainable tall buildings is embraced by the diagrid (diagonal grid) structural scheme. Diagrid, with a perimeter structural configuration characterized by a narrow grid of diagonal members involved both in gravity and in lateral load resistance, has emerged as a new design trend for tall-shaped complex structures, and is becoming increasingly popular due to aesthetics and structural performance. Since it requires less structural steel than a conventional steel frame, it provides for a more sustainable structure. This study focuses on the structural performance of a steel tall building, using FEM nonlinear analyses. Numerical comparisons between a traditional outrigger system and different diagrid configurations (with three different diagrid inclinations) are presented for a building of 40 stories, with a total height of 160m, and a footprint of 36m x 36m. The sustainability of the building (in terms of structural steel weight saving) is assessed, together with the structural behavior.
Opportunities for Energy Conservation in Residential Buildings of Bhopal: A C...Pratish Rawat
Currently, about 40% of the world's energy consumption is used in buildings. In India, with the improvement of living standards and the improvement of living standards, the energy consumption of cooling/heating in buildings is also increasing. The document presents a study based on a survey conducted in residential buildings in Bhopal, Madhya Pradesh. This survey was conducted to evaluate the influence of various parameters such as orientation, window/wall ratio, open areas around buildings, window areas exposed to direct solar radiation, planting, shading, natural lighting, energy consumption in summer and winter Wait. The results have been analyzed for thermal comfort conditions. Controlling this direct sunlight gain can be used as a measure to increase energy savings and thermal comfort. The method of controlling direct solar gain has been discussed in this document. Describes energy-saving opportunities and makes recommendations. From the perspective of optimally designing new residential buildings, this research is useful and can also reduce the energy consumption of existing buildings through some simple measures.
Influence of Glazed Façades on Energy Consumption for Air Conditioning of Off...IJERA Editor
The energy performance of buildings is defined by their electrical systems and thermal exchanges through the envelope, mainly by glazing systems. This study evaluates, through computer simulation, the influence of glazing façades in the energy consumption of the air conditioning system of an office building in five Brazilian cities with different climate conditions. A computer model was developed to analyze the influence of windowto-wall ratio, type of glass and façade configuration in the energy need for air conditioning. The results show that the energy performance of the building is highly influenced by the configurations of the façade, mainly by glazed elements. In cold climates, high thermal transmittance of the envelope helps the dissipation of internal heat gains, reducing energy consumption for air conditioning. In this case, the use of insulated glass unit can be unhelpful. Furthermore, the opening area causes energy consumption variation up to 27.5% depending on climate and type of glass. But the use of a high selective glazing system can decrease the energy need for cooling when the window area is increased.
For those in Colorado Springs, installing window film is top of the mind in spring, since the days of excessive cooling bills are right around the corner. Read more: https://www.greenlightwindowfilms.com/window-film-in-colorado-springs/reduced-energy-cost-in-colorado-springs/
r people here in San Antonio, installing window film is top of the mind in spring, since the days of excessive cooling bills are right around the corner. Read more: https://www.customtintsolutions.com/energysavings/reduced-energy-cost-in-san-antonio/
For those in San Antonio, installing window film is top of the mind in spring, since the days of excessive cooling bills are right around the corner. Read more here:https://www.scottishwindowtinting.com/san-antonio-window-film/reduced-energy-cost-in-san-antonio/
The building integrated photovoltaic (BIPV) system have recently drawn interest and have demonstrated high potential to assist building owners supply both thermal and electrical loads. In this paper, the BIPV technology has been reviewed, in terms of its performance, efficiency and power generation capacity. Specifically, the applications of the BIPV in tropical climate regions have been discussed, together with its prospects and challenges. For these schemes to be implemented in a tropical climatic region, the following issues must be considered: 1) Certain studies must be done relating to electrical load demand, predicted PV output, location of the buildings and its integration and constraints associated with roof design; 2) For the highest energy production from solar PV, the solar collectors need to be with the right tilt depending on the location; 3) Design criteria such as safety, efficiency, durability, flexibility and constructive issues need to be considered; 4) The government of such countries must train electricians and carpenters on PV installations; 5) The BIPV roofing must perform same function as normal roofing materials, such as noise protection, water tightness, insulation and climate protection, and 6) As practiced around the world, these countries must establish design standards for the BIPV.
International Journal of Engineering and Science Invention (IJESI)inventionjournals
International Journal of Engineering and Science Invention (IJESI) is an international journal intended for professionals and researchers in all fields of computer science and electronics. IJESI publishes research articles and reviews within the whole field Engineering Science and Technology, new teaching methods, assessment, validation and the impact of new technologies and it will continue to provide information on the latest trends and developments in this ever-expanding subject. The publications of papers are selected through double peer reviewed to ensure originality, relevance, and readability. The articles published in our journal can be accessed online.
A comparative study on sustainable building construction with conventional re...VISHNU VIJAYAN
Vishnu Vijayan, Geethu Elsa Thomas, Athira Madhu ,A comparative study on sustainable building construction with conventional residential building, International Journal of Current Engineering And Scientific Research, April 2018, Volume 5, Issue 4, p-ISSN: 2393-8374,o-ISSN: 2394-0697; GICID: n/d; DOI: 10.21276/ijcesr
Performance Evaluation of Cost Saving Towards Sustainability in Traditional C...IJRESJOURNAL
Abstract:It is most significant to achieve environment protection in construction industry for which prefabrication construction technique is considered to be most efficient sustainable construction method. The importance of prefabrication is based on the influence of different activities elaborate such a waste management, adaptation of material reuses and recycles. This research paper includes a dynamic design approach to evaluate the cost performance of construction project using prefabrication construction method along with applying the subsequent waste treatment activities to accomplish waste management. The construction cost of duplex villathrough traditional construction has been carried out. The construction cost of the same project has then been calculated by the present prefabricated assembly market prices. After critical comparison between construction costs of traditional and prefabrication methods, a significant cost saving has been noticed. The day by day increasing public awareness about the environmental impacts of construction waste has been resulted in including waste management as a major function of construction project management by some construction organizations. Although, some of methods have been developed for construction waste management it is still of much importance that no research has been done so far in this topic to introduce waste minimization through necessary waste treatment activities. This research paper emphasis on the identification of supreme horizons of prefabrication techniques and methods in construction industry by converging on the aggressive need of suitable training and skills for workplace.
Green Buildings Overview and Analysis of Energy Efficient Buildingpaperpublications3
Abstract: The challenges our planet faces, particularly climate change and sustainable economic development, are global in nature and so require global solutions. The building sector, which consumes as much as 40% of world’s energy, 12% of its water and contributes 40% of its waste sent to landfill, is the major part of this global problem. Reducing energy use in buildings saves resources and money while reducing pollution and CO2 in the atmosphere. It also leverages even greater savings at power plants. For the average 33-percent-efficient coal-fired power plant, saving a unit of electricity in a building saves three units of fuel at the power plant. So to reduce green house gas emission, government promotes new buildings construction and to retrofit existing buildings while satisfying low energy criteria. This means improving energy efficiency of buildings and energy systems, developing sustainable building concepts and promoting renewable energy sources. “Green” or “sustainable” buildings use key resources like energy, water, materials, and land more efficiently than buildings that are just built to code. With more natural light and better air quality, green buildings typically contribute to improved employee and student health, comfort, and productivity. A green building depletes the natural resources to the minimum during its construction and operation. In this paper an over view of green building is discussed.
Sustainability Concepts in the Design of High-Rise buildings: the case of Dia...StroNGER2012
One of the evocative structural design solutions for sustainable tall buildings is embraced by the diagrid (diagonal grid) structural scheme. Diagrid, with a perimeter structural configuration characterized by a narrow grid of diagonal members involved both in gravity and in lateral load resistance, has emerged as a new design trend for tall-shaped complex structures, and is becoming increasingly popular due to aesthetics and structural performance. Since it requires less structural steel than a conventional steel frame, it provides for a more sustainable structure. This study focuses on the structural performance of a steel tall building, using FEM nonlinear analyses. Numerical comparisons between a traditional outrigger system and different diagrid configurations (with three different diagrid inclinations) are presented for a building of 40 stories, with a total height of 160m, and a footprint of 36m x 36m. The sustainability of the building (in terms of structural steel weight saving) is assessed, together with the structural behavior.
Opportunities for Energy Conservation in Residential Buildings of Bhopal: A C...Pratish Rawat
Currently, about 40% of the world's energy consumption is used in buildings. In India, with the improvement of living standards and the improvement of living standards, the energy consumption of cooling/heating in buildings is also increasing. The document presents a study based on a survey conducted in residential buildings in Bhopal, Madhya Pradesh. This survey was conducted to evaluate the influence of various parameters such as orientation, window/wall ratio, open areas around buildings, window areas exposed to direct solar radiation, planting, shading, natural lighting, energy consumption in summer and winter Wait. The results have been analyzed for thermal comfort conditions. Controlling this direct sunlight gain can be used as a measure to increase energy savings and thermal comfort. The method of controlling direct solar gain has been discussed in this document. Describes energy-saving opportunities and makes recommendations. From the perspective of optimally designing new residential buildings, this research is useful and can also reduce the energy consumption of existing buildings through some simple measures.
Influence of Glazed Façades on Energy Consumption for Air Conditioning of Off...IJERA Editor
The energy performance of buildings is defined by their electrical systems and thermal exchanges through the envelope, mainly by glazing systems. This study evaluates, through computer simulation, the influence of glazing façades in the energy consumption of the air conditioning system of an office building in five Brazilian cities with different climate conditions. A computer model was developed to analyze the influence of windowto-wall ratio, type of glass and façade configuration in the energy need for air conditioning. The results show that the energy performance of the building is highly influenced by the configurations of the façade, mainly by glazed elements. In cold climates, high thermal transmittance of the envelope helps the dissipation of internal heat gains, reducing energy consumption for air conditioning. In this case, the use of insulated glass unit can be unhelpful. Furthermore, the opening area causes energy consumption variation up to 27.5% depending on climate and type of glass. But the use of a high selective glazing system can decrease the energy need for cooling when the window area is increased.
For those in Colorado Springs, installing window film is top of the mind in spring, since the days of excessive cooling bills are right around the corner. Read more: https://www.greenlightwindowfilms.com/window-film-in-colorado-springs/reduced-energy-cost-in-colorado-springs/
r people here in San Antonio, installing window film is top of the mind in spring, since the days of excessive cooling bills are right around the corner. Read more: https://www.customtintsolutions.com/energysavings/reduced-energy-cost-in-san-antonio/
For those in San Antonio, installing window film is top of the mind in spring, since the days of excessive cooling bills are right around the corner. Read more here:https://www.scottishwindowtinting.com/san-antonio-window-film/reduced-energy-cost-in-san-antonio/
The building integrated photovoltaic (BIPV) system have recently drawn interest and have demonstrated high potential to assist building owners supply both thermal and electrical loads. In this paper, the BIPV technology has been reviewed, in terms of its performance, efficiency and power generation capacity. Specifically, the applications of the BIPV in tropical climate regions have been discussed, together with its prospects and challenges. For these schemes to be implemented in a tropical climatic region, the following issues must be considered: 1) Certain studies must be done relating to electrical load demand, predicted PV output, location of the buildings and its integration and constraints associated with roof design; 2) For the highest energy production from solar PV, the solar collectors need to be with the right tilt depending on the location; 3) Design criteria such as safety, efficiency, durability, flexibility and constructive issues need to be considered; 4) The government of such countries must train electricians and carpenters on PV installations; 5) The BIPV roofing must perform same function as normal roofing materials, such as noise protection, water tightness, insulation and climate protection, and 6) As practiced around the world, these countries must establish design standards for the BIPV.
Green Building Effect in Commercial Building vivatechijri
The key reason behind any environmental strain is the haphazard usage of global natural resources leading to, pollution in the environment, sea level rising, warming the earth, depletion of natural resources etc. The drastic climate variation has been observed worldwide, which in fact is mainly due to the release of CO2 from every energy actions. The building sector consumes nearly 40 % of the total energy and accounts for 30 percent of world greenhouse gas emissions. With all the green features modeled, the project building could achieve 33.76% energy improvement over the baseline building in the present model. The formulated water conservation strategy includes recycled water from sewage, rainwater harvesting, metering and sub metering, and low flow fixtures. The maximum quantity of recycled water generated inside the building is 157.3 KL/month and the total saving of freshwater is 53.85%.
A Life-cycle Cost-benefit Analysis for Rooftop Photovoltaic Systems in Lightw...IEREK Press
There is a widespread consensus that energy efficiency of buildings is an essential component of sustainable developmentand several kinds of renewable energy technologies have been widely used to achieve this sustainable goal. As a rapidly developing country, China’s manufacturing industry still occupies a prominent position, with a large number of industrial buildingsthat are also a crucial part of urban planning. Compared with multi-story and high-rise commercial buildings, large industrial sheds have a much more usable roof area, where rooftop photovoltaic (PV) systems are increasingly used. However, due to the small structural margins of the lightweight steel-structured (LSS) industrial buildings and the large initial investment of the thin-film PV system, few case studies are available for this kind of industrial buildings. In this research, three representative cities in China, with varying levels of solar radiation availability, are selected as typical external design factors. Taking a typical LSS industrial building with an added thin-film rooftop PV system as an example, a life-cycle cost-benefit analysis is conducted from environmental and economic aspects. The results of the analysis demonstrate the effectiveness of the rooftop thin-film PV system as a means to increase the energy efficiency of the LSS industrial buildings.
Nowadays the concept of Net ZEB is well-known
and widespread in the scientific community. The European
Union has set ambitious targets for 2020 and even more
ambitious for 2050. In order to reduce the domestic GHG
emissions by 80-95%, compared to 1990 levels- till 2050, the
building sector has to do its part and to pass through a deep
restructure. Therefore, it is grown the interest in design and
technical solutions for achieving a zero or nearly zero energy
building. This paper investigate several construction technologies
and system of energy production that can be adopted to build an
“enhanced saving” (parsimonious) building, which can strive for
the objective of NetZEB. Moreover the economic analysis of the
feasibility of the NZEB target has been developed.
Climate-responsive (passive) design is key to green buildings design and is based on the way a building moderates the climate for human good and well-being. Solar energy and wind energy can be effectively combined with climate-responsive design to produce electrical power by photovoltaic (PV) and wind turbines (WT). Today, urbanization and the increasingly dense populations of the world’s largest cities are pushing architects to reach for new heights in sustainable building skyscraper designs. But, there are a few green buildings in this world that capture the eye. This presentation provides a preview of Modern “eco-scrapers” that are bridging the gap between breathtaking building design and clean technological ingenuity .
Similar to Impact of window films on the overall energy consumption study (20)
Make working from home more comfortable and enjoyable. Install glare reducing window film for your Denver home today. https://www.scottishwindowtinting.com/window-film/glare-reducing-window-tint/glare-reducing-window-films-denver/
Energy costs are increasing nationwide and many property owners are feeling overburdened by the added expenses. 3M Thinsulate Window Film offers Denver property owners a way to curb heightening costs by reducing energy usage. https://www.scottishwindowtinting.com/window-film/energy-efficiency/denver-3m-thinsulate-window-film/
Window film is a powerful layer of protection against the sun which causes massive fading on hardwood floors and could ruin them completely. Read more here: https://www.scottishwindowtinting.com/residential-window-film/fade-resistant-window-film/
Daylight Redirecting Film is a revolutionary technology that uses the sunlight to make offices more energy efficient and healthier. Learn more here: https://www.scottishwindowtinting.com/denver-window-tinting/how-daylight-redirecting-film-can-help-improve-the-health-and-wellness-of-denver-office-spaces/
Artificial Reefs by Kuddle Life Foundation - May 2024punit537210
Situated in Pondicherry, India, Kuddle Life Foundation is a charitable, non-profit and non-governmental organization (NGO) dedicated to improving the living standards of coastal communities and simultaneously placing a strong emphasis on the protection of marine ecosystems.
One of the key areas we work in is Artificial Reefs. This presentation captures our journey so far and our learnings. We hope you get as excited about marine conservation and artificial reefs as we are.
Please visit our website: https://kuddlelife.org
Our Instagram channel:
@kuddlelifefoundation
Our Linkedin Page:
https://www.linkedin.com/company/kuddlelifefoundation/
and write to us if you have any questions:
info@kuddlelife.org
Willie Nelson Net Worth: A Journey Through Music, Movies, and Business Venturesgreendigital
Willie Nelson is a name that resonates within the world of music and entertainment. Known for his unique voice, and masterful guitar skills. and an extraordinary career spanning several decades. Nelson has become a legend in the country music scene. But, his influence extends far beyond the realm of music. with ventures in acting, writing, activism, and business. This comprehensive article delves into Willie Nelson net worth. exploring the various facets of his career that have contributed to his large fortune.
Follow us on: Pinterest
Introduction
Willie Nelson net worth is a testament to his enduring influence and success in many fields. Born on April 29, 1933, in Abbott, Texas. Nelson's journey from a humble beginning to becoming one of the most iconic figures in American music is nothing short of inspirational. His net worth, which estimated to be around $25 million as of 2024. reflects a career that is as diverse as it is prolific.
Early Life and Musical Beginnings
Humble Origins
Willie Hugh Nelson was born during the Great Depression. a time of significant economic hardship in the United States. Raised by his grandparents. Nelson found solace and inspiration in music from an early age. His grandmother taught him to play the guitar. setting the stage for what would become an illustrious career.
First Steps in Music
Nelson's initial foray into the music industry was fraught with challenges. He moved to Nashville, Tennessee, to pursue his dreams, but success did not come . Working as a songwriter, Nelson penned hits for other artists. which helped him gain a foothold in the competitive music scene. His songwriting skills contributed to his early earnings. laying the foundation for his net worth.
Rise to Stardom
Breakthrough Albums
The 1970s marked a turning point in Willie Nelson's career. His albums "Shotgun Willie" (1973), "Red Headed Stranger" (1975). and "Stardust" (1978) received critical acclaim and commercial success. These albums not only solidified his position in the country music genre. but also introduced his music to a broader audience. The success of these albums played a crucial role in boosting Willie Nelson net worth.
Iconic Songs
Willie Nelson net worth is also attributed to his extensive catalog of hit songs. Tracks like "Blue Eyes Crying in the Rain," "On the Road Again," and "Always on My Mind" have become timeless classics. These songs have not only earned Nelson large royalties but have also ensured his continued relevance in the music industry.
Acting and Film Career
Hollywood Ventures
In addition to his music career, Willie Nelson has also made a mark in Hollywood. His distinctive personality and on-screen presence have landed him roles in several films and television shows. Notable appearances include roles in "The Electric Horseman" (1979), "Honeysuckle Rose" (1980), and "Barbarosa" (1982). These acting gigs have added a significant amount to Willie Nelson net worth.
Television Appearances
Nelson's char
Climate Change All over the World .pptxsairaanwer024
Climate change refers to significant and lasting changes in the average weather patterns over periods ranging from decades to millions of years. It encompasses both global warming driven by human emissions of greenhouse gases and the resulting large-scale shifts in weather patterns. While climate change is a natural phenomenon, human activities, particularly since the Industrial Revolution, have accelerated its pace and intensity
Characterization and the Kinetics of drying at the drying oven and with micro...Open Access Research Paper
The objective of this work is to contribute to valorization de Nephelium lappaceum by the characterization of kinetics of drying of seeds of Nephelium lappaceum. The seeds were dehydrated until a constant mass respectively in a drying oven and a microwawe oven. The temperatures and the powers of drying are respectively: 50, 60 and 70°C and 140, 280 and 420 W. The results show that the curves of drying of seeds of Nephelium lappaceum do not present a phase of constant kinetics. The coefficients of diffusion vary between 2.09.10-8 to 2.98. 10-8m-2/s in the interval of 50°C at 70°C and between 4.83×10-07 at 9.04×10-07 m-8/s for the powers going of 140 W with 420 W the relation between Arrhenius and a value of energy of activation of 16.49 kJ. mol-1 expressed the effect of the temperature on effective diffusivity.
UNDERSTANDING WHAT GREEN WASHING IS!.pdfJulietMogola
Many companies today use green washing to lure the public into thinking they are conserving the environment but in real sense they are doing more harm. There have been such several cases from very big companies here in Kenya and also globally. This ranges from various sectors from manufacturing and goes to consumer products. Educating people on greenwashing will enable people to make better choices based on their analysis and not on what they see on marketing sites.
"Understanding the Carbon Cycle: Processes, Human Impacts, and Strategies for...MMariSelvam4
The carbon cycle is a critical component of Earth's environmental system, governing the movement and transformation of carbon through various reservoirs, including the atmosphere, oceans, soil, and living organisms. This complex cycle involves several key processes such as photosynthesis, respiration, decomposition, and carbon sequestration, each contributing to the regulation of carbon levels on the planet.
Human activities, particularly fossil fuel combustion and deforestation, have significantly altered the natural carbon cycle, leading to increased atmospheric carbon dioxide concentrations and driving climate change. Understanding the intricacies of the carbon cycle is essential for assessing the impacts of these changes and developing effective mitigation strategies.
By studying the carbon cycle, scientists can identify carbon sources and sinks, measure carbon fluxes, and predict future trends. This knowledge is crucial for crafting policies aimed at reducing carbon emissions, enhancing carbon storage, and promoting sustainable practices. The carbon cycle's interplay with climate systems, ecosystems, and human activities underscores its importance in maintaining a stable and healthy planet.
In-depth exploration of the carbon cycle reveals the delicate balance required to sustain life and the urgent need to address anthropogenic influences. Through research, education, and policy, we can work towards restoring equilibrium in the carbon cycle and ensuring a sustainable future for generations to come.
Prevalence of Toxoplasma gondii infection in domestic animals in District Ban...Open Access Research Paper
Toxoplasma gondii is an intracellular zoonotic protozoan parasite, infect both humans and animals population worldwide. It can also cause abortion and inborn disease in humans and livestock population. In the present study total of 313 domestic animals were screened for Toxoplasma gondii infection. Of which 45 cows, 55 buffalos, 68 goats, 60 sheep and 85 shaver chicken were tested. Among these 40 (88.88%) cows were negative and 05 (11.12%) were positive. Similarly 55 (92.72%) buffalos were negative and 04 (07.28%) were positive. In goats 68 (98.52%) were negative and 01 (01.48%) was recorded positive. In sheep and shaver chicken the infection were not recorded.
WRI’s brand new “Food Service Playbook for Promoting Sustainable Food Choices” gives food service operators the very latest strategies for creating dining environments that empower consumers to choose sustainable, plant-rich dishes. This research builds off our first guide for food service, now with industry experience and insights from nearly 350 academic trials.
Impact of window films on the overall energy consumption study
1. sustainability
Article
Impact of Window Films on the Overall Energy
Consumption of Existing UK Hotel Buildings
Ali Bahadori-Jahromi 1,*, Abdulazeez Rotimi 1, Anastasia Mylona 2, Paulina Godfrey 3 and
Darren Cook 3
1 Department of Civil and Environmental Engineering, School of Computing and Engineering,
University of West London, London W5 5RF, UK; Abdulazeez.Rotimi@uwl.ac.uk
2 The Chartered Institution of Building Services Engineers (CIBSE), London SW12 9BS, UK;
AMylona@cibse.org
3 Hilton, Maple Court, Reeds Crescent, Watford WD244QQ, UK; Paulina.Godfrey@hilton.com (P.G.);
Darren.Cook@hilton.com (D.C.)
* Correspondence: ali.jahromi@uwl.ac.uk
Academic Editor: Marc A. Rosen
Received: 20 March 2017; Accepted: 27 April 2017; Published: 2 May 2017
Abstract: Recently, considerable attention has justifiably been directed towards energy savings in
buildings as they account for up to 20–40% of total energy consumption in developed countries. In the
United Kingdom, studies have revealed that buildings’ CO2 emissions for account for at least 43%
of total emissions. Window panels are a major component of the building fabric with considerable
influence on the façade energy performance and are accountable for up to 60% of a building’s overall
energy loss. Therefore, the thermal performance of glazing materials is an important issue within
the built environment. This work evaluates the impact of solar window films on the overall energy
consumption of an existing commercial building via the use of a case study U.K. hotel and TAS
dynamic simulation software. The study results demonstrated that the impact of window films on
the overall energy consumption of the case study hotel is approximately 2%. However, an evaluation
of various overall energy consumption components showed that the window films reduce the annual
total cooling energy consumption by up to 35% along with a marginal 2% increase in the annual total
heating energy consumption. They can also provide overall cost and CO2 emissions savings of up
to 3%.
Keywords: energy consumption; window films; building simulation
1. Introduction
The importance of reducing global energy consumption cannot be overemphasised due to the
finite nature of energy resources and extensive environmental effects such as climate change and global
warming [1,2]. The adverse effects of climate change such as increased risk of flood, superstorms
and drought can result in global mass migration and conflicts [1]. Hence, a drastic reduction in
global CO2 emissions is required, which is achievable by ensuring the use of sustainable cleaner
energy and a reduction in current global energy demand through improved energy efficiency [1].
The contribution of building energy use to energy-linked threats to sustainable development are
varied and can include: deaths associated with indoor and outdoor air pollution, insecurity of energy
resources and climate change [3]. In recent times, considerable attention has justifiably been directed
towards energy savings in buildings (residential and commercial) as they account for up to 20–40% of
total energy consumption in developed countries [4]. In the United Kingdom, studies have revealed
that CO2 emissions for buildings account for at least 43% of total emissions [5]. Many developed
& developing countries have established regulations aimed at the reduction of building energy
Sustainability 2017, 9, 731; doi:10.3390/su9050731 www.mdpi.com/journal/sustainability
2. Sustainability 2017, 9, 731 2 of 23
consumption by significantly improving the energy efficiency of buildings [6]. The quest for improved
energy efficiency and thermal comfort in existing buildings most often involves an all-encompassing
approach, incorporating enhanced cost-effective building fabric retrofitting. Therefore, it has become
crucial that an energy-efficient façade is used, in order to reduce the CO2 emissions throughout the
operational life cycle of a building [7].
Window panels are a major component of the building fabric with considerable influence
on the façade energy performance and preservation required for thermal comfort and the visual
environment [8,9]. They are the most common fenestration style and serve a variety of important
functions in buildings, including: providing occupants with a connection to the external environment,
providing thermal comfort, optimum illumination levels, air ventilation, passive solar gain and a
possible avenue to exit the building in extreme scenarios [10,11]. They are a popular architectural
form and the open scenery through windows in cities with high-rise buildings is a very desirable
feature [11]. However, windows are responsible for a substantial proportion of wasted heat in
heating-dominant climate (up to 60%) [12] and solar heat gain in cooling-dominant climates [4].
The Glass and Glazing Federation [13] highlighted that up to 40% of a building’s load on the cooling
system or air conditioners can be associated with solar gains through the windows. Moreover, air
conditioning use in the United Kingdom has increased considerably in the past two decades and
cooling a building usually requires more energy than heating (Glass and Glazing Federation [13]).
Therefore, the need to reduce the solar transmission through building windows and its adverse
effect on building energy consumption in a cost-effective manner has become increasingly important,
especially considering the increased awareness of global warming.
Window films are generally designed to keep out the sun, thereby reducing the cooling load and
consequently lowering energy consumption and CO2 emissions. Plummer [14] concludes that window
films are commonly polyester products that can be applied on glass, are usually made from several
layers of coated or chemically processed polyester, and may have a lightly metalised layer for improved
solar attributes. Although there are several types of window films, the ones developed to control
solar radiation are most widespread. Some of the benefits of window films include: protection against
the adverse effects of the sun (such as severe heat, fading, glare reduction and ultraviolet radiation);
enhanced security; increased privacy and aesthetic purposes [14]. Furthermore, the application of other
advanced window glazing improvement systems (such as tintable smart windows, solar energy control
and reversible airflow windows) on existing buildings may result in disturbance to the occupants and
does not necessarily provide better performance than window films [8], whereas the application of
window films on glazing has the ability to regulate the penetration of light and heat and also screen
out ultraviolet (UV) light, whilst posing the least disturbance to the building’s occupants [8].
The aim of this paper is to evaluate the impact of two commercially available window films on
the overall energy consumption and performance of an existing U.K. hotel building. Hilton Reading
hotel is used as a case study for this evaluation.
The following objectives helped us to achieve the articulated aim:
• Collection of all necessary data such as architectural plans, building fabric makeup, plants/system
information and operating energy consumption; site survey is also undertaken to verify
collected data.
• Development of hotel model on the dynamic simulation software using the obtained data.
• Estimation of the annual overall energy consumption of the hotel via system modelling of the
dynamic simulation software.
• Improvement of the system modelling result by including estimation of unregulated energy use
(catering energy use). Subsequently, validation of model results and comparison against actual
building operational energy consumption.
• Incorporation of window films into the hotel building model and a comparison to the hotel model
without the window films.
3. Sustainability 2017, 9, 731 3 of 23
This paper presents an approach of evaluating the effect of solar window films on the overall
energy consumption of an existing commercial hotel building. It also contributes to the existing state
of the art, as most studies in this field employ the use of a commercial office case study or prototype
building in a predominantly hot climate.
2. Literature Review
Examination of the existing state of the art shows that there are considerable and varied studies
on the impact of fenestration systems and glazing on the energy consumption and performance of
building envelopes. Some of these works are presented.
The works of Li, et al. [8]; Yousif [15] and Yin, Xu and Shen [16] investigated the potential of solar
window films to reduce the energy consumption of varied types of commercial buildings in three
different climates. The work of Li, et al. [8] employed a methodology that involves an experimental
chamber where actual measurements are taken and subsequently validated with a computer simulation
to examine the impact of different types of solar window films on the energy consumption of various
function rooms in commercial buildings under the relatively warm Hong Kong climate. Their results
indicated that the application of window films to functional rooms of commercial buildings produces
good energy-saving results, with the best performance found in office buildings. Additionally, the
result claimed that window films application on clear glazing performs better than tinted ones. Yin Xu
and Shen [16] used two case study non-domestic buildings in hot summer and cold winter climates,
respectively, to investigate the possible energy savings accruing from the application of window films
via a software building simulation of the whole building with and without solar films. Their outcome
indicated that the performance of window films in glazed curtain wall windows varies and it mainly
influenced by the position of the installed film and the window sizes and arrangement. Their results
also indicated that window films can reduce the shading coefficient and solar heat gain by up to 44%
and 22% if applied on the outside and inside of existing windows. On the other hand, Yousif [15] used
a spectrophotometer to measure key parameters for glazing performance for two case study rooms in
a relatively hot year-round climate. The case study rooms include one with and the other without a
window film to calculate the effect of window films on controlling heat gain. The study’s key finding
indicated that window films reduced the summer cooling load but also resulted in an increased winter
heating load; however, the magnitude of increased heating load was lower.
Detailed information on the theoretical background and calculation of glass heat transfer and
optical performance has also been given by the American Society of Heating Refrigerating and
Air-conditioning Engineers (ASHRAE) [17].
Dussault, et al. [18] and Chen, et al. [19] investigated the use of different energy improvement
technologies to improve the energy consumption of buildings due to the negative effect of windows.
Dussault, et al. [18] examined the energy savings potential of incorporating smart window technologies
on a double-glazed window pane of a typical low thermal mass office building in Quebec, Canada.
Smart windows have controllable absorbing layers, which enables the optical properties of window
panes to alter based on optimal requirements for light and heat flux penetrating the building. Their
study results showed that optimizing the solar heat penetration based on the required heating, cooling
and lighting demands helps to considerably reduce the annual building energy consumption and
maximum cooling loads. On the other hand, Chen et al. [19] investigated the effectiveness of different
external window shading types on reducing the cooling energy consumption of varied commercial
buildings in five different climate zones in China. The study was done with the aid of a building
simulation calibrated prototype model. One of their key findings indicated that for both economical
and energy saving reasons, flexible (opaque) shading is recommended in high rise office and hotel
buildings across varied climate zones.
The works of Carriere, et al. [20], Huang, et al. [11], Yang, et al. [21] and Vanhoutteghem, et al. [22]
investigated the effectiveness of different glazing and window design systems under different climates
with the aid of building simulation software. Huang, et al. [11] examined the efficacy of different
4. Sustainability 2017, 9, 731 4 of 23
energy-efficient building window designs in a cooling-dominant climate. The results of their study
indicated that low-emissivity glazing produces the best performance amongst the investigated design
options; conversely, double-layer glazing gives the worst performance. They also claimed that
energy-efficient designs on the east and west orientations are the most economical in relatively hot
climates. Carriere, et al. [20] studied the efficacy of window glazing in reducing a building’s solar
heat gain using the well-known DOE-2 software. One of their main findings indicated that cooling
energy reduces with the number of glazing; consequently, the overall energy demand of the building
is reduced. However, the effect of important parameters such as wall-to-window ratios or shading
coefficients on solar heat gain in the building was not investigated in that research. Yang, et al. [21]
investigated the optimal window–wall ratio and the adequate glazing type in varied air-conditioning
system operation modes of domestic buildings for individual orientation in a hot summer–cold winter
climate. Their results indicated that the overall energy consumption increased with an increasing
window–wall ratio, especially for east- or west-oriented windows. Additionally, they claimed that
low-emissivity panes have better energy efficiency performance compared to hollow glass. Moreover,
Vanhoutteghem, et al. [22] investigated the link between size, orientation and glazing characteristics of
windows for different side-lit rooms in a ‘nearly zero-energy’ residential building in a heating-dominant
climate. One of their key findings indicated that the best energy savings potential and solar heat gain
utilisation was observed in south-oriented rooms. Additionally, their results suggested that to achieve
a reduction in the room heating load in north- and south-oriented rooms with large window areas, low
U-values are required.
Sorgato, et al. [6] and Wang and Greenberg [9] worked on the effect of window and ventilation
operation on building energy and thermal performance of buildings using computer simulation
software (EnergyPlus). Sorgato, et al. [6] evaluated the effect of window operation on occupancy
thermal comfort and building energy consumption using a simulated reference office building in
three different climate zones of the United States. The result of the work that studied the relationship
between Variable Air Volume (VAV) systems and different ventilation control measures highlighted
that optimal window operation can produce HVAC energy savings of up to 17–47% with mixed mode
ventilation during the summer for various climates. On the other hand, Wang and Greenberg [9]
focused on the impact of occupant behaviour regarding window operation on the HVAC energy
consumption of dwellings in Brazil. Their result highlighted that medium thermal capacity buildings
with proper ventilation control have more potential to provide occupant thermal comfort. Moreover,
adequate building ventilation, accomplished via automated ventilation control coupled with medium
thermal inertia, produced a decrease in HVAC energy consumption.
From the review of the existing body of literature, it is observed that there are varied and
considerable studies on improving the energy performance of windows and façade glazing. However,
most studies are on commercial office buildings and dwellings, with the majority of them using
prototypical or reference rooms as case studies in mainly cooling-dominant climates.
3. Methodology
The goal of this study is to evaluate the impact of window films on the energy consumption of a
case study Hilton hotel building located in the southeast of the United Kingdom. The evaluation is
conducted with the aid of an approved dynamic simulation software.
The process that was employed to achieve the stipulated aim with the case study building can
be categorised into two distinct stages. The first stage involves estimating the energy consumption
of the building by developing a holistic model reflecting the building fabric, systems and thermal
performance of the actual building. The predicted energy consumption is validated by comparing
against actual consumption data. These data are collected by a survey of the case study building to
enable verification of available data such as building fabric data (e.g., walls and windows), occupancy
information to ensure simulation assumptions are realistic, building usage to ensure zone grouping
5. Sustainability 2017, 9, 731 5 of 23
is as shown on architectural plan, and HVAC system characteristics. The second stage entails the
application of the window films into the model to evaluate their impact.
EDSL TAS software version 9.3.3 is employed as the dynamic simulation software to model
and calculate the energy performance for this study. The TAS software, designed by Engineering
Development Solutions Limited (Milton Keynes, UK), is a set of application products with the capability
to simulate the thermal performance of buildings and their systems, which can be translated into
energy consumption estimates [23]. The software is also approved and fully accredited for the 2013
U.K. building regulations and demonstrates compliance with various BS EN ISO standards [24]. It has
a 3D graphic-based geometry input interface (3D Modeller) that includes a CAD link and can also
perform daylighting calculations [23]. The core module is the TAS Building Designer (TBD), which
performs dynamic building simulation with integrated natural and forced air flow [23]. The TAS
system is the component of the software suite that provides plant modelling capabilities to simulate
systems such as Heating Ventilation and Air Conditioning (HVAC) systems/control.
3.1. Building Description
The building used is this case study is the four-storey Hilton Reading hotel with an underground
basement parking located in Reading, Berkshire. It is a predominantly single-skin, glazed facade, sealed
building and fully air conditioned with a total floor area of 12,362 m2. The ground floor of the building
accommodates the reception area, conference/meeting rooms, restaurant, bar, kitchen and fitness/pool
area. The first, second and third floors accommodate en suite bedrooms, and the roof houses the plant
rooms. The building’s construction year (2009) informed the selection of building fabric that complies
with the 2006 U.K. building regulations in the simulation process. The rooftop central Air Handling
Units (AHU) provide heating/cooling as well as fresh air to all building floors, whilst Fan Coil Units
(FCU) provide cooling/heating to individual bedrooms/meeting rooms. The domestic hot water
demand to all rooms, kitchens and toilets is met by six gas fired boilers. Reading, Berkshire is about
40 miles from central London, which is the closest weather station. Therefore, the weather data used
for simulation of heating and non-heating season are the current CIBSE London Test Reference Year
(TRY). To facilitate the shadow calculation and orientation in the 3D Modeller, the latitude, longitude
and time zone values of 51.43 degrees North, −0.98 degrees East and UTC +0.0, respectively, were
inputted to reflect the geographical location parameters of the hotel building.
3.2. Building Modelling Processes
The 3D modeller component of the TAS software allows data on the building geometry and fabric
such as (floors, wall types, windows and doors dimensions, etc.) to be inputted. It also enables the
grouping of the floor areas into different zones based on their usage; all these data are used to generate
a 3D model as close to reality as possible. The data used for the 3D modelling are obtained from the
AUTOCAD drawings of the hotel, which show plans for individual floors. Figure 1 shows a typical
architectural plan of the building.
The TAS TBD component of the software is the core part of the software suite; it performs the
thermal simulation of the building. Appropriate choice of modelling parameters and assumptions is
needed to execute the building performance simulation. The modelling parameters and assumptions
used in this study to execute the building performance simulation are enumerated below.
A. Appropriateness of CIBSE TRY weather data (which are based on historical average data patterns
over a certain number of years) to be applicable to prevailing weather conditions of the case
study building location.
B. Acceptability of the National Calculation Methodology’s standard hotel internal conditions
activity and occupancy as existing conditions of the case study hotel building.
C. Assumption of U-values to be static rather than dynamic, as they normally vary with thermal
and climatic environment.
6. Sustainability 2017, 9, 731 6 of 23
Furthermore, Tables 1 and 2 show the modelling simulation parameters and assumptions based
on the characteristics of the case study building.
Table 1. Modelling and simulation assumptions based on case study building characteristics.
Building Fabric
Calculated area weighted average U-values Wall 0.24 W/m2 K
Floor 0.22 W/m2 K
Roof 0.164 W/m2 K
Windows 2.770 W/m2 K
Doors 1.32 W/m2 K
Average U-values 1.03 W/m2 K
Calendar NCM Standard
Air permeability 5 m3/(h m2) at 50 Pa
Average conductance 10,807 W/K
Alpha values 9.33%
Table 2. Modelling and simulation parameters and assumptions.
Construction Data Base NCM Construction v5.2.tcd
Occupancy levels; people density; lux level
Restaurant 0.2 person/m2, 150 lux
0.0059 person/m2, 100 lux
Car park 0.112 person/m2, 100 lux
0.115 person/m2, 100 lux
Changing room 0.094 person/m2, 100 lux
0.14 person/m2 150 lux
Circulation area 0.108 person/m2, 500 lux
0.183 person/m2, 300 lux
Bedroom 0.106 person/m2, 400 lux
Gym 0.11 person/m2, 200 lux
Food prep/kitchen 0.105 person/m2, 200 lux
Hall 0.11 person/m2, 50 lux
Office 0.14 person/m2, 300 lux
Plant room
0.1188 person/m2, 200 lux
Reception
Store
Swimming pool area
Toilet
Fuel source
Natural gas CO2 factor–0.198 Kg/kWh
Grid electricity CO2 factor–0.4121 Kg/kWh
7. Sustainability 2017, 9, 731 7 of 23
Sustainability 2017, 9, 731 7 of 23
Figure 1. Typical architectural plan of the hotel building.
The TAS systems module of the software suite enables the thermal simulation result file referred to
as (TSD file) to be directly attached to it. The systems module allows for a simulation of the building’s
plants consisting of (heating & cooling circuits, Air Handling Units, and energy sources) along with the
TSD file to produce energy performance results, which include total energy consumption and demand.
However, the estimate does not account for unregulated energy use such as catering, which can be
significant in a hotel building and is therefore estimated in this work to augment the TAS systems result.
Figure 2 presents the TAS systems wizard simulation process.
Figure 2. Plant/systems simulation process.
The two window films simulated in this case study are 3M sun control window films Prestige 70
Exterior and Prestige 40 Exterior. The main distinction between the two films is in their appearance and
the amount light transmission through them. The numbers 70 and 40 in the names of the films are
associated with the visible light transmission. Hence the Prestige 70 Exterior (PR 70 EXT) looks virtually
clear (like the appearance of typical car window glasses), while the Prestige 40 Exterior (PR 40 EXT) has
a warm bronze appearance. The durability of window films depends on varied factors such as climate
and solar exposure; their average life span is over 10 years, with some recorded to last over 20 years [25].
Tables 3 and 4 illustrate the performance attributes of PR 70 EX and PR 40 EXT window films,
respectively, when applied on a typical single-pane clear or tinted window and on a double-pane clear
or tinted window [26].
Figure 1. Typical architectural plan of the hotel building.
The TAS systems module of the software suite enables the thermal simulation result file referred to
as (TSD file) to be directly attached to it. The systems module allows for a simulation of the building’s
plants consisting of (heating & cooling circuits, Air Handling Units, and energy sources) along with the
TSD file to produce energy performance results, which include total energy consumption and demand.
However, the estimate does not account for unregulated energy use such as catering, which can be
significant in a hotel building and is therefore estimated in this work to augment the TAS systems
result. Figure 2 presents the TAS systems wizard simulation process.
Sustainability 2017, 9, 731 7 of 23
Figure 1. Typical architectural plan of the hotel building.
The TAS systems module of the software suite enables the thermal simulation result file referred to
as (TSD file) to be directly attached to it. The systems module allows for a simulation of the building’s
plants consisting of (heating & cooling circuits, Air Handling Units, and energy sources) along with the
TSD file to produce energy performance results, which include total energy consumption and demand.
However, the estimate does not account for unregulated energy use such as catering, which can be
significant in a hotel building and is therefore estimated in this work to augment the TAS systems result.
Figure 2 presents the TAS systems wizard simulation process.
Figure 2. Plant/systems simulation process.
The two window films simulated in this case study are 3M sun control window films Prestige 70
Exterior and Prestige 40 Exterior. The main distinction between the two films is in their appearance and
the amount light transmission through them. The numbers 70 and 40 in the names of the films are
associated with the visible light transmission. Hence the Prestige 70 Exterior (PR 70 EXT) looks virtually
clear (like the appearance of typical car window glasses), while the Prestige 40 Exterior (PR 40 EXT) has
a warm bronze appearance. The durability of window films depends on varied factors such as climate
and solar exposure; their average life span is over 10 years, with some recorded to last over 20 years [25].
Tables 3 and 4 illustrate the performance attributes of PR 70 EX and PR 40 EXT window films,
respectively, when applied on a typical single-pane clear or tinted window and on a double-pane clear
or tinted window [26].
Figure 2. Plant/systems simulation process.
The two window films simulated in this case study are 3M sun control window films Prestige 70
Exterior and Prestige 40 Exterior. The main distinction between the two films is in their appearance
and the amount light transmission through them. The numbers 70 and 40 in the names of the films
are associated with the visible light transmission. Hence the Prestige 70 Exterior (PR 70 EXT) looks
virtually clear (like the appearance of typical car window glasses), while the Prestige 40 Exterior (PR
40 EXT) has a warm bronze appearance. The durability of window films depends on varied factors
such as climate and solar exposure; their average life span is over 10 years, with some recorded to last
over 20 years [25]. Tables 3 and 4 illustrate the performance attributes of PR 70 EX and PR 40 EXT
window films, respectively, when applied on a typical single-pane clear or tinted window and on a
double-pane clear or tinted window [26].
8. Sustainability 2017, 9, 731 8 of 23
Table 3. PR 70 EX typical performance properties.
Glass Type
Visible Light
G Value
(SHGC)
LSG (Light to
Solar Gain)
UV Block (%)
Heat Gain
Reduction (%)
Glare
Reduction (%)
Reflected
(Interior) %
Reflected
(Exterior) %
Transmission
%
Single Pane
Clear 7 7 71 0.48 1.5 99.9 41 20
Tinted 5 6 42 0.39 1.1 99.9 39 20
Double Pane
Clear 14 12 63 0.39 1.6 99.9 45 20
Tinted 13 7 38 0.29 1.3 99.9 43 21
Table 4. PR 40 EX typical performance properties.
Glass Type
Visible Light
G Value
(SHGC)
LSG (Light to
Solar Gain)
UV Block (%)
Heat Gain
Reduction (%)
Glare
Reduction (%)
Reflected
(Interior) %
Reflected
(Exterior) %
Transmission
%
Single Pane
Clear 5 6 42 0.39 1.1 99.9 53 53
Tinted 5 5 25 0.33 0.8 99.9 47 53
Double Pane
Clear 13 7 37 0.29 1.3 99.9 59 53
Tinted 12 6 22 0.23 1.0 99.9 55 53
9. Sustainability 2017, 9, 731 9 of 23
4. Results and Discussion
This section presents the results and discussion for the case study hotel building. Figure 3 shows
the results of the 3D modelling process.
Sustainability 2017, 9, x FOR PEER REVIEW 9 of 23
4. Results and Discussion
This section presents the results and discussion for the case study hotel building. Figure 3 shows the
results of the 3D modelling process.
Figure 3. 3D modelling results.
The TAS TBD component of the software is populated appropriately and simulated to reflect the
characteristics of the building operating without the window films. The simulated TBD file is attached to the
system and plant modelling component of the software to obtain energy performance results for the
building. Typical results include reports of annual energy consumption and monthly energy consumption
simulation of the case study hotel building. The energy consumption estimate comprises heating, cooling,
auxiliary, lighting and equipment energy use.
Figure 4a indicates the annual energy demand and consumption of the building obtained via
plant/system simulation. The figure also shows the breakdown of the energy demand and consumption
results, including heating, cooling, auxiliary, equipment and lighting. Auxiliary energy is the energy used by
controls, pumps, and fans for the HVAC systems. Additionally, there is a standard allowance for small power
heat gains in order to calculate the heating and cooling demands, i.e., the equipment energy use. From Figure
4b,c it can be seen that the total energy consumption predicted via the plant/system modelling is relatively low
compared to the actual building consumption data, with a percentage error of −33% representing an
underestimation. Even though careful selection of building fabric and internal condition parameters was made
to ensure the building simulation replicates the real building operations, this discrepancy is still evident. The
discrepancy is largely due the fact that the estimated energy does not account for some energy use, referred to
as unregulated energy use and covering catering services, which can be significant in a hotel building.
Additionally, deviation due to the local microclimate of the building’s location and the standard weather data
used for building energy simulation can result in a discrepancy between predicted and actual energy
consumption. Nevertheless, it can be observed from Figure 4c that the energy consumption profile of the
systems simulation result across the year does not differ significantly compared to the actual building
measurement, with both profiles showing peak consumption in the heating season and lower consumption
during the cooling season.
Figure 3. 3D modelling results.
The TAS TBD component of the software is populated appropriately and simulated to reflect the
characteristics of the building operating without the window films. The simulated TBD file is attached
to the system and plant modelling component of the software to obtain energy performance results
for the building. Typical results include reports of annual energy consumption and monthly energy
consumption simulation of the case study hotel building. The energy consumption estimate comprises
heating, cooling, auxiliary, lighting and equipment energy use.
Figure 4a indicates the annual energy demand and consumption of the building obtained
via plant/system simulation. The figure also shows the breakdown of the energy demand and
consumption results, including heating, cooling, auxiliary, equipment and lighting. Auxiliary energy is
the energy used by controls, pumps, and fans for the HVAC systems. Additionally, there is a standard
allowance for small power heat gains in order to calculate the heating and cooling demands, i.e., the
equipment energy use. From Figure 4b,c it can be seen that the total energy consumption predicted
via the plant/system modelling is relatively low compared to the actual building consumption data,
with a percentage error of −33% representing an underestimation. Even though careful selection
of building fabric and internal condition parameters was made to ensure the building simulation
replicates the real building operations, this discrepancy is still evident. The discrepancy is largely due
the fact that the estimated energy does not account for some energy use, referred to as unregulated
energy use and covering catering services, which can be significant in a hotel building. Additionally,
deviation due to the local microclimate of the building’s location and the standard weather data
used for building energy simulation can result in a discrepancy between predicted and actual energy
consumption. Nevertheless, it can be observed from Figure 4c that the energy consumption profile
of the systems simulation result across the year does not differ significantly compared to the actual
building measurement, with both profiles showing peak consumption in the heating season and lower
consumption during the cooling season.
10. Sustainability 2017, 9, 731 10 of 23
Sustainability 2017, 9, 731 10 of 23
Figure 4. Showing energy performance results from plant/system simulation.
To improve this result and make the baseline model much more acceptable for the evaluation of
energy improvement measures (window film), energy use for catering services is estimated and used to
augment the result. Since simple, reliable calculation estimates for catering energy use are difficult to come
by, it is recommended in CIBSE TM 54 that benchmarks be used to estimate commercial kitchens’ energy
use. A typical benchmark that can be utilised for this purpose is adopted from CIBSE TM 50: Energy
efficiency in commercial kitchens [27], which comprises catering energy benchmarks for various building
categories per meal served.
For this case study hotel building, the operational energy benchmark (2.54 kWh for fuel and 1.46 kWh
for electricity) for a good practice business/holiday hotel building type was used along with the hotel data
of number of meals served. Figure 5 presents the results for systems simulation plus catering energy
consumption estimate.
Figure 4. Showing energy performance results from plant/system simulation.
To improve this result and make the baseline model much more acceptable for the evaluation of
energy improvement measures (window film), energy use for catering services is estimated and used
to augment the result. Since simple, reliable calculation estimates for catering energy use are difficult to
come by, it is recommended in CIBSE TM 54 that benchmarks be used to estimate commercial kitchens’
energy use. A typical benchmark that can be utilised for this purpose is adopted from CIBSE TM
50: Energy efficiency in commercial kitchens [27], which comprises catering energy benchmarks for
various building categories per meal served.
For this case study hotel building, the operational energy benchmark (2.54 kWh for fuel and
1.46 kWh for electricity) for a good practice business/holiday hotel building type was used along with
the hotel data of number of meals served. Figure 5 presents the results for systems simulation plus
catering energy consumption estimate.
11. Sustainability 2017, 9, 731 11 of 23
Sustainability 2017, 9, 731 11 of 23
Figure 5. Showing system simulation + catering energy use results.
From Figure 5a,b above it can be observed that energy consumption results from the system
simulation, augmented with catering energy use, enhance the energy consumption results and the energy
consumption profile of the model also conforms with that of the actual building energy consumption
profile, especially during heating periods. The deviation observed during cooling-dominant periods can
be attributed to deviation in the weather data. Moreover, it can be observed from Figure 5b that the
comparison of total annual consumption of the TAS systems + catering energy use gives a significantly
improved energy consumption estimate, even though it still underestimates annual energy consumption
by 12%.
The results of the next stage of simulation for this case study, which incorporates the window films
into the model on all external windows irrespective of orientation, are presented in Figures 6–8. Though
the windows of the case study building are double-pane clear windows, the simulation results presented
are for window films applied on both clear and tinted double-glazed windows. This is done to determine
whether there are considerable performance differences for the films applied on the two possible window
variants (clear or tinted). Therefore, the legend on the presented figures represents the following:
Simulation without window films
Simulation with 3M 40 EXT clear: represents simulation result with 3M 40 EXT applied on a clear
window.
Figure 5. Showing system simulation + catering energy use results.
From Figure 5a,b above it can be observed that energy consumption results from the system
simulation, augmented with catering energy use, enhance the energy consumption results and
the energy consumption profile of the model also conforms with that of the actual building
energy consumption profile, especially during heating periods. The deviation observed during
cooling-dominant periods can be attributed to deviation in the weather data. Moreover, it can be
observed from Figure 5b that the comparison of total annual consumption of the TAS systems +
catering energy use gives a significantly improved energy consumption estimate, even though it still
underestimates annual energy consumption by 12%.
The results of the next stage of simulation for this case study, which incorporates the window
films into the model on all external windows irrespective of orientation, are presented in Figures 6–8.
Though the windows of the case study building are double-pane clear windows, the simulation results
presented are for window films applied on both clear and tinted double-glazed windows. This is done
to determine whether there are considerable performance differences for the films applied on the two
possible window variants (clear or tinted). Therefore, the legend on the presented figures represents
the following:
• Simulation without window films
• Simulation with 3M 40 EXT clear: represents simulation result with 3M 40 EXT applied on a
clear window.
12. Sustainability 2017, 9, 731 12 of 23
• Simulation with 3M 40 EXT tint: represents simulation result with 3M 40 EXT applied on a
tinted window.
• Simulation with 3M 70 EXT clear: represents simulation result with 3M 70 EXT applied on a
clear window.
• Simulation with 3M 70 EXT tint: represents simulation result with 3M 70 EXT applied on a
tinted window.
Figure 6 illustrates the overall energy consumption result for the simulation, evaluating the impact
of the window films compared to the baseline model without the window films. As the simulation
result is presented for comparison purposes, the numerical total does not include catering energy
consumption, which is constant for all scenarios. From Figure 6a, it can be observed that the overall
energy savings accruing from the application of the window films across the year is not huge, with
the majority of that savings occurring from May to September, which is the cooling-dominant period.
Furthermore, there is a marginal reduction in energy consumption in January and December during
the peak of the heating season. Figure 6b further illustrates the observed marginal reduction in annual
energy consumption for the simulation. There was a percentage reduction of 1.9% and 1.6% for
window film 3M 40 EXT applied on clear and tinted windows, respectively; and 2.1% and 1.9% for
window film 3M 70 EXT applied on clear and tinted windows, respectively.
Sustainability 2017, 9, 731 12 of 23
Simulation with 3M 40 EXT tint: represents simulation result with 3M 40 EXT applied on a tinted
window.
Simulation with 3M 70 EXT clear: represents simulation result with 3M 70 EXT applied on a clear
window.
Simulation with 3M 70 EXT tint: represents simulation result with 3M 70 EXT applied on a tinted
window.
Figure 6 illustrates the overall energy consumption result for the simulation, evaluating the impact of
the window films compared to the baseline model without the window films. As the simulation result is
presented for comparison purposes, the numerical total does not include catering energy consumption,
which is constant for all scenarios. From Figure 6a, it can be observed that the overall energy savings
accruing from the application of the window films across the year is not huge, with the majority of that
savings occurring from May to September, which is the cooling-dominant period. Furthermore, there is a
marginal reduction in energy consumption in January and December during the peak of the heating
season. Figure 6b further illustrates the observed marginal reduction in annual energy consumption for
the simulation. There was a percentage reduction of 1.9% and 1.6% for window film 3M 40 EXT applied on
clear and tinted windows, respectively; and 2.1% and 1.9% for window film 3M 70 EXT applied on clear
and tinted windows, respectively.
Figure 6. Simulation total energy consumption result.Figure 6. Simulation total energy consumption result.
13. Sustainability 2017, 9, 731 13 of 23
Although the impact of the window film on the overall energy is not significant, it is instructive to
evaluate the impact of the window films on the components of the energy consumption that they have
direct influence on. Therefore, the energy consumption results for heating and cooling are presented in
Figures 7 and 8.
Sustainability 2017, 9, 731 13 of 23
Although the impact of the window film on the overall energy is not significant, it is instructive to
evaluate the impact of the window films on the components of the energy consumption that they have
direct influence on. Therefore, the energy consumption results for heating and cooling are presented in
Figures 7 and 8.
Figure 7. Impact of window films on heating energy consumption.
From Figure 7a, showing the monthly heating energy consumption, it can be seen that there is no
heating energy consumption savings accruing from the application of the window films. This can be
attributed to the fact that the window films mainly reduce the amount of solar heat gain through the
windows, which is required during the heating seasoning to reduce the heating load. Moreover, the figure
illustrates an increase in heating energy consumption, mainly from February to May, with a maximum
increase in April. The maximum percentage increase in heating energy consumption of 9% and 11% was
observed for window film 3M 40 EXT applied on clear and tinted windows, respectively. An increase of 6%
and 9% was observed for window film 3M 70 EXT applied on clear and tinted windows, respectively.
Figure 7. Impact of window films on heating energy consumption.
From Figure 7a, showing the monthly heating energy consumption, it can be seen that there is no
heating energy consumption savings accruing from the application of the window films. This can be
attributed to the fact that the window films mainly reduce the amount of solar heat gain through the
windows, which is required during the heating seasoning to reduce the heating load. Moreover, the
figure illustrates an increase in heating energy consumption, mainly from February to May, with a
maximum increase in April. The maximum percentage increase in heating energy consumption of 9%
and 11% was observed for window film 3M 40 EXT applied on clear and tinted windows, respectively.
An increase of 6% and 9% was observed for window film 3M 70 EXT applied on clear and tinted
windows, respectively.
14. Sustainability 2017, 9, 731 14 of 23
Furthermore, Figure 7b, presenting the annual overall heating energy consumption, shows a
similar trend to that observed in Figure 7a. The figure illustrates that there is a marginal increase in
the overall heating energy consumption across the year of 1.3% and 2% for window film 3M 40 EXT
applied on clear and tinted windows, respectively. Also, an increase in the overall heating energy
consumption of 0.2% and 1.3% was observed for window film 3M 70 EXT applied on clear and tinted
windows, respectively.
Sustainability 2017, 9, 731 14 of 23
Furthermore, Figure 7b, presenting the annual overall heating energy consumption, shows a similar
trend to that observed in Figure 7a. The figure illustrates that there is a marginal increase in the overall
heating energy consumption across the year of 1.3% and 2% for window film 3M 40 EXT applied on clear
and tinted windows, respectively. Also, an increase in the overall heating energy consumption of 0.2% and
1.3% was observed for window film 3M 70 EXT applied on clear and tinted windows, respectively.
Figure 8. Impact of window films on cooling energy consumption.
It can be seen from Figure 8a, illustrating the monthly cooling energy consumption, that the cooling
energy consumption savings accruing from the application of the window films is substantial. This can be
attributed to the fact that the window films mainly reduce the amount of solar heat gain through the
window pane, resulting in a cooling load reduction during the cooling-dominant period. Furthermore, the
figure shows that the bulk of the cooling energy savings is from April to October, with the maximum
Figure 8. Impact of window films on cooling energy consumption.
It can be seen from Figure 8a, illustrating the monthly cooling energy consumption, that the
cooling energy consumption savings accruing from the application of the window films is substantial.
This can be attributed to the fact that the window films mainly reduce the amount of solar heat gain
through the window pane, resulting in a cooling load reduction during the cooling-dominant period.
Furthermore, the figure shows that the bulk of the cooling energy savings is from April to October,
with the maximum energy consumption reduction occurring in July, around the peak of the summer.
15. Sustainability 2017, 9, 731 15 of 23
The maximum percentage cooling energy reduction of 32% and 35% was observed for window film 3M
40 EXT applied on clear and tinted windows, respectively. A reduction of 27% and 32% was observed
for window film 3M 70 EXT applied on clear and tinted windows, respectively.
Figure 8b, showing the annual overall cooling energy consumption, also illustrates a similar
cooling energy saving trend to that observed in Figure 8a. The figure shows that there is a significant
reduction in cooling energy consumption across the year of 32% and 35% for window film 3M 40 EXT
applied on clear and tinted windows, respectively. A reduction in cooling energy consumption of 28%
and 32% was observed for window film 3M 70 EXT applied on clear and tinted windows, respectively.
The critical analysis of the heating and cooling energy consumption demonstrates that there is
a considerable reduction in cooling energy consumption from the application of the window films.
Therefore, to further aid in the choice of appropriate window films, it is instructive to investigate
the impact of the window films on additional parameters such as energy cost and CO2 emissions.
Since the factor and price rate used to evaluate energy costs and CO2 emissions resulting from natural
gas and grid electricity are different, this investigation can demonstrate whether the window films
have a favourable impact on energy costs and CO2 emissions. The CO2 conversion factors of 0.184
for Natural gas and 0.41205 for grid supplied electricity used for this analysis was obtained from the
U.K. Government Conversion Factors for greenhouse gas (GHG) reporting spread sheet [28]. The tariff
rate of £0.059 per kWh for electricity and £0.03 per kWh for natural gas used in the cost analysis was
obtained from the case study building energy supply data.
The results of the impact of the window films on the energy costs and CO2 emissions are presented
in Figures 9–12.
From Figure 9a, illustrating the monthly CO2 emissions results, it can be observed that there is
a reduction in the CO2 emissions due to the application of the window films. The figure shows that
the bulk of the CO2 emissions reduction occurs during the cooling-dominant period because of the
reduction in cooling energy consumption due to the impact of the window films. Moreover, CO2
emissions reduction resulting from cooling demand reduction is worth more in terms of kg as this is
driven by a reduction in electricity consumption. The peak reduction in CO2 emissions was observed
around the peak of the summer in July. The maximum percentage reduction in CO2 emissions was
7% and 1% for window film 3M 40 EXT applied on clear and tinted windows, respectively, while a
maximum percentage reduction of 6% and 7% was observed for window film 3M 70 EXT applied on
clear and tinted windows, respectively.
Additionally, Figure 9b, showing the annual overall CO2 emissions results, also exhibited a
similar trend to that observed in Figure 9a. The figure shows that the percentage overall CO2
emissions reduction across the year is not huge. A total annual CO2 emissions reduction of 3%
and 0% was observed for window film 3M 40 EXT applied on clear and tinted windows, respectively,
and a reduction of 3% was observed for window film 3M 70 EXT applied on both clear and tinted
windows, respectively.
16. Sustainability 2017, 9, 731 16 of 23
Sustainability 2017, 9, 731 16 of 23
Figure 9. Impact of window films on CO2 emissions.
Figures 10–12 presents the results for the cost analysis due to the impact of the window films.
From Figure 10a, it can be observed that there is a small increase in the cost of natural gas, especially
during the heating-dominant period. This can be attributed to the increase in heating energy demand
observed during the heating season. A peak percentage increase in the cost of natural gas of up to 7% and 2%
was observed for window film 3M 40 EXT applied on clear and tinted windows, respectively. A peak
percentage increase of 5% and 7% was observed for window film 3M 70 EXT applied on clear and tinted
windows, respectively. Figure 10b, illustrating the total annual cost for natural gas, demonstrates a similar
trend of increase in natural gas cost. The overall percentage increase was marginal. A percentage increase of
approximately 1% was observed for window film 3M 40 EXT applied on both clear and tinted windows,
respectively, while there was no overall increase in natural gas cost for window film 3M 70 EXT applied on
clear and tinted windows.
Figure 9. Impact of window films on CO2 emissions.
Figures 10–12 presents the results for the cost analysis due to the impact of the window films.
From Figure 10a, it can be observed that there is a small increase in the cost of natural gas,
especially during the heating-dominant period. This can be attributed to the increase in heating energy
demand observed during the heating season. A peak percentage increase in the cost of natural gas
of up to 7% and 2% was observed for window film 3M 40 EXT applied on clear and tinted windows,
respectively. A peak percentage increase of 5% and 7% was observed for window film 3M 70 EXT
applied on clear and tinted windows, respectively. Figure 10b, illustrating the total annual cost for
natural gas, demonstrates a similar trend of increase in natural gas cost. The overall percentage increase
was marginal. A percentage increase of approximately 1% was observed for window film 3M 40 EXT
applied on both clear and tinted windows, respectively, while there was no overall increase in natural
gas cost for window film 3M 70 EXT applied on clear and tinted windows.
17. Sustainability 2017, 9, 731 17 of 23
Sustainability 2017, 9, 731 17 of 23
Figure 10. Impact of window films on natural gas cost.
From Figure 11a, it can be seen that there is a considerable reduction in electricity cost, especially for
window film 3M 40EXT applied on clear windows and for window film 3M 70 EXT applied on both clear and
tinted windows. This reduction is due to the decrease in cooling energy demand and consumption observed
during the cooling summer period because of the impact of the window films. Figure 11b, showing the overall
annual electricity cost, exhibits a similar trend to that observed in Figure 11a. Percentage reductions in the
overall annual electricity cost of 6% and 1% were observed for window film 3M 40 EXT applied on clear and
tinted windows, respectively. A reduction of 5% and 6% in electricity cost was seen for window film 3M 70
EXT applied on clear and tinted windows, respectively.
Figure 10. Impact of window films on natural gas cost.
From Figure 11a, it can be seen that there is a considerable reduction in electricity cost, especially
for window film 3M 40EXT applied on clear windows and for window film 3M 70 EXT applied on
both clear and tinted windows. This reduction is due to the decrease in cooling energy demand and
consumption observed during the cooling summer period because of the impact of the window films.
Figure 11b, showing the overall annual electricity cost, exhibits a similar trend to that observed in
Figure 11a. Percentage reductions in the overall annual electricity cost of 6% and 1% were observed
for window film 3M 40 EXT applied on clear and tinted windows, respectively. A reduction of
5% and 6% in electricity cost was seen for window film 3M 70 EXT applied on clear and tinted
windows, respectively.
18. Sustainability 2017, 9, 731 18 of 23
Sustainability 2017, 9, 731 18 of 23
Figure 11. Impact of window films on electricity cost.
From Figure 12a, it can be seen that generally, there is reduction in the overall energy cost during the
cooling-dominant period and a marginal increase during the heating season. Additionally, it can be
observed that window film 3M 40EXT applied on tinted window has the least favourable impact on energy
cost. This is because the marginal reduction in energy cost during the summer is countered by a similar
marginal increase in energy cost. A maximum percentage reduction in energy cost of 6% and 1% was
observed for window film 3M 40 EXT applied on clear and tinted windows, respectively. A maximum
percentage reduction of 5% and 6% was observed for window film 3M 70 EXT applied on clear and tinted
windows, respectively. From Figure 12b, showing the annual total energy cost due to the impact of the
window films, it can be observed that there is a reduction in the overall annual energy cost. The percentage
reduction in total energy cost of 3% was observed for window film 3M 40 EXT applied on clear windows
and 3M 70EXT applied on both clear and tinted windows. There was no increase or decrease in total energy
cost for 3M 40EXT applied on tinted windows.
Table 5 shows a summary of results of the percentage differences between the simulation model
without the window film compared to the one incorporating the window films for key energy
performance parameters. It can be observed that window film 3M 40EXT applied on tinted windows
provides the least favourable impact, whereas window films 3M 40 EXT applied on clear windows and 3M
Figure 11. Impact of window films on electricity cost.
From Figure 12a, it can be seen that generally, there is reduction in the overall energy cost during
the cooling-dominant period and a marginal increase during the heating season. Additionally, it can
be observed that window film 3M 40EXT applied on tinted window has the least favourable impact on
energy cost. This is because the marginal reduction in energy cost during the summer is countered
by a similar marginal increase in energy cost. A maximum percentage reduction in energy cost of 6%
and 1% was observed for window film 3M 40 EXT applied on clear and tinted windows, respectively.
A maximum percentage reduction of 5% and 6% was observed for window film 3M 70 EXT applied on
clear and tinted windows, respectively. From Figure 12b, showing the annual total energy cost due
to the impact of the window films, it can be observed that there is a reduction in the overall annual
energy cost. The percentage reduction in total energy cost of 3% was observed for window film 3M 40
EXT applied on clear windows and 3M 70EXT applied on both clear and tinted windows. There was
no increase or decrease in total energy cost for 3M 40EXT applied on tinted windows.
Table 5 shows a summary of results of the percentage differences between the simulation model
without the window film compared to the one incorporating the window films for key energy
performance parameters. It can be observed that window film 3M 40EXT applied on tinted windows
provides the least favourable impact, whereas window films 3M 40 EXT applied on clear windows and
3M 70EXT applied on both clear and tinted windows provide relatively better and similar performance.
Therefore, the choice of window film for this case study building can be made between these two
window films, with the preference depending on whether a less clear window film is required for
19. Sustainability 2017, 9, 731 19 of 23
privacy considerations. Savings in electricity cost is one key parameter that can be used to select an
appropriate window film since the electricity price rate and emissions factor are higher than for gas.
Based on this, window film 3M 40 EXT applied on clear windows is preferable since it provides a 6%
savings in electricity cost. In addition, its warm brown appearance should not affect the ambience of
the building.
Sustainability 2017, 9, 731 19 of 23
70EXT applied on both clear and tinted windows provide relatively better and similar performance.
Therefore, the choice of window film for this case study building can be made between these two window
films, with the preference depending on whether a less clear window film is required for privacy
considerations. Savings in electricity cost is one key parameter that can be used to select an appropriate
window film since the electricity price rate and emissions factor are higher than for gas. Based on this,
window film 3M 40 EXT applied on clear windows is preferable since it provides a 6% savings in
electricity cost. In addition, its warm brown appearance should not affect the ambience of the building.
Figure 12. Impact of window films on overall energy cost.Figure 12. Impact of window films on overall energy cost.
20. Sustainability 2017, 9, 731 20 of 23
Table 5. Summary table showing percentage difference between simulation results without window films compared to simulation results incorporating window films
on all orientation.
Window Films
Heating Energy
Consumption
(%)
Cooling Energy
Consumption
(%)
Total Energy
Consumption
(%)
Gas CO2
Emissions (%)
Electricity CO2
Emissions (%)
Total CO2
Emissions (%)
Electricity Cost
(%)
Total Energy
Cost (%)
3M 40EXT clear −1.3 32 1.9 −1 6 3 6 3
3M 40EXT tint −2 35 1.6 −1 1 0 1 0
3M 70EXT clear −0.2 28 2.1 −0.5 5 3 5 3
3M 70EXT tint −1.3 32 1.9 −1 6 3 6 3
Note: (− Negative) is percentage increase; (+ Positive) is percentage decrease.
21. Sustainability 2017, 9, 731 21 of 23
5. Summary and Conclusions
This work presented a case study on the evaluation of the impact of window films on the
energy performance of an existing U.K. hotel. The simulation was conducted using a building energy
simulation software (EDSL TAS); the energy prediction results of the software were validated with
actual building consumption data before a simulation of the effect of selected window films on the
energy consumption and performance of the building.
The results of the case study demonstrate that the impact of the selected window films (3M sun
control window film; Prestige 70 Exterior and Prestige 40 Exterior) on the overall energy consumption
is not substantial. The overall energy savings accruing from application of the films is approximately
2%, mainly from a reduction in cooling energy consumption.
Though this energy savings is marginal, an examination of the components of energy consumption,
that is, heating and cooling energy consumption, on which the window films have direct impact,
provides further insight into the effect of the window films. This investigation indicates that the
window films produce a reduction in cooling energy consumption of up to 35% during the peak of the
cooling season and a 35% reduction in the annual overall cooling energy consumption across the year
due to the reduction in solar heat gain via the window pane. However, some of this savings is slightly
negated during the heating period, with the results showing a maximum increase in heating energy
consumption of up to 11% during the peak of the heating-dominant season. However, the overall
increase in annual heating energy consumption is 2%.
The results of the cost and CO2 emissions analysis also demonstrate that cost and CO2 emissions
savings of up to 3% are achievable with the application of the window films. Additionally, critical
analysis of the results shows that window films 3M 40 EXT applied on clear window and 3M 70EXT
applied on both clear and tinted windows provide relatively better and similar performance. Hence, the
choice of window film for this case study building can be made between these three window films, with
the preference depending on whether the tinted window film is required for privacy considerations.
Furthermore, the results of the investigation indicate that the application of window films
alone, especially in relatively large hotel buildings, cannot significantly reduce the overall energy
consumption. Therefore, they can be more beneficial if used along with other energy efficiency
measures that can reduce the energy consumption of other components such as domestic hot water
and lighting, which make up a considerable proportion of overall energy consumption.
Acknowledgments: All sources of funding of the study should be disclosed. Please clearly indicate grants that
you have received in support of your research work. Clearly state if you received funds for covering the costs to
publish in open access.
Author Contributions: Ali Bahadori-Jahromi, Anastasia Mylona, Paulina Godfrey and Darren Cook
conceived and designed the project; Abdulazeez Rotimi performed the experiments and analyzed the data.
Ali Bahadori-Jahromi, Abdulazeez Rotimi and Anastasia Mylona wrote the paper. Ali Bahadori-Jahromi,
Anastasia Mylona, Paulina Godfrey and Darren Cook reviewed the paper.
Conflicts of Interest: The authors declare no conflict of interest.
References
1. King, D.; Browne, J.; Layard, R.; O’Donnell, G.; Rees, M.; Stern, N.; Turner, A. A global Apollo programme
to combat climate change. In Centre for Economic Performance; London School of Economics and Political
Science: London, UK, 2015.
2. Pérez-Lombard, L.; Ortiz, J.; Pout, C. A review on buildings energy consumption information. Energy Build.
2008, 40, 394–398. [CrossRef]
3. Ürge-Vorsatz, D.; Cabeza, L.F.; Serrano, S.; Barreneche, C.; Petrichenko, K. Heating and cooling energy trends
and drivers in buildings. Renew. Sustain. Energy Rev. 2015, 41, 85–98. [CrossRef]
22. Sustainability 2017, 9, 731 22 of 23
4. Hee, W.J.; Alghoul, M.A.; Bakhtyar, B.; Elayeb, O.; Shameri, M.A.; Alrubaih, M.S.; Sopian, K. The role of
window glazing on daylighting and energy saving in buildings. Renew. Sustain. Energy Rev. 2015, 42,
323–343. [CrossRef]
5. Carbon Trust (2013) Energy Efficiency in Non-Domestic Buildings. Available online: https://www.
carbontrust.com/news/2013/09/energy-efficiency-in-non-domestic-buildings/ (accessed on 2 July 2016).
6. Sorgato, M.J.; Melo, A.P.; Lamberts, R. The effect of window opening ventilation control on residential
building energy consumption. Energy Build. 2016, 133, 1–13. [CrossRef]
7. Ihara, T.; Gustavsen, A.; Jelle, B.P. Effect of facade components on energy efficiency in office buildings.
Appl. Energy 2015, 158, 422–432. [CrossRef]
8. Li, C.; Tan, J.; Chow, T.-T.; Qiu, Z. Experimental and theoretical study on the effect of window films on
building energy consumption. Energy Build. 2015, 102, 129–138. [CrossRef]
9. Wang, L.; Greenberg, S. Window operation and impacts on building energy consumption. Energy Build. 2015,
92, 313–321. [CrossRef]
10. Cuce, E.; Riffat, S.B. A state-of-the-art review on innovative glazing technologies. Renew. Sustain. Energy Rev.
2015, 41, 695–714. [CrossRef]
11. Huang, Y.; Niu, J.-L.; Chung, T.-M. Comprehensive analysis on thermal and daylighting performance of
glazing and shading designs on office building envelope in cooling-dominant climates. Appl. Energy 2014,
134, 215–228. [CrossRef]
12. Jelle, B.P.; Hynd, A.; Gustavsen, A.; Arasteh, D.; Goudey, H.; Hart, R. Fenestration of today and tomorrow:
A state-of-the-art review and future research opportunities. Solar Energy Mater. Solar Cells 2012, 96, 1–28.
[CrossRef]
13. Glass and Glazing Federation (2012) Window Film: Application and Solutions. Available online: www.ggf.
uk/windowfilm (accessed on 5 November 2016).
14. Plummer, J.R. (2015) Window Film: A Cost Effective Window Retrofit. Available online: http://
www.greenbuildermedia.com/buildingscience/window-film-a-cost-effective-window-retrofit (accessed
on 3 November 2016).
15. Yousif, K.M. Control of Solar Heat Gain to Reduce the Energy Consumption of Buildings in Iraq.
In Proceedings of the World Renewable Energy Forum, Denver, CO, USA, 13–17 May 2012; pp. 1–8.
16. Yin, R.; Xu, P.; Shen, P. Case study: Energy savings from solar window film in two commercial buildings in
Shanghai. Energy Build. 2012, 45, 132–140. [CrossRef]
17. American Society of Heating Refrigerating and Air-conditioning Engineers, ASHRAE (2001) Handbook
Fundamentals 2001, (Chapter 30: Fenestration). Available online: https://eclass.upatras.gr/modules/
document/file.php/ARCH160/fenestration.pdf (accessed on 8 February 2017).
18. Dussault, J.M.; Gosselin, L.; Galstian, T. Integration of smart windows into building design for reduction of
yearly overall energy consumption and peak loads. Solar Energy 2012, 86, 3405–3416. [CrossRef]
19. Chen, B.; Ji, Y.; Xu, P. Impact of Window Shading Devices on Energy Performance of Prototypical Buildings;
Tongji University: Shanghai, China, 2012; pp. 1–8.
20. Carriere, M.; Schoenau, G.J.; Besant, R.W. Investigation of some large building energy conservation
opportunities using the DOE-2 model. Energy Conv. Manag. 1999, 40, 861–872. [CrossRef]
21. Yang, Q.; Liu, M.; Shu, C.; Mmereki, D.; Uzzal Hossain, M.; Zhan, X. Impact Analysis of Window-Wall Ratio
on Heating and Cooling Energy Consumption of Residential Buildings in Hot Summer and Cold Winter
Zone in China. J. Eng. (USA) 2015. [CrossRef]
22. Vanhoutteghem, L.; Skarning, G.C.J.; Hviid, C.A.; Svendsen, S. Impact of façade window design on energy,
daylighting and thermal comfort in nearly zero-energy houses. Energy Build. 2015, 102, 149–156. [CrossRef]
23. Crawley, D.B.; Hand, J.W.; Kummert, M.; Griffith, B.T. Contrasting the capabilities of building energy
performance simulation programs. Build. Environ. 2008, 43, 661–673. [CrossRef]
24. EDSL TAS (2015). Available online: http://www.edsl.net/main/Software/Designer/NVandPD.aspx
(accessed on 2 July 2015).
25. ATD Solar & Security Window Film (2012) Questions on Window Film, Tinting, Glass. Available online:
http://atdwindowfilm.com/frequently-asked-questions/#1 (accessed on 6 April 2017).
26. 3M (2017). Prestige Window Film. Available online: http://solutions.3m.co.uk/wps/portal/3M/en_GB/
3MWindowFilm/WindowFilm/Products/Prestige/ (accessed on 8 February 2017).