5. Please click the link that I sent on the chat box. Enter your name and click JOIN
6.
7.
8. DO'S
• Use pliers to cut hardened wire.
• Use a larger pair of pliers or bolt cutters if needed.
DONT'S
• Do not enlarge the handle length of pliers to gain more grip.
• Do not use pliers as a substitute for a wrench when turning
bolts and nuts. Pliers cannot grip bolts and nuts properly and
might slip.
• Do not use pliers as a hammer on the handle because it will
result in cracks or breaks.
9. DO'S
• Always use screwdriver tip that fits the slot of the screw.
• Use magnetic or screw-holding screwdrivers to fastened in
tight areas.
DONT'S
• Do not use screwdrivers as a pry bar, chisel, and punch stirrer
or scraper.
• Never use screwdrivers with broken handles.
• Never use pliers on a screwdriver for extra control. Only use
wrench or screwdrivers specifically designed to accept them
10. DO'S
• Always use a sharp blade because dull blades need greater
force and thus are more likely to slip.
• If the tool has a retractable blade, retract it instantly after
use, and retract it fully. Likewise, close scissors or snips when
not in use.
• Keep your hand away from the blade of knife because it might
cut your skin.
DONT'S
• Do not use knife to open cans or pry off objects. Blades are
brittle and can slip easily.
• Avoid horseplay with a tool in your hand.
11. • Ensure that you do not carry tools up or down a ladder in a
way that stops you from holding onto the ladder properly.
• Ensure that you are very careful when handing tools to
others. You should do it with care, and not to toss them.
• Ensure that pointed tools are in a toolbox, in a tool pouch or a
tool belt (pointed downwards) or in the hand, pointed away
from the body.
• Ensure that tools are never left lying around and are placed
in the storage when not in use.
12. Directions: On a short bond paper, illustrate 1 scenario of unsafe use of hand tools
and write a brief description on your drawing.
13.
14.
15. Directions: Write True if the statement is correct otherwise,
write False on the space before each number.
________1. Never use pliers on a screwdriver for extra control.
________2. A dull blade needs greater force and thus are more
likely to slip.
________3. Use pliers as a hammer on the handle.
________4. Do not increase the handle length of pliers to gain
more leverage.
_______5. Always use screwdriver tip that fits the head of screw