Ged 2266
•
0 likes•103 views
UGIGRIP is a brand of stainless steel concrete reinforcing bars produced by Ugitech SA in France. UGIGRIP bars are available in cold-worked ribbed bars from 6-25mm in diameter and hot-worked ribbed bars from 32-40mm, with tolerances of +/-100mm for hot-worked bars and +/-15% for cold-worked coils. The bars conform to European standards for geometry, mechanical properties, and chemical composition. UGIGRIP bars offer advantages for concrete structures like reduced maintenance, increased lifespan, lighter weight designs using less concrete, and higher strength allowing smaller cross-sections. The document provides recommendations for specific UGIGRIP alloy grades suitable for different
Report
Share
Report
Share
Download to read offline
Recommended
Ged 2257
Ugitech is introducing new duplex steel bars with very high yield strengths for building applications. The bars have two corrosion resistance classes, UGI 4362 and UGI 4462, with minimum yield strengths of 690 MPa and 800 MPa respectively. The bars are available in diameters from 6 to 45 mm and lengths from 500 to 6500 mm. They are suitable for applications requiring high corrosion resistance and mechanical properties such as shear pins, bolts, structural parts, and fasteners.
Ged 2336
This document summarizes Ugitech's product offerings for process industries. It describes several product lines including UGISTART bars, UGI grades, UGILEAN grades, UGISTEAD grades, UGIMA grades, UGIMA HM grades, SPRINOX grades, UGICHROM plating, UGIPLEX grades, UGIPURE grades, nickel base alloys, UGISHAPE triangles, GRADE 1 wire, and UGIWELD wire. It also discusses Ugitech's quality certification, logistic solutions, delivery time performance, and product shapes available.
Introduction
Introduction to the manufacturing technologies.
Fabrikazio teknologien sarrera.
Introducción a los procesos de fabricación.
Punzonadora Boschert para barras de cobre y dobladora cnc controlada con soft...
Punzonadora Boschert para barras de cobre y dobladora cnc controlada con soft...Grupo Idemet SA de CV
Punzonadora CNC, para barras de cobre. Solución completa para fabricar Barras de tableros de carga o distribución de energía. Es posible suministrar soluciones para Industria 4.0Sve vdi 700+800-snack-svg.gb kahveciniz katalog
Vendo yiyecek içecek otomatı G Snack Modeli otomat pazarı sitesinde kahvecilerim güvencesinde satılmaktadır.Bu ürün Alman malı olup çok sağlamdır.Bu makinelerin ön yüzünde kullanılan saçın kalınlığı hiç bir makinede bulunmamaktadır.
Kahveciniz yiyecek ve içecek otomatlarında bu makinenin artılarını siz sayın müşterilerimize sunmaktan onur duymaktadır.
Bu yiyecek otomatının kurulumu için bizi arayabilirsiniz.İzmir de bu makinelerin kurulumu ve bakımını yapmaktadır.Vending operatör kısmında kahveciniz ile birlikte partner olan kafematik birlikte çalışmaktadır.
Kullanma ve kurulum kılavuzu vendo vdı 700 ve vdı 800 modellerini kapsar.
SandenVendo snack Server VDI 700 VDI 800
www.kahveciniz.com
www.kahvecilerim.com
www.kahveciniz.com.tr
www.vendingborsasi.com
www.kafematik.com
www.bufematikvending.com
www.kahveler.com
www.kahvemakineleri.com
Punzonadora de Torreta Boschert combicut Combinación plasma y punzonado
This document discusses Boschert's Combicut plasma cutting and punching machine. The Combicut offers high productivity, quality and flexibility through its combination of plasma cutting, punching, forming and marking technologies in a single integrated machine. It provides dross-free cutting, fine tolerances and smooth cut edges using Boschert's HiFocus plasma technology. The Combicut allows complex contours to be cut quickly at high quality for both inside and outside shapes.
company profile 2014machining
This document provides contact and location information for Lairay Technology Hong Kong Co. Ltd. and its parent company ZhiNuo Precision Electric-Mechanic Technology Co. Ltd. located in Dongguan, China. It also lists major equipment including CNC lathes, machining centers, grinding machines, and a CMM used for precision machining, assembly, and quality control.
United Grinding - Walter Grinders - CNC Tool Grinder - Top Loader Automation
United Grinding - Walter Grinders - CNC Tool Grinder - Top Loader AutomationMachine Tool Systems Inc.
The document discusses an automated tool loading system called the Top Loader that can be integrated with various UNITED GRINDING machine tools. The Top Loader offers a tool capacity of up to 500 tools depending on diameter and allows for short setup times through automated teaching. It provides a space-saving and cost-effective automation solution, and a new version is now available for the HELITRONIC VISION 400 L and HELITRONIC VISION DIAMOND 400 L machine tools.Recommended
Ged 2257
Ugitech is introducing new duplex steel bars with very high yield strengths for building applications. The bars have two corrosion resistance classes, UGI 4362 and UGI 4462, with minimum yield strengths of 690 MPa and 800 MPa respectively. The bars are available in diameters from 6 to 45 mm and lengths from 500 to 6500 mm. They are suitable for applications requiring high corrosion resistance and mechanical properties such as shear pins, bolts, structural parts, and fasteners.
Ged 2336
This document summarizes Ugitech's product offerings for process industries. It describes several product lines including UGISTART bars, UGI grades, UGILEAN grades, UGISTEAD grades, UGIMA grades, UGIMA HM grades, SPRINOX grades, UGICHROM plating, UGIPLEX grades, UGIPURE grades, nickel base alloys, UGISHAPE triangles, GRADE 1 wire, and UGIWELD wire. It also discusses Ugitech's quality certification, logistic solutions, delivery time performance, and product shapes available.
Introduction
Introduction to the manufacturing technologies.
Fabrikazio teknologien sarrera.
Introducción a los procesos de fabricación.
Punzonadora Boschert para barras de cobre y dobladora cnc controlada con soft...
Punzonadora Boschert para barras de cobre y dobladora cnc controlada con soft...Grupo Idemet SA de CV
Punzonadora CNC, para barras de cobre. Solución completa para fabricar Barras de tableros de carga o distribución de energía. Es posible suministrar soluciones para Industria 4.0Sve vdi 700+800-snack-svg.gb kahveciniz katalog
Vendo yiyecek içecek otomatı G Snack Modeli otomat pazarı sitesinde kahvecilerim güvencesinde satılmaktadır.Bu ürün Alman malı olup çok sağlamdır.Bu makinelerin ön yüzünde kullanılan saçın kalınlığı hiç bir makinede bulunmamaktadır.
Kahveciniz yiyecek ve içecek otomatlarında bu makinenin artılarını siz sayın müşterilerimize sunmaktan onur duymaktadır.
Bu yiyecek otomatının kurulumu için bizi arayabilirsiniz.İzmir de bu makinelerin kurulumu ve bakımını yapmaktadır.Vending operatör kısmında kahveciniz ile birlikte partner olan kafematik birlikte çalışmaktadır.
Kullanma ve kurulum kılavuzu vendo vdı 700 ve vdı 800 modellerini kapsar.
SandenVendo snack Server VDI 700 VDI 800
www.kahveciniz.com
www.kahvecilerim.com
www.kahveciniz.com.tr
www.vendingborsasi.com
www.kafematik.com
www.bufematikvending.com
www.kahveler.com
www.kahvemakineleri.com
Punzonadora de Torreta Boschert combicut Combinación plasma y punzonado
This document discusses Boschert's Combicut plasma cutting and punching machine. The Combicut offers high productivity, quality and flexibility through its combination of plasma cutting, punching, forming and marking technologies in a single integrated machine. It provides dross-free cutting, fine tolerances and smooth cut edges using Boschert's HiFocus plasma technology. The Combicut allows complex contours to be cut quickly at high quality for both inside and outside shapes.
company profile 2014machining
This document provides contact and location information for Lairay Technology Hong Kong Co. Ltd. and its parent company ZhiNuo Precision Electric-Mechanic Technology Co. Ltd. located in Dongguan, China. It also lists major equipment including CNC lathes, machining centers, grinding machines, and a CMM used for precision machining, assembly, and quality control.
United Grinding - Walter Grinders - CNC Tool Grinder - Top Loader Automation
United Grinding - Walter Grinders - CNC Tool Grinder - Top Loader AutomationMachine Tool Systems Inc.
The document discusses an automated tool loading system called the Top Loader that can be integrated with various UNITED GRINDING machine tools. The Top Loader offers a tool capacity of up to 500 tools depending on diameter and allows for short setup times through automated teaching. It provides a space-saving and cost-effective automation solution, and a new version is now available for the HELITRONIC VISION 400 L and HELITRONIC VISION DIAMOND 400 L machine tools.Ged 2362
UGIMA® 4404HM is a new alloy developed by UGITECH that offers improved machinability over UGIMA® 4404, their existing benchmark alloy. UGIMA® 4404HM provides optimized machining performance across different operations and machines, with productivity increases of 10-20% over UGIMA® 4404 from improved chip breakability. For a sample production run of 100,000 components, the increased productivity of UGIMA® 4404HM results in a cost savings of 0.04 euros per component, or 4000 euros for the entire run.
Linear cutting processes
Linear cutting processes description.
Ebaketa prozesu linealen deskribapena.
Descripción de procesos de corte lineales.
Ged 2471
Ugitech proposes a range of stainless steel shapes for architectural applications. Their shapes offer weldability, regularity of aspect, geometric constancy, and mechanical properties. The shapes can be used for internal design, street furniture, facades, canopies, and duck-boards. Ugitech's technical team studies each inquiry to optimize projects while considering aesthetic and weight constraints. They offer various grades of stainless steel, including 1.4404 (316L), 1.4307 (304L), 1.4062, and 1.4362, with sections from 2 to 70 mm2 and surface finishes of bright degreased or annealed.
Abrasive technologies
The document discusses various abrasive technologies used for finishing surfaces, including grinding, honing, polishing, lapping, and others. It covers the principles, processes, equipment, and applications for each technology. Key abrasive processes covered include grinding (flat, cylindrical, centerless), honing, polishing, lapping, and emerging techniques like abrasive flow machining and chemical mechanical polishing. The document provides an overview of abrasive machining as an important finishing technique.
Fas scheda faster Kahveciniz katalog
Fas yiyecek içecek otomatı Modeli otomat pazarı sitesinde kahvecilerim güvencesinde satılmaktadır.Bu ürün İtalyan malı olup şık ve sağlamdır.Bu makinelerin ön yüzündeki tasarım ödül almıştır.
Kahveciniz yiyecek ve içecek otomatlarında bu makinenin artılarını siz sayın müşterilerimize sunmaktan onur duymaktadır.
Bu yiyecek otomatının kurulumu için bizi arayabilirsiniz.İzmir de bu makinelerin kurulumu ve bakımını yapmaktadır.
Vending operatör kısmında kahveciniz ile birlikte partner olan kafematik birlikte çalışmaktadır.
Kullanma ve kurulum kılavuzu fas ın modellerini kapsar.
www.kahveciniz.com
www.kahvecilerim.com
www.kahveciniz.com.tr
www.vendingborsasi.com
www.kafematik.com
www.bufematikvending.com
www.kahveler.com
www.kahvemakineleri.com
Introduction
Introduction to the manufacturing technologies.
Fabrikazio teknologien sarrera.
Introducción a los procesos de fabricación.
Linear cutting processes
Linear cutting processes description.
Ebaketa prozesu linealen deskribapena.
Descripción de procesos de corte lineales.
company profile 2014machining
Lairaytechnology HongKongCo. Ltd is a trading company registered in Hong Kong, with its mother company ZhiNuoPrecision Electric-Mechanic technology Co. located in Dongguan, China near Songshan Lake National High-Tech Zone. ZhiNuoPrecision focuses on electric-mechanical product development and CNC precision machining, using state-of-the-art equipment from Japan and Germany. Lairay provides precision machining and assembly services, and strives to build partnerships with customers to contribute to their success.
company profile 2014machining
Lairaytechnology HongKongCo. Ltd is a trading company registered in Hong Kong, with its mother company ZhiNuoPrecision Electric-Mechanic technology Co. located in Dongguan, China near Songshan Lake National High-Tech Zone. ZhiNuoPrecision focuses on electric-mechanical product development and CNC precision machining, using state-of-the-art equipment from Japan and Germany. Lairay provides precision machining and assembly services and has over 100 machines including CNC lathes, machining centers, and inspection equipment.
Smartcast
The document describes the HawkeyePedershaab Smartcast system, an automated whole-plant system for producing precast concrete base sections with customizable channel configurations and high quality. The system uses a FANUC industrial robot to mill mold cavities out of expanded polystyrene according to a user design. It also incorporates an organized production line that automatically handles filling the molds, transporting, demolding, and recycling molds. The technology was developed by Dansk Teknologisk Institut and adapted for producing manhole base sections through a collaboration with HawkeyePedershaab.
IFAE's workshop equipment
The workshop equipment at IFAE includes several computer numerical control (CNC) milling machines and lathes of various sizes for machining parts, along with other metalworking equipment such as grinding machines, electric discharge machines, welding tools, cleaning machines, measurement devices, and overhead cranes for moving heavy items. Precision is supported through tools like a FARO arm, profile projector, and profilometer.
company profile 2014machining
This document contains contact and company information for Lairaytechnology Hong Kong Co. Ltd. and its parent company ZhiNuoPrecision Electric-Mechanic technology Co. Ltd. located in Dongguan, China. It provides details on key staff contacts, addresses, websites, core competencies and an overview of major equipment including CNC machines, grinders, inspection equipment and a CMM for precision machining and assembly services.
Fiber Cable Ducting System Compare
Fiber Cable Ducting System,Cabling,Data Center, Structural Cabling, Halogen free, UL Duct, Joiner, Cross, Elbow
Abrasive technologies
Abrasive technologies description.
Teknologia urratzaileen deskribapena.
Descripción de tecnologías abrasivas.
Boschert laser de fibra en ingles. catalogo
The document summarizes the specifications of the Boschert FiberLaser cutting machine. It is available in two sizes, with working areas of either 1500x3000mm or 2000x4000mm. It can be equipped with a 1kW, 2kW, or 4kW fiber laser. The machine has a compact design that provides good accessibility for loading and unloading workpieces up to 350x1500mm/2000mm. It can efficiently cut and utilize even small remnants down to 50x300mm in size.
Ged 2492
UGIMA® 4509 is an improved machinability ferritic stainless steel containing approximately 18% chromium and stabilized with niobium and titanium. It provides significantly greater machining productivity than standard 4509, thanks to slower tool wear and better chip breakability. UGIMA® 4509 also has excellent cold working and welding properties. Testing showed it has similar corrosion resistance to standard 4509, with pitting potential and salt spray resistance performances being comparable.
Machining fundamentals
This document provides information about machining fundamentals including chip formation, cutting temperatures, cutting forces and power, and includes a glossary of related terms. It discusses different types of chip formation and factors that influence it. It also addresses how heat is distributed during cutting and explains models for calculating cutting forces, power requirements, and metal removal rates for turning, milling, and drilling operations. Key terms are defined in both English and Spanish/Basque languages in the glossary section.
CATU LV Live Working Tools
Insulated tools must meet strict standards like EN 60900 and IEC 60900, undergoing electrical testing up to 10,000 volts and mechanical tests. A variety of insulated screwdrivers, pliers, and other tools are described that are suitable for working on live low voltage cables and terminals up to 1,000 V AC and 1,500 V DC. Various tool kits and individual tools are highlighted along with their specifications.
Bosch Products @ToolsByte
The document provides specifications for several Bosch power tools including a marble cutter, rotary hammer, angle grinder, cordless screwdriver, and dust extractor. Key details listed are their power input, weight, speed, torque, battery voltage, and dimensions. Features highlighted include dustproof and waterproof housing, ergonomic design, magnetic bit holder, and integrated LED light.
B20 b30 a_b40a_e baru
The document summarizes three auto level models - B20, B30A, and B40A - made by PT Alat Ukur Indosurta. The B20 is a high-precision model for engineering with 32x magnification. The B30A is a versatile model for surveying and construction with 28x magnification. The B40A is an economical model for construction with 24x magnification. All three models have rapid automatic compensation, ultra-short 20cm minimum focus, and all-weather durability with an IPX6 rating.
Ged 2318
This document provides a summary of UGIGRIP® stainless steel concrete reinforcing bars. It discusses the general properties, including higher mechanical properties and corrosion resistance compared to conventional steel. It recommends three duplex grades - UGIGRIP® 4062, 4362, and 4462 - for their high mechanical properties and exceptional corrosion resistance. The document also discusses physical properties, corrosion resistance, geometry, and other technical specifications of the reinforcing bars.
JAREL EXPORT
This document provides information on electrical products and services from Jarel Export for hazardous areas. It describes Jarel Export's specialization in hazardous area electrical products including lighting, control systems, power distribution, motor starters, and other equipment. Technical specifications and certifications are provided for several example products like bolted sockets, cable glands, luminaires, and motors.
More Related Content
What's hot
Ged 2362
UGIMA® 4404HM is a new alloy developed by UGITECH that offers improved machinability over UGIMA® 4404, their existing benchmark alloy. UGIMA® 4404HM provides optimized machining performance across different operations and machines, with productivity increases of 10-20% over UGIMA® 4404 from improved chip breakability. For a sample production run of 100,000 components, the increased productivity of UGIMA® 4404HM results in a cost savings of 0.04 euros per component, or 4000 euros for the entire run.
Linear cutting processes
Linear cutting processes description.
Ebaketa prozesu linealen deskribapena.
Descripción de procesos de corte lineales.
Ged 2471
Ugitech proposes a range of stainless steel shapes for architectural applications. Their shapes offer weldability, regularity of aspect, geometric constancy, and mechanical properties. The shapes can be used for internal design, street furniture, facades, canopies, and duck-boards. Ugitech's technical team studies each inquiry to optimize projects while considering aesthetic and weight constraints. They offer various grades of stainless steel, including 1.4404 (316L), 1.4307 (304L), 1.4062, and 1.4362, with sections from 2 to 70 mm2 and surface finishes of bright degreased or annealed.
Abrasive technologies
The document discusses various abrasive technologies used for finishing surfaces, including grinding, honing, polishing, lapping, and others. It covers the principles, processes, equipment, and applications for each technology. Key abrasive processes covered include grinding (flat, cylindrical, centerless), honing, polishing, lapping, and emerging techniques like abrasive flow machining and chemical mechanical polishing. The document provides an overview of abrasive machining as an important finishing technique.
Fas scheda faster Kahveciniz katalog
Fas yiyecek içecek otomatı Modeli otomat pazarı sitesinde kahvecilerim güvencesinde satılmaktadır.Bu ürün İtalyan malı olup şık ve sağlamdır.Bu makinelerin ön yüzündeki tasarım ödül almıştır.
Kahveciniz yiyecek ve içecek otomatlarında bu makinenin artılarını siz sayın müşterilerimize sunmaktan onur duymaktadır.
Bu yiyecek otomatının kurulumu için bizi arayabilirsiniz.İzmir de bu makinelerin kurulumu ve bakımını yapmaktadır.
Vending operatör kısmında kahveciniz ile birlikte partner olan kafematik birlikte çalışmaktadır.
Kullanma ve kurulum kılavuzu fas ın modellerini kapsar.
www.kahveciniz.com
www.kahvecilerim.com
www.kahveciniz.com.tr
www.vendingborsasi.com
www.kafematik.com
www.bufematikvending.com
www.kahveler.com
www.kahvemakineleri.com
Introduction
Introduction to the manufacturing technologies.
Fabrikazio teknologien sarrera.
Introducción a los procesos de fabricación.
Linear cutting processes
Linear cutting processes description.
Ebaketa prozesu linealen deskribapena.
Descripción de procesos de corte lineales.
company profile 2014machining
Lairaytechnology HongKongCo. Ltd is a trading company registered in Hong Kong, with its mother company ZhiNuoPrecision Electric-Mechanic technology Co. located in Dongguan, China near Songshan Lake National High-Tech Zone. ZhiNuoPrecision focuses on electric-mechanical product development and CNC precision machining, using state-of-the-art equipment from Japan and Germany. Lairay provides precision machining and assembly services, and strives to build partnerships with customers to contribute to their success.
company profile 2014machining
Lairaytechnology HongKongCo. Ltd is a trading company registered in Hong Kong, with its mother company ZhiNuoPrecision Electric-Mechanic technology Co. located in Dongguan, China near Songshan Lake National High-Tech Zone. ZhiNuoPrecision focuses on electric-mechanical product development and CNC precision machining, using state-of-the-art equipment from Japan and Germany. Lairay provides precision machining and assembly services and has over 100 machines including CNC lathes, machining centers, and inspection equipment.
Smartcast
The document describes the HawkeyePedershaab Smartcast system, an automated whole-plant system for producing precast concrete base sections with customizable channel configurations and high quality. The system uses a FANUC industrial robot to mill mold cavities out of expanded polystyrene according to a user design. It also incorporates an organized production line that automatically handles filling the molds, transporting, demolding, and recycling molds. The technology was developed by Dansk Teknologisk Institut and adapted for producing manhole base sections through a collaboration with HawkeyePedershaab.
IFAE's workshop equipment
The workshop equipment at IFAE includes several computer numerical control (CNC) milling machines and lathes of various sizes for machining parts, along with other metalworking equipment such as grinding machines, electric discharge machines, welding tools, cleaning machines, measurement devices, and overhead cranes for moving heavy items. Precision is supported through tools like a FARO arm, profile projector, and profilometer.
company profile 2014machining
This document contains contact and company information for Lairaytechnology Hong Kong Co. Ltd. and its parent company ZhiNuoPrecision Electric-Mechanic technology Co. Ltd. located in Dongguan, China. It provides details on key staff contacts, addresses, websites, core competencies and an overview of major equipment including CNC machines, grinders, inspection equipment and a CMM for precision machining and assembly services.
Fiber Cable Ducting System Compare
Fiber Cable Ducting System,Cabling,Data Center, Structural Cabling, Halogen free, UL Duct, Joiner, Cross, Elbow
Abrasive technologies
Abrasive technologies description.
Teknologia urratzaileen deskribapena.
Descripción de tecnologías abrasivas.
Boschert laser de fibra en ingles. catalogo
The document summarizes the specifications of the Boschert FiberLaser cutting machine. It is available in two sizes, with working areas of either 1500x3000mm or 2000x4000mm. It can be equipped with a 1kW, 2kW, or 4kW fiber laser. The machine has a compact design that provides good accessibility for loading and unloading workpieces up to 350x1500mm/2000mm. It can efficiently cut and utilize even small remnants down to 50x300mm in size.
Ged 2492
UGIMA® 4509 is an improved machinability ferritic stainless steel containing approximately 18% chromium and stabilized with niobium and titanium. It provides significantly greater machining productivity than standard 4509, thanks to slower tool wear and better chip breakability. UGIMA® 4509 also has excellent cold working and welding properties. Testing showed it has similar corrosion resistance to standard 4509, with pitting potential and salt spray resistance performances being comparable.
Machining fundamentals
This document provides information about machining fundamentals including chip formation, cutting temperatures, cutting forces and power, and includes a glossary of related terms. It discusses different types of chip formation and factors that influence it. It also addresses how heat is distributed during cutting and explains models for calculating cutting forces, power requirements, and metal removal rates for turning, milling, and drilling operations. Key terms are defined in both English and Spanish/Basque languages in the glossary section.
CATU LV Live Working Tools
Insulated tools must meet strict standards like EN 60900 and IEC 60900, undergoing electrical testing up to 10,000 volts and mechanical tests. A variety of insulated screwdrivers, pliers, and other tools are described that are suitable for working on live low voltage cables and terminals up to 1,000 V AC and 1,500 V DC. Various tool kits and individual tools are highlighted along with their specifications.
Bosch Products @ToolsByte
The document provides specifications for several Bosch power tools including a marble cutter, rotary hammer, angle grinder, cordless screwdriver, and dust extractor. Key details listed are their power input, weight, speed, torque, battery voltage, and dimensions. Features highlighted include dustproof and waterproof housing, ergonomic design, magnetic bit holder, and integrated LED light.
B20 b30 a_b40a_e baru
The document summarizes three auto level models - B20, B30A, and B40A - made by PT Alat Ukur Indosurta. The B20 is a high-precision model for engineering with 32x magnification. The B30A is a versatile model for surveying and construction with 28x magnification. The B40A is an economical model for construction with 24x magnification. All three models have rapid automatic compensation, ultra-short 20cm minimum focus, and all-weather durability with an IPX6 rating.
What's hot (20)
Similar to Ged 2266
Ged 2318
This document provides a summary of UGIGRIP® stainless steel concrete reinforcing bars. It discusses the general properties, including higher mechanical properties and corrosion resistance compared to conventional steel. It recommends three duplex grades - UGIGRIP® 4062, 4362, and 4462 - for their high mechanical properties and exceptional corrosion resistance. The document also discusses physical properties, corrosion resistance, geometry, and other technical specifications of the reinforcing bars.
JAREL EXPORT
This document provides information on electrical products and services from Jarel Export for hazardous areas. It describes Jarel Export's specialization in hazardous area electrical products including lighting, control systems, power distribution, motor starters, and other equipment. Technical specifications and certifications are provided for several example products like bolted sockets, cable glands, luminaires, and motors.
Novedades 2013 accesorios cables helukabel
This document provides technical specifications for several cable gland models suitable for use in hazardous and clean room environments. It includes details on materials, dimensions, protection ratings, temperature ranges, and certifications. The cable glands described have smooth, easy to clean surfaces suitable for food, pharmaceutical and other industries with high cleanliness requirements. They provide IP68/IP69K protection and can be used in explosive atmospheres.
Drager PIR 7200 Fixed Gas Detector - Spec Sheet
The Dräger PIR 7200 is an explosion proof point infrared gas detector that uses patented 4-beam technology to continuously monitor carbon dioxide levels with drift-free and stable readings, even in harsh environments. It offers configurable response times and alarm thresholds for early detection, as well as self-diagnostic capabilities and SIL 2 certification for maximum reliability in industrial applications.
Ged 2368
This document provides information on UGIMA® 4404 HM, a stainless steel with improved machinability. Some key points:
- It has the same properties as standard grade 4404, but with exceptional machinability. Machining productivity increases of up to 40% have been achieved.
- The chemical composition and mechanical properties are provided. It is an austenitic stainless steel containing chromium, nickel, and molybdenum for corrosion resistance.
- It can be machined, forged, welded, and otherwise worked like standard stainless. Heat treatment involves solution annealing to provide the lowest strength.
- Applications include mechanical engineering, chemical plants, food/pharma equipment where machinability is important.
RGR_Presentation.pdf
This document provides information about RGR, a family-owned group of companies in Estonia that has been operating in the steel market for 30 years. It consists of RGR Metall, one of the largest steel distribution centers in Estonia, and RGR Airon, a steel service center with one of the largest CNC cutting machinery fleets in Estonia. The document outlines the facilities, staff, stock levels, sales figures, certifications, and services provided by both companies, including steel distribution, processing, cutting, welding, and fabrication.
GE LED Fundamental fixtures 2017 Sept
This document provides an overview of several LED lighting product lines, including LED HID replacement lamps, LED edgelit panels, waterproof LED integrated marine fixtures, LED diffuser downlights, LED slim downlights, and LED recessed spotlights. For each product line, it describes the product features, performance specifications, available models, applications and customer value in terms of energy savings, longevity, and cost savings over traditional lighting solutions.
Ged 2402
UGIMA® 4305 is an improved machinability austenitic stainless steel developed by Ugitech to offer very good machinability up to 500 m/min with a 25-45% increase in productivity over standard grade 4305. It has the same properties as 4305 but with significantly better machinability due to a controlled inclusion population. UGIMA® 4305 can be welded by common arc and other welding processes and offers good corrosion resistance, though not for marine environments.
Kemppi Mechanized Welding Catalogue - German Gulf Enterprises Ltd
This document provides information on the A5 MIG Rail System 2500, which is a mechanized MIG welding system. The system includes an aluminum rail, welding carriage, and remote control unit. The carriage carries the welding gun and allows for precise movement along the rail as well as weaving patterns. The system provides benefits such as increased productivity and reduced errors compared to manual welding. It can be used in various welding positions and applications.
Kraus & naimer main switches and maintenance switches kn500 gb1214
Catalog Kraus Naimer, Catalog,
Catalog Thiết Bị Điện Kraus Naimer, Catalog Thiết Bị Điện,
Catalog Biến Tần Kraus Naimer, Catalog Điện Công Nghiệp,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Kraus Naimer tại https://dienhathe.com
Xem thêm các Catalog khác của Kraus Naimer tại https://dienhathe.info
Để nhận báo giá sản phẩm Kraus Naimer vui lòng gọi: 0907.764.966
Kraus & naimer main switches and maintenance switches kn500 gb1214-dienha...
Blue Line switches are designed for electrical switchgear based on over 100 years of experience. They are protected by patents worldwide and meet international standards. Blue Line switches are known for their quality and are supported by a global sales and service network. The document provides information on main switches, maintenance switches, switch disconnectors, and technical specifications.
Lewden Electrical Palazzoli ATEX Solutions for Explosive Atmospheres - Indust...
Lewden Electrical Palazzoli ATEX Solutions for Explosive Atmospheres - Indust...Thorne & Derrick International
Lewden Electrical Industries has been supplying Electrical Equipment to Industry for over 60 years, established in 1946, Lewden Metal Products as it was then known, developed an expertise in the Metal Die-casting and Machining of products for the Electrical and Components Industry.
Palazzoli plugs, sockets and interlocked socket outlets for industrial, hazardous area (ATEX certified), marine and general low voltage power distribution, control, protection and signalling devices.
Palazzoli Industrial Overview - Industrial distribution boards, Industrial socket outlets, Industrial plugs, Industrial enclosures, Protection and signalling devices, Lighting appliances, Control devices, Protection devices, Inter-locked socket outlets, Mobile plug and socket outlets, Straight plugs.
Palazzoli ATEX Overview - ATEX plugs, ATEX inter-locked sockets, ATEX enclosures, ATEX protection and signalling devices, ATEX lighting.
Lewden Electrical - Palazzoli ATEX Solutions for Explosive Atmospheres: Industrial Plugs & Sockets, ATEX Enclosures, Cable Glands & Fittings, ATEX Control Devices, Lighting Fixtures & Signalling Devices.Ged 2328
This document provides information on UGIMA® 4435 ICH, an austenitic stainless steel alloy. It lists the chemical composition and outlines the alloy's microstructure, mechanical properties, corrosion resistance, machining characteristics, and welding and heat treatment information. The document also indicates the alloy is well-suited for applications requiring prolonged skin contact or exposure to acids due to its composition and corrosion resistance properties.
Ged 2243
UGIMA® 4542 is an improved machinability, precipitation hardened stainless steel manufactured by UGITECH. It offers significantly better machinability than grade 1.4542, with productivity increases of 20-30%. It provides excellent corrosion resistance comparable to austenitic stainless steels, and a wide range of mechanical properties depending on heat treatment, making it suitable for applications in various industries.
Ged 2410
UGIMA® 4541 is an austenitic stainless steel with the following properties:
- It contains titanium which stabilizes the microstructure and prevents intergranular corrosion.
- It has better mechanical properties and machinability than standard grade 1.4307/1.4541 stainless steel.
- It exhibits excellent oxidation and corrosion resistance up to temperatures of 850°C in oxidizing atmospheres and 750°C in oxidizing sulfur atmospheres.
- Common applications include components for turbochargers, jet and turboprop engines, and fittings/expansion joints for high-temperature process equipment.
Catalog ZCT Circutor dòng WGC
Quý khách có nhu cầu mua hàng hoặc hợp tác cùng chúng tôi xin vui lòng liên hệ theo địa chỉ :
CÔNG TY CỔ PHẦN HẠO PHƯƠNG
Trụ sở chính:
Địa chỉ: Số 88 đường Vĩnh Phú 40, Kp. Hòa Long, P. Vĩnh Phú, Thuận An, Bình Dương.
Văn phòng Hà Nội:
Địa chỉ: Số 95 TT4 – KĐT Mỹ Đình Sông Đà – Phường Mỹ Đình – Q. Nam Từ Liêm – Hà Nội
Chi nhánh Cambodia:
Địa chỉ: The Park Land SenSok, Borey Chip Mong, House Number 22, P11.Sangkat Phnom Penh Thmey, Khan San Sok, Phnom Penh.
Email: cs@haophuong.com – Website: haophuong.com
Facebook: https://www.facebook.com/haophuongcompany/
HOTLINE: 1800 6547
Guia linear igus
The document provides information on various drylin® specialist products, including telescopic rails, measuring systems, square guides, and slide disks. Telescopic rails are available in solid polymer/aluminum designs with optional locking mechanisms. Measuring systems include the WKM battery-powered system with magnetic tape and 5-digit display, and the integrated WKMEX system. The drylin® Q square guide is a new torque-resistant linear slide for compact handling of small parts. Round slide disks made of iglidur® J can move heavy loads with low friction on various surfaces.
Technor zone 2 Datasheet lighting LED G2X (3)
This document provides technical specifications for an explosion-proof LED luminaire. It describes the luminaire's housing materials, mounting possibilities, maintenance process, electrical ratings, and certifications for use in hazardous environments. The luminaire is rated IP66 for water and dust resistance and IK08 for impact resistance. It is certified for use in Zone 2 and 22 hazardous areas and has a operating temperature range of -20°C to +40°C.
07_iG Series Datasheet
The document describes a series of LED round high bay lights produced by AOK for industrial lighting applications. It provides specifications for 9 models ranging from 90W to 300W that are designed to replace common HID lighting fixtures. The lights offer high lumen output, efficacy up to 100 lumens per watt, lifespan over 50,000 hours, and optional dimming and control functions.
Craig & Derricott Switch Disconnectors Catalogue
This document provides information on switch disconnectors, fuse combination switches, and changeover switches from Craig & Derricott. It includes details on their i-switch range which combines modern styling with cost-effective design. The i-switch range includes IP41 and IP65 sealed enclosures in moulded plastic, deep drawn steel, and stainless steel. It provides electrical and mechanical specifications for isolator interiors rated from 20A to 80A.
Similar to Ged 2266 (20)
Kemppi Mechanized Welding Catalogue - German Gulf Enterprises Ltd
Kemppi Mechanized Welding Catalogue - German Gulf Enterprises Ltd
Kraus & naimer main switches and maintenance switches kn500 gb1214
Kraus & naimer main switches and maintenance switches kn500 gb1214
Kraus & naimer main switches and maintenance switches kn500 gb1214-dienha...
Kraus & naimer main switches and maintenance switches kn500 gb1214-dienha...
Lewden Electrical Palazzoli ATEX Solutions for Explosive Atmospheres - Indust...
Lewden Electrical Palazzoli ATEX Solutions for Explosive Atmospheres - Indust...
More from Emre Kalaycioglu
Xtp flyer 210x297 en_einzeln_rgb_150dpi
Sizleri yeni çelik türlerimizi keşfetmeye davet ediyoruz. Daha yüksek mukavemet, daha iyi işlenebilirlik için....
Ged 2506
UGI® 4057 AIR is a martensitic stainless steel containing 15-17% chromium and 2-3% nickel. It has good corrosion resistance and can be heat treated through austenitization between 950-1030°C followed by single or double tempering to achieve a range of mechanical properties depending on the tempering temperature. The steel has a fully martensitic microstructure after quenching and tempering and can be used in aerospace applications.
Ged 2505
UGI® 17-4PH AIR is a precipitation hardening martensitic stainless steel designed for aerospace and instrumentation with high strength and toughness. It has a martensitic microstructure and can be heat treated to different conditions with varying mechanical properties. Typical applications include parts requiring strength and corrosion resistance. The document provides detailed information on chemical composition, microstructure, heat treatments, mechanical properties, corrosion resistance, and quality control of UGI® 17-4PH AIR.
Ged 2504
UGI® 15-5PH AIR is a precipitation hardened martensitic stainless steel designed for aerospace applications. It has a chemical composition of C, Si, Mn, Ni, Cr, Cu, Mo, Nb, P, and S. The steel is produced using electro-slag remelting which results in a homogeneous microstructure of martensite and retained austenite with nanometer-scale copper precipitates. Heat treatments including solution annealing and aging are used to achieve desired mechanical properties ranging from high strength to increased toughness depending on the aging temperature. Typical properties include a tensile strength of 1000-1310 MPa, yield strength of 860-1170 MPa, and impact
Ged 2502
UGI® 4418 AIR is a low-carbon super-martensitic stainless steel designed for the aerospace market. It combines high mechanical strength with excellent resilience and corrosion resistance. The document provides detailed information on the chemical composition, microstructure, mechanical properties, corrosion resistance, heat treatment requirements, and applications of UGI® 4418 AIR stainless steel.
Ged 2494
UGIMA® 4598 is a resulphurised austenitic stainless steel developed by Ugitech to have significantly improved machinability compared to standard grade 1.4404/316L stainless steel. It contains additions of sulfur (>0.1%) and copper (1.3-1.8%) which enhance machinability during cutting operations. While it exhibits slightly reduced corrosion resistance compared to 1.4404, particularly in acidic environments, UGIMA® 4598 maintains good corrosion properties and can be used in many applications, including agricultural and food processing. It can be readily machined, formed, and welded using conventional fabrication techniques.
Ged 2486
UGIPERM® 12FM is a ferritic stainless steel developed for magnetic applications that has high permeability and low coercive field. It contains 12% chromium, silicon additions, and is re-sulphurized. After magnetic annealing, it achieves maximum relative permeability between 2000-3000 and coercive field of 95-125 A/m. UGIPERM® 12FM has similar corrosion resistance to grade 430FR/4105Si and better corrosion resistance than iron-silicon steels due to its chromium and molybdenum content. It can be easily formed at temperatures between 850-1150°C and is more ductile than austenitic stainless steels.
Ged 2479
This document provides information on UGI® 4313, a low-carbon nickel-alloyed martensitic stainless steel, including:
1. Its chemical composition and mechanical properties in different heat treated conditions.
2. How it can be machined, welded, and worked both hot and cold.
3. Its applications in areas like chemical and automotive industries due to its combination of strength, impact resistance, and corrosion properties.
Ged 2477
UGI® 4410 is a superduplex stainless steel designed for highly corrosive environments. It has very high mechanical properties and excellent corrosion resistance. The document provides details on its chemical composition, microstructure, mechanical properties, corrosion resistance, forming methods, machining, and welding characteristics. UGI® 4410 has a two-phase microstructure of ferrite and austenite and is susceptible to embrittlement if heated above 300°C due to precipitation of sigma and alpha phases. It can be formed at high temperatures between 1000-1250°C or through cold working methods.
Ged 2474
Ugitech, a French manufacturer of specialty steels, offers mass customization capabilities for its customers. It can produce steel bars between 10 to 130 mm in diameter and 500 to 6000 mm in length, within a tolerance of +/- 10 mm. Ugitech also provides finishing options like beveling the ends of bars between 30° or 45°, to a depth of up to 10 mm and within a precision tolerance of +/- 0.5 mm for the same length ranges. This direct manufacturing approach allows Ugitech to adapt its steel bar production to individual customer needs.
Ged 2473
Ugitech provides slicklines for use in the oil and gas industry. They offer a wide range of grades of stainless steel, duplex steel, and nickel alloys to suit the conditions of each oil well. The material chosen depends on factors like chloride, CO2, and H2S levels, pressure, and temperature. Ugitech can customize solutions and has full quality control from steelmaking through final processing. Their slicklines are tested to ensure safety and performance.
Ged 2424
UGICHROM® are chromium-plated stainless steel bars that combine the high efficiency of micro-fissuring chromium plating with stainless steel technology. They are recommended for hydraulic and pneumatic mechanisms due to their low friction coefficient, high resistance to wear, increased corrosion resistance from micro-fissuring chromium plating, and improved machinability. UGICHROM® bars are available in various grades that conform to European standards and offer mechanical properties suitable for hydraulic applications. They exhibit corrosion resistance through a passive oxide layer that protects and self-repairs, ensuring durability when the appropriate grade is selected for the operating environment.
Ged 2414
The document provides technical specifications for the material UGIPURE® 4441, an implantable austenitic stainless steel. It details the steel's chemical composition, microstructure, mechanical properties, corrosion resistance, machining characteristics, heat treatment requirements, and surface treatment options. UGIPURE® 4441 has excellent biocompatibility for medical implants due to its cleanliness, homogeneity, and non-magnetic properties.
Ged 2406
UGIMA® 4005 is a martensitic stainless steel containing 12-14% chromium. It has improved machinability of 15-30% compared to standard 1.4005 steel due to controlled oxide inclusions. It maintains other properties like cold working, weldability, and corrosion resistance. UGIMA® 4005 is delivered in a tempered martensitic microstructure for optimized machinability and has mechanical properties suitable for various applications requiring high machinability.
Ged 2396
UGI 4404FGX3 is a molybdenum austenitic stainless steel with less than 0.03% carbon. It has good corrosion resistance and machinability. The steel has an austenitic microstructure with 1-3% residual ferrite and can be annealed to provide the lowest mechanical properties and best corrosion resistance. It is well suited for use in industries including mechanical, chemical, and food processing.
Ged 2361
UGIMA® 4057 is a new improved machinability martensitic stainless steel developed by Ugitech. It has better machinability than grade 1.4057, allowing for productivity increases of 10-20%. UGIMA® 4057 also offers a wide range of mechanical properties depending on its metallurgical condition, along with excellent corrosion resistance suitable for various industrial applications.
Ged 2344
This document provides information on UGIMA® 4511, a niobium-stabilised ferritic stainless steel containing 16-18% chromium. It discusses the steel's chemical composition, microstructure, mechanical properties, corrosion resistance, machinability, welding characteristics, and other information. The summary highlights that UGIMA® 4511 has good corrosion resistance and machinability, with testing showing potential increases in productivity of 5-10% compared to standard grades when turning and drilling due to better chip breakability and reduced tool wear. It can also be welded using common arc welding processes due to its niobium stabilization preventing sensitization during welding.
Ged 2332
This document provides information on UGI 4435 IRH, an austenitic stainless steel composition. It lists the chemical composition and notes the steel has high molybdenum content for good corrosion resistance. It also details the steel's microstructure, mechanical properties, corrosion resistance, heat treatment options, machinability, welding characteristics, and available product forms.
Ged 2309
This document provides information about S+Bi, a steel production and processing company:
- S+Bi produces customized steel solutions along the entire value chain through integrated production, processing, distribution, and service capabilities.
- The company operates worldwide with production facilities in Europe and a global network of processing, distribution and service locations.
- S+Bi aims to be a reliable partner that can provide customized steel and solutions to meet customers' needs wherever they are located.
Ged 2306
S+Bi is an integrated steel solutions provider operating along the entire steel value chain from production to processing to distribution and services. They produce customized steel solutions tailored to customers' needs across diverse markets. S+Bi aims to be a global, reliable partner for customers by expanding its production capabilities and global presence.
More from Emre Kalaycioglu (20)
Ged 2266
- 2. Ugitech SA France Avenue Paul Girod 73403 UGINE Cedex www.ugitech.com UGIGRIP ® range Technical data Tolerances Cold ribbed Bar Ø 6 to 25 Up to 12,000 mm +100/-0 mm Coil Ø 6 to 12 1000 / 2000 kg coils +/-15 % Hot ribbed Bar Ø 32 to 40 Up to 12,000 mm +/-100 mm UGIGRIP ® dimensional range of bars and ribbed coils: Analysis conforms to NF EN 10088-3 Geometry and mechanical properties conform to NF AXP 35-014 and BS 67-44 Attainable mechanical properties Conventional yield strength of cold-ribbed products: » UGIGRIP® 4062: lnE500/lnE650 » UGIGRIP® 4362: lnE500/lnE650 » UGIGRIP® 4462: lnE500/lnE650 Advantages of UGIGRIP ® » Less maintenance and increased service life of structures. » Less concretes: lighter structures. » Reduced sections (high mech. char.), weight-saving. » Thermal conductivity at 20°C (W.m-1.K-1) = 15. Stainless steel concrete reinforcing bar Standards Exposure classes to NF EN 206-1 Ugitech recommendation doesn’t take quality (porosity and permeability) of concrete into account. Exposure class Ugitech recommendation Class XC (carbonation) XC UGIGRIP® 4062 Class XD (chlorides other than marine chlorides, including road salt) XD1 and XD2 UGIGRIP® 4062 XD3 UGIGRIP® 4362 Classes XS (marine chlorides) XS1 UGIGRIP® 4362 XS2 and XS3 UGIGRIP® 4462 Class XF (freeze/thaw with de-icing agent) XF1 and XF2 UGIGRIP® 4362 XF3 and XF4 UGIGRIP® 4462 Noncontractualdocument Villi® - www.imprimerie-villiere.com Brandlite – UGIGRIP® _EN/08-2014 D10423UK