Footwear sector has on average $ 352 billion worldwide and accounts for 17% of apparel spending in global retail footwear market. Every person in the world purchases an average of 2 footwear per year. The footwear market is expected to grow by 3.3% annually to reach 2021, $ 407 billion.
For you, we've compiled footwear production informations. You can give more information in http://turkishmach.com/ as write us.
2. Footwear production is made by many special
operations and skilled machines. This job, which used
time and skill, can now be done in less time and with
operations.
The global retail footwear market is on average $ 352
worldwide and accounts for 17% of apparel spending.
in the world purchases an average of 2 footwear per
footwear market is expected to grow by 3.3% annually
$ 407 billion.
4. • Cutting molds prepared for the shoes to be made are prepared. These cutting dies are mounted on the cutting presses and the
shoe parts are cut.
• Vacuum table is used to make the cutting process correctly.
• Alignment marks are added to properly combine the cut pieces.
FOOTWEAR CUTTING AND MARKING
5. • Footwear parts sew the parts of the shoe using the electric sewing machine. Depending on the shoe design, there may be differ ent
numbers of sewing machines on the sewing line.
• After sewing is completed, the shape of the finger box and heel counters are adjusted. For this, the thermoplastic counters i n the foot
and heel are heated and the shoe is compressed to adjust the shape.
FOOTWEAR SEAM
6. • In machines on the front of the line, steam is used to soften the shoes upper and prepare them permanently. The toe area is f itted in
the mold on the machine and the machine uses glue to fix the tops. After the shape becomes permanent, the shoes are passed
through the cooling tunnel.
• After the application, the parts are passed through a heat tunnel to be dried.
FOOTWEAR FORMING AND LINING
7. • The sole, top, sides and heel are compressed by the pressing machine. Depending on the shoe design, additions such as outer
seams and rubber outsole are made after this section. Finally, the shoe can be passed through the drying oven and the UV tunn el to
prevent the shoe from becoming moldy.
FOOTWEAR PRESSING
9. It is a group of machines used for mounting the front, back and sole
parts of the shoes to each other.
1. FOOTWEAR ASSEMBLY MACHINES
Consists of a series of die-cutting, die-combing and blade sharpening
machines to form inner molds of shoes.
2. FOOTWEAR INNER MOLDING MACHINES
These are the machines required for operations such as stretching,
aligning, gluing and drying the shoes.
3. INTERMEDIATE PROCESSING MACHINES
10. These are the machines that are required to combine the
pattern of the shoes and to get burrs, which vary in number
and type according to the shoe model.
4. FOOTWEAR SEWING MACHINES
This shoe making group consists of injection machines and
lining machines for forming sole and shoe sizes.
5. FOOTWEAR SOLE MACHINES