Indian Jugaad Technology (Frugal Engineering)Javed Rizvi
Indian Jugaad Technology is drawing the attention of industrial community worldwide. It is gaining a positive reputation among researchers. If the ;
German Engineering is known for Perfection;
Russian Engineering is known for Ruggedness;
Japaneses Technology is known for Efficiency;
Indian jugaad Technology is known for its Creativity.
Frugal Innovation is about doing more with less. Entrepreneurs and innovators in emerging markets have to devise low cost strategies to either tap or circumvent institutional complexities and resource limitations to innovate, develop and deliver products and services to low income users with little purchasing power, often at mass scale and arguably in a sustainable manner. My DPhil research seeks to understand this institutionally complex, constraint-based, and low cost innovation which is designed in or for emerging market contexts.
Lucent Wastewater Solutions s about the profitable commercialization of a multi-module, highly scalable bio-reactor called a Microbial Fuel Cell used in wastewater management; it effectively reduces pollution to meet local regulation, inhibits the production of the potent green house gas Methane, produces renewable “alternative energy” in the form of electricity or hydrogen, all with no additional energy input. Compared to current technology it is 80% less in capital cost, 250% smaller in size, enables “Go Green” PR by shrinking carbon footprint, increases bottom line profits by slashing operational cost.
Solar solution Provided by Dayton Power,Dayton power is solar energy solution provider for home and enterprise.our customize product include solar water pump and solar flour mil.
Indian Jugaad Technology (Frugal Engineering)Javed Rizvi
Indian Jugaad Technology is drawing the attention of industrial community worldwide. It is gaining a positive reputation among researchers. If the ;
German Engineering is known for Perfection;
Russian Engineering is known for Ruggedness;
Japaneses Technology is known for Efficiency;
Indian jugaad Technology is known for its Creativity.
Frugal Innovation is about doing more with less. Entrepreneurs and innovators in emerging markets have to devise low cost strategies to either tap or circumvent institutional complexities and resource limitations to innovate, develop and deliver products and services to low income users with little purchasing power, often at mass scale and arguably in a sustainable manner. My DPhil research seeks to understand this institutionally complex, constraint-based, and low cost innovation which is designed in or for emerging market contexts.
Lucent Wastewater Solutions s about the profitable commercialization of a multi-module, highly scalable bio-reactor called a Microbial Fuel Cell used in wastewater management; it effectively reduces pollution to meet local regulation, inhibits the production of the potent green house gas Methane, produces renewable “alternative energy” in the form of electricity or hydrogen, all with no additional energy input. Compared to current technology it is 80% less in capital cost, 250% smaller in size, enables “Go Green” PR by shrinking carbon footprint, increases bottom line profits by slashing operational cost.
Solar solution Provided by Dayton Power,Dayton power is solar energy solution provider for home and enterprise.our customize product include solar water pump and solar flour mil.
Design engineers may work in a team along with other designers to create the drawings necessary for prototyping and production, or in the case of buildings, for construction. However, with the advent of CAD and solid modeling software, the design engineers may create the drawings themselves, or perhaps with the help of many corporate service providers.
Willbros' Talisman Safety Program was awarded the 2012 IPLOCA Chevron Health & Safety Award. This presentation explains how the program encourages safety.
Using Information Visualization to prepare for ChangeMakingHumantific
Humantific has been integrating data and information visualization into purposeful Strategic Cocreation for more than ten years. To do that we call upon and share with our clients a much broader innovation enabling toolset than is typically found in the current evolution of the data visualization community. Our "secret innovation enabling sauce" is the hybrid combination of advanced cocreation skills combined with deep visual sensemaking capacity. We share that hybrid combination with our clients and teach organizational leaders how to build SenseMaking for ChangeMaking capacity in their own organizations. Making sense of just the data part is a sub-sub-subset of what Humantific is already doing. Executing multidimensional SenseMaking in the context of ChangeMaking is the much heavier lift.
Ecoark Holdings, Inc., a technology solutions company, offers technologies to reduce waste in its clientÂ’s operations, logistics, and supply chain worldwide.
SAP PARTS™ is a rapidly growing Company in the field of Precision Products serving Heavy Engineering Industry, Construction and Agricultural OEMs, based in INDIA with a mission to produce innovative and world class Mechanical Floating Seals, today SAP Parts serves major OEM’s in India as well as throughout the GLOBE.
Design for Manufacturability Guidelines Every Designer should FollowDFMPro
Learn some important design for manufacturing guidelines for designing sheet metal parts and see how you can easily automate and configure the DFM review process in your organization so that you don’t a miss a single design guideline while designing your product. To know more visit http://dfmpro.geometricglobal.com/
Leading manufacturer designer and supplier of toric sealssapparts
Toric Seals Developed for protection of equipment in the most adverse conditions.SAP Parts seals are hard at work with OEM's all over the world. Mechanical Face Seal -Also known as Heavy Duty Seal,Face Seal,Lifetime Seal, Floating Seal,Duo Cone Seal. Specifically engineered for rotating applications.
Manufacture & Export an extensive range of dip molded products as pvc bellows, busbar shrouds, busbar end cap such as Plastic Cable Gland Hood, PVC Dip Moulding Busbar End Cap, Bus Bar End Cap, Flexible Cable Gland Hood, Plastic Insulating Handles, PVC Dip Moulded Handle Grips, PVC Busbar Insulating Shrouds, Insulating Shrouds. Our capabilities allow us in addressing the demands of power, telecom, hardware, automobile industries.
Design engineers may work in a team along with other designers to create the drawings necessary for prototyping and production, or in the case of buildings, for construction. However, with the advent of CAD and solid modeling software, the design engineers may create the drawings themselves, or perhaps with the help of many corporate service providers.
Willbros' Talisman Safety Program was awarded the 2012 IPLOCA Chevron Health & Safety Award. This presentation explains how the program encourages safety.
Using Information Visualization to prepare for ChangeMakingHumantific
Humantific has been integrating data and information visualization into purposeful Strategic Cocreation for more than ten years. To do that we call upon and share with our clients a much broader innovation enabling toolset than is typically found in the current evolution of the data visualization community. Our "secret innovation enabling sauce" is the hybrid combination of advanced cocreation skills combined with deep visual sensemaking capacity. We share that hybrid combination with our clients and teach organizational leaders how to build SenseMaking for ChangeMaking capacity in their own organizations. Making sense of just the data part is a sub-sub-subset of what Humantific is already doing. Executing multidimensional SenseMaking in the context of ChangeMaking is the much heavier lift.
Ecoark Holdings, Inc., a technology solutions company, offers technologies to reduce waste in its clientÂ’s operations, logistics, and supply chain worldwide.
SAP PARTS™ is a rapidly growing Company in the field of Precision Products serving Heavy Engineering Industry, Construction and Agricultural OEMs, based in INDIA with a mission to produce innovative and world class Mechanical Floating Seals, today SAP Parts serves major OEM’s in India as well as throughout the GLOBE.
Design for Manufacturability Guidelines Every Designer should FollowDFMPro
Learn some important design for manufacturing guidelines for designing sheet metal parts and see how you can easily automate and configure the DFM review process in your organization so that you don’t a miss a single design guideline while designing your product. To know more visit http://dfmpro.geometricglobal.com/
Leading manufacturer designer and supplier of toric sealssapparts
Toric Seals Developed for protection of equipment in the most adverse conditions.SAP Parts seals are hard at work with OEM's all over the world. Mechanical Face Seal -Also known as Heavy Duty Seal,Face Seal,Lifetime Seal, Floating Seal,Duo Cone Seal. Specifically engineered for rotating applications.
Manufacture & Export an extensive range of dip molded products as pvc bellows, busbar shrouds, busbar end cap such as Plastic Cable Gland Hood, PVC Dip Moulding Busbar End Cap, Bus Bar End Cap, Flexible Cable Gland Hood, Plastic Insulating Handles, PVC Dip Moulded Handle Grips, PVC Busbar Insulating Shrouds, Insulating Shrouds. Our capabilities allow us in addressing the demands of power, telecom, hardware, automobile industries.
Set up and commissioned in 2011, Exeed Precast is one of the largest precast production facilities in the region, covering an area of over 200,000 sq. m. located in ICAD 2 with an additional manufacturing facility, Exeed Aswar located in ICAD 1 covering and area of 21,000 sq. m.
In January 2011, Tega acquired a 100% stake in Losugen Pty Ltd.
Losugen Australia is a Perth based engineering company specialising in the design, manufacture, installation, wear monitoring and maintenance of wear liners, rubber lining, trommel screens, vibrating screens, ceramic linings and filter products for mining and materials handling industries.
As manufacturers of rubber lining brands such as Aggression, D-MAC (ceramics) and Tornado (screen and mill linings), Losugen services and exports products around the globe. It is active in mining projects and materials handling industries Australia wide as well as South East Asia and Papua New Guinea.
Losugen has a solid reputation for providing customized solutions, quality long wearing products and quick turn-around times from order through to installation.
Mechanical Face Seals Design for Differential Pressure Applicationssapparts
Application of Mechanical Face Seals is one of the most significant developments in the disc cutter. SAP Parts provides multiple version of Mechanical Face Seals for TBM cutters. Categorically SAP Seals are designed to address characteristic TBM functional specifications to a considerable extent.Visit us- https://www.sapparts.com/mechanical-face-seal.html
Hire Mechanical Face Seals for Seawater, Oil-Sand Separator & High Applicatio...sapparts
Sappart design Mechanical Face Seals are specifically engineered for rotating applications in extremely arduous environments where they withstand severe wear and prevent ingress of harsh and abrasive external media. Visit us - https://www.sapparts.com/mechanical-face-seal.html
Mechanical Face Seals are specifically engineered for rotating applications in extremely arduous environments where they withstand severe wear and prevent ingress of harsh and abrasive external media.Visit us - https://www.sapparts.com/mechanical-face-seal.html
SAP Parts manufactures two types of Metal Face Seals/ Heavy Duty Seals. Both the types consist of identical metal seal rings mounted in two separate housings face-to-face on a lapped seal face.
For more information visit - https://www.sapparts.com/mechanical-face-seal.html
Top Manufacturer and Exporter Mechanical Face Seals in Indiasapparts
SAP Parts™ Pvt. Ltd. is a leading manufacturer and exporter of Mechanical Face Seals world-wide. Established in Pune, India we have been working with major OEM's and international companies since 2009. Although providing Mechanical Face Seals is our primary business, our operations also involve several other business segments including special bushings and other engineering products.Contact us - https://www.sapparts.com/
SAP Parts Metal Face Seals are designed to offer the highest dependable leakage free Sealing performance in the tough farming environments , for the Axle & the transmission system of agriculture tractors and implements, comes with the engineered and proprietary processes, materials & elastomers.Get contact details - https://www.sapparts.com/mechanical-face-seal.html
MECHANICAL FACE SEALS ROTAVATOR BEARING HOUSINGsapparts
SAP Parts™ is been manufacturing Mechanical Face Seals for Agriculture, Construction, Mining and Industrial applications since 2009. SAP parts with its expertise has already proven their Mechanical face seals in challenging applications like rotovators, Harvesters, Tillers etc.
Get details - https://www.sapparts.com/mechanical-face-seal.html
Mechanical Face Seals for Seawater, Oil-Sand Separator & High abrasive Applic...sapparts
This new generation Metal Face Sealing product by SAP Parts™ involves highly sophisticated technology for manufacturing that involve “S-Phase” Plasma Nitriding of the surface.
https://www.sapparts.com/
For over the years SAP parts have been successfully fulfilled the need of efficient and high end
application mechanical seals to various industry segments.
Mechanical Seal Design For Differential Pressure Applicationssapparts
Mechanical Face Seal offered by SAP Parts for differential pressure applications simulate the application conditions of TBM drum cutters and cutter rollers in demanding test cycles with increased ramp and ramp down cycles on the test bench of the tensile test center and controlled by the computer system Is fully controlled by the pre-test and verification system.
Read more: http://www.sapparts.com/mechanical-face-seal.html
Floating seals are seals used for rotating bodies exposed to silt and sand. SAP Parts is one of the leading manufacturers and exporters of Duo Corn Seals, floating seals from India, Germany and USA. We have been working with major OEM and international companies since 2009.
Visit: http://www.sapparts.com/
Sap seal installation guidelines ( do type 2018)sapparts
Metal Face Seal is a special type of mechanical seal. It is also known for other specifications such as mechanical face seals, floating seals, duo con seals, toric seals, and heavy-duty seals. SAP Parts ™ Pvt. Ltd. is a leading manufacturer and exporter of mechanical face seals worldwide. Founded in Pune, India. SAP PARTS™ is a rapidly growing company in the field of Precision Products serving Heavy Engineering Industry, Construction, and Agricultural OEMs.
Mechanical Face seals are fitted in a
Groove of retaining housing, to form
the sealing at the adjoining faces.
Metal faces are precision Lapped. The
ramp angle of Seal and Housings are
slightly different and form a wedge for
the rubber ring to slide into and form a
compressed profile giving load on the
seals and making it intact.
The installation guidelines are aimed
to protect the precision lapped and
Functional metal sealing faces. The
more precautions taken, the more
Likely the seals will last in the field
Metal face seals Type -Installation Guidelinessapparts
Heavy Duty Metal Face seals are fitted
in the Flat collar of retaining housing , to
form the sealing at the adjoining faces.
Metal faces are precision Lapped. The
flat edgen of the metal Seal and Flat
Housings tend to straighten the
Trapezoidal shape of the Rubber ring to
slide into and form a compressed profile
giving load on the seals and making it intact.
Duo Cone Seals to have the grip on their journey and the work which they do. The vehicles which go in the water are even using the same seals for better advantage. SAP Parts Duo Cone Seals are accepted and used by most of the leading Construction Equipments OEM based in Europe, USA & Asia.
Mechanical Face Seals Developed for protection of equipment in the most adverse conditions.SAP Parts seals are hard at work with OEM's all over the world. Mechanical Face Seal -Also known as Heavy Duty Seal,Face Seal,Lifetime Seal, Floating Seal,Duo Cone Seal. Specifically engineered for rotating applications
Floating Seals can give the best friction, and are the best available seals in the market. They are useful in making the lower speed axle, Idler Wheels, heavy duty equipment, which are used for construction purposes. There are companies having a great deal of expertise, and they also export Duo Cone Seals.Most of the construction vehicles, having caterpillar’s articulations, make use of floating seals, which are characterised by metal friction rings.
Mechanical Face Seals Developed for protection of equipment in the most adverse conditions.SAP Parts seals are hard at work with OEM's all over the world. Mechanical Face Seal -Also known as Heavy Duty Seal,Face Seal,Lifetime Seal, Floating Seal,Duo Cone Seal. Specifically engineered for rotating applications.
Mechanical Face Seals or are specifically engineered for rotating applications in extremely arduous environments where they withstand severe wear and prevent ingress of harsh and abrasive external media.
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...Ramesh Iyer
In today's fast-changing business world, Companies that adapt and embrace new ideas often need help to keep up with the competition. However, fostering a culture of innovation takes much work. It takes vision, leadership and willingness to take risks in the right proportion. Sachin Dev Duggal, co-founder of Builder.ai, has perfected the art of this balance, creating a company culture where creativity and growth are nurtured at each stage.
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
Generating a custom Ruby SDK for your web service or Rails API using Smithyg2nightmarescribd
Have you ever wanted a Ruby client API to communicate with your web service? Smithy is a protocol-agnostic language for defining services and SDKs. Smithy Ruby is an implementation of Smithy that generates a Ruby SDK using a Smithy model. In this talk, we will explore Smithy and Smithy Ruby to learn how to generate custom feature-rich SDKs that can communicate with any web service, such as a Rails JSON API.
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
3. What Is Frugal Engineering
Frugal Engineering is the
process of reducing the
complexity and cost of a
good and its production.
4. Why Frugal Engineering
Lack of Manufacturing
Resources.
Need of the Clients with
Resource deficit.
Functional appropriateness for
the Environment.
Lack of Institutional
infrastructure for supply &
13. Where It Starts
Frugal Engineering – It all
starts at the open mind.
USE YOUR BRAIN
For the God has Gifted Unique to
Humans
1. Humor
2. Appreciation of Beauty
3. Awareness of Death
4. Understanding Time
5. Meaning of Life
6. Desire to Worship
7. Creativity
14. How to Reach Frugal
Accept that you can be
Creative.
Question Traditional
Assumptions.
Improve your Problem Solving.
Employ Creativity Techniques.
Practice Thinking in New
Ways.
Search Alternate.
19. Frugal Engineering @ SAP
PARTS
SAP Parts’ Seals are technologically developed
for protection of equipment working in the
extreme and most adverse conditions like
mud, rock-dust, sand, and water, desert
heat and sever cold. These seals provide
very effective lubricant retention and exclude
contaminates in all applications across all
types of conditions have proven a long service
life with low maintenance.
SAP Parts seal designs use elastomeric O-
Rings to provide loading for the metal
component. The design uses the contact area
between the metal sealing rings to create a
static and dynamic seal.
These Seals serves under most of the drastic
environmental and hostile service conditions
20. Frugal Engineering @ SAP
PARTS
SAP Parts’
Mechanical Duo
Cone Seals are
specially engineered
high precision
products giving
Import substitute to
Indian Construction
Equipment OEMs
21. Frugal Engineering @ SAP
PARTS
SAP Parts’ Specially
Surface Treated and
Specialty grooved
Bushings with MOS2
Coating are intended
for The high
performance in
robust conditions.
It has a wide
acceptance for its
Durability and Cost
Effectiveness.
22. Frugal Engineering @ SAP
PARTS
SAP Parts’ Seal O
Fix is an unique
Compound
developed, for Duo
Cone Seal Assembly,
which do not
contains any
Environment
Polluting chemicals.
23. Frugal Engineering @ SAP
PARTS
SAP Parts’ Test labs
are equipped with
Unique Seal leakage
life and Endurance
Testing Machines
designed by SAP
Engineering team
giving the
performance report
of all the seals
Produced, in an
efficient way
analogues to the
field working
conditions
24. SAP PARTS Manufacturer, Designer and Exporter of Specialty And Precision Parts For Construction Equipments and Off Highway
Vehicles. Address: Works@ 85,B.U.Bhandari Indl. Estate, Nagar Road, Sanaswadi, Pune – 412208 . www.sapparts.com. 02137-
THANKS
ISO 9001:2008