Flow transmitter
•Download as PPTX, PDF•
2 likes•529 views
The document discusses different types of flow transmitters used to measure the flow of liquids and gases. It describes vertical and horizontal Coriolis flow transmitters, which measure flow based on the change in kinetic energy of a fluid. It also describes turbine flow transmitters, which contain a turbine rotor that rotates due to fluid movement and generates pulse signals that are processed to determine the flow rate. Finally, it mentions common applications of flow transmitters in industries like water, petroleum, and chemicals.
Report
Share
Report
Share
Recommended
Current meter, cup type
The document specifies requirements for a cup-type current meter used to measure water velocity and discharge in rivers and canals. It must operate reliably under flow conditions, be easy to use, and include accessories for deployment. Key components are a 6-cup sensor measuring velocities from 0.05-3.5 m/s, various suspension methods including wading rods or cables, and fish weights from 25-100kg for suspended use. Accessories like tools, spare parts, and carrying cases must also be provided.
Current meter, pygmy type
The document specifies requirements for a pygmy-type current meter used for measuring water velocity and discharge in shallow rivers, streams, and canals. It must operate reliably and accurately under prevailing flows, be easy to use and maintain, and include accessories for effective deployment. Key specifications include a 6-cup wheel sensor accurate to 1% or 0.5% full scale depending on velocity, a 3m graduated wading rod, and 10m cables. Accessories include standard tools and spare bearings.
Air flow sensors AUDI A4 B5 1996 2000 1.8 20V 4ADR
The document discusses different types of mass air flow sensors. It describes how a hot wire mass air flow sensor works by using a thermistor and hot wire to measure airflow and output a proportional voltage signal. It also describes how a vane air flow meter and Karman vortex air flow sensor measure airflow and output signals to the ECM to calculate fuel injection. The mass air flow sensor is located in the intake air stream and converts airflow into a voltage signal used by the ECM to determine engine load and calculate fuel injection, ignition timing, and transmission shifting.
Velocity measurement using current meter
This Presentation is an introduction to current meter device specially how to measure flow velocity using current meter,its types and methods used in field.
Current Meters
1. Current meters measure the velocity of fluid flow using various mechanical, electrical, or optical methods.
2. The most commonly used current meters for irrigation and watershed measurements are anemometer and propeller types, which measure velocity using rotating cups or propellers.
3. However, electromagnetic current meters that produce voltage proportional to flow velocity are also widely used, especially by water districts, as they provide direct analog readings without moving parts.
A Smart Flow Measurement System Adaptive to Different Variation Using Ultraso...
A Smart Flow Measurement System Adaptive to Different Variation Using Ultraso...Sheikh R Manihar Ahmed
This Paper Explain the Design of a Smart Flow measurement Technique using Ultrasonic Flow Meter for custody transfer quality. The objective of the work are; (i) to extend the linearity range of measurement to 100% of the input range, (ii) to make the measurement system adaptive to variations in pipe diameter, liquid density, and liquid temperature. An Accurate flow measurement is an essential requirement both from qualitative and economic points of view. Among the non contact type of flow measurement, ultrasonic flow measurement is widely used to measure flow, because of its advantage like high resolution and less interference of noise on output. However, non linear characteristics of Ultrasonic flow meters have restricted its use. An optimal Computational Logic is considered by comparing various schemes and algorithms based on minimization of Mean Square Error and Regression close to one. The output of ultrasonic flow meter is frequency. It is converted to voltage by using a frequency to voltage converter. An optimal Computational logic block is added in cascade to frequency to voltage converter. This arrangement helps to linearise the overall system for 100% of full scale and makes it adaptive to variations in pipe diameter, liquid density, and liquid temperature. Since the proposed Smart flow measurement technique produces output which is adaptive to variations in pipe diameter, liquid density, and liquid temperature, the present technique avoids the requirement of repeated calibration every time there is change in liquid, and/or pipe diameter, and/or liquid temperature. The results show that proposed measurement technique achieves the objectives quite satisfactorily.IAHR 2015 - Wave growth at short fetches, Morris, Deltares, 30062015
This document analyzes wave growth at short fetches to improve the accuracy of the SWAN wave model. It studies three locations along a line perpendicular to a dike with fetches of 10,000m, 1,700m and 850m. The analysis finds that observations at the shorter fetches of 1,700m and 850m lie above theoretical growth curves. Additional parameters like wave steepness and wind gustiness are found to significantly impact wave growth at short fetches, with steeper waves and gustier winds resulting in higher dimensionless wave heights. The conclusions state that accounting for these additional parameters could lead to improved source terms or recalibration of the SWAN model.
Flow meter
A device which is used to measure the volume or mass of a gas or liquid is called as a flow meter. Based on which industry its used in, they are called by various names such as flow indicator, flow rate sensor, flow gauge, liquid meter etc. Irrelevant of which industry they are used in, they all are used to measure flow. Flow meters are also used to measure rivers or streams, or any other open channels.
Recommended
Current meter, cup type
The document specifies requirements for a cup-type current meter used to measure water velocity and discharge in rivers and canals. It must operate reliably under flow conditions, be easy to use, and include accessories for deployment. Key components are a 6-cup sensor measuring velocities from 0.05-3.5 m/s, various suspension methods including wading rods or cables, and fish weights from 25-100kg for suspended use. Accessories like tools, spare parts, and carrying cases must also be provided.
Current meter, pygmy type
The document specifies requirements for a pygmy-type current meter used for measuring water velocity and discharge in shallow rivers, streams, and canals. It must operate reliably and accurately under prevailing flows, be easy to use and maintain, and include accessories for effective deployment. Key specifications include a 6-cup wheel sensor accurate to 1% or 0.5% full scale depending on velocity, a 3m graduated wading rod, and 10m cables. Accessories include standard tools and spare bearings.
Air flow sensors AUDI A4 B5 1996 2000 1.8 20V 4ADR
The document discusses different types of mass air flow sensors. It describes how a hot wire mass air flow sensor works by using a thermistor and hot wire to measure airflow and output a proportional voltage signal. It also describes how a vane air flow meter and Karman vortex air flow sensor measure airflow and output signals to the ECM to calculate fuel injection. The mass air flow sensor is located in the intake air stream and converts airflow into a voltage signal used by the ECM to determine engine load and calculate fuel injection, ignition timing, and transmission shifting.
Velocity measurement using current meter
This Presentation is an introduction to current meter device specially how to measure flow velocity using current meter,its types and methods used in field.
Current Meters
1. Current meters measure the velocity of fluid flow using various mechanical, electrical, or optical methods.
2. The most commonly used current meters for irrigation and watershed measurements are anemometer and propeller types, which measure velocity using rotating cups or propellers.
3. However, electromagnetic current meters that produce voltage proportional to flow velocity are also widely used, especially by water districts, as they provide direct analog readings without moving parts.
A Smart Flow Measurement System Adaptive to Different Variation Using Ultraso...
A Smart Flow Measurement System Adaptive to Different Variation Using Ultraso...Sheikh R Manihar Ahmed
This Paper Explain the Design of a Smart Flow measurement Technique using Ultrasonic Flow Meter for custody transfer quality. The objective of the work are; (i) to extend the linearity range of measurement to 100% of the input range, (ii) to make the measurement system adaptive to variations in pipe diameter, liquid density, and liquid temperature. An Accurate flow measurement is an essential requirement both from qualitative and economic points of view. Among the non contact type of flow measurement, ultrasonic flow measurement is widely used to measure flow, because of its advantage like high resolution and less interference of noise on output. However, non linear characteristics of Ultrasonic flow meters have restricted its use. An optimal Computational Logic is considered by comparing various schemes and algorithms based on minimization of Mean Square Error and Regression close to one. The output of ultrasonic flow meter is frequency. It is converted to voltage by using a frequency to voltage converter. An optimal Computational logic block is added in cascade to frequency to voltage converter. This arrangement helps to linearise the overall system for 100% of full scale and makes it adaptive to variations in pipe diameter, liquid density, and liquid temperature. Since the proposed Smart flow measurement technique produces output which is adaptive to variations in pipe diameter, liquid density, and liquid temperature, the present technique avoids the requirement of repeated calibration every time there is change in liquid, and/or pipe diameter, and/or liquid temperature. The results show that proposed measurement technique achieves the objectives quite satisfactorily.IAHR 2015 - Wave growth at short fetches, Morris, Deltares, 30062015
This document analyzes wave growth at short fetches to improve the accuracy of the SWAN wave model. It studies three locations along a line perpendicular to a dike with fetches of 10,000m, 1,700m and 850m. The analysis finds that observations at the shorter fetches of 1,700m and 850m lie above theoretical growth curves. Additional parameters like wave steepness and wind gustiness are found to significantly impact wave growth at short fetches, with steeper waves and gustier winds resulting in higher dimensionless wave heights. The conclusions state that accounting for these additional parameters could lead to improved source terms or recalibration of the SWAN model.
Flow meter
A device which is used to measure the volume or mass of a gas or liquid is called as a flow meter. Based on which industry its used in, they are called by various names such as flow indicator, flow rate sensor, flow gauge, liquid meter etc. Irrelevant of which industry they are used in, they all are used to measure flow. Flow meters are also used to measure rivers or streams, or any other open channels.
Digi pack
The document analyzes and summarizes the cover art, CD, and back cover of Jason Mraz's album "we sing.we dance. We still things". The simple front cover suggests the album targets teens and twenties with its child-like drawing. In contrast, the CD interior has more random images representing the challenging messages in Mraz's songs. The back cover maintains the black and white color theme while unconventionally listing the tracks without numbers to seem less strict.
Net Neutrality
This ppt is tell one everything one needs to know about net neutrality i.e one of the most hotly debated topic around the world
E-Catalogue
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
Plexus Sept Oct 2013
This issue of Plexus magazine focuses on risk mitigation in healthcare documentation. The main articles discuss a legal case involving poor transcription quality, the importance of documentation ownership and quality, and technology's role in the workplace. Additional sections cover neurodegeneration, medical terminology, a CMT challenge quiz, and news briefs. The issue emphasizes the responsibility of healthcare documentation specialists to implement best practices and risk prevention strategies to protect patients and minimize organizational liability.
Exposición de lengua extranjera i
This document provides vocabulary and instructions for asking for directions to places in a town. It also discusses places that are common to visit in a city, including museums, art galleries, theaters, malls, and neighborhoods. Finally, it introduces vocabulary related to describing areas and features of the home.
Jailan Edward Nasralla CV - V1
Jailan Edward Nasralla Rizk has over 20 years of experience in supply chain and logistics management. He currently serves as Supply Chain Director for Eagle Chemicals Company, where he leads procurement, inventory management, customer service, warehousing, and transportation. Previously, he held logistics management roles at Energizer Egypt Company. Rizk holds a BSc in Commerce from Cairo University and certifications in supply chain management.
Creating a Culture of Innovation in Your Library and Community (Tech Day)
A presentation from NEKLS Tech Day You’ve watched innovative libraries grow and implement many ideas that you wish you could start in your library. But, you’re not sure where to start, or
how to get buy-in, or how to get support. Come to this session for an active and lively discussion on
how to find innovative ideas and
people, get support, and learn from other libraries’ experiences.
My Resume
This document is a resume for Bryan M. Anderson, who is seeking a career in law enforcement after 20 years of military service. He has extensive experience overseeing training, logistics, and operations for over 3,000 personnel in both domestic and foreign locations. His qualifications include top secret clearance, weapons certification, and experience with counterterrorism operations, casualty notification, and sexual assault prevention training. His resume highlights his career progression through roles in protocol supervision, training, operational management, and security, demonstrating strong leadership, problem-solving, and interpersonal skills over a diverse career in the military.
“Personal Branding - me and sharing economy"
Superare la paura si può – acquistare coraggio e fiducia con il Coaching - Grottammare 13 Novembre 15 - Terzo incontro con Tommaso la selva e Monica Carrillo
Industrialsteamgen
Coen Company is a global leader in developing clean combustion technologies for industrial steam generation. They provide boiler burners, burner packages, safety systems, and auxiliary products to help customers achieve optimal environmental and economic performance. Coen offers customized solutions and provides engineering expertise, testing facilities, and manufacturing to develop innovative low-NOx and ultra-low-NOx burners that meet stringent emissions regulations.
Mechanical sensor
This document discusses various types of mechanical sensors and their applications. It describes sensors that measure mechanical phenomena like pressure, force, torque, inertia, and flow. Pressure sensors are used in applications like manometers, barometers, microphones, and automotive parts. Force and torque sensors can be used in control systems, testing equipment, and for measuring power transmission. Inertial sensors like accelerometers have applications in industry, military, vibration monitoring, and safety systems. Flow sensors measure flow rates using principles of heat transfer and are used in microsensors and velocimetry applications. The document provides details on common sensing techniques like piezoresistivity, piezoelectricity, capacitive, inductive and resonant techniques.
Velocity sensors in_robotics
The document discusses various types of velocity and speed sensors. It describes tachometers, which measure rotational speed using AC or DC generators. A laser surface velocimeter uses the Doppler effect to measure speed on moving surfaces without contact. Piezoelectric sensors convert changes in velocity, pressure, or other factors into an electrical charge. Accelerometers measure proper acceleration by detecting changes in velocity over time.
Mechanical sensors
Mechanical sensors measure mechanical phenomena and can be divided into several types. Displacement sensors measure how far or near an object is and include linear variable differential transformers (LVDTs), encoders, and potentiometers. Velocity sensors measure speed, such as wheel speed sensors in vehicles. Torque sensors measure the forces that cause rotation. Flow sensors measure the rate of flow of materials, whether solid, liquid, or gas. Each of these sensor types converts a physical quantity into an electrical signal that can be read by other devices and systems.
Pe 4030 ch 2 sensors and transducers part 2 flow level temp light oct 7, 2016
This document provides an overview of various liquid flow and level sensors, including:
1) Orifice, turbine, electromagnetic, and ultrasonic flow sensors
2) Float, differential pressure, radar, and ultrasonic level sensors
3) Details on the working principles and applications of technologies like guided-wave radar and gravimetric sensing.
The objectives are to understand common sensor types and how to select sensors based on industrial requirements.
Rotational speed measurements.pptx
Rotational speed, also known as revolutions per minute (RPM), measures the number of full rotations made by an object within one minute. It is calculated by dividing the number of rotations by time. Instruments like tachometers are used to measure rotational speed in various applications such as measuring engine speed in vehicles or flow rate in medical devices. There are different types of tachometers including mechanical, electronic, digital, and those that use contact or non-contact methods to measure speed. Rotational speed sensors are also used to measure speed in applications like wheel speed sensors in vehicles. Viscometers use rotational viscometry techniques to measure viscosity by rotating a spindle in a fluid and measuring its rotational speed.
Exposure to energy audit equipment
The document discusses various equipment used for energy auditing including thermocouples, pressure gauges, flow meters, and other diagnostic tools. Thermocouples measure temperature using the voltage created by different metals welded together. Pressure can be measured to distinguish between fans, blowers, and compressors. Flow meters include differential pressure meters and laser Doppler anemometers, while particle image velocimetry uses tracer particles and cameras to map velocity vectors in flows. Radioactive particle tracking also analyzes particle movement.
Water meters and its uses by Mohd Kashif
Water meters measure how much water a home or business uses. They work similarly to gas or electricity meters. Meters allow water usage to be tracked and billed accordingly. There are different types of meters that use displacement or velocity to measure water flow. Factors like pipe size and flow rate determine which type of meter is suitable. Meters provide benefits like encouraging conservation and detecting leaks, but also involve costs for installation, reading, and replacement over their lifespan.
Instrumentation And Control Data for Specialist.
Instrumentation Variable Like Pressure Temperature Flow & Level. Also Control Valve, Transmitters, Measuring And Sensing Instruments. Transducers and Control Loops. 4 to 20 mA wiring Types. Fire Alarm Devices. Manifolds
Temperature & Flow By MMS
This document discusses temperature and flow measurement. It begins by defining temperature and the common units used to measure it. There are two main methods for measuring temperature - electrical and non-electrical. Electrical methods include thermocouples, thermistors, and RTDs, which convert temperature into an electrical signal. Non-electrical methods include infrared thermometers and glass thermometers. The document also defines flow and common flow measurement units. Main flow measurement devices are discussed, including orifice plates, vortex meters, pitot tubes, and magnetic and turbine flow meters. These devices are used across industries like oil/gas, water treatment, and manufacturing.
Design_and_Development_of_Automatic_Wate.pdf
Effectiveirrigation water management beginswith timingand regulating irrigation water application in away that will satisfy the need of the crop without wastingwater,soil and cropnutrients. Thisinvolvessupplying water according to the crop requirement, quantity that canbe heldby the soil and is available tothe crop at ratestolerated according to the soil characteristics.So measuringwater infields is veryessential step in irrigation management systems. Thereare manywater flow measurement techniques aswell as different types of water flow meters used inirrigation tomeasure thevolume ofwaterflow in pipelines but these all are too costly. This paper describes design and development of low cost automaticwaterflow meter which supplies only required amount of water to the crops saving water as well as energy.G1/2 HallEffectwater flow sensor is usedas a sensing unitwith a turbine rotor inside it whosespeed of rotationchanges with the different rate of flowofwater.The Hall Effect sensoroutputs the corresponding pulse train for frequency input to the microcontroller.The whole system comprises of AT89S52microcontroller,G1/2 Hall Effect water flow sensor, relay, optocoupler, a water pump, 5V supply, LCD,keypadand some passive components.The AT89S52 microcontroller is programmedinKeildevelopment Tool
More Related Content
Viewers also liked
Digi pack
The document analyzes and summarizes the cover art, CD, and back cover of Jason Mraz's album "we sing.we dance. We still things". The simple front cover suggests the album targets teens and twenties with its child-like drawing. In contrast, the CD interior has more random images representing the challenging messages in Mraz's songs. The back cover maintains the black and white color theme while unconventionally listing the tracks without numbers to seem less strict.
Net Neutrality
This ppt is tell one everything one needs to know about net neutrality i.e one of the most hotly debated topic around the world
E-Catalogue
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
Plexus Sept Oct 2013
This issue of Plexus magazine focuses on risk mitigation in healthcare documentation. The main articles discuss a legal case involving poor transcription quality, the importance of documentation ownership and quality, and technology's role in the workplace. Additional sections cover neurodegeneration, medical terminology, a CMT challenge quiz, and news briefs. The issue emphasizes the responsibility of healthcare documentation specialists to implement best practices and risk prevention strategies to protect patients and minimize organizational liability.
Exposición de lengua extranjera i
This document provides vocabulary and instructions for asking for directions to places in a town. It also discusses places that are common to visit in a city, including museums, art galleries, theaters, malls, and neighborhoods. Finally, it introduces vocabulary related to describing areas and features of the home.
Jailan Edward Nasralla CV - V1
Jailan Edward Nasralla Rizk has over 20 years of experience in supply chain and logistics management. He currently serves as Supply Chain Director for Eagle Chemicals Company, where he leads procurement, inventory management, customer service, warehousing, and transportation. Previously, he held logistics management roles at Energizer Egypt Company. Rizk holds a BSc in Commerce from Cairo University and certifications in supply chain management.
Creating a Culture of Innovation in Your Library and Community (Tech Day)
A presentation from NEKLS Tech Day You’ve watched innovative libraries grow and implement many ideas that you wish you could start in your library. But, you’re not sure where to start, or
how to get buy-in, or how to get support. Come to this session for an active and lively discussion on
how to find innovative ideas and
people, get support, and learn from other libraries’ experiences.
My Resume
This document is a resume for Bryan M. Anderson, who is seeking a career in law enforcement after 20 years of military service. He has extensive experience overseeing training, logistics, and operations for over 3,000 personnel in both domestic and foreign locations. His qualifications include top secret clearance, weapons certification, and experience with counterterrorism operations, casualty notification, and sexual assault prevention training. His resume highlights his career progression through roles in protocol supervision, training, operational management, and security, demonstrating strong leadership, problem-solving, and interpersonal skills over a diverse career in the military.
“Personal Branding - me and sharing economy"
Superare la paura si può – acquistare coraggio e fiducia con il Coaching - Grottammare 13 Novembre 15 - Terzo incontro con Tommaso la selva e Monica Carrillo
Industrialsteamgen
Coen Company is a global leader in developing clean combustion technologies for industrial steam generation. They provide boiler burners, burner packages, safety systems, and auxiliary products to help customers achieve optimal environmental and economic performance. Coen offers customized solutions and provides engineering expertise, testing facilities, and manufacturing to develop innovative low-NOx and ultra-low-NOx burners that meet stringent emissions regulations.
Viewers also liked (12)
Creating a Culture of Innovation in Your Library and Community (Tech Day)
Creating a Culture of Innovation in Your Library and Community (Tech Day)
Similar to Flow transmitter
Mechanical sensor
This document discusses various types of mechanical sensors and their applications. It describes sensors that measure mechanical phenomena like pressure, force, torque, inertia, and flow. Pressure sensors are used in applications like manometers, barometers, microphones, and automotive parts. Force and torque sensors can be used in control systems, testing equipment, and for measuring power transmission. Inertial sensors like accelerometers have applications in industry, military, vibration monitoring, and safety systems. Flow sensors measure flow rates using principles of heat transfer and are used in microsensors and velocimetry applications. The document provides details on common sensing techniques like piezoresistivity, piezoelectricity, capacitive, inductive and resonant techniques.
Velocity sensors in_robotics
The document discusses various types of velocity and speed sensors. It describes tachometers, which measure rotational speed using AC or DC generators. A laser surface velocimeter uses the Doppler effect to measure speed on moving surfaces without contact. Piezoelectric sensors convert changes in velocity, pressure, or other factors into an electrical charge. Accelerometers measure proper acceleration by detecting changes in velocity over time.
Mechanical sensors
Mechanical sensors measure mechanical phenomena and can be divided into several types. Displacement sensors measure how far or near an object is and include linear variable differential transformers (LVDTs), encoders, and potentiometers. Velocity sensors measure speed, such as wheel speed sensors in vehicles. Torque sensors measure the forces that cause rotation. Flow sensors measure the rate of flow of materials, whether solid, liquid, or gas. Each of these sensor types converts a physical quantity into an electrical signal that can be read by other devices and systems.
Pe 4030 ch 2 sensors and transducers part 2 flow level temp light oct 7, 2016
This document provides an overview of various liquid flow and level sensors, including:
1) Orifice, turbine, electromagnetic, and ultrasonic flow sensors
2) Float, differential pressure, radar, and ultrasonic level sensors
3) Details on the working principles and applications of technologies like guided-wave radar and gravimetric sensing.
The objectives are to understand common sensor types and how to select sensors based on industrial requirements.
Rotational speed measurements.pptx
Rotational speed, also known as revolutions per minute (RPM), measures the number of full rotations made by an object within one minute. It is calculated by dividing the number of rotations by time. Instruments like tachometers are used to measure rotational speed in various applications such as measuring engine speed in vehicles or flow rate in medical devices. There are different types of tachometers including mechanical, electronic, digital, and those that use contact or non-contact methods to measure speed. Rotational speed sensors are also used to measure speed in applications like wheel speed sensors in vehicles. Viscometers use rotational viscometry techniques to measure viscosity by rotating a spindle in a fluid and measuring its rotational speed.
Exposure to energy audit equipment
The document discusses various equipment used for energy auditing including thermocouples, pressure gauges, flow meters, and other diagnostic tools. Thermocouples measure temperature using the voltage created by different metals welded together. Pressure can be measured to distinguish between fans, blowers, and compressors. Flow meters include differential pressure meters and laser Doppler anemometers, while particle image velocimetry uses tracer particles and cameras to map velocity vectors in flows. Radioactive particle tracking also analyzes particle movement.
Water meters and its uses by Mohd Kashif
Water meters measure how much water a home or business uses. They work similarly to gas or electricity meters. Meters allow water usage to be tracked and billed accordingly. There are different types of meters that use displacement or velocity to measure water flow. Factors like pipe size and flow rate determine which type of meter is suitable. Meters provide benefits like encouraging conservation and detecting leaks, but also involve costs for installation, reading, and replacement over their lifespan.
Instrumentation And Control Data for Specialist.
Instrumentation Variable Like Pressure Temperature Flow & Level. Also Control Valve, Transmitters, Measuring And Sensing Instruments. Transducers and Control Loops. 4 to 20 mA wiring Types. Fire Alarm Devices. Manifolds
Temperature & Flow By MMS
This document discusses temperature and flow measurement. It begins by defining temperature and the common units used to measure it. There are two main methods for measuring temperature - electrical and non-electrical. Electrical methods include thermocouples, thermistors, and RTDs, which convert temperature into an electrical signal. Non-electrical methods include infrared thermometers and glass thermometers. The document also defines flow and common flow measurement units. Main flow measurement devices are discussed, including orifice plates, vortex meters, pitot tubes, and magnetic and turbine flow meters. These devices are used across industries like oil/gas, water treatment, and manufacturing.
Design_and_Development_of_Automatic_Wate.pdf
Effectiveirrigation water management beginswith timingand regulating irrigation water application in away that will satisfy the need of the crop without wastingwater,soil and cropnutrients. Thisinvolvessupplying water according to the crop requirement, quantity that canbe heldby the soil and is available tothe crop at ratestolerated according to the soil characteristics.So measuringwater infields is veryessential step in irrigation management systems. Thereare manywater flow measurement techniques aswell as different types of water flow meters used inirrigation tomeasure thevolume ofwaterflow in pipelines but these all are too costly. This paper describes design and development of low cost automaticwaterflow meter which supplies only required amount of water to the crops saving water as well as energy.G1/2 HallEffectwater flow sensor is usedas a sensing unitwith a turbine rotor inside it whosespeed of rotationchanges with the different rate of flowofwater.The Hall Effect sensoroutputs the corresponding pulse train for frequency input to the microcontroller.The whole system comprises of AT89S52microcontroller,G1/2 Hall Effect water flow sensor, relay, optocoupler, a water pump, 5V supply, LCD,keypadand some passive components.The AT89S52 microcontroller is programmedinKeildevelopment Tool
Design and development of automatic Water flow meter
This document describes the design and development of an automatic low-cost water flow meter. It uses a G1/2 Hall Effect water flow sensor with a turbine rotor to measure water flow rate. As the rotor spins, the Hall sensor outputs a pulse train proportional to the flow rate. An AT89S52 microcontroller is programmed to convert this to a flow rate measurement displayed on an LCD. The system automatically turns off the water pump after a preset time to conserve water as per crop needs. Testing showed the sensor readings closely matched actual flow rates between multiplication factors of 1.7-2.0.
DESIGN AND DEVELOPMENT OF AUTOMATIC WATER FLOW METER
Effective irrigation water management begins with timing and regulating irrigation water application in a
way that will satisfy the need of the crop without wasting water, soil and crop nutrients. This involves
supplying water according to the crop requirement, quantity that can be held by the soil and is available to
the crop at rates tolerated according to the soil characteristics. So measuring water in fields is very
essential step in irrigation management systems. There are many water flow measurement techniques as
well as different types of water flow meters used in irrigation to measure the volume of water flow in
pipelines but these all are too costly. This paper describes design and development of low cost automatic
water flow meter which supplies only required amount of water to the crops saving water as well as energy.
G1/2 Hall Effect water flow sensor is used as a sensing unit with a turbine rotor inside it whose speed of
rotation changes with the different rate of flow of water. The Hall Effect sensor outputs the corresponding
pulse train for frequency input to the microcontroller. The whole system comprises of AT89S52
microcontroller, G1/2 Hall Effect water flow sensor, relay, optocoupler, a water pump, 5V supply, LCD,
keypad and some passive components. The AT89S52 microcontroller is programmed in Keil development
Tool.
Instrumentation in oil refinery
In this presentation how flow rate, pressure, temperature and level in tank measure in refinery or any industry with different instrument are discussed.
Measurement of motion, force and torque
Measurement of Motion, Force
and Torque - Displacement and speed measurement for translational and rotation systems using
potentiometers, LVDT and RVDT, Encoders, accelerometers and gyroscopes. Force and Torque
measurements using strain gauges and piezoelectric pickups.
MEASUREMENT OF FORCE, POWER AND TEMPERATURE
the above PPT will give a brief idea of the measuring device used in the field of Mechanical Engineering with images related to the topics in the field of measurement.
Water monitoring instruments
This document discusses various instruments for monitoring water levels and flow rates. It describes digital water level recorders that remotely monitor and record groundwater levels. It also covers several types of flow meters: electromagnetic and ultrasonic meters that have no moving parts; mechanical meters that measure flow via rotating turbines; velocity meters with protected sensors; and open channel meters using ultrasonic measurement of flow in canals or flumes. Key features of each type are outlined. Contact information is provided for the manufacturer.
micro-project on different types of flow measuring devices
This document discusses different types of flow measuring devices, including:
1. Rotameter - Measures flow using a float that rises and falls in a tapered glass tube based on flow rate. Commonly used for low flow rates of liquids and gases.
2. Anemometer - Measures flow velocity using a heated wire sensor and circuitry to determine cooling from the flow. Used for measuring fluctuating gas flows.
3. Coriolis flowmeter - Measures mass flow rate using vibrating tubes that deform based on flow rate. Independent of fluid properties and provides highly accurate measurements.
Instrumentation
This document summarizes various instrumentation devices used for measurement and control. It discusses mechanical, electrical, and electronic instruments. It also describes different types of transducers including temperature, pressure, flow, strain, and proximity sensors. The key measurement principles and applications of instruments like RTDs, thermocouples, thermistors, bourdon tubes, load cells, and inductive proximity sensors are summarized.
Energy Audit of Tubewells Presentation Slides
This document discusses an energy audit of tube wells operated by WASA LDA Lahore. It introduces the purpose of an energy audit to identify ways to reduce energy consumption and lower costs. It then describes several devices used to monitor various energy and operational parameters of the tube wells, including ultrasonic flow meters, water level detectors, pressure loggers, data loggers, power analyzers, temperature/vibration meters, and tachometers. The document concludes that most older tube wells could not have their pumping system efficiencies accurately evaluated due to water level measurement issues, while more recently installed tube wells with newer equipment are in better working condition and have higher pumping efficiencies.
Basic flow measurement
This document provides an overview of basic flow measurement. It discusses 23 types of flow meter technologies available since 1989. It also covers the basic requirements for flow measurement such as accuracy, integration with piping systems, and cost. Finally, it describes common flow meter types like orifice plates, electromagnetic meters, turbine meters, Coriolis meters and positive displacement meters; and the principles of operation for each.
Similar to Flow transmitter (20)
Pe 4030 ch 2 sensors and transducers part 2 flow level temp light oct 7, 2016
Pe 4030 ch 2 sensors and transducers part 2 flow level temp light oct 7, 2016
Design and development of automatic Water flow meter
Design and development of automatic Water flow meter
DESIGN AND DEVELOPMENT OF AUTOMATIC WATER FLOW METER
DESIGN AND DEVELOPMENT OF AUTOMATIC WATER FLOW METER
micro-project on different types of flow measuring devices
micro-project on different types of flow measuring devices
Recently uploaded
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
Understanding Inductive Bias in Machine Learning
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
Literature Review Basics and Understanding Reference Management.pptx
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
New techniques for characterising damage in rock slopes.pdf
rock mass characterization and New techniques for characterising damage in rock slopes
Recycled Concrete Aggregate in Construction Part III
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
DfMAy 2024 - key insights and contributions
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
Kinematics 11th jpp- 01. ( Solved ) unacademy namo kaul on 14th may...
A review on techniques and modelling methodologies used for checking electrom...
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
Technical Drawings introduction to drawing of prisms
Method of technical Drawing of prisms,and cylinders.
ACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
Recently uploaded (20)
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
2. Operations Strategy in a Global Environment.ppt
2. Operations Strategy in a Global Environment.ppt
Literature Review Basics and Understanding Reference Management.pptx
Literature Review Basics and Understanding Reference Management.pptx
New techniques for characterising damage in rock slopes.pdf
New techniques for characterising damage in rock slopes.pdf
Recycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part III
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
Technical Drawings introduction to drawing of prisms
Technical Drawings introduction to drawing of prisms
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
Flow transmitter
- 1. Md. Merajul Islam ID:555131021 2nd batch, 5th semester Dept. of EEE Presented To Shaown Ahmed Course teacher Measurement and Instrumentation
- 2. Special Types of Flow Transmitter
- 3. Flow measurement is the quantification of bulk fluid movement.
- 4. The flow rate is determined inferentially by measuring the liquid's velocity or the change in kinetic energy.
- 5. Instruments used for measuring flow of liquid or gas is known as Flow transmitters. Flow transmitters provide electrical outputs that are proportional to flow inputs.
- 6. 1.Vertical flow transmitter 2.Horizontal flow transmitter 3.Turbine flow transmitter
- 7. Vertical and Horizontal flow transmitter: Coriolis flowmeters are known as vertical and horizontal flow transmitter with respect to their installation variation.
- 8. Vertical and Horizontal flow transmitter:
- 9. Turbine flow transmitter Translates the mechanical action of the turbine rotating in the liquid flow around an axis into a user-readable rate of flow
- 10. Constructed with permanent magnet coil and rotor blades also made by magnetic materials.
- 11. The movement of fluid generate pulse signal and the transmitter processes the pulse signal to determine the flow of the fluid. Operation of turbine flow transmitter
- 12. Flow meters are used for the measurement of natural gas and liquid flow Applications of flow transmitter water, petroleum, and chemical industries.
- 13. Thanks