The document outlines the configuration of IP addresses on multiple routers, servers and sub-interfaces. It assigns IP addresses in the 10.23.1.x, 12.23.1.x, 172.16.23.x, 192.168.23.x and 11.16.23.x ranges to interfaces on two routers and five servers to set up the network topology in Cisco Packet Tracer.

1. Klik,ataupilih Router ..
Pilih fastEthernet0/0

2. Masukan IP Address (10.23.1.1)
Masukan IP Address 0/1 ( 12.23.1.1)

3. Masukan IP Address Ke 0/0/0 ( 172.16.23.1)
Masukan IP Address 0/1/0 (192.168.23.1)

4. MasukKe Server 0.
Pilih IP Configuration

5. IP Address; (12.23.1.2)
Klik Server 1 .

6. Pilih IP Configuration
IP Address (172.16.23.2)

7. Pilih Server 2

8. Pilih IP configuration

9. IP Address; (192.168.23.2)
Pilih Router B

10. PilihfastEhernet 0/0

11. IP Address (10.23.1.2)
FastEthernet 0/1 IP Address ( 11.16.23.1 )

12. Pilih Ethernet 0/0/0 IP Address (173.16.23.1)

13. Pilih Ethernet IP Address (193.168.23.1 )
Klik Server 3..

14. Pilih IP Configuration
IP Address ( 11.16.23.2 )

15. Klik Server 4
Pilihg IP configuration

16. IP Address (173.16.23.2 )

17. Klik Server 5
Pilih IP Configuration

18. Masukan IP Address ( 193.168.23.2 )

19. Pilih Command Prompt

22. Pilih Web Browser
Yainilahtampilan Web cisco packet Tracer