Groschopp 47747 specsheet
•
0 likes•16 views
This document provides specifications for an AC 3 Ph 6540 TENV motor with a PS 1900 90:1 ratio gearbox. Key specifications include a voltage of 230v 60Hz, speed of 1460 rpm, output of 16.2 rpm and 43.9 lb-in of torque. Charts show torque and efficiency at varying speeds for cold and hot operating conditions. The motor has a continuous duty cycle and system efficiency of 17.7%.
Report
Share
Report
Share
Download to read offline
Recommended
Groschopp 47748 specsheet
This document provides specifications for an AC 3 Ph 6540 TENV motor with a PS 1900 120:1 ratio gearbox. The motor runs at 1460 rpm on 230V 60Hz power and is rated for 12.2 rpm output speed, 64.9 lb-in of torque, and 0.19 amps of current. Breakdown and pullup tests were also run showing lower speeds and higher torques than the rating. Efficiency is highest for the gearbox at 48.3% and lowest for the overall system at 19.6%. Startup requires 0.39 amps and generates 155.64 lb-in of torque. A graph shows efficiency decreases with speed.
Groschopp 47740 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a 230V 60Hz voltage and 1460rpm speed that is connected to a PS1900 10:1 ratio gearbox. The motor has a rated speed of 146.2rpm, torque of 8.5lb-in, and current of 0.19amps at an output of 15 watts and 0.0198HP. Breakdown and pullup tests were also run showing speed and torque values. Efficiency levels of the gearbox, motor, and system are listed along with start/stall current and torque conditions. A graph shows efficiency at varying torque and speed levels for cold and hot operation.
Groschopp 47727 specsheet
This document provides specifications for an AC 3 Phase 6540 TEFC motor with a PS 1900 10:1 ratio gearbox. Key specifications include a voltage of 230V 60Hz, speed of 1450 rpm, output speed of 145.4 rpm at 11.6 lb-in of torque drawing 0.25 amps of current. The motor has a continuous duty cycle and system efficiency of 30.8%. Startup requires 0.49 amps producing 21.43 lb-in of torque. A graph shows efficiency curves against torque and speed for cold and hot operation. The motor is sold and serviced by Electromate.
Groschopp 47777 specsheet
This document provides specifications for a small AC motor including its voltage, speed, gearbox ratio, efficiency ratings at various torques and speeds, and contact information for the supplier. The motor runs at 1500 rpm on 230v 60Hz power, with a 10:1 ratio gearbox. It produces 149.6 rpm and 6.1 lb-in of torque under normal operating conditions and has a continuous duty cycle with peak efficiency of 22.9%.
Groschopp 47734 specsheet
The document provides specifications for an AC 3 Phase 6540 TEFC motor with a 230V 60Hz voltage and 1450rpm speed connected to a PS1900 90:1 ratio gearbox. The motor has a rated output of 16.2rpm at 71.4lb-in of torque drawing 0.25amps. Charts show torque and efficiency curves across a range of speeds.
Groschopp 47775 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor with a PS 1900 20:1 ratio gearbox. Key details include:
- Motor operates at 115V 60Hz and produces 74.1 rpm and 16.1 lb-in of torque drawing 0.64 amps of current.
- Gearbox has a 20:1 ratio, so motor output is increased to 1480 rpm.
- Charts show torque and speed characteristics along with efficiency at varying loads both when cold and hot.
Groschopp 47785 specsheet
This document provides specifications for a motor including its voltage, speed, gearbox ratio, product ID number, ratings for speed, torque, current, output, and duty cycle. It also includes efficiency percentages for the gearbox, motor, and system, as well as start/stall conditions. Additionally, it shows torque and speed curves along with efficiency versus torque for both cold and hot operating conditions. The motor is serviced and sold by Electromate.
Groschopp 47755 specsheet
This document provides specifications for an AC 1 Ph 6540 TENV motor with a PS 1900 20:1 ratio gearbox. The motor operates at 115V 60Hz and produces 152.9 rpm and 13.2 lb-in of torque at 0.62 amps and 24 watts of output. Efficiency is highest at 67.7% for the gearbox, 49.4% for the motor, and 33.5% for the overall system. Startup current is 1.32 amps producing 11.6 lb-in of torque.
Recommended
Groschopp 47748 specsheet
This document provides specifications for an AC 3 Ph 6540 TENV motor with a PS 1900 120:1 ratio gearbox. The motor runs at 1460 rpm on 230V 60Hz power and is rated for 12.2 rpm output speed, 64.9 lb-in of torque, and 0.19 amps of current. Breakdown and pullup tests were also run showing lower speeds and higher torques than the rating. Efficiency is highest for the gearbox at 48.3% and lowest for the overall system at 19.6%. Startup requires 0.39 amps and generates 155.64 lb-in of torque. A graph shows efficiency decreases with speed.
Groschopp 47740 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a 230V 60Hz voltage and 1460rpm speed that is connected to a PS1900 10:1 ratio gearbox. The motor has a rated speed of 146.2rpm, torque of 8.5lb-in, and current of 0.19amps at an output of 15 watts and 0.0198HP. Breakdown and pullup tests were also run showing speed and torque values. Efficiency levels of the gearbox, motor, and system are listed along with start/stall current and torque conditions. A graph shows efficiency at varying torque and speed levels for cold and hot operation.
Groschopp 47727 specsheet
This document provides specifications for an AC 3 Phase 6540 TEFC motor with a PS 1900 10:1 ratio gearbox. Key specifications include a voltage of 230V 60Hz, speed of 1450 rpm, output speed of 145.4 rpm at 11.6 lb-in of torque drawing 0.25 amps of current. The motor has a continuous duty cycle and system efficiency of 30.8%. Startup requires 0.49 amps producing 21.43 lb-in of torque. A graph shows efficiency curves against torque and speed for cold and hot operation. The motor is sold and serviced by Electromate.
Groschopp 47777 specsheet
This document provides specifications for a small AC motor including its voltage, speed, gearbox ratio, efficiency ratings at various torques and speeds, and contact information for the supplier. The motor runs at 1500 rpm on 230v 60Hz power, with a 10:1 ratio gearbox. It produces 149.6 rpm and 6.1 lb-in of torque under normal operating conditions and has a continuous duty cycle with peak efficiency of 22.9%.
Groschopp 47734 specsheet
The document provides specifications for an AC 3 Phase 6540 TEFC motor with a 230V 60Hz voltage and 1450rpm speed connected to a PS1900 90:1 ratio gearbox. The motor has a rated output of 16.2rpm at 71.4lb-in of torque drawing 0.25amps. Charts show torque and efficiency curves across a range of speeds.
Groschopp 47775 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor with a PS 1900 20:1 ratio gearbox. Key details include:
- Motor operates at 115V 60Hz and produces 74.1 rpm and 16.1 lb-in of torque drawing 0.64 amps of current.
- Gearbox has a 20:1 ratio, so motor output is increased to 1480 rpm.
- Charts show torque and speed characteristics along with efficiency at varying loads both when cold and hot.
Groschopp 47785 specsheet
This document provides specifications for a motor including its voltage, speed, gearbox ratio, product ID number, ratings for speed, torque, current, output, and duty cycle. It also includes efficiency percentages for the gearbox, motor, and system, as well as start/stall conditions. Additionally, it shows torque and speed curves along with efficiency versus torque for both cold and hot operating conditions. The motor is serviced and sold by Electromate.
Groschopp 47755 specsheet
This document provides specifications for an AC 1 Ph 6540 TENV motor with a PS 1900 20:1 ratio gearbox. The motor operates at 115V 60Hz and produces 152.9 rpm and 13.2 lb-in of torque at 0.62 amps and 24 watts of output. Efficiency is highest at 67.7% for the gearbox, 49.4% for the motor, and 33.5% for the overall system. Startup current is 1.32 amps producing 11.6 lb-in of torque.
Groschopp 66031 specsheet
This document provides specifications for an AC 3 Phase 8040 TENV motor with a PL 7300 90:1 ratio gearbox. Key specifications include a voltage of 230V 60Hz, speed of 1540rpm, output of 17.2rpm and 242.5lb-in of torque. Charts show torque and efficiency at varying speeds when the motor is cold and hot. The motor has a continuous duty cycle and system efficiency of 43.4%.
Groschopp 47754 specsheet
This document provides specifications for a 1 Ph 6540 TENV AC motor with a PS 1900 15:1 ratio gearbox. The motor runs at 3060 rpm single phase and 115v. Key specifications include an output speed of 203.8 rpm, torque of 10.9 lb-in, current of 0.62 amps, and power output of 26 watts or 0.0352 HP. Startup current is 1.32 amps with 9.63 lb-in of torque. Efficiency levels are provided for the gearbox, motor, and overall system at various torque and speed levels, with peak efficiencies of 74.6%, 49.4%, and 36.9%, respectively.
Groschopp 66372 specsheet
This document provides specifications for a small AC motor including its voltage, speed, gearbox ratio, and performance metrics like torque and efficiency at various speeds. It lists the motor's rating, breakdown torque, pullup torque, duty cycle, and start/stall conditions. Charts show how torque, speed, and efficiency vary depending on the load. The motor is powered by 115V AC, has a maximum speed of 1510rpm, and a 5.1:1 gear ratio. It can deliver up to 9.7lb-in of torque and has peak efficiencies of 47.8% for the motor and 21.1% for the overall system.
Groschopp 74540 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 50Hz voltage and 1320rpm speed that is connected to an RA 2600T 15:1 ratio gearbox. The motor has a rated speed of 87.7rpm, torque of 61.7lb-in, and current of 0.75amps at 64watts and 0.0859HP output. At breakdown, the speed is 45.0rpm with 155.09lb-in torque, and at pullup the speed is 0.0rpm with 142.76lb-in torque. The gearbox, motor, and system efficiencies are 65.7%, 54.3%, and 35.7% respectively.
Groschopp 47749 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a PS 1900 180:1 ratio gearbox. Key specifications include a voltage of 230V 60Hz, speed of 1460 rpm, output of 0.0135 HP at 8.1 rpm, and torque measurements for startup, operating, and breakdown conditions. Charts show efficiency curves for the gearbox, motor, and overall system at varying torque and speed levels.
Groschopp 66025 specsheet
This document provides specifications for an AC 3 Phase 8040 TENV motor with a PL 7300 10:1 ratio gearbox. Key specifications include a voltage of 230V 60Hz, speed of 154.8 rpm, torque of 27.9 lb-in, current of 0.40 amps, output of 51 watts, and efficiency between 60.2-74.5% depending on the motor, gearbox, or system. Performance charts show torque and speed values at various loads as well as efficiency curves for cold and hot operating conditions.
Groschopp 66374 specsheet
This document provides specifications for an AC motor with a 20:1 gearbox. The motor runs on 115V 60Hz power and has a no-load speed of 1510rpm. Key specifications include an output speed of 75.4rpm, torque of 22.4lb-in, and efficiency ratings for the gearbox, motor, and overall system under various load conditions. Performance data is provided showing speed, torque, current and efficiency at different operating points. The motor is rated for continuous duty and has a startup current of 1.34amps and stall torque of 21.16lb-in.
Groschopp 47778 specsheet
This document provides specifications for a small AC motor including its voltage, speed, gearbox ratio, product ID number, ratings for speed, torque, current and output at various loads, duty cycle, and efficiency percentages for the gearbox, motor and system. It also lists start/stall current and torque values, efficiency and speed curves, and contact information for the company selling and servicing the motor.
Groschopp 47750 specsheet
This document provides specifications for a AC 3 Ph 6540 TENV motor with a 240:1 ratio gearbox. Key details include:
- The motor operates at 230V 60Hz and 1460 rpm, with the gearbox providing an output of 6.4 rpm and 125 lb-in of torque under normal operating conditions.
- Under maximum "breakdown" and "pullup" conditions, the motor can output speeds of 3.9 rpm and 1.7 rpm with torques of 377.1 lb-in and 340.1 lb-in respectively.
- The motor has a continuous duty cycle with efficiencies of 38% for the motor alone and 22.8% for the overall system under normal
Groschopp 47745 specsheet
This document provides specifications for a AC 3 Ph 6540 TENV motor with a 230V 60Hz voltage and 1460 rpm speed that is connected to a PS 1900 45:1 ratio gearbox. The motor has a rated output of 32.5 rpm, 27.7 lb-in of torque and 0.19 amps of current. Charts show the motor's torque and speed breakdown, pullup, efficiency at various torque levels, and start/stall conditions. The motor is sold and serviced by Electromate.
Groschopp 66048 specsheet
This document provides specifications for an AC 3 Phase 8060 TENV motor with a 5:1 ratio PL 7300 gearbox. Key specifications include a rated speed of 312 RPM and torque of 20.2 lb-in, with an output of 74 watts and 0.0998 HP. Breakdown and pullup torque and speed values are also listed. The motor has a continuous duty cycle and system efficiency of 48.9%. Start/stall current and torque conditions are 1.63 amps and 43.66 lb-in. A graph shows torque, speed, and efficiency curves from cold to hot operation. The motor is sold and serviced by Electromate.
Biography
This document contains short biographies of six notable Salvadoran or Salvadoran-connected individuals:
1) Singer Álvaro Torres, known for songs like "Chiquita Mia" and duets with Mexican artists.
2) Archbishop Óscar Romero, who served as a bishop in El Salvador and was assassinated in 1980.
3) Poet Claudia Lars, one of El Salvador's most prominent female poets.
4) Artist Fernando Llort, who studied architecture and philosophy in El Salvador and Europe.
5) Actress and singer Selena Gomez, who was born in Texas to Salvadoran and Italian parents and began her career on Bar
Reprocucción de las células
Cada 5 minutos, el número de bacterias se duplica. Después de 24 horas (1440 minutos), el número de bacterias será 2 elevado a 288, lo que significa que habrá un número extremadamente grande de bacterias.
CHL: la arroba y SlideShare
El documento habla sobre la historia y uso actual de la arroba (@) y del sitio web SlideShare. Explica que la arroba originalmente se usaba como una unidad de masa en España y que ahora se usa principalmente en direcciones de correo electrónico y redes sociales. También describe que SlideShare es un sitio para compartir presentaciones y que fue lanzado en 2006, recibiendo millones de visitas mensuales antes de ser adquirido por LinkedIn en 2012.
La célula
La célula es la unidad básica de todo ser vivo. Según la teoría celular, todos los organismos están compuestos de células, y todas las células derivan de otras precedentes. Se cree que la vida surgió cuando moléculas inorgánicas se transformaron en orgánicas bajo ciertas condiciones ambientales, interactuando y formando estructuras más complejas como los coacervados de Oparin. Estas estructuras eventualmente desarrollaron la capacidad de auto-organizarse y perpetuarse, dando origen a las primer
Впервые в FollowMe 6.2
Впервые в FollowMe версии 6.2 применены технологии предотвращения утечек конфиденциальной информации (Data Leak Prevention, DLP), а также усилена поддержка организаций с разветвлённой сетью филиалов.
Закажите аудит печати у "Никотех"
Зачем нужно периодически проводить аудит печати в офисе и почему стоит доверить его "Никотех".
More Related Content
What's hot
Groschopp 66031 specsheet
This document provides specifications for an AC 3 Phase 8040 TENV motor with a PL 7300 90:1 ratio gearbox. Key specifications include a voltage of 230V 60Hz, speed of 1540rpm, output of 17.2rpm and 242.5lb-in of torque. Charts show torque and efficiency at varying speeds when the motor is cold and hot. The motor has a continuous duty cycle and system efficiency of 43.4%.
Groschopp 47754 specsheet
This document provides specifications for a 1 Ph 6540 TENV AC motor with a PS 1900 15:1 ratio gearbox. The motor runs at 3060 rpm single phase and 115v. Key specifications include an output speed of 203.8 rpm, torque of 10.9 lb-in, current of 0.62 amps, and power output of 26 watts or 0.0352 HP. Startup current is 1.32 amps with 9.63 lb-in of torque. Efficiency levels are provided for the gearbox, motor, and overall system at various torque and speed levels, with peak efficiencies of 74.6%, 49.4%, and 36.9%, respectively.
Groschopp 66372 specsheet
This document provides specifications for a small AC motor including its voltage, speed, gearbox ratio, and performance metrics like torque and efficiency at various speeds. It lists the motor's rating, breakdown torque, pullup torque, duty cycle, and start/stall conditions. Charts show how torque, speed, and efficiency vary depending on the load. The motor is powered by 115V AC, has a maximum speed of 1510rpm, and a 5.1:1 gear ratio. It can deliver up to 9.7lb-in of torque and has peak efficiencies of 47.8% for the motor and 21.1% for the overall system.
Groschopp 74540 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 50Hz voltage and 1320rpm speed that is connected to an RA 2600T 15:1 ratio gearbox. The motor has a rated speed of 87.7rpm, torque of 61.7lb-in, and current of 0.75amps at 64watts and 0.0859HP output. At breakdown, the speed is 45.0rpm with 155.09lb-in torque, and at pullup the speed is 0.0rpm with 142.76lb-in torque. The gearbox, motor, and system efficiencies are 65.7%, 54.3%, and 35.7% respectively.
Groschopp 47749 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a PS 1900 180:1 ratio gearbox. Key specifications include a voltage of 230V 60Hz, speed of 1460 rpm, output of 0.0135 HP at 8.1 rpm, and torque measurements for startup, operating, and breakdown conditions. Charts show efficiency curves for the gearbox, motor, and overall system at varying torque and speed levels.
Groschopp 66025 specsheet
This document provides specifications for an AC 3 Phase 8040 TENV motor with a PL 7300 10:1 ratio gearbox. Key specifications include a voltage of 230V 60Hz, speed of 154.8 rpm, torque of 27.9 lb-in, current of 0.40 amps, output of 51 watts, and efficiency between 60.2-74.5% depending on the motor, gearbox, or system. Performance charts show torque and speed values at various loads as well as efficiency curves for cold and hot operating conditions.
Groschopp 66374 specsheet
This document provides specifications for an AC motor with a 20:1 gearbox. The motor runs on 115V 60Hz power and has a no-load speed of 1510rpm. Key specifications include an output speed of 75.4rpm, torque of 22.4lb-in, and efficiency ratings for the gearbox, motor, and overall system under various load conditions. Performance data is provided showing speed, torque, current and efficiency at different operating points. The motor is rated for continuous duty and has a startup current of 1.34amps and stall torque of 21.16lb-in.
Groschopp 47778 specsheet
This document provides specifications for a small AC motor including its voltage, speed, gearbox ratio, product ID number, ratings for speed, torque, current and output at various loads, duty cycle, and efficiency percentages for the gearbox, motor and system. It also lists start/stall current and torque values, efficiency and speed curves, and contact information for the company selling and servicing the motor.
Groschopp 47750 specsheet
This document provides specifications for a AC 3 Ph 6540 TENV motor with a 240:1 ratio gearbox. Key details include:
- The motor operates at 230V 60Hz and 1460 rpm, with the gearbox providing an output of 6.4 rpm and 125 lb-in of torque under normal operating conditions.
- Under maximum "breakdown" and "pullup" conditions, the motor can output speeds of 3.9 rpm and 1.7 rpm with torques of 377.1 lb-in and 340.1 lb-in respectively.
- The motor has a continuous duty cycle with efficiencies of 38% for the motor alone and 22.8% for the overall system under normal
Groschopp 47745 specsheet
This document provides specifications for a AC 3 Ph 6540 TENV motor with a 230V 60Hz voltage and 1460 rpm speed that is connected to a PS 1900 45:1 ratio gearbox. The motor has a rated output of 32.5 rpm, 27.7 lb-in of torque and 0.19 amps of current. Charts show the motor's torque and speed breakdown, pullup, efficiency at various torque levels, and start/stall conditions. The motor is sold and serviced by Electromate.
Groschopp 66048 specsheet
This document provides specifications for an AC 3 Phase 8060 TENV motor with a 5:1 ratio PL 7300 gearbox. Key specifications include a rated speed of 312 RPM and torque of 20.2 lb-in, with an output of 74 watts and 0.0998 HP. Breakdown and pullup torque and speed values are also listed. The motor has a continuous duty cycle and system efficiency of 48.9%. Start/stall current and torque conditions are 1.63 amps and 43.66 lb-in. A graph shows torque, speed, and efficiency curves from cold to hot operation. The motor is sold and serviced by Electromate.
What's hot (11)
Viewers also liked
Biography
This document contains short biographies of six notable Salvadoran or Salvadoran-connected individuals:
1) Singer Álvaro Torres, known for songs like "Chiquita Mia" and duets with Mexican artists.
2) Archbishop Óscar Romero, who served as a bishop in El Salvador and was assassinated in 1980.
3) Poet Claudia Lars, one of El Salvador's most prominent female poets.
4) Artist Fernando Llort, who studied architecture and philosophy in El Salvador and Europe.
5) Actress and singer Selena Gomez, who was born in Texas to Salvadoran and Italian parents and began her career on Bar
Reprocucción de las células
Cada 5 minutos, el número de bacterias se duplica. Después de 24 horas (1440 minutos), el número de bacterias será 2 elevado a 288, lo que significa que habrá un número extremadamente grande de bacterias.
CHL: la arroba y SlideShare
El documento habla sobre la historia y uso actual de la arroba (@) y del sitio web SlideShare. Explica que la arroba originalmente se usaba como una unidad de masa en España y que ahora se usa principalmente en direcciones de correo electrónico y redes sociales. También describe que SlideShare es un sitio para compartir presentaciones y que fue lanzado en 2006, recibiendo millones de visitas mensuales antes de ser adquirido por LinkedIn en 2012.
La célula
La célula es la unidad básica de todo ser vivo. Según la teoría celular, todos los organismos están compuestos de células, y todas las células derivan de otras precedentes. Se cree que la vida surgió cuando moléculas inorgánicas se transformaron en orgánicas bajo ciertas condiciones ambientales, interactuando y formando estructuras más complejas como los coacervados de Oparin. Estas estructuras eventualmente desarrollaron la capacidad de auto-organizarse y perpetuarse, dando origen a las primer
Впервые в FollowMe 6.2
Впервые в FollowMe версии 6.2 применены технологии предотвращения утечек конфиденциальной информации (Data Leak Prevention, DLP), а также усилена поддержка организаций с разветвлённой сетью филиалов.
Закажите аудит печати у "Никотех"
Зачем нужно периодически проводить аудит печати в офисе и почему стоит доверить его "Никотех".
Pendekatan Konseling Gestalt
ini merupakan pendekatan konseling yang cukup terkenal dengan tekniknya kursi kosong
Agribusiness market analysis
This chapter brings together the basic ideas of consumer demand, and the production and cost concerns. This chapter will enable students to understand how price is determined in a market and the role of price.
Feminisme dan gerakan kesetaraan gender edit
Dokumen tersebut membahas tentang feminisme dan gerakan kesetaraan gender. Ia menjelaskan definisi feminisme, gelombang feminisme, teori-teori yang mendasari feminisme seperti teori nature dan nurture, serta bentuk-bentuk diskriminasi gender seperti stereotip dan subordinasi. Dokumen ini juga membahas konsep gender dan perbedaannya dengan jenis kelamin.
Как «отбиваются» затраты на безопасную печать
Затраты управление печатью при правильном подходе достаточно скоро окупятся, и далее система будет регулярно возвращать в бюджет средства, которые до сих пор «вылетали в трубу».
Подробнее о решениях «Никотех» для безопасной печати – www.nicotech.ru/products/solutions/solutions.php?SECTION_ID=50
variables cualitativas
Este documento trata sobre las variables cualitativas o atributos. Explica que son variables que toman valores nominales como nombres o etiquetas en lugar de valores numéricos, como el color o la raza. Aunque no son cuantificables, pueden codificarse numéricamente para usarse en modelos matemáticos asignando un número a cada valor posible. Las variables cualitativas incluyen variables nominales, ordinales y de respuesta múltiple. Algunos ejemplos son el color del pelo, el nombre o el sabor de los alimentos.
8 pasos para lograr tu exito
¿Quieres explotar el potencial de Internet, pero no sabes cómo hacerlo?
¿Quieres trabajar desde casa y ser tu propio jefe?
¿Alguna vez has soñado establecer el 100 % en un sistema de ventas totalmente automatizado que trabaja para ti mientras estás de vacaciones con tu familia en el otro lado del mundo?
¿Te gusta la idea de un ingreso seguro mensual residual con potencial ilimitado?
¡Si tu respuesta es SI, entonces has llegado al lugar adecuado!
suscribete a mi canal para aprender como hacerlo todo en piloto automatico atravez de internet http://www.dreamlatinoteam.com/dlt/pagina-de-contacto/
Cultivation, collection and processing of crude drugs
This document provides information on the cultivation and processing of medicinal plants. It discusses topics such as advantages and disadvantages of cultivation, methods of propagation (sexual and asexual), nursery preparation, factors affecting cultivation, pest control, collection and processing of crude drugs. The processing involves harvesting, drying methods, packing and storage/preservation of crude drugs. Asexual propagation techniques like cutting, layering and grafting are also explained.
Viewers also liked (18)
Печать под контролем – взгляд со стороны пользователя (Дмитрий Иншаков, ИТ-д...
Печать под контролем – взгляд со стороны пользователя (Дмитрий Иншаков, ИТ-д...
1 04+บาลีไวยกรณ์+วจีวิภาค+ภาคที่+2+อาขยาต+และ+กิตก์
1 04+บาลีไวยกรณ์+วจีวิภาค+ภาคที่+2+อาขยาต+และ+กิตก์
Cultivation, collection and processing of crude drugs
Cultivation, collection and processing of crude drugs
Similar to Groschopp 47747 specsheet
Groschopp 47740 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a 230V 60Hz voltage and 1460rpm speed that is connected to a PS1900 10:1 ratio gearbox. The motor has a rated speed of 146.2rpm, torque of 8.5lb-in, and current of 0.19amps at an output of 15 watts and 0.0198HP. Breakdown and pullup tests were also run showing speed and torque values. Efficiency levels of the gearbox, motor, and system are listed along with continuous duty cycle and start/stall current and torque conditions. A graph shows efficiency at varying torque and speed levels for cold and hot operation.
Groschopp 47740 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a 230V 60Hz voltage and 1460rpm speed that is connected to a PS1900 10:1 ratio gearbox. The motor has a rated speed of 146.2rpm, torque of 8.5lb-in, and current of 0.19amps at an output of 15 watts and 0.0198HP. Breakdown and pullup tests were also run showing speed and torque values. Efficiency levels of the gearbox, motor, and system are listed along with continuous duty cycle and start/stall current and torque conditions. A graph shows efficiency at varying torque and speed levels for cold and hot operation.
Groschopp 47748 specsheet
This document provides specifications for an AC 3 Ph 6540 TENV motor with a PS 1900 120:1 ratio gearbox. The motor operates at 230V 60Hz with a no-load speed of 12.2rpm, torque of 64.9lb-in, and current of 0.19amps. Under full load conditions, the motor produces 9watts of power and 0.0125HP at an efficiency of 19.6% for the overall system. Startup conditions require 0.39amps and produce 155.64lb-in of torque. A graph shows efficiency peaks between 60-100rpm.
Groschopp 47734 specsheet
The document provides specifications for an AC 3 Phase 6540 TEFC motor with a 230V 60Hz voltage and 1450rpm speed connected to a PS1900 90:1 ratio gearbox. The motor has a rated output of 16.2rpm at 71.4lb-in of torque drawing 0.25amps. Charts show torque and efficiency curves across a range of speeds.
Groschopp 47749 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a PS 1900 180:1 ratio gearbox. Key specifications include a voltage of 230V 60Hz, speed of 1460 rpm, output of 0.0135 HP at 8.1 rpm, and torque measurements for startup, operating, and breakdown conditions. Charts show efficiency curves for the gearbox, motor, and overall system at varying torque and speed levels.
Groschopp 47745 specsheet
This document provides specifications for a AC 3 Ph 6540 TENV motor with a 230V 60Hz voltage and 1460 rpm speed that is connected to a PS 1900 45:1 ratio gearbox. The motor has a rated output of 32.5 rpm, 27.7 lb-in of torque and 0.19 amps of current. Charts show the motor's torque and efficiency at varying speeds when cold and hot.
Groschopp 47779 specsheet
This document provides specifications for a small AC motor including its voltage, speed, gearbox ratio, product ID number, ratings for speed, torque, current and output. It also details startup, stall, efficiency and speed vs torque performance curves for the motor both cold and hot. The motor is to be continuously run and is sold and serviced by Electromate.
Groschopp 47751 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a PS 1900 320:1 ratio gearbox. The motor runs at 1460 rpm on 230V 60Hz power and is rated for 4.7 rpm output speed, 125 lb-in of torque, and 0.19 amps of current. Charts show torque and efficiency at varying speeds for both cold and hot operating conditions. The gearbox and motor each have around 40% efficiency while the system efficiency is 16%.
Groschopp 47751 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a PS 1900 320:1 ratio gearbox. The motor runs at 1460 rpm on 230V 60Hz power and is rated for 4.7 rpm output speed, 125 lb-in of torque, and 0.19 amps of current. Charts show torque and efficiency at varying speeds for both cold and hot operating conditions. The gearbox and motor efficiencies are 40.8% and 39.2% respectively, yielding a system efficiency of 16.0%.
Groschopp 47750 specsheet
This document provides specifications for a AC 3 Ph 6540 TENV motor with a 240:1 ratio gearbox. Key details include:
- The motor operates at 230V 60Hz and 1460 rpm, with the gearbox providing an output of 6.4 rpm and 125 lb-in of torque under normal operating conditions.
- Under maximum "breakdown" and "pullup" loads, the motor can provide up to 3.9 rpm and 377 lb-in of torque, or 1.7 rpm and 340 lb-in of torque respectively.
- Efficiency is highest at full load, with the gearbox, motor, and overall system achieving up to 60.1%, 38.0%, and
Groschopp 47737 specsheet
This document provides specifications for an AC 3 Phase 6540 TEFC motor with a 240:1 ratio gearbox. Key specifications include a voltage of 230V, speed of 1450 rpm, output of 0.0132 HP, maximum torque of 480.26 lb-in, and continuous duty cycle. Performance charts show efficiency levels at varying torques and speeds both when cold and hot.
Groschopp 47737 specsheet
This document provides specifications for an AC 3 Phase 6540 TEFC motor with a 240:1 ratio gearbox. Key specifications include a voltage of 230V, speed of 1450 rpm, output of 0.0132 HP, maximum torque of 480.26 lb-in, and continuous duty cycle. Performance charts show efficiency levels at varying torques and speeds both when cold and hot.
Groschopp 47737 specsheet
This document provides specifications for an AC 3 Phase 6540 TEFC motor with a 240:1 ratio gearbox. Key specifications include a voltage of 230V, speed of 1450 rpm, output of 0.0132 HP, maximum torque of 480.26 lb-in, and continuous duty cycle. Performance charts show efficiency levels at varying torques and speeds both when cold and hot.
Groschopp 47726 specsheet
This document provides specifications for an AC 3 Phase 6540 TEFC motor with a 5:1 ratio gearbox. Key details include:
- The motor operates at 230V 60Hz and 1450 rpm, with the geared output running at 290.8 rpm.
- At full load, the motor outputs 21 watts of power at 0.0281 horsepower.
- Charts show torque and efficiency at varying speeds both when cold and hot.
- The motor has a continuous duty cycle and maximum current of 0.49 amps during start or stall conditions.
Groschopp 47781 specsheet
This document provides specifications for a small AC motor including its voltage, speed, gearbox ratio, and performance metrics like torque and efficiency at varying speeds. It lists the motor's rating as 149.3 rpm and 7.9 lb-in of torque drawing 0.33 amps of current. Charts show its torque and efficiency characteristics both when cold and hot.
Groschopp 47776 specsheet
This document provides specifications for a small AC motor including its voltage, speed, gearbox ratio, and performance metrics like torque and efficiency at varying speeds. It lists the motor as a 1 Ph 6540 TENV AC motor running at 230v 60Hz with a 1500 rpm speed and 5:1 ratio gearbox. Charts show its torque, speed, current and efficiency at different loads both cold and hot.
Groschopp 47786 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a 5:1 ratio gearbox. Key specifications include a no-load speed of 542 rpm, maximum torque of 15.34 lb-in, start/stall current of 1 amp, and maximum efficiencies of 82.8% for the gearbox and 51.1% for the motor. Performance curves show speed, torque, and efficiency over a range of torques from 0 to 480 rpm.
Groschopp 47782 specsheet
This document provides specifications for a 1 phase AC motor with a 15:1 ratio gearbox. The motor runs at 1490 rpm and 230V 60Hz. Key specifications include an operating speed of 99.5 rpm, torque of 11.8 lb-in, current of 0.33 amps, and output of 14 watts and 0.0187 HP. Breakdown and pullup torque and speed are also listed. The motor has continuous duty cycle and system efficiency of 21.5%. Start/stall current and torque are provided. A graph shows torque, speed, and efficiency at varying RPMs for both cold and hot operation. The motor is sold and serviced by Electromate.
Groschopp 47739 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a 5:1 ratio PS 1900 gearbox. Key specifications include a voltage of 230V 60Hz, speed of 1460 rpm, output speed of 292.4 rpm, output torque of 4.5 lb-in, current of 0.19 amps, output power of 16 watts, and output horsepower of 0.0208 HP. Charts show torque and speed curves from cold start up to continuous running, with efficiency ranging from 40.6% for the motor to 32.5% for the overall system.
Groschopp 47739 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a 5:1 ratio PS 1900 gearbox. Key specifications include a voltage of 230V 60Hz, speed of 1460 rpm, output speed of 292.4 rpm, output torque of 4.5 lb-in, current of 0.19 amps, output power of 16 watts, and output horsepower of 0.0208 HP. Charts show torque and speed curves from cold start up to continuous running, with efficiency ranging from 40.6% for the motor to 32.5% for the overall system.
Similar to Groschopp 47747 specsheet (20)
More from Electromate
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
The document discusses an automated screw thread quality checking solution using SMAC LAR55 actuators. It allows 100% inspection of screw threads to check for issues like oversizing, cross-threading, depth, and pitch. This can help automakers meet higher quality standards by eliminating defective parts and providing immediate feedback. The LAR55's precision Z-theta motion makes it suitable for automatically checking screw threads.
An overview of the various kinematic models in both parallel and serial robot...
This document provides an overview of kinematic models for parallel and serial robotic mechanisms and their suitability for precision applications. It introduces Ilian Bonev, a professor at École de technologie supérieure who is an expert in parallel robots and precision robotics. It then describes some parallel robots that have been developed at the Control and Robotics Laboratory including ones for medical, manufacturing, and research applications. The document concludes with sections on robot calibration methods and the differences between serial and parallel mechanisms.
Galil motion control robotic symposium presentation-linear motion from non-li...
The document discusses non-linear robotic motion control solutions. It describes how Galil Motion Control provides controllers for various types of non-linear robots like SCARA and delta robots. It covers topics like selecting the robot topology, designing each joint, motor selection, forward and inverse kinematics equations, vibration reduction techniques, and examples of implementing motion control for SCARA robots.
Advanced motion controls robotics symposium presentation-open standard tools ...
This document discusses the development of control software for a linear delta robot used in 3D printing. It describes using PLCopen function blocks and XML files to create reusable software components for robot kinematics and handling G-code from slicing programs. Function block diagrams are created to process G-code, set coordinate systems, and represent the overall project logic. The solution involves creating user-defined function blocks to handle the robot's inverse kinematics and translate G-code commands into motions.
Maxon motor ag robotic symposium presentation-impedance control overview and ...
The document discusses impedance control, an approach to robot control that models mechanical systems as electrical circuits using impedance. It defines electrical and mechanical impedance analogously and describes how components like resistors, inductors, and capacitors correspond to dampers, masses, and springs physically. The document outlines applications of impedance control and emphasizes the importance of selecting low-inertia motors, high-efficiency gears, and fast, accurate sensors and controllers. Overall, the document argues that impedance control requires creative engineering of mechanical designs and electrical components.
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
The document discusses how motor design impacts the optimization of robotic systems. It explains that frameless motors can enable smaller, lighter and faster robots through their direct drive capabilities and high torque density. The document also covers various motor topologies and important concepts like torque constant, motor size constant, and how they relate to continuous torque capacity, efficiency and losses. Application examples discussed include collaborative robots, surgical robots, and mobile robots.
Harmonic drive llc robotics symposium presentation-designing from the inside ...
The document discusses defining robot performance requirements and how customized solutions from Harmonic Drive can help meet those requirements. It provides an overview of Harmonic Drive's product line and gear technologies, then discusses how mechanical modifications and performance customizations can be made to their gear components and systems to optimize robots for specific design requirements and applications. Customizations like increased accuracy, stiffness, torque properties and materials can be made, with varying levels of difficulty and cost implications discussed.
Thomson Linear Dual Shaft Rail 2DA Modular Specs
This document provides specifications and dimensional drawings for Thomson Industries' Dual Shaft Rail linear guides with modular carriages. It includes part numbers, dimensions, load ratings and descriptions of the components. Linear guides use dual linear race shaft rails and modular carriages with open type Super Smart Ball Bushings. They are used in continuously supported applications requiring rigidity and are adaptable to any drive system.
Thomson Linear 2DA QuickSlide System with Brake
This document provides specifications for Thomson Industries' 2DA QuickSlide system with brake, including:
- It offers manual locking with infinite positioning, no carriage surface deflection when locked, and immediate availability in common sizes.
- The locking mechanism does not increase load on the bearing and allows zero axial movement during locking.
- It provides a fully supported dual shaft assembly for maximum rigidity and unlimited travel.
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
This document contains specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, part numbers, load ratings and descriptions of the components. The linear guides use a double shaft and welded web design for improved torque strength and deflection characteristics. They are designed to move medium loads with low friction and are commonly used when bridging gaps.
Thomson Linear RoundRail 1VC Double End Supported Specs
The document provides specifications for various FluoroNyliner linear guide components including:
- Pillow blocks, twin pillow blocks, shaft end support blocks, and mounting table tops for different size linear guides ranging from 0.375 to 1.5 inches in diameter.
- It lists the part numbers, dimensions, materials, weights, and other specifications for each component.
- It also includes an illustration of a double end supported linear guide system with pillow blocks, shafts, end supports, and a size B mounting table top.
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
This document provides specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, load capacity information, and part numbers for various components of the 2CA linear guide, which features a flanged carriage design and double linear race shaft for improved torque and deflection characteristics. Configuration and installation details are also listed.
Thomson Linear RoundRail Twin Shaft Web 2CA
The document provides specifications for Thomson RoundRail linear guides and components. It includes dimensions, features, and part numbering for twin shaft web linear guides in both vertical and horizontal configurations ranging from 0.5 to 1 inch in diameter. Load capacity charts are provided for different guide sizes and configurations that can support loads between 165 to 3000 pounds depending on the model. Maximum guide lengths are listed as 72 inches and engineering calculations for shaft deflection are also noted.
Thomson Linear RoundRail 1VC Double Unsupported Specs
The document contains specifications for various FluoroNyliner linear guide parts, including dimensions, part numbers, materials, load ratings, and performance notes. It lists 14 different linear guide parts with nominal diameters ranging from 0.375 to 1.5 inches. For each part, it provides dimensions for components like bearing blocks, carriages, and table tops. It also includes general information on specifying linear guides and product notes on materials and lubrication.
Thomson Linear WhisperTrak Actuators
The Thomson WhisperTrak electric linear actuator offers a compact, quiet, and durable solution for applications requiring linear motion. It is particularly well-suited for personal mobility, medical, and rehabilitation equipment due to its small size and silent operation. The actuator provides reliable, maintenance-free movement and has an IP67 rating, making it protected against water and dust. Its flexibility and high performance in a small package make it suitable for a wide range of industries.
Thomson T-Series Profile Rail
The document provides information on the T-Series Ball Profile Rail from Thomson, including:
- It is lightweight, highly flexible, and forgiving, making it suitable for applications with poor misalignment.
- It has a low cost of installation as it can be mounted directly to non-machined bases without special tools.
- It offers industry standard dimensions and dimensions interchangeable with other rail brands, allowing for easy replacement.
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
This document provides specifications for various bellows that can be used to protect slides and shafts. It lists different part numbers for bellows with a range of nominal shaft diameters from 1/4 to 1 1/2 inches. The bellows are made of polyester cover and PVC stiffeners. Dimensions such as length, width, and height are provided for each part number. Some bellows are single shaft while others are dual shaft or for horizontal vs vertical systems. Each bellows comes with attachment pieces like Velcro or mounting brackets.
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
The document provides specifications for Danaher Motion's dual shaft rail linear guides with integrated carriages. It includes dimensions, load ratings, dynamic capacities, and part numbering for the 2DA series linear guides available in nominal diameters of 0.5, 0.75, and 1.0 inches. Both full and short length carriage options are detailed along with components, material specifications, and the supplier contact information.
Thomson Linear RoundRail Continuous Support 1PC Specs
This document provides specifications for various linear guide assemblies with table tops from Thomson Industries. It includes dimensions, part numbers, load ratings and limit data for single rail linear guides with sizes ranging from M12 to M40 diameter in configurations with 4 pillow blocks, 2 twin pillow blocks or no pillow blocks and size E or F table tops. Mounting details and specifications are provided for the various components including rails, pillow blocks and table tops.
Thomson Linear RoundRail Continuous Support 1PB Specs
The document contains specifications for various continuously supported linear guide assemblies and their components. It lists part numbers, dimensions, load ratings, and other technical specifications for linear guides, support rails, pillow blocks, and bearings. Materials include aluminum alloys and bearings include ball bushings. Linear guides are specified by part number plus length and provide continuous support for applications requiring rigidity.
More from Electromate (20)
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
An overview of the various kinematic models in both parallel and serial robot...
An overview of the various kinematic models in both parallel and serial robot...
Galil motion control robotic symposium presentation-linear motion from non-li...
Galil motion control robotic symposium presentation-linear motion from non-li...
Advanced motion controls robotics symposium presentation-open standard tools ...
Advanced motion controls robotics symposium presentation-open standard tools ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Recently uploaded
Skybuffer SAM4U tool for SAP license adoption
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
Ocean Lotus cyber threat actors represent a sophisticated, persistent, and politically motivated group that poses a significant risk to organizations and individuals in the Southeast Asian region. Their continuous evolution and adaptability underscore the need for robust cybersecurity measures and international cooperation to identify and mitigate the threats posed by such advanced persistent threat groups.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Project Management Semester Long Project - Acuity
Acuity is an innovative learning app designed to transform the way you engage with knowledge. Powered by AI technology, Acuity takes complex topics and distills them into concise, interactive summaries that are easy to read & understand. Whether you're exploring the depths of quantum mechanics or seeking insight into historical events, Acuity provides the key information you need without the burden of lengthy texts.
Digital Marketing Trends in 2024 | Guide for Staying Ahead
https://www.wask.co/ebooks/digital-marketing-trends-in-2024
Feeling lost in the digital marketing whirlwind of 2024? Technology is changing, consumer habits are evolving, and staying ahead of the curve feels like a never-ending pursuit. This e-book is your compass. Dive into actionable insights to handle the complexities of modern marketing. From hyper-personalization to the power of user-generated content, learn how to build long-term relationships with your audience and unlock the secrets to success in the ever-shifting digital landscape.
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Columbus Data & Analytics Wednesdays - June 2024
Columbus Data & Analytics Wednesdays, June 2024 with Maria Copot 20
June Patch Tuesday
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
Introduction of Cybersecurity with OSS at Code Europe 2024
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
Imagine a world where machines not only perform tasks but also learn, adapt, and make decisions. This is the promise of Artificial Intelligence (AI), a technology that's not just enhancing our lives but revolutionizing entire industries.
Taking AI to the Next Level in Manufacturing.pdf
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Recently uploaded (20)
Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Digital Marketing Trends in 2024 | Guide for Staying Ahead
Digital Marketing Trends in 2024 | Guide for Staying Ahead
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift.pdf
WeTestAthens: Postman's AI & Automation Techniques
WeTestAthens: Postman's AI & Automation Techniques
Introduction of Cybersecurity with OSS at Code Europe 2024
Introduction of Cybersecurity with OSS at Code Europe 2024
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Groschopp 47747 specsheet
- 1. Prepared by: Groschopp.com 02/24/14 Motor: Voltage: Speed: Gearbox: AC 3 Ph 6540 TENV 230 v 60 Hz 1460 rpm 4 Poles PS 1900 90:1 Ratio Product ID: 47747 SPECIFICATIONS Rating: Speed: Torque: Current: Output: Output: 16.2 rpm 43.9lb-in 0.19 amps 8 watts 0.0113 HP Breakdown (Cold): Speed: Torque: 10.4 rpm 122.90 lb-in Pullup (Cold): Speed: Torque: 4.6 rpm 107.24lb-in Duty Cycle: On: Off: Continuous Efficiency: Gearbox: Motor: System: 43.5 % 40.6 % 17.7 % Start/Stall Conditions: Current: Torque: 0.39 amps 110.93 lb-in Torque (lb-in) Speed RPM Efficiency 2.0 0.0 0.0 15.0 4.0 30.0 6.0 45.0 8.0 60.0 10.0 75.0 12.0 90.0 14.0 105.0 16.0 120.0 18.0 135.0 90.0 80.0 70.0 60.0 50.0 40.0 30.0 20.0 10.0 Speed, Efficiency Vs. Torque Cold Hot Notes: Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com