Fire Security Systems, we supply several Firestopping products dependent on regional applications. We supply the Fire Security Systems Range, specializing in EN and BS476 approvals.

1. Excellence in Technology
FIRE SECURITY SYSTEMS
Wood Fire Protection
1 KS & 2 KS
Thin-film intumescent coatings for Timber
(wood) surfaces

2. DESCRIPTION
Hensotherm 1 and 2 KS, are wood (timber)
coatings applied to the surface to stop flame
spread.
1 KS is a transparent intumescent fire
protection coating. The natural surface of
the wooden materials remains visible. 1 KS is
an environmentally friendly building material
according to LEED valuation.
2 KS Outdoor protects wooden building components outside.
2 KS Indoor is designed for interior use on
wooden materials. In combination with top
coat HENSOTOP both coatings are good for
accents of creative colour.
1 and 2 KS are normally spray applied and
are classified according to European Standard, SBI-Test DIN EN13501-1
WHERE TO USE 1 & 2 KS
1 & 2 KS can be applied in residential, commercial and industrial construction where
you would like to have a highly decorative
finish while continuing to use your timber.
Why Use 1 & 2 KS?
Fire Protection with Aesthetic Appeal for wood.
1 & 2 KS has been designed to allow fire protection of
wood without compromising aesthetic appeal or functionality:
- Complete primer, fireproofing and topcoat solution,
- Applied as a thin layer that does not compromise intricate designs and shapes created by timber,
- Easy over coating with a wide range of coloured (RAL)
finishes.

3. TYPICAL APPLICATIONS
REQUIRED DATA
Product
Spread of Flame Approval
1 KS
2 KS
SBI-Test DIN EN13501-1
SBI-Test DIN EN13501-1
Approvals
SBI-Test DIN EN13501-1 - Spread of Flame
Transport / Storage
- Transport and store free from frost- preferably at a
minimum of +5oC to a maximum of +30oC.
- shelf-life of unopened pails: 12 month from date of
manufacture.
- Opened pails must be re-sealed.
Packaging
- 12.5 and 25 kg net weight
- Plastic pails
- Other sizes on request
Surface Preparation
Please refer to the Technical Data Sheet
Application
Please refer to the Technical Data Sheet
Drying Time
Please refer to the Technical Data Sheet
Top Coats
Please refer to the Technical Data Sheet
Safety and the Environment
Please refer to the Technical Data Sheet
Provides intumescent fire protection to w
wood
structures and materials while maintaining
architectural aesthetics for commercial infrastructure assets including:
-
Homes
Airports
Stadiums and Leisure Facilities
Office Buildings
Retail Complexes
Cinemas
Residential low and Highrise Apartments
Atriums

4. FIRE SECURITY SYSTEMS
Canada:
PO Box 21096, Coquitlam BC V3E 3P9 Canada
Tel:+1 604 941 1001 Fax: +1 604 648 9311
mail@fire-security.net
Norway :
Skibåsen 20b -4636 Kristiansand Norway
Tel:+ 47 95 47 80 00 Fax: +47 38 02 15 31
norway@fire-security.net
UAE :
PO Box 40068
Ajman - United Arab Emirates
Tel: +971 6 7478842 Fax: +971 6 7478843
UAE@fire-security.net
www.Fire-Security.net
Disclaimer: The above data, particularly the recommendations for the application and use of Fire Security products are based on the manufacturer's
knowledge and experience. Due to different materials and conditions of application, which are beyond our control, we recommend in any case to carry
out sufficient tests in order to ensure that Fire Security products are suitable for the intended purpose and applications. Therefore, any liability for such
recommendations or any oral advice is expressly excluded unless we have acted willfully or by gross negligence. It is always the responsibility of the
installer / purchaser to guarantee correct preparation, DFT (Fire Security Coatings) and thickness (Fire Security Firestop Products) of all Fire Security
products. Fire Security Systems is not liable for installation or faulty installation. It is always the responsibility of the installer / purchaser to guarantee
and certify the installation of materials.
Manufactured by Rudolf Hensel GmbH, Germany