This document discusses how to configure the logical distance of GPON devices. It lists compatible modules and OLT/ONT devices, then explains how to use the "port range" command to set the maximum and minimum logical distance for an ONT during ranging. Setting the distances properly avoids impacting other ONT services. The "undo port range" command restores the default ranging compensation distance.
These are sample slides taken from my 4 days long "GPON-FTTx" training course. This course has over 380 slides and it is a great source of learning about various topics related to GPON & FTTx. There are tons of exercises and real-world examples provided in teaching material.
These are sample slides taken from my 4 days long "GPON-FTTx" training course. This course has over 380 slides and it is a great source of learning about various topics related to GPON & FTTx. There are tons of exercises and real-world examples provided in teaching material.
Tutorial about MPLS Implementation with Cisco Router, this first of two chapter discuss about What is MPLS, Network Design, P, PE, and CE Router Description, Case Study of IP MPLS Implementation, IP and OSPF Routing Configuration
Basics of Optical Network Architecture, PON & GPONSyed Shujat Ali
Our Team's University Project | A short presentation based project regarding optical fiber communication in which basics of Optical Network Architecture, PON & GPON were discussed.
A quick look at 5G System architecture in Reference point representation and in Service Based representation and also look at the different Network Functions (NFs) within the 5G System.
Presented by Andy Sutton, Principal Network Architect - Chief Architect’s Office, TSO, BT at IET "Towards 5G Mobile Technology – Vision to Reality" seminar on 25th Jan 2017
Shared with permission
Tutorial about MPLS Implementation with Cisco Router, this first of two chapter discuss about What is MPLS, Network Design, P, PE, and CE Router Description, Case Study of IP MPLS Implementation, IP and OSPF Routing Configuration
Basics of Optical Network Architecture, PON & GPONSyed Shujat Ali
Our Team's University Project | A short presentation based project regarding optical fiber communication in which basics of Optical Network Architecture, PON & GPON were discussed.
A quick look at 5G System architecture in Reference point representation and in Service Based representation and also look at the different Network Functions (NFs) within the 5G System.
Presented by Andy Sutton, Principal Network Architect - Chief Architect’s Office, TSO, BT at IET "Towards 5G Mobile Technology – Vision to Reality" seminar on 25th Jan 2017
Shared with permission
The QinQ technology is called VLAN dot1q tunnel, 802.1Q tunnel, VLAN Stacking technology. The standard comes from IEEE 802.1ad and it is the expansion of the 802.1Q protocol. QinQ adds one layer of 802.1Q tag (VLAN tag) based on the original 802.1Q packet head. With the double layers of tags, the VLAN quantity is increased to 802.1Q.
How to configure the QinQ? Here we will list two occasions and they can be applied to Huawei switches higher level than Quidway S2700 and with EI version, Huawei S3700 switches and Quidway S5700, etc.
There are several categories info that is what MITS current carrying in 5G application. You are welcome to contact us for more info.
1. more options for 1588 GM/Sync-E to support LLS-C1/C2/C3
2. FPGA SoC, SmartNIC for 5G RU/DU/CU applications
3. Optics for 5G fronthaul -- 10G/25G
4. High Power PoE 802.3bt (upto 90W/PSE & 71W/PD)
5. Signal Integrity tools -- De-embedded SW + True Odd Probe (upto 70Ghz)
1. How to configure the logical distance of GPON
How to configure the logical distance of GPON devices, below is the
details, and the related products can be:
• The module: GPFD, GPBH, XGBC, GPBD;
• The OLT devices: MA5683T, MA5680T, MA5608T, MA5603T, MA5600T,
MA5606T;
• The ONT devices: HG8010H GPON Terminal, HG8240F GPON Terminal,
HG8245A GPON Terminal, HG8245 GPON Terminal, HG8240 GPON Terminal,
HG8010 GPON Terminal, HG8247 GPON Terminal and so on.
The configuration:
The “port range” command is used to configure the maximum and minimum
logical distance. During ranging for an ONT, the appropriate maximum and
minimum logical distance can avoid long-term impact on normal services of
other ONTs.
After this command is executed, the ONT will be re-authenticated and go
online again.
The “undo port range” command is used to restore the ranging
compensation distance of a GPON port to the default value.
Format
port portid range { max-distance max-distance | min-distance min-distance
}*
undo port portid range
Parameters
1
2. Parameter Description Value
portid Indicates the GPON port
ID.
Numeral type.
Range: varies with the
board type.
max-distance max-distanceSets the maximum logical
distance (maximum
distance for short) of the
ONT.
Numeral type. Range:
0-60 km.
• GPON board: 0-60
km.
• XG-PON board: 0-
100 km.
Unit: km.
Default: 20 km.
min-distance min-distance Sets the minimum logical
distance (minimum
distance for short) of the
ONT.
Numeral type. Range:
0-40.
• GPON board: 0-40
km.
• XG-PON board: 0-
60 km.
Unit: km.
Default: 0.
Modes
GPON mode
Level
Operator level
2
3. Usage Guidelines
• Run the config command to enter global config mode, and then run the interface
gpon command to enter GPON mode.
• Ranging refers to the OLT calculation of the delay of each ONT based on the
physical distance of the ONT to prevent the conflict of the upstream data from
different ONTs.
o When the ranging starts, the OLT sends a ranging message to the ONT
and starts waiting for the ONT response. When the OLT is waiting for the
ONT response, the services of the other ONTs are unavailable.
Therefore, the period of waiting for the ONT response needs to be
shortest-possible.
Usage of the minimum distance: After sending a ranging
message, the OLT determines beforehand the start time of waiting
for the ONT response according to the preset minimum distance.
Usage of the maximum distance: After sending a ranging
message, the OLT determines the end time of waiting for the ONT
response according to the preset maximum distance.
o Ensure the following when configuring the minimum and maximum
distance:
For GPON boards, maximum distance - minimum distance <= 20
km
For XG-PON boards, maximum distance - minimum distance <=
40 km
Actual physical distance between the OLT and ONT ≈ (maximum
distance + minimum distance)/2
More related:
What is GPON
Huawei ONT Classification
Huawei HG8245 GPON Terminal
Huawei OLT Optical Module Specification GPON B+ Vs GPON C+
The Main Differences between HG8245 SC UPC and HG8245 SC APC
More Huawei products and Reviews you can visit: http://www.huanetwork.com/blog
3
4. Huanetwork.com is a world leading Huawei networking products distributor, we wholesale
original new Huawei networking equipments, including Huawei switches, Huawei routers,
Huaweisymantec security products, Huawei IAD, Huawei SFP and other Huawei
networking products. Our customers include telecom operators, Huawei resellers, ISP
and system integrators. Right now most of our sales are contributed by regular
customers.
And in our Huanetwork Lab, we have below products ready for test:
• Huawei OLT Optical Line Terminal MA5600T Series
• Huawei MDU Multiple Dwelling Unit MA5620
• Huawei ONT Optical Network Terminal HG8245A, HG8245, HG8010H
• Huawei DSLAM MA5616
• Huawei AC-DC Power Converter System EPS30-4815AF
• Huawei Optical Splitter 1:32
• Huawei X700 Series GE Switch S5700-28C-EI with 10G Uplink Module
• Huawei X700 Series Access Layer Switch S2700-9TP-EI-AC
• Huawei X300 Series Layer 3 Full Optical DC Switch S3328TP-EI-24S-DC
• Huawei SFP, SFP+, XFP Module, GPON B+ C+ Module
• Huawei Routers AR1200 Series
• Huawei U2000 Network Management System
• Huawei eSight Network Management System
• Cisco WS-C3560X-24P-L Switch (for compatible test purpose)
Now with Huanetwork Lab, customers can do below test:
1. FTTx System Test
2. ADSL2+ System Test
3. Campus LAN/WAN Test
4. Optical Transceiver Test
5. Network Management Test
6. Compatible Test
7. Software Upgrade Test
8. Products Test
For customers interested in Huanetwork products, please feel free to contact your sales
request for test arrangement. Kindly note, Huanetwork Lab is not open to public, it is just
available for Huanetwork customers. Huanetwork reserve the right to reject any test/login
requirement.
Our website: http://www.huanetwork.com
4