This document discusses IPC150-SCOM, an IGBT-based dynamic compensation system that offers harmonic filtering, unbalanced load management, and reactive power compensation. It can manage both capacitive and inductive loads without external components. The system is compact and provides dynamic compensation. It is suitable for a wide range of industrial applications and industries dealing with harmonic, unbalanced, or single/three-phase loads. Technical specifications are provided for various models with different voltage ratings and reactive power capacities.
Non-linear loads have increased across industries and buildings, introducing harmful harmonics into power networks. IPC150-AHF active harmonic filters provide an economical solution by injecting equal and opposite harmonic currents to obtain clean sine waves from the supply. The filters compensate for harmonics, reactive power, and unbalanced currents. They are modular, easy to install, and do not get overloaded like passive filters. The document provides technical specifications, applications, and advantages of the IPC150-AHF active harmonic filter series.
The document discusses the costs of power quality issues to businesses and outlines common causes and solutions. It states that power quality problems cost the US economy $120-180 billion annually and outlines specific costs of downtime for different industries. Approximately 30% of power problems come from outside a facility from environmental or grid issues, while 70% are from inside factors like aging equipment or improper wiring. Common power quality events that can damage equipment include sags, swells, interruptions, harmonics, imbalances, and fluctuations. The document presents solutions like UPS systems, voltage regulators, filters, and surge protection that can mitigate these issues and protect sensitive equipment.
The document provides an overview of various power protection and conditioning products from Controlled Power Company, including Ultra-K isolation transformers, Power Purifiers, Power Processors, UPS systems, and emergency lighting inverters. Key features highlighted are voltage regulation, harmonic handling, noise reduction, small size, and optional communications capabilities. Product applications mentioned include industrial controls, computing, medical, and life safety systems.
The document introduces TDK-Lambda's KM series of medical power supplies. It discusses the reliability, safety, and EMC compliance requirements for medical power supplies. It then provides an overview of the key features of the KM series, including encapsulated design, through-hole mounting, wide temperature rating, medical certifications, isolation, and small size. The document also covers target markets and applications as well as part numbering for the KM series.
Electrical Engineering Basics - What Design Engineers Need to Knowmilestoneseng
The document discusses key elements that a project engineer needs to know when designing an electrical system, including the load, power source, protection, monitoring and control. It outlines factors to consider such as load ratings and locations, voltage regulations, protective device settings, and system documentation. Design development involves determining the total load, developing single line diagrams, evaluating the existing system, and implementing recommendations while ensuring safety codes and standards are followed.
The document provides information on the Delta Active Power Filter APF2000 Series. It can compensate for harmonics, reactive power, and unbalanced loads in real-time to improve power quality. Key features include compensating up to the 50th harmonic order, responding within 300 microseconds, modular design for easy maintenance, and an interface with a 7-inch color touchscreen for monitoring and control. It is suited for applications in industries such as manufacturing, transportation, and data centers.
The Analog Servo Drive 10A8DD is a PWM servo amplifier designed to drive brush DC motors with up to 10A of peak current and 6A of continuous current. It has protection against overvoltage, overcurrent, overheating and short circuits. It requires a single unregulated 20-80VDC power supply and interfaces with digital controllers using a PWM input signal.
TPC ENERJI provides complete power solutions and engineering services globally. This includes uninterrupted power supply systems up to 6 MVA, solar power solutions up to 10 MW, medium and low voltage equipment, electrical installation works, and maintenance services. It has experience with projects in various industries and locations worldwide. TPC ENERJI operates offices in Istanbul, Turkey and Lagos, Nigeria to serve customers locally and internationally.
Non-linear loads have increased across industries and buildings, introducing harmful harmonics into power networks. IPC150-AHF active harmonic filters provide an economical solution by injecting equal and opposite harmonic currents to obtain clean sine waves from the supply. The filters compensate for harmonics, reactive power, and unbalanced currents. They are modular, easy to install, and do not get overloaded like passive filters. The document provides technical specifications, applications, and advantages of the IPC150-AHF active harmonic filter series.
The document discusses the costs of power quality issues to businesses and outlines common causes and solutions. It states that power quality problems cost the US economy $120-180 billion annually and outlines specific costs of downtime for different industries. Approximately 30% of power problems come from outside a facility from environmental or grid issues, while 70% are from inside factors like aging equipment or improper wiring. Common power quality events that can damage equipment include sags, swells, interruptions, harmonics, imbalances, and fluctuations. The document presents solutions like UPS systems, voltage regulators, filters, and surge protection that can mitigate these issues and protect sensitive equipment.
The document provides an overview of various power protection and conditioning products from Controlled Power Company, including Ultra-K isolation transformers, Power Purifiers, Power Processors, UPS systems, and emergency lighting inverters. Key features highlighted are voltage regulation, harmonic handling, noise reduction, small size, and optional communications capabilities. Product applications mentioned include industrial controls, computing, medical, and life safety systems.
The document introduces TDK-Lambda's KM series of medical power supplies. It discusses the reliability, safety, and EMC compliance requirements for medical power supplies. It then provides an overview of the key features of the KM series, including encapsulated design, through-hole mounting, wide temperature rating, medical certifications, isolation, and small size. The document also covers target markets and applications as well as part numbering for the KM series.
Electrical Engineering Basics - What Design Engineers Need to Knowmilestoneseng
The document discusses key elements that a project engineer needs to know when designing an electrical system, including the load, power source, protection, monitoring and control. It outlines factors to consider such as load ratings and locations, voltage regulations, protective device settings, and system documentation. Design development involves determining the total load, developing single line diagrams, evaluating the existing system, and implementing recommendations while ensuring safety codes and standards are followed.
The document provides information on the Delta Active Power Filter APF2000 Series. It can compensate for harmonics, reactive power, and unbalanced loads in real-time to improve power quality. Key features include compensating up to the 50th harmonic order, responding within 300 microseconds, modular design for easy maintenance, and an interface with a 7-inch color touchscreen for monitoring and control. It is suited for applications in industries such as manufacturing, transportation, and data centers.
The Analog Servo Drive 10A8DD is a PWM servo amplifier designed to drive brush DC motors with up to 10A of peak current and 6A of continuous current. It has protection against overvoltage, overcurrent, overheating and short circuits. It requires a single unregulated 20-80VDC power supply and interfaces with digital controllers using a PWM input signal.
TPC ENERJI provides complete power solutions and engineering services globally. This includes uninterrupted power supply systems up to 6 MVA, solar power solutions up to 10 MW, medium and low voltage equipment, electrical installation works, and maintenance services. It has experience with projects in various industries and locations worldwide. TPC ENERJI operates offices in Istanbul, Turkey and Lagos, Nigeria to serve customers locally and internationally.
Ls catalog thiet bi tu dong i p5a_e_1105_dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
Artificial lift forum ul 1741 presentation - finalRon Henderson
The document discusses UL 1741, a standard for distributed generation systems. It notes that UL 1741 certified systems allow recovery of up to 40% of energy used in beam pumps through regenerative drives. The standard ensures inverters meet requirements for interconnection, safety, output quality and anti-islanding. An Enersaver Power system is highlighted as the first and only drive system compliant with UL 1741, allowing benefits like electricity cost savings, clean power generation, and participation in demand response programs.
This document discusses the benefits of the TSi Precision Power Conditioner over other power conditioning solutions like servo motor-based automatic voltage regulators (AVRs) and uninterruptible power supplies (UPS). It notes that industrial equipment is susceptible to failures from poor power quality issues like voltage fluctuations, sags, surges, and spikes. The TSi Precision Power Conditioner provides instantaneous voltage correction within 20 milliseconds to maintain a stable output, preventing equipment damage and downtime. It has advantages over servo AVRs like faster response time and solid state design with no noise, and over UPS systems with higher efficiency and smaller size.
The document lists 97 electrical projects for engineering students on the website http://www.edgefxkits.com. The projects cover a wide range of topics and involve using components like Arduino, PIC microcontrollers, sensors and more. They include projects involving solar energy systems, motor speed control, wireless power transfer, home automation and electrical load management. The conclusion states that students can gain theoretical and practical knowledge from these projects by choosing ones that interest them.
fault detection of transformer using GSM,,,,by YASASWINI.KAGITHALAMAHESH294
This document describes a project to design a fault recognition protection system for AC transmission lines using GSM technology. The system monitors the output of a step-down transformer using a microcontroller and fault indicator circuit. If a fault is detected, a relay is activated and a message is sent via GSM modem to notify the user. The system is powered by a regulated 5V supply and includes components like a LCD to display the power line status, buzzer to sound on fault, and MAX232 for serial communication between the microcontroller and GSM modem. The aim is to remotely monitor transformer faults without needing to check relays on site.
This document provides an overview of the key components and functions of an electrical substation. It discusses how transformers are used to increase or decrease voltages, how current transformers and capacitor voltage transformers are used for measurements. It also describes circuit breakers, disconnect switches, surge arresters, protective relays, wave traps, battery backups, control rooms and the protection systems used to quickly detect faults.
The BD15A8 is a PWM servo drive designed to drive brushless DC motors with a peak current of 15A and continuous current of 7.5A. It interfaces with digital controllers using PWM and direction signals and supports hall sensor feedback. It is fully protected against overloads and faults.
IRJET- Phase Changer Mechanism in Abnormal Conditions for Single Phase Applic...IRJET Journal
This document describes an automatic phase changer mechanism that can operate electrical equipment even if only one phase of a three-phase power supply is available. It uses a microcontroller to continuously monitor the three phases and connect a load to the phase with the highest voltage using relays. When more than one phase is live, it prioritizes Phase 1. It displays the phase status on an LCD. The mechanism was designed to address power instability issues and allow continuous operation of equipment during phase outages or imbalances across phases. It can automatically switch the load to a different live phase if the current phase power goes out.
Smart – Optimizer ECOD implements 7 functions in a single units
Optimization of energy consumption
Power factor correction
Harmonic filtering
Balancing phases
Limit the maximum inrush current
Solving problems with short-term voltage drops
Lightning protection
The BD25A20I analog servo drive can provide up to 25A of peak current and 12.5A of continuous current from a 40-190VDC power supply. It is designed to drive brushless DC motors and interfaces with digital controllers using PWM and direction signals. It has protections against overvoltage, overcurrent, overheating and short circuits.
The document describes an intelligent motor control center (MCC) system using SIMOCODE motor management and control devices. Conventional MCCs use discrete hardware components for protection, measurement, and I/O, whereas the intelligent MCC uses SIMOCODE pro controllers with integrated Profibus communication. This allows for online monitoring of motor parameters, centralized fault records, and control from a DCS without additional I/O wiring. The document outlines the components, functions, configuration, benefits and issues addressed during commissioning of the intelligent MCC system.
IRJET - An Automatic Phase Selector from Any Available Three Phase Supply...IRJET Journal
This document describes the design and implementation of an automatic phase selector system that can select a single active phase from a three-phase power supply. The system uses relays and a gear motor to automatically switch the connection to a single-phase load to a different phase within seconds if the currently connected phase fails. This provides uninterrupted power to critical single-phase loads like prepaid meters. The system was tested and worked satisfactorily by quickly switching the load connection to an alternate active phase when the initial phase failed. This automatic switching eliminates downtime and reduces stress on staff compared to manual switching of phases during an outage.
We are now realize Clean Air (Oxygen) is very important for each breath to ensure life of earth.
Like Other Industries releasing Pollution and Carbon due to production but for Transportation may be we can stop these Pollution by using Electric Vehicle on Road.
But the same time we have to understand and ready to build infra for Additional Power in Demand for Charging of these Vehicles.
It will be only possible when we develop power in Local Integrate with Battery Energy Storage and Supply Clean Power and Untrip Power to full demand of Power for Vehicle Charging Infra.
Industry has to select Connector both side from Vehicle and Vehicle Charging should be same .
Link Vue System is professional Company Supporting Technical and Product Demand as trade or Installation Partner .
We invite to join us for Nation Agenda to reduce Carbon in Air and Increase of Oxygen in AIR.
We Offer Electrical Safety Earthing&Surge Protection ,Cable and Connectors (up to400Amps IP 68 )for Electric Vehicle , Networking Lan ,Fiber and Wireless,Automation &Connectivity of Building Commination connectivity up to distribution Substation .
We Request to Electric Vehicle&Battery Manufacturer, Vehicle Charging OEM, Installation Partner , Power Plant Solar Roof Top ,High Energy Batter Storage to Contact us
The Adaptive Power Regulator is a device that enables efficient management of available power to industries to reduce electricity costs. It monitors power consumption and automatically sheds lower priority loads to avoid exceeding the maximum KVA limit, avoiding penalties from the Electricity Board. The PIC microcontroller forms the core, interfacing components like the current transformer, relays, and LCD display to prioritize loads and shed them based on readings. It aims to perform priority-based load shedding effectively while minimizing losses to industries.
Internship Training Project Report "PowerGrid"Raushan11
The document summarizes a training report for two students, Ankit Yadav and Raushan Kumar, who completed a two-week training program at the Power Grid Corporation of India Ltd. It provides an overview of the technologies covered in their training including optical fibers, PDH, SDH, WDM, MPLS, OPGW, ADSS, and components of a switchyard like circuit breakers, isolators, and reactors. The training focused on Power Grid's telecommunication network and its use of OPGW technology for high-speed data transmission along power lines.
An Overview Of Agbami Fpso Electrical Power Systemvkmalik
The document provides an overview of the electrical power system protection on the AGBAMI FPSO. It describes the main, essential, and emergency power systems on board including generator capacity and configuration. It also discusses the various studies conducted on the power system model to determine protection requirements, including load flow analysis, short circuit study, and protective device coordination study. The document outlines the zoning of protection on the power system and the types of protection relays used. It provides examples of protection functions for generators, transformers, switchgear, feeders, and motors.
A company specialized in uninterruptible power supply systems developed and manufactured in 2006 a system comprising a 400kVA UPS unit.
The system was installed in a production facility manufacturing food packaging equipment and foil, located in northern Poland.
Frequent voltage dips and fluctuations were severely impairing the production process, causing downtimes of several-hour duration, which generated substantial losses. Restarting the production caused another losses resulting from the process specifi city.
Typically about 200 kg of material was lost until final product was compliant with standards.
Discover how the design engineers managed to find a solution for this process production line !
UPS systems provide backup power to connected electrical loads when main power fails. There are three main types of UPS systems - offline UPS, online UPS, and line-interactive UPS. Offline UPS converts battery power to AC during outages with a 25ms transfer time, while online UPS has zero transfer time by continuously powering loads from batteries. Line-interactive UPS is similar to offline but adds a tap-changing transformer for voltage regulation and lower transients. UPS systems are commonly used in data centers, industries, telecommunications, hospitals, banks, and other critical applications.
The BD25A20 analog servo drive is designed to drive brushless DC motors with a peak current of 25A and continuous current of 12.5A. It has full protection against overloads and short circuits. The drive interfaces with digital controllers using PWM and direction inputs and provides hall commutation and current monitoring outputs. It is compliant with various safety and EMC standards.
Manufacturers of Load Cell Amplifiers in India - Canopus Instrumentssmita_kale
The document describes a load cell amplifier that interfaces with strain gauge load cells. It provides a stable 10V reference voltage to excite the load cell and amplifies the millivolt output signal. The amplifier offers isolated 0-10V or 4-20mA output proportional to the load cell signal and features like TARE adjustment, low noise and drift, 50msec response time, DIN rail mounting, and 24VDC power supply. The amplifier is suitable for weighing, batching, tension monitoring, and speed feedback applications in industries.
Axpert i-sine - Multi Function Active Harmonic Filteractiveharmonics
AXPERT-i-sine is designed with the intelligent control algorithm which dynamically changes the switching frequency to optimize the performance & efficiency. The performance of AXPERT-i-sine is less affected by supply voltage harmonic distortion. AXPERT-i-sine provides selective harmonic attenuation up to 51st order.
The document discusses a high-end multi-functional electronic load called the Load Station Series (300W/1000W). It has several key features:
1) It can precisely set current waveforms on a color LCD and has dynamic, sequence, and sweep modes for testing.
2) It has a high-speed current control technology that eliminates overshoot and delivers a smooth current transition.
3) Unlike conventional loads, it acts as a resistive load from 0V so there is no delay between current and voltage, allowing it to test low-voltage devices.
4) It has options like a ripple and noise measurement module, can be remotely controlled, and its units can be connected in
Ls catalog thiet bi tu dong i p5a_e_1105_dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
Artificial lift forum ul 1741 presentation - finalRon Henderson
The document discusses UL 1741, a standard for distributed generation systems. It notes that UL 1741 certified systems allow recovery of up to 40% of energy used in beam pumps through regenerative drives. The standard ensures inverters meet requirements for interconnection, safety, output quality and anti-islanding. An Enersaver Power system is highlighted as the first and only drive system compliant with UL 1741, allowing benefits like electricity cost savings, clean power generation, and participation in demand response programs.
This document discusses the benefits of the TSi Precision Power Conditioner over other power conditioning solutions like servo motor-based automatic voltage regulators (AVRs) and uninterruptible power supplies (UPS). It notes that industrial equipment is susceptible to failures from poor power quality issues like voltage fluctuations, sags, surges, and spikes. The TSi Precision Power Conditioner provides instantaneous voltage correction within 20 milliseconds to maintain a stable output, preventing equipment damage and downtime. It has advantages over servo AVRs like faster response time and solid state design with no noise, and over UPS systems with higher efficiency and smaller size.
The document lists 97 electrical projects for engineering students on the website http://www.edgefxkits.com. The projects cover a wide range of topics and involve using components like Arduino, PIC microcontrollers, sensors and more. They include projects involving solar energy systems, motor speed control, wireless power transfer, home automation and electrical load management. The conclusion states that students can gain theoretical and practical knowledge from these projects by choosing ones that interest them.
fault detection of transformer using GSM,,,,by YASASWINI.KAGITHALAMAHESH294
This document describes a project to design a fault recognition protection system for AC transmission lines using GSM technology. The system monitors the output of a step-down transformer using a microcontroller and fault indicator circuit. If a fault is detected, a relay is activated and a message is sent via GSM modem to notify the user. The system is powered by a regulated 5V supply and includes components like a LCD to display the power line status, buzzer to sound on fault, and MAX232 for serial communication between the microcontroller and GSM modem. The aim is to remotely monitor transformer faults without needing to check relays on site.
This document provides an overview of the key components and functions of an electrical substation. It discusses how transformers are used to increase or decrease voltages, how current transformers and capacitor voltage transformers are used for measurements. It also describes circuit breakers, disconnect switches, surge arresters, protective relays, wave traps, battery backups, control rooms and the protection systems used to quickly detect faults.
The BD15A8 is a PWM servo drive designed to drive brushless DC motors with a peak current of 15A and continuous current of 7.5A. It interfaces with digital controllers using PWM and direction signals and supports hall sensor feedback. It is fully protected against overloads and faults.
IRJET- Phase Changer Mechanism in Abnormal Conditions for Single Phase Applic...IRJET Journal
This document describes an automatic phase changer mechanism that can operate electrical equipment even if only one phase of a three-phase power supply is available. It uses a microcontroller to continuously monitor the three phases and connect a load to the phase with the highest voltage using relays. When more than one phase is live, it prioritizes Phase 1. It displays the phase status on an LCD. The mechanism was designed to address power instability issues and allow continuous operation of equipment during phase outages or imbalances across phases. It can automatically switch the load to a different live phase if the current phase power goes out.
Smart – Optimizer ECOD implements 7 functions in a single units
Optimization of energy consumption
Power factor correction
Harmonic filtering
Balancing phases
Limit the maximum inrush current
Solving problems with short-term voltage drops
Lightning protection
The BD25A20I analog servo drive can provide up to 25A of peak current and 12.5A of continuous current from a 40-190VDC power supply. It is designed to drive brushless DC motors and interfaces with digital controllers using PWM and direction signals. It has protections against overvoltage, overcurrent, overheating and short circuits.
The document describes an intelligent motor control center (MCC) system using SIMOCODE motor management and control devices. Conventional MCCs use discrete hardware components for protection, measurement, and I/O, whereas the intelligent MCC uses SIMOCODE pro controllers with integrated Profibus communication. This allows for online monitoring of motor parameters, centralized fault records, and control from a DCS without additional I/O wiring. The document outlines the components, functions, configuration, benefits and issues addressed during commissioning of the intelligent MCC system.
IRJET - An Automatic Phase Selector from Any Available Three Phase Supply...IRJET Journal
This document describes the design and implementation of an automatic phase selector system that can select a single active phase from a three-phase power supply. The system uses relays and a gear motor to automatically switch the connection to a single-phase load to a different phase within seconds if the currently connected phase fails. This provides uninterrupted power to critical single-phase loads like prepaid meters. The system was tested and worked satisfactorily by quickly switching the load connection to an alternate active phase when the initial phase failed. This automatic switching eliminates downtime and reduces stress on staff compared to manual switching of phases during an outage.
We are now realize Clean Air (Oxygen) is very important for each breath to ensure life of earth.
Like Other Industries releasing Pollution and Carbon due to production but for Transportation may be we can stop these Pollution by using Electric Vehicle on Road.
But the same time we have to understand and ready to build infra for Additional Power in Demand for Charging of these Vehicles.
It will be only possible when we develop power in Local Integrate with Battery Energy Storage and Supply Clean Power and Untrip Power to full demand of Power for Vehicle Charging Infra.
Industry has to select Connector both side from Vehicle and Vehicle Charging should be same .
Link Vue System is professional Company Supporting Technical and Product Demand as trade or Installation Partner .
We invite to join us for Nation Agenda to reduce Carbon in Air and Increase of Oxygen in AIR.
We Offer Electrical Safety Earthing&Surge Protection ,Cable and Connectors (up to400Amps IP 68 )for Electric Vehicle , Networking Lan ,Fiber and Wireless,Automation &Connectivity of Building Commination connectivity up to distribution Substation .
We Request to Electric Vehicle&Battery Manufacturer, Vehicle Charging OEM, Installation Partner , Power Plant Solar Roof Top ,High Energy Batter Storage to Contact us
The Adaptive Power Regulator is a device that enables efficient management of available power to industries to reduce electricity costs. It monitors power consumption and automatically sheds lower priority loads to avoid exceeding the maximum KVA limit, avoiding penalties from the Electricity Board. The PIC microcontroller forms the core, interfacing components like the current transformer, relays, and LCD display to prioritize loads and shed them based on readings. It aims to perform priority-based load shedding effectively while minimizing losses to industries.
Internship Training Project Report "PowerGrid"Raushan11
The document summarizes a training report for two students, Ankit Yadav and Raushan Kumar, who completed a two-week training program at the Power Grid Corporation of India Ltd. It provides an overview of the technologies covered in their training including optical fibers, PDH, SDH, WDM, MPLS, OPGW, ADSS, and components of a switchyard like circuit breakers, isolators, and reactors. The training focused on Power Grid's telecommunication network and its use of OPGW technology for high-speed data transmission along power lines.
An Overview Of Agbami Fpso Electrical Power Systemvkmalik
The document provides an overview of the electrical power system protection on the AGBAMI FPSO. It describes the main, essential, and emergency power systems on board including generator capacity and configuration. It also discusses the various studies conducted on the power system model to determine protection requirements, including load flow analysis, short circuit study, and protective device coordination study. The document outlines the zoning of protection on the power system and the types of protection relays used. It provides examples of protection functions for generators, transformers, switchgear, feeders, and motors.
A company specialized in uninterruptible power supply systems developed and manufactured in 2006 a system comprising a 400kVA UPS unit.
The system was installed in a production facility manufacturing food packaging equipment and foil, located in northern Poland.
Frequent voltage dips and fluctuations were severely impairing the production process, causing downtimes of several-hour duration, which generated substantial losses. Restarting the production caused another losses resulting from the process specifi city.
Typically about 200 kg of material was lost until final product was compliant with standards.
Discover how the design engineers managed to find a solution for this process production line !
UPS systems provide backup power to connected electrical loads when main power fails. There are three main types of UPS systems - offline UPS, online UPS, and line-interactive UPS. Offline UPS converts battery power to AC during outages with a 25ms transfer time, while online UPS has zero transfer time by continuously powering loads from batteries. Line-interactive UPS is similar to offline but adds a tap-changing transformer for voltage regulation and lower transients. UPS systems are commonly used in data centers, industries, telecommunications, hospitals, banks, and other critical applications.
The BD25A20 analog servo drive is designed to drive brushless DC motors with a peak current of 25A and continuous current of 12.5A. It has full protection against overloads and short circuits. The drive interfaces with digital controllers using PWM and direction inputs and provides hall commutation and current monitoring outputs. It is compliant with various safety and EMC standards.
Manufacturers of Load Cell Amplifiers in India - Canopus Instrumentssmita_kale
The document describes a load cell amplifier that interfaces with strain gauge load cells. It provides a stable 10V reference voltage to excite the load cell and amplifies the millivolt output signal. The amplifier offers isolated 0-10V or 4-20mA output proportional to the load cell signal and features like TARE adjustment, low noise and drift, 50msec response time, DIN rail mounting, and 24VDC power supply. The amplifier is suitable for weighing, batching, tension monitoring, and speed feedback applications in industries.
Axpert i-sine - Multi Function Active Harmonic Filteractiveharmonics
AXPERT-i-sine is designed with the intelligent control algorithm which dynamically changes the switching frequency to optimize the performance & efficiency. The performance of AXPERT-i-sine is less affected by supply voltage harmonic distortion. AXPERT-i-sine provides selective harmonic attenuation up to 51st order.
The document discusses a high-end multi-functional electronic load called the Load Station Series (300W/1000W). It has several key features:
1) It can precisely set current waveforms on a color LCD and has dynamic, sequence, and sweep modes for testing.
2) It has a high-speed current control technology that eliminates overshoot and delivers a smooth current transition.
3) Unlike conventional loads, it acts as a resistive load from 0V so there is no delay between current and voltage, allowing it to test low-voltage devices.
4) It has options like a ripple and noise measurement module, can be remotely controlled, and its units can be connected in
This document summarizes the features of the KG Load Station Series 300W/1000W electronic loads. It has a revolutionary UI like an oscilloscope for easy operation. It realizes less 35% weight than previous models. It can operate just like a resistor with no minimum voltage requirement. It has high speed current control and 4 models from 300W to 1000W in 125V and 500V ranges.
The document discusses a high-end multi-functional electronic load called the Load Station Series (300W/1000W). It has several key features:
1) It can precisely set current waveforms on a color LCD and has a revolutionary oscilloscope-like user interface for ease of operation.
2) It has high-speed current control technology that eliminates overshoot and delivers an ideal current shape.
3) It offers flexible operation modes including constant current, constant resistance, constant power, constant voltage, external control, and sequence mode. Accessories like a ripple and noise measurement module are also available.
4) The lightweight and compact design incorporates a large LCD, memory functions, multi-
Catalog Biến tần Frenic 5000g11 Fuji Electric
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
The document summarizes Mitsubishi Electric's UPS systems, focusing on their technology and advantages over competitors. Key points include:
- Mitsubishi manufactures all major UPS components, including IGBT transistors, and has locations in the US.
- Their UPS systems have benefits like lower harmonics, optimized generator sizing, and maximized battery life without needing additional filters.
- Their 9900A series offers high efficiency, a small footprint, lightweight design, and reliability features like modular expandability and reactorless parallel operation.
Mitsubishi inverter freqrol-a701 seriesDien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi inverter freqrol-a701 seriesDien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi inverter freqrol-a701 series dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Ls catalog thiet bi tu dong imp intelligent motor_protectionrelay_e_0910Dien Ha The
Catalog LS, Catalog,
Catalog Thiết Bị Điện LS, Catalog Thiết Bị Điện,
Catalog Biến Tần LS, Catalog Biến Tần,
Catalog Inverter LS, Catalog Inveter,
http://dienhathe.com,
Chi tiết các sản phẩm khác của LS tại https://dienhathe.com
Xem thêm các Catalog khác của LS tại https://dienhathe.info
Để nhận báo giá sản phẩm LS vui lòng gọi: 0907.764.966
Ls catalog thiet bi tu dong imp intelligent motor_protectionrelay_e_0910_dien...Dien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
The Sentinel Pro UPS provides reliable power protection for servers and IT equipment through its online double conversion technology (VFI). It offers flexible operating modes, battery optimization features, expandable runtime, and low noise level under 40 dBA. Communication and management options include USB, serial, and software. Models range from 700VA to 3000VA.
Performance Technology Solutions provides power protection solutions including UPS systems. They offer line-interactive and online UPS models across various product lines - Xtreme Value Tower, Xtreme Value Rack Tower, and Xtreme Performance Rack Tower - to address different power problems. Their solutions aim to close the gap between pricing and features by providing more value and features than competitors for the cost. They also offer extended warranty plans and support services.
Fly Smarter - Intelligent Power System & Starter Generators from ePropelledLakshmi Narsimhan
IPS 3000 from ePropelled is a 3000 Watt Intelligent Power Systems are a complete power management solution for your aircraft. They provide steady regulated DC power for your on-board avionics, servo and payload requirements. These
smart power systems also provide a wide array of real-time performance and operational data for a range of useful applications and analytics.
Weg automation-drives-and-controls-usa804-brochure-englishDaniel García
This document provides information on automation products from WEG, including contactors and overload relays, timers and monitoring relays, pushbuttons and pilot lights, soft starters, variable frequency drives, motor protective circuit breakers, terminals, air circuit breakers, capacitors for power factor correction, and automation systems. WEG offers a comprehensive portfolio of low and medium voltage automation equipment for industrial applications.
Prima's Static Voltage Regulator is an IGBT-based PWM voltage regulator with tight regulation and fast correction speed of 4000 V/Sec. It has a compact size, silent operation with no moving parts, and is maintenance-free. It can be used for applications such as hospitals, hotels, commercial buildings, industries, and more. It regulates the voltage through IGBT switching without harmonic distortion and maintains a pure sine wave output.
Zhuhai Sinopak Electric Ltd produces motor drives and power quality equipment including medium and low voltage variable frequency drives, soft starters, static synchronous compensators, and active power filters. The company aims to improve production efficiency and energy savings for customers across Southeast Asia, Eastern Europe, the Middle East, and Africa.
Zhuhai Sinopak Electric Ltd produces motor drives and power quality equipment including medium and low voltage variable frequency drives, soft starters, static synchronous compensators, and active power filters. The company aims to improve production efficiency and energy savings for customers across Southeast Asia, Eastern Europe, the Middle East, and Africa.
Zhuhai Sinopak Electric Ltd produces motor drives and power quality equipment including medium and low voltage variable frequency drives, soft starters, static synchronous compensators, and active power filters. The company aims to improve production efficiency and energy savings for customers across Southeast Asia, Eastern Europe, the Middle East, and Africa.
Buy Off Grid Solar Inverter & MPPT Solar Inverter in India.pptxEnertech UPS
Discover the finest Off-grid solar inverters without battery and MPPT solar inverters equipped with power backup solutions at unbeatable prices in India. Embrace the solar revolution today with Enertech UPS, where cutting-edge technology meets affordability. Harness the power of the sun to fuel your energy needs efficiently and sustainably. Visit our website to explore our range of products and take a step towards a greener, more eco-friendly future.
URL: [https://enertechups.com/product/solar-off-grid-inverter]
Similar to InPhase Power Complete Product Catalogue (20)
Buy Off Grid Solar Inverter & MPPT Solar Inverter in India.pptx
InPhase Power Complete Product Catalogue
1. Better Power Better Nation
Industrial Power Quality and Conversion Systems
www.inphase.in
ISO 9001:2008 Certified
2. IPC150-SCOM a dynamic and versatile compensation system based on IGBT that offers additionally filtering of
harmonics , unbalance load management, voltage stability improvement along with reactive power
compensation. This ultra fast compact system can manage both capacitive and Inductive loads without the
need for any capacitor or reactor banks offering a dynamic compensation at a smaller foot print.
Applications
Harmonic and Unbalanced loads
Single phase and three phase
applications
LV networks
MV networks with step-up
transformer
Industrial load fed by weak networks
Industries
Steel Industry
Railway/Metro
Process Industries
Automobile
Oil and Gas
Wind Farms and Solar Farms
Lifts and Port cranes
Paper and Pulp
Mining
Textile Mills
Cement factories
Other heavy industries
Multi Function Ultra Fast Power Quality Compensation
Reactive Power Unbalance CompensationHarmonics
STATCOM
Customer benefits
‐ Total power quality compensation
‐ Dynamic reactive power
‐ Selectable Harmonics till 13th order
‐ Unbalanced load
‐ Easy to commission
‐ Reduction of maximum demand (kVA)
‐ Improving voltage profile
‐ Reduction of system losses
‐ Meeting the utility regulation and harmonic
compliances
‐ Great uses for dynamic loads in weak networks/
Typical installation industries include but not limited to,
IPC150-SCOM is suitable to be used in the
following cases
Series
IPC150
3. Technical Specifications - IPC150-SCOM
Model kvar Voltage Dimensions
(W X D X H ) in mm
Approx. Weight
(Kg)
Phase
IPC150-SCOM-150-V415 +/-150kvar 415 800 X 800 X 1800 5001p/3p
IPC150-SCOM-250-V415 +/-250kvar 415 800 X 800 X 1800 6501p/3p
IPC150-SCOM-300-V415 +/-300kvar 415 800 X 800 X 1800 7003p
IPC150-SCOM-500-V415 +/-500kvar 415 1800 X 1000 X 2000 10001p/3p
IPC150-SCOM-150-V690 +/-150kvar 690 1800 X 800 X 1800 5001p/3p
IPC150-SCOM-250-V690 +/-250kvar 690 800 X 800 X 1800 6501p/3p
IPC150-SCOM-300-V690 +/-300kvar 690 800 X 800 X 1800 7003p
IPC150-SCOM-500-V690 +/-500kvar 690 1800 X 1200 X 1800 10001p/3p
IPC150-SCOM-1000-V690 +/-1000kvar 690 1800 X 1200 X 2000 20003p
Model details
Electrical Characteristics
Connection method 3 Phase, 3 Wire System
Nominal Voltage 415V, 690V (3-Phase and Single Phase)
Network Voltage 380V - 690V (L-L)
Permissible Voltage Variation +/- 10% (For 690V equipment -10% to +5%)
System Frequency 50 Hz, 60Hz (+/- 5%)
Equipment Efficiency 97% of the equipment power typically
Compensation Modes Closed loop / Open Loop / Fixed mode / Voltage Control
Reaction time < 1ms (Instantaneous)
Response time Less than one power cycle
Load balancing modes Between Line to line (Negative Sequence compensation)
Harmonic compensation 3rd - 13th Harmonic with 4-selectable Harmonics**
Modularity Maximum 32 units can be combined
Internal Protection Main breaker
Programming Characteristics
Communications Mod bus (1)
Programming Interface Using IPC Manager (Touch screen Graphical User Interface - GUI)
Redundancy Master/master arrangement
Reactive Power range -100% inductive to +100% capacitive of the rated kvar
Auxiliary PF Setting Programmable as per the Site conditions
Target cos pi Programmable from 0.6 (inductive) to 0.6 (capacitive)
Harmonics Selection 3rd - 13th Harmonic with 4- selectable Harmonics**
Installation Aspects (Per Unit)
Ingress Protection (IP) IP-31
Altitude Up to 1000m (2)
Ambient Temperature 0˚C to (+) 40˚C(2)
Humidity Maximum 95% RH, Non-condensing
Cable Entry Bottom entry (For others please consult InPhase Engineers)
CT Requirements 3 CT‘s are required (class 1.0 or better) with sufficient VA Burden
High Speed
Touch Display
No load Auto
Shutdown
Advanced DSP
Processor
Modular
Configuration
High Efficiency
4. IPC150-AHF Series is an IGBT Based instantaneous voltage source converter. This IGBT Based system mitigates the
Harmonics by generating Anti-Harmonics into the system and thereby cancelling the Harmonics present in the system.
IPC150-AHF Series can not only compensate Harmonics but also for reactive power and unbalanced current loads
(Negative Sequence). This makes it a highly efficient Power Quality Equipment.
Industries
Multi Function Ultra Fast Power Quality Compensation
Unbalance Compensation
Active Harmonic Filter
Product Features
Typical installation industries include but not limited to,
Steel plants/Rolling mills
Cement Industries
Automotive Industries
Hotels/Resorts
Railways
Metro
Commercial/Residential Complex
IT/ITES Companies
Pulp and Paper Industries
Chilling Plants
Printing Industries
Textile Mills
Any other process Industries
Selective Harmonics Filtering
Closed loop control for best accuracy
Not Over loadable
Filters without generation of reactive power
Added function of reactive power compensation
Additional unbalanced compensation
Fast response time
Small foot print
Doesn’t require special CT’s
Programmable power factor
Suitable for G5/4 or IEEE-519 standards or utility regulator.
Series
IPC150
Harmonics Power factor correction
5. Technical Specifications - IPC150-AHF
Model details
Operating conditions
Rated operating voltage 200-690 V
Frequency 50 Hz/60Hz ± 5%
Connection System 3 phase (3 wire)*
Filter Characteristics
Selectable Harmonics Multiple harmonics individually selectable
Filtering efficiency Better than 97% of filter rating typically
Reaction time <0.5 ms instantaneous
Response time < 30 ms typically (10% - 90% filtering)
Reactive power compensation Static/Dynamic
Power Factor Programmable 0.6 Inductive to 0.6 capacitive
Load balancing Line to Line balancing (3-w mode)
Controller DSP based controller
Active Power <3% of unit rating
Modularity Up to 32 power units/filter. Power units can be master/slave
Ingress Production
+ IP31
Display Functions
Control capabilities Filter on/Off, Filter status description
Setup Selection of individual harmonic to filter
Settable Options Power Factor/Reactive Power/Unbalanced compensation/ CT
ratio/Parallel units
Electrical parameters monitoring Voltages and currents measurements. Active, reactive and apparent
power, Power factor measurements.
Environmental conditions
Temperature 0° — 40°C
Humidity Up to 95°(Condensing)
Altitude 1000M
Options
Common top / bottom cable entry cubicle
IP41 execution (filter derating of 10% has to be applied)
Base frame (100 mm height) for single unit
Surge arresters
*For 4 wire connection please consult
Model
Harmonic
phase current* Voltage
Dimensions
(W X D X H ) in mm Approx. Weight (Kg)
IPC150-AHF-150A-V415 150A 415 800 X 800 X 1800 520
IPC150-AHF-300A-V415 300A 415 800 X 800 X 1800 640
IPC150-AHF-450A-V415 450A 415 1200 X 1200 X 2150 780
IPC150-AHF-600A-V415 600A* 415 1800 X 1200 X 2000 2000
IPC150-AHF-900A-V415 900A 415 1800 X 1200 X 2000 2000
IPC150-AHF-100A-V690 100A 690 800 X 800 X 1800 520
IPC150-AHF-200A-V690 200A 690 800 X 800 X 1800 640
IPC150-AHF-300A-V690 300A 690 1200 X 1200 X 1850 780
IPC150-AHF-600A-V690 600A 690 1800 X 1200 X 2000 1000
+ For other IP’s please consult
High Speed
Touch Display
No load Auto
Shutdown
Advanced DSP
Processor
Modular
Configuration
High Efficiency
* 2 numbers 300 Amps is a economical solution
6. DVR is an IGBT based converter system connected in series between the utility grid and to the load. It protects the load
from the voltage disturbance by providing fast, accurate voltage correction for the sag, swell and harmonics, as well as
maintain the continuous load voltage regulation. The load voltage is continuously monitored and controlled to supply the
rated voltage for the load, it requires no energy storage as it draws additional power from the grid to perform its desired
action.
Application
Multi Function Ultra Fast Voltage Stabilization
Voltage Harmonics Voltage UnbalanceVoltage Sag
Dynamic Voltage Restorer
Product Advantages
Typical installation industries include but not limited to,
Sensitive tooling & machinery
Process industry
Robotic welding, painting etc
Cranes
Fiber production and other endless/non-stop processes
Supercomputers (R&D, TV, audio, universities, e.g.)
Semiconductor plants
Regulates the output voltage continuously for the input voltage sag of 3 phase.
Eliminates the 3rd, 5th, 7th, 11th and 13th order voltage harmonics from the grid voltage to the load.
No energy storage is required
Higher efficiency in comparison to UPS
Operates at higher speed then servo stabilizers
Series
IPC150
Voltage waveform for different voltage disturbance
Input Voltage
Voltage Swell Condition
Voltage Sag Condition
DVR Compensating Voltage output Voltage
3 phase raw
utility
3ph sensitive
Load
7. InPhase converters are designed to achieve maximum efficiency and reliability and comply with the strictest grid codes.
Built for easy maintenance, optimized to be compatible with all generator technologies and suitable for on and offshore
applications. Our converters are known for their high degree of reliability and quality.
The converter consists of the Power Unit and the Control Unit. The Power Unit through an inverter bridge consisting of
IGBT switches produces symmetrical, three-phase PWM modulated AC voltage to the grid. The control unit is a high
performance DSP based microprocessor with advanced controls. The controls system applies the control based on the
input received through the feedback system. The processer calculates the IGBT states dynamically and switches the IGBT
accordingly to produce the desired output.
Application
Renewable Energy
Converters
Benefits
Typical installation industries include but not limited to,
Wind mill and Wind farms
Solar Power
High power motors
Energy Storage
Other special applications
Produces high-quality power
Reliable and durable (low maintenance)
High level of automation and connectivity
Easily expandable and customizable solution
Easy monitoring and control
Expert service and support available
Easy to Integrate
Grid friendly
Uses new generation semiconductors
Easy user interface
Converters
Custom
Energy Storage Custom Application
for
All 4-Quadrant Operation