For those in Colorado Springs, installing window film is top of the mind in spring, since the days of excessive cooling bills are right around the corner. Read more: https://www.greenlightwindowfilms.com/window-film-in-colorado-springs/reduced-energy-cost-in-colorado-springs/
Cascaded Thermodynamic and Environmental Analyses of Energy Generation Modali...Ozyegin University
This study presents cascaded thermodynamic and environmental analyses of a high-performance academic building. Five different energy efficiency measures and operation scenarios are evaluated based on the actual measurements starting from the initial design concept. The study is to emphasize that by performing dynamical energy, exergy, exergoeconomic, and environmental analyses with increasing complexity, a better picture of building performance indicators can be obtained for both the building owners and users, helping them to decide on different investment strategies. As the first improvement, the original design is modified by the addition of a ground-air heat exchanger for pre-conditioning the incoming air to heat the ground floors. The installation of roof-top PV panels to use solar energy is considered as the third case, and the use of a trigeneration system as an energy source instead of traditional boiler systems is considered as the fourth case. The last case is the integration of all these three alternative energy modalities for the building. It is determined that the use of a trigeneration system provides a better outcome than the other scenarios for decreased energy demand, for cost reduction, and for the improved exergy efficiency and sustainability index values relative to the original baseline design scenario. Yet, an integrated approach combining all these energy generation modalities provide the best return of investment.
In a plethora of countries, buildings are adapted to the local climate condition using sustainable architecture techniques and materials, thereby the highest level of climatic comfort is provided. For example, the walls and roofs reflecting sunlight have been used for centuries in the warm regions of the world, while in the cold regions, the maximum use of solar energy has been tended.
The process of modernization has created a high density, thereby demand for fast and affordable constructions in cities has subsequently increased, resulting in reduced attention to environmentally sustainable architecture techniques that, in turn, has led to the financial loss and scarcity of non-renewable energy resources over long periods of time.
Regarding the energy crisis and the necessity of saving non-renewable energy, the reduced need to use heating/cooling systems is assumed to be one of the key goals in advanced building design.
The present study was conducted based on causal research and simulation. Design Builder thermal simulation software was used as the tool to this end. Therefore, a building with/out solar chimney was modeled and analyzed to identify the effect of solar chimney on the amount of energy used for heating.
Window film is a way to make your Denver home more energy efficient in 2019 and save you a fair amount of money on utilities for years to come! Read more here:https://www.scottishwindowtinting.com/denver-window-film/window-film-energy-efficiency/
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Since the 1970s, energy efficiency in buildings has primarily focused on reducing operational energy. However, as buildings become more efficient, embodied energy becomes increasingly significant. With the rise in green building programs, architects and engineers are giving more attention to ways that reduce embodied energy. This paper presents opportunities to address embodied energy in buildings.
Cascaded Thermodynamic and Environmental Analyses of Energy Generation Modali...Ozyegin University
This study presents cascaded thermodynamic and environmental analyses of a high-performance academic building. Five different energy efficiency measures and operation scenarios are evaluated based on the actual measurements starting from the initial design concept. The study is to emphasize that by performing dynamical energy, exergy, exergoeconomic, and environmental analyses with increasing complexity, a better picture of building performance indicators can be obtained for both the building owners and users, helping them to decide on different investment strategies. As the first improvement, the original design is modified by the addition of a ground-air heat exchanger for pre-conditioning the incoming air to heat the ground floors. The installation of roof-top PV panels to use solar energy is considered as the third case, and the use of a trigeneration system as an energy source instead of traditional boiler systems is considered as the fourth case. The last case is the integration of all these three alternative energy modalities for the building. It is determined that the use of a trigeneration system provides a better outcome than the other scenarios for decreased energy demand, for cost reduction, and for the improved exergy efficiency and sustainability index values relative to the original baseline design scenario. Yet, an integrated approach combining all these energy generation modalities provide the best return of investment.
In a plethora of countries, buildings are adapted to the local climate condition using sustainable architecture techniques and materials, thereby the highest level of climatic comfort is provided. For example, the walls and roofs reflecting sunlight have been used for centuries in the warm regions of the world, while in the cold regions, the maximum use of solar energy has been tended.
The process of modernization has created a high density, thereby demand for fast and affordable constructions in cities has subsequently increased, resulting in reduced attention to environmentally sustainable architecture techniques that, in turn, has led to the financial loss and scarcity of non-renewable energy resources over long periods of time.
Regarding the energy crisis and the necessity of saving non-renewable energy, the reduced need to use heating/cooling systems is assumed to be one of the key goals in advanced building design.
The present study was conducted based on causal research and simulation. Design Builder thermal simulation software was used as the tool to this end. Therefore, a building with/out solar chimney was modeled and analyzed to identify the effect of solar chimney on the amount of energy used for heating.
Window film is a way to make your Denver home more energy efficient in 2019 and save you a fair amount of money on utilities for years to come! Read more here:https://www.scottishwindowtinting.com/denver-window-film/window-film-energy-efficiency/
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Since the 1970s, energy efficiency in buildings has primarily focused on reducing operational energy. However, as buildings become more efficient, embodied energy becomes increasingly significant. With the rise in green building programs, architects and engineers are giving more attention to ways that reduce embodied energy. This paper presents opportunities to address embodied energy in buildings.
IJERA (International journal of Engineering Research and Applications) is International online, ... peer reviewed journal. For more detail or submit your article, please visit www.ijera.com
ANALYSIS OF ENERGY CONSERVATION OF AN INSTITUTIONAL BUILDING USING DESIGN BUI...ijmech
Buildings contribute impact on CO2 emission and energy consumption. Electric energy
consumption in buildings is about 40% of the total energy consumption of India. In this work building
simulation technology is used to evaluate a variety of envelope thermal characteristics and low carbon
technology in an integrated manner at the early design stage itself to assist the delivering of sustainable
green buildings with a high rating of performance and energy consumption. Building simulation enables
designer to identify the key energy loads, test their strategies and compare permutation of design strategy
in order to optimize the energy consumption.
Design Builder (DB) software is used to carry out a series of sensitivity analysis on set of design
parameters, with an aim to achieve a comfortable and energy efficient building. Several parametric studies
have been conducted to enable building designers to carry out analysis of energy efficient building model
related to building orientation, construction, air infiltration, natural ventilation, window type, openings,
and lighting. To calculate the energy saving, basic condition of building model is compared with Energy
Conservation Building Code (ECBC) building model. Consider basic condition of building is case A and
condition of building according to ECBC is case B.
Human Habits and Energy Consumption in Residential BuildingsLeonardo ENERGY
Highlights:
* Looks into users’ heating habits in residential buildings.
* Discusses the term ‘rebound’ - the fact that improved efficiency can result in more spending.
* Gives factual proof that direct rebound plays leading role in energy consumption in residential buildings.
Multidisciplinary Journal Supported by TETFund. The journals would publish papers covering a wide range of subjects in journal science, management science, educational, agricultural, architectural, accounting and finance, business administration, entrepreneurship, business education, all journals
Energy-Efficient Buildings of Tomorrow: Built on a Policy Cornerstone Today Alliance To Save Energy
According to the Energy Information Administration, the carbon dioxide emissions of the U.S. building sector are almost equal to the total CO2 emissions of India and Japan combined.
Performance Analysis of BIPV Prototype System Installed in Greece and Main Af...CrimsonpublishersPRSP
Performance Analysis of BIPV Prototype System Installed in Greece and Main Affecting Parameters by A Peppas*, K Kollias, M Taxiarchou, D Mantelis, Ch Politi and I Paspaliaris in Peer Review Journal of Solar & Photoenergy Systems
Influence of Glazed Façades on Energy Consumption for Air Conditioning of Off...IJERA Editor
The energy performance of buildings is defined by their electrical systems and thermal exchanges through the envelope, mainly by glazing systems. This study evaluates, through computer simulation, the influence of glazing façades in the energy consumption of the air conditioning system of an office building in five Brazilian cities with different climate conditions. A computer model was developed to analyze the influence of windowto-wall ratio, type of glass and façade configuration in the energy need for air conditioning. The results show that the energy performance of the building is highly influenced by the configurations of the façade, mainly by glazed elements. In cold climates, high thermal transmittance of the envelope helps the dissipation of internal heat gains, reducing energy consumption for air conditioning. In this case, the use of insulated glass unit can be unhelpful. Furthermore, the opening area causes energy consumption variation up to 27.5% depending on climate and type of glass. But the use of a high selective glazing system can decrease the energy need for cooling when the window area is increased.
Window tinting is an affordable way for you to make your home more energy efficient and pays for itself in about 3 years. Read more here: https://www.scottishwindowtinting.com/window-film/energy-efficiency/lower-energy-costs-in-2019/
Window film is a way to make your Fort Worth home more energy efficient in 2019 and save you a fair amount of money on utilities for years to come! Read more:https://www.greenlightwindowfilms.com/energy-efficient-window-film/window-film-energy-efficiency/
Impact of window films on the overall energy consumption studyFortWorthWindowFilm1
Window tinting is an affordable way for you to make your home more energy efficient and pays for itself in about 3 years. Read more in our blog: https://www.fortworthwindowfilm.com/window-tinting-benefits/energy-efficient-window-tint/energy-window-film-in-fort-worth/
Impact of window films on the overall energy consumption studywindowfilmkansascity
Energy Efficiency is an important part of homeownership not only because it is a green solution but because it saves money too! Read more at: https://www.windowfilmkansascity.com/window-tinting-benefits/energy-efficient-window-film/the-benefits-of-window-film/
Energy Efficiency is an important part of homeownership not only because it is a green solution but because it saves money too! Read more here:https://www.scottishwindowtinting.com/fort-collins-window-film/understanding-the-benefits-of-energy-audits-and-window-film/
Impact of window films on the overall energy consumption studydallaswindowfilm
Window film is a way to make your Dallas home more energy efficient in 2019 and save you a fair amount of money on utilities for years to come! Read more: https://www.dallaswindowfilm.com/window-tinting-benefits/energy-efficiency/window-film-energy-efficiency/
Energy Efficiency is an important part of homeownership not only because it is a green solution but because it saves money too! Read more here: https://www.denvercommercialwindowtinting.com/a-guide-to-understanding-the-benefits-of-energy-audits-and-window-film/
Window tinting is an affordable way for you to make your home more energy efficient and pays for itself in about 3 years. https://www.commercialwindowtintingsaltlake.com/energy-efficient-window-film-2019/
Impact of window films on the overall energy consumption studywindowfilmhouston
Window film is a way to make your Austin home more energy efficient in 2019 and save you a fair amount of money on utilities for years to come! Read more:https://www.windowfilmaustin.net/window-tinting-benefits/energy-efficient-window-tint/window-film-energy-efficiency/
Energy simulation & analysis of two residential buildingschirag aggarwal
-> Analysed and compared the energy consumption of a residential building modelled using common building materials and specifications used in Delhi for decades to that of modelled by altering the building envelope and the AC system specifications.
-> Used eQUEST software.
IJERA (International journal of Engineering Research and Applications) is International online, ... peer reviewed journal. For more detail or submit your article, please visit www.ijera.com
ANALYSIS OF ENERGY CONSERVATION OF AN INSTITUTIONAL BUILDING USING DESIGN BUI...ijmech
Buildings contribute impact on CO2 emission and energy consumption. Electric energy
consumption in buildings is about 40% of the total energy consumption of India. In this work building
simulation technology is used to evaluate a variety of envelope thermal characteristics and low carbon
technology in an integrated manner at the early design stage itself to assist the delivering of sustainable
green buildings with a high rating of performance and energy consumption. Building simulation enables
designer to identify the key energy loads, test their strategies and compare permutation of design strategy
in order to optimize the energy consumption.
Design Builder (DB) software is used to carry out a series of sensitivity analysis on set of design
parameters, with an aim to achieve a comfortable and energy efficient building. Several parametric studies
have been conducted to enable building designers to carry out analysis of energy efficient building model
related to building orientation, construction, air infiltration, natural ventilation, window type, openings,
and lighting. To calculate the energy saving, basic condition of building model is compared with Energy
Conservation Building Code (ECBC) building model. Consider basic condition of building is case A and
condition of building according to ECBC is case B.
Human Habits and Energy Consumption in Residential BuildingsLeonardo ENERGY
Highlights:
* Looks into users’ heating habits in residential buildings.
* Discusses the term ‘rebound’ - the fact that improved efficiency can result in more spending.
* Gives factual proof that direct rebound plays leading role in energy consumption in residential buildings.
Multidisciplinary Journal Supported by TETFund. The journals would publish papers covering a wide range of subjects in journal science, management science, educational, agricultural, architectural, accounting and finance, business administration, entrepreneurship, business education, all journals
Energy-Efficient Buildings of Tomorrow: Built on a Policy Cornerstone Today Alliance To Save Energy
According to the Energy Information Administration, the carbon dioxide emissions of the U.S. building sector are almost equal to the total CO2 emissions of India and Japan combined.
Performance Analysis of BIPV Prototype System Installed in Greece and Main Af...CrimsonpublishersPRSP
Performance Analysis of BIPV Prototype System Installed in Greece and Main Affecting Parameters by A Peppas*, K Kollias, M Taxiarchou, D Mantelis, Ch Politi and I Paspaliaris in Peer Review Journal of Solar & Photoenergy Systems
Influence of Glazed Façades on Energy Consumption for Air Conditioning of Off...IJERA Editor
The energy performance of buildings is defined by their electrical systems and thermal exchanges through the envelope, mainly by glazing systems. This study evaluates, through computer simulation, the influence of glazing façades in the energy consumption of the air conditioning system of an office building in five Brazilian cities with different climate conditions. A computer model was developed to analyze the influence of windowto-wall ratio, type of glass and façade configuration in the energy need for air conditioning. The results show that the energy performance of the building is highly influenced by the configurations of the façade, mainly by glazed elements. In cold climates, high thermal transmittance of the envelope helps the dissipation of internal heat gains, reducing energy consumption for air conditioning. In this case, the use of insulated glass unit can be unhelpful. Furthermore, the opening area causes energy consumption variation up to 27.5% depending on climate and type of glass. But the use of a high selective glazing system can decrease the energy need for cooling when the window area is increased.
Window tinting is an affordable way for you to make your home more energy efficient and pays for itself in about 3 years. Read more here: https://www.scottishwindowtinting.com/window-film/energy-efficiency/lower-energy-costs-in-2019/
Window film is a way to make your Fort Worth home more energy efficient in 2019 and save you a fair amount of money on utilities for years to come! Read more:https://www.greenlightwindowfilms.com/energy-efficient-window-film/window-film-energy-efficiency/
Impact of window films on the overall energy consumption studyFortWorthWindowFilm1
Window tinting is an affordable way for you to make your home more energy efficient and pays for itself in about 3 years. Read more in our blog: https://www.fortworthwindowfilm.com/window-tinting-benefits/energy-efficient-window-tint/energy-window-film-in-fort-worth/
Impact of window films on the overall energy consumption studywindowfilmkansascity
Energy Efficiency is an important part of homeownership not only because it is a green solution but because it saves money too! Read more at: https://www.windowfilmkansascity.com/window-tinting-benefits/energy-efficient-window-film/the-benefits-of-window-film/
Energy Efficiency is an important part of homeownership not only because it is a green solution but because it saves money too! Read more here:https://www.scottishwindowtinting.com/fort-collins-window-film/understanding-the-benefits-of-energy-audits-and-window-film/
Impact of window films on the overall energy consumption studydallaswindowfilm
Window film is a way to make your Dallas home more energy efficient in 2019 and save you a fair amount of money on utilities for years to come! Read more: https://www.dallaswindowfilm.com/window-tinting-benefits/energy-efficiency/window-film-energy-efficiency/
Energy Efficiency is an important part of homeownership not only because it is a green solution but because it saves money too! Read more here: https://www.denvercommercialwindowtinting.com/a-guide-to-understanding-the-benefits-of-energy-audits-and-window-film/
Window tinting is an affordable way for you to make your home more energy efficient and pays for itself in about 3 years. https://www.commercialwindowtintingsaltlake.com/energy-efficient-window-film-2019/
Impact of window films on the overall energy consumption studywindowfilmhouston
Window film is a way to make your Austin home more energy efficient in 2019 and save you a fair amount of money on utilities for years to come! Read more:https://www.windowfilmaustin.net/window-tinting-benefits/energy-efficient-window-tint/window-film-energy-efficiency/
Energy simulation & analysis of two residential buildingschirag aggarwal
-> Analysed and compared the energy consumption of a residential building modelled using common building materials and specifications used in Delhi for decades to that of modelled by altering the building envelope and the AC system specifications.
-> Used eQUEST software.
Proper ventilation in one of the primary requirements of any domestic or commercial buildings. The conventional method employs usage of air conditioning or air cooling systems which requires high power consumption. The solar driven ventilation systems can be used in buildings which doesn’t require any external power. The current research reviews various researches conducted in improving system of passive ventilation along use of phase change material as energy storage system. Passive design of buildings does not use the electrical and mechanical systems in providing comfortable indoor environment. Prem Shankar Sahu | Praveen Kumar | Ajay Singh Paikra "Review on Solar Chimney Ventilation" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-4 , June 2021, URL: https://www.ijtsrd.compapers/ijtsrd42427.pdf Paper URL: https://www.ijtsrd.comengineering/mechanical-engineering/42427/review-on-solar-chimney-ventilation/prem-shankar-sahu
Building Energy Simulation project by using eQuestAsadullah Malik
The energy shortage crisis and the rapid change of global climate have become important issues in the world now a days since modern trends are shifting to more sustainable solutions to save energy and to reduce the emission of carbon dioxide. Generally speaking, when improving energy efficiency and adopting the energy –saving design, the advantage is not only providing low operating cost for stakeholders, but also reducing the negative impact on the global and ambient environment. This study analyzes the surveyed building integral energy consumption, evaluates its energy performance, and gives further recommendations for saving energy costs by using dynamic energy simulation tool eQuest.
A Life-cycle Cost-benefit Analysis for Rooftop Photovoltaic Systems in Lightw...IEREK Press
There is a widespread consensus that energy efficiency of buildings is an essential component of sustainable developmentand several kinds of renewable energy technologies have been widely used to achieve this sustainable goal. As a rapidly developing country, China’s manufacturing industry still occupies a prominent position, with a large number of industrial buildingsthat are also a crucial part of urban planning. Compared with multi-story and high-rise commercial buildings, large industrial sheds have a much more usable roof area, where rooftop photovoltaic (PV) systems are increasingly used. However, due to the small structural margins of the lightweight steel-structured (LSS) industrial buildings and the large initial investment of the thin-film PV system, few case studies are available for this kind of industrial buildings. In this research, three representative cities in China, with varying levels of solar radiation availability, are selected as typical external design factors. Taking a typical LSS industrial building with an added thin-film rooftop PV system as an example, a life-cycle cost-benefit analysis is conducted from environmental and economic aspects. The results of the analysis demonstrate the effectiveness of the rooftop thin-film PV system as a means to increase the energy efficiency of the LSS industrial buildings.
Similar to Case study: Energy Savings With Window Film (20)
Keep your home or building from getting cold during the winter and save money. Invest in 3M Thinsulate Window Film for your Colorado Springs property today. https://www.greenlightwindowfilms.com/colorado-springs/colorado-springs-3m-thinsulate-window-film/
Window film and tint are similar but the differences are important to understand. Read more here: https://www.greenlightwindowfilms.com/ag/co-springs-window-tint-and-film/
Website: https://www.greenlightwindowfilms.com/cities-we-serve/colorado-springs/
Green Light Window Films Colorado Springs.
This file is from Colorado Springs, Colorado. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Green Light Window Film hopes you enjoy
Website: https://www.greenlightwindowfilms.com/cities-we-serve/colorado-springs/
Green Light Window Films Colorado Springs.
This file is from Colorado Springs, Colorado. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Green Light Window Film hopes you enjoy
Website: https://www.greenlightwindowfilms.com/cities-we-serve/colorado-springs/
Green Light Window Films Colorado Springs.
This file is from Colorado Springs, Colorado. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Green Light Window Film hopes you enjoy
Website: https://www.greenlightwindowfilms.com/cities-we-serve/colorado-springs/
Green Light Window Films Colorado Springs.
This file is from Colorado Springs, Colorado. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Green Light Window Film hopes you enjoy
Website: https://www.greenlightwindowfilms.com/cities-we-serve/colorado-springs/
Green Light Window Films Colorado Springs.
This file is from Colorado Springs, Colorado. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Green Light Window Film hopes you enjoy
Website: https://www.greenlightwindowfilms.com/cities-we-serve/colorado-springs/
Green Light Window Films Colorado Springs.
This file is from Colorado Springs, Colorado. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Green Light Window Film hopes you enjoy
Website: https://www.greenlightwindowfilms.com/cities-we-serve/colorado-springs/
Green Light Window Films Colorado Springs.
This file is from Colorado Springs, Colorado. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Green Light Window Film hopes you enjoy
Website: https://www.greenlightwindowfilms.com/cities-we-serve/colorado-springs/
Green Light Window Films Colorado Springs.
This file is from Colorado Springs, Colorado. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Green Light Window Film hopes you enjoy
Website: https://www.greenlightwindowfilms.com/cities-we-serve/colorado-springs/
Green Light Window Films Colorado Springs.
This file is from Colorado Springs, Colorado. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Green Light Window Film hopes you enjoy
Website: https://www.greenlightwindowfilms.com/cities-we-serve/colorado-springs/
Green Light Window Films Colorado Springs.
This file is from Colorado Springs, Colorado. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Green Light Window Film hopes you enjoy
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024Tobias Schneck
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
Neuro-symbolic is not enough, we need neuro-*semantic*Frank van Harmelen
Neuro-symbolic (NeSy) AI is on the rise. However, simply machine learning on just any symbolic structure is not sufficient to really harvest the gains of NeSy. These will only be gained when the symbolic structures have an actual semantics. I give an operational definition of semantics as “predictable inference”.
All of this illustrated with link prediction over knowledge graphs, but the argument is general.
Let's dive deeper into the world of ODC! Ricardo Alves (OutSystems) will join us to tell all about the new Data Fabric. After that, Sezen de Bruijn (OutSystems) will get into the details on how to best design a sturdy architecture within ODC.
JMeter webinar - integration with InfluxDB and GrafanaRTTS
Watch this recorded webinar about real-time monitoring of application performance. See how to integrate Apache JMeter, the open-source leader in performance testing, with InfluxDB, the open-source time-series database, and Grafana, the open-source analytics and visualization application.
In this webinar, we will review the benefits of leveraging InfluxDB and Grafana when executing load tests and demonstrate how these tools are used to visualize performance metrics.
Length: 30 minutes
Session Overview
-------------------------------------------
During this webinar, we will cover the following topics while demonstrating the integrations of JMeter, InfluxDB and Grafana:
- What out-of-the-box solutions are available for real-time monitoring JMeter tests?
- What are the benefits of integrating InfluxDB and Grafana into the load testing stack?
- Which features are provided by Grafana?
- Demonstration of InfluxDB and Grafana using a practice web application
To view the webinar recording, go to:
https://www.rttsweb.com/jmeter-integration-webinar
Search and Society: Reimagining Information Access for Radical FuturesBhaskar Mitra
The field of Information retrieval (IR) is currently undergoing a transformative shift, at least partly due to the emerging applications of generative AI to information access. In this talk, we will deliberate on the sociotechnical implications of generative AI for information access. We will argue that there is both a critical necessity and an exciting opportunity for the IR community to re-center our research agendas on societal needs while dismantling the artificial separation between the work on fairness, accountability, transparency, and ethics in IR and the rest of IR research. Instead of adopting a reactionary strategy of trying to mitigate potential social harms from emerging technologies, the community should aim to proactively set the research agenda for the kinds of systems we should build inspired by diverse explicitly stated sociotechnical imaginaries. The sociotechnical imaginaries that underpin the design and development of information access technologies needs to be explicitly articulated, and we need to develop theories of change in context of these diverse perspectives. Our guiding future imaginaries must be informed by other academic fields, such as democratic theory and critical theory, and should be co-developed with social science scholars, legal scholars, civil rights and social justice activists, and artists, among others.
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
2. R. Yin et al. / Energy and Buildings 45 (2012) 132–140 133
thermal performance of building glazing systems [12]. Wei and
He from Nanjing University of Technology, have made contribu-
tions to the study of energy savings analysis of the glazing system
by employing computer simulations [13,14]. Pu et al., from Shen-
zhen Building Science Research Institute, evaluated the impact of
the glazing system on the HVAC load and the energy consumption
of the whole building [15]. Yang and Di, from Tsinghua Univer-
sity, conducted research on the energy efficiency of low-E glazing
systems [16].
Several studies have also been conducted to demonstrate the
effect of solar control window films on reducing the annual energy
consumption and peak demand load in summer. Noh-Pat et al.
developed a mathematical model for the natural convection of air
on the vertical canal in a double glazing unit to study the effects of
a solar control film. It was found that heat gains through windows
can be reduced by 55% with solar control films outside the inner
window compared to the traditional glazing system without solar
control films [17]. Li et al. studied the lighting and cooling energy
performance for a fully air-conditioned, open-plan office to evalu-
ate the effects of solar control films together with lighting controls.
It was found that solar film coatings coupled with light dimming
controls can reduce the electricity usage and the lighting and cool-
ing energy consumption by 21.2% and 6.9%, respectively [18]. Li
et al. also conducted field measurements of solar control window
films in an air-conditioned office building, and the results indicated
diffuse solar radiation can be reduced by 30% using the window film
coating [19].
Additionally, many studies have been conducted to evaluate the
energy performance of energy conservation measures (ECMs) using
building energy simulation tools. Pan et al. developed simulation
models of two office buildings with a data center, in Shanghai,
China, to evaluate the energy cost savings of various ECMs com-
pared with the baseline building [20]. Yin et al. presented the
procedure used to develop and calibrate simulation models of 11
commercial buildings in California [21]. Wong et al. also used the
DOE-2 energy simulation tool to evaluate the effects of rooftop gar-
dens on the energy performance of a five-story commercial building
in Singapore [22].
This study develops a procedure to estimate the energy perfor-
mance of solar control window films as an energy saving retrofit
to exist buildings. Using building energy simulation for the entire
building, this study analyzes how the characteristics of the glazing
system, with and without window films, influence energy con-
sumption and peak demand.
2. Methodology
As shown in Fig. 1, the Lawrence Berkeley National Laboratory
(LBNL) series of window software (Optics and WINDOW 6) were
adopted to estimate the energy performance of the window films.
Optics was used to calculate the optical properties of different types
of glazing systems, such as a single clear glazing system, double
clear glazing system, double low-E glazing system and a glazing
system with and without low-E film, solar control window films.
The glazing system database in Optics covers most types of sys-
tems that global manufacturers produce. In this study, Optics 5.1
was used to calculate the optical properties of a glazing system
with and without solar control window films to provide a supple-
mentary database of glazing systems for WINDOW 6. The optical
results were imported into the database in WINDOW 6. WINDOW
6 was used to analyze the thermal and optical performance of the
glazing system, which included the U-value, shading coefficient,
solar heat gain coefficient, visible and solar transmittance, etc. The
output from WINDOW 6 was saved in DOE format to be used in
eQUEST.
The process of developing the building simulation model
involves data collection, model development and model calibra-
tion. The collected data include architecture drawings, building
envelope characteristics, occupancy, lighting and plug load power
and operating schedules, HVAC system characteristics and oper-
ating schedules, measured building energy use, etc. The building’s
internal load parameters, such as occupancy, lighting and plug load
power and operating schedules, needed to be refined and calibrated
by comparing the simulated results with measured data. After the
simulation models were calibrated, they were used to analyze the
effect of window films on reducing energy consumption and peak
power demand in summer. Since this study focuses on how the
characteristics of the glazing system influence building energy con-
sumption, some variable parameters that were unavailable were
input into the model based on the building characteristics of a
typical museum building.
2.1. Simulation model development
The building used in the case study is an auto-museum located
in Shanghai, China, which contains approximately 27,985 m2 on
five floors used for auto exhibitions, offices and meeting spaces. As
shown in Fig. 2, the building has partial shading from east-facing
and west-facing window curtain walls to maximize day lighting.
The U-values of the exterior wall and the roof are 0.48 W/m2 K and
0.24 W/m2 K, respectively. The internal loads with the initial simu-
lation model give the occupancy density at 11.0 m2 per person; the
lighting density is 11.5 W/m2, and the plug load density is 2.8 W/m2.
The HVAC system is a split heat pump with a DX coil (Direct-
Expansion) system. The designed outdoor air flow rate per person
is 20 m3/h. The infiltration rate is set at grade II (0.6 m3/m2 h) base
on the designed window curtain wall. The heating set point is 21 ◦C,
and the cooling set point is 25 ◦C during the museum’s operating
hours.
2.1.1. Window curtain wall
The window curtain wall is composed of two types of glaz-
ing systems: an 8 + 12A + 6 double low-E glazing system and an
8 + 12A + 6 beige double low-E glazing system. There is no difference
between the thermal and optical performance in these two types of
glazing system. The simulation model selected the 8 + 12A + 6 dou-
ble low-E glazing system as the input window type and neglected
the influence of the glass sideboard that revolved around the build-
ing. Optics 5 and WINDOW 6 were used to calculate the thermal
and optical characteristics of the glazing system with/without solar
control window films and exported the results into DOE format files
for simulation in eQUEST.
Fig. 3 shows all types of glazing system with/without window
films that were analyzed with the model. Type A is the origi-
nal glazing system of the actual building, type A-1 and type A-2
are optimized glazing systems with window films sticking inside
and outside, respectively. Tables 1 and 2 present all thermal and
optical properties of the glazing systems with/without window
films. By analyzing the calculated results of the glazing systems
with/without window films, the U-values of the type A-1 and type
A-2 glazing systems were reduced by a small amount compared
to the original glazing system without window films. Compared to
the original glazing system, both the shading coefficient and solar
heat gain coefficient for the type A-1 glazing system was reduced by
13.6%, and the relative heat gain decreased by approximately 13.1%;
the shading coefficient and solar heat gain coefficient of the type
A-2 glazing system were reduced by 35.7%, and the relative heat
gain decreased by 34.5%. For the type A-1 and A-2 glazing systems,
the visible transmittance was reduced by approximately 44–50%
after sticking the window film onto the original glazing system.
3. 134 R. Yin et al. / Energy and Buildings 45 (2012) 132–140
Fig. 1. Procedure to estimate the energy performance of solar control window film.
Fig. 2. eQUEST model.
Fig. 3. Glazing systems (double low-E) with and without window films.
2.2. Calibration to the simulation model
Pan et al. and Yin et al. applied the ASHRAE Guideline 14-
2002 to calibrate whole-building simulation models to measured
data [21,23,24]. Norford et al. presented a commonsense proce-
dure for calibrating a DOE-2 computer model of a commercial
building, and they identified the major building loads, including
lighting and equipment [25]. Yin et al. used the measured data for
Table 1
Thermal and optical properties of glazing systems with/without window films.
Glazing system type K (W/m2
K) SC SHGC Relative heat gain (W/m2
) Visible transmittance
A 1.802 0.630 0.548 411 0.714
A-1 1.778 0.544 0.473 357 0.358
A-2 1.801 0.405 0.352 269 0.399
4. R. Yin et al. / Energy and Buildings 45 (2012) 132–140 135
Table 2
Other optical properties of glazing systems with/without window films.
Glazing system type Visible Solar UV
Transmittance Reflectance Transmittance Reflectance Absorptance Transmittance
Front Back Front Back Front Back
A 0.714 0.120 0.130 0.474 0.162 0.197 0.306 0.058 0.330
A-1 0.358 0.147 0.115 0.214 0.179 0.137 0.312 0.296 0.001
A-2 0.399 0.119 0.180 0.268 0.130 0.151 0.569 0.033 0.001
0
2000
4000
6000
8000
10000
12000
11/110/19/18/17/16/15/14/13/12/11/1
Electricityconsumption/(kWh)
Time
Fig. 4. Entire building electricity usage in 2008.
building electricity usage during the heating season to calibrate
the lighting and plug load densities and operating schedules [21].
Paul et al. described a systematic, evidence-based methodology for
the calibration of simulation models, which is intended for detailed
calibration with high resolution measured data [26].
Fig. 4 shows the daily electricity usage of the entire building from
January to October 2008; notice that the HVAC system did not oper-
ate from March to June, except for a few days. As shown in Fig. 5,
the electricity usage on each day was almost the same, except on
April 14th and April 15th, which indicated that the lighting and plug
load was steady throughout the transition season. The daily aver-
age electricity usage on off-peak, mid-peak and on-peak periods
was 370 kWh, 1199 kWh and 611 kWh, respectively. By evaluating
the difference in electricity usage between the heating & cooling
seasons and the transition season, the electricity usage of the HVAC
system during the heating and cooling season could be predicted.
Based on the measured electricity usage of the entire building, the
lighting and plug load densities and operating schedules and the
HVAC system were refined with the initial model.
0
500
1000
1500
2000
2500
3000
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
Time-of-useelectricityconsumption/(kWh)
Off-Peak Mid-Peak On-Peak
Fig. 5. Time-of-use entire building electricity usage in April.
3. Energy analysis
3.1. Energy consumption analysis of the window curtain wall
The building loads from windows are composed of the loads
from window conduction and solar radiation through the windows.
During the cooling season, the cooling load from solar radiation
through the windows accounts for the majority of the total build-
ing cooling load compared with the cooling load from window
conduction. During the heating season, the heating load from win-
dow conduction is much higher than the cooling load from solar
radiation through the windows, even though the cooling load from
solar radiation could offset part of the total building heating load.
To better understand the effect of solar control window films, we
conducted a detailed analysis on window conduction and solar
radiation through the windows, with and without window films.
Tables 3 and 4 present the detailed comparison results of the
building cooling and heating load for different types of glazing sys-
tem with/without window films. It can be seen that the effects
of the window films on the thermal performance of the glazing
system are different for glazing systems with outside and inside
window films. On summer design day, the cooling load from win-
dow conduction with type A-1 increased 113% compared to that
of the original glazing system type A, while no obvious difference
was observed for type A-2 with window films outside the origi-
nal glazing system. For type A-1, the solar absorption of the inner
surface increased to 0.296, from 0.058, after sticking window film
onto the inside window of the original glazing system. This led to
an increase in the inner surface temperature and cooling load from
window conduction. Moreover, the cooling load from solar radia-
tion through the windows was reduced by 56% and 44% for type A-1
and A-2, respectively, due to the decrease in solar transmittance.
For the building heating load from windows, there was no signifi-
cant difference between the heating load from window conduction
for type A-1 and A-2, while the cooling load from solar radiation
decreased by 56% and 43% for type A-1 and A-2, respectively, on
heating design day. The building cooling load from solar radiation
on winter design day was much lower than that of summer design
day and accounted for only 20% of the total building heat load from
windows.
Fig. 6 illustrates the simulation results of the building cooling
load for the proposed glazing system types with/without window
films. For glazing system type A-1, the total building cooling load
decreased slightly compared to the original glazing system type
A. The reason for no obvious effect of the window film inside the
glazing system is that the increased cooling load from window
conduction offset the effect and potential for the window films to
decrease the cooling load from solar radiation through the win-
dows. For glazing system type A-2, even though the outside window
film increased the solar absorptance of the outer window surface,
there was no obvious change in the building cooling load from win-
dow conduction due to the existence of an air layer in the glazing
system. Meanwhile, the building cooling load from solar radiation
through the windows decreased by 44% compared to the original
glazing system type A. Therefore, the simulation results for glazing
5. 136 R. Yin et al. / Energy and Buildings 45 (2012) 132–140
Table 3
Building cooling load from windows (window area: 6141 m2
).
Cooling load Total building cooling load from all windows Average building cooling load from all windows
Peak load Conduction (kW) Solar radiation (kW) Conduction (W/m2
) Solar radiation (W/m2
)
Design day Annual Design day Annual Design day Annual Design day Annual
A 175.08 190.92 375.22 293.30 28.51 31.09 61.10 47.76
A-1 373.25 348.91 164.69 131.25 60.78 56.81 26.82 21.37
A-2 187.02 207.30 211.68 169.10 30.45 33.76 34.47 27.54
Table 4
Building heating load from windows (window area: 6141 m2
).
Heating load Total building heating load from all windows Average building heating load from all windows
Peak load Conduction (kW) Solar radiation (kW) Conduction (W/m2
) Solar radiation (W/m2
)
Design day Annual Design day Annual Design day Annual Design day Annual
A −253.55 −258.22 122.32 164.25 −41.29 −42.05 19.92 26.75
A-1 −246.51 −249.64 53.64 69.99 −40.14 −40.65 8.73 11.40
A-2 −252.70 −256.40 69.03 113.77 −41.15 −41.75 11.24 18.53
0
100
200
300
400
500
600
A A-1 A-2
Buildingcoolingloadfromwindows/
(kW)
Load from window conduction Load from solar radiation through windows
Fig. 6. Building cooling loads from windows on summer design day.
system type A-2, with window films outside, show a wide energy
saving potential.
3.2. Cooling load analysis on design day
Figs. 7 and 8 show the building cooling load breakdown for the
original glazing system type A and the comparison of simulation
results between different glazing system types with/without win-
dow films. Notice that the cooling load from the windows account
for 66% of the total building cooling load, and the cooling load
from window conduction and solar radiation through the windows
Fig. 7. Building cooling load breakdown for original glazing system Type A.
accounted for 44% and 20%, separately. The effects of the window
film on the solar radiation through the windows have been demon-
strated in the previous section. As shown in Fig. 8, the glazing
system type A-2, with a window film outside, could reduce solar
radiation through the windows by 44%, with little influence on the
cooling load from window conduction.
3.3. Whole building energy usage
Due to the hot summer and cold winter climate in the study
area, the total building energy consumption needs to be studied to
evaluate the effects of window films on window curtain walls. By
sticking the window film onto the original glazing system, the solar
heat gain coefficient (SHGC) of the glazing system was reduced by
15–30%. This led to a reduction in the heat gain from solar radia-
tion through the windows. On the one hand, the building cooling
loads during the cooling season are reduced significantly due to
the deep reduction in the cooling load from solar radiation through
the windows. On the other hand, the building would benefit less
from the solar radiation through the windows. By comparing the
energy consumption and cost of calibrated building simulation
models with/without window films, the effects of the window film
on reducing the energy consumption for the entire building can be
better understood.
175.08
373.25
187.02
375.22
164.69
211.68
0
100
200
300
400
500
600
700
800
900
2-A1-AA
Wall and roof Window conduction
Solar radiation through windows Infiltration
Occupancy Lighting
Plug
Buildingsensiblecoolingload/(kW)
Fig. 8. Building cooling load breakdown for all proposed glazing system types.
6. R. Yin et al. / Energy and Buildings 45 (2012) 132–140 137
0
50000
100000
150000
200000
250000
12 1 2 6 7 8 9
Electricityconsumption/(kWh)
Month
A
A-1
A-2
Fig. 9. Monthly whole building electricity usage for proposed glazing systems (heat-
ing & cooling seasons).
3.3.1. Electricity consumption
Fig. 9 shows the simulated monthly electricity usage of whole
building for all types of glazing systems, with and without window
films. Compared to the original glazing system type A, the electric-
ity usage for type A-1 and A-2 did not change significantly during
the heating season. In addition, the electricity usage for type A-1
and A-2 decreased by 2.0% and 8%, respectively, during the cooling
season. For type A-2, with window films outside the glazing sys-
tem, electricity usage of whole building decreased by 7.3–8% from
July to September, and the total electricity savings throughout the
cooling season was 37,191 kWh.
3.3.2. Energy cost
Table 5 presents the 2009 utility rates of electricity and natural
gas in Shanghai. The utility rate for natural gas is a uniform rate
by per cubic meter, and the utility rate for electricity includes a
time-of-use energy charge and monthly peak demand charge.
Fig. 10 shows the simulated monthly energy cost of all simula-
tion models with different glazing systems. We can see that there is
no significant change in the energy cost during the heating season,
and the maximum reduction in the monthly energy cost during the
cooling season reached 8.0% in September. In addition, the monthly
peak demand charge was reduced significantly due to a decrease
in the monthly peak demand of the whole building.
Table 6 presents detailed results of the monthly energy cost
for the simulation models. Compared to the original glazing sys-
tem type A, the electricity cost for type A-1 and A-2 increased
by 0.6–2.0% during the heating season. For type A-1 and type A-
2, the electricity cost during the cooling season was reduced by
2.1–2.2% and 7.3–8.0%, separately. Significant cost savings could
-
5,000
10,000
15,000
20,000
25,000
30,000
35,000
12 1 2 6 7 8 9
Electricitycost/($)
Month
A
A-1
A-2
Fig. 10. Monthly simulated energy cost for models with different glazing system.
be observed for the simulation model with glazing system type A-
1. The average energy cost saving was $2044, and the total energy
cost saving throughout the cooling season was $6274. Compared to
glass type A-2, the effect of the window films on reducing electricity
consumption and peak demand is more obvious.
3.3.3. Optimization of energy conservation measures with
window films
The building had a window-to-wall ratio of 90%, with 1–3 sto-
ries. With respect to the heat gain from solar radiation through
the windows, the average solar radiation of the northern windows
was the lowest compared to other orientations. For the north-
ern glass curtain wall, the potential for utilizing window films for
solar radiation reduction was not as obvious. The average solar
radiation for the northeastern windows was also lower in the morn-
ing. Therefore, we proposed two optimization models for utilizing
window films to improve the energy efficiency and economic ben-
efits. The first optimal model (A-2-1) was to stick window films
onto the glass curtain walls, except for the northern orientation;
and the second model (A-2-2) was to stick window films onto
the glass curtain walls, except for the northern and northeastern
orientations.
Table 7 presents the monthly simulation results for the elec-
tricity cost of the optimized simulation models with window films.
For the optimized simulation model A-2-1, the average monthly
cost savings throughout the cooling season was $1435, which is
higher than that of simulation model A-2 by $335. For the opti-
mized simulation model A-2-2, the average monthly cost savings
throughout the cooling season was $1130, which is higher than
that of simulation model A-2 by $276. By comparing optimal model
A-2-1 with optimal model A-2-2, the northern glass curtain wall
without window films accounted for 34.5% of the total window
area of the whole building; while the northern and northeast-
ern glass curtain wall without window films accounted for 48%
of the total window area. By sticking window films onto other
windows, both the energy savings and economic benefits could be
improved.
3.4. Further analysis and discussion
To study the impact of sticking solar window films onto the
double-clear glazing system, the research team also created sce-
nario series B and conducted simulation and analysis. As shown
in Fig. 11, a “virtual” double-clear glazing system was proposed to
study the effect of solar window films for reducing the cooling load
through such windows. Tables 8 and 9 present the detailed thermal
and optical properties of the “virtual” double-clear glazing system
with/without window films. It can be seen that the U-value of glaz-
ing system types B-1 and B-2 decreased slightly compared to the
double-clear glazing system without window films. Compared to
the double-clear glazing system, both the shading coefficient and
solar heat gain coefficient for type B-1 were reduced by 22%. In
addition, the relative heat gain decreased by 21%. The shading coef-
ficient and solar heat gain coefficient for type B-2 were reduced
by 46%, and the relative heat gain decreased by 44%. For glazing
systems type B-1 and B-2, the visible transmittance decreased by
approximately 50% after sticking window films onto the “virtual”
double-clear glazing system (Table 9).
For type B-1, on summer design day, the total building cooling
load from the windows decreased by 17.2–17.6%, and the building
cooling load from transmitted solar radiation through the win-
dows decreased by 58.0–58.8%; for type B-2, on summer design
day, the total building cooling load from the windows decreased
by 38.0–39.3%, and the building cooling load from transmitted solar
radiation through the windows decreased by 58.0–58.4%. By com-
paring the calculated results for type B-1 and B-2, we found that the
7. 138 R. Yin et al. / Energy and Buildings 45 (2012) 132–140
Table 5
2009 utility rates of electricity and natural gas in Shanghai.
Energy source On-peak Mid-peak Off-peak Demand charge ($/kW Month)
Electricity ($/kWh) 8:00–11:00 18:00–21:00 6:00–8:00 11:00–18:00 21:00–22:00 22:00–06:00
0.158 0.099 0.046 5.735
Natural gas ($/m3
) 0.368
Table 6
Comparison of energy cost between base model and models with window films.
Monthly electricity cost ($) 12 1 2 6 7 8 9
Monthly time-of use
electricity cost ($)
A 16,674 18,955 16,095 10,491 25,382 24,102 18,409
A-1 16,927 19,213 16,228 10,404 24,797 23,507 18,018
A-2 17,281 19,494 16,375 10,203 23,526 22,208 16,978
Monthly peak
demand (kW)
A 681.20 667.30 678.00 680.90 713.40 644.40 654.30
A-1 677.70 664.80 674.60 674.00 702.80 636.90 642.70
A-2 646.20 638.20 648.60 628.30 660.30 593.20 592.90
Demand charge ($) A 3907 3827 3889 3905 4092 3696 3753
A-1 3887 3813 3869 3866 4031 3653 3686
A-2 3706 3660 3720 3604 3787 3402 3400
Monthly electricity
cost ($)
A 20,581 22,782 19,984 14,396 29,474 27,798 22,161
A-1 20,813 23,026 20,096 14,269 28,828 27,160 21,704
A-2 20,987 23,154 20,095 13,806 27,313 25,610 20,379
Electricity cost
savings ($)
A – – – – – – –
A-1 −233 −243 −113 127 646 638 457
−1.1% −1.1% −0.6% 0.9% 2.2% 2.3% 2.1%
A-2 −406 −372 −111 590 2161 2188 1783
−2.0% −1.6% −0.6% 4.1% 7.3% 7.9% 8.0%
Note: Cost savings = electricity cost of simulation model with original glazing system ($) − electricity cost of simulation model with glazing system with window film ($).
Table 7
Electricity cost of the whole building with the ECM of window film.
Monthly electricity cost 12 1 2 6 7 8 9
Monthly time-of use
electricity cost ($)
A 16,674 18,955 16,095 10,491 25,382 24,102 18,409
A-2 17,281 19,494 16,375 10,203 23,526 22,208 16,978
A-2-1 17,220 19,439 16,337 10,297 24,104 22,765 17,393
A-2-2 17,124 19,354 16,280 10,328 24,391 23,053 17,592
Monthly peak
demand (kW)
A 681.20 667.30 678.00 680.90 713.40 644.40 654.30
A-2 646.20 638.20 648.60 628.30 660.30 593.20 592.90
A-2-1 662.40 653.10 664.70 643.30 675.80 609.20 609.50
A-2-2 666.60 655.50 668.30 649.80 684.20 615.80 619.30
Demand charge ($) A 3907 3827 3889 3905 4092 3696 3753
A-2 3706 3660 3720 3604 3787 3402 3400
A-2-1 3799 3746 3812 3690 3876 3494 3496
A-2-2 3823 3760 3833 3727 3924 3532 3552
Monthly electricity
cost ($)
A 20,581 22,782 19,984 14,396 29,474 27,798 22,161
A-2 20,987 23,154 20,095 13,806 27,313 25,610 20,379
A-2-1 21,019 23,185 20,149 13,986 27,980 26,259 20,889
A-2-2 20,948 23,113 20,113 14,055 28,315 26,585 21,144
Electricity cost
savings ($)
A – – – – – – –
A-2-1 −438 −403 −166 410 1494 1540 1272
−2.1% −1.8% −0.8% 2.8% 4.9% 5.3% 5.5%
A-2-2 −367 −331 −129 342 1159 1213 1018
−1.8% −1.5% −0.6% 2.3% 3.8% 4.2% 4.4%
Note: Cost savings = electricity cost of simulation model with original glazing system ($) − electricity cost of simulation model with glazing system with window film ($).
Table 8
Thermal and optical properties of glazing systems (double-clear) with/without window films.
Glazing system type K (W/m2
K) SC SHGC Relative heat gain (W/m2
) Visible transmittance
B 2.670 0.818 0.712 538 0.794
B-1 2.623 0.641 0.557 426 0.399
B-2 2.667 0.443 0.385 301 0.399
Table 9
Other optical properties of glazing systems (double clear) with/without window films.
Glazing system type K (W/m2
K) SC SHGC Relative heat gain (W/m2
) Visible transmittance
B 2.670 0.818 0.712 538 0.794
B-1 2.623 0.641 0.557 426 0.399
B-2 2.667 0.443 0.385 301 0.399
8. R. Yin et al. / Energy and Buildings 45 (2012) 132–140 139
Fig. 11. Glazing systems (double-clear) with and without window films.
Table 10
Building cooling load from “virtual” windows (window area: 6141 m2
).
Cooling load Total building cooling load from all windows Average building cooling load from all windows
Peak load Conduction (kW) Solar radiation (kW) Conduction (W/m2
) Solar radiation (W/m2
)
Design day Annual Design day Annual Design day Annual Design day Annual
B 235.47 255.42 471.40 368.64 38.34 41.59 76.76 60.03
B-1 194.26 211.49 194.22 151.88 31.63 34.44 31.62 24.73
B-2 142.93 157.85 196.10 153.35 23.27 25.70 31.93 24.97
effect of window films on reducing transmitted solar energy is obvi-
ous and similar. This is due to the same effect as utilizing window
films on the solar transmittance of the glazing system. However,
for type B-1 with window film inside of the glazing system, no
significant reduction in the total building cooling load from win-
dows was seen. The main reason for this is the increased cooling
load from window conduction, which offset the potential effects of
the window film on reducing the building cooling load from solar
radiation through the windows. For the glazing system type B-2,
although the outside window film increased the solar absorptance
of the outer window surface, no obvious difference occurred for
the building cooling load from window conduction due to the exis-
tence of an air layer in the glazing system (Figs. 12 and 13 and
Table 10).
Wall and roof
7%
Window
conduction
23%
Solar radiation
through windows
47%
Infiltration
2%
Occupancy
3%
Lighting
14%
Plug
4%
B
Fig. 12. Building cooling load breakdown for virtual glazing system Type B.
235.47 194.26 142.93
471.40
194.22
196.10
0
200
400
600
800
1000
1200
2-B1-BB
Buildingsensiblecoolingload/(kW)
Wall and roof Window conduction
Solar radiation through windows Infiltration
Occupancy Lighting
Plug
Fig. 13. Building cooling load breakdown for virtual glazing system Type B.
4. Conclusions
Based on the original glazing system of the building, the effects
of sticking window films onto the glazing system are different
between the outer and inner window film types. Through analyzing
the thermal and optical performance of different glazing systems
with window films, the glazing system type A-2, with window films
outside, is found to be more effective for reducing the SHGC and SC
of the original glazing system. In addition, the window films could
improve indoor comfort by reducing UV transmittance to 0.001.
Building cooling loads from solar radiation through the win-
dows decreased by 56% and 44% for type A-1 and A-2, respectively,
due to the reduction in solar transmittance. Though the reduction in
heat gain from solar radiation could increase the building heat load,
the magnitude of the increased building heat load is much lower
9. 140 R. Yin et al. / Energy and Buildings 45 (2012) 132–140
than the reduction of the building cooling load by utilizing window
films in the Shanghai climate zone. For the original glazing system
in the auto museum, there is no obvious effect for reducing annual
electricity consumption of the HVAC system by sticking window
films onto the inside of the glazing system. However, sticking win-
dow films onto the outside of the glazing system could reduce the
annual electricity consumption of the HVAC system significantly.
Through the detailed analysis of the total building energy con-
sumption, the effect of sticking window films onto the inside of the
original glazing system is not obvious. The reason for no obvious
effect is that the increased cooling load from window conduction
offsets the potential for the window film to decrease the cooling
load from solar radiation through the windows.
Compared to the energy performance by sticking the window
film onto the inside of the original glazing system, the window film
performs better in the “virtual” double-clear glazing system. The
existence of the low-E film in the original glazing system type A
plays a key role in the observed differences between glazing system
A-1 and B-2. The heat gain from solar radiation is blocked between
layers of low-E and window film, which decreases the effect of the
window film on reducing the solar radiation heat gain through the
windows, as shown in the “virtual” double-clear glazing system.
Simulation results indicate that utilizing window films could
reduce the time-of-use electricity consumption and monthly peak
demand. For glazing system type A-2, the average electricity cost
savings during the cooling season could be reduced by 7.3–8.0%,
which is approximately $2044 per month. With respect to the heat
gain from solar radiation through the window, the average solar
radiation of the northern windows is the lowest compared to other
orientations, as well as the northeastern windows in the morning.
We propose sticking window films onto some of the windows of the
building, and then both the energy savings and economic benefits
could be improved. If the area of window films is reduced by 34.5%
and 48% for the northern and northeastern glass curtain walls, the
average electricity cost savings during the cooling season could be
reduced by $1435 and $1130, respectively.
Though window films could reduce the annual electricity con-
sumption and monthly peak demand, the effect on day lighting
by utilizing windows will decrease due to the reduction of visible
transmittance. For this building, there will be no significant influ-
ence on the effect of day lighting because this building has a high
window-to-wall ratio of 90%. Future work should emphasize the
performance of indoor illumination levels and total building energy
consumption.
Acknowledgement
The author wants to thank Shanghai Auto Museum for the sup-
port of this research.
References
[1] T. Fengxiang, Energy-saving Glazing System (Proceedings), China Architecture
and Building Press, Beijing, 2003, pp. 7–30, 133–146.
[2] Building Energy Research Center of Tsinghua University, Annual Report on
China Building Energy Efficiency, China Building Industry Press, Beijing, 2007.
[3] MOF, MOHURD, Notice on further development to heat metering and energy
efficiency retrofit for existing residential buildings in northern heating
regions of China (document of Department of Economic Development of
MOF(2011)12th).
[4] J. Zhao, Y. Wu, N. Zhu, Check and evaluation system on heat metering and energy
efficiency retrofit of existing residential buildings in northern heating areas of
China based on multi-index comprehensive evaluation method, Energy Policy
37 (2009) 2124–2130.
[5] J. Zhao, N. Zhu, Y. Wu, Technology line and case analysis of heat metering and
energy efficiency retrofit of existing residential buildings in Northern heating
areas of China, Energy Policy 37 (2009) 2106–2112.
[6] S.Z. Wang, M. Guan, Windows—the key of building energy efficiency, Construc-
tion Glass and Glass Industry 4 (2005) 3–8.
[7] M.D. Rubin, Calculating of heat transfer through windows, Energy Research 6
(1982) 341–349.
[8] M.D. Rubin, Solar optical properties of windows, Energy Research 6 (1982)
123–133.
[9] ASHRAE Fundamentals Handbook, American Society of Heating Refrigerating
and Air-conditioning Engineers, 2001 (Chapter 30: Fenestration).
[10] H.F. Castleton, V. Stovin, S.B.M. Beck, J.B. Davison, Green roofs: building
energy savings and the potential for retrofit, Energy and Buildings 42 (2010)
1582–1591.
[11] L. Zhang, Q.L. Meng, B.Q. Zhang, Dynamic testing on total thermal resistance
and shading coefficient of glazing system, 2003, Building Energy Efficiency (6)
(2003) 57–60.
[12] Z.L. Chen, Q.L. Meng, L.H. Zhao, Experiment and analysis on thermal
performance of building glazing system, Building Materials (3) (2005)
8–11.
[13] L. Wei, J.P. He, L.P. Yan, Energy consumption analysis and energy saving analysis
on glazing system in Eastern China, Journal of Nanjing University of Technology
24 (4) (2002) 70–73.
[14] J.P. He, Y.F. Gong, Z.L. Ziang, The simulation analysis of energy effi-
ciency of glazing system in Eastern China, Energy Efficiency (10) (1997)
8–11.
[15] Z.W. Pu, H.W. Mao, H. Yang, The impact of glazing system on the load
of HVAC and energy consumption of building, HV&AC 35 (8) (2005)
119–121.
[16] Y. Yang, H.F. Di, The research on the energy efficiency of glazing system
with low radiation rate: 2001, Acta Energiae Solaris Sinica 22 (3) (2001)
296–301.
[17] F. Noh-Pat, J. Xamán, G. Álvarez, Y. Chávez, J. Arce, Thermal analysis for a double
glazing unit with and without a solar control film (SnS–CuxS) for using in hot
climates, Energy and Buildings 43 (February (2–3)) (2010) 704–712.
[18] D.H.W. Li, T.N.T. Lam, S.L. Wong, E.K.W. Tsang, Lighting and cooling energy
consumption in an open-plan office using solar film coating, Energy 33 (8)
(2008) 1288–1297.
[19] D.H.W. Li, J.C. Lam, C.C.S. Lau, T.W. Huan, Lighting and energy performance of
solar film coating in air-conditioned cellular offices, Renewable Energy 29 (6)
(2004) 921–937.
[20] Y. Pan, R. Yin, Z. Huang, Energy modeling of two office buildings with data center
for green building design, Energy and Buildings 40 (7) (2008) 1145–1152.
[21] R. Yin, P. Xu, M.A. Piette, S. Kiliccote, Study on Auto-DR and pre-cooling of
commercial buildings with thermal mass in California, Energy and Buildings
42 (7) (2010) 967–975.
[22] N.H. Wong, D.K.W. Cheong, H. Yan, J. Soh, C.L. Ong, A. Sia, The effects of rooftop
garden on energy consumption of a commercial building in Singapore, Energy
and Buildings 35 (4) (2003) 353–364.
[23] Y. Pan, Z. Huang, G. Wu, Calibrated building energy simulation and its applica-
tion in a high-rise commercial building in Shanghai, Energy and Buildings 39
(6) (2007) 651–657.
[24] ASHRAE Guideline 14, Measurement of Energy and Demand Savings, 2002,
ASHRAE Standards Committee.
[25] L.K. Norford, R.H. Socolow, E.S. Hsieh, G.V. Spadaro, Two-to-one discrepancy
between measured and predicted performance of a ‘low-energy’ office build-
ing: insights from a reconciliation based on the DOE-2 model, Energy and
Buildings 21 (2) (1994) 121–131.
[26] P. Raftery, M. Keane, J. O’Donnell, Calibrating whole building energy models: an
evidence-based methodology, Energy and Buildings 43 (9) (2011) 2356–2364.