The document discusses vibration monitoring and condition monitoring systems from ifm electronic. It provides information on different types of vibration sensors, switches, transmitters and diagnostic electronics that ifm offers for monitoring machine health. The systems allow early detection of issues through vibration analysis to optimize maintenance, increase machine uptime and reduce unexpected downtime.
The One Series Safety Transmitter is a transmitter-switch for monitoring pressure or temperature and meets the requirements of SIL 2 for random integrity at HFT = 0, SIL 3 for random integrity at HFT = 1 and SIL 3 for systematic capability. The One Series Safety Transmitter incorporates UE’s patented IAW self diagnostics, redundant and diverse signal processing and software algorithms to detect abnormalities in the process and internal faults. The design is based on a powerful microprocessor that provides an extremely fast response time for emergency shutdown situations.
One Series Safety Transmitter - Pressure and Temperature Transmitter-SwitchMiller Energy, Inc.
The One Series Safety Transmitter simplifies installation, improves productivity, and eliminates nuisance trips. Sensor diagnostics with redundant data processing detect open, shorted, and plugged sensing elements.
The ILT-6000 contains a low profile waveguide that is inserted into a waveguide sleeve isolation well and float assembly. The waveguide sleeve isolates the internal waveguide from the process environment and protects it from excessive process conditions. This provides an additional safety barrier for the operator. The major benefit is the transmitter and waveguide can be removed for field checking without interruption or exposure to the process environment
The retractable housings are intended solely for measurement tasks in conjunction with the specified METTLER TOLEDO electrodes/sensors, namely pH and redox (ORP) combined electrodes as well as dissolved oxygen (DO) or conductivity sensors.
The One Series Safety Transmitter is a transmitter-switch for monitoring pressure or temperature and meets the requirements of SIL 2 for random integrity at HFT = 0, SIL 3 for random integrity at HFT = 1 and SIL 3 for systematic capability. The One Series Safety Transmitter incorporates UE’s patented IAW self diagnostics, redundant and diverse signal processing and software algorithms to detect abnormalities in the process and internal faults. The design is based on a powerful microprocessor that provides an extremely fast response time for emergency shutdown situations.
One Series Safety Transmitter - Pressure and Temperature Transmitter-SwitchMiller Energy, Inc.
The One Series Safety Transmitter simplifies installation, improves productivity, and eliminates nuisance trips. Sensor diagnostics with redundant data processing detect open, shorted, and plugged sensing elements.
The ILT-6000 contains a low profile waveguide that is inserted into a waveguide sleeve isolation well and float assembly. The waveguide sleeve isolates the internal waveguide from the process environment and protects it from excessive process conditions. This provides an additional safety barrier for the operator. The major benefit is the transmitter and waveguide can be removed for field checking without interruption or exposure to the process environment
The retractable housings are intended solely for measurement tasks in conjunction with the specified METTLER TOLEDO electrodes/sensors, namely pH and redox (ORP) combined electrodes as well as dissolved oxygen (DO) or conductivity sensors.
Latest update of our torque control system and related products for precision bolt tightening with traceability and monitoring functions #torque #precision #traceability #monitoring #products #controlsystem #latest #bolt #update #functions #related
An innovated torque control system that provides excellent control accuracy over traditional impact wrenches and improves accuracy and stability on any type of pulse wrench on the market today including data logging for production record traceability
EasyClean400 is versatile in its application. It offers multiple control possibilities and can be programmed extensively. Furthermore, a version for applications in explosion hazardous areas is available. The integration into a distributed control system (DCS) can be easily realized in a conventional way or via a Profibus® PA.
This ZIPPTORK Torque Control System takes advantage of its combined patented control device, control algorithm, and wireless rotary torque transducer, with the best practice on IoT (Network of physical devices), making the controllability and traceability of fastener assembly, fastening processes, and fastening records possible and accessible. Making any targeted tightening torque more affordable and reliable using any air driven continuous & discontinuous torque tools
ZIPP Assembly Technology presents fastening solutions for the industrial assembly market in bolting threaded fasteners, squeezing solid rivets, riveting blind rivets and rivet nuts, and fastening lock bolts, etc.
This system takes advantage of our combined patented control device, control algorithm, and wireless rotary torque transducer, with the best practice on IoT (Network of physical devices), making the controllability and traceability of fastener assembly, fastening processes, and fastening records possible and accessible. Presenting the world's first wireless torque transducer which is impact/shock approved, and can be used in wide range of torque tool for torque data collection.
Series One Safety Transmitter, Pressure and Temperature SwitchIves Equipment
The One Series Safety Transmitter is a transmitter-switch for monitoring pressure or temperature and meets the requirements of SIL 2 for random integrity at HFT = 0, SIL 3 for random integrity at HFT = 1 and SIL 3 for systematic capability. The One Series Safety Transmitter incorporates UE’s patented IAW self diagnostics, redundant and diverse signal processing and software algorithms to detect abnormalities in the process and internal faults. The design is based on a powerful microprocessor that provides an extremely fast response time for emergency shutdown situations.
Siemens ,
Catalog Thiết Bị Điện Siemens , Catalog Thiết Tự Động
Catalog Phụ Kiện Siemens , Catalog Phụ Kiện,
Catalog Siemens , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Siemens vui lòng gọi: 0907.764.966
Конференция «Кластерный подход и крупные инвестпроекты в развитии мегаполисов»
Жером Пьегэ, директор ERAI RUSSIA— Entreprise Rhône-Alpes International (французский опыт)
Latest update of our torque control system and related products for precision bolt tightening with traceability and monitoring functions #torque #precision #traceability #monitoring #products #controlsystem #latest #bolt #update #functions #related
An innovated torque control system that provides excellent control accuracy over traditional impact wrenches and improves accuracy and stability on any type of pulse wrench on the market today including data logging for production record traceability
EasyClean400 is versatile in its application. It offers multiple control possibilities and can be programmed extensively. Furthermore, a version for applications in explosion hazardous areas is available. The integration into a distributed control system (DCS) can be easily realized in a conventional way or via a Profibus® PA.
This ZIPPTORK Torque Control System takes advantage of its combined patented control device, control algorithm, and wireless rotary torque transducer, with the best practice on IoT (Network of physical devices), making the controllability and traceability of fastener assembly, fastening processes, and fastening records possible and accessible. Making any targeted tightening torque more affordable and reliable using any air driven continuous & discontinuous torque tools
ZIPP Assembly Technology presents fastening solutions for the industrial assembly market in bolting threaded fasteners, squeezing solid rivets, riveting blind rivets and rivet nuts, and fastening lock bolts, etc.
This system takes advantage of our combined patented control device, control algorithm, and wireless rotary torque transducer, with the best practice on IoT (Network of physical devices), making the controllability and traceability of fastener assembly, fastening processes, and fastening records possible and accessible. Presenting the world's first wireless torque transducer which is impact/shock approved, and can be used in wide range of torque tool for torque data collection.
Series One Safety Transmitter, Pressure and Temperature SwitchIves Equipment
The One Series Safety Transmitter is a transmitter-switch for monitoring pressure or temperature and meets the requirements of SIL 2 for random integrity at HFT = 0, SIL 3 for random integrity at HFT = 1 and SIL 3 for systematic capability. The One Series Safety Transmitter incorporates UE’s patented IAW self diagnostics, redundant and diverse signal processing and software algorithms to detect abnormalities in the process and internal faults. The design is based on a powerful microprocessor that provides an extremely fast response time for emergency shutdown situations.
Siemens ,
Catalog Thiết Bị Điện Siemens , Catalog Thiết Tự Động
Catalog Phụ Kiện Siemens , Catalog Phụ Kiện,
Catalog Siemens , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Siemens vui lòng gọi: 0907.764.966
Конференция «Кластерный подход и крупные инвестпроекты в развитии мегаполисов»
Жером Пьегэ, директор ERAI RUSSIA— Entreprise Rhône-Alpes International (французский опыт)
Soy Médico General Cirujano soy Deportista y Atlético soy Alto mido 1,85 metros, Rubio, de Piel Blanca, ojos claros, cabellos Rubios castaño, Inteligente y de Buenos Sentimientos. Sé el Idioma Alemán, Inglés-Inglesa, Americana; también conozco y tengo caracteres de la Filosofía de la Cultura China las Artes Marciales, Yoga, Meditación, Budismo.
Soy Atlético Simpático, me esmero a seguir Adelante solucionando los Problemas de las demás Personas para salvar su Vida con Salud Pura y Verdadera y evitar las Enfermedades. SALVAR VIDAS ES MI DEBER Y AYUDAR.
La VIDA es una VIRTUD que cada Humano, Persona tiene es Valeroso y Digno lograr SALVAR la VIDA de una Persona que está en Peligro, cada Persona es una sola Unidad único no hay nadie como esa persona somos distintos.
La NATURALEZA es Bella y Linda Vivirla al Aire Libre, con Agua, la Vegetación, los Bellos Animales en el Ecosistema la Biodiversidad hay que Valorar y Gozar lo que hay en el Mundo Vivirla y Disfrutarla.
El Amor es lo Más Importante en la Vida para estar Felices y Vivirla Plenamente, Disfrutarla con Emoción y Alegría con todas las Cosas Bellas que Existen en el Mundo y en cada País de nuestras Ciudades, Naturaleza, Bosques y todo lo Bello.
ME GUSTA LO QUE SOY MI FORMA DE SER ME ENCANTA LO QUE SOY YÓ MI FÍSICO, MENTE, PENSAMIENTOS, ALMA Y CUERPO, FÍSICO. Y VIVIR LA VIDA, NATURALEZA LA BELLEZA
MÉDICO GENERAL: ÁLVARO MIGUEL CARRANZA MONTALVO
SUCRE-BOLIVIA-CHUQUISACA
FACEBOOK, YOU TUBE, TWISTER, MY SPACE, REDES SOCIALES INTERNET
Экономическая стратегия развития города Новосибирска: перспективные направлен...BDA
Экономическая стратегия развития города Новосибирска: перспективные направления, роль и место кластерного подхода
Молчанова Ольга Витальевна, начальник департамента экономики, стратегического планирования и инвестиционной политики мэрии города Новосибирска
Valstat real-time static charge monitoring system continually measures, displays, and records surface voltage on charged moving objects. It is an extremely useful safety and preventive maintenance device that finds use in many industrial applications. Click here to read more about this system.
Are you looking for the best vibration measurement sensors in the market for measuring velocity, acceleration, etc. Get in touch with our sales team today.
https://centumcontrols.com/vibration-monitoring/
Condition Monitoring of DC Motor using Artificial Intelligence Techniqueijsrd.com
The complexity of most steel industry always tends to create a problem in monitoring and supervision system. Prompt fault detection and diagnosis is a best way to handle and tackle this problem. Dc motor plays a very vital role in steel industry and there is a strong demand for their reliable and safe operation. The history of fault diagnosis and protection of electrical machines is as old as such machines themselves. However, nowadays, condition monitoring of electrical machines has become increasingly essential. It plays a very important role in their safe operation and helps to avoid heavy production losses in industry. The conditioning monitoring and fault-detection techniques of electrical machines have moved in recent years into artificial intelligence techniques. When an artificial intelligence technique is used, fault detection and evaluation can be accomplished without an expert. In this paper, artificial intelligence (AI) techniques are used to build a condition monitoring system that has incremental learning capabilities. The condition-monitoring of dc motor using AI technique schemes have concentrated on sensing specific failure modes in field windings.
What are the main advantages of using HR recruiter services.pdfHumanResourceDimensi1
HR recruiter services offer top talents to companies according to their specific needs. They handle all recruitment tasks from job posting to onboarding and help companies concentrate on their business growth. With their expertise and years of experience, they streamline the hiring process and save time and resources for the company.
Explore our most comprehensive guide on lookback analysis at SafePaaS, covering access governance and how it can transform modern ERP audits. Browse now!
Attending a job Interview for B1 and B2 Englsih learnersErika906060
It is a sample of an interview for a business english class for pre-intermediate and intermediate english students with emphasis on the speking ability.
[Note: This is a partial preview. To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
Sustainability has become an increasingly critical topic as the world recognizes the need to protect our planet and its resources for future generations. Sustainability means meeting our current needs without compromising the ability of future generations to meet theirs. It involves long-term planning and consideration of the consequences of our actions. The goal is to create strategies that ensure the long-term viability of People, Planet, and Profit.
Leading companies such as Nike, Toyota, and Siemens are prioritizing sustainable innovation in their business models, setting an example for others to follow. In this Sustainability training presentation, you will learn key concepts, principles, and practices of sustainability applicable across industries. This training aims to create awareness and educate employees, senior executives, consultants, and other key stakeholders, including investors, policymakers, and supply chain partners, on the importance and implementation of sustainability.
LEARNING OBJECTIVES
1. Develop a comprehensive understanding of the fundamental principles and concepts that form the foundation of sustainability within corporate environments.
2. Explore the sustainability implementation model, focusing on effective measures and reporting strategies to track and communicate sustainability efforts.
3. Identify and define best practices and critical success factors essential for achieving sustainability goals within organizations.
CONTENTS
1. Introduction and Key Concepts of Sustainability
2. Principles and Practices of Sustainability
3. Measures and Reporting in Sustainability
4. Sustainability Implementation & Best Practices
To download the complete presentation, visit: https://www.oeconsulting.com.sg/training-presentations
Unveiling the Secrets How Does Generative AI Work.pdfSam H
At its core, generative artificial intelligence relies on the concept of generative models, which serve as engines that churn out entirely new data resembling their training data. It is like a sculptor who has studied so many forms found in nature and then uses this knowledge to create sculptures from his imagination that have never been seen before anywhere else. If taken to cyberspace, gans work almost the same way.
"𝑩𝑬𝑮𝑼𝑵 𝑾𝑰𝑻𝑯 𝑻𝑱 𝑰𝑺 𝑯𝑨𝑳𝑭 𝑫𝑶𝑵𝑬"
𝐓𝐉 𝐂𝐨𝐦𝐬 (𝐓𝐉 𝐂𝐨𝐦𝐦𝐮𝐧𝐢𝐜𝐚𝐭𝐢𝐨𝐧𝐬) is a professional event agency that includes experts in the event-organizing market in Vietnam, Korea, and ASEAN countries. We provide unlimited types of events from Music concerts, Fan meetings, and Culture festivals to Corporate events, Internal company events, Golf tournaments, MICE events, and Exhibitions.
𝐓𝐉 𝐂𝐨𝐦𝐬 provides unlimited package services including such as Event organizing, Event planning, Event production, Manpower, PR marketing, Design 2D/3D, VIP protocols, Interpreter agency, etc.
Sports events - Golf competitions/billiards competitions/company sports events: dynamic and challenging
⭐ 𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐝 𝐩𝐫𝐨𝐣𝐞𝐜𝐭𝐬:
➢ 2024 BAEKHYUN [Lonsdaleite] IN HO CHI MINH
➢ SUPER JUNIOR-L.S.S. THE SHOW : Th3ee Guys in HO CHI MINH
➢FreenBecky 1st Fan Meeting in Vietnam
➢CHILDREN ART EXHIBITION 2024: BEYOND BARRIERS
➢ WOW K-Music Festival 2023
➢ Winner [CROSS] Tour in HCM
➢ Super Show 9 in HCM with Super Junior
➢ HCMC - Gyeongsangbuk-do Culture and Tourism Festival
➢ Korean Vietnam Partnership - Fair with LG
➢ Korean President visits Samsung Electronics R&D Center
➢ Vietnam Food Expo with Lotte Wellfood
"𝐄𝐯𝐞𝐫𝐲 𝐞𝐯𝐞𝐧𝐭 𝐢𝐬 𝐚 𝐬𝐭𝐨𝐫𝐲, 𝐚 𝐬𝐩𝐞𝐜𝐢𝐚𝐥 𝐣𝐨𝐮𝐫𝐧𝐞𝐲. 𝐖𝐞 𝐚𝐥𝐰𝐚𝐲𝐬 𝐛𝐞𝐥𝐢𝐞𝐯𝐞 𝐭𝐡𝐚𝐭 𝐬𝐡𝐨𝐫𝐭𝐥𝐲 𝐲𝐨𝐮 𝐰𝐢𝐥𝐥 𝐛𝐞 𝐚 𝐩𝐚𝐫𝐭 𝐨𝐟 𝐨𝐮𝐫 𝐬𝐭𝐨𝐫𝐢𝐞𝐬."
Taurus Zodiac Sign_ Personality Traits and Sign Dates.pptxmy Pandit
Explore the world of the Taurus zodiac sign. Learn about their stability, determination, and appreciation for beauty. Discover how Taureans' grounded nature and hardworking mindset define their unique personality.
What is the TDS Return Filing Due Date for FY 2024-25.pdfseoforlegalpillers
It is crucial for the taxpayers to understand about the TDS Return Filing Due Date, so that they can fulfill your TDS obligations efficiently. Taxpayers can avoid penalties by sticking to the deadlines and by accurate filing of TDS. Timely filing of TDS will make sure about the availability of tax credits. You can also seek the professional guidance of experts like Legal Pillers for timely filing of the TDS Return.
Cracking the Workplace Discipline Code Main.pptxWorkforce Group
Cultivating and maintaining discipline within teams is a critical differentiator for successful organisations.
Forward-thinking leaders and business managers understand the impact that discipline has on organisational success. A disciplined workforce operates with clarity, focus, and a shared understanding of expectations, ultimately driving better results, optimising productivity, and facilitating seamless collaboration.
Although discipline is not a one-size-fits-all approach, it can help create a work environment that encourages personal growth and accountability rather than solely relying on punitive measures.
In this deck, you will learn the significance of workplace discipline for organisational success. You’ll also learn
• Four (4) workplace discipline methods you should consider
• The best and most practical approach to implementing workplace discipline.
• Three (3) key tips to maintain a disciplined workplace.
Skye Residences | Extended Stay Residences Near Toronto Airportmarketingjdass
Experience unparalleled EXTENDED STAY and comfort at Skye Residences located just minutes from Toronto Airport. Discover sophisticated accommodations tailored for discerning travelers.
Website Link :
https://skyeresidences.com/
https://skyeresidences.com/about-us/
https://skyeresidences.com/gallery/
https://skyeresidences.com/rooms/
https://skyeresidences.com/near-by-attractions/
https://skyeresidences.com/commute/
https://skyeresidences.com/contact/
https://skyeresidences.com/queen-suite-with-sofa-bed/
https://skyeresidences.com/queen-suite-with-sofa-bed-and-balcony/
https://skyeresidences.com/queen-suite-with-sofa-bed-accessible/
https://skyeresidences.com/2-bedroom-deluxe-queen-suite-with-sofa-bed/
https://skyeresidences.com/2-bedroom-deluxe-king-queen-suite-with-sofa-bed/
https://skyeresidences.com/2-bedroom-deluxe-queen-suite-with-sofa-bed-accessible/
#Skye Residences Etobicoke, #Skye Residences Near Toronto Airport, #Skye Residences Toronto, #Skye Hotel Toronto, #Skye Hotel Near Toronto Airport, #Hotel Near Toronto Airport, #Near Toronto Airport Accommodation, #Suites Near Toronto Airport, #Etobicoke Suites Near Airport, #Hotel Near Toronto Pearson International Airport, #Toronto Airport Suite Rentals, #Pearson Airport Hotel Suites
Memorandum Of Association Constitution of Company.pptseri bangash
www.seribangash.com
A Memorandum of Association (MOA) is a legal document that outlines the fundamental principles and objectives upon which a company operates. It serves as the company's charter or constitution and defines the scope of its activities. Here's a detailed note on the MOA:
Contents of Memorandum of Association:
Name Clause: This clause states the name of the company, which should end with words like "Limited" or "Ltd." for a public limited company and "Private Limited" or "Pvt. Ltd." for a private limited company.
https://seribangash.com/article-of-association-is-legal-doc-of-company/
Registered Office Clause: It specifies the location where the company's registered office is situated. This office is where all official communications and notices are sent.
Objective Clause: This clause delineates the main objectives for which the company is formed. It's important to define these objectives clearly, as the company cannot undertake activities beyond those mentioned in this clause.
www.seribangash.com
Liability Clause: It outlines the extent of liability of the company's members. In the case of companies limited by shares, the liability of members is limited to the amount unpaid on their shares. For companies limited by guarantee, members' liability is limited to the amount they undertake to contribute if the company is wound up.
https://seribangash.com/promotors-is-person-conceived-formation-company/
Capital Clause: This clause specifies the authorized capital of the company, i.e., the maximum amount of share capital the company is authorized to issue. It also mentions the division of this capital into shares and their respective nominal value.
Association Clause: It simply states that the subscribers wish to form a company and agree to become members of it, in accordance with the terms of the MOA.
Importance of Memorandum of Association:
Legal Requirement: The MOA is a legal requirement for the formation of a company. It must be filed with the Registrar of Companies during the incorporation process.
Constitutional Document: It serves as the company's constitutional document, defining its scope, powers, and limitations.
Protection of Members: It protects the interests of the company's members by clearly defining the objectives and limiting their liability.
External Communication: It provides clarity to external parties, such as investors, creditors, and regulatory authorities, regarding the company's objectives and powers.
https://seribangash.com/difference-public-and-private-company-law/
Binding Authority: The company and its members are bound by the provisions of the MOA. Any action taken beyond its scope may be considered ultra vires (beyond the powers) of the company and therefore void.
Amendment of MOA:
While the MOA lays down the company's fundamental principles, it is not entirely immutable. It can be amended, but only under specific circumstances and in compliance with legal procedures. Amendments typically require shareholder
Discover the innovative and creative projects that highlight my journey throu...dylandmeas
Discover the innovative and creative projects that highlight my journey through Full Sail University. Below, you’ll find a collection of my work showcasing my skills and expertise in digital marketing, event planning, and media production.
Enterprise Excellence is Inclusive Excellence.pdfKaiNexus
Enterprise excellence and inclusive excellence are closely linked, and real-world challenges have shown that both are essential to the success of any organization. To achieve enterprise excellence, organizations must focus on improving their operations and processes while creating an inclusive environment that engages everyone. In this interactive session, the facilitator will highlight commonly established business practices and how they limit our ability to engage everyone every day. More importantly, though, participants will likely gain increased awareness of what we can do differently to maximize enterprise excellence through deliberate inclusion.
What is Enterprise Excellence?
Enterprise Excellence is a holistic approach that's aimed at achieving world-class performance across all aspects of the organization.
What might I learn?
A way to engage all in creating Inclusive Excellence. Lessons from the US military and their parallels to the story of Harry Potter. How belt systems and CI teams can destroy inclusive practices. How leadership language invites people to the party. There are three things leaders can do to engage everyone every day: maximizing psychological safety to create environments where folks learn, contribute, and challenge the status quo.
Who might benefit? Anyone and everyone leading folks from the shop floor to top floor.
Dr. William Harvey is a seasoned Operations Leader with extensive experience in chemical processing, manufacturing, and operations management. At Michelman, he currently oversees multiple sites, leading teams in strategic planning and coaching/practicing continuous improvement. William is set to start his eighth year of teaching at the University of Cincinnati where he teaches marketing, finance, and management. William holds various certifications in change management, quality, leadership, operational excellence, team building, and DiSC, among others.
3. Monitoring the condition of components.
Using individual vibration characteristics
to identify potential failures and root
causes at an early stage.
Maintenance intervals become planned
with optimal use of component life.
Overall monitoring of machine vibrations
according to the ISO 10816 standard.
Early recognition of vibration changes
avoids consequential damage and
increases machine availability.
Permanent monitoring of vibration
characteristics in real time. Sharp rises in
dynamic forces are detected enabling fast
machine shutdown.
Fast reaction prevents damage to
machine components, machine tool and
workpiece.
ifm electronic: development, design,
and production with the highest quality
standards.
Detection with integrated evaluation of
vibration signals are the basis for
seamless integration into online condition
monitoring in automation and control
technology.
3
System
Product
overview
Machine
protection
Process
monitoring
Condition
monitoring
Vibration
monitoring
4 - 5
6 - 7
8 - 9
10 - 12
4. 4
Easy:
Monitoring of overall
machine health.
Standardized:
ISO10816 conformance.
Safe:
Machine protection
against failure.
Flexible:
Simple application integration.
Reliable:
Increase machine uptime.
Monitoring vibration velocity.
The vibration switch VK monitors
online the overall condition of
machines and equipment according
to ISO 10816.
The sensor measures the rms values of
overall vibration and signals when
vibration levels are too high.
Vibration monitoring
Loose foot,
unbalance
Misalignment
5. 5
Why is vibration monitoring necessary?
All machines are subject to vibrations.
For example machine unbalance,
misalignment and resonances can cause
machines to vibrate above an acceptable
level. A rise in vibrations is detrimental to
machine health. This results in unexpected
machine failure and reduced availability.
The solution with efector octavis:
Overall vibration velocity is used in
industry standards to evaluate the overall
machine condition. Recommendations for
switching thresholds are given in
ISO 10816. All ifm vibration sensors
conform to the ISO 10816 standard.
efector octavis detects the occurrence of
potential damage at an early stage.
Vibration sensors
type VSA/VSP
Robust accelero-
meters VSA or
intrinsically safe
sensors VSP,
for connection
to diagnostic
electronics VSE.
Intelligent
vibration switch
type VN
Local display,
onboard time-
stamped history
function.
Basic vibration
switch type VK
Switching output
and analogue
function. Response
delay to avoid
triggers during
run-up.
Basic vibration
transmitter type VT
Simple transmitter
function 4…20 mA.
Diagnostic electro-
nics type VSE
Cabinet mounting,
4-channel diagno-
stic module with
additional inputs
for process values,
onboard history
function and
analysis, suitable
for networking.
System
Product
overview
Machine
protection
Process
monitoring
Condition
monitoring
Vibration
monitoring
Early recognition of vibration changes
and avoidance of consequential damage
Early recognition of unbalance.
Due to unbalance or misalignment
conditions permissible machine
vibrations can rapidly exceed allowable
levels. The result is unexpected
downtime and reduced availability.
With sensor type VN it is possible to
continually monitor, display and
document vibrations over 120 rpm.
Monitor up to 4 measurement points.
Using the accelerometers type VSA,
it is possible to measure machine vibra-
tions in locations which are difficult to
access. With the diagnostic electronics
type VSE it is possible to measure and
document up to 4 measurement
points. The Ethernet interface enables
integration into networks for remote
diagnostics.
Vibration sensors – easy setup:
www.ifm.com/gb/octavis-setting-guide
Machine vibration trend according
to ISO 10816
Time
Vibration
velocity
Alarm
Warning
6. Safe:
Vibration monitoring of
critical machines.
Predictive:
Machine diagnostics for early
warning of ensuing damage and
avoiding catastrophic failure.
Optimize:
Maintenance intervals can be
planned in advance.
Long lasting:
Optimal use of component
life-time.
Cost-effective:
TCO (Total Cost of Ownership)
model concepts.
Counting:
Run-time counter function
for performance-orientated
production.
Vibration diagnostics on a mixer.
Unplanned down-time on critical
machines is an enormous cost factor.
The permanent condition monitoring
of the complete plant makes it possible
to act predictively and to optimize
the process.
Condition monitoring
Machine protection and remote
maintenance.
The monitoring of wear and tear of
gears in wind turbines, generators and
rotor bearings contributes to efficient
maintenance. Alarm outputs are used
to protect the equipment and for
remote maintenance.
Gears
Gear mesh,
defective
gear teeth
Pumps
eccentricity,
cavitation
Rolling
element bearing
Misalignment
Loose foot,
unbalance
6
7. Why is condition monitoring necessary?
Condition monitoring makes it possible to
recognise machine damage at an early
stage. It is therefore possible to plan
maintenance intervals and make optimum
use of the life-time of critical components.
Automated quality monitoring identifies
deviations before parts are damaged.
Run-time counters can be used to detect
specific characteristics and influence
factors (operating hours, production).
The solution with efector octavis
With efector octavis it is not only possible
to monitor vibration values but also
conduct signal analysis and machine
diagnostics directly on the machine.
Machine conditions are detected at the
point of measurement and are transferred
either as alarm or condition values to the
plc or control level. The major require-
ments of modern machine monitoring are
fulfilled: compatibility, modularity and
transferable configuration.
Intrinsically safe
accelerometer
type VSP
In the chemical
and mining indu-
stries it is possible
to transfer signals
over long lengths.
For use with a
safety barrier and
standard diagno-
stics unit mounted
outside the
ATEX area.
Vibration sensors
type VSA
Small design for
connection to
diagnostic elec-
tronics VSE, ideal
for mounting loca-
tions which are
difficult to access.
Max. cable length
250 m.
Intelligent
vibration switch
type VN
Local display, with
data logging for
validating fault
conditions, for
vibrations above
120 rpm.
Diagnostic
electronics
type VSE
Cabinet mounting,
4-channel diagno-
stic module with
additional inputs
for process values,
onboard history
function and
analysis, suitable
for networking.
Increase availability and reliability,
reduce maintenance costs and ensure quality
Condition monitoring systems
from ifm:
Oil humidity sensor, oil particle
counter, encoders, speed sensors,
temperature sensors, pressure sensors
and compressed air meters complete
the portfolio for condition monitoring.
ifm also offers software tools for
configuration, visualisation and data
recording.
Condition monitoring
Time
Failure
probability
7
System
Product
overview
Machine
protection
Process
monitoring
Condition
monitoring
Vibration
monitoring
More information on systems for
condition monitoring of machines:
www.ifm.com/gb/condition-monitoring
8. Dynamic:
Monitoring of dynamic forces
such as milling.
Fast:
Reaction times of 1 ms.
Safe:
Protects machines, tools and
workpieces from costly damage.
Preventative:
Early recognition of arising
damage avoids unplanned
down-time.
Inclusive:
Calibration-free due to
integrated self-test.
Recognition of unusual vibrations.
The vibration sensor is screwed into
the spindle and detects even the most
subtle vibrations e.g. unbalance.
The sensor is also resistant to fast
movements and high forces.
Machine protection
and process monitoring
Workpiece
protection
Tool protection
Machine
component
protection
8
Photo source: DMG / MORI SEIKI
www.dmgmoriseiki.com
T3
T2
T1
9. Why is machine protection and process
monitoring necessary?
Incorrect settings or usage of incorrect
tools can lead to crash situations between
components and machine tool spindles.
This results in high consequential costs.
The solution with efector octavis:
The early recognition of rising dynamic
forces enables the energy to be withdrawn
from the operating process. Scrap and
consequential damages are reduced.
The permanent real-time monitoring of
vibration characteristics and the integrated
alarm interfaces (switching contacts /
analogue signals) enable the machine
to be shut down before serious damage
occurs. Shut down is possible within
one millisecond.
Different alarm outputs make it possible
to use progressive and differentiated
alarms to the PLC level (green, yellow, red).
The alarm thresholds can be adapted
online. Integration into the machine
controls is possible using analogue /
binary signals / TCP/IP or fieldbus module.
Diagnostic
electronics
type VSE
Frequency-
selective monitor-
ing, suitable for
networking.
Onboard time-
stamped history
function, counter
function.
Accelerometer
type VSA
Failure-free
operation even
when subject to
fast movements or
high forces.
Integrated self-test
for continuous
safety.
Reduction of scrap and consequential damage
Avoiding consequential damages
on a machine tool.
Changes in cutting forces, caused for
example by blunt drills or blockage
due to chips, are recognised by
changes in the vibration behaviour.
Each tool can be assigned with
individual tolerance levels e.g. a
warning and a shut-down threshold.
It is thus possible to reliably avoid
damage to the workpiece.
Machine protection:
Spindle collision is recognised with 1 ms
Time
Dynamic
forces
9
System
Product
overview
Machine
protection
Process
monitoring
Condition
monitoring
Vibration
monitoring
Early warning
Alarm
Crash
progression
without alarm
Trending in a stamping process
Time
Alarm
Alarm
Warning
Alarm
Warning
Process cycle
1 ms
Adaptive thresholds
10. 10
Intelligent
vibration switch
and transmitter
Basic
vibration switch
and transmitter
Analysis systems
Software solutions
and accessories
efector octavis
Type VSA / VSP / VSE
Systems for vibration monitorings
The right product for your application
For industrial
applications
efector octavis
Type VN
efector octavis
Type VT / VK
11. A
n
a
l
o
g
u
e
o
u
t
p
u
t
System
Product
overview
Machine
protection
Process
monitoring
Condition
monitoring
Vibration
monitoring
11
S
w
i
t
c
h
i
n
g
o
u
t
p
u
t
The compact vibration sensor type VN
monitors the overall vibration conditions
of machines and equipment according to
ISO 10816. Distinguishing features are
simple set-up and integrated display with
green, yellow, red function. A PC soft-
ware is not necessary.
Vibration switch and transmitter for the
permanent monitoring of overall machine
vibrations according to ISO 10816.
The sensor measures the rms values of
overall vibration and signals when
vibration levels are too high.
In-depth vibration analysis using compact
sensors and separate evaluation
electronics. History function, real-time
clock and counter functions enable
detailed monitoring and analysis.
Ethernet TCP/IP interface for integration
into higher systems.
OPC – highly flexible and easy to
implement.
OPC is the manufacturer independent
standard for communication in the
automation industry. It is used where
sensors, actuators and control systems
from different manufacturers form a
common and flexible network.
I
n
t
e
g
r
a
t
e
d
d
i
s
p
l
a
y
H
i
s
t
o
r
y
f
u
n
c
t
i
o
n
N
e
t
w
o
r
k
c
a
p
a
b
i
l
i
t
y
S
i
g
n
a
l
i
n
p
u
t
s
e
.
g
.
t
e
m
p
e
r
a
t
u
r
e
D
i
a
g
n
o
s
i
s
C
o
u
n
t
e
r
s
The ifm OPC server supports the most
commonly used OPC versions, OPC DA
(Data Access) and OPC XML DA.
ifm electronic offers a wide range of
cables for different environmental
conditions.
VT
VK VK
12. Seemless integration
From a simple switch to in-depth
diagnostics.
ifm systems for condition monitoring of
machines are distinguished by their ease-
of- use and consistency. The integrated
intelligence for dynamic signal evaluation
reduces the demands on band width and
algorithmics at the control level.
Sensors are easy to retrofit and signify a
low investment per machine.
Control level
Optional data acquisition
CMS Condition monitoring systems
Online diagnostics
User and
parameter
software VES003
OPC server
software
VOS001
Profibus-
Gateway
User and
parameter
software VES003
Crossover
cable E30112
Diagnostic
electronics
VSExx
Diagnostic
electronics
VSExx
Safety
barrier
Vibration
switch
VKxxx
Accelerometers type
VSAxx
Temperature
sensor
TRxxx
Compressed
air meter
SDxxx
Vibration
transmitter
VTVxx
Vibration
switch
VNxxx
Accelerometer
VSPxxx
ATEX
PLC
MES SCADA CMMS
13. Systems for vibration monitoring –
You have the choice
Basic vibration switch and transmitter
Description Order no.
Vibration transmitter according to ISO 10816; measurement
range RMS: 0...25 mm/s; analogue outputs 4...20 mA;
high-grade stainless steel 316L; IP 69K; M12 connector
VTV122
Intelligent vibration switches and transmitters
Description Order no.
Vibration switch; measurement range 0...25 mm/s;
frequency 2/10...1000 Hz, (selectable);
v-peak or v-RMS, switching outputs or 1 switching and
1 analogue output; 1 analogue input 4...20 mA;
history function; data interface USB (M8 x 1);
4-digit alphanumeric display; M12 connector
VNB001
Vibration monitor according to ISO 10816;
measuring range RMS: 0...25 / 0…50 mm/s;
1 switching output and response delay (1…60 s)
via dial setting; 1 analogue output 4...20 mA;
M12 connector
VKV021
VKV022
Accelerometers
Description Order no.
Accelerometer for connection to diagnostic electronics VSE;
measuring range ± 25 g, 0…6000 Hz;
thread M8 x 1.25; 90 ° conus; max. 125 °C; IP 69K;
M12 connector
VSA001
Diagnostic systems
Description Order no.
Diagnostic electronics for accelerometers type VSA / VSP;
cabinet mounting; frequency-selective machine
monitoring of up to 4 measurement points; Ethernet
interface TCP/IP; onboard time-stamped history function;
2 switching outputs or 1 switching and 1 analogue output;
counter function
VSE002
Diagnostic electronics for accelerometers type VSA / VSP;
cabinet mounting; frequency-selective machine
monitoring of up to 4 measurement points; Ethernet
interface TCP/IP; onboard time-stamped history function;
2 switching outputs or 1 switching and 1 analogue output;
further freely configurable I/O; counter function
VSE100
Accelerometer for connection to diagnostic electronics VSE;
measuring range ± 25 g, 0…10000 Hz;
thread M16 x 1.5; temperature max. 85 °C; IP 67;
cable length 0.6 m
VSA002
Accelerometer for connection to diagnostic electronics VSE;
measuring range ± 25 g, 0…10000 Hz; height 13.6 mm;
mounting hole 5.5 mm; temperature max. 80 °C; IP 67;
cable length 3 m / 10 m
VSA004
VSA005
Accelerometer for use in hazardous area;
ATEX group II category 1D/1G;
connection to diagnostic electronics VSE via safety barrier;
cable length 10 m
VSP01A
VSP02A
Software solutions · Accessories
Description Order no.
efector octavis OPC server software for
25...1000 connections
VOS001
to
VOS005
Description Order no.
Peek adapter for VSA001 E30132
Protective cover for VK E30094
Crossover cable for VSE / VSA E30112
Adapter UNF/M5 for type VN E30137
Cable, M12, straight, 5-pole, 2 m PUR EVC070
Cable, M12, straight, 5-pole, 5 m PUR EVC071
Cable, M12, screened, straight, 5-pole, 30 m PUR E12008
Software for configuration, detection of measurement
data and export of history files for unit type VSE
VES003
USB/M8 cable and history software for sensor type VN E30136
14. ifm electronic gmbh
Friedrichstraße 1
45128 Essen
Tel. +49 / 201 / 24 22-0
Fax +49 / 201 / 24 22-1200
E-mail info@ifm.com
Position sensors
Sensors for
motion control
Industrial imaging
Safety technology
Process sensors
Condition monitoring
systems
Industrial
communication
Identification systems
Systems for
mobile machines
Connection
technology
Overview
ifm product range:
Accessories
Visit our website:
www.ifm.com
Over 70 locations worldwide –
at a glance at www.ifm.com
ifm
article
no.
78000237
·
We
reserve
the
right
to
make
technical
alterations
without
prior
notice.
·
Printed
in
Germany
on
non-chlorine
bleached
paper.
09/13