The document summarizes research on fabricating and characterizing a conducting polymer composite of polyvinylpyrrolidone (PVP) and potassium hydroxide (KOH). Specifically: 1. PVP and KOH were mixed using a solution casting method to prepare polymer composite specimens. 2. Tests found that the composite's conductivity and microhardness increased with higher KOH concentrations. The highest conductivity was 4×10-4 S/cm at 35 wt% KOH. 3. Microstructure analysis using an optical microscope showed even KOH distribution throughout the composite at 35 wt% KOH, the concentration with highest conductivity.