Fly Smarter - Intelligent Power System & Starter Generators from ePropelled
•
0 likes•25 views
IPS 3000 from ePropelled is a 3000 Watt Intelligent Power Systems are a complete power management solution for your aircraft. They provide steady regulated DC power for your on-board avionics, servo and payload requirements. These smart power systems also provide a wide array of real-time performance and operational data for a range of useful applications and analytics.
Report
Share
Report
Share
Download to read offline
Recommended
Fly Smarter - Intelligent Power System & Starter Generators from ePropelled
3000-Watt ePropelled Intelligent Power Systems are a complete power management solution for your aircraft. They provide steady regulated DC power for your on-board avionics, servo and payload requirements. These
smart power systems also provide a wide array of real-time performance and operational data for a range of useful applications and analytics.
Motion control application for wind turbine
Elmo's Tiger 50/600 and Eagle 35/200 digital servo drives provide a solution for controlling the blades of wind turbines. The Tiger drive is the main controller and connects directly to the power grid. The Eagle provides backup in emergencies. Both drives precisely control the blade motors and switch control between them if needed. Elmo's distributed intelligence and high power density in compact drives make their solution reliable for wind turbines.
000750
The BA6229 is a monolithic integrated circuit used for driving reversible motors. It contains a logic section that can set brake and open modes and an output transistor that controls forward and reverse motor operations. Some key features include a built-in power transistor for motor driving up to 1.2A, operation from 8-23V supply voltage, and four output modes for forward, reverse, stop, and brake functions.
Aircraft
The document provides an overview of aircraft electrical systems. It discusses how electrical energy became widely used in aircraft to power various systems, starting with magnetos to spark engines and later expanding to include generators, batteries, and electrical components. Modern aircraft rely heavily on electrical systems, using different voltages of DC and AC power. Electrical wiring now accounts for over 100,000 wires with a total length of 470 km to power critical flight instruments, essential systems, and passenger services.
Product: Battery Monitoring: FirstLine BMS
The FirstLine Wireless BMS from Staco Energy Products Co. allows for real-time monitoring of battery voltages, impedances, temperatures, currents and other metrics. It uses RF communication and easy installation to reduce costs. Data is displayed on a graphic touchscreen and stored in databases for viewing histories, reports and event logs. Alarms can be sent by email or dry contact when programmable limits are exceeded.
MINI ELECTRICAL PROJECT
This report details a circuit designed by Ananthavignesh M that uses various integrated circuits, transistors, LEDs, and other components to allow for electrical equipment control using a mobile phone. The circuit diagram and block diagram are presented, and applications are discussed such as lighting/appliance control, security systems, entertainment systems, thermostats, irrigation, and more. Potential future aspects mentioned include industrial automation using computers and microcontroller-based pre-programmed systems.
Detecting Power Grid Synchronization Failure on Sensing Frequency or Voltage ...
Detecting Power Grid Synchronization Failure on Sensing Frequency or Voltage ...Edgefxkits & Solutions
Synchronization means the minimization of difference in voltage, frequency and phase angle between the corresponding phases of the generator output and grid supply. An alternating current generator must be synchronized with the grid prior to connection. It can’t deliver the power unless it is running at same frequency as the network. Energy in Factory Automation and the Role of Industrial Networks
In today’s world energy cost big dollars for manufactures and the fact is most plants don’t know where there energy is being used. To help with this problem the Industrial Network communities are providing common interfaces to gather and control energy in the industrial space. This presentation will focus on aspects of Energy where it relates to Industrial Automation and some of the challenges we face. We will also cover upcoming initiative for interfacing to the smart grid for demand response request.
Recommended
Fly Smarter - Intelligent Power System & Starter Generators from ePropelled
3000-Watt ePropelled Intelligent Power Systems are a complete power management solution for your aircraft. They provide steady regulated DC power for your on-board avionics, servo and payload requirements. These
smart power systems also provide a wide array of real-time performance and operational data for a range of useful applications and analytics.
Motion control application for wind turbine
Elmo's Tiger 50/600 and Eagle 35/200 digital servo drives provide a solution for controlling the blades of wind turbines. The Tiger drive is the main controller and connects directly to the power grid. The Eagle provides backup in emergencies. Both drives precisely control the blade motors and switch control between them if needed. Elmo's distributed intelligence and high power density in compact drives make their solution reliable for wind turbines.
000750
The BA6229 is a monolithic integrated circuit used for driving reversible motors. It contains a logic section that can set brake and open modes and an output transistor that controls forward and reverse motor operations. Some key features include a built-in power transistor for motor driving up to 1.2A, operation from 8-23V supply voltage, and four output modes for forward, reverse, stop, and brake functions.
Aircraft
The document provides an overview of aircraft electrical systems. It discusses how electrical energy became widely used in aircraft to power various systems, starting with magnetos to spark engines and later expanding to include generators, batteries, and electrical components. Modern aircraft rely heavily on electrical systems, using different voltages of DC and AC power. Electrical wiring now accounts for over 100,000 wires with a total length of 470 km to power critical flight instruments, essential systems, and passenger services.
Product: Battery Monitoring: FirstLine BMS
The FirstLine Wireless BMS from Staco Energy Products Co. allows for real-time monitoring of battery voltages, impedances, temperatures, currents and other metrics. It uses RF communication and easy installation to reduce costs. Data is displayed on a graphic touchscreen and stored in databases for viewing histories, reports and event logs. Alarms can be sent by email or dry contact when programmable limits are exceeded.
MINI ELECTRICAL PROJECT
This report details a circuit designed by Ananthavignesh M that uses various integrated circuits, transistors, LEDs, and other components to allow for electrical equipment control using a mobile phone. The circuit diagram and block diagram are presented, and applications are discussed such as lighting/appliance control, security systems, entertainment systems, thermostats, irrigation, and more. Potential future aspects mentioned include industrial automation using computers and microcontroller-based pre-programmed systems.
Detecting Power Grid Synchronization Failure on Sensing Frequency or Voltage ...
Detecting Power Grid Synchronization Failure on Sensing Frequency or Voltage ...Edgefxkits & Solutions
Synchronization means the minimization of difference in voltage, frequency and phase angle between the corresponding phases of the generator output and grid supply. An alternating current generator must be synchronized with the grid prior to connection. It can’t deliver the power unless it is running at same frequency as the network. Energy in Factory Automation and the Role of Industrial Networks
In today’s world energy cost big dollars for manufactures and the fact is most plants don’t know where there energy is being used. To help with this problem the Industrial Network communities are providing common interfaces to gather and control energy in the industrial space. This presentation will focus on aspects of Energy where it relates to Industrial Automation and some of the challenges we face. We will also cover upcoming initiative for interfacing to the smart grid for demand response request.
RTU Sheet
An Electronically Commutated Motor (ECM) is more efficient than standard induction motors for rooftop package units. The ECM is a permanent magnet motor with fewer losses. It can be programmed to operate at variable speeds depending on the advanced control parameters of the rooftop unit. The advanced control will evaluate thermostat calls and outdoor conditions to decide the operating mode and optimize airflow while providing energy savings by reducing motor speed. Installing an ECM could save over 15,000 kWh per year and $1,724, reducing energy use by 74% compared to a standard induction motor running at full speed for all functions.
Asc 4 data sheet 4921240529 uk (1)
The document is a data sheet for the Automatic Sustainable Controller ASC-4, which integrates photovoltaic power plants, battery energy storage systems, and conventional power plants. The ASC-4 Solar controller maximizes sustainable power penetration and ensures minimum genset load. The ASC-4 Battery controller integrates electrical storage and can instruct gensets to stop when the battery supplies the load. The data sheet provides technical specifications for the ASC-4, including accuracy, temperature range, voltage and current measurement ranges, input/output details, and supported inverters and batteries.
EDIBON Energy Units
The document describes several technical teaching units for smart grids: the Final User Smart Grid (AEL-FUSG) unit focuses on the consumer side of smart grids; the Advanced Power Factor Controller (EECFP) and Advanced Digital Synchronization Trainer (EESD) units focus on specific aspects of electricity transport and supply; the Smart Grid Trainer (SG/ESN, SG/C) and Advanced Smart Grid Trainer (ASG3) units demonstrate a complete smart grid system from generation to consumption. These units can be controlled and visualized using the SCADA system and SCADA-Net software, allowing multiple students to remotely access and operate the units simultaneously.
Ups battery monitoring system over gsm by humayun kobir
This document presents a project on a UPS battery monitoring system over GSM. The system monitors UPS battery voltage levels and sends SMS alerts to mobile phones if the voltage drops below a threshold. It consists of a PIC microcontroller, GSM module, relays, voltage regulator, and other components. The system continuously monitors battery voltages and will send SMS notifications if the mains power fails or a battery falls below 10.5 volts, allowing remote monitoring of the UPS from any location.
Classification of electric motors
The document discusses the classification of electric motors. It begins by explaining the main types of motors as AC motors and DC motors. DC motors are then discussed in more detail, including their advantages of precise speed control but disadvantages of brush wear. The main types of DC motors are described as brushed DC motors and brushless DC motors. Brushed DC motors are further divided into permanent magnet, shunt-wound, series-wound, compound-wound, and separately excited DC motors. Construction and characteristics of each type are provided.
E bike bldc motor test set up
BLDC Motor Performance & Endurance Test Set up, consist Various types of Dynamometers & Control configurations as Manual Torque Control, PLC Controlled, PC Based Data Acquisition.
BLDC Motors, as they are compact in size, lighter in weight & Most Efficient than other Electric Motors, They are used as Hub Motor Electric Vehicles –Scooters, Electric Bicycle, BLDC Shafted Motors for Solar Power Submersible Pumps, Sump Pumps, for various applications in Automotive, Aerospace, Military, Medical, Lifts, Cranes, Elevators,
Air Condition & Refrigerator Compressors, Fans, Cleaners-Scrubbers, Sweepers, Lawn movers, Trade mills & fitness equipments & many more applications.
Dynamometers employed to test motors are:
Powder Dynamometers, Eddy Current dynamometers, Tandem Dynamometers, AC Regenerative dynamometers,
DC regenerative dynamometers.
Our Proprietary APPSYS MOTOR TEST software developed, using National Instruments LabView Platform, for BLDC Motor test, to monitor & display Motor Electrical Input Power, Mechanical Output Power,Motor Efficiency, Input Voltage, Current, Power Factor, Motor No Load Current, Full Load Current,No Load & Full Load Speed, No Load & Full Load Torque,Motor temperature, Bearing temperature, Winding temperature, etc.
PC based Motor test set up consist: Window XP /Win7 operating systems, PC hardware & PCI Data Card with necessary Digital & Analogueinputs & outputs, Power analyzer, Electrical Input Power (Motor Power Sensor to sense Motor Power -To monitor Motorelectrical Input Power & for Calculation of efficiency) & Mechanical Output Power –Speed &Torque, Efficiency are displayed on Monitor & stored in tabular form &graphs in MS Excel format.
PC Auto & PC Manual mode selector Soft push button switch on Monitorscreen. In PC Auto mode, Data is captured on predetermined (Site settable) time & Torque Loading in 100 steps (independently settable), whereas in PCManual mode –Data is captured manually by pressing data capture soft buttonon screen. Captured data is exported to MS Excel in Table forms & inGraphs form to showTorque-Speed characteristics, Torque-Current and Speed-Current, Efficiency characteristics,Torque-Speed Oscillations at steady stateTorque at different temperatures, Temp measurements etc.& custom characteristics required by clients.
Accessories such as Motor Temperature, Winding Temperature measurements, Motors mounting Test bed, Test Stands with T slot having X, Y & Z adjustment for Length, Width & Height adjustments is also offered along with dynamometer
Ni project presentation version 3
The document summarizes a project using a National Instruments Single Board RIO General Purpose Inverter Controller (GPIC) to implement a 3-phase inverter and variable frequency drive. It describes the hardware components, LabVIEW code, simulations, challenges faced, and solutions implemented. The project involved using the GPIC Inverter Research Board to generate 3-phase AC power from DC to drive a motor, with the goal of implementing variable frequency control. Various issues were addressed, such as insufficient voltage levels, sensor faults, and transformer limitations.
Electrical 2
The document summarizes the electrical system of a CN-235 CASA aircraft. The system uses two 24V 40Ah nickel-cadmium batteries to power systems and start engines. It can also connect to an external 28V DC ground power unit. The aircraft has two starter generators that each supply 28V 400A of continuous power. A transformer-rectifier converts 115V AC to 28V DC power.
Power Grid Control System
This document describes a project to remotely control up to 8 power grids using a mobile phone. Key components include an 8051 microcontroller interfaced with a GSM modem to receive control messages and authenticate user numbers. The microcontroller verifies authentication and controls relays connected to electrical equipment. An EEPROM stores grid positions to prevent data loss during power failures. The system allows remote control of power grids from any location via mobile phone.
A solar fed BLDC motor drive for mixer grinder using a buck converter
In large and small scale applications, different kinds of variable speed driving systems can be found. For saving the energy consumption of these devices, eco-friendly electronics are used, which lead to the development of the Brushless DC motor (BLDC). Its higher power density, higher efficiency, higher torque at low speed, and low maintenance enhances the use of a BLDC motor. The existing mixer grinder consists of the universal motor, which operates in alternating current supply due to high starting torque characteristics and simple controlling of the speed. The absence of brushes and the reduction of noise in the BLDC extends its life and makes it ideal in a mixer grinder. A solar-powered BLDC motor drive for a mixer grinder is presented in this paper. A DC-DC buck converter is utilized to operate the PV (photovoltaic) array at its maximum power. The proposed hysteresis current control BLDC system has been developed in the MATLAB. The commercially available mixer grinder is presented along with the proposed simulated system for performance comparison. It can be concluded that at the no load condition, the efficiency of the experimental existing mixer grinder is 51.03% and simulated proposed system is 81.25% and at load condition, the efficiency of the experimental mixer grinder is 49.32% and simulated system is 79.85%.
Ride Through Systems V1_00_jan2008_PPT
Hitec Power Protection provides battery-free rotary uninterruptible power supply (UPS) systems called Ride Through systems. These systems provide continuous high quality power with 100% uptime for mission critical processes. They offer reliability over 50 years of experience, proven track record across industries, and lowest total cost of ownership. As environmental friendly solutions, they act as voltage/frequency filters to deliver secured continuity during power disturbances less than 15 seconds through a flywheel energy storage system.
IRJET- Power Quality Improvement in SEIG
This document summarizes research on improving power quality in self-excited induction generators (SEIGs). SEIGs are becoming more popular for renewable energy sources due to advantages over synchronous generators, but have drawbacks of reactive power consumption and variable voltage regulation. The document discusses how static power capacitors can control SEIG output voltage and synchronous condensers can control reactive power consumption. It then reviews literature on SEIG control methods and proposes a system using switched capacitors to regulate voltage and a resistive dump load controlled by a microcontroller to regulate voltage and frequency under varying conditions from the prime mover. The system aims to provide low-cost power for isolated areas using SEIGs.
IEEE Electrical Engineering projects for Bangalore Students for Academic year...
IGSLABS Technologies Pvt Ltd provides electrical engineering projects for the academic year 2013-14 related to renewable energy, automation, wireless sensor networks, and more. Some example projects listed include a remote virtual lab for research and design using wireless technology, building lighting automation through wireless sensor networks, and a smart maintenance system for electrical machines. The company is located in India and can be contacted via their website or by phone and email.
DETECTING POWER GRID SYNCHRONISATION FAILURE ON SENSING BAD VOLTAGE OR FREQUE...
The project is designed to develop a system to detect the synchronization failure of any external supply source to the power grid on sensing the abnormalities in frequency and voltage.
There are several power generation units connected to the grid such as hydel, thermal, solar etc to supply power to the load. These generating units need to supply power according to the rules of the grid. These rules involve maintaining a voltage variation within limits and also the frequency. If any deviation from the acceptable limit of the grid it is mandatory that the same feeder should automatically get disconnected from the grid which by effect is termed as islanding. This prevents in large scale brown out or black out of the grid power. So it is preferable to have a system which can warn the grid in advance so that alternate arrangements are kept on standby to avoid complete grid failure.
Power grid synchronization failure detection and recovery
Abstract As the power grid failure problems continue to persist in the country, need arises to make it more efficient and effective. This is a
demonstration devised to provide such kind of a system that could detect the failure in synchronous working of the power grid in
case any external supply source that is supplying to the grid is encountering any kind of abnormalities may be in current levels,
voltage levels, temperature and oil level. There are various generation units that usually supply power to the grids such as
thermal plants, solar plants, hydro-electric plants etc. All the generation units that connect to the grid have to obey the rules or
standards laid down for the operation of a grid. These rules involve maintaining of voltage variation, current variation, oil-level
variation and temperature variation within these specified limits. If there are any kind of abnormalities or deviations from the
acceptable limits laid down by the grid, it then gets crucial that the particular feeding source should get automatically
disconnected from the entire grid temporarily, this process is widely termed islanding. This would prevent large scale occurrences
of events of black outs. Hence it would be beneficial and wise if we could have a system that would be so efficient that it could
issue intimations about the potential variations in the arrangements and in addition provide the exact distance of the fault
location on a feeder line from the base grid and keep the particular source temporarily on a standby basis while this process takes
place. Variation of the system voltage should be around +-5% as per central electricity authority of India Regulations, 2010. This
paper is an approach on devising out a system that helps the grid resolve problems related to black out situations hence making it
a smart grid.
Keywords: - current variation, voltage variation, temperature variation, oil level detection, islanding, smart grid,
active method, passive method.
Cn 235 ac power systems
The document summarizes the AC power system on a CASA CN-235 aircraft. It has two alternators that each supply 115VAC 3-phase 400Hz power, which is used for engine air inlet anti-icing and a 28VDC auxiliary system. A transformer/rectifier converts the AC power to 28VDC. Inverters then convert the 28VDC back to 115VAC 3-phase 400Hz for other uses. The system relies on two alternators and three inverters to generate and regulate AC power from the engines.
Electronic Circuit Breaker
This document describes an electronic circuit breaker that uses a microcontroller to detect overcurrent conditions and trip the circuit faster than a traditional thermal circuit breaker. It senses current using a current transformer, converts the analog signal to digital with an ADC for the microcontroller to compare to a preset threshold. If the current exceeds the threshold, an optocoupler activates a triac to disconnect the load within microseconds. This provides faster protection than thermal circuit breakers, which can take longer to trip depending on the percentage of overload. The microcontroller used is an ATiny85 and the optocoupler and triac components are MOC3041 devices, which isolate the microcontroller from the AC supply. Testing showed the electronic circuit
Efficient Energy Harvesting and Transmission using Wireless Sensor Networks
This document summarizes a research paper on efficient energy harvesting and transmission using wireless sensor networks. It discusses using a Peltier sensor to convert wasted heat energy from vehicles into electricity. A boost converter is used to increase the voltage, which is then wirelessly transmitted via RF signals to a receiver and stored in an external battery. The energy contribution is added to the user's account and can be used to purchase fuel. An Internet of Things system monitors and stores the sensor data. The research aims to effectively utilize wasted heat energy from vehicles to generate electricity and provide incentives for energy generation.
9E_Datasheet-RevB-LD
The document summarizes the Eaton 9E UPS system, which provides reliable power protection and management for infrastructure and IT equipment. It comes in power ratings from 6kVA to 20kVA, uses an online double conversion topology for power quality, and can power more servers than similar UPS systems due to its 0.8 power factor. The UPS includes an LCD interface for status information, communication ports and slots for remote management, and compatibility with major operating systems and software. It also offers flexibility through an internal bypass, optional combo inputs, and the ability to add external battery modules for extended backup times.
Ankita
This document summarizes the key components and processes at a thermal power plant in West Bengal, India. It discusses how thermal power plants generate over 65% of India's electricity and describes the various power plants operated by WBPDCL, including their total installed capacities. It then provides details on the main equipment used, including the coal handling plant, boiler, turbine, cooling tower, ash handling plant, and electrical components like the PLCC, PLC, transformers, switchyard, and grid.
PC 3-fāžu UPS izvēles iespējas ražošanas uzņēmumu vajadzībām
This document discusses 3-phase uninterruptible power supply (UPS) options for manufacturing companies. It begins by explaining that over 50% of critical load failures are due to issues with the electrical supply, so UPS systems are vital to protect sensitive digital technologies from power problems. The document then provides an overview of different UPS product lines that are designed for applications ranging from small to extra-large loads. It focuses on Schneider Electric's Galaxy VM UPS system, describing its modular design, efficiency modes, display interface, testing capabilities, and flexibility for meeting various customer needs.
Nf ac power_supply_e_kp3000_s_gs_denkei
This catalog describes programmable AC/DC power sources models KP3000S and KP3000GS. The KP3000S is a basic single phase model, while the KP3000GS includes additional standard features like sequence and simulation functions. Both models provide 3 kVA AC and 3 kW DC output capacity. They offer stable output for various loads and testing applications. Interface options allow integration into automated test systems.
More Related Content
What's hot
RTU Sheet
An Electronically Commutated Motor (ECM) is more efficient than standard induction motors for rooftop package units. The ECM is a permanent magnet motor with fewer losses. It can be programmed to operate at variable speeds depending on the advanced control parameters of the rooftop unit. The advanced control will evaluate thermostat calls and outdoor conditions to decide the operating mode and optimize airflow while providing energy savings by reducing motor speed. Installing an ECM could save over 15,000 kWh per year and $1,724, reducing energy use by 74% compared to a standard induction motor running at full speed for all functions.
Asc 4 data sheet 4921240529 uk (1)
The document is a data sheet for the Automatic Sustainable Controller ASC-4, which integrates photovoltaic power plants, battery energy storage systems, and conventional power plants. The ASC-4 Solar controller maximizes sustainable power penetration and ensures minimum genset load. The ASC-4 Battery controller integrates electrical storage and can instruct gensets to stop when the battery supplies the load. The data sheet provides technical specifications for the ASC-4, including accuracy, temperature range, voltage and current measurement ranges, input/output details, and supported inverters and batteries.
EDIBON Energy Units
The document describes several technical teaching units for smart grids: the Final User Smart Grid (AEL-FUSG) unit focuses on the consumer side of smart grids; the Advanced Power Factor Controller (EECFP) and Advanced Digital Synchronization Trainer (EESD) units focus on specific aspects of electricity transport and supply; the Smart Grid Trainer (SG/ESN, SG/C) and Advanced Smart Grid Trainer (ASG3) units demonstrate a complete smart grid system from generation to consumption. These units can be controlled and visualized using the SCADA system and SCADA-Net software, allowing multiple students to remotely access and operate the units simultaneously.
Ups battery monitoring system over gsm by humayun kobir
This document presents a project on a UPS battery monitoring system over GSM. The system monitors UPS battery voltage levels and sends SMS alerts to mobile phones if the voltage drops below a threshold. It consists of a PIC microcontroller, GSM module, relays, voltage regulator, and other components. The system continuously monitors battery voltages and will send SMS notifications if the mains power fails or a battery falls below 10.5 volts, allowing remote monitoring of the UPS from any location.
Classification of electric motors
The document discusses the classification of electric motors. It begins by explaining the main types of motors as AC motors and DC motors. DC motors are then discussed in more detail, including their advantages of precise speed control but disadvantages of brush wear. The main types of DC motors are described as brushed DC motors and brushless DC motors. Brushed DC motors are further divided into permanent magnet, shunt-wound, series-wound, compound-wound, and separately excited DC motors. Construction and characteristics of each type are provided.
E bike bldc motor test set up
BLDC Motor Performance & Endurance Test Set up, consist Various types of Dynamometers & Control configurations as Manual Torque Control, PLC Controlled, PC Based Data Acquisition.
BLDC Motors, as they are compact in size, lighter in weight & Most Efficient than other Electric Motors, They are used as Hub Motor Electric Vehicles –Scooters, Electric Bicycle, BLDC Shafted Motors for Solar Power Submersible Pumps, Sump Pumps, for various applications in Automotive, Aerospace, Military, Medical, Lifts, Cranes, Elevators,
Air Condition & Refrigerator Compressors, Fans, Cleaners-Scrubbers, Sweepers, Lawn movers, Trade mills & fitness equipments & many more applications.
Dynamometers employed to test motors are:
Powder Dynamometers, Eddy Current dynamometers, Tandem Dynamometers, AC Regenerative dynamometers,
DC regenerative dynamometers.
Our Proprietary APPSYS MOTOR TEST software developed, using National Instruments LabView Platform, for BLDC Motor test, to monitor & display Motor Electrical Input Power, Mechanical Output Power,Motor Efficiency, Input Voltage, Current, Power Factor, Motor No Load Current, Full Load Current,No Load & Full Load Speed, No Load & Full Load Torque,Motor temperature, Bearing temperature, Winding temperature, etc.
PC based Motor test set up consist: Window XP /Win7 operating systems, PC hardware & PCI Data Card with necessary Digital & Analogueinputs & outputs, Power analyzer, Electrical Input Power (Motor Power Sensor to sense Motor Power -To monitor Motorelectrical Input Power & for Calculation of efficiency) & Mechanical Output Power –Speed &Torque, Efficiency are displayed on Monitor & stored in tabular form &graphs in MS Excel format.
PC Auto & PC Manual mode selector Soft push button switch on Monitorscreen. In PC Auto mode, Data is captured on predetermined (Site settable) time & Torque Loading in 100 steps (independently settable), whereas in PCManual mode –Data is captured manually by pressing data capture soft buttonon screen. Captured data is exported to MS Excel in Table forms & inGraphs form to showTorque-Speed characteristics, Torque-Current and Speed-Current, Efficiency characteristics,Torque-Speed Oscillations at steady stateTorque at different temperatures, Temp measurements etc.& custom characteristics required by clients.
Accessories such as Motor Temperature, Winding Temperature measurements, Motors mounting Test bed, Test Stands with T slot having X, Y & Z adjustment for Length, Width & Height adjustments is also offered along with dynamometer
Ni project presentation version 3
The document summarizes a project using a National Instruments Single Board RIO General Purpose Inverter Controller (GPIC) to implement a 3-phase inverter and variable frequency drive. It describes the hardware components, LabVIEW code, simulations, challenges faced, and solutions implemented. The project involved using the GPIC Inverter Research Board to generate 3-phase AC power from DC to drive a motor, with the goal of implementing variable frequency control. Various issues were addressed, such as insufficient voltage levels, sensor faults, and transformer limitations.
Electrical 2
The document summarizes the electrical system of a CN-235 CASA aircraft. The system uses two 24V 40Ah nickel-cadmium batteries to power systems and start engines. It can also connect to an external 28V DC ground power unit. The aircraft has two starter generators that each supply 28V 400A of continuous power. A transformer-rectifier converts 115V AC to 28V DC power.
Power Grid Control System
This document describes a project to remotely control up to 8 power grids using a mobile phone. Key components include an 8051 microcontroller interfaced with a GSM modem to receive control messages and authenticate user numbers. The microcontroller verifies authentication and controls relays connected to electrical equipment. An EEPROM stores grid positions to prevent data loss during power failures. The system allows remote control of power grids from any location via mobile phone.
A solar fed BLDC motor drive for mixer grinder using a buck converter
In large and small scale applications, different kinds of variable speed driving systems can be found. For saving the energy consumption of these devices, eco-friendly electronics are used, which lead to the development of the Brushless DC motor (BLDC). Its higher power density, higher efficiency, higher torque at low speed, and low maintenance enhances the use of a BLDC motor. The existing mixer grinder consists of the universal motor, which operates in alternating current supply due to high starting torque characteristics and simple controlling of the speed. The absence of brushes and the reduction of noise in the BLDC extends its life and makes it ideal in a mixer grinder. A solar-powered BLDC motor drive for a mixer grinder is presented in this paper. A DC-DC buck converter is utilized to operate the PV (photovoltaic) array at its maximum power. The proposed hysteresis current control BLDC system has been developed in the MATLAB. The commercially available mixer grinder is presented along with the proposed simulated system for performance comparison. It can be concluded that at the no load condition, the efficiency of the experimental existing mixer grinder is 51.03% and simulated proposed system is 81.25% and at load condition, the efficiency of the experimental mixer grinder is 49.32% and simulated system is 79.85%.
Ride Through Systems V1_00_jan2008_PPT
Hitec Power Protection provides battery-free rotary uninterruptible power supply (UPS) systems called Ride Through systems. These systems provide continuous high quality power with 100% uptime for mission critical processes. They offer reliability over 50 years of experience, proven track record across industries, and lowest total cost of ownership. As environmental friendly solutions, they act as voltage/frequency filters to deliver secured continuity during power disturbances less than 15 seconds through a flywheel energy storage system.
IRJET- Power Quality Improvement in SEIG
This document summarizes research on improving power quality in self-excited induction generators (SEIGs). SEIGs are becoming more popular for renewable energy sources due to advantages over synchronous generators, but have drawbacks of reactive power consumption and variable voltage regulation. The document discusses how static power capacitors can control SEIG output voltage and synchronous condensers can control reactive power consumption. It then reviews literature on SEIG control methods and proposes a system using switched capacitors to regulate voltage and a resistive dump load controlled by a microcontroller to regulate voltage and frequency under varying conditions from the prime mover. The system aims to provide low-cost power for isolated areas using SEIGs.
IEEE Electrical Engineering projects for Bangalore Students for Academic year...
IGSLABS Technologies Pvt Ltd provides electrical engineering projects for the academic year 2013-14 related to renewable energy, automation, wireless sensor networks, and more. Some example projects listed include a remote virtual lab for research and design using wireless technology, building lighting automation through wireless sensor networks, and a smart maintenance system for electrical machines. The company is located in India and can be contacted via their website or by phone and email.
DETECTING POWER GRID SYNCHRONISATION FAILURE ON SENSING BAD VOLTAGE OR FREQUE...
The project is designed to develop a system to detect the synchronization failure of any external supply source to the power grid on sensing the abnormalities in frequency and voltage.
There are several power generation units connected to the grid such as hydel, thermal, solar etc to supply power to the load. These generating units need to supply power according to the rules of the grid. These rules involve maintaining a voltage variation within limits and also the frequency. If any deviation from the acceptable limit of the grid it is mandatory that the same feeder should automatically get disconnected from the grid which by effect is termed as islanding. This prevents in large scale brown out or black out of the grid power. So it is preferable to have a system which can warn the grid in advance so that alternate arrangements are kept on standby to avoid complete grid failure.
Power grid synchronization failure detection and recovery
Abstract As the power grid failure problems continue to persist in the country, need arises to make it more efficient and effective. This is a
demonstration devised to provide such kind of a system that could detect the failure in synchronous working of the power grid in
case any external supply source that is supplying to the grid is encountering any kind of abnormalities may be in current levels,
voltage levels, temperature and oil level. There are various generation units that usually supply power to the grids such as
thermal plants, solar plants, hydro-electric plants etc. All the generation units that connect to the grid have to obey the rules or
standards laid down for the operation of a grid. These rules involve maintaining of voltage variation, current variation, oil-level
variation and temperature variation within these specified limits. If there are any kind of abnormalities or deviations from the
acceptable limits laid down by the grid, it then gets crucial that the particular feeding source should get automatically
disconnected from the entire grid temporarily, this process is widely termed islanding. This would prevent large scale occurrences
of events of black outs. Hence it would be beneficial and wise if we could have a system that would be so efficient that it could
issue intimations about the potential variations in the arrangements and in addition provide the exact distance of the fault
location on a feeder line from the base grid and keep the particular source temporarily on a standby basis while this process takes
place. Variation of the system voltage should be around +-5% as per central electricity authority of India Regulations, 2010. This
paper is an approach on devising out a system that helps the grid resolve problems related to black out situations hence making it
a smart grid.
Keywords: - current variation, voltage variation, temperature variation, oil level detection, islanding, smart grid,
active method, passive method.
Cn 235 ac power systems
The document summarizes the AC power system on a CASA CN-235 aircraft. It has two alternators that each supply 115VAC 3-phase 400Hz power, which is used for engine air inlet anti-icing and a 28VDC auxiliary system. A transformer/rectifier converts the AC power to 28VDC. Inverters then convert the 28VDC back to 115VAC 3-phase 400Hz for other uses. The system relies on two alternators and three inverters to generate and regulate AC power from the engines.
Electronic Circuit Breaker
This document describes an electronic circuit breaker that uses a microcontroller to detect overcurrent conditions and trip the circuit faster than a traditional thermal circuit breaker. It senses current using a current transformer, converts the analog signal to digital with an ADC for the microcontroller to compare to a preset threshold. If the current exceeds the threshold, an optocoupler activates a triac to disconnect the load within microseconds. This provides faster protection than thermal circuit breakers, which can take longer to trip depending on the percentage of overload. The microcontroller used is an ATiny85 and the optocoupler and triac components are MOC3041 devices, which isolate the microcontroller from the AC supply. Testing showed the electronic circuit
Efficient Energy Harvesting and Transmission using Wireless Sensor Networks
This document summarizes a research paper on efficient energy harvesting and transmission using wireless sensor networks. It discusses using a Peltier sensor to convert wasted heat energy from vehicles into electricity. A boost converter is used to increase the voltage, which is then wirelessly transmitted via RF signals to a receiver and stored in an external battery. The energy contribution is added to the user's account and can be used to purchase fuel. An Internet of Things system monitors and stores the sensor data. The research aims to effectively utilize wasted heat energy from vehicles to generate electricity and provide incentives for energy generation.
9E_Datasheet-RevB-LD
The document summarizes the Eaton 9E UPS system, which provides reliable power protection and management for infrastructure and IT equipment. It comes in power ratings from 6kVA to 20kVA, uses an online double conversion topology for power quality, and can power more servers than similar UPS systems due to its 0.8 power factor. The UPS includes an LCD interface for status information, communication ports and slots for remote management, and compatibility with major operating systems and software. It also offers flexibility through an internal bypass, optional combo inputs, and the ability to add external battery modules for extended backup times.
Ankita
This document summarizes the key components and processes at a thermal power plant in West Bengal, India. It discusses how thermal power plants generate over 65% of India's electricity and describes the various power plants operated by WBPDCL, including their total installed capacities. It then provides details on the main equipment used, including the coal handling plant, boiler, turbine, cooling tower, ash handling plant, and electrical components like the PLCC, PLC, transformers, switchyard, and grid.
What's hot (20)
Ups battery monitoring system over gsm by humayun kobir
Ups battery monitoring system over gsm by humayun kobir
A solar fed BLDC motor drive for mixer grinder using a buck converter
A solar fed BLDC motor drive for mixer grinder using a buck converter
IEEE Electrical Engineering projects for Bangalore Students for Academic year...
IEEE Electrical Engineering projects for Bangalore Students for Academic year...
DETECTING POWER GRID SYNCHRONISATION FAILURE ON SENSING BAD VOLTAGE OR FREQUE...
DETECTING POWER GRID SYNCHRONISATION FAILURE ON SENSING BAD VOLTAGE OR FREQUE...
Power grid synchronization failure detection and recovery
Power grid synchronization failure detection and recovery
Efficient Energy Harvesting and Transmission using Wireless Sensor Networks
Efficient Energy Harvesting and Transmission using Wireless Sensor Networks
Similar to Fly Smarter - Intelligent Power System & Starter Generators from ePropelled
PC 3-fāžu UPS izvēles iespējas ražošanas uzņēmumu vajadzībām
This document discusses 3-phase uninterruptible power supply (UPS) options for manufacturing companies. It begins by explaining that over 50% of critical load failures are due to issues with the electrical supply, so UPS systems are vital to protect sensitive digital technologies from power problems. The document then provides an overview of different UPS product lines that are designed for applications ranging from small to extra-large loads. It focuses on Schneider Electric's Galaxy VM UPS system, describing its modular design, efficiency modes, display interface, testing capabilities, and flexibility for meeting various customer needs.
Nf ac power_supply_e_kp3000_s_gs_denkei
This catalog describes programmable AC/DC power sources models KP3000S and KP3000GS. The KP3000S is a basic single phase model, while the KP3000GS includes additional standard features like sequence and simulation functions. Both models provide 3 kVA AC and 3 kW DC output capacity. They offer stable output for various loads and testing applications. Interface options allow integration into automated test systems.
Eaton 93PM 30-50kW UPS.pptx
The document describes the Eaton 93PM 30-50kW UPS. It highlights the UPS's industry-leading energy efficiency of over 99%, compact 0.5m2 footprint, and ease of deployment and management. The UPS provides reliable power protection and high availability for IT infrastructure with low total cost of ownership through its efficient design and operation.
Ecopowersupplies: Riello sentinel-pro-ups-datasheet
The Sentinel Pro UPS provides reliable power protection for servers and IT equipment through its online double conversion technology (VFI). It offers flexible operating modes, battery optimization features, expandable runtime, and low noise level under 40 dBA. Communication and management options include USB, serial, and software. Models range from 700VA to 3000VA.
InPhase Power Complete Product Catalogue
This document discusses IPC150-SCOM, an IGBT-based dynamic compensation system that offers harmonic filtering, unbalanced load management, and reactive power compensation. It can manage both capacitive and inductive loads without external components. The system is compact and provides dynamic compensation. It is suitable for a wide range of industrial applications and industries dealing with harmonic, unbalanced, or single/three-phase loads. Technical specifications are provided for various models with different voltage ratings and reactive power capacities.
One Solution for Simulation of Steam Turbine Power Upon 210MW
This is a presentation of research in the field of automation of steam turbines power upon 200MW of the group of Process Automation at Institute Mihajlo Pupin, Belgrade. In short, this is a model of steam turbine, which is used during the development of control algorithms steam turbine, power plant personnel training and optimization of steam turbine operation. The model has been adapted to work in real time and is applied in the form of hardware in the loop (HIL) simulation.
Power vamp aps
The APS range of portable GPUs was designed to provide avionics power and maintenance capabilities in a compact, hand-portable unit. The APS 1500/40 model is a single unit with a 40 amp integral power supply that can start small to medium aircraft. The APS 3000/40 model connects two APS 1500/40 units in parallel to provide up to 40 continuous amps and increased starting power for large engines. The APS 3000/80 connects two units in parallel to supply up to 80 continuous amps, suitable for powering large helicopters or medium aircraft. All models operate from standard AC power sources and include safety features, monitoring displays, and modular construction for maintenance.
uPSSP-1009
The document describes Gamatronic's mPS-SP series of double conversion online UPS systems. The mPS-SP is an improved version of the mPS model with additional software and hardware features. Key features include true double conversion online topology, microprocessor control, a variety of options, isolation transformer, and extended battery runtime. The UPS units can operate in standalone or parallel configurations for redundancy.
uPSSP-1009
The document describes Gamatronic's mPS-SP series of double conversion online UPS systems. The mPS-SP is an improved version of the mPS model with additional software and hardware features. It offers universal software, improved service procedures, and extended event logging. The mPS-SP can be configured in standalone or parallel modes to provide redundancy. It features true double conversion topology, precise voltage regulation, microprocessor control, and optional accessories.
An Overview Of Agbami Fpso Electrical Power System
The document provides an overview of the electrical power system protection on the AGBAMI FPSO. It describes the main, essential, and emergency power systems on board including generator capacity and configuration. It also discusses the various studies conducted on the power system model to determine protection requirements, including load flow analysis, short circuit study, and protective device coordination study. The document outlines the zoning of protection on the power system and the types of protection relays used. It provides examples of protection functions for generators, transformers, switchgear, feeders, and motors.
Automotive days 2014 ts-54 xx-v1.1 (Full Version)
This document describes an automotive functional testing seminar taking place in Mexico from May 19-23, 2014. It then provides details on Keysight Technologies' TS-54XX functional test platform, including various switch load unit and load card options. This scalable platform is suitable for testing applications with high current and voltage requirements, such as automotive functional testing. The document discusses the platform's modular design, integrated measurement and switching capabilities, and support for automation software.
M501 d datasheet_rev1.0_20050930
The document discusses a Standard Control Unit (SCU) that provides remote monitoring, configuration, status information, and control of a DC power plant's voltage, current, and alarm levels. The SCU can be upgraded to an Advanced Control Unit (ACU) through a simple swap, allowing for more extensive monitoring and control of auxiliary equipment on site. Benefits of the SCU/ACU include minimized installation time, high quality failure information, true hot plug installation, quick failure analysis, and extended battery life through advanced battery management.
Ultisolar iT3415 iT4415 iT6415 iTracer User Manual
Ultisolar iT3415 iT4415 iT6415 iTracer User Manual
Available at http://shop.ultisolar.com
-Ultisolar New Energy Co., Ltd
SWH Controllers||SWH Pump Stations||MPPT/PWM Solar Controllers||Flow Meter||Hall Flow Sensors||Heat Exchangers
Bộ lưu điện ups gtec chính hãng Italia
Bộ lưu điện ups gtec chính hãng Italia được cung cấp và phân phối độc quyền tại Việt Nam bởi Công ty TNHH Kỹ Thuật VBS. Hiện nay Bộ lưu điện ups đang chiếm lĩnh thị trường nguồn điện dự phòng tại việt nam trong thời kỳ công nghệ 4.0.
https://ups-gtec.com/
Catalog Biến tần Frenic 5000g11 Fuji Electric
Catalog Biến tần Frenic 5000g11 Fuji Electric
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
Wago epsitron power_supplies_catalog
This document describes the EPSITRON line of advanced power supplies sold and serviced by ELECTROMATE. It provides details on the PRO, COMPACT, CLASSIC, ECO, and UPS power supply series, which offer single or three-phase power with output voltages of 12V, 24V, 30.5V and 48V and currents ranging from 1A to 40A. It also describes accessories like redundancy modules, circuit breakers, and capacitive buffer modules that can be used with the power supplies.
Riello vdc-xeb-flywheel-enery-storage-systems
The XEB Hybrid Energy Storage system combines a flywheel energy storage system with batteries to provide backup power during outages. During short power disruptions, the flywheel provides enough energy to ride through the event without using the batteries. For longer outages, the system intelligently uses the batteries to provide continuous power to critical loads. The system monitors parameters of the flywheel and batteries to provide status updates. It is available in configurations that can provide backup power from 80kW to 450kW for minimum runtimes of 1.8 to 5 seconds.
Riello vdc-xeb-flywheel-enery-storage-systems
The XEB is a hybrid energy storage system that combines a flywheel UPS with batteries to provide backup power during outages. It addresses needs for added power and redundancy. During short outages, the flywheel provides power, reducing strain on batteries. For longer outages, batteries engage to maintain continuous power to critical loads. The system monitors both components' status. It is offered in various sizes to support different load capacities and runtime needs.
Etracer6415BND Etracer4415BND user manual by Ultisolar New Energy
Etracer6415BND Etracer4415BND user manual by Ultisolar New Energy Shandong iSentrol Electronic Technology Co., Ltd
Etracer6415BND Etracer4415bnd user manual by Ultisolar New Energy
6210984510002687504
Available at http://shop.ultisolar.com Paypal, Amazing Shipping freight to 100 countries and more. -Ultisolar New Energy Co., Ltd SWH Controllers||SWH Pump Stations||MPPT/PWM Solar Controllers||Flow Meter||Hall Flow Sensors||Heat ExchangersEcopowersupplies: Riello Sentinel Dual High Power UPS
Sentinel Dual is the best solution for powering mission critical applications and electro-medical devices requiring maximum power reliability.Sentinel Dual can be installed on the floor or in rack cabinets for networking applications.
Similar to Fly Smarter - Intelligent Power System & Starter Generators from ePropelled (20)
PC 3-fāžu UPS izvēles iespējas ražošanas uzņēmumu vajadzībām
PC 3-fāžu UPS izvēles iespējas ražošanas uzņēmumu vajadzībām
Ecopowersupplies: Riello sentinel-pro-ups-datasheet
Ecopowersupplies: Riello sentinel-pro-ups-datasheet
One Solution for Simulation of Steam Turbine Power Upon 210MW
One Solution for Simulation of Steam Turbine Power Upon 210MW
An Overview Of Agbami Fpso Electrical Power System
An Overview Of Agbami Fpso Electrical Power System
Ultisolar iT3415 iT4415 iT6415 iTracer User Manual
Ultisolar iT3415 iT4415 iT6415 iTracer User Manual
Etracer6415BND Etracer4415BND user manual by Ultisolar New Energy
Etracer6415BND Etracer4415BND user manual by Ultisolar New Energy
Ecopowersupplies: Riello Sentinel Dual High Power UPS
Ecopowersupplies: Riello Sentinel Dual High Power UPS
Recently uploaded
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
ここ3000字までしか入らないけどタイトルの方がたくさん文字入ると思います。
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Columbus Data & Analytics Wednesdays - June 2024
Columbus Data & Analytics Wednesdays, June 2024 with Maria Copot 20
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Infrastructure Challenges in Scaling RAG with Custom AI models
Building Retrieval-Augmented Generation (RAG) systems with open-source and custom AI models is a complex task. This talk explores the challenges in productionizing RAG systems, including retrieval performance, response synthesis, and evaluation. We’ll discuss how to leverage open-source models like text embeddings, language models, and custom fine-tuned models to enhance RAG performance. Additionally, we’ll cover how BentoML can help orchestrate and scale these AI components efficiently, ensuring seamless deployment and management of RAG systems in the cloud.
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
Things to Consider When Choosing a Website Developer for your Website | FODUU
Choosing the right website developer is crucial for your business. This article covers essential factors to consider, including experience, portfolio, technical skills, communication, pricing, reputation & reviews, cost and budget considerations and post-launch support. Make an informed decision to ensure your website meets your business goals.
Recently uploaded (20)
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
Infrastructure Challenges in Scaling RAG with Custom AI models
Infrastructure Challenges in Scaling RAG with Custom AI models
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
Things to Consider When Choosing a Website Developer for your Website | FODUU
Things to Consider When Choosing a Website Developer for your Website | FODUU
Fly Smarter - Intelligent Power System & Starter Generators from ePropelled
- 1. ePropelled The Future of Electric Propulsion Intelligent Power System - iPS3000 Aircraft electronics continue to evolve as mission profiles become more challenging and demanding. Longer flights and heavier payloads are driving system designers to new heights. New levels of both energy and system-level efficiencies are required to meet tomorrow’s aviation needs. The 3000-Watt ePropelled Intelligent Power Systems are a complete power management solution for your aircraft. They provide steady regulated DC power for your on-board avionics, servo and payload requirements. These smart power systems also provide a wide array of real-time performance and operational data for a range of useful applications and analytics. ePropelled’s iPS3000 provides complete power solution for aviation applications. The iPS3000 takes in 3-phase sinusoidal AC voltages from starter generators like the ePropelled SG3000 and converts them to a DC voltage to power on-board avionics, servos and payloads. Input AC voltages will vary with the speed of the Starter Generator or Alternator and, using active rectification and switching regulation, the iPS3000 will supply the required steady DC output voltage. Telemetry data for use with analytics, machine learning and artificial intelligence has become a critical component to operational success of any air mission. The iPS3000 monitors output voltage and current level and provides the data collected via an integrated Controller Area Network (CAN) interface. Aircraft and power system designers can create custom applications via the open API (Application Programming Interface) and can set thresholds for alerts and alarms based on your specific applications and mission profiles. There is an optional Electronic Engine Starter (EES) unit that can be used to drive the starter generator during the engine start sequence. Once the engine is up to speed, the PMU delivers the regulated voltage. If for any reason the starter generator stops working, a backup battery (optional) automatically comes online and provides the regulated voltage for a limited time depending on the backup battery capacity. Fly Smarter Intelligent Power Systems
- 2. ePropelled The Future of Electric Propulsion • High efficiency of up to 95% (load dependent). • Over-current limiting through voltage foldback. • Protection and recovery of DC voltage under extreme load transients. • Sophisticated CAN interface that provides: Datalogging, Real Time Monitoring, User Programmable Alerts, and Control. • Conductor Compensation: up to 10% (2.8 V) on 28 V version and 5% (2.4 V) on 48 V version • Software and hardware alerts to system controller. • Visual status indication for DC output provided through RGB LED. • Accepts an On-Shore Battery input capable of powering 100% of max 3kW load. • On-board Real-Time Clock used to time stamp Data Log entries. • PMU system temperature is monitored and logged. iPS3000 Main Features • Conductor Compensation Voltage Boost • Alert and Threshold Settings • RTDM Settings • Datalogging Settings • CAN Bus Settings User Configurable Parameters • Synchronous Rectifier FETs • DC Converter FETs • Output OR-ing FETs • Starter Generator via Thermocouple Temperatures Monitored and Logged 2.070in 52.6mm 5.860in 148.8mm 11.545in 293.2mm 3.090in 78.5mm 5.450in 138.4mm 11.125in 282.6mm 3.090in 78.5mm .177in 4.5mm TYPICAL CLEARANCE HOLE FOR #8-32 MOUNTING HARDWARE 3 Phase In U/V/W Amphenol SurLok Plus SLPRABPNO DC Out + Amphenol SurLok Plus SLPIRBBPNR1 DC Out - Amphenol SurLok Plus SLPIRBBPNB1 Shore Battery + Amphenol SurLok Plus SLPIRBBPNR2 Shore Battery - Amphenol SurLok Plus SLPIRBBPNR2 11.125in 282.6mm 5.450in 138.4mm Assembled in USA
- 3. iPS3000 Technical Specifications iPS3000 Specifications INPUT Parameter Min Max Notes Input Voltage Range 25V 100V Volts RMS Maximum Total Input Power 3150W at 50°C Ambient [122°F] OUTPUT Parameter Min Max Notes Maximum Total Output Power (Continuous) 3000W DC at 50°C Ambient [122°F] Primary Output Voltage 28V / 48V DC (108A, 62.5A) Factory Set Voltage Regulation ±500mV Both 28V / 48V versions Voltage Ripple P-P <500mV Both 28V / 48V versions Peak Efficiency ≥95% Load dependent Protection Features Input under-voltage warning. Output over-voltage warning. Output short-circuit protection. Output over-current protection. Over temperature warning. MECHANICAL Parameter Notes Dimensions 10.6” x 6” x 2.1” [270 mm x 152.4 mm x 52.6 mm] Weight 4.37 pounds [1985 grams] Cooling Air cooled Ambient Operating Temperature -32°C to 50°C at 3000W [-26°F to 122°F] Storage Temperature -40°C to 85°C [-40°F to 185°F] Ingress Protection IP20 CAN Bus 2.0 SOFTWARE Parameter Notes Software Modules Power up diagnostics, discovery and status reporting. System configuration - limits, alerts, EES Parameters etc. Real time alerts - voltage, currents, temperature, etc. Real time monitoring of all conditions in platform. Real time data logging. Software API. • Aircraft Power Systems • Unmanned Vehicle power systems • Power conditioning in ground, maritime and aerospace applications • Stand-alone power systems (SAPS) for remote area power supply • Voltage regulation in renewable power generation systems Recommended Applications Warnings and Labels ePropelled info@ePropelled.com www.ePropelled.com © 2020 by ePropelled All specifications subject to change without notice. For more information, including ordering product, please contact us at info@ePropelled.com. iPS3000-1 rev062420