Frame tutorial creo_baja_sae
•Download as PPTX, PDF•
2 likes•7,990 views
This document provides instructions for modeling a frame in Creo 2.0 by: 1. Defining a coordinate system and points to lay out the frame geometry. 2. Creating straight lines between points to define the frame skeleton. 3. Assembling the part file as a framework project in a new assembly. 4. Adding pipe profiles as frame members by selecting points or planes. 5. Creating joints where members intersect by using profile cutouts.
Report
Share
Report
Share
Recommended
W-Tec 3D Hinge
SFS intec has developed the new W-Tec 3D hinge to give door manufacturers and installers an aesthetically pleasing, concealed hinge which is quick and easy to install.
Catalogue Ghế phòng chờ | Ghế băng chờ Hòa Phát
Catalogue các sản phẩm Ghế băng chờ Hòa Phát do Nội thất Hòa Phát cung cấp. Chi tiết sản phẩm tại: https://hoaphat.net/ghe-phong-cho.html
CD December 2015 - Robotic Drilling Machine presentation
Presented by George Holder (Costain) at the COMIT 2015 winter Community Day. This describes a drilling machine developed for creating bold fitting holes in the concrete linings used in the Crossrail tunnels.
Isometric projection of frustum of cone
This document provides 14 steps to draw the isometric projection of a frustum of a cone with given dimensions. Key steps include:
1) Drawing the top and front views of the solid with true dimensions and marking the dimensions.
2) Using a conversion factor of 0.816 to plot points and lines onto the isometric axes from the top and front views.
3) Drawing the base and top circles as ellipses within boxes representing their true circular shapes.
4) Joining the top and bottom ellipses tangentially to complete the isometric projection of the frustum of a cone.
Drawing An Ionic Volute
Drawing an Ionic Volute - a decorative element typical of Classic architecture.
The Ionic volute is representative of a spiral with three turns, restrained within a 7:6 rectangle. It is formed by drawing a series of quarter-circles (quadrants) which run neatly one into the other, ending in a full circle termed the Cathetus (eye) of the volute. This method is transferable to practically any size of full-scale building unit.
Pro E Training Institutes in Hyderabad
Ikya Global offers the Best Pro E Training in Hyderabad and it also provides training with 100% job assistance. Bright future in solid Modeling, Drafting, rendering, Tolerance Analysis. This software is used in healthcare sectors, mechanical manufacturing sectors and Electrical fields.
Program Coverage:
• 2D Modeling – Drawing & Detailing
• 3D Modeling
• Power engine generator t for EEE students
• Datum planes
• Part manipulation
• Layers, sweeps & Blends Patterns
• Assembly creations
• Drafting
• Promold
• Animation
Certification:
• Certificate from national accredited organization AIITA (All India Information Technology Association) (or)
• Certificate from internationally accredited organization IIML (International Informatics Mauritius Ltd)
CAD Portfolio - Karan Shah
A portfolio demonstration of the product design and CAD work that I have completed throughout my course of
educational and professional career.
Recommended
W-Tec 3D Hinge
SFS intec has developed the new W-Tec 3D hinge to give door manufacturers and installers an aesthetically pleasing, concealed hinge which is quick and easy to install.
Catalogue Ghế phòng chờ | Ghế băng chờ Hòa Phát
Catalogue các sản phẩm Ghế băng chờ Hòa Phát do Nội thất Hòa Phát cung cấp. Chi tiết sản phẩm tại: https://hoaphat.net/ghe-phong-cho.html
CD December 2015 - Robotic Drilling Machine presentation
Presented by George Holder (Costain) at the COMIT 2015 winter Community Day. This describes a drilling machine developed for creating bold fitting holes in the concrete linings used in the Crossrail tunnels.
Isometric projection of frustum of cone
This document provides 14 steps to draw the isometric projection of a frustum of a cone with given dimensions. Key steps include:
1) Drawing the top and front views of the solid with true dimensions and marking the dimensions.
2) Using a conversion factor of 0.816 to plot points and lines onto the isometric axes from the top and front views.
3) Drawing the base and top circles as ellipses within boxes representing their true circular shapes.
4) Joining the top and bottom ellipses tangentially to complete the isometric projection of the frustum of a cone.
Drawing An Ionic Volute
Drawing an Ionic Volute - a decorative element typical of Classic architecture.
The Ionic volute is representative of a spiral with three turns, restrained within a 7:6 rectangle. It is formed by drawing a series of quarter-circles (quadrants) which run neatly one into the other, ending in a full circle termed the Cathetus (eye) of the volute. This method is transferable to practically any size of full-scale building unit.
Pro E Training Institutes in Hyderabad
Ikya Global offers the Best Pro E Training in Hyderabad and it also provides training with 100% job assistance. Bright future in solid Modeling, Drafting, rendering, Tolerance Analysis. This software is used in healthcare sectors, mechanical manufacturing sectors and Electrical fields.
Program Coverage:
• 2D Modeling – Drawing & Detailing
• 3D Modeling
• Power engine generator t for EEE students
• Datum planes
• Part manipulation
• Layers, sweeps & Blends Patterns
• Assembly creations
• Drafting
• Promold
• Animation
Certification:
• Certificate from national accredited organization AIITA (All India Information Technology Association) (or)
• Certificate from internationally accredited organization IIML (International Informatics Mauritius Ltd)
CAD Portfolio - Karan Shah
A portfolio demonstration of the product design and CAD work that I have completed throughout my course of
educational and professional career.
Chassis design for baja sae
CADmantra Technologies Pvt. Ltd. is one of the best Cad training company in northern zone in India . which are provided many types of courses in cad field i.e AUTOCAD,SOLIDWORK,CATIA,CRE-O,Uniraphics-NX, CNC, REVIT, STAAD.Pro. And many courses
Contact: www.cadmantra.com
www.cadmantra.blogspot.com
www.cadmantra.wix.com
Creo ?Pro E 5.0
The document introduces Creo Elements/ProE, a 3D CAD software developed by PTC. It discusses the history and versions of ProE, from its launch in 1988 up to the current Creo Elements/ProE 5.0. The key benefits of Creo Elements are listed as fast/accurate design, powerful tools, ease of use, simulation, and analysis capabilities. Modeling techniques covered include sketching, part design, assembly, surface modeling, sheet metal, and drafting.
Creo essentials ptc solutions success slide
Charm Engineering adopted PTC Windchill PDMLink and upgraded from Pro/ENGINEER to PTC Creo to manage product data and enable concurrent engineering. This helped Charm Engineering implement a single CAD data management platform as their engineering department expanded. Using the new PTC solutions reduced Charm Engineering's time to market and improved product development efficiency.
Using pro weld in creo 2.0
This document provides information on using Pro/Weld in Creo 2.0 to model welds in assemblies. It describes how to create welding rods and processes, set welding preferences, use weld features to apply welds, and measure weld properties. Tips are provided on using the weld wizard, setting default parameters, and troubleshooting notch features.
CADD Modelling of Bench Vise using Creo Parametric 2.0
The document is a project report on modeling a bench vise using CREO Parametric 2.0 software. It was submitted by Kashish Verma, Khusro Kamaluddin, Kush Malhotra, and Lalit Kumar. The report describes the types of vises, parts of a vise, and the modeling and assembly of the 10 parts of the bench vise model in CREO.
2011 tortosa g. manual práctico de quimiometría
Este documento presenta un manual práctico de quimiometría en español. El manual introduce conceptos básicos de probabilidad y estadística descriptiva e inferencial, con énfasis en su aplicación al análisis químico. Incluye ejemplos y recursos en línea para facilitar el aprendizaje de estas herramientas estadísticas fundamentales en química analítica.
Dalhousie FSAE 2013 frame presentation
The document summarizes the design process for the 2013 frame of Dalhousie Formula SAE. The 2012 frame had issues with weight, visibility, and compliance with new regulations. The goals for the 2013 frame were to reduce weight by 5%, improve visibility, and complete construction in the fall semester. Through targeting the heaviest tubing for reduction and lowering and extending certain areas of the frame, the 2013 frame achieved a 7% weight reduction to 26kg while improving visibility and complying with new rules through adjustments to its dimensions.
MECH CREO
Creo is a 3D CAD software used for engineering design. It allows users to create 3D models using parametric and feature-based modeling. Creo includes modules for sketching, part modeling, assembly, sheet metal design, surfacing, and detailing. Key features include extrude, revolve, holes, patterns, sweeps, blends, and advanced modeling tools. Creo can generate 2D drawings, bills of materials, and annotations from 3D models to documentation designs.
Manual práctico de quimiometría 2013
Este documento presenta un manual práctico de quimiometría. Define la quimiometría como la aplicación de la estadística a problemas químicos y analíticos. Explica conceptos básicos como probabilidad, distribuciones de probabilidad, muestras representativas, errores y precisión de mediciones. También cubre técnicas estadísticas como límites de confianza, inferencia estadística y pruebas de hipótesis usando estadísticos de contraste y valores p.
Flamenco
El flamenco es un género musical y de danza originado en el siglo XVIII en Andalucía, España. Se basa en la música y danza andaluzas y fue desarrollado en gran parte por la etnia gitana de Andalucía. El flamenco incluye el cante (canto), el toque (música) y el baile como sus principales elementos, y los palos flamencos expresan la realidad humana a través de la música.
BAJA SAE Brazil Structural Report
The Bajara Team simulated their off-road vehicle's roll cage structure using Ansys software prior to construction to prepare for a competition. Modal analyses found vibrational frequencies that could fatigue welding points. Collision and rollover simulations showed the roll cage would protect the pilot despite possible damage. Next steps are to modify the design to dampen vibrations and transform the vehicle into an agricultural machine suitable for small farms.
Technical Instructions (FSAE)
This document provides instructions for assembling a Formula SAE race car frame. It begins with an overview of required skills, safety warnings, and tools. Sections then guide the reader through frame preparation, assembly, and finishing steps. Key steps include using jigs and risers to accurately weld frame members into front, rear, and bottom sections. Upon completion, the frame is heat treated and cleaned before final assembly.
How To Build A Baja Atv
The method described in this presentation is just one way of pulling the build off, mostly based on what my team did. There is no doubt that there might be better ways. The purpose of this presentation was for the newbies to see how the various mechnicals come together, their relative proportions, sizes, positions, layouts, etc.
Also, I shall carry out corrections and revisions from time to time, so that more information can be passed on effectively to successive BAJA aspirants.
BAJA 2014 presentation
The document provides technical details of a BAJA SAE vehicle designed by Team Piranha Racing from Maharashtra Institute of Technology, Pune. It includes dimensions, materials, and analysis results for components like the roll cage, suspension, transmission, brakes, and steering. Graphs show performance parameters like acceleration, traction forces, and steering characteristics. The document also outlines the project plan, workshop facilities, cost breakdown, and validation methods like a half-car model analysis of camber and roll center heights.
Team Kashpiers "Baja 2013"
•SAE Baja is an Inter-colligate off road racing competition where the top engineering colleges in India successfully fabricate and race there all-terrain vehicles.
•The competition has various automotive giants like Mahindra, General motors etc. powering the event.
•The contest challenges each team to function as a firm whose objective is to design, fabricate, market and race off their vehicles that would be evaluated on a variety of manufacturing angles by various professionals from the sponsoring automotive companies.
Creo parametric tips and tricks
This document provides tips and tricks for using Creo Parametric. It discusses how to set background colors, create mapkeys, manage large assemblies, use mechanism connections, and improve dimensioning in drawings. Specific tips include using advanced selection methods, assigning mass to assembly components, leveraging intent references, and various configuration options to control system behavior. The document aims to increase efficiency and robustness when working in Creo.
Auto quiz mains
The Quiz Presentation for the final round of Auto Quiz event held at Lourdes Matha College of Science and Technology as a part of our Mechanical fest- TRACTION 2k17(EQUINOX 17')
PRO ENGINEER BASIC
Pro/ENGINEER is feature-based, associative solid modeling software that runs on the Microsoft Windows platform. It provides capabilities for solid modeling, assembly modeling, drafting, finite element analysis, and NC and tooling functions for mechanical engineers. Creo Elements/Pro is the updated name for Pro/ENGINEER. The document then provides brief descriptions of computer-aided design (CAD) and computer-aided manufacturing (CAM). CAD is used by engineers to create 2D and 3D drawings, while CAM uses computer control for manufacturing objects from those drawings.
Concrete bent with_nonprismatic_cap_beam
This SAP2000 tutorial provides an overview of how to model a basic concrete bent structure. It demonstrates how to define materials, sections, grids, supports, loads, and perform analysis and design. Key steps include defining a 5000 psi concrete material, rectangular and circular concrete sections, equally spaced grids, fixed supports, point loads on the cap beam, and running analysis to show bending moment results. The tutorial also shows how to model a nonprismatic cap beam and rotate local axes.
Two dimensional truss
This document provides instructions for using ANSYS to analyze a 2D truss system. It describes the steps to define the geometry by specifying keypoints and connecting lines, define the element type and material properties, apply boundary conditions by constraining the displacement of specific keypoints, apply nodal loads, and solve the model to determine deflections, reaction forces and stresses. The modeling is done in the ANSYS preprocessor by meshing spar elements, then loads and constraints are applied before solving the linear static analysis in the solution phase.
SAP2000 Cold-formed steel truss.pdf
This document provides instructions for modeling a cold-formed steel truss in SAP2000. It describes how to create the gridlines, define section properties for C-shaped and hat-shaped cold-formed sections, draw the truss members between joints, assign sections and moment releases, add supports and loads, and display the model in 3D. The steps include creating the grid, adding joints offset from the grid, replicating joints to form chords, defining new section properties, drawing members between joints while controlling slope and orientation, assigning sections and moment releases, adding fixed and roller supports, and applying distributed live and dead loads.
Umc90 lab2 il2222
This document provides instructions for laying out and verifying a digital CMOS inverter circuit using Cadence Virtuoso. It explains how to generate the layout from the schematic, create interconnects between layers using wires and vias, add labels to identify ports, and check the design using Design Rule Checking (DRC) and Layout vs Schematic (LVS) to verify there are no errors or mismatches. The goals are to practice layout techniques, learn how to use the layout editor tools, and ensure the physical design matches the schematic before tapeout.
More Related Content
Viewers also liked
Chassis design for baja sae
CADmantra Technologies Pvt. Ltd. is one of the best Cad training company in northern zone in India . which are provided many types of courses in cad field i.e AUTOCAD,SOLIDWORK,CATIA,CRE-O,Uniraphics-NX, CNC, REVIT, STAAD.Pro. And many courses
Contact: www.cadmantra.com
www.cadmantra.blogspot.com
www.cadmantra.wix.com
Creo ?Pro E 5.0
The document introduces Creo Elements/ProE, a 3D CAD software developed by PTC. It discusses the history and versions of ProE, from its launch in 1988 up to the current Creo Elements/ProE 5.0. The key benefits of Creo Elements are listed as fast/accurate design, powerful tools, ease of use, simulation, and analysis capabilities. Modeling techniques covered include sketching, part design, assembly, surface modeling, sheet metal, and drafting.
Creo essentials ptc solutions success slide
Charm Engineering adopted PTC Windchill PDMLink and upgraded from Pro/ENGINEER to PTC Creo to manage product data and enable concurrent engineering. This helped Charm Engineering implement a single CAD data management platform as their engineering department expanded. Using the new PTC solutions reduced Charm Engineering's time to market and improved product development efficiency.
Using pro weld in creo 2.0
This document provides information on using Pro/Weld in Creo 2.0 to model welds in assemblies. It describes how to create welding rods and processes, set welding preferences, use weld features to apply welds, and measure weld properties. Tips are provided on using the weld wizard, setting default parameters, and troubleshooting notch features.
CADD Modelling of Bench Vise using Creo Parametric 2.0
The document is a project report on modeling a bench vise using CREO Parametric 2.0 software. It was submitted by Kashish Verma, Khusro Kamaluddin, Kush Malhotra, and Lalit Kumar. The report describes the types of vises, parts of a vise, and the modeling and assembly of the 10 parts of the bench vise model in CREO.
2011 tortosa g. manual práctico de quimiometría
Este documento presenta un manual práctico de quimiometría en español. El manual introduce conceptos básicos de probabilidad y estadística descriptiva e inferencial, con énfasis en su aplicación al análisis químico. Incluye ejemplos y recursos en línea para facilitar el aprendizaje de estas herramientas estadísticas fundamentales en química analítica.
Dalhousie FSAE 2013 frame presentation
The document summarizes the design process for the 2013 frame of Dalhousie Formula SAE. The 2012 frame had issues with weight, visibility, and compliance with new regulations. The goals for the 2013 frame were to reduce weight by 5%, improve visibility, and complete construction in the fall semester. Through targeting the heaviest tubing for reduction and lowering and extending certain areas of the frame, the 2013 frame achieved a 7% weight reduction to 26kg while improving visibility and complying with new rules through adjustments to its dimensions.
MECH CREO
Creo is a 3D CAD software used for engineering design. It allows users to create 3D models using parametric and feature-based modeling. Creo includes modules for sketching, part modeling, assembly, sheet metal design, surfacing, and detailing. Key features include extrude, revolve, holes, patterns, sweeps, blends, and advanced modeling tools. Creo can generate 2D drawings, bills of materials, and annotations from 3D models to documentation designs.
Manual práctico de quimiometría 2013
Este documento presenta un manual práctico de quimiometría. Define la quimiometría como la aplicación de la estadística a problemas químicos y analíticos. Explica conceptos básicos como probabilidad, distribuciones de probabilidad, muestras representativas, errores y precisión de mediciones. También cubre técnicas estadísticas como límites de confianza, inferencia estadística y pruebas de hipótesis usando estadísticos de contraste y valores p.
Flamenco
El flamenco es un género musical y de danza originado en el siglo XVIII en Andalucía, España. Se basa en la música y danza andaluzas y fue desarrollado en gran parte por la etnia gitana de Andalucía. El flamenco incluye el cante (canto), el toque (música) y el baile como sus principales elementos, y los palos flamencos expresan la realidad humana a través de la música.
BAJA SAE Brazil Structural Report
The Bajara Team simulated their off-road vehicle's roll cage structure using Ansys software prior to construction to prepare for a competition. Modal analyses found vibrational frequencies that could fatigue welding points. Collision and rollover simulations showed the roll cage would protect the pilot despite possible damage. Next steps are to modify the design to dampen vibrations and transform the vehicle into an agricultural machine suitable for small farms.
Technical Instructions (FSAE)
This document provides instructions for assembling a Formula SAE race car frame. It begins with an overview of required skills, safety warnings, and tools. Sections then guide the reader through frame preparation, assembly, and finishing steps. Key steps include using jigs and risers to accurately weld frame members into front, rear, and bottom sections. Upon completion, the frame is heat treated and cleaned before final assembly.
How To Build A Baja Atv
The method described in this presentation is just one way of pulling the build off, mostly based on what my team did. There is no doubt that there might be better ways. The purpose of this presentation was for the newbies to see how the various mechnicals come together, their relative proportions, sizes, positions, layouts, etc.
Also, I shall carry out corrections and revisions from time to time, so that more information can be passed on effectively to successive BAJA aspirants.
BAJA 2014 presentation
The document provides technical details of a BAJA SAE vehicle designed by Team Piranha Racing from Maharashtra Institute of Technology, Pune. It includes dimensions, materials, and analysis results for components like the roll cage, suspension, transmission, brakes, and steering. Graphs show performance parameters like acceleration, traction forces, and steering characteristics. The document also outlines the project plan, workshop facilities, cost breakdown, and validation methods like a half-car model analysis of camber and roll center heights.
Team Kashpiers "Baja 2013"
•SAE Baja is an Inter-colligate off road racing competition where the top engineering colleges in India successfully fabricate and race there all-terrain vehicles.
•The competition has various automotive giants like Mahindra, General motors etc. powering the event.
•The contest challenges each team to function as a firm whose objective is to design, fabricate, market and race off their vehicles that would be evaluated on a variety of manufacturing angles by various professionals from the sponsoring automotive companies.
Creo parametric tips and tricks
This document provides tips and tricks for using Creo Parametric. It discusses how to set background colors, create mapkeys, manage large assemblies, use mechanism connections, and improve dimensioning in drawings. Specific tips include using advanced selection methods, assigning mass to assembly components, leveraging intent references, and various configuration options to control system behavior. The document aims to increase efficiency and robustness when working in Creo.
Auto quiz mains
The Quiz Presentation for the final round of Auto Quiz event held at Lourdes Matha College of Science and Technology as a part of our Mechanical fest- TRACTION 2k17(EQUINOX 17')
PRO ENGINEER BASIC
Pro/ENGINEER is feature-based, associative solid modeling software that runs on the Microsoft Windows platform. It provides capabilities for solid modeling, assembly modeling, drafting, finite element analysis, and NC and tooling functions for mechanical engineers. Creo Elements/Pro is the updated name for Pro/ENGINEER. The document then provides brief descriptions of computer-aided design (CAD) and computer-aided manufacturing (CAM). CAD is used by engineers to create 2D and 3D drawings, while CAM uses computer control for manufacturing objects from those drawings.
Viewers also liked (18)
CADD Modelling of Bench Vise using Creo Parametric 2.0
CADD Modelling of Bench Vise using Creo Parametric 2.0
Similar to Frame tutorial creo_baja_sae
Concrete bent with_nonprismatic_cap_beam
This SAP2000 tutorial provides an overview of how to model a basic concrete bent structure. It demonstrates how to define materials, sections, grids, supports, loads, and perform analysis and design. Key steps include defining a 5000 psi concrete material, rectangular and circular concrete sections, equally spaced grids, fixed supports, point loads on the cap beam, and running analysis to show bending moment results. The tutorial also shows how to model a nonprismatic cap beam and rotate local axes.
Two dimensional truss
This document provides instructions for using ANSYS to analyze a 2D truss system. It describes the steps to define the geometry by specifying keypoints and connecting lines, define the element type and material properties, apply boundary conditions by constraining the displacement of specific keypoints, apply nodal loads, and solve the model to determine deflections, reaction forces and stresses. The modeling is done in the ANSYS preprocessor by meshing spar elements, then loads and constraints are applied before solving the linear static analysis in the solution phase.
SAP2000 Cold-formed steel truss.pdf
This document provides instructions for modeling a cold-formed steel truss in SAP2000. It describes how to create the gridlines, define section properties for C-shaped and hat-shaped cold-formed sections, draw the truss members between joints, assign sections and moment releases, add supports and loads, and display the model in 3D. The steps include creating the grid, adding joints offset from the grid, replicating joints to form chords, defining new section properties, drawing members between joints while controlling slope and orientation, assigning sections and moment releases, adding fixed and roller supports, and applying distributed live and dead loads.
Umc90 lab2 il2222
This document provides instructions for laying out and verifying a digital CMOS inverter circuit using Cadence Virtuoso. It explains how to generate the layout from the schematic, create interconnects between layers using wires and vias, add labels to identify ports, and check the design using Design Rule Checking (DRC) and Layout vs Schematic (LVS) to verify there are no errors or mismatches. The goals are to practice layout techniques, learn how to use the layout editor tools, and ensure the physical design matches the schematic before tapeout.
Practical work 2
This document provides instructions for a practical evaluation in a computer aided design course. Students will be evaluated on their ability to create drawings in AutoCAD using different coordinate input methods, including absolute, relative, and polar coordinates. They are asked to redraw a sample diagram using each method and record their coordinate inputs in a table. The document provides background on coordinate systems and step-by-step instructions for completing the assignment.
150 Basic Business Diagrams for business presentation
150 Basic Business models and diagrams for your powerful business presentations.
Content:
Powerpoint, presentations, business, slides, diagrams, charts, Flow, Organization, Planning, Matrix, Positioning, Map, Composition, Distribution, Time Series, Ranking, Correlation, Pie, Segmented Colums, Sequential Composition, Histogram, Histograph, Pyramid of Ages, Cumulative Frequency, Multiple Lines, Bars, Segmented Bars, Multiple profiles, Barometer, Devision, Dots, Curve, Multiple Curves, Bubble Charts, Waterfalls
Download these diagrams on
http://www.drawpack.com
(try our free membership offer)
Modeling seismic analysis_and_design_of_rc_building_10_story
This document provides step-by-step instructions for modeling, analyzing, and designing a 10-story reinforced concrete building using ETABS. It includes steps to start a new model, define material properties, member sections, loads, mass sources, design codes, meshing, load combinations, analysis options, running analysis and design, and viewing results. The objective is to demonstrate the analysis and design of the building using the UBC-97 code for static lateral forces.
Stepping into AutoCAD, Starting AutoCAD.
Hope this will help to those who want to learn basic autocad
Autocad electrical
Computer Aided Drawing (CAD) involves preparing drawings on a computer screen. AutoCAD is a commonly used CAD software that allows designers and engineers to create 2D drawings and 3D models. It contains various commands to draw basic shapes and entities like lines, circles, rectangles, and more advanced tools for editing, layering, dimensions, and hatching. Some key commands include LINE, CIRCLE, RECTANGLE, ARRAY, COPY, and HATCH. AutoCAD also allows organizing drawings using layers, text, and dimensions to fully detail engineering designs.
Missing Parts I don’t think you understood the assignment.docx
Missing Parts:
I don’t think you understood the assignment. I am looking at it, all I see is where you entered
SAS codes and then that’s it. These SAS codes you inputted, I’d like to see some results, such as
these things I am about to mention:
Part I)
1. (2 pts.) Import the data into your software. Be sure to check that your data looks
exactly like the original data before proceeding! 2. (2 pts.) For BOTH of your
original quantitative variables, create TWO categorized versions based upon cutoffs
of your choice. One binary version and one multi-level version with 3-5 groups. Use
numbers for the new variables to represent the groups. No group should have less
than 10% of the overall sample. Be sure you define your groups so that they do not
overlap and you do not miss any observations. • In SPSS this can be done using
TRANSFORM and RECODE INTO DIFFERENT VARIABLE. • In SAS you need
to use a DATA step with IF-THEN statements to create the new variables. 3. (2 pts.)
Create translations which provide the range of values for the variables created in
Question 3. • In SPSS this is done in the variable view using the “Values” column. •
In SAS you need to create the formats using PROC FORMAT and then assign those
formats to the appropriate variables using a DATA step. 4. (3 pts.) Label all
variables with descriptive titles. • In SPSS this is done in the variable view using the
“Label” column. • In SAS you need to use a DATA step which includes a LABEL
statement.
All the codes I’m looking at, I didn’t need to see them, I expect to see them in a table. I’ve
similar exercises, and that’s not how they look.
PART II)
Part 2: Descriptive Summary of Each Variable 5. (6 pts.) Calculate the sample size, sample
mean, sample median, sample standard deviation, min, max, Q1, Q3, and 95% confidence
interval for the population mean for your two quantitative variables. Provide the software
output containing these results in your solution. 6. (6 pts.) Construct a histogram, boxplot,
and QQ-plot for your two quantitative variables. Provide only the graphs in your solution.
7. (8 pts.) Construct a frequency table for each of the four variables created in Question 3.
8. (6 pts.) Provide a brief discussion of the distribution of your two main variables using as
much of the information in Questions 5-7 as possible (and yet remain as concise as
possible).
Where did you do all these calculations; I didn’t see anything. I did see a histogram, that’s all I
saw. Where’s the box plot, QQ plot, there was no graph. Also, you didn’t provide any discussion.
PART III)
Part 3: Case QQ - Using the two quantitative variables 9. (2 pts.) Construct a scatterplot.
Provide only this plot in your solution. 10. (2 pts.) Regardless of whether it is appropriate,
calculate Pearson’s correlation coefficient. Provide the output containing the estimate and
the p-value. 11. (3 pts.) Regardless of whether it is a ...
Rigid-jointed_frame_analysis_1458662758
This document describes a finite element analysis of a rigid jointed frame structure. It provides the geometry, material properties, boundary conditions and loading of the frame. It then outlines the steps to model the frame in finite element software, apply the loading, perform the analysis, and view the results for support reactions, axial forces, shear forces, and bending moments. Hand calculations are also shown to verify the analysis results.
Xmastcamcribboard
This tutorial teaches how to create a Cribbage board part file and generate toolpaths to machine it on a CNC mill. The steps include: (1) Drawing the board geometry using lines, arcs, and text; (2) Setting up stock material and tooling in Mastercam; (3) Creating drilling, pocketing, contouring, and engraving toolpaths using the appropriate tools and speeds; and (4) Using backplot and verification to check that the toolpaths will correctly machine the part as designed.
Ansys iges tutorial
This document provides instructions for using ANSYS to analyze a plate structure with pinned connections. It describes 20 steps to: 1) import the CAD model, define materials and mesh the midplane surfaces; 2) apply multi-point constraints (MPCs) at pinned connections and a beam element between plates; 3) apply boundary conditions and a pressure load; and 4) solve and inspect results including stresses and reactions at supports. The goal is to demonstrate using MPCs to model pinned joints in a finite element analysis.
Workshop10 creep-jop
This document describes how to create, run, and monitor a creep analysis job in ABAQUS to model the creep of a pipe intersection over 50 years. It discusses defining and submitting the job, visualizing and plotting the deformed shape and results, including displacement and stress/strain histories at the intersection point over time.
SAP2000 Piperack Tutorial 2010.pdf
SAP2000 Piperack Tutorial fo structural calculation
sdlklsdjklsdsdjkljklsdjsdjsdjsdjsdjsdjsd
dssdksdksdksdksdkskasdksdksdksdksdk
ksdkasdkasdkpdsksdksdksdksd
ksdkasdksdksdksdksdksdks
presentationprintTemp.ppt auto cad presentation
This document provides an outline for a lesson on AutoCAD. It begins with an introduction to AutoCAD as 2D and 3D CAD software available since 1982. Next, it discusses AutoCAD's history and development. The outline then covers various AutoCAD commands and functions for drawing 2D and 3D shapes, editing objects, changing the user coordinate system, and assigning homework. It concludes by listing some advantages of AutoCAD like industry standard compatibility but also disadvantages like limited file formats.
Solid works tutorial08_bearingpuller_english_08_lr
1. The document is a tutorial for creating a bearing puller in SolidWorks that consists of three parts.
2. The first part created is the main bridge using features like revolved boss, cut extrusions, and circular patterns.
3. Holes are added to the bridge part using a hole wizard to add metric threads.
Visi progress
The document describes new unfolding and strip design routines in VISI-Progress. It provides details on the part analysis, unfolding, and step-by-step unfolding interfaces. Key steps include performing part analysis, unfolding using different methods, generating solid models from bend stages, and defining strips using the strip manager interface. The interfaces allow analyzing parts, unfolding them, generating bend stages, and designing strips to hold the formed parts.
Auto cad workbook2d hartnell college engineering technology
This document provides instructions for using AutoCAD's polyline, multiline, and spline commands to create geometric shapes and architectural drawings. The polyline command is used to create shapes with variable widths. The multiline command is used to draw shapes with offset lines, and different justifications. The spline command draws curved shapes, and the splinedit command edits the control points and tangents of splines. Exercises demonstrate using these commands to design geometric objects, electrical circuits, building walls and openings, and decorative door knockers.
Solid modeling
The document provides instructions for creating a finite element analysis model of a tension fitting in MSC Patran. The steps include:
1. Creating the parasolid solid model of the tension fitting using boolean operations and other parasolid tools.
2. Generating a tetrahedral mesh and assigning material properties and loads representing tension.
3. Running the finite element analysis in MSC Nastran and post-processing the results in Patran to view stress and deformation.
The document outlines 17 detailed steps to guide the user through the entire modeling and analysis process in Patran and Nastran.
Similar to Frame tutorial creo_baja_sae (20)
150 Basic Business Diagrams for business presentation
150 Basic Business Diagrams for business presentation
Modeling seismic analysis_and_design_of_rc_building_10_story
Modeling seismic analysis_and_design_of_rc_building_10_story
Missing Parts I don’t think you understood the assignment.docx
Missing Parts I don’t think you understood the assignment.docx
Solid works tutorial08_bearingpuller_english_08_lr
Solid works tutorial08_bearingpuller_english_08_lr
Auto cad workbook2d hartnell college engineering technology
Auto cad workbook2d hartnell college engineering technology
Recently uploaded
一比一原版(UST毕业证)圣托马斯大学毕业证如何办理
UST毕业证offer【微信95270640】☀《圣托马斯大学毕业证购买》GoogleQ微信95270640《UST毕业证模板办理》加拿大文凭、本科、硕士、研究生学历都可以做,二、业务范围：
★、全套服务：毕业证、成绩单、化学专业毕业证书伪造《圣托马斯大学大学毕业证》Q微信95270640《UST学位证书购买》
文凭办理流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：微信95270640我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）。
7完成交易删除客户资料
高精端提供以下服务：
一：圣托马斯大学圣托马斯大学硕士学位证成绩单全套材料从防伪到印刷水印底纹到钢印烫金
二：真实使馆认证（留学人员回国证明）使馆存档
三：真实教育部认证教育部存档教育部留服网站可查
四：留信认证留学生信息网站可查
五：与学校颁发的相关证件1:1纸质尺寸制定（定期向各大院校毕业生购买最新版本毕,业证成绩单保证您拿到的是鲁昂大学内部最新版本毕业证成绩单微信95270640）
A.为什么留学生需要操作留信认证?
留信认证全称全国留学生信息服务网认证,隶属于北京中科院。①留信认证门槛条件更低,费用更美丽,并且包过,完单周期短,效率高②留信认证虽然不能去国企,但是一般的公司都没有问题,因为国内很多公司连基本的留学生学历认证都不了解。这对于留学生来说,这就比自己光拿一个证书更有说服力,因为留学学历可以在留信网站上进行查询!
B.为什么我们提供的毕业证成绩单具有使用价值？
查询留服认证是国内鉴别留学生海外学历的唯一途径但认证只是个体行为不是所有留学生都操作所以没有办理认证的留学生的学历在国内也是查询不到的他们也仅仅只有一张文凭。所以这时候我们提供的和学校颁发的一模一样的毕业证成绩单就有了使用价值。乌龟和王八贼头贼脑的倒也逗人喜爱日上三竿时山娃总爱窜进自家瓜棚里跟小伙伴们坐着聊天聊着聊着便忍不住往瓜田里逡巡一番抱起一只硕大的西瓜用石刀劈开抑或用拳头砸开每人抱起一大块就啃啃得满嘴满脸猴屁股般的红艳大家一个劲地指着对方吃吃地笑瓜裂得古怪奇形怪状却丝毫不影响瓜味甜丝丝的满嘴生津遍地都是瓜横七竖八的活像掷满了一地的大石块摘走二三只爷爷是断然发现不了的即便发现爷爷也不恼反而教山娃辨认孰熟孰嫩孰甜孰淡水
Golden Gate Bridge: Magnificent Architecture in San Francisco | CIO Women Mag...
The famous suspension bridge connects the city of San Francisco to Marin County in California. Golden Gate Bridge carries both U.S. Route 101 and California State Route 1 across the strait and is about one mile wide. In this article, we will explore the history and significance that have shaped the iconic monument it is known as today.
How To Change A Name On American Airlines Ticket.pptx
You can easily change/correct a name on your flight ticket under the American Airlines name change policy. The airline provides multiple online and offline modes to place a name change request. To learn more about how to change a name on American Airlines ticket, you can directly approach the airline’s customer support. Moreover, you can connect with a flight expert at +1-866-738-0741 for quick assistance.
Top 10 Tourist Places in South India to Explore.pdf
Get the information here about top 10 tourist places in South India to explore with your family or friends by a taxi booked from Bharat Taxi.
Nature of the task 1. write a paragraph about your trip to dubai and what ar...
1. write a paragraph about your trip to dubai and what are the facts responsible for the heavy rainfall in dubai that caused havec ?
2. mention any five major tourist attaction of dubai
Mathematics: a student a visit her family her father converted Rs. 1,15,000 inr currency for dubai airport theexpedite in the trip is given below
1. Curreny name of India and dubai
2. Conversions amount
3. Total Converted amount
4. cost of food
5. cost of sightseeing
6. cost of shoping
7. cost of saving
What Outdoor Adventures Await Young Adults in Montreal's Surrounding Nature
Experience Montreal's vibrant culture and thrilling outdoor adventures. From hiking scenic trails at Mont-Saint-Bruno to kayaking the Saint Lawrence River, there's something for every adventurous young adult. Explore street art, camp under the stars, and immerse yourself in nature's beauty just beyond the city's bustling streets.
How Do I Plan a Kilimanjaro Climb? 7 Essential Tips Revealed.pdf
How do I plan a Kilimanjaro Climb?
Planning to climb Mount Kilimanjaro is an exciting yet detailed process. Here’s a step-by-step guide to help you prepare for this incredible adventure.
5-Day Nathdwara Tour Itinerary: From Temples to Traditional Markets
Nathdwara is more than just a town; it’s a cultural and spiritual haven that offers a unique blend of history, art, and tradition.
Discover the Magic of Ibiza An Unforgettable Boat Trip
Ibiza, situated in the Balearic Islands, stands out as a destination that encompasses everything: stunning landscapes, hidden gems to explore, a vibrant social scene, rich cultural life, and exceptional gastronomy. Opting for ‘Ibiza Rent A Boat’ to experience an unforgettable vacation on the White Island is certainly worthwhile, prompting a deeper exploration of the unique and fascinating aspects of Ibiza.
Ready for Cold Weather Rafting Here's What to Wear to Stay Comfortable!
Ready for Cold Weather Rafting Here's What to Wear to Stay Comfortable!River Recreation - Washington Whitewater Rafting
Prepare for cold weather rafting with proper gear: layering for warmth, insulated headgear, gloves, waterproof footwear, and essential accessories like sunglasses and sunscreen. Prioritize safety with a life jacket and maintain gear for optimal performance. Stay warm, dry, and ready for adventure on the rapids!What Challenges Await Beginners in Snowshoeing
Discover the exhilarating world of snowshoeing through our presentation, highlighting the challenges faced by beginners. From physical exertion to technical finesse and braving harsh winter conditions, each step in the snow brings new obstacles and unforgettable adventures. Embrace the challenge and conquer the winter wonderland with confidence!
bangalore metro routes, stations, timings
Bangalore Metro, also known as Namma Metro, is a rapid transit system serving the city of Bangalore, Karnataka, India. It is the second longest operational metro network in India after the Delhi Metro.
Exploring the Majesty of Nepal: An Unforgettable Tour Experience
Beyond the mountains, a tour in Nepal reveals a vibrant tapestry of cultural heritage. The Kathmandu Valley, a UNESCO World Heritage Site, boasts an array of ancient temples, stupas, and palaces. Durbar Squares in Kathmandu, Bhaktapur, and Patan are treasure troves of medieval art and architecture.
Educational Tour Operators - Edutour.pdf
Edutour" is your premier choice for educational travel experiences, offering specialized tours for schools, colleges, universities, and enthusiasts alike. As a comprehensive educational tour operator, we cater to a diverse range of interests and destinations, ensuring unforgettable experiences that combine learning, exploration, and cultural immersion.
Explore Architectural Wonders and Vibrant Culture With Naples Tours
Discover the historical gems and vivid culture of Naples with our guided tours. From the vivid narrow streets of Spaccanapoli to the ancient ruins of Pompeii, the city offers a mixed bag of adventurous experiences. Book your tickets today https://www.naples.tours/ and experience the best of Naples!
Un viaje a Buenos Aires y sus alrededores
A travelogue of my recent trip to Argentina, most to Buenos Aires, but including excursion to Iguazú waterfalls, Tigre, and Colonia del Sacramento in Uruguay
The Ultimate Travel Guide to Hawaii Island Hopping in 2024
island hopping in Hawaii. This magical place offers a number of experiences, as each island has its own charm. Do you love adventure? Then, hike through volcanoes or kayak along an amazing coastline. If you want relaxation, then Hawaii is perfect because it has the most amazing beaches. In this blog, I will help you make an itinerary for your Hawaii Island Hopping. Every island offers something special. The Big Island offers some of the most perfect volcanoes as well as stargazing. Maui will pamper you with beaches and luxury. Kauai has some of the most lush rainforests with dramatic cliffs, and Oahu can offer a taste of city life and historical significance.
在线办理(BU毕业证书)波士顿大学毕业证录取通知书一模一样
学校原件一模一样【微信：741003700 】《(BU毕业证书)波士顿大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Recently uploaded (20)
Golden Gate Bridge: Magnificent Architecture in San Francisco | CIO Women Mag...
Golden Gate Bridge: Magnificent Architecture in San Francisco | CIO Women Mag...
How To Change A Name On American Airlines Ticket.pptx
How To Change A Name On American Airlines Ticket.pptx
Top 10 Tourist Places in South India to Explore.pdf
Top 10 Tourist Places in South India to Explore.pdf
Nature of the task 1. write a paragraph about your trip to dubai and what ar...
Nature of the task 1. write a paragraph about your trip to dubai and what ar...
What Outdoor Adventures Await Young Adults in Montreal's Surrounding Nature
What Outdoor Adventures Await Young Adults in Montreal's Surrounding Nature
How Do I Plan a Kilimanjaro Climb? 7 Essential Tips Revealed.pdf
How Do I Plan a Kilimanjaro Climb? 7 Essential Tips Revealed.pdf
5-Day Nathdwara Tour Itinerary: From Temples to Traditional Markets
5-Day Nathdwara Tour Itinerary: From Temples to Traditional Markets
Discover the Magic of Ibiza An Unforgettable Boat Trip
Discover the Magic of Ibiza An Unforgettable Boat Trip
Ready for Cold Weather Rafting Here's What to Wear to Stay Comfortable!
Ready for Cold Weather Rafting Here's What to Wear to Stay Comfortable!
Exploring the Majesty of Nepal: An Unforgettable Tour Experience
Exploring the Majesty of Nepal: An Unforgettable Tour Experience
Explore Architectural Wonders and Vibrant Culture With Naples Tours
Explore Architectural Wonders and Vibrant Culture With Naples Tours
The Ultimate Travel Guide to Hawaii Island Hopping in 2024
The Ultimate Travel Guide to Hawaii Island Hopping in 2024
Frame tutorial creo_baja_sae
- 1. FRAME MODELING IN CREO 2.0 José E. Lugo Aerospace and Mechanical Engineering University of Notre Dame
- 2. Open CREO 2.0 and Start a new Part file
- 3. Click: Model / Offset Coordinate System
- 4. Datum Point editor opens
- 6. Add points in the table: See next slide for values. After entering the values click OK.
- 7. Values for Points Point X Y Z Point X Y Z 0 10 0 0 12 10 15 0 1 -10 0 0 13 -10 15 0 2 10 0 -10 14 10 15 -10 3 -10 0 -10 15 -10 15 -10 4 10 0 -40 16 10 15 -40 5 -10 0 -40 17 -10 15 -40 6 10 0 -50 18 10 15 -50 7 -10 0 -50 19 -10 15 -50 8 10 0 0.75 20 10 15 0.75 9 -10 0 0.75 21 -10 15 0.75 10 10 0 -50.75 22 10 15 -50.75 11 -10 0 -50.75 23 -10 15 -50.75
- 8. Result should look like this.
- 9. Now we define the line skeleton, click on datum / curve / curve through points
- 10. Click the first point
- 11. Click the second point and then select Straight Line
- 12. Repeat until you build the whole frame
- 13. Result should look like this. Save the file and close it.
- 14. Create a new Assembly
- 15. Select Model / Assemble
- 16. Locate the part file that you just created.
- 17. Accept Default location and click ok.
- 19. Click on Create new project and name the project
- 20. Click on Profiles, then here
- 21. Click on Steel Inch
- 22. Click Pipe
- 23. Select desired element (e.g. 1.315 x 0.109)
- 24. Select Reference Method Between 2 points
- 25. Select two points then the datum plane (Base plane)
- 26. Repeat for other members
- 27. Click delete datum plane and select points of vertical members and A vertical plane
- 28. Add the following members, note that no line is needed to define a member just two points!
- 29. Result should look like this.
- 30. Look that members intersect other members!
- 31. Click Joints
- 33. 3 1 2 First select profile to cut (1) and then the cutting profile (2), Then select (1) then (3)
- 35. Repeat for other members
- 36. To perform these operations, designer should have an idea of how the frame is going to be built!
- 37. Finish FRAME!