The document provides a comprehensive list of final year project ideas for electrical and electronics engineering students, emphasizing the importance of selecting a relevant and impactful project. It details project summaries, methodologies, and expected outcomes, encouraging students to implement novel research concepts. Additionally, it categorizes projects based on specializations and includes examples of simulation-based projects.

1. EE Power School
You are here: Home / FYP / Final Year Project Ideas for Electrical Engineering Students
Final Year Project Ideas for Electrical
Engineering Students
June 30, 2018 by Muhammad Sarwar — Leave a Comment
Final year project is the ultimate achievement of an electrical engineering graduate. The idea
of a final year project is to practically implement the technical and professional skills learned.
Graduates work on different final year project ideas. The title of an FYP should be novel and
the project must have a positive impact on the society. Many students choose their FYP topic
in a haste, and at the end of completion, it’s no good for them. So, choose your final year
project wisely and give a lot of thinking while choosing final year project ideas for your
electrical engineering degree.
This post gives a complete list of final year project ideas for electrical engineering students. A
short summary (or synopsis) of the project has also been given to get the complete
understanding of the project. The summary contains a short introduction, methodology and
project outcomes.
Undergraduate students of BSEE are encouraged to pick a topic that would implement a novel
research idea. Though, only simulations can also be used instead of a design project. Various
simulation softwares are available to implement the FYP e.g, Matlab/Simulink, Power World
Simulator, ETAP, Digsilent PowerFactory, PSCAD etc.
The list has been categorized into two sections based on a graduate’s specialization.
Final Year Project Ideas for Electrical Engineers
Final Year Project Ideas for Electronics Engineers
HOME CATEGORIES CONTACT ABOUT WRITE FOR US SITEMAP
PRIVACY POLICY

2. Final Year Project Ideas for Electrical
Engineers:
Selection of Suitable Type and Place of a Fault Current
Limiter in a Power Network with embedded DG
The generation of power from Distributed Generation (DG) is increasing day by day as this
technology is not only becoming cheaper relative to other resources but is also
environmentally friendly. However, DG can also have an adverse impact on the operation of the
existing power grid. For example, issues related to power system (PS) stability, PS quality and
protection coordination can occur due to the connection of DG to the grid. Fault current
limiters (FCL) are employed to reduce the negative impacts of DG in power networks. The
purpose of this project is to investigate the impact of a fault current limiter on the fault current
level, losses and stability of a power network with DG connection. The research will also focus
on finding the suitable type and location of an FCL for fault current reduction and increasing
the system stability in the presence of DG.
Integration of Distributed Generation into a
distribution Network: Protection Coordination
Aspects
The generation of power from Distributed Generation (DG) is increasing day by day as this
technology is not only becoming cheaper relative to other resources but is also
environmentally friendly. However, DG can also have an adverse impact on the operation of an
existing power network. For example, issues related to power system (PS) stability, power
quality and protection coordination can occur due to the connection of DG to the grid. The
project will focus on analyzing the impact of DG on protection coordination of a conventional

3. distribution network (DN). After identifying the protection coordination issues, potential
solutions will be suggested to restore protection coordination in presence of DG.
Design & Control of FACTS devices for
improvement in grid stability
An electrical power system is a large interconnected system, which requires a careful design in
order for continuous electric supply to consumers. FACTS (Flexible AC Transmission System)
contains devices which are used to enhance power system reliability & stability. STATCOM
(Static Compensator) is one of the FACTS devices used for such purposes.
This project discusses the impact of FACTS devices on power transmission system reliability
and stability. And depicts how such devices makes voltage profile better and reduce
transmission losses by reactive power compensation.
Implementation and Evaluation of a proposed
switching-tapped-primary Multilevel Inverter
(STPMLI)
Multilevel inverters have gained a huge importance in power systems, particularly, for
distributed generation. Our students have also been working on multilevel inverters for two
years. A few issues were identified in the most popular Cascaded Multilevel Inverter (CMLI)
designs and a novel design was proposed. Our proposed design uses a transformer with
tapped primary winding and different tapping are power (one at a time) in such a way that we
get a stepped sinewave at the output. The proposed idea was simulated and implemented in a
crude form for a 5 level inverter. This work has shown significant potential in this new topology
with several benefits over CMLIs such as it requires a single DC source. This proposed
topology needs further developments and evaluation which is the focus of this project.
Implementation of Protection coordination
schemes using various protective relays
Various faults occur in power system equipment at all time. Protecting against these faults is a
vital job for the proper functioning of the power system.
This project will elaborate on the importance of difference protective relays and their function
to protect power system equipment.
The project will consist of two phases:
1. Simulation phase
2. Experimental phase
In simulation phase, simulations of a practical system will be performed in a suitable software
and results will be validated based on practical data available. For experimental phase, a
simple scheme will be implemented by using the protection, distribution & transmission
modules available in the lab. The results obtained by this experimental scheme will also be
backed by simulations.
Implementation of a power microgrid with
smart switching in a laboratory environment
The microgrid comprising of different power sources i.e solar, wind and diesel generator along
with a variable load will be implemented in PS & SG lab.The synchronized operation of these
power sources under load changes will be investigated. Moreover, smart switching of the load

4. from one bus to the other, depending upon the load requirements, to ensure microgrid stable
operation will also be focused.
Real-time performance-evaluation & control
of Solar Power Plant through SCADA system
The project focuses on practical implementation of Grid-connected solar power plant and its
analyses using modules available in Power Systems & Smart Grid Lab.
The project objectives include:
• Simulation of the given system in Matlab/Simulink according to the specification of modules
• Interfacing of modules with LabVIEW to implement customized Measurement & Control
interface through SCADA.
• Predicting power output of solar modules based on emulated weather conditions
• Analyzing the impact of transmission lines on Solar Plant performance
• Studying the effect of transmission line faults on Grid converter performance
Final Year Project Ideas for Electronics
Engineers:
Vision-based drowsiness detector for Real
Driving Conditions
A non-intrusive approach for drowsiness detection, based on computer vision. It would be
installed in a car and it is able to work under real operation conditions. An IR camera is placed
in front of the driver, in the dashboard, in order to detect his face and obtain drowsiness clues
from their eyes closure. It works in a robust and automatic way, without prior calibration. The
presented system is composed of 3 stages.
The first one is pre-processing, which includes face and eye detection and normalization. The
second stage performs pupil position detection and characterization, combining it with an
adaptive lighting filtering to make the system capable of dealing with outdoor illumination
conditions. The final stage computes PERcentage of eye CLOSure PERCLOS
from eyes closure information.
Implementation of Real-time H264 video
encoder on FPGA
Digital video techniques have been used for a number of years, for example in the television
broadcasting industry. However, until recently a number of factors have prevented the
widespread use of digital video. An analog video signal typically occupies a bandwidth of a few
megahertz.However, when it is converted into digital form, at an equivalent quality, the digital
version typically has a bit rate well over 100 Mbps. This bit rate is too high for most networks
or processors to handle. Therefore, the digital video information has to be
compressed before it can be stored or transmitted Over the last couple of decades, digital
video compression techniques have been constantly improving. Many international standards
that specialize in different digital video applications have been developed or are being
developed. At the same time, processor technology has improved dramatically in recent years.
The availability of cheap, high-performance processors together with the development of
international standards for video compression has enabled a wide range of video
communications applications.

5. Design and development control and sensing
system
for prosthetic arm
The purpose of this project is to develop a sensing and control system for a prosthetic arm.
The project is divided into two phases:
1. A sensing system for generation of desired for each degree of freedom
2. Control system for each servo motor for gripping different objects
Development of a prototype hardware
security module (HSM)
A hardware security module (HSM) is a standalone hardware computing device manages and
provides safety to the digital keys for strong authentication and provides crypto processing.
These hardware modules are attached to the external network based computer through
communication ports and stores the authentication key on it.
These modules can be used in any process that uses digital symmetric and asymmetric keys
for security. They also facilitate onboard secure cryptographic key generation, key storage and
management. HSMs are also deployed to manage Transparent Data Encryption keys for
databases. HSMs provide both logical and physical protection against attacks.
Implementation of neural network techniques
on FPGA for industrial & medical applications
function/systemstem (linear or non linear) can be modelled as an artificial neural network
(ANN). Typically, neurons are organized in layers.
Different layers may perform different kinds of transformations on their inputs. Signals travel
from the first (input), to the last (output) layer, possibly after traversing the layers multiple
times to model the system effectively.
Multivariable systems have deep neural network (DNN) configuration (i.e. multiple layers) the
training techniques varies from ANN to DNN. Special hardware implementation is required for
an effective DNN. This project is aimed to implement the recurrent DNN methodologies
computations on FPGA for classification.
Implementation of different control
techniques of a Quad copter
Quadcopters are the most common type of small UAV helicopters that use the fixed pitch
propellers. They not only serve as a platform for research in the field of control engineering but
also have military and commercial applications.
A prototype Quadcopter has been developed in DEE. In this project, necessary improvements
will be made in the mechanical design and the required electronics. Furthermore, sequential
loop closing technique will be utilized to design a controller for the system. The designed
controller will be implemented on hardware to demonstrate its performance.
Balancing of Stewart Platform by Sensor
Fusion
A Gough-Stewart platform is a type of parallel robot that has six prismatic actuators attached

6. in pairs to three positions on the platform’s baseplate. Devices placed on the top plate can be
moved in the six degrees of freedom in which it is possible for a freely-suspended body to
move. These are the three linear movements x, y, z (lateral, longitudinal and vertical), and the
three rotations pitch, roll, and yaw.
Automatic Wireless Level Control System
Level control systems are an important part of most industrial and residential setups. The
objective of this project is to design and build a prototype water level control system for
residential use based on the Internet of Things (IoT) concept.
A typical configuration of such a system would involve four modules: two sensor modules for
tank and reservoir, an actuator module to start and stop water pump and, a central monitoring
and control station module. The communication between these modules will take place
wirelessly. The sensor modules will have the option solar power for locations where no
electricity is available. The deliverable for this project will be price competitive, working
prototype.
Implementation of a multistage coil-gun
Recently, electromagnetic weapons and defense has gained a huge attention of strategic
research community. Electromagnetic propellant is one of the research directions in this
regard. Last year a couple of BSEE projects were completed in this area. The aim of this project
is to extend the work done previously and to implement a multistage coil gun to get projectile
velocity above 200m/sec. The project will focus of design of coils, inter coil separation,
capacitor banks for each coil, switching at appropriate timing through feedback, appropriate
selection/implementation of efficient charging for capacitive banks. The project involves a lot
of hardware implementation for DC-DC converters, realization of semiconductor switches for
high pulsed currents and instrumentation to detect position of projectile inside the gun barrel.
Implementation and Evaluation of a proposed
switching-tapped-primary Multilevel Inverter
(STPMLI)
Multilevel inverters have gained a huge importance in power systems, particularly, for
distributed generation. Our students have also been working on multilevel inverters for two
years. A few issues were identified in the most popular Cascaded Multilevel Inverter (CMLI)
designs and a novel design was proposed. Our proposed design uses a transformer with
tapped primary winding and different tapping are power (one at a time) in such a way that we
get a stepped sinewave at the output. The proposed idea was simulated and implemented in a
crude form for a 5 level inverter. This work has shown significant potential in this new topology
with several benefits over CMLIs such as it requires a single DC source. This proposed
topology need further
developments and evaluation which is the focus of this project.
Optimization of the design of a single stage
coil-gun to maximize the projectile speed and
energy efficiency
Recently, electromagnetic weapons and defense has gained a huge attention of strategic
research community. Electromagnetic propellant is one of the research directions in this
regard. Last year a couple of BSEE projects were completed in this area. The aim of this project

7. is to extend the work done previously and optimize the design in terms of achieving the
maximum velocity of the projectile and maximum energy efficiency. Both are critical the for
effectiveness of coil-guns and their acceptance for real applications. This would be based on
mathematical modelling of electromagnetic/electromechanical system, optimization of design
parameters such as coil’s physical size and inductance, capacitance, initial voltage at
capacitive supply etc. It is intensive mathematical work that would result in novel contributions
to this field. Moreover, input power supply design using chargeable batteries and design of
different switches will also be considered.
Want some more ideas?
To get some more final year project ideas for electrical engineers, you may like to visit a
previous post on this topic. For guidance on how to implement a specific project, feel free to
contact and comment.
You got a final year project of your own? Share with all of us in comments.
Share this with your friends:
Click to share on Facebook (Opens in new window)
Click to share on Twitter (Opens in new window)
Click to share on Google+ (Opens in new window)
Click to share on LinkedIn (Opens in new window)
Click to email this to a friend (Opens in new window)
More
Like this:
LIKE Loading...
Learn more:
Filed Under: FYP
Tagged With: BSEE, Final Year Project Ideas, FYP
Leave a Reply

8. Enter your comment here...
Search the site ...
SUBSCRIBE TO BLOG VIA EMAIL
Enter your email address to subscribe to this blog and receive notifications of new posts by
email.
Join 1,658 other subscribers
Email Address
SUBSCRIBE
CATEGORIES
Select Category
RECENT POSTS
Final Year Project Ideas for Electrical Engineering Students June 30, 2018
Comparison of Different Excitation Schemes for Emergency Diesel Generator June 22, 2018
Design of Protection Coordination of a Distribution Network in ETAP June 14, 2018
Modeling and Load Flow Analysis of a Small Power System in ETAP June 11, 2018
Introduction to ETAP for Power System Modeling & Simulations February 2, 2018
FOLLOW US

9. EE POWER SCHOOL
EE Power School
ABOUT EEPS
EE Power School provides a platform for learning Electrical Power Engineering. Feel free to learn, contribute and share.
Happy Learning.
EE POWER SCHOOL
Final Year Project Ideas for Electrical Engineering Students
Comparison of Different Excitation Schemes for Emergency Diesel Generator
Design of Protection Coordination of a Distribution Network in ETAP
Copyright © 2018 · Magazine Pro Theme on Genesis Framework · WordPress · Log in
%d bloggers like this:
“