Fingerprint recognition is one of the methods used in biometric system. Most of the biometric systems which are used for human identification or person’s identification. In this paper we are discussing minutiae matching and discrete wavelet transform and comparison of these two in fingerprint recognition. In this paper, firstly it uses fingerprint identification and performance in terms of equal error rate and then by calculating using discrete wavelet transform. The main aim of this paper is to create performing and accurate program for fingerprint identification.
Experimental study of minutiae based algorithm for fingerprint matchingcsandit
In this paper, a minutiae-based algorithm for fingerprint pattern recognition and matching is
proposed. The algorithm uses the distance between the minutiae and core points to determine
the pattern matching scores for fingerprint images. Experiments were conducted using
FVC2002 fingerprint database comprising four datasets of images of different sources and
qualities. False Match Rate (FMR), False Non-Match Rate (FNMR) and the Average Matching
Time (AMT) were the statistics generated for testing and measuring the performance of the
proposed algorithm. The comparative analysis of the proposed algorithm and some existing
minutiae based algorithms was carried out as well. The findings from the experimental study
were presented, interpreted and some conclusions were drawn.
This presentation describes what could be the good features, and the methods to verify a person from his hand. This uses
"Raul Sanchez-Reillo, C. Sanchez-Avila, A. Gonzalez-Marcos, Biometric identification through hand geometry measurements, IEEE Transactions on PAMI 22 (2000)" as the base.
Experimental study of minutiae based algorithm for fingerprint matchingcsandit
In this paper, a minutiae-based algorithm for fingerprint pattern recognition and matching is
proposed. The algorithm uses the distance between the minutiae and core points to determine
the pattern matching scores for fingerprint images. Experiments were conducted using
FVC2002 fingerprint database comprising four datasets of images of different sources and
qualities. False Match Rate (FMR), False Non-Match Rate (FNMR) and the Average Matching
Time (AMT) were the statistics generated for testing and measuring the performance of the
proposed algorithm. The comparative analysis of the proposed algorithm and some existing
minutiae based algorithms was carried out as well. The findings from the experimental study
were presented, interpreted and some conclusions were drawn.
This presentation describes what could be the good features, and the methods to verify a person from his hand. This uses
"Raul Sanchez-Reillo, C. Sanchez-Avila, A. Gonzalez-Marcos, Biometric identification through hand geometry measurements, IEEE Transactions on PAMI 22 (2000)" as the base.
The process of matching fingerprints is carried out based on the minutiae features found in a fingerprint. Two cases are considered in matching: 1. One to One matching, 2. One to Many matching
novel method of identifying fingerprint using minutiae matching in biometric ...INFOGAIN PUBLICATION
Fingerprint is one of the best apparatus to identify human because of its uniqueness, details information, hard to change and long-term indicators of human identity where there are several biometric feature that can be recycled to endorse the individuality. Identification of fingerprint is very important in forensic science, trace any part of human, collection of crime part and proof from a crime. This paper presents a new method of identifying fingerprint in biometrics security system. Fingerprint is one of the best example in biometric security because it can identify personal information and it is much secure than any other biometric identification system. The experimental result exhibits the performance of the proposed method.
Biometric system works on behavioral and physiological biometric parameters to spot a person. Every fingerprint contains distinctive options and its recognizing system primarily works on native ridge feature local ridge endings, minutiae, core point, delta, etc. However, fingerprint pictures have poor quality thanks to variations in skin and impression conditions. In personal identification, fingerprint recognition is taken into account the foremost outstanding and reliable technique for matching with keep fingerprints within the information. Minutiae extraction is additional essential step in fingerprint matching. This paper provides plan regarding numerous feature extraction and matching algorithms for fingerprint recognition systems and to seek out that technique is additional reliable and secure.
Reduction of False Acceptance Rate Using Cross Validation for Fingerprint Rec...IJTET Journal
Abstract— In the field of biometric modality fingerprint is considered to be one of the most widely used method for individual identity. The fingerprint authentication is used in most application for security purpose. In the biometric systems, the input images are binarized and feature is extraction. The Minutiae matching in fingerprint identification is done by identifying the minutiae point of interest and their relationship. The validation testing in the proposed system using the method of K- fold cross validation by using two , a training set and test set of images to find the appropriate image that matches the input image ,increase the accuracy of recognition by reducing the false acceptance rate of the system.
Latent fingerprint and vein matching using ridge feature identificationeSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
An Efficient Approach to Extract Singular Points for Fingerprint RecognitionMesbah Uddin Khan
Many approaches have been proposed for developing fingerprint recognition systems. Some of them give inaccurate results due to low-quality images or have high time cost. The presentation focuses on singular points extraction from low quality image and then matching fingerprint within low time cost.
Developmentof Image Enhancement and the Feature Extraction Techniques on Rura...IOSR Journals
Abstract: Fingerprint recognition is one of the most popular and successful methods used for person
identification which takes advantage of the fact that the fingerprint has some unique characteristics called
minutiae which are points where a extracts the ridges and bifurcation from a fingerprint image. A critical step in
studying the statistics of fingerprint minutiae is to reliably extract minutiae from the fingerprint images.
However fingerprint images are rarely of perfect quality. Fingerprint image enhancement techniques are
employed prior to minutiae extraction to obtain a more reliable estimation of minutiae locations.
Fingerprint matching is often affected by the presence of intrinsically low quality fingerprints and various
distortions introduced during the acquisition process. In this paper we have used the rural fingerprints
database which is collected from IIIT Delhi research lab which consists of 1634 fingerprints images. Out of
which we have preprocess 600 sample preprocessing extracts the ridges and bifurcation from a fingerprint
image and tried to improve the quality of images. The Resultant images quality is verified by using different
quality measures.
Keywords: minutiae extraction, extracts the ridges and bifurcation, rural fingerprint authentication.
MDD Project Report By Dharmendra singh [Srm University] Ncr DelhiDharmendrasingh417
In this modern era, a huge revolution in technology is the introduction of biometric recognition system. One of the most useful biometric recognition system is fingerprint recognition system. The fingerprint recognition system is considered to most important biometric system in addition to other biometrics recognition systems
Detecting and Improving Distorted Fingerprints using rectification techniques.sandipan paul
In this detection and improving distorted fingerprint using rectification techniques like SVM, PCA classifier etc.
In this ppt a distorted fingerprint is taken and improve that distorted fingerprint into normal one.
The process of matching fingerprints is carried out based on the minutiae features found in a fingerprint. Two cases are considered in matching: 1. One to One matching, 2. One to Many matching
novel method of identifying fingerprint using minutiae matching in biometric ...INFOGAIN PUBLICATION
Fingerprint is one of the best apparatus to identify human because of its uniqueness, details information, hard to change and long-term indicators of human identity where there are several biometric feature that can be recycled to endorse the individuality. Identification of fingerprint is very important in forensic science, trace any part of human, collection of crime part and proof from a crime. This paper presents a new method of identifying fingerprint in biometrics security system. Fingerprint is one of the best example in biometric security because it can identify personal information and it is much secure than any other biometric identification system. The experimental result exhibits the performance of the proposed method.
Biometric system works on behavioral and physiological biometric parameters to spot a person. Every fingerprint contains distinctive options and its recognizing system primarily works on native ridge feature local ridge endings, minutiae, core point, delta, etc. However, fingerprint pictures have poor quality thanks to variations in skin and impression conditions. In personal identification, fingerprint recognition is taken into account the foremost outstanding and reliable technique for matching with keep fingerprints within the information. Minutiae extraction is additional essential step in fingerprint matching. This paper provides plan regarding numerous feature extraction and matching algorithms for fingerprint recognition systems and to seek out that technique is additional reliable and secure.
Reduction of False Acceptance Rate Using Cross Validation for Fingerprint Rec...IJTET Journal
Abstract— In the field of biometric modality fingerprint is considered to be one of the most widely used method for individual identity. The fingerprint authentication is used in most application for security purpose. In the biometric systems, the input images are binarized and feature is extraction. The Minutiae matching in fingerprint identification is done by identifying the minutiae point of interest and their relationship. The validation testing in the proposed system using the method of K- fold cross validation by using two , a training set and test set of images to find the appropriate image that matches the input image ,increase the accuracy of recognition by reducing the false acceptance rate of the system.
Latent fingerprint and vein matching using ridge feature identificationeSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
An Efficient Approach to Extract Singular Points for Fingerprint RecognitionMesbah Uddin Khan
Many approaches have been proposed for developing fingerprint recognition systems. Some of them give inaccurate results due to low-quality images or have high time cost. The presentation focuses on singular points extraction from low quality image and then matching fingerprint within low time cost.
Developmentof Image Enhancement and the Feature Extraction Techniques on Rura...IOSR Journals
Abstract: Fingerprint recognition is one of the most popular and successful methods used for person
identification which takes advantage of the fact that the fingerprint has some unique characteristics called
minutiae which are points where a extracts the ridges and bifurcation from a fingerprint image. A critical step in
studying the statistics of fingerprint minutiae is to reliably extract minutiae from the fingerprint images.
However fingerprint images are rarely of perfect quality. Fingerprint image enhancement techniques are
employed prior to minutiae extraction to obtain a more reliable estimation of minutiae locations.
Fingerprint matching is often affected by the presence of intrinsically low quality fingerprints and various
distortions introduced during the acquisition process. In this paper we have used the rural fingerprints
database which is collected from IIIT Delhi research lab which consists of 1634 fingerprints images. Out of
which we have preprocess 600 sample preprocessing extracts the ridges and bifurcation from a fingerprint
image and tried to improve the quality of images. The Resultant images quality is verified by using different
quality measures.
Keywords: minutiae extraction, extracts the ridges and bifurcation, rural fingerprint authentication.
MDD Project Report By Dharmendra singh [Srm University] Ncr DelhiDharmendrasingh417
In this modern era, a huge revolution in technology is the introduction of biometric recognition system. One of the most useful biometric recognition system is fingerprint recognition system. The fingerprint recognition system is considered to most important biometric system in addition to other biometrics recognition systems
Detecting and Improving Distorted Fingerprints using rectification techniques.sandipan paul
In this detection and improving distorted fingerprint using rectification techniques like SVM, PCA classifier etc.
In this ppt a distorted fingerprint is taken and improve that distorted fingerprint into normal one.
A fingerprint is an impression of the friction ridges on all parts of the finger. A friction ridge is a raised portion of the epidermis on the palmar (palm) or digits (fingers and toes) or plantar (sole) skin, consisting of one or more connected ridge units of friction ridge skin. These are sometimes known as "epidermal ridges" which are caused by the underlying interface between the dermal papillae of the dermis and the interpapillary (rete) pegs of the epidermis. These epidermal ridges serve to amplify vibrations triggered when fingertips brush across an uneven surface, better transmitting the signals to sensory nerves involved in fine texture perception. The ridges do not assist in gripping objects, sometimes in fact reducing grip to as much as 30% compared to completely smooth fingerpads.
Fingerprints are imprints formed by friction
ridges of the skin and thumbs. They have long been used for
identification because of their immutability and individuality.
Immutability refers to the permanent and unchanging character
of the pattern on each finger. Individuality refers to the
uniqueness of ridge details across individuals; the probability
that two fingerprints are alike is about 1 in 1.9x1015. In despite of
this improvement which is adopted by the Federal Bureau of
Investigation (FBI), the fact still is “The larger the fingerprint
files became, the harder it was to identify somebody from their
fingerprints alone. Moreover, the fingerprint requires one of the
largest data templates in the biometric field”. The finger data
template can range anywhere from several hundred bytes to over
1,000 bytes depending upon the level of security that is required
and the method that is used to scan one's fingerprint. For these
reasons this work is motivated to present another way to tackle
the problem that is relies on the properties of Vector
Quantization coding algorithm.
Analysis of Image Fusion Techniques for fingerprint Palmprint Multimodal Biom...IJERA Editor
The multimodal Biometric System using multiple sources of information has been widely recognized. However computational models for multimodal biometrics recognition have only recently received attention. In this paper the fingerprint and palmprint images are chosen and fused together using image fusion methods. The biometric features are subjected to modality extraction. Different fusion methods like average fusion, minimum fusion, maximum fusion, discrete wavelet transform fusion and stationary wavelet transformfusion are implemented for the fusion of extracting modalities. The best fused template is analyzed by applying various fusion metrics. Here the DWT fused image provided better results.
Ijaems apr-2016-1 Multibiometric Authentication System Processed by the Use o...INFOGAIN PUBLICATION
The present day authentication system is mostly uni-model i.e having only single authentication method which can be either finger print, iris , palm veins ,etc. Thus these models have to contend with a variety of problems such as absurd or unusual data, non-versatility; un authorized attempts, and huge amount of error rates. Some of these limitations can be reduced or stopped by the use of multimodal biometric systems that integrate the evidence presented by several sources of information. This paper converses a multi biometric based authentication system based on Fusion algorithm using a key. Our work mainly focuses on the fusion algorithm, i.e fusion of finger and palm print out of which the greatest features from the above two traits are taken into account. With minimum possible features the fusion of the both the traits is carried out. Then some key is generated for multi biometric authentication. By processing the test image of a person, the identity of the person is displayed with his/her own image. By the fusion algorithm, it is found that it has less computation time compared to the existing algorithms. By matching results, we validate and authenticate the particular individual.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Multiple features based fingerprint identification systemeSAT Journals
Abstract Security has become major issue now a day. In order to prevent unauthorized access of confidential data there is a need for accurate and reliable personal identification system. So, biometric based identification system is one of the best solutions. Fingerprint based system is one of oldest biometric identification systems. It is used in many commercial and security applications. Even with advent of technology in fingerprint identification system, the accurate extraction and matching of features from a fingerprint image is a challenging task. The task is much more challenging when fingerprint is affected by non-linear deformations such as rotation and translation. In this paper, fingerprint identification system using improved feature vector based algorithm is presented. In the algorithm Gabor filter is implemented to enhance the fingerprint image. The salient features minutiae (ridge endings) and reference point are extracted from the image. The Euclidian distances between reference point and each minutiae point are calculated and are arranged in ascending order. These are stored in database as feature vectors. The fingerprint matching is done based on the similarity rate between the feature vector of input fingerprint and the feature vectors stored in the database. Algorithms are implemented using Visual Studio 2010 in C++ language using Open CV libraries and tested on the fingerprint database created in the laboratory. Key Words: Fingerprint, Minutiae, Reference point, Euclidian distance, Similarity rate, Identification
Ingerprint based student attendance system with sms alert to parentseSAT Journals
Abstract
This paper is a study of a fingerprint recognition system based on minutiae based fingerprint algorithms used in various techniques. This line of track mainly involves extraction of minutiae points from the model fingerprint images and fingerprint matching based on the number of minutiae pairings among two fingerprints. This paper also provides the design method of fingerprint based student attendance with help of GSM. This system ignores the requirement for stationary materials and personnel for keeping of records.
Keywords – GSM, LCD
FINGERPRINT MATCHING USING HYBRID SHAPE AND ORIENTATION DESCRIPTOR -AN IMPROV...IJCI JOURNAL
Fingerprint recognition is a promising factor for the Biometric Identification and authentication process.
Fingerprints are broadly used for personal identification due to its feasibility, distinctiveness, permanence,
accuracy and acceptability. This paper proposes a way to improve the Equal Error Rate (EER) in
fingerprint matching techniques in the domain of hybrid shape and orientation descriptor. This type of
fingerprint matching domain is popular due to capability of filtering false and strange minutiae pairings.
EER is calculated by using FMR and FNMR to check the performance of proposed technique.
COMPARATIVE ANALYSIS OF MINUTIAE BASED FINGERPRINT MATCHING ALGORITHMSijcsit
Biometric matching involves finding similarity between fingerprint images.The accuracy and speed of the
matching algorithmdetermines its effectives. This researchaims at comparing two types of matching
algorithms namely(a) matching using global orientation features and (b) matching using minutia triangulation.The comparison is done using accuracy, time and number of similar features. The experiment is conducted on a datasets of 100 candidates using four (4) fingerprints from each candidate. The data is sampled from a mass registration conducted by a reputable organization in Kenya.Theresearch reveals that fingerprint matching based on algorithm (b) performs better in speed with an average of 38.32 milliseconds
as compared to matching based on algorithm (a) with an average of 563.76 milliseconds. On accuracy,algorithm(a) performs better with an average accuracy of 0.142433 as compared to algorithm (b) with an average accuracy score of 0.004202.
Detection and rectification of distorted fingerprintsCloudTechnologies
We are the company providing Complete Solution for all Academic Final Year/Semester Student Projects. Our projects are
suitable for B.E (CSE,IT,ECE,EEE), B.Tech (CSE,IT,ECE,EEE),M.Tech (CSE,IT,ECE,EEE) B.sc (IT & CSE), M.sc (IT & CSE),
MCA, and many more..... We are specialized on Java,Dot Net ,PHP & Andirod technologies. Each Project listed comes with
the following deliverable: 1. Project Abstract 2. Complete functional code 3. Complete Project report with diagrams 4.
Database 5. Screen-shots 6. Video File
SERVICE AT CLOUDTECHNOLOGIES
IEEE, WEB, WINDOWS PROJECTS ON DOT NET, JAVA& ANDROID TECHNOLOGIES,EMBEDDED SYSTEMS,MAT LAB,VLSI DESIGN.
ME, M-TECH PAPER PUBLISHING
COLLEGE TRAINING
Thanks&Regards
cloudtechnologies
# 304, Siri Towers,Behind Prime Hospitals
Maitrivanam, Ameerpet.
Contact:-8121953811,8522991105.040-65511811
cloudtechnologiesprojects@gmail.com
http://cloudstechnologies.in/
This paper introduces the implementation of fingerprint matching Minutiae Algorithm for Fingerprint
Matching. These algorithm increases the reliability accuracy of the fingerprint matching. The proposed method was
evaluated by means of experiment conducted on the FVC2002, FVC2004 database. Experimental results confirm
that the taking time of the fingerprint image matching is very less than the other methods. This algorithm is very
effective algorithm for the identification of fingerprint image.
Similar to Fingerprint Recognition Using Minutiae Based and Discrete Wavelet Transform (20)
DEVELOPMENT OF TODDLER FAMILY CADRE TRAINING BASED ON ANDROID APPLICATIONS IN...AM Publications
Toddler family cadre is a community members work voluntarily in fostering and providing information to parents of toddlers about how to properly care for children. Toddler Family cadre desperately need training to increase their skills. There are still a few Toddler family cadres who get training so that the knowledge and skills of parents and other family members in developing toddlers' growth through physical stimulation, motoric intelligence, emotional and social economy as well as possible are still lacking. The purpose of this study is to develop an Android- assisted Toddler family cadre training model in Demak. This research is research in tian research and development. The research location was in Demak Regency. Toddler family cadres became the object of this research. Development of Toddler family cadre training models assisted by Android in Demak is feasible to be used as an effort to improve Toddler Family cadres' capabilities.
TESTING OF COMPOSITE ON DROP-WEIGHT IMPACT TESTING AND DAMAGE IDENTIFICATION ...AM Publications
In recent years the use of composite materials in structural components has become increasingly common in a wide range of engineering applications. Composite materials offer numerous advantages over more conventional materials because of their superior specific properties, but a serious obstacle to a more widespread use of these materials is their high sensitivity to localized impact loading. This paper presents an experimental study to assess the impact response of drop weight impact tests on fiber reinforced polymer composites with deferent load and damage identification of composite using Non-destructive testing techniques ultrasonic testing (UT) C scan. In the study includes checking the strength of the specimen, plotting of graphs between the height and the impact energy obtained and tabulating the results after conducting the various functional tests.
THE USE OF FRACTAL GEOMETRY IN TILING MOTIF DESIGNAM Publications
In this paper I will present the use of fractal geometry to design tile motifs. A fractal is a geometric figure that combines the several characteristics among others: its parts have the same form as the whole, fragmented, and formation by iteration. The concept of fractals has been spread over all fields of sciences, technology, and art. This paper aims to provide an algorithm to creating motifs of tile algorithm for create the tile motif consists of base, iteration, coloration and duplication. In order to help the reader better understand the algorithm, I will present some script using Matlab. We describe a mathematically based algorithm that can fill a spatial region with sequence of randomly placed which may be transformed copies of one motif or several motifs. By using this algorithm, I can produce thousand variety of aesthetically pleasing tile motifs, of which we show a number of examples.
TWO-DIMENSIONAL INVERSION FINITE ELEMENT MODELING OF MAGNETOTELLURIC DATA: CA...AM Publications
Two-dimensional resistivity analysis of magnetotelluric data has been done at “Z” geothermal area which is located in southern part of Indonesia. The objective is to understand subsurface structure beneath reasearch area based on 2-D modeling of magnetotelluric data. The inversion finite element method were used for numerical simulations which requires discretization on the boundary of the modeling domain. The modeling results of magnetotelluric data shows relativity structure dissemination: 0-10 ohm.m in a thickness of 1 km (Clay Cap), 10-100 ohm.m with 1-2 km depth respectively (reservoir zone), and on a scale of 100-1000 ohm.m in a depth of 2-3 km (heat source zone). The result of relativity structure can be used to delineate an area with geothermal prospect around 12 km2.
USING THE GENETIC ALGORITHM TO OPTIMIZE LASER WELDING PARAMETERS FOR MARTENSI...AM Publications
To achieve the pre-set welding size, this paper presents the optimization of the constrained overlap laser welding input parameters for AISI 416 and AISI 440FSe stainless, thickness 0.5 mm. In this study, the proposed optimization algorithm is the Genetic Algorithm (GA). After training 10 times for 30 NP (population size), each training repeated 200 times, the results achieved as expected. The error is compared with the result of the affirmation experiment not exceeding 5%.
ANALYSIS AND DESIGN E-MARKETPLACE FOR MICRO, SMALL AND MEDIUM ENTERPRISESAM Publications
The Ministry of Cooperatives and Small and Medium Enterprises launched in 2018 the number of Micro, Small and Medium Enterprises (MSMEs) in Indonesia as many as 58.97 million people. It is predicted that the number of MSMEs players in 2019 will amount to 59.2 million. This shows that the Indonesian people have made changes in the field of family economics which initially as consumptive are now productive. The community prefers to carry out activities that can increase family income. Future MSMEs remain the mainstay of the national economy. In accordance with the government roadmap, in 2020 e-commerce transactions are predicted to reach Rp1,300 trillion or equivalent to USD130 billion. According to data from the Central Statistics Agency (BPS), the contribution of MSMEs to Indonesia's Gross Domestic Product (GDP) reached 61.41%, with the number of MSMEs reaching almost 60 million units. However, only around 8% or 3.79 million of the 59.2 million MSMEs players have used online platforms to market their products. Based on the above problems, researchers conducted research on the analysis and display of E-Marketplace for MSMEs in Indonesia. The type of research used is action research. The object of research is MSMEs which are under the Office of Industry and Trade of Sragen Regency. The method of data collection is by techniques: (1) interview, (2) documentation (3) observation, (4) literature study. The researcher uses the waterfall method in developing the system. The research team has successfully analyzed the E-Market place according to the results of data collection. The research team has succeeded in designing the E-Marketplace for MSMEs. E-Marketplace designed can be used by admin, MSME and user. Admin is in charge of managing E-Marketplace and has full access rights. MSMEs can register online and manage their products in E-Marketplace. Users or buyers can search data in E-Marketplace as desired. To make transactions, users can interact directly with MSMEs according to the data provided in E-Marketplace. E-Marketplace can be used for marketing together MSMEs products. This e-marketplace can be accessed at www.umkmonline.com
REMOTE SENSING AND GEOGRAPHIC INFORMATION SYSTEMS AM Publications
Remote sensing technology's increasing accessibility helps us observe research and learn about our globe in ways we could only imagine a generation ago. Guides to profound knowledge of historical, conceptual and practical uses of remote sensing which is increasing GIS technology. This paper will go briefly through remote sensing benefits, history, technology and the GIS and remote sensing integration and their applications. Remote sensing (RS) is used in mapping the predicted and actual species and dominates the ecosystem canopy.
EVALUATE THE STRAIN ENERGY ERROR FOR THE LASER WELD BY THE H-REFINEMENT OF TH...AM Publications
Currently, the finite element method (FEM) is still one of the useful tools in numerical simulation for technical problems. With this method, a continuum model presented by a certain number of elements with a simple approximation field causes the presence of discretization error in solutions. This paper considers the butt weld by laser which subjected the tension for AISI 1018 steel highness 8 mm. The aim of the study is to use the h-refinement of the FEM in estimation the strain energy error for the laser weld mentioned. The results show that the stability of the h-refinement shown by the value of the relative error of the strain energy is quite small, specifically; FEM is less than 5.7% and extra is no more than 3.7%.
HMM APPLICATION IN ISOLATED WORD SPEECH RECOGNITIONAM Publications
Speech recognition is always being an all-time trendy topic for discussion and also for researches and we see a major application in our life. This paper provides the work done on the application of Hidden Markov model to implement isolated word speech recognition on MATLAB and to develop and train the system for set of self-selective words for specific user (user dependent) to get maximum efficiency in word recognition system. Which uses the forward and Baum-welch algorithm and fitting Gaussian of the Baum-welch algorithm for all the iteration perform. We use a sample of 7 alphabets which are recorded in 15 different ways giving total of 105 word to use for training with each word with 15 variations. This system can be used in real world in system security using voice security system and mainly for children and impaired people.
PEDESTRIAN DETECTION IN LOW RESOLUTION VIDEOS USING A MULTI-FRAME HOG-BASED D...AM Publications
Detecting pedestrians in low resolution videos is a challenging task, due to the small size of pedestrians in the images and the limited information. In practical outdoor surveillance scenarios the pedestrian size is usually small. Existing state-of-the-art pedestrian detection methods that use histogram of oriented gradient (HOG) features have poor performance in this problem domain. To compensate for the lack of information in a single frame, we propose a novel detection method that recognizes pedestrians in a short sequence of frames. Namely, we take the single-frame HOG-based detector and extend it to multiple frames. Our detector is applied to regions containing potential moving objects. In the case of video taken from a moving camera on an aerial platform, video stabilization is first performed to register the frames. A classifier is then applied to features extracted from spatio-temporal volumes surrounding the potential moving objects. On challenging stationary and aerial video datasets, our detection accuracy outperforms several state-of-the-art algorithms.
The aim of this paper is to help the blind people to identify and catch the public transport vehicles with the help of Light Fidelity technology. It is a Navigation aid. When the bus arrives at the bus stand, transmitter in the bus transmits the light signals and receiver in the stick, receives the light signals and a sound signal is generated through the speaker present in the stick. The sound message contains the bus number and the destination of the bus. In addition to this, if the person is absconded or lost, details of the location will be sent to his/her family members by pressing a button. This is made possible with the help of Global System for Mobile (GSM). Finally, presence of water can be detected along the blind person’s path, with the help of water sensors.
EFFECT OF SILICON - RUBBER (SR) SHEETS AS AN ALTERNATIVE FILTER ON HIGH AND L...AM Publications
A digital radiography delivers a radiation dose to patients; therefore it poses potential risk to the patients. One effort to reduce dose is carried out using a radiation filter, e.g. Silicone Rubber (SR) sheet. The purpose of this research was to determine the impact of the SR sheet on the high contrast objects (HCO) and the low contrast objects (LCO). The dose reduction was determined from attenuation x-rays before and after using the SR sheet. Assessment of HCO and LCO was observed from CDR TOR phantom at tube voltage of 48 kVp and tube current of 8 mAs. The physical parameter to assess image quality was the Signal to Noise Ratio (SNR) value in LCO. The maximum x-ray attenuation using the SR sheet is 48.82%. The visibility of the HCO remains the same, namely 16 objects; however the LCO slighly decreases from 14 objects to 13 objects after using the SR sheet. The SNR value decreases with an average value of 15.17%.Therefore, the SR sheet as a alternative filter has no effect on the HCO and has realtively little effect on the LCO. Thus, the SR sheet potentially is used for radiation protection in patients, especially on examinations that do not require low contrast resolution.
UTILIZATION OF IMMUNIZATION SERVICES AMONG CHILDREN UNDER FIVE YEARS OF AGE I...AM Publications
Immunization is the key strategy to curb communicable diseases which are the number one killer of children under five. Immunization prevents mortalities of approximating three million children under five annually. This study aimed to assess utilization of immunization services among children under five of age in Kirinyaga County, Kenya.
REPRESENTATION OF THE BLOCK DATA ENCRYPTION ALGORITHM IN AN ANALYTICAL FORM F...AM Publications
The article presents the study of cryptographic transformations of the Kuznyechik algorithm in relation to differential analysis and the translation of their representations into a more convenient form for cryptanalysis. A simplification of the type of transformations of the algorithm to algebraic the form, in which cryptanalysis software will be more effective. Since the description of the algorithm in the analytical form allows for 16 cycles of execution of the shift register with linear feedback, each of which will be carried out 16 operations of multiplication and 15 operations of addition, reduced to 16 multiplying and 15 the operations of addition. The result is an algebraic form of a linear transformation (from a shift register with linear feedback to the multiplication of the matrix in a finite field). In the future, the algebraic type of transformation can be used to effectively carry out differential cryptanalysis.
Optical character recognition (OCR) is process of classification of optical patterns contained in a digital image. The process of OCR Recognition involves several steps including pre-processing, segmentation, feature extraction, classification. Pre-processing is for done the basic operation on input image like noise reduction which remove the noisy signal from image. Segmentation stage for segment the given image into line by line and segment each character from segmented line. Future extraction calculates the characteristics of character. A Radial Basis Function Neural Network (RBFNN) is used to classification contains the database and does the comparison.
Surveillance refers to the task of observing a scene, often for lengthy periods in search of particular objects or particular behaviour. This task has many applications, foremost among them is security (monitoring for undesirable behaviour such as theft or vandalism), but increasing numbers of others in areas such as agriculture also exist. Historically, closed circuit TV (CCTV) surveillance has been mundane and labour Intensive, involving personnel scanning multiple screens, but the advent of reasonably priced fast hardware means that automatic surveillance is becoming a realistic task to attempt in real time. Several attempts at this are underway.
SIMULATION OF ATMOSPHERIC POLLUTANTS DISPERSION IN AN URBAN ENVIRONMENTAM Publications
Interest in air pollution investigation of urban environment due to existence of industrial and commercial activities along with vehicular emission and existence of buildings and streets which setup natural barrier for pollutant dispersion in the urban environment has increased. The air pollution modelling is a multidisciplinary subject when the entire cities are taken under consideration where urban planning and geometries are complex which needs a large software packages to be developed like Operational Street Pollution Model (OSPM), California Line Source model (CALINE series) etc. On overviewing various works it can be summarized that the air pollutant dispersion in urban street canyons and all linked phenomenon such as wind flow, pollutant concentrations, temperature distribution etc. generally depend on wind speed and direction, building heights and density, road width, source and intensity of air pollution, meteorological variables like temperature, humidity etc. A unique and surprising case is observed every time on numerous combinations of these factors. The main aim of this study is to simulate the atmospheric pollutant dispersion for given pollutant like carbon monoxide, sulphur dioxide and nitrogen dioxide and given atmospheric conditions like wind speed and direction. Computational Fluid Dynamics (CFD) simulation for analysing the atmospheric pollutant dispersion is done after natural airflow analysis. Volume rendering is done for variables such as phase 2 volume fraction and velocity with resolution as 250 pixels per inch and transparency as 20%. It can be observed that all the three pollutant namely nitrogen dioxide, sulphur dioxide and carbon monoxide the phase 2 volume fraction changes from 0 to 1. The wind velocity changes from 3.395×10-13 m/s to 1.692×102 m/s. The dispersion of pollutants follow the sequence Sulphur dioxide>Carbon monoxide>Nitrogen dioxide.
PREPARATION AND EVALUATION OF WOOL KERATIN BASED CHITOSAN NANOFIBERS FOR AIR ...AM Publications
In this article, we have extracted keratin from deccani wool waste and prepared the wool keratin based Chitosan nanofibers by electrospinning technique. The prepared nanofibers mat were prepared with different weight percent ratio like 1wt.%, 3wt.% and 5wt.% with respect to polymer i.e Chitosan. The physicochemical and filtration properties of wool keratin based Chitosan nanofibers were studied. Wool keratin based Chitosan nanofibers were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), differential scanning calorimetry (DSC) and scanning electron microscopy (FESEM). The filtration efficiency of keratin Chitosan nanofibers were investigated through DOP test and heavy metal removal capacity of evaluated through Atomic absorption spectroscopy. FTIR results were showed that Keratin gets compatible with Chitosan. XRD patterns revealed keratin was in crystalline nature and increase the crystalline nature of Chitosan nanofibers. FESEM images showed that uniform nanofibers generation with average fiber diameter 80nm. Nanofibers filtration efficiency against a particulate matter in air was obtained more than 99.53% and excellent property of removal of heavy metal.
ANALYSIS ON LOAD BALANCING ALGORITHMS IMPLEMENTATION ON CLOUD COMPUTING ENVIR...AM Publications
Cloud computing means storing and accessing data and programs over the Internet instead of your computer's hard drive. The cloud is just a metaphor for the Internet. The elements involved in cloud computing are clients, data center and distributed server. One of the main problems in cloud computing is load balancing. Balancing the load means to distribute the workload among several nodes evenly so that no single node will be overloaded. Load can be of any type that is it can be CPU load, memory capacity or network load. In this paper we presented an architecture of load balancing and algorithm which will further improve the load balancing problem by minimizing the response time. In this paper, we have proposed the enhanced version of existing regulated load balancing approach for cloud computing by comping the Randomization and greedy load balancing algorithm. To check the performance of proposed approach, we have used the cloud analyst simulator (Cloud Analyst). Through simulation analysis, it has been found that proposed improved version of regulated load balancing approach has shown better performance in terms of cost, response time and data processing time.
A MODEL BASED APPROACH FOR IMPLEMENTING WLAN SECURITY AM Publications
This paper presents various security features and configurations commonly implemented in WLANs and their aggregated security levels and then proposes a model that enables implementation and evaluation of WLAN security
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.