4. Introduction
• Cutting Machine is used for cutting out
parts of articles from layers of cloth card
webs or knitted fabric. The Technically
Possible depth of cutting of the layer
depends on the design of the cutting
machine.
11. Feature of hand scissors-
1.It is the 1st & oldest machine for
fabric cutting.
2. Very easy to operate.
3. Good for fancy cutting.
4.Most cheep machine.
5. Easy to handle & transfer.
12. Advantages of hand scissor-
1. Over head cost less.
2. Good for individual production.
3. Easy to operate.
4. Risk low.
5. Suitable for making sample
garments.
13. Disadvantages of hand scissor-
• Large production is not
possible.
• Need to grind rapidly.
• Time consuming method.
• Fabric wastage is very high.
14. Uses of hand scissors-
It is use for sharp cutting,
fancy production etc.
15. Drill Machine -
• Where reference marks are needed
away from the edge of a garment
part, such as for the position of
pockets, button hole, darts & similar
features, a hole is often drilled
through all the plies of fabric in the
day.
17. Feature of drill machine -
• The drill mounting includes a motor, a base
plate with a hole to allow the drill to pass
through.
• For tightly woven fabric the hole is
permanent for a long time.
18. Advantage of drill machine -
1.This machine is needed to
mark on the end of
components of dresses
specially for setting pocket,
dart & so on.
2.It can make the hole
permanently for a long.
19. THE USE OF MACHINE IS LIMITED.
Disadvantage of drill machine -
20. Uses of drill machine -
• It is used to make hole on the
fabric for button attaching & to
make reference mark for
attaching different small
components on the garments.
21. OLFA Rotary Circle fabric cutter-
• There are three main parts.
The 1st on uses is rotary blade. In which on
18 mm. And same many rotary curve uses. The
rotary blade is very sharp.
And 2nd on is rotary compass point. Its
have a safety cafe bowknot. That is size of circle.
The 3rd on is raced handle in which is
cycling. The many raced rang uses at home. But
the 3rd on is uses specially secretly. Because its
mainly maintain the perfect size (as like as
compass).
23. Advantages OLFA rotary circle fabric
cutter -
1.It is easy to cut.
2.It is a simple process.
3.It is helpful.
4.It is good measurement.
5.It is save money.
24. Disadvantages OLFA rotary circle fabric
cutter -
•1st we noted it not
uses in germens.
•Need to high time.
25. MAINLY IT USES DISENABLE MATERIALS,
AND FASHION DESIGNING.
Uses
of OLFA rotary circle fabric cutter -
26. Round knife cutting machine -
• This machine is called round knife cutting
machine because its cutter is round but
slightly octagonal in shape. This is small in
size, flexible & used for small production. It is
also a popular cutting machine.
28. Feature of Round knife cutting
machine -
• Knife diameter varies from 6-20 CM.
• Manual grinder is used.
• Motor R.P.M is 800-1600.
• Base plate gives support for fabric.
• Knife is lubricating manually.
29. Advantage of round knife cutting
machine -
• To cut the large part of the
garments.
• Easy to handle & operate.
• Suitable for small scale cutting.
• Suitable for gentle curve line
cutting.
30. Disadvantage of round knife cutting
machine -
• Very low R.P.M.
• Very low knife height.
• Manual grinder is used.
• Lubrication is manually done.
• Difficult to cut.
31. Calculation
Cutting is most importance in
garments manufacturing. It is easy
to cut fabric. A lot of cutter machine
uses in cut fabric. And finally
progress to next process.
