This document provides information on applying Fire Security Systems' FS11 and FS15 cable coatings, including:
- Product descriptions of the intumescent coatings FS11 and FM-approved FS15 for fire protection of electrical cables.
- Recommendations for airless spray equipment, pumps, hoses, guns and tips for proper application of the coatings.
- Guidelines for surface preparation, application procedures, drying times, and clean-up of equipment.
- Notes on storage and application temperatures for the coatings.
Intumescent Sealant - Steel Fire Protection | Firestopping | Fire Stopping | ...Fire Security System
Install FS23A Acoustic Intumescent Sealant to Provide Up to 4 Hours Fire Protection. Fire Security Systems experts provide Fire Stop Services, Fire Stopping, Fire Coating, Fireproofing Spray, Firestop Compound, Fireproofing, Steel Fire Protection, Cable Coating, Intumescent Coatings and Fire Protection Products worldwide like Middle East, USA, Canada, Africa, Bahrain, Saudi Arabia, Turkmenistan, Malaysia, Indonesia, UAE
Polypipe Comtite cable protection plugs, when used in conjunction with the insertable cable grommets, ensures full compliance with the requirements of Series 1530 of the Highways Agency Specification for Highway Works and is the only transit system accredited by the BBA for motorways comms. When used with Ridgiduct the Comtite cable duct seal completes a certified sealed system.
CSD RISE duct seal system is a multi-cable and pipe transit sealing system. CSD RISE provides an effective and simple solution to all fire, gas and watertight duct sealing requirements. The duct seal system will provide a certified pressure rating of up to 2.5 bar and can be made fire tight by using fire resistant RISE duct sleeves.
Intumescent Sealant - Steel Fire Protection | Firestopping | Fire Stopping | ...Fire Security System
Install FS23A Acoustic Intumescent Sealant to Provide Up to 4 Hours Fire Protection. Fire Security Systems experts provide Fire Stop Services, Fire Stopping, Fire Coating, Fireproofing Spray, Firestop Compound, Fireproofing, Steel Fire Protection, Cable Coating, Intumescent Coatings and Fire Protection Products worldwide like Middle East, USA, Canada, Africa, Bahrain, Saudi Arabia, Turkmenistan, Malaysia, Indonesia, UAE
Polypipe Comtite cable protection plugs, when used in conjunction with the insertable cable grommets, ensures full compliance with the requirements of Series 1530 of the Highways Agency Specification for Highway Works and is the only transit system accredited by the BBA for motorways comms. When used with Ridgiduct the Comtite cable duct seal completes a certified sealed system.
CSD RISE duct seal system is a multi-cable and pipe transit sealing system. CSD RISE provides an effective and simple solution to all fire, gas and watertight duct sealing requirements. The duct seal system will provide a certified pressure rating of up to 2.5 bar and can be made fire tight by using fire resistant RISE duct sleeves.
In sealing challenges when connecting fitting and glass doors we need to be careful to assure soft connection in order to protect and avoid damaging the connection. This has to be done without risking leaking connections.
Our answer is to use a TESNIT® product proving to supply a waterproof gasket.
It is not enough just to have a top-quality door hinge or fitting.
Especially heavy duty usage environment life calls for durability.
The TESNIT® product is composed of cellulose fibres, inorganic fillers and NBR binder.
As such, it has very good mechanical and sealing properties.
This product is a type of Silicone Coated Resistors, which is a type of Wire Wound Resistors. Features of this product are: Edge wound resistive strip for reduced surface temperature, High dissipation and very low ohmic values available, UL approved flame retardant coating, Radial terminals for Amp 187 & Amp 250 connectors available, Choice of anti-rust stainless steel terminations. This products is consumable for High power dissipation and impulse handling capability, High Voltage Bleeder resistor in power supplies, Load Bank Resistors.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/rsr/
Ingress Protection (IP) Codes are marked on products to inform the consumer and the inspection authority to what level of “ingress” the product is rated = what level of protection from foreign objects and moisture the product enclosure provides. Many International Product Safety Standards require a specific minimum IP rating to insure that the product enclosure provides sufficient protection according to the intended environment in which the product will be used. For example: indoor use only, protected outdoor use, exposed outdoor use, submersion, etc.
Each “IP Code” correlates to a specific test program. By understanding the IP Codes and which IP Code is required for your product, you may then determine the specific environmental tests specified for compliance. This information is critical to know PRIOR to the product design to insure a 1st time compliant product.
Fire Security Systems, we supply several Firestopping products dependent on regional applications. We supply the Fire Security Systems Range, specializing in EN and BS476 approvals.
Fire Security Systems, we supply several Firestopping products dependent on regional applications. We supply the Fire Security Systems Range, specializing in EN and BS476 approvals.
In sealing challenges when connecting fitting and glass doors we need to be careful to assure soft connection in order to protect and avoid damaging the connection. This has to be done without risking leaking connections.
Our answer is to use a TESNIT® product proving to supply a waterproof gasket.
It is not enough just to have a top-quality door hinge or fitting.
Especially heavy duty usage environment life calls for durability.
The TESNIT® product is composed of cellulose fibres, inorganic fillers and NBR binder.
As such, it has very good mechanical and sealing properties.
This product is a type of Silicone Coated Resistors, which is a type of Wire Wound Resistors. Features of this product are: Edge wound resistive strip for reduced surface temperature, High dissipation and very low ohmic values available, UL approved flame retardant coating, Radial terminals for Amp 187 & Amp 250 connectors available, Choice of anti-rust stainless steel terminations. This products is consumable for High power dissipation and impulse handling capability, High Voltage Bleeder resistor in power supplies, Load Bank Resistors.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/rsr/
Ingress Protection (IP) Codes are marked on products to inform the consumer and the inspection authority to what level of “ingress” the product is rated = what level of protection from foreign objects and moisture the product enclosure provides. Many International Product Safety Standards require a specific minimum IP rating to insure that the product enclosure provides sufficient protection according to the intended environment in which the product will be used. For example: indoor use only, protected outdoor use, exposed outdoor use, submersion, etc.
Each “IP Code” correlates to a specific test program. By understanding the IP Codes and which IP Code is required for your product, you may then determine the specific environmental tests specified for compliance. This information is critical to know PRIOR to the product design to insure a 1st time compliant product.
Fire Security Systems, we supply several Firestopping products dependent on regional applications. We supply the Fire Security Systems Range, specializing in EN and BS476 approvals.
Fire Security Systems, we supply several Firestopping products dependent on regional applications. We supply the Fire Security Systems Range, specializing in EN and BS476 approvals.
A product launch power point for NGS sequencing qPCR Quantification kit. A unique kit directly measures library concentration, providing the fast and reliable solution for cluster density estimation for NGS.
Deep Sharing is a UX mobile app project, it's a new way to begin or maintain your recovery. We cater to moderation management and sobriety. Find and rate meetings,
track your progress with custom daily goals with the suppot of our community.
Webinar: Human Centered Design with frog EPIPNational
Join a frog Designer for an introduction to what Human Centered Design is, how it works in practice and explore case studies to spark conversation about how it can add value to your work, the work of your grantees and the pressing social issues you care about. frog works with non-profits, social change organizations and companies around the world. They have designed life changing tools and platforms. Learn more about frog here.
More about the Presenter:
Lilian Tse, Senior Program Manager, Global Social Impact Lead
Lilian is the Global Program Manager for frog’s Social Impact Practice and one of the founders of the frog London studio. Lilian’s main focus is leading projects that involve design research as a core component in emerging and developed markets. She has travelled extensively on projects across Asia (e.g., China, Laos, Sri Lanka) and Africa (e.g., Rwanda, Ghana, Kenya).
Lilian is passionate about cross-sector collaboration and has extensive experience leading projects that require alignment from a range of stakeholders on topics that include finance, agriculture, and health.
Prior to frog, Lilian worked as a consultant at McKinsey and the Corporate Executive Board (CEB).
Lilian received her BA from Brown University, MBA at MIT Sloan, and Master of Public Administration from Columbia University.
Steel Fire Protection - Fireproofing Steel | Intumescent Coatings | Cable Coa...Fire Security System
Steel Fire Protection experts providing installation and application of structural steel fire protection for Indoor and Outdoor. We provide reliable and cost effective Steel Fire Protection, Intumescent Coatings, Fire Coating, Cable Coating, Fire Stopping, Fireproofing Spray, Fireproofing and Fire Protection Products worldwide like Middle East, USA, Canada, Africa, , Bahrain, Saudi Arabia, Turkmenistan, Malaysia
View the latest Gates Leak-free port to port brochure illustrating how Gates hydraulic products work together to give you just one part, or the complete solution to your fluid power needs.
Prysmian offers a comprehensive range of flexible cable solutions with Class 5 conductors for fixed installations. With Flexible XLPE and Fire Performance cables, Prysmian has a full suite of cables for the entire Construction market.
Partnering with experienced wire harness manufacturers in India can save you time otherwise invested in considering all the fine details of a wire harness, in order to make it apt for your particular application.
At present, COMPAQ produces a complete range of heat shrink and cold shrink cable accessories for low, medium and high voltage applications. We are making wide range of heat shrinkable tubings, molded components, end caps, flame retardant tubes, insulating tubes, non tracking tubes etc. Compaq International’s products are meticulously designed and manufactured with top quality materials and undergo several quality checks before they are dispatched to our clients. Compaq International also offers top class pre-sales and post-sales services to ensure that its clients have a smooth experience in purchasing, installing, and putting our products to use.
To inquire more about our cable accessories, call us on +918683961010 or write to us at info@compaqinternational.com or visit us at www.compaqinternational.com
#cablejoints #cable terminations #cableaccessories #powercableaccessories #coldshrink #heatshrink #cablejointingkits #cableterminations #premouldedcablejoints #makeinindia #straightjoints #cableterminationkits
Vizyon İnovatif Yalıtım Ltd.Şti günümüz yalıtım ihtiyaçlarına inovatif çözümler sunmak amacı ile 2015 de kurulmuştur. Termal yalıtım, gürültü ve titreşim sönümleme, yüksek ısı ve kriyojenik yalıtım ve yangın yalıtımı alanında, en ileri teknoloji ürün, hizmet ve dizayn alanında hizmet vermektedir.
VRTS Industrial Solutions Pvt Ltd offers cost effective solutions for New Business Development of Industrial & Automotive products in India. It also provides solutions for sourcing & setting up manufacturing activities in India.
PCB Conformal Coating and Potting ServicesSuntronicInc
Suntronic Inc. offers different types of Conformal Coating Services like Silicones, Acrylic, Parylene, Epoxy Coating, Polyuethane Coating and Thin Film/Nano Coatings which are well-known for accuracy and consistency. Feel free to contact us today to discuss your PCB conformal coating requirements. Our experts would be happy to assist you in choosing the right conformal coating material for your PCBs.
Similar to Fire Coating Korea - Fireproofing Spray | Fireproofing Steel in Korea (20)
Cable Fire Protection - Coatings | Cable Coating | Intumescent Cable CoatingFire Security System
Cable Fire Protection with Exterior/Interior Cable Coating for Fire Stopping and Fireproofing. Intumescent Passive Fire Protection Specialist provides Cable Coating with Fireproofing Spray, Fire Coating, Intumescent Cable Coating, Electrical Cable Fire Protection and Commercial Coating Services in USA, Canada, Africa, Middle East, Bahrain, Saudi Arabia, Turkmenistan, Malaysia
Fire Security Systems, we supply several Firestopping products dependent on regional applications. We supply the Fire Security Systems Range, specializing in EN and BS476 approvals.
Water Based Intumescent Steel Coating - Fireproofing Steel Canada | Fireproof...Fire Security System
Steel Fire Protection experts providing installation and application of structural steel fire protection for Indoor and Outdoor. We provide reliable and cost effective Steel Fire Protection, Intumescent Coatings, Fire Coating, Cable Coating, Fire Stopping, Fireproofing Spray, Fireproofing and Fire Protection Products worldwide like Middle East, USA, Canada, Africa, , Bahrain, Saudi Arabia, Turkmenistan, Malaysia
Water Based Intumescent Steel Coating - Fireproofing Steel Canada | Fireproof...Fire Security System
Steel Fire Protection experts providing installation and application of structural steel fire protection for Indoor and Outdoor. We provide reliable and cost effective Steel Fire Protection, Intumescent Coatings, Fire Coating, Cable Coating, Fire Stopping, Fireproofing Spray, Fireproofing and Fire Protection Products worldwide like Middle East, USA, Canada, Africa, , Bahrain, Saudi Arabia, Turkmenistan, Malaysia
Putting the SPARK into Virtual Training.pptxCynthia Clay
This 60-minute webinar, sponsored by Adobe, was delivered for the Training Mag Network. It explored the five elements of SPARK: Storytelling, Purpose, Action, Relationships, and Kudos. Knowing how to tell a well-structured story is key to building long-term memory. Stating a clear purpose that doesn't take away from the discovery learning process is critical. Ensuring that people move from theory to practical application is imperative. Creating strong social learning is the key to commitment and engagement. Validating and affirming participants' comments is the way to create a positive learning environment.
Recruiting in the Digital Age: A Social Media MasterclassLuanWise
In this masterclass, presented at the Global HR Summit on 5th June 2024, Luan Wise explored the essential features of social media platforms that support talent acquisition, including LinkedIn, Facebook, Instagram, X (formerly Twitter) and TikTok.
Implicitly or explicitly all competing businesses employ a strategy to select a mix
of marketing resources. Formulating such competitive strategies fundamentally
involves recognizing relationships between elements of the marketing mix (e.g.,
price and product quality), as well as assessing competitive and market conditions
(i.e., industry structure in the language of economics).
3.0 Project 2_ Developing My Brand Identity Kit.pptxtanyjahb
A personal brand exploration presentation summarizes an individual's unique qualities and goals, covering strengths, values, passions, and target audience. It helps individuals understand what makes them stand out, their desired image, and how they aim to achieve it.
Kseniya Leshchenko: Shared development support service model as the way to ma...Lviv Startup Club
Kseniya Leshchenko: Shared development support service model as the way to make small projects with small budgets profitable for the company (UA)
Kyiv PMDay 2024 Summer
Website – www.pmday.org
Youtube – https://www.youtube.com/startuplviv
FB – https://www.facebook.com/pmdayconference
Personal Brand Statement:
As an Army veteran dedicated to lifelong learning, I bring a disciplined, strategic mindset to my pursuits. I am constantly expanding my knowledge to innovate and lead effectively. My journey is driven by a commitment to excellence, and to make a meaningful impact in the world.
VAT Registration Outlined In UAE: Benefits and Requirementsuae taxgpt
Vat Registration is a legal obligation for businesses meeting the threshold requirement, helping companies avoid fines and ramifications. Contact now!
https://viralsocialtrends.com/vat-registration-outlined-in-uae/
Event Report - SAP Sapphire 2024 Orlando - lots of innovation and old challengesHolger Mueller
Holger Mueller of Constellation Research shares his key takeaways from SAP's Sapphire confernece, held in Orlando, June 3rd till 5th 2024, in the Orange Convention Center.
Digital Transformation and IT Strategy Toolkit and TemplatesAurelien Domont, MBA
This Digital Transformation and IT Strategy Toolkit was created by ex-McKinsey, Deloitte and BCG Management Consultants, after more than 5,000 hours of work. It is considered the world's best & most comprehensive Digital Transformation and IT Strategy Toolkit. It includes all the Frameworks, Best Practices & Templates required to successfully undertake the Digital Transformation of your organization and define a robust IT Strategy.
Editable Toolkit to help you reuse our content: 700 Powerpoint slides | 35 Excel sheets | 84 minutes of Video training
This PowerPoint presentation is only a small preview of our Toolkits. For more details, visit www.domontconsulting.com
Hamster Kombat' Telegram Game Surpasses 100 Million Players—Token Release Sch...
Fire Coating Korea - Fireproofing Spray | Fireproofing Steel in Korea
1. Fire Security Systems FZC
Cable Coating Application Manual
FS11 / FS15
FIRE SECURITY SYSTEMS
Canada:
PO Box 21096, Coquitlam BC V3E 3P9 Canada
Tel:+1 604 941 1001 Fax: +1 604 648 9311
mail@fire-security.net
www.Fire-Security.net
Dubai, UAE:
PO Box 40068 Ajman - UAE
Tel: +971 6 7478842 Fax: +971 6 7478843
Norway:
Skibåsen 20b -4636 Kristiansand Norway
Tel:+ 47 95 47 80 00 Fax: +47 38 02 15 31
2. 2 | P a g e
Table of Contents
Introduction ……………………………………………………………… Page 3
Product Description ……………………………………………………………… Page 4
FS11 ……………………………………………………………… Page 4
FS15 ……………………………………………………………… Page 4
Equipment Recommendations ……………………………………………………………… Page 5
Pumps, Hoses, Spray Guns, Tips ……………………………………………………………… Page 5
Spare Parts and Accessories ……………………………………………………………… Page 6
Miscellaneous Equipment ……………………………………………………………… Page 7
Surface Preparation ……………………………………………………………… Page 8
Airless Application ……………………………………………………………… Page 9
Equipment Operation ……………………………………………………………… Page 9
Airless Spray Application ……………………………………………………………… Page 9
Down Time and Clean Up ……………………………………………………………… Page 10
Important Application Procedures ……………………………………………………………… Page 11
3. 3 | P a g e
Introduction
This manual has been prepared to provide you with basic information for the application methods of Fire Security
Systems FS11 and FS15 Cable Coating. Further, equipment recommendations and application suggestions are
included to assist you and your project supervisor in proper preparation and execution of work. The objective of
this manual is to explain the necessary components and methods to provide the required fire protection as specified
by the owner or designer.
It is your responsibility, as a competent and professional applicator, to apply the product in accordance with
appropriate tests and in compliance with recommendations. It is important that you have full knowledge of our
product(s) and its application methods in order to maintain our record of proven performance and consistent
customer satisfaction. We urge your studied review of the information contained in this manual and the
transmission of this same information to all personnel who will be involved in the application of Fire Security
Systems’ Cable Coatings.
As additional information is developed, it will be forwarded to you for as an addition. Should you desire additional
copies, or should there be questions requiring clarification, please contact offices or your local representative.
Why do cables have to be fire protected?
Electrical cables themselves can be the cause of a fire (short-circuit, electrical overload, arcing). They allow the
rapid spread of flame mainly in vertical cable shafts and can cause secondary fires. The rapid propagation of flame
is the biggest risk in cable fires. Propagation rate is 20metres/ min (66ft/min) in vertical runs, that means 5
storeys/min. Insulating and jacketing of most cables used today consist of plastics; polyvinylchloride (PVC)
contributes by the largest part, but plastics such as polyethylene (PE), polypropylene (PP) and others are used to
lesser extents.
PVC contains chlorine which in fire is emitted as hydrogen chloride. This gas is carried by the air through the entire
building structure reaching parts which are not affected by heat or flames. This hydrogen chloride condensates after
combining with water vapour to produce hydrochloric acid, which is deposited on all surfaces and may cause
severe corrosive damage to metal surfaces, for instance in electrical or electronic installations and cement or
concrete structure.
4. 4 | P a g e
Product Description
FS11
FS11 Cable Coating is an interior water based, intumescent fire protective coating designed to enhance the fire
resistance of electrical power, communication and control cables. It is commonly applied to continuous cable runs
to prevent the propagation of fire. It is designed for labor saving spray applications on cables. With a DFT (Dry Film
Thickness) of 1mm it is one of the lowest in the cable coating market. FS11 will also protect the integrity of the
cable system for up to 90 minutes under IEC 60331-21
FS15
FS15 Cable Coating is an FM Approved, water-based, ablative fireproofing material especially developed for the fire
protection of grouped or bundled electrical cables and penetration seals for interior or exterior applications. FS15
will also protect the integrity of the cable system for up to 90 minutes under IEC 60331-21.
5. 5 | P a g e
Equipment Recommendations
Pumps
1. Graco Airless spray units such as King, Bulldog or similar units under Wiwa brand and for smaller
applications Graco Merkur.
Hoses
• BlueMax II hoses of dimensions 3/8” and ¼” is used to connect the Airless spray pump with the gun. The
hoses are fitted with 1 pc gun filter housing and 1 pc swivel for improved manoeuvrability at the gun.
Spray Guns and Tips
• Application is carried out by the use of a Graco Silver Plus Gun with a two finger trigger which provides the
best gun control while spraying. This gun is fitted with a RAC 5 switch tip 317/325. This tip is fitted with a tip
guard Rack 5 Handtite tip guard.
*For application in difficult to reach areas we use Graco pole gun extensions to create different length pole guns.
You should always have a range of tip sizes on hand at a job site since cable tray and single and grouped cable,
hose length, vertical lift, and job site conditions all impact spray patterns.
6. 6 | P a g e
Spare parts and Accessories
To reduce additional job application start-up or down time expenses due to equipment failure, the
following spare parts and accessories are recommended:
• Sufficient tools in the form of long handled screwdrivers, wrenches, hose clamps, etc. to allow for quick
maintenance checks and repairs in the field.
• Extra 50 ft. section of material hose.
• Spare tips.
• Sufficient supplies of empty pails to allow for cleaning of pump and material hose with water flushing.
• A recommended spare parts kit as published by the pump manufacturer.
• Spare material and air hose connectors (including swivel end connectors).
7. 7 | P a g e
Miscellaneous Equipment
The following items are recommended for use or storage on the project for optimum job production:
• Sufficient cover sheets and tape as well as non-absorbent masking cloths to prevent or minimize overspray
on finished surfaces or equipment.
• Movable scaffolding as required.
• Barrel or drum handling equipment to facilitate moving of pails (if required).
• Thickness measuring gauges to assure adequate wet and dry film thickness.
• Extra brushes for touch up after spray completion.
• Mechanical mixing of FS11 and FS15 is required to assure uniformity of blended ingredients and proper
material viscosity. For best results, use of an air operated motor or electric mixer is recommended.
8. 8 | P a g e
Surface Preparation
• FS11 and FS15 are designed to be applied over suitably prepared and cleaned cable(s).
• A thorough cleaning of cables is not required. However, oil and grease should be removed with dry rags
• (No solvent!).
• Using a broom or vacuum cleaner to remove heavy layers of dust is sufficient.
9. 9 | P a g e
Airless Application
Prior to spraying, FS11 and FS15 must be thoroughly mixed to a "smooth, creamy" consistency.
WARNING!
AIRLESS EQUIPMENT SHOULD ONLY BE USED BY TRAINED AND EXPERIENCED PERSONNEL
Airless spraying Water Based
• A material temperature of +5o
C is recommended for optimal spraying behavior
• If needed thinning with max. 3% of water
• Recommended operating pressure: 200 - 250 bar
• Recommended tip sizes: 0.023" – 0.027"
• Approx. 1.4 mm wet = 1.00 mm dry = approx. 1.8 kg/m2
• Tip extensions with swivel ends can be used to reach inaccessible areas.
Brushing
• Brushing with standard or long-bristled brushes for touch up only.
Drying Time
At 20
o
C object temperature and 65% relative humidity at least 24 hours between each coat.
o Dust dry: approx. 3 hours
o Touch dry: approx. 6 hours
o Full cure: approx. 24 hours
• Lower temperatures, higher relative humidity, insufficient air movement and different fire protection coating
thicknesses can prolong drying time.
10. 10 | P a g e
Down Time and Clean Up
When stopping work for a break, immerse the tip of the gun in water and cover the open drum to prevent the
material from hardening. This will permit quick resumption of work without the need to clean the equipment.
When stopping work overnight or longer, as well as when the job is completed, place the pump equipment in a
container of water. Clean the pump of residual coating material using a brush or rag. Activate pump in order to
cycle water, directing the material hose back into the can. When the pump and material hose are thoroughly clean
cycle clean water through the pump to help prevent rusting. Disconnect the material line and remove the gun for
hand cleaning.
11. 11 | P a g e
Important Application Procedures
Cold Weather Application: FS11 and FS15 cannot be applied, below 5o
C.
Also the following important points should be noted:
• FS11 and FS15 MUST be stored free from frost- preferably at a minimum of +5o
C to a maximum of
+30
o
C