This document is a CV for Farhan Alam that summarizes his qualifications and experience in non-destructive testing (NDT). It states that he has over 7 years of experience conducting various NDT techniques such as radiography, magnetic particle testing, dye penetrant testing, and ultrasonic thickness testing on oil, gas and petrochemical facilities in Saudi Arabia. It also provides details on his educational background, technical certifications, computer skills, and work history with various Saudi Arabian companies in roles involving quality assurance and NDT inspection.

1. C.V
FARHAN ALAM.
Expertise: ASNT Level – II
Education:
- Pre Eng. (Metric from Karachi board)
- Pre Eng. (Intermediate from Karachi Board).
- B. Com. (Completed From Karachi University).
Computer Skills:
 MS Office
 Internet
 Hardware
Other Experience:

 Worked In Mobilink As Senior Customer Sale Executive (Pakistan).
 Worked In Al-Rashid Geo-Technique Foundation Co as NDT
INSPECTOR Technician (Saudi Arabia).
 Worked In Petro Rabigh Refinery as a NDT INSPECTOR (Saudi Arabia)
2012 TO PRESENT.
Technical Qualification:
ASNT Level II in Magnetic Particle Testing, Dye Penetrant Testing, Radiographic
Testing & Ultrasonic Thickness Testing, Vacuum Box Testing & Hardness Testing.
Summary:
Overall 7 years experience in the field of Non-Destructive Testing Conducting
RT, MPT, DPT, UT Thickness & Thickness Measurement on fabrication plants, Power
Plants, Refineries, Storage tanks, Pipe joints, Pipe lines, Boilers & Turbines. Pressure
Vessels, Exchanger, Nozzles, Towers off shores, Mechanical Companies & Shut Down
Projects.

2. Strength:

 Self-Motivated and Dynamic team player with Leadership quality
 Sense of responsibility and humanity
 Good communication skill
 Fault finding and problem solving nature
 Willing to take challenges
 Familiar with International Standards & Codes
 Worked with American, Asians, Arabs, Filipino.
Summary of Experience:
A dynamic professional with more than 6 years of experience in Saudi Arabia projects
associated Oil & Gas Refinery, Process Plants, Thermal Gas Plants, Oil Refinery, Floor well
(Onshore Exploration), Polypropylene, Propane Dehydrogenation Plant & including establishing
and implementation of Project Quality Management System.
Experience in QA/QC activities of Fabrication installation, testing and pre-commissioning
Related to Station Piping, Pipeline, Tanks, Pressure Vessels, Equipment’s & Structures etc.

 Hands on Experience in Inspection of various Equipment, QA/QC Surveillance, Internal
Quality Audit welding Inspection and Nondestructive Testing in the Area of Oil, Gas
And Petrochemical Plant equipment during and after Fabrication.
 Expertise in organizing various Inspection during services, Fabrication of numerous
Equipment like Pressure Vessels, Heat Exchanger, Column, Jet Fuel Storage Tanks,
Pipeline & Piping.
 Hand on Experience and Organization Inspection, Receiving Inspection, In-process
Inspection, Supplier Quality & Final Inspection.
 Experience in dealing with ASME Inspector, Client of various Projects.
 Process effective communication, Relationship Management and Analytical Skill.
Quality Assurance:

 Review of Contract Documents / scope of work for Contractor.
 Coordinating Project Site Meetings, preparation of site require work Activity Report.
 Perform all the Inspection Activities as per Client Approved Test Plan, Method
Statement.
 Final Documents as per Code and Clients Requirement.
 Review and Verify NDT, Daily Welding, pipe Book, Test Report, test Package and Final
Project Dossier as per Client Requirement.
 Coordinate with completion team to close outstanding punch list for priority system for
Early Startup.
 Perform all the activities with Personal Health, Safety. Environment Requirement.

3. Responsibility as per Inspection(Welding):
Design& Construction

 Review Client approved construction isometric Drawing, P & ID, General Arrangement
Drawing, process Piping AME B31.3, Structural Drawing and Structural Drawing code
AWS D1.1, Pipeline / Flow Line Routing & Alignment Drawing for ASME B31.4
Pipeline Transportation System for Liquid Hydrocarbons and other Liquid.
Material:

 Carried out Incoming Material Inspection as per code and Client requirements.
 Monitoring of Inspection for Material Storage & preservation.
 Review and monitoring of material Identification / Traceability & Approval.
Fabrication:

 Review of PQR, WPS, WQT and other QA/QC related documents.
 Ensuring Qualification of welder and Welding Operator selecting welding process and
Consumable.
 Monitoring before, during and after Welding.
 Witnessing of cold Bending Pipes.
 Carryout inspection for material cleanness, handling & traceability.
 Carryout inspection for fit up, welding, preheat, inter pass temp. Etc.
 Review of Daily welding report and carryout Final weld visual inspection.
 Monitoring and controlling of repair.
Testing & Inspection:

 Witnessing of NDT- DPT, MPT, RT, UTT, Hardness Testing & PWHT.
 Carryout line walk and preparing punch list for Piping, Pipelines, Tanks & Equipment’s.
 Witnessing of Destructive Testing for Procedure Qualification & WQT Test.
Personal Details:-
Father name: - QAMAR ALAM
Date of birth: - 21 / DEC / 1986
Religion: - ISLAM
Marital Status: - MARRIED
Residence Address: - BLOCKS 6 P.E.C.H.S SOCIETY
MAIN SHARA-E-FAISAL
HABIB BANK STREET
KARACHI (Pakistan).
Phone: -

4. Phone: -
E-mail: - Farhan_0786@Hotmail.Com
Languages known: - ENGLISH, URDU, PUNJABI, ARABIC.
Professional Work Experience:
Duration: 2010 Mar: - 2011 APR:
Designation: NDT INSPECTOR
Client SAUDI ELECTRICITY COMPANY
Description of Work:
Carried out RT, MPT, DPT, UT THICKNESS, and Thickness
Measurement on Fabrication works, Plate joints, Plates, Round
Bars, Pipes, Storage Tanks etc.
Shut Down Experience:
Clients: RABIGH POWER PLANTS) Rabigh.
Description of Work:
Carried out RT, MPT, DPT, Hardness testing & Thickness
Measurement on Storage tanks, Pipe joints, Pipe lines, Boilers &
Turbines.
Client SAUDI ELECTRICITY COMPANY) Shoaiba.
Description of Work:
Carried out RT, MPT, and DPT & Thickness Measurement on Pipe
Lines, Storage Tanks, & Structural Jobs.
Duration: 2009 JUN: – 2009 DEC:
Employer: (PETRO RABIGH REFINERY) Rabigh
Designation: NDT Technician
Description of Work:
Carried out RT Testing on Pressure vessels, Storage Tanks, Nozzles,
Towers, off shore Decks, Structural jobs & all Refinery Projects.
GULF EXPERIENCE:
Duration: Mar: - 2009 – APR: - 2011:
Position: NDT Technician.
Scope of Work:
Perform actual NDT Testing such as RT, MPT, and DPT & UT Thickness
On Pressure vessels, Nozzles, Pipe lines, Structural jobs, Intercept Valves
Of Power Plants, Cross Countries Pipelines, and Boiler Pipes & Turbines
Etc. Evaluate Test Conducted as per International Code & Standards or as

5. Per Client Procedures & Specification. Prepare NDT Report &
Documentation for clients Approval. Reporting Daily Activities to the
Company Co-coordinator or NDT Manager.
Projects Involved:
 Supply of NDT Services (Saudi Archirodon Company) Jeddah (KSA).
 Supply of NDT Services (Al- Zamil Metal Works) Jeddah (KSA).
 Supply of NDT Services (Rabigh Power Plants) Rabigh (KSA).
 Supply of NDT Services (Petro Rabigh Refinery) Rabigh (KSA).
 Supply of NDT Services (Saudi Electricity Company) Shoaiba (KSA).
 Supply of NDT Services (Saline Water Conversion Company) Shoaiba (KSA).
 Supply of NDT Services (Saudi European Petrochemical Co. (IBN ZAHR) SABIC)
Jubail (KSA).
 Supply of NDT Services ( WASIT CO-GENERATION PROJECT )( SAUDI ARAMCO)
KSA.
Comments:
I hereby declare that the above furnished details are true to my Knowledge and
belief.