Explosion Proof Cable Glands - Prysmian Barrier Glands (424TW) for SWA Steel Wire Armour Cable
•
0 likes•255 views
The document provides information on the BARR-W EEx d IIC Brass Barrier Gland, an explosion proof cable gland for use in hazardous areas. It is suitable for steel wire armored cables and achieves an IP66 seal. It provides mechanical cable retention, electrical continuity through the armor wire, and is weatherproof, waterproof, and suitable for most climatic conditions. It is certified for use in Zone 1 and Zone 2 hazardous areas with a variety of electrical equipment types under the ATEX directive.
Report
Share
Report
Share
Download to read offline
Recommended
Explosion Proof Cable Glands - Prysmian Barrier Glands (424TX) for SWB Steel ...
Explosion Proof Cable Glands - Prysmian Barrier Glands (424TX) for SWB Steel ...Thorne & Derrick International
The 424TX Series brass barrier gland is certified for use in hazardous areas. It provides an IP66 seal for wire braided cables and can be used in Zone 1, Zone 2, and other hazardous areas. The gland is weatherproof, waterproof, and available in various thread sizes and cable diameter ranges to suit a wide variety of applications.Explosion Proof Cable Glands - Prysmian Barrier Glands (424TP) for Lead Sheat...
Explosion Proof Cable Glands - Prysmian Barrier Glands (424TP) for Lead Sheat...Thorne & Derrick International
The document discusses explosion proof cable glands. It describes the Barr-Pb EEx d IIC brass barrier gland, which provides an IP66 seal for lead sheathed cables used in hazardous areas. It can be used in zones 1 and 2, and provides mechanical cable retention, electrical continuity to the armor wire and inner lead sheath. Technical data includes ATEX certification, a service temperature range of -60°C to +90°C, and zones in which it can be used. Tables provide gland details, references, thread sizes, and dimensions.Explosion Proof Cable Glands - Prysmian Barrier Glands (424TA) for Unarmoured...
Explosion Proof Cable Glands - Prysmian Barrier Glands (424TA) for Unarmoured...Thorne & Derrick International
The document provides information on the BARR-A EEx d IIC Brass Barrier Gland 424TA Series explosion proof cable gland. It is certified for use in Zone 1 and Zone 2 hazardous areas and provides an IP66 seal for unarmored cables. The gland is suitable for most climatic conditions and service temperatures ranging from -60°C to +90°C. Technical data includes certifications, applicable standards, and zones of use. Dimensions and part numbers are listed for gland sizes ranging from 20 to 85mm.53 k1d7 c07n1-lv_3.0
This technical data sheet provides specifications for the Rosenberger 53K1D7-C07N1 N 50 Ω straight jack connector. It lists electrical and mechanical characteristics such as an impedance of 50 ohms, a frequency range up to 11 GHz, return loss and insertion loss values, mating cycles over 500, and environmental specifications including operating temperature range, corrosion resistance, and IP68 moisture protection. Materials used include brass, bronze, TPX dielectric, and silicone gaskets.
Webtools WCS54D Wire Rope Cutters up to 54mm - Data Sheet
The document provides information about the WCS54D wire rope cutter, which can cut wire rope up to 54mm in diameter made of 1770N/mm2 grade steel. It is suitable for use at any water depth and also to cut cables and umbilicals. The wire rope cutter weighs approximately 22kg, has a maximum input pressure of 700 bars, and features a corrosion resistant stainless steel construction and manual anvil for diver operation.
Sec ses001 ntcManual
This document describes an external temperature probe (SES 001) that can be used with various temperature and humidity sensors to sense temperature for heating, hot water, and underfloor heating systems. The SES 001 has a flexible, waterproof casing housing a 5mm diameter probe that extends 20mm from the end of a 3m cable. It has an operating temperature range of -40°C to +125°C and is IP68 rated for water resistance. The SES 001 provides accurate temperature readings to extend the capabilities of comfort control systems.
Hawke CSB 656N Hazardous Area Cable Gland
This document provides information on cable glands that are certified for flameproof, increased safety, and dust protection applications in hazardous locations. It includes details on the certifications, technical specifications, features, applications, and ordering information for the cable glands.
Sec sir321 manual
The document describes a range of digital timer controls for switching electrical appliances on and off automatically. The timers include models with countdown timers ranging from 15 minutes to 6 hours, as well as a Z-Wave connected model with additional remote control and temperature sensing capabilities. The timers are designed to save energy by switching devices off automatically when they are forgotten by the user. They can handle loads up to 3kW and are suitable for uses like boiler control, panel heaters, towel rails and more.
Recommended
Explosion Proof Cable Glands - Prysmian Barrier Glands (424TX) for SWB Steel ...
Explosion Proof Cable Glands - Prysmian Barrier Glands (424TX) for SWB Steel ...Thorne & Derrick International
The 424TX Series brass barrier gland is certified for use in hazardous areas. It provides an IP66 seal for wire braided cables and can be used in Zone 1, Zone 2, and other hazardous areas. The gland is weatherproof, waterproof, and available in various thread sizes and cable diameter ranges to suit a wide variety of applications.Explosion Proof Cable Glands - Prysmian Barrier Glands (424TP) for Lead Sheat...
Explosion Proof Cable Glands - Prysmian Barrier Glands (424TP) for Lead Sheat...Thorne & Derrick International
The document discusses explosion proof cable glands. It describes the Barr-Pb EEx d IIC brass barrier gland, which provides an IP66 seal for lead sheathed cables used in hazardous areas. It can be used in zones 1 and 2, and provides mechanical cable retention, electrical continuity to the armor wire and inner lead sheath. Technical data includes ATEX certification, a service temperature range of -60°C to +90°C, and zones in which it can be used. Tables provide gland details, references, thread sizes, and dimensions.Explosion Proof Cable Glands - Prysmian Barrier Glands (424TA) for Unarmoured...
Explosion Proof Cable Glands - Prysmian Barrier Glands (424TA) for Unarmoured...Thorne & Derrick International
The document provides information on the BARR-A EEx d IIC Brass Barrier Gland 424TA Series explosion proof cable gland. It is certified for use in Zone 1 and Zone 2 hazardous areas and provides an IP66 seal for unarmored cables. The gland is suitable for most climatic conditions and service temperatures ranging from -60°C to +90°C. Technical data includes certifications, applicable standards, and zones of use. Dimensions and part numbers are listed for gland sizes ranging from 20 to 85mm.53 k1d7 c07n1-lv_3.0
This technical data sheet provides specifications for the Rosenberger 53K1D7-C07N1 N 50 Ω straight jack connector. It lists electrical and mechanical characteristics such as an impedance of 50 ohms, a frequency range up to 11 GHz, return loss and insertion loss values, mating cycles over 500, and environmental specifications including operating temperature range, corrosion resistance, and IP68 moisture protection. Materials used include brass, bronze, TPX dielectric, and silicone gaskets.
Webtools WCS54D Wire Rope Cutters up to 54mm - Data Sheet
The document provides information about the WCS54D wire rope cutter, which can cut wire rope up to 54mm in diameter made of 1770N/mm2 grade steel. It is suitable for use at any water depth and also to cut cables and umbilicals. The wire rope cutter weighs approximately 22kg, has a maximum input pressure of 700 bars, and features a corrosion resistant stainless steel construction and manual anvil for diver operation.
Sec ses001 ntcManual
This document describes an external temperature probe (SES 001) that can be used with various temperature and humidity sensors to sense temperature for heating, hot water, and underfloor heating systems. The SES 001 has a flexible, waterproof casing housing a 5mm diameter probe that extends 20mm from the end of a 3m cable. It has an operating temperature range of -40°C to +125°C and is IP68 rated for water resistance. The SES 001 provides accurate temperature readings to extend the capabilities of comfort control systems.
Hawke CSB 656N Hazardous Area Cable Gland
This document provides information on cable glands that are certified for flameproof, increased safety, and dust protection applications in hazardous locations. It includes details on the certifications, technical specifications, features, applications, and ordering information for the cable glands.
Sec sir321 manual
The document describes a range of digital timer controls for switching electrical appliances on and off automatically. The timers include models with countdown timers ranging from 15 minutes to 6 hours, as well as a Z-Wave connected model with additional remote control and temperature sensing capabilities. The timers are designed to save energy by switching devices off automatically when they are forgotten by the user. They can handle loads up to 3kW and are suitable for uses like boiler control, panel heaters, towel rails and more.
Flame Retardant & Moisture Resistant Junction Boxes & Electrical Enclosures
This document provides information on flame retardant and moisture resistant junction boxes from Spelsberg UK. It lists 6 box sizes available from 70mm to 190mm, that comply with DIN and VEC standards and can be used up to 690V. The boxes have stepped push-through nipples and metric accessory compatibility, and are gray in color. Dimensions and part numbers are provided for each box size.
Craig & Derricott ATEX Zone 22 Isolators
This document provides information on ATEX Zone 22 certified switch-disconnectors and isolators from Craig & Derricott for use in explosive dust atmospheres. It lists product ratings from 20A to 63A, certifications that comply with relevant standards, technical specifications including short circuit ratings, and enclosure size dimensions from A to D. Applications include grain mills, powder coating plants, chemicals handling, and other industries where combustible dust may be present for short periods.
Zone 1 (ATEX) Recessed Luminaires Hadar HDL102 - (Twin 18 Watts)
The document provides specifications for the HDL 102 recessed luminaire from Hadar Lighting. It can be installed in modular or non-modular ceilings and comes in different configurations with 2 or 4 lamps of 18, 36, or 58 watts each. The luminaire has an IP64 rating and is certified for use in hazardous zones. It has options for emergency lighting, different voltages and cable entries, and can be ordered in a configuration code that specifies fittings, voltage, lamps, and other details.
Zone 1 & 2 Isolators - ATEX Certified Isolators, 16Amp
This technical data sheet provides information on i-switch ATEX Certified Zone 1 Switch Disconnectors for use in hazardous environments. It lists the electrical ratings and certifications for disconnectors ranging from 16A to 250A. Dimensions and standard configurations are provided for each enclosure type, along with example catalogue numbers. Additional configurations can be custom ordered.
Crabtree Starbreaker 2016
This document provides information on Starbreaker consumer units for domestic household premises. It discusses regulations relating to consumer units, including the requirement that enclosures be made of non-combustible material. It then summarizes the key features and models of Starbreaker consumer units, which are full metal enclosures containing MCBs, RCBOs, and RCD protection devices to meet regulations. Various unit options are presented including main switch units, split load units, and dual RCD units.
Webtools RCO54 Wire Rope Cutters - Data Sheet
The document describes a heavy duty wire rope cutter called the RCO54 that is designed for severe working conditions. It can cut wire ropes up to 54mm in diameter and has a corrosion resistant stainless steel body. The cutter has a long-lasting blade and anvil to minimize maintenance and is suitable for operation in confined spaces. Optional accessories include a hydraulic intensifier panel and handle.
Craig & Derricott ATEX Certified Isolators And Switch Disconnectors For Hazar...
Craig & Derricott ATEX Certified Isolators And Switch Disconnectors For Hazar...Thorne & Derrick International
Hazardous Area Isolators
ATEX Isolators - Zone 22 Category 3D Isolators
Craig & Derricott ATEX certified isolators and switch disconnectors for hazardous area Group II, Zone 22, Cat 3D Non-Conductive Dusts - typical installation areas include grain mills, textiles, cargo handling, powder coating plant, chemicals, woodworking and waste processing.
From July 2006 the onus was placed upon companies to ensure that all electrical equipment within their site organisation is suitable for the environment in which it is being used - this was aimed particularly at hazardous areas where there may be a possibility of a combustible atmosphere being present, even for short periods i.e. less than 10 hours/year.
People normally think of such atmospheres as being gases, mists or vapours - however there are various industries where a conductive or non-conductive dust mixed with air in the right proportion can become explosive.
There are different degrees of protection against explosive dusts and hazardous area Zone 22 is defined as : - "a place in which an explosive atmosphere, in the form of a cloud of combustible dust in air, is not likely to occur in normal operation but, if it does occur, will persist for a short period only".
ATEX Directive 94/9/EC sets out the route electrical equipment manufacturers must take to get their products certified for use in hazardous areas.
ATEX Certified Electrical Equipment for Hazardous Areas
ATEX is the name given to a set of European Directives relating to Hazardous Area Electrical Equipment Installations (Flammable Atmospheres) to avoid industrial accident or incident. ATEX Directive 94/9/EC (ATEX 95), is a directive adopted by the EU under the “New Approach” strategy. The “New Approach” ATEX directive supersedes the “Old Approach” ATEX Directive, the Potentially Explosive Atmospheres Directive, 76/117/EEC – ATEX 94/9/EC (ATEX 95) facilitates free trade in the EC for hazardous area electrical equipment intended to be used in potentially explosive atmospheres. ATEX Directive 94/9/EC (ATEX 95) covers “Electrical Equipment” used in hazardous areas with potentially explosive atmospheres created by presence of gases, vapours, mists or dusts.
Webtools RCV135 Wire Rope Cutters Electroless Nickel Plated Steel Constructio...
Webtools RCV135 Wire Rope Cutters Electroless Nickel Plated Steel Constructio...Thorne & Derrick International
This document provides information about the RCV135 wire rope cutter. It can cut wire ropes up to 135mm in diameter made of 1770N/mm2 grade steel. It is suitable for underwater use at any depth and can cut wire ropes, cables, and umbilicals. The cutter has a maximum input pressure of 690 bar for the main cylinder and 210 bar for the anvil. It weighs approximately 176kg and is made of robust plated steel and stainless steel to resist corrosion. Custom designs are available upon request.Datwyler universal safety fire fiber cabel info tech middle east
Datwyler Universal Fiber Optic Fire Safety cable E30 - 30 minutes System Circuit Integrity ..
Metal-free, water resistant, rodent protection,
in accordance with IEC 60332.1 and IEC 60332.3 C
30 minutes System Circuit Integrity according to DIN 4102-12
Application :
Safety applications in tunnels, underground railways, banks, insurance companies, large-scale industry , Public Area , Mall , Towers .
Fiber optic LAN backbone.
Indoor and outdoor cabling.
Can be installed in cable platforms, trays, ducts and vertical shafts.
Can be spliced in FO distributors.
Zero halogen, no corrosive gases :
IEC 60754-1/-2, EN 60754-1/-2, VDE 0482-754-1/-2
Flame propagation:
IEC 60332-1/-2, EN 60332-1-2, VDE 0482-332-1-2
Flame spread:
IEC 60332.3 C, EN 50266-2-4, VDE 0482-266-2-4
Smoke density:
IEC 61034-1/-2, EN 61034-1/-2 (EN 50268-1/-2), VDE 0482-1034-1/-2 (VDE 0482-268-1/-2)
Circuit Integrity (FE180):
IEC 60331-11, IEC 60331-25, VDE 0472 part 814, EN 50200 PH 90, EN 50362, VDE 0482-200, VDE 0482-362:
System circuit integrity
according to DIN 4102 part 12, VKF Fire Safety Application No. 24176
Please Contact Info Tech Middle East for more Detail : Info@InfoTechME.ws
Hadar HDL220 Zone 1 & Zone 21 Fluorescent Luminaire - Ex emb Fluorescent Li...
Hadar HDL220 Zone 1 & Zone 21 Fluorescent Luminaire - Ex emb Fluorescent Li...Thorne & Derrick International
This document provides specifications for the HDL 100 fluorescent luminaire from Hadar Lighting, including:
- It is available in polycarbonate enclosure and lamp envelope materials, with an aluminum powder coated reflector and silicone gaskets.
- It has protection ratings of II 2 G D Ex emb II T4/T5, Ex tD A21 IP66/67 T100°C and is ATEX and IECEx certified for use in hazardous locations.
- Standard models have options for 2x18W, 2x36W or 2x58W fluorescent lamps, and emergency versions are also available.Visibility sensor 56 VISI
The Visibility Sensor 56-VISI-1 is a device that accurately measures atmospheric visibility conditions such as fog, smoke, dust, and haze. It determines visibility by measuring the amount of light scattered by particles passing through its optical sample volume. The sensor has a compact, weather-resistant design and integrated cabling to withstand all weather conditions. It provides visibility readings and outputs the data in various formats through a simple installation and maintenance process.
Craig and Derricott Isolators & Switch Disconnectors - Isolation Equipment an...
Craig and Derricott Isolators & Switch Disconnectors - Isolation Equipment an...Thorne & Derrick International
This document provides information on switch disconnectors and enclosures from Thorne & Derrick UK's i-switch product range. It describes moulded plastic enclosures and deep drawn steel enclosures for housing switchgear rated from 16A to 80A. Safety features like padlocking and an interlock to prevent unauthorized opening are highlighted. Technical specifications and application details are provided for isolator interiors, accessories, and auxiliary contacts. Dimensions and installation guidelines are also included.Hadar Hazardous Area Lighting - HDL102 - Recessed Zone 1
The document provides specifications for the HDL 102 recessed luminaire from Hadar Lighting. It can be installed in modular or non-modular ceilings and comes in different sizes to accommodate various lamp configurations like 2x18W or 4x36W fluorescent lamps. The luminaire has an IP64 rating and Zone 1 certification making it suitable for use in hazardous areas where gas and dust may be present. Key features include ease of maintenance, high frequency electronic control gear, and overvoltage protection.
Aluminium Control Panels - Walsall ASMCP/AL EEx d Control Panels
This document provides information on electrical equipment for hazardous environments made by Walsall Ltd. It includes terminal enclosures, local control panels, distribution boards, lighting, and other equipment certified for use in explosive atmospheres. The company was founded in 1892 and originally manufactured bangles and metalwork, later expanding into electrical equipment. It offers a wide range of explosion proof products made from materials like stainless steel, aluminum, and GRP.
Zone 1 (ATEX) Bulkhead Fluorescent Fire Exit Luminaire - HDL108, (32 Watts)
Zone 1 (ATEX) Bulkhead Fluorescent Fire Exit Luminaire - HDL108, (32 Watts)Thorne & Derrick International
This document provides specifications for the Hadar Lighting HDL 108 bulkhead luminaire. It is designed for use in hazardous areas and includes two 18W compact fluorescent lamps, a steel or stainless steel enclosure, prismatic glass diffuser, and silicone gasket. It has a T3/T4 temperature rating and IP64 ingress protection. The luminaire can be surface or recessed mounted, with cable entries on any face or rear, and is available as a standard or emergency light.ABB Kabeldon 145kV Dry Cable Termination - IEC 60840
This document provides product information for the TD 145 dry pre-assembled cable termination for outdoor use. It can be used for fixed connections and in installations with high creepage currents. The termination meets IEC 60840 standards and contains a prefabricated termination, top bolt, and other components. It has a minimum creepage distance of 4650mm, fulfilling Pollution Class IV requirements. The pre-assembled termination reduces installation time and can be installed horizontally or vertically without on-site filling.
Zone 2 ATEX Lighting Fluorescent Luminaire - Hadar HDL220 (1 x 18W Lamp)
Zone 2 ATEX Lighting Fluorescent Luminaire - Hadar HDL220 (1 x 18W Lamp)Thorne & Derrick International
This document provides information on the HDL 220 Zone 2 EEx nA Fluorescent Luminaire from Hadar Lighting. The luminaire is designed for hazardous area applications and features a corrosion resistant glass and polyester body with a high impact polycarbonate diffuser. It is available in 18W, 36W, and 58W models, with single or twin lamp options. The luminaire has a high frequency electronic ballast and is certified by SIRA for use in hazardous areas.3M Electrical Products Stocked By Thorne & Derrick International
This document provides information on 3M's electrical products, including electrical connectors, wire connectors, splice kits, wire markers, and protective coatings. It highlights key features and applications of 3M's Scotchlok electrical insulation displacement connectors, Performance Plus wire connectors, direct bury splice kits, ScotchCode wire markers, insulating and anti-corrosion sprays, and Scotchkote electrical coating. The document is intended to showcase 3M's quality solutions for electrical connections, identification, and corrosion protection.
Prysmian KCA472 E1FW Flameproof Bicon Gland Kit
The document summarizes a weatherproof cable gland for use in hazardous areas. It has dual seals to provide IP66 protection and can accommodate various cable sizes. The gland kit includes components for securing and sealing cables. It is certified for use in explosive gas and dust hazardous areas when used with appropriately certified equipment.
Thermon KSR-2 Heat Tracing Cable - Spec Sheet
This document provides product specifications for KSR self-regulating heating cables intended for snow and ice melting applications. The cables feature a nickel-plated copper bus wire, semiconductive heating matrix, fluoropolymer insulation, and tinned copper braid. They are designed to withstand direct burial in concrete and automatically regulate heat output in response to surrounding temperatures from -60°C to 121°C. The document also lists electrical characteristics, power output curves, accessories, and certification information for easy design and installation of snow melting systems using KSR cables.
Armarios Coleccion Rosabel
Fabricación de mobiliario infantil y juvenil.
3 generaciones avalan la experiencia de esta empresa que se dedica a la fabricación de mueble infantil y juvenil.
Para construir una relación de transparencia y confianza con nuestros clientes, y prestarles un servicio de calidad y eficiencia, Colección Rosabel trabaja con un grupo de proveedores que ofrecen unas excelentes condiciones de calidad y seguridad, como son:
HETTICH, HäFELE, GRAU, REI, WURTH.
Colección Rosabel tiene muy en cuenta el respeto al medio ambiente y en su beneficio, toda la materia prima con la que se trabaja, proviene de un sistema de producción de madera y de procesos ecológicos.
Para satisfacer a nuestros clientes, contamos con ofrecer un buen diseño, una buena política de precios y calidad.
Esta calidad viene demostrada con el Documento de Calificación Artesana concedido por la Generalitat Valenciana y el certificado de Símbolo Calidad Controlada, concedida por AIDIMA.
More Related Content
What's hot
Flame Retardant & Moisture Resistant Junction Boxes & Electrical Enclosures
This document provides information on flame retardant and moisture resistant junction boxes from Spelsberg UK. It lists 6 box sizes available from 70mm to 190mm, that comply with DIN and VEC standards and can be used up to 690V. The boxes have stepped push-through nipples and metric accessory compatibility, and are gray in color. Dimensions and part numbers are provided for each box size.
Craig & Derricott ATEX Zone 22 Isolators
This document provides information on ATEX Zone 22 certified switch-disconnectors and isolators from Craig & Derricott for use in explosive dust atmospheres. It lists product ratings from 20A to 63A, certifications that comply with relevant standards, technical specifications including short circuit ratings, and enclosure size dimensions from A to D. Applications include grain mills, powder coating plants, chemicals handling, and other industries where combustible dust may be present for short periods.
Zone 1 (ATEX) Recessed Luminaires Hadar HDL102 - (Twin 18 Watts)
The document provides specifications for the HDL 102 recessed luminaire from Hadar Lighting. It can be installed in modular or non-modular ceilings and comes in different configurations with 2 or 4 lamps of 18, 36, or 58 watts each. The luminaire has an IP64 rating and is certified for use in hazardous zones. It has options for emergency lighting, different voltages and cable entries, and can be ordered in a configuration code that specifies fittings, voltage, lamps, and other details.
Zone 1 & 2 Isolators - ATEX Certified Isolators, 16Amp
This technical data sheet provides information on i-switch ATEX Certified Zone 1 Switch Disconnectors for use in hazardous environments. It lists the electrical ratings and certifications for disconnectors ranging from 16A to 250A. Dimensions and standard configurations are provided for each enclosure type, along with example catalogue numbers. Additional configurations can be custom ordered.
Crabtree Starbreaker 2016
This document provides information on Starbreaker consumer units for domestic household premises. It discusses regulations relating to consumer units, including the requirement that enclosures be made of non-combustible material. It then summarizes the key features and models of Starbreaker consumer units, which are full metal enclosures containing MCBs, RCBOs, and RCD protection devices to meet regulations. Various unit options are presented including main switch units, split load units, and dual RCD units.
Webtools RCO54 Wire Rope Cutters - Data Sheet
The document describes a heavy duty wire rope cutter called the RCO54 that is designed for severe working conditions. It can cut wire ropes up to 54mm in diameter and has a corrosion resistant stainless steel body. The cutter has a long-lasting blade and anvil to minimize maintenance and is suitable for operation in confined spaces. Optional accessories include a hydraulic intensifier panel and handle.
Craig & Derricott ATEX Certified Isolators And Switch Disconnectors For Hazar...
Craig & Derricott ATEX Certified Isolators And Switch Disconnectors For Hazar...Thorne & Derrick International
Hazardous Area Isolators
ATEX Isolators - Zone 22 Category 3D Isolators
Craig & Derricott ATEX certified isolators and switch disconnectors for hazardous area Group II, Zone 22, Cat 3D Non-Conductive Dusts - typical installation areas include grain mills, textiles, cargo handling, powder coating plant, chemicals, woodworking and waste processing.
From July 2006 the onus was placed upon companies to ensure that all electrical equipment within their site organisation is suitable for the environment in which it is being used - this was aimed particularly at hazardous areas where there may be a possibility of a combustible atmosphere being present, even for short periods i.e. less than 10 hours/year.
People normally think of such atmospheres as being gases, mists or vapours - however there are various industries where a conductive or non-conductive dust mixed with air in the right proportion can become explosive.
There are different degrees of protection against explosive dusts and hazardous area Zone 22 is defined as : - "a place in which an explosive atmosphere, in the form of a cloud of combustible dust in air, is not likely to occur in normal operation but, if it does occur, will persist for a short period only".
ATEX Directive 94/9/EC sets out the route electrical equipment manufacturers must take to get their products certified for use in hazardous areas.
ATEX Certified Electrical Equipment for Hazardous Areas
ATEX is the name given to a set of European Directives relating to Hazardous Area Electrical Equipment Installations (Flammable Atmospheres) to avoid industrial accident or incident. ATEX Directive 94/9/EC (ATEX 95), is a directive adopted by the EU under the “New Approach” strategy. The “New Approach” ATEX directive supersedes the “Old Approach” ATEX Directive, the Potentially Explosive Atmospheres Directive, 76/117/EEC – ATEX 94/9/EC (ATEX 95) facilitates free trade in the EC for hazardous area electrical equipment intended to be used in potentially explosive atmospheres. ATEX Directive 94/9/EC (ATEX 95) covers “Electrical Equipment” used in hazardous areas with potentially explosive atmospheres created by presence of gases, vapours, mists or dusts.
Webtools RCV135 Wire Rope Cutters Electroless Nickel Plated Steel Constructio...
Webtools RCV135 Wire Rope Cutters Electroless Nickel Plated Steel Constructio...Thorne & Derrick International
This document provides information about the RCV135 wire rope cutter. It can cut wire ropes up to 135mm in diameter made of 1770N/mm2 grade steel. It is suitable for underwater use at any depth and can cut wire ropes, cables, and umbilicals. The cutter has a maximum input pressure of 690 bar for the main cylinder and 210 bar for the anvil. It weighs approximately 176kg and is made of robust plated steel and stainless steel to resist corrosion. Custom designs are available upon request.Datwyler universal safety fire fiber cabel info tech middle east
Datwyler Universal Fiber Optic Fire Safety cable E30 - 30 minutes System Circuit Integrity ..
Metal-free, water resistant, rodent protection,
in accordance with IEC 60332.1 and IEC 60332.3 C
30 minutes System Circuit Integrity according to DIN 4102-12
Application :
Safety applications in tunnels, underground railways, banks, insurance companies, large-scale industry , Public Area , Mall , Towers .
Fiber optic LAN backbone.
Indoor and outdoor cabling.
Can be installed in cable platforms, trays, ducts and vertical shafts.
Can be spliced in FO distributors.
Zero halogen, no corrosive gases :
IEC 60754-1/-2, EN 60754-1/-2, VDE 0482-754-1/-2
Flame propagation:
IEC 60332-1/-2, EN 60332-1-2, VDE 0482-332-1-2
Flame spread:
IEC 60332.3 C, EN 50266-2-4, VDE 0482-266-2-4
Smoke density:
IEC 61034-1/-2, EN 61034-1/-2 (EN 50268-1/-2), VDE 0482-1034-1/-2 (VDE 0482-268-1/-2)
Circuit Integrity (FE180):
IEC 60331-11, IEC 60331-25, VDE 0472 part 814, EN 50200 PH 90, EN 50362, VDE 0482-200, VDE 0482-362:
System circuit integrity
according to DIN 4102 part 12, VKF Fire Safety Application No. 24176
Please Contact Info Tech Middle East for more Detail : Info@InfoTechME.ws
Hadar HDL220 Zone 1 & Zone 21 Fluorescent Luminaire - Ex emb Fluorescent Li...
Hadar HDL220 Zone 1 & Zone 21 Fluorescent Luminaire - Ex emb Fluorescent Li...Thorne & Derrick International
This document provides specifications for the HDL 100 fluorescent luminaire from Hadar Lighting, including:
- It is available in polycarbonate enclosure and lamp envelope materials, with an aluminum powder coated reflector and silicone gaskets.
- It has protection ratings of II 2 G D Ex emb II T4/T5, Ex tD A21 IP66/67 T100°C and is ATEX and IECEx certified for use in hazardous locations.
- Standard models have options for 2x18W, 2x36W or 2x58W fluorescent lamps, and emergency versions are also available.Visibility sensor 56 VISI
The Visibility Sensor 56-VISI-1 is a device that accurately measures atmospheric visibility conditions such as fog, smoke, dust, and haze. It determines visibility by measuring the amount of light scattered by particles passing through its optical sample volume. The sensor has a compact, weather-resistant design and integrated cabling to withstand all weather conditions. It provides visibility readings and outputs the data in various formats through a simple installation and maintenance process.
Craig and Derricott Isolators & Switch Disconnectors - Isolation Equipment an...
Craig and Derricott Isolators & Switch Disconnectors - Isolation Equipment an...Thorne & Derrick International
This document provides information on switch disconnectors and enclosures from Thorne & Derrick UK's i-switch product range. It describes moulded plastic enclosures and deep drawn steel enclosures for housing switchgear rated from 16A to 80A. Safety features like padlocking and an interlock to prevent unauthorized opening are highlighted. Technical specifications and application details are provided for isolator interiors, accessories, and auxiliary contacts. Dimensions and installation guidelines are also included.Hadar Hazardous Area Lighting - HDL102 - Recessed Zone 1
The document provides specifications for the HDL 102 recessed luminaire from Hadar Lighting. It can be installed in modular or non-modular ceilings and comes in different sizes to accommodate various lamp configurations like 2x18W or 4x36W fluorescent lamps. The luminaire has an IP64 rating and Zone 1 certification making it suitable for use in hazardous areas where gas and dust may be present. Key features include ease of maintenance, high frequency electronic control gear, and overvoltage protection.
Aluminium Control Panels - Walsall ASMCP/AL EEx d Control Panels
This document provides information on electrical equipment for hazardous environments made by Walsall Ltd. It includes terminal enclosures, local control panels, distribution boards, lighting, and other equipment certified for use in explosive atmospheres. The company was founded in 1892 and originally manufactured bangles and metalwork, later expanding into electrical equipment. It offers a wide range of explosion proof products made from materials like stainless steel, aluminum, and GRP.
Zone 1 (ATEX) Bulkhead Fluorescent Fire Exit Luminaire - HDL108, (32 Watts)
Zone 1 (ATEX) Bulkhead Fluorescent Fire Exit Luminaire - HDL108, (32 Watts)Thorne & Derrick International
This document provides specifications for the Hadar Lighting HDL 108 bulkhead luminaire. It is designed for use in hazardous areas and includes two 18W compact fluorescent lamps, a steel or stainless steel enclosure, prismatic glass diffuser, and silicone gasket. It has a T3/T4 temperature rating and IP64 ingress protection. The luminaire can be surface or recessed mounted, with cable entries on any face or rear, and is available as a standard or emergency light.ABB Kabeldon 145kV Dry Cable Termination - IEC 60840
This document provides product information for the TD 145 dry pre-assembled cable termination for outdoor use. It can be used for fixed connections and in installations with high creepage currents. The termination meets IEC 60840 standards and contains a prefabricated termination, top bolt, and other components. It has a minimum creepage distance of 4650mm, fulfilling Pollution Class IV requirements. The pre-assembled termination reduces installation time and can be installed horizontally or vertically without on-site filling.
Zone 2 ATEX Lighting Fluorescent Luminaire - Hadar HDL220 (1 x 18W Lamp)
Zone 2 ATEX Lighting Fluorescent Luminaire - Hadar HDL220 (1 x 18W Lamp)Thorne & Derrick International
This document provides information on the HDL 220 Zone 2 EEx nA Fluorescent Luminaire from Hadar Lighting. The luminaire is designed for hazardous area applications and features a corrosion resistant glass and polyester body with a high impact polycarbonate diffuser. It is available in 18W, 36W, and 58W models, with single or twin lamp options. The luminaire has a high frequency electronic ballast and is certified by SIRA for use in hazardous areas.3M Electrical Products Stocked By Thorne & Derrick International
This document provides information on 3M's electrical products, including electrical connectors, wire connectors, splice kits, wire markers, and protective coatings. It highlights key features and applications of 3M's Scotchlok electrical insulation displacement connectors, Performance Plus wire connectors, direct bury splice kits, ScotchCode wire markers, insulating and anti-corrosion sprays, and Scotchkote electrical coating. The document is intended to showcase 3M's quality solutions for electrical connections, identification, and corrosion protection.
Prysmian KCA472 E1FW Flameproof Bicon Gland Kit
The document summarizes a weatherproof cable gland for use in hazardous areas. It has dual seals to provide IP66 protection and can accommodate various cable sizes. The gland kit includes components for securing and sealing cables. It is certified for use in explosive gas and dust hazardous areas when used with appropriately certified equipment.
Thermon KSR-2 Heat Tracing Cable - Spec Sheet
This document provides product specifications for KSR self-regulating heating cables intended for snow and ice melting applications. The cables feature a nickel-plated copper bus wire, semiconductive heating matrix, fluoropolymer insulation, and tinned copper braid. They are designed to withstand direct burial in concrete and automatically regulate heat output in response to surrounding temperatures from -60°C to 121°C. The document also lists electrical characteristics, power output curves, accessories, and certification information for easy design and installation of snow melting systems using KSR cables.
What's hot (20)
Flame Retardant & Moisture Resistant Junction Boxes & Electrical Enclosures
Flame Retardant & Moisture Resistant Junction Boxes & Electrical Enclosures
Zone 1 (ATEX) Recessed Luminaires Hadar HDL102 - (Twin 18 Watts)
Zone 1 (ATEX) Recessed Luminaires Hadar HDL102 - (Twin 18 Watts)
Zone 1 & 2 Isolators - ATEX Certified Isolators, 16Amp
Zone 1 & 2 Isolators - ATEX Certified Isolators, 16Amp
Craig & Derricott ATEX Certified Isolators And Switch Disconnectors For Hazar...
Craig & Derricott ATEX Certified Isolators And Switch Disconnectors For Hazar...
Webtools RCV135 Wire Rope Cutters Electroless Nickel Plated Steel Constructio...
Webtools RCV135 Wire Rope Cutters Electroless Nickel Plated Steel Constructio...
Datwyler universal safety fire fiber cabel info tech middle east
Datwyler universal safety fire fiber cabel info tech middle east
Hadar HDL220 Zone 1 & Zone 21 Fluorescent Luminaire - Ex emb Fluorescent Li...
Hadar HDL220 Zone 1 & Zone 21 Fluorescent Luminaire - Ex emb Fluorescent Li...
Craig and Derricott Isolators & Switch Disconnectors - Isolation Equipment an...
Craig and Derricott Isolators & Switch Disconnectors - Isolation Equipment an...
Hadar Hazardous Area Lighting - HDL102 - Recessed Zone 1
Hadar Hazardous Area Lighting - HDL102 - Recessed Zone 1
Aluminium Control Panels - Walsall ASMCP/AL EEx d Control Panels
Aluminium Control Panels - Walsall ASMCP/AL EEx d Control Panels
Zone 1 (ATEX) Bulkhead Fluorescent Fire Exit Luminaire - HDL108, (32 Watts)
Zone 1 (ATEX) Bulkhead Fluorescent Fire Exit Luminaire - HDL108, (32 Watts)
ABB Kabeldon 145kV Dry Cable Termination - IEC 60840
ABB Kabeldon 145kV Dry Cable Termination - IEC 60840
Zone 2 ATEX Lighting Fluorescent Luminaire - Hadar HDL220 (1 x 18W Lamp)
Zone 2 ATEX Lighting Fluorescent Luminaire - Hadar HDL220 (1 x 18W Lamp)
3M Electrical Products Stocked By Thorne & Derrick International
3M Electrical Products Stocked By Thorne & Derrick International
Viewers also liked
Armarios Coleccion Rosabel
Fabricación de mobiliario infantil y juvenil.
3 generaciones avalan la experiencia de esta empresa que se dedica a la fabricación de mueble infantil y juvenil.
Para construir una relación de transparencia y confianza con nuestros clientes, y prestarles un servicio de calidad y eficiencia, Colección Rosabel trabaja con un grupo de proveedores que ofrecen unas excelentes condiciones de calidad y seguridad, como son:
HETTICH, HäFELE, GRAU, REI, WURTH.
Colección Rosabel tiene muy en cuenta el respeto al medio ambiente y en su beneficio, toda la materia prima con la que se trabaja, proviene de un sistema de producción de madera y de procesos ecológicos.
Para satisfacer a nuestros clientes, contamos con ofrecer un buen diseño, una buena política de precios y calidad.
Esta calidad viene demostrada con el Documento de Calificación Artesana concedido por la Generalitat Valenciana y el certificado de Símbolo Calidad Controlada, concedida por AIDIMA.
Did you mean 'Galene'?
The document describes the architecture of Galene, LinkedIn's search stack. It consists of a frontend, backend, federator, brokers, and search verticals. The federator routes queries to brokers which then query searchers to retrieve results from indexes. Results are merged, blended and returned. Live updates are supported through incremental updates to segmented indexes while maintaining a static rank ordering.
VETQI Project - Exploitation Strategy
This presentation is referred to the future exploitation of the Leonardo Da Vinci Development of Innovation project called VETQI - VET Quality in ICT - www.vetqi.eu -
Kidflier6.5
A description and instructions for building and flying a home-made balsa wood and copier-paper toy airplane. The plane is designed for beginners with no experience, and requires white glue, a glue stick, scissors, a sheet of paper and two sizes of balsa wood. A common, 3 foot or 1 meter length of 1/16 (1.5mm) square would make 4 planes. As with Stone Soup, a 7 or 8 inch (175-200mm) length of 1/8" (3mm) square stock would improve all 4. Wire and paper bag ties make good nose weights, non-drying modelling clay, etc. work too.
7th grade parent informational meeting on grading procedures
Mr. Bigsby and the seventh grade teaching team presented the grading procedures and philosophy to seventh grade parents. They discussed issues around Jupiter Grades, retakes, and homework. The presentation explained that the purpose of assessments is to communicate student achievement and progress over time, not as rewards, and that grades reflect learning not earnings. Teachers then presented examples of assignments and rubrics from different subjects.
Bi35339342
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
X2 T01 09 geometrical representation (2011)
The document discusses representing complex numbers geometrically using vectors on an Argand diagram. It states that complex numbers can be represented as vectors, with the advantage that vectors can be moved around the diagram while preserving their length and angle. It describes how to add and subtract complex numbers by placing the vectors head to tail or head to head, forming a parallelogram. It also discusses the triangular inequality property as it applies to complex number addition and subtraction.
Javier Celaya Web20 y libro universitario
Descripción de las funciones de las tecnologías participativas web20 en la promoción y difusión del libro universitario, realizada por Javier Celaya en la Asamblea de Palma 2007 de la Unión de Editoriales Universitarias
6 sop
This document discusses the benefits of using intranet technology within organizations. It begins by defining intranet as a private internal network that uses the same tools and standards as the public internet but is only accessible to employees within an organization. The document then lists several key advantages of using intranet including: promoting a paperless office and reducing printing/distribution costs; supporting more efficient sales/marketing efforts; improving customer service; enabling online training opportunities; making educational and research institutions more efficient; allowing cross-platform compatibility; and being relatively inexpensive to develop and maintain. Overall, the document argues that intranet can enhance productivity, communication, and performance within organizations.
Q2 2014 Investor Teleconference Presentation
Broadwind Energy reported strong financial results in Q2 2014 compared to the previous year. Revenue increased 29% driven by higher tower and gearing sales. Gross margins improved significantly by 470 basis points due to increased volumes and productivity improvements. EPS of $0.12 was well ahead of the prior year. Order backlog reached $222 million, up 56% from the previous year, providing visibility into 2015. The presentation highlighted continued demand in key end markets and operational improvements that strengthened Broadwind's financial position.
Volunteer work in india
This document describes volunteering opportunities in India through the organization iSpiice, including teaching English through private tutoring and classes, providing childcare through activities like IT training and English classes, empowering women with computer and health classes and private tutoring, and additional programs like daycare training, renovation classes, and summer camps. Contact information is provided to learn more.
2011 kings report
This document provides a summary of real estate activity in 2011 for various neighborhoods in the Kings School District. It lists each neighborhood and the number of housing units sold along with the price range. In total, it shows that 50 homes were sold with no neighborhood listed. The document also provides contact information for Madeline Hoge, an executive sales vice president at Sibcy Cline Northeast, and notes that the real estate figures refer to properties sold with a residential real estate agent using data from the Cincinnati MLS.
Youtube - Presentación
Se pueden buscar videos en YouTube introduciendo palabras clave en el cuadro de búsqueda, navegando los videos más vistos ordenados cronológicamente desde la solapa de video, o consultando canales de usuarios agrupados por temática o comunidades sobre temas comunes.
Viewers also liked (18)
7th grade parent informational meeting on grading procedures
7th grade parent informational meeting on grading procedures
Similar to Explosion Proof Cable Glands - Prysmian Barrier Glands (424TW) for SWA Steel Wire Armour Cable
Ramp Heating - Thermon KSR-2 Heat Tracing Cables (Self-Regulating)
This document provides product specifications for KSR self-regulating heating cables intended for snow and ice melting applications. The cables feature a nickel-plated copper bus wire, semiconductive heating matrix, fluoropolymer insulation, and tinned copper braid. They are designed to withstand direct burial in concrete and automatically adjust heat output in response to surrounding temperatures from -60°C to 121°C. The document also lists electrical characteristics, power output curves, accessories, and certification information for easy design and installation of snow melting systems using KSR cables.
Prysmian Cable Cleats - Bicon Multicleats & Bicon Multistraps (Stainless Steel)
Prysmian Cable Cleats - Bicon Multicleats & Bicon Multistraps (Stainless Steel)Thorne & Derrick International
The document describes Prysmian's Multicleat/Multistrap cable fixing system. It provides details on the components of the system including Multicleats, Multistraps, and LSF Liners. Multicleats are cable cleats with bases that can anchor cables individually or in trefoil formation. Multistraps are used as intermediate restraints between Multicleats and can bind cables together. The document lists specifications for different Multicleat and Multistrap sizes based on cable diameter ranges and provides installation guidelines.CMP PX2K-20S Barrier Glands Exd Flameproof (ATEX) Cable Glands
CMP PX2K Cable Glands (Barrier Glands Exd Flameproof with ATEX Certification for Hazardous Areas)
Cable Gland Size 20S (M20) 1/2" NPT Entry Thread Standard, 3/4" NPT Optional
Cable Gland Suits Cable Diameters 9.5mm-15.9mm
CMP PX2K barrier cable glands are ATEX certified and suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound filled barrier glands for cable terminations within ATEX areas are supplied with a "universal" reversible armour ring to suit all types of armoured cables - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. Barrier cable glands provide a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The CMP PX2K cable gland provides a mechanical cable retention and electrical continuity via the cable armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal cable clamping ring arrangement allows the cable to be easily disconnected from the electrical equipment and easily re-connected. This cable gland feature facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access.
Cable Glands are suitable for following cable types - Wire Braid Armour, Single Steel Wire Armour (SWA), Screened Flexible Wire Braid (eg CY or SY), Steel Tape Armour (STA), Pliable Wire Armour (PWA)
Cable Sealing Area - Inner Compound Barrier and Cable Outer Sheath
CMP PX2K cable glands with offshore and marine approvals including Lloyds, DNV and ABS are available - LSF cable gland shrouds available for low smoke and fume cable terminations.
CMP PX2K & PXSS2K Barrier Cable Glands, Flameproof Exd and Increased Safety Exe
CMP PX2K & PXSS2K Barrier Cable Glands, Flameproof Exd and Increased Safety Exe Thorne & Derrick International
CMP PX2K Barrier Cable Glands (ATEX Certified) for Hazardous Areas
Zone 1, Zone 2, Zone 21, Zone 22 (Flameproof Exd) Cable Termination
CMP PX2K Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) barrier gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 hazardous areas - suitable with all types of armoured cable providing a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath.
CMP PX2K barrier cable glands are ATEX certified for use with equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound barrier glands for cable terminations within ATEX hazardous areas areas are supplied with a "universal" reversible armour clamp to suit all types of armoured cable termination - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas.
CMP PXSS2K barrier cable glands are Class I Division 2 ABCD approved for use with non-armoured marine and tray cable (type TC) providing a compound barrier seal around the cable conductors and an environmental seal on the cable outer jacket - the PXSS2K barrier glands are IP68 rated.
CMP PX2K and PXSS2K barrier cable glands provide mechanical cable retention - a combined detachable spacer and compound tube allows the cable to be easily disconnected from the equipment for maintenance. This feature also facilitates remote make off procedures when the barrier termination is to be conducted in confined spaces.
CMP PX2K-40 Barrier Glands Exd Flameproof (ATEX) Cable Glands
CMP PX2K Cable Glands (Barrier Glands Exd Flameproof with ATEX Certification for Hazardous Areas)
Cable Gland Size 40 (M40) 1.1/4" NPT Entry Thread Standard, 1.1/2" NPT Optional
Cable Gland Suits Cable Diameters 27.9mm-40.4mm
CMP PX2K barrier cable glands are ATEX certified and suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound filled barrier glands for cable terminations within ATEX areas are supplied with a "universal" reversible armour ring to suit all types of armoured cables - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. Barrier cable glands provide a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The CMP PX2K cable gland provides a mechanical cable retention and electrical continuity via the cable armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal cable clamping ring arrangement allows the cable to be easily disconnected from the electrical equipment and easily re-connected. This cable gland feature facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access.
Cable Glands are suitable for following cable types - Wire Braid Armour, Single Steel Wire Armour (SWA), Screened Flexible Wire Braid (eg CY or SY), Steel Tape Armour (STA), Pliable Wire Armour (PWA)
Cable Sealing Area - Inner Compound Barrier and Cable Outer Sheath
CMP PX2K cable glands with offshore and marine approvals including Lloyds, DNV and ABS are available - LSF cable gland shrouds available for low smoke and fume cable terminations.
CMP PX2K-20S/16 Barrier Glands Exd Flameproof (ATEX) Cable Glands
CMP PX2K Cable Glands (Barrier Glands Exd Flameproof with ATEX Certification for Hazardous Areas)
Cable Gland Size 20S/16 (M20) 1/2" NPT Entry Thread Standard, 3/4" NPT Optional
Cable Gland Suits Cable Diameters 6.1mm-11.5mm
CMP PX2K barrier cable glands are ATEX certified and suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound filled barrier glands for cable terminations within ATEX areas are supplied with a "universal" reversible armour ring to suit all types of armoured cables - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. Barrier cable glands provide a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The CMP PX2K cable gland provides a mechanical cable retention and electrical continuity via the cable armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal cable clamping ring arrangement allows the cable to be easily disconnected from the electrical equipment and easily re-connected. This cable gland feature facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access.
Cable Glands are suitable for following cable types - Wire Braid Armour, Single Steel Wire Armour (SWA), Screened Flexible Wire Braid (eg CY or SY), Steel Tape Armour (STA), Pliable Wire Armour (PWA)
Cable Sealing Area - Inner Compound Barrier and Cable Outer Sheath
CMP PX2K cable glands with offshore and marine approvals including Lloyds, DNV and ABS are available - LSF cable gland shrouds available for low smoke and fume cable terminations.
CMP PX2K-50S Barrier Glands Exd Flameproof (ATEX) Cable Glands
This document provides technical specifications for the CMP PX2K cable gland, including:
- It is suitable for use in hazardous zones 1, 2, 21, and 22, and provides flameproof, increased safety, and restricted breathing protection.
- It comes in a kit with two detachable armor cones for different cable types and allows easy connection and disconnection of cables for maintenance.
- It provides details on material composition, temperature ratings, approvals, and dimensional specifications for selecting the appropriately sized cable gland.
CMP PX2K-20 Barrier Glands Exd Flameproof (ATEX) Cable Glands
CMP PX2K Cable Glands (Barrier Glands Exd Flameproof with ATEX Certification for Hazardous Areas)
Cable Gland Size 20 (M20) 1/2" NPT Entry Thread Standard, 3/4" NPT Optional
Cable Gland Suits Cable Diameters 12.5mm-20.9mm
CMP PX2K barrier cable glands are ATEX certified and suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound filled barrier glands for cable terminations within ATEX areas are supplied with a "universal" reversible armour ring to suit all types of armoured cables - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. Barrier cable glands provide a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The CMP PX2K cable gland provides a mechanical cable retention and electrical continuity via the cable armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal cable clamping ring arrangement allows the cable to be easily disconnected from the electrical equipment and easily re-connected. This cable gland feature facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access.
Cable Glands are suitable for following cable types - Wire Braid Armour, Single Steel Wire Armour (SWA), Screened Flexible Wire Braid (eg CY or SY), Steel Tape Armour (STA), Pliable Wire Armour (PWA)
Cable Sealing Area - Inner Compound Barrier and Cable Outer Sheath
CMP PX2K cable glands with offshore and marine approvals including Lloyds, DNV and ABS are available - LSF cable gland shrouds available for low smoke and fume cable terminations.
CMP PX2K-63 Barrier Glands Exd Flameproof (ATEX) Cable Glands
CMP PX2K Cable Glands (Barrier Glands Exd Flameproof with ATEX Certification for Hazardous Areas)
Cable Gland Size 63 (M63) 2.1/2" NPT Entry Thread Standard, 3" NPT Optional
Cable Gland Suits Cable Diameters 54.6mm-65.9mm
CMP PX2K barrier cable glands are ATEX certified and suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound filled barrier glands for cable terminations within ATEX areas are supplied with a "universal" reversible armour ring to suit all types of armoured cables - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. Barrier cable glands provide a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The CMP PX2K cable gland provides a mechanical cable retention and electrical continuity via the cable armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal cable clamping ring arrangement allows the cable to be easily disconnected from the electrical equipment and easily re-connected. This cable gland feature facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access.
Cable Glands are suitable for following cable types - Wire Braid Armour, Single Steel Wire Armour (SWA), Screened Flexible Wire Braid (eg CY or SY), Steel Tape Armour (STA), Pliable Wire Armour (PWA)
Cable Sealing Area - Inner Compound Barrier and Cable Outer Sheath
CMP PX2K cable glands with offshore and marine approvals including Lloyds, DNV and ABS are available - LSF cable gland shrouds available for low smoke and fume cable terminations.
CMP PX2K-75S Barrier Glands Exd Flameproof (ATEX) Cable Glands
CMP PX2K Cable Glands (Barrier Glands Exd Flameproof with ATEX Certification for Hazardous Areas)
Cable Gland Size 75S (M75) 2.1/2" NPT Entry Thread Standard, 3" NPT Optional
Cable Gland Suits Cable Diameters 59.0mm-72.1mm
CMP PX2K barrier cable glands are ATEX certified and suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound filled barrier glands for cable terminations within ATEX areas are supplied with a "universal" reversible armour ring to suit all types of armoured cables - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. Barrier cable glands provide a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The CMP PX2K cable gland provides a mechanical cable retention and electrical continuity via the cable armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal cable clamping ring arrangement allows the cable to be easily disconnected from the electrical equipment and easily re-connected. This cable gland feature facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access.
Cable Glands are suitable for following cable types - Wire Braid Armour, Single Steel Wire Armour (SWA), Screened Flexible Wire Braid (eg CY or SY), Steel Tape Armour (STA), Pliable Wire Armour (PWA)
Cable Sealing Area - Inner Compound Barrier and Cable Outer Sheath
CMP PX2K cable glands with offshore and marine approvals including Lloyds, DNV and ABS are available - LSF cable gland shrouds available for low smoke and fume cable terminations.
CMP Barrier Glands (Explosion Proof Cable Glands)
Explosion proof barrier glands provide a flameproof compound seal, outer sheath seal and universal armour clamp for steel wire armoured (SWA) and galvanised steel braided (GSWB) cable termination. A barrier gland is an Ex d cable gland incorporating a compound filled chamber sealing around the individual cores of the cable to maintain the flameproof integrity of the electrical equipment. A barrier gland must be used where the standard method of cable glanding (elastomeric seals) an Ex cable entry is considered unlikely to maintain the integrity of flameproof electrical equipment and contain an explosion within the electrical enclosures due either to cable construction or degree of explosion risk.
CMP PX2K-90 Barrier Glands Exd Flameproof (ATEX) Cable Glands
CMP PX2K Cable Glands (Barrier Glands Exd Flameproof with ATEX Certification for Hazardous Areas)
Cable Gland Size 90 (M90) 3" NPT Entry Thread Standard, 3.1/2" NPT Optional
Cable Gland Suits Cable Diameters 76.2mm-90.4mm
CMP PX2K barrier cable glands are ATEX certified and suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound filled barrier glands for cable terminations within ATEX areas are supplied with a "universal" reversible armour ring to suit all types of armoured cables - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. Barrier cable glands provide a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The CMP PX2K cable gland provides a mechanical cable retention and electrical continuity via the cable armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal cable clamping ring arrangement allows the cable to be easily disconnected from the electrical equipment and easily re-connected. This cable gland feature facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access.
Cable Glands are suitable for following cable types - Wire Braid Armour, Single Steel Wire Armour (SWA), Screened Flexible Wire Braid (eg CY or SY), Steel Tape Armour (STA), Pliable Wire Armour (PWA)
Cable Sealing Area - Inner Compound Barrier and Cable Outer Sheath
CMP PX2K cable glands with offshore and marine approvals including Lloyds, DNV and ABS are available - LSF cable gland shrouds available for low smoke and fume cable terminations.
CMP PX2K-32 Barrier Glands Exd Flameproof (ATEX) Cable Glands
CMP PX2K Cable Glands (Barrier Glands Exd Flameproof with ATEX Certification for Hazardous Areas)
Cable Gland Size 32 (M32) 1" NPT Entry Thread Standard, 1.1/4" NPT Optional
Cable Gland Suits Cable Diameters 23.7mm-33.9mm
CMP PX2K barrier cable glands are ATEX certified and suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound filled barrier glands for cable terminations within ATEX areas are supplied with a "universal" reversible armour ring to suit all types of armoured cables - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. Barrier cable glands provide a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The CMP PX2K cable gland provides a mechanical cable retention and electrical continuity via the cable armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal cable clamping ring arrangement allows the cable to be easily disconnected from the electrical equipment and easily re-connected. This cable gland feature facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access.
Cable Glands are suitable for following cable types - Wire Braid Armour, Single Steel Wire Armour (SWA), Screened Flexible Wire Braid (eg CY or SY), Steel Tape Armour (STA), Pliable Wire Armour (PWA)
Cable Sealing Area - Inner Compound Barrier and Cable Outer Sheath
CMP PX2K cable glands with offshore and marine approvals including Lloyds, DNV and ABS are available - LSF cable gland shrouds available for low smoke and fume cable terminations.
CMP PX2K-25S Barrier Glands Exd Flameproof (ATEX) Cable Glands
CMP PX2K Cable Glands (Barrier Glands Exd Flameproof with ATEX Certification for Hazardous Areas)
Cable Gland Size 25S (M25) 3/4" NPT Entry Thread Standard, 1" NPT Optional
Cable Gland Suits Cable Diameters 14.0mm-22.0mm
CMP PX2K barrier cable glands are ATEX certified and suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound filled barrier glands for cable terminations within ATEX areas are supplied with a "universal" reversible armour ring to suit all types of armoured cables - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. Barrier cable glands provide a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The CMP PX2K cable gland provides a mechanical cable retention and electrical continuity via the cable armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal cable clamping ring arrangement allows the cable to be easily disconnected from the electrical equipment and easily re-connected. This cable gland feature facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access.
Cable Glands are suitable for following cable types - Wire Braid Armour, Single Steel Wire Armour (SWA), Screened Flexible Wire Braid (eg CY or SY), Steel Tape Armour (STA), Pliable Wire Armour (PWA)
Cable Sealing Area - Inner Compound Barrier and Cable Outer Sheath
CMP PX2K cable glands with offshore and marine approvals including Lloyds, DNV and ABS are available - LSF cable gland shrouds available for low smoke and fume cable terminations.
CMP PX2K-50 Barrier Glands Exd Flameproof (ATEX) Cable Glands
CMP PX2K Cable Glands (Barrier Glands Exd Flameproof with ATEX Certification for Hazardous Areas)
Cable Gland Size 50 (M50) 2" NPT Entry Thread Standard, 2.1/2" NPT Optional
Cable Gland Suits Cable Diameters 40.4mm-53.1mm
CMP PX2K barrier cable glands are ATEX certified and suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound filled barrier glands for cable terminations within ATEX areas are supplied with a "universal" reversible armour ring to suit all types of armoured cables - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. Barrier cable glands provide a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The CMP PX2K cable gland provides a mechanical cable retention and electrical continuity via the cable armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal cable clamping ring arrangement allows the cable to be easily disconnected from the electrical equipment and easily re-connected. This cable gland feature facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access.
Cable Glands are suitable for following cable types - Wire Braid Armour, Single Steel Wire Armour (SWA), Screened Flexible Wire Braid (eg CY or SY), Steel Tape Armour (STA), Pliable Wire Armour (PWA)
Cable Sealing Area - Inner Compound Barrier and Cable Outer Sheath
CMP PX2K cable glands with offshore and marine approvals including Lloyds, DNV and ABS are available - LSF cable gland shrouds available for low smoke and fume cable terminations.
CMP PX2K-75 Barrier Glands Exd Flameproof (ATEX) Cable Glands
CMP PX2K Cable Glands (Barrier Glands Exd Flameproof with ATEX Certification for Hazardous Areas)
Cable Gland Size 75 (M75) 3" NPT Entry Thread Standard, 3.1/2" NPT Optional
Cable Gland Suits Cable Diameters 66.7mm-78.5mm
CMP PX2K barrier cable glands are ATEX certified and suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound filled barrier glands for cable terminations within ATEX areas are supplied with a "universal" reversible armour ring to suit all types of armoured cables - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. Barrier cable glands provide a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The CMP PX2K cable gland provides a mechanical cable retention and electrical continuity via the cable armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal cable clamping ring arrangement allows the cable to be easily disconnected from the electrical equipment and easily re-connected. This cable gland feature facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access.
Cable Glands are suitable for following cable types - Wire Braid Armour, Single Steel Wire Armour (SWA), Screened Flexible Wire Braid (eg CY or SY), Steel Tape Armour (STA), Pliable Wire Armour (PWA)
Cable Sealing Area - Inner Compound Barrier and Cable Outer Sheath
CMP PX2K cable glands with offshore and marine approvals including Lloyds, DNV and ABS are available - LSF cable gland shrouds available for low smoke and fume cable terminations.
CMP PX2K-25 Barrier Glands Exd Flameproof (ATEX) Cable Glands
This document provides technical specifications for the CMP PX2K cable gland, including:
- It is suitable for use in hazardous zones 1, 2, 21, and 22, and provides flameproof, increased safety, and restricted breathing protection.
- It comes in a kit with two detachable armor cones for different cable types and allows easy connection and disconnection of cables for maintenance.
- It provides details on material composition, temperature rating, ingress protection, approvals, and available sizes to accommodate different cable diameters.
CMP PX2K-63S Barrier Glands Exd Flameproof (ATEX) Cable Glands
CMP PX2K Cable Glands (Barrier Glands Exd Flameproof with ATEX Certification for Hazardous Areas)
Cable Gland Size 63S (M63) 2" NPT Entry Thread Standard, 2.1/2" NPT Optional
Cable Gland Suits Cable Diameters 45.6mm-59.4mm
CMP PX2K barrier cable glands are ATEX certified and suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound filled barrier glands for cable terminations within ATEX areas are supplied with a "universal" reversible armour ring to suit all types of armoured cables - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. Barrier cable glands provide a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The CMP PX2K cable gland provides a mechanical cable retention and electrical continuity via the cable armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal cable clamping ring arrangement allows the cable to be easily disconnected from the electrical equipment and easily re-connected. This cable gland feature facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access.
Cable Glands are suitable for following cable types - Wire Braid Armour, Single Steel Wire Armour (SWA), Screened Flexible Wire Braid (eg CY or SY), Steel Tape Armour (STA), Pliable Wire Armour (PWA)
Cable Sealing Area - Inner Compound Barrier and Cable Outer Sheath
CMP PX2K cable glands with offshore and marine approvals including Lloyds, DNV and ABS are available - LSF cable gland shrouds available for low smoke and fume cable terminations.
Peppers Cable Glands Ltd - Elastomeric Seal Cable Glands, Flat Cable Glands, ...
Peppers Cable Glands Ltd - Elastomeric Seal Cable Glands, Flat Cable Glands, ...Thorne & Derrick International
Peppers has an extensive range of international approvals incorporating ATEX, IECEx, UL, CSA, GOST, INMETRO &
NEPSI as well as marine type approvals by ABS (American Bureau of Shipping), RMRS (Russian Maritime) & Lloyd’s Register. Our range of approved products are designed and tested for use in Ex d, Ex e, Ex nR and Ex t hazardous area protection concepts.
Peppers’ range of glands incorporate some unique engineering features. The CR gland for armoured cable features a single orientation clamping system, “CROCLOCK®” allowing the clamping of all armour types with no mistakes being possible during installation. The advertising slogan “No reversible Components – No Mistakes” sums up this benefit. Due to ingenious design features Deluge is achieved without the use of additional sealing devices.
Peppers’ barrier glands incorporate unique features that reduce installation times by using the Peppers T-1000 compound, which enables the conductors to be terminated within the equipment after one hour. At four hours, the compound chamber may be inspected and the equipment can be energized. Our innovative barrier chamber provides a cable acceptance that is on average 17% larger than other barrier gland designs allowing the use of smaller glands thereby significantly reducing cost.
Glands can be supplied in various materials including brass, aluminium, stainless steel and polyamide. We offer plating options for corrosion protection, including nickel, tin and zinc. Peppers also supply accessories, which include a comprehensive range of certified thread adaptors, reducers, stopping plugs and breather drains.Earth Bonding Kits - 3M
This document describes various earthing kits and accessories for providing electrical continuity and bonding across cable joints. It discusses 3M's AC series armour continuity kits which contain contact rings and steel bands for inline, tee, or branch cable configurations. It also mentions constant force springs, earth bonding kits, copper braid, and shielding/grounding tape that can be used for bonding cable armour wires and providing a fault current path. Sizes and applications are provided for each product.
Similar to Explosion Proof Cable Glands - Prysmian Barrier Glands (424TW) for SWA Steel Wire Armour Cable (20)
Ramp Heating - Thermon KSR-2 Heat Tracing Cables (Self-Regulating)
Ramp Heating - Thermon KSR-2 Heat Tracing Cables (Self-Regulating)
Prysmian Cable Cleats - Bicon Multicleats & Bicon Multistraps (Stainless Steel)
Prysmian Cable Cleats - Bicon Multicleats & Bicon Multistraps (Stainless Steel)
CMP PX2K-20S Barrier Glands Exd Flameproof (ATEX) Cable Glands
CMP PX2K-20S Barrier Glands Exd Flameproof (ATEX) Cable Glands
CMP PX2K & PXSS2K Barrier Cable Glands, Flameproof Exd and Increased Safety Exe
CMP PX2K & PXSS2K Barrier Cable Glands, Flameproof Exd and Increased Safety Exe
CMP PX2K-40 Barrier Glands Exd Flameproof (ATEX) Cable Glands
CMP PX2K-40 Barrier Glands Exd Flameproof (ATEX) Cable Glands
CMP PX2K-20S/16 Barrier Glands Exd Flameproof (ATEX) Cable Glands
CMP PX2K-20S/16 Barrier Glands Exd Flameproof (ATEX) Cable Glands
CMP PX2K-50S Barrier Glands Exd Flameproof (ATEX) Cable Glands
CMP PX2K-50S Barrier Glands Exd Flameproof (ATEX) Cable Glands
CMP PX2K-20 Barrier Glands Exd Flameproof (ATEX) Cable Glands
CMP PX2K-20 Barrier Glands Exd Flameproof (ATEX) Cable Glands
CMP PX2K-63 Barrier Glands Exd Flameproof (ATEX) Cable Glands
CMP PX2K-63 Barrier Glands Exd Flameproof (ATEX) Cable Glands
CMP PX2K-75S Barrier Glands Exd Flameproof (ATEX) Cable Glands
CMP PX2K-75S Barrier Glands Exd Flameproof (ATEX) Cable Glands
CMP PX2K-90 Barrier Glands Exd Flameproof (ATEX) Cable Glands
CMP PX2K-90 Barrier Glands Exd Flameproof (ATEX) Cable Glands
CMP PX2K-32 Barrier Glands Exd Flameproof (ATEX) Cable Glands
CMP PX2K-32 Barrier Glands Exd Flameproof (ATEX) Cable Glands
CMP PX2K-25S Barrier Glands Exd Flameproof (ATEX) Cable Glands
CMP PX2K-25S Barrier Glands Exd Flameproof (ATEX) Cable Glands
CMP PX2K-50 Barrier Glands Exd Flameproof (ATEX) Cable Glands
CMP PX2K-50 Barrier Glands Exd Flameproof (ATEX) Cable Glands
CMP PX2K-75 Barrier Glands Exd Flameproof (ATEX) Cable Glands
CMP PX2K-75 Barrier Glands Exd Flameproof (ATEX) Cable Glands
CMP PX2K-25 Barrier Glands Exd Flameproof (ATEX) Cable Glands
CMP PX2K-25 Barrier Glands Exd Flameproof (ATEX) Cable Glands
CMP PX2K-63S Barrier Glands Exd Flameproof (ATEX) Cable Glands
CMP PX2K-63S Barrier Glands Exd Flameproof (ATEX) Cable Glands
Peppers Cable Glands Ltd - Elastomeric Seal Cable Glands, Flat Cable Glands, ...
Peppers Cable Glands Ltd - Elastomeric Seal Cable Glands, Flat Cable Glands, ...
More from Thorne & Derrick International
Isolation procedures for safe working on electrical systems and equipment by ...
Isolation procedures for safe working on electrical systems and equipment by ...Thorne & Derrick International
Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment
This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment.
You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically.
THE RULES OF SAFE ISOLATION ARE:
Obtain permission to start work (a Permit may be required in some situations)
Identify the source(s) of supply using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Isolate the supply(s)
Secure the isolation
Prove the system/equipment is DEAD using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Put up warning signs to tell other people that the electrical installation has been isolated
Once the system/equipment is proved DEAD, work can begin
Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical EqptThorne & Derrick International
Thorne & Derrick International are specialist distributors of low, medium, and high voltage cable installation, jointing, substation, and electrical equipment. They have over 30 years of experience and stock over 100,000 products from over 100 brands. Their product range includes cable joints, terminations, tools, accessories, distribution equipment, and safety products for voltages up to 132kV.The Children North East Annual Golf Day Wednesday 9th May 2018
The document advertises the Children North East Annual Golf Day fundraising event to be held on May 9th, 2018 at Close House golf course in Northumberland. The event will include a shotgun start at 2pm for teams of four playing in a Stableford scoring competition. The £490 entry fee per team includes breakfast, a two course meal after play, and goodie bags. Proceeds will benefit Children North East, a charity supporting children in the Newcastle region.
CATU Electrical Safety Catalogue
This document provides a catalogue of products from SICAME GROUP for electrical safety. It begins by emphasizing the importance of electrical safety for professionals working in the electrical industry. The catalogue then outlines the company's commitment to supporting customers through new products designed by their teams, an updated catalogue focusing on product functions and uses, and new educational tools like guidance documents. The bulk of the document consists of the catalogue content organized into sections covering personal protective equipment, locking, signaling, low voltage test and measurement, low voltage earthing systems, low voltage live working tools, medium voltage substation equipment, medium voltage equipment, high voltage lines and switchgear equipment, and earthing connections. Each section lists and provides brief descriptions of the various safety products
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-AThorne & Derrick International
1) The document provides installation instructions for heatshrink termination of 3 core polymeric cables with voltages ranging from 7.2kV to 36kV. It describes the steps for preparing the cable, installing stress control tapes and tubes, cable lugs, and rain sheds.
2) Key steps include removing the cable sheath and screens, applying stress control tape, installing cable lugs and boots, and shrinking tubes onto the assembly. Proper distances must be maintained for phase clearance and bending radii.
3) Outdoor terminations require additional rain sheds installed from the bottom up at specified distances between the anti-track tube and shed edges. Indoor distances between phases and grounds are also outlined.THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...Thorne & Derrick International
THORNE & DERRICK based in the UK are international distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment.
Since 1985, T&D have established an international reputation based on SERVICE | INTEGRITY | TRUST.
Contact us for 3M, ABB, Alroc, AN Wallis, CATU, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform , Furse, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...Thorne & Derrick International
The document provides technical specifications for EJB series explosion proof enclosures made of galvanized carbon steel. The enclosures have an IP rating of IP65, IP66, or IP67 and an operating temperature range of -50°C to +60°C. They offer explosion protection of Ex d IIB or IIB+H2 and are suitable for indoor and outdoor use in hazardous industrial areas. The enclosures can house various electrical and electronic components and accessories.Roxtec Cable Transit - B Frame Dimensional Drawing
Roxtec Cable Transit - B Frame Dimensional Drawing
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
This certificate of attendance awards Adam Rowe and Michael Wenglorz for successfully completing a SIL (Safety Integrity Level) training seminar held by PEPPERL+FUCHS GB LTD on November 7th, 2016.
T&D Experts In Equipment For Explosive Atmospheres
Thorne & Derrick were established in 1985 and are now one of the largest specialist distributors and worldwide exporters of equipment for explosive atmospheres. They stock over 100,000 products from over 100 brands for industries such as oil & gas, mining, manufacturing, and more. Thorne & Derrick provide hazardous area lighting, heating, sensors, detectors, valves, cables, and other equipment certified for explosive atmospheres. They also offer technical support, international delivery, and over 30 years of experience in serving hazardous area applications.
Ultrasonic Flow Meters - Customer Specification Demand
This document is an application datasheet for flow measurement devices. It requests contact and process information from customers. It asks for details about the application environment and pipe parameters. It also requests information on process parameters like temperature, pressure, and flow rates. Finally, it inquires about desired measurement configuration including units of measurement, data logging, power supply, and electrical and communication interfaces.
Emtelle Fibre Optic Cables - Product Catalogue 2016
This document provides information on Emtelle fibre optic cables, including:
- An overview of Emtelle as a leading global manufacturer of blown fibre and ducted network solutions.
- Descriptions of different cable types including Direct Install, Direct Buried, Aerial, and more.
- Specifications for various cable models including fibre count options, dimensions, tensile strength and other test standards.
Thorne & Derrick Process Heating Brochure 2016
Thorne & Derrick provide electrical heating solutions for industrial and hazardous area applications. They have over 30 years of experience in process heating and specialize in frost protection and winterization packages. They offer a wide range of electrical heating equipment for hazardous areas, including portable air heaters certified for use in explosive atmospheres. Their product range and engineering expertise help customers solve heating challenges across various industries.
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
Ripley Utility Tool Cable Preparation Tools
The document provides information on tools for preparing electric utility distribution and transmission cables. It includes tools for stripping insulation from secondary distribution cables, mid-span stripping of overhead primary distribution cables, insulation stripping and jacket stripping for underground cables, removing insulation shields from underground and transmission cables, pencilling transmission cables, and other specialty distribution tools. Tables provide part numbers and specifications for various cable end strippers and other tools to prepare different cable types.
RIDGID micro CD100 Combustible Gas Detector
The document describes the RIDGID micro CD-100 combustible gas leak detector. It can quickly identify the presence of combustible gases with a flexible 41 cm probe. It is designed to detect gases like methane, propane, and more. The micro CD-100 has adjustable sensitivity settings and Tri-Mode Detection that provides alerts through visual, audible or vibration signals. It is listed as catalog number 36163 and weighs 0.45 kg.
Itron Fact Sheet
Itron is a leading technology company dedicated to measuring, managing, and analyzing energy and water resources. It provides comprehensive solutions including meters, communication systems, software, and consulting services to over 8,000 customers in more than 100 countries. Itron employs thousands of people globally and invests over 8.5% of its $1.9 billion annual revenue in research and development.
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...Thorne & Derrick International
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration, Air Conditioning & Heat Pumps Technical Options Committee’Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec SheetThorne & Derrick International
The FiloSeal+HD is a duct sealing system that uses hexagonal tubes and a flexible silicon-based sealant to seal cable configurations and pipes within conduits. It provides resistance to up to 2 bars of pressure and can withstand pulling forces of 100kg on sealed cables. The sealant is easily applied and cures with air, providing high levels of gas and water tightness. The system allows for easy addition or removal of cables or pipes as needed.More from Thorne & Derrick International (20)
Isolation procedures for safe working on electrical systems and equipment by ...
Isolation procedures for safe working on electrical systems and equipment by ...
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
The Children North East Annual Golf Day Wednesday 9th May 2018
The Children North East Annual Golf Day Wednesday 9th May 2018
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Roxtec Cable Transit - B Frame Dimensional Drawing
Roxtec Cable Transit - B Frame Dimensional Drawing
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
T&D Experts In Equipment For Explosive Atmospheres
T&D Experts In Equipment For Explosive Atmospheres
Ultrasonic Flow Meters - Customer Specification Demand
Ultrasonic Flow Meters - Customer Specification Demand
Emtelle Fibre Optic Cables - Product Catalogue 2016
Emtelle Fibre Optic Cables - Product Catalogue 2016
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Recently uploaded
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
ここ3000字までしか入らないけどタイトルの方がたくさん文字入ると思います。
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.Climate Impact of Software Testing at Nordic Testing Days
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
Large Language Model (LLM) and it’s Geospatial Applications
Large Language Model (LLM) and it’s Geospatial Applications.
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
Communications Mining Series - Zero to Hero - Session 1
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
Building RAG with self-deployed Milvus vector database and Snowpark Container...
This talk will give hands-on advice on building RAG applications with an open-source Milvus database deployed as a docker container. We will also introduce the integration of Milvus with Snowpark Container Services.
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Introducing Milvus Lite: Easy-to-Install, Easy-to-Use vector database for you...
Join us to introduce Milvus Lite, a vector database that can run on notebooks and laptops, share the same API with Milvus, and integrate with every popular GenAI framework. This webinar is perfect for developers seeking easy-to-use, well-integrated vector databases for their GenAI apps.
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
Recently uploaded (20)
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
Climate Impact of Software Testing at Nordic Testing Days
Climate Impact of Software Testing at Nordic Testing Days
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
Large Language Model (LLM) and it’s Geospatial Applications
Large Language Model (LLM) and it’s Geospatial Applications
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Communications Mining Series - Zero to Hero - Session 1
Communications Mining Series - Zero to Hero - Session 1
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Building RAG with self-deployed Milvus vector database and Snowpark Container...
Building RAG with self-deployed Milvus vector database and Snowpark Container...
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
Introducing Milvus Lite: Easy-to-Install, Easy-to-Use vector database for you...
Introducing Milvus Lite: Easy-to-Install, Easy-to-Use vector database for you...
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Explosion Proof Cable Glands - Prysmian Barrier Glands (424TW) for SWA Steel Wire Armour Cable
- 1. BARR-W EEx d IIC Brass Barrier Gland 424TW Series Explosion Proof Glands Application Features & Benefits > For steel wire armoured cables > Brass indoor and outdoor cable gland for use in Zone 1 and Zone 2 hazardous areas > Suitable for circular, galvanised steel single wire armour cables with extruded polymeric oversheath and extruded or taped bedding > Achieves IP66 seal onto cable and to enclosure with suitable sealing washer or thread sealant > Provides mechanical cable retention and electrical continuity through the armour wire termination > Suitable for most climatic conditions – weatherproof & waterproof > Nickel plated versions also available > Matching accessory kits available Technical Data > Certified II 2GD, EEx e II & EEx d IIC under ATEX directive 94/9/EC > Certificate number Sira04ATEX1080X > Service temperature range -60°C to +90°C > May be used in: - Zones 0, 1 & 2 with EEx ia IIA, B & C equipment - Zones 1 & 2 with EEx ib IIA, B & C equipment - Zones 1 & 2 with EEx d IIA, B & C equipment with any volume - Zones 1 & 2 with EEx e II equipment - Zones 1 & 2 with EEx p II equipment - Zone 2 with EEx nA II equipment - Zone 2 with EEx nR II equipment - Zones 21 & 22 with EEx tD II equipment Ref: BARRW/04/07 Prysmian Cables & Systems Limited, Components Unit, Oak Road, Wrexham Industrial Estate, Wrexham, LL13 9HP, UK Commercial Enquiries, Tel +44 (0) 845 767 8345, Fax: +44 (0) 23 8029 5465 www.prysmian.co.uk
- 2. BARR-W EEx d IIC Brass Barrier Gland F B A C E D Gland Details Gland References & Thread Sizes Basic Size Metric Cable Dimensions mm NPT Max. Dia. Over Conductors Design No. Thread Size * Design No. Thread Size ≠ 20S 424TW52 M20 × 1.5 424TW02 ½” - 14 NPT 11.0 20 424TW53 M20 × 1.5 424TW03 ½” - 14 NPT 11.0 25 424TW55 M25 × 1.5 424TW05 ¾” - 14 NPT 32 424TW56 M32 × 1.5 424TW06 1” - 11½ NPT 40 424TW57 M40 × 1.5 424TW07 1¼” - 11½ NPT 50 424TW59 M50 × 1.5 424TW09 2” - 11½ NPT 37.1 63 424TW61 M63 × 1.5 424TW11 2½” - 8 NPT 48.4 75 424TW63 M75 × 1.5 424TW13 3” - 8 NPT 58.6 85 424TW64 M85 × 2 424TW14 3” - 8 NPT Max. No. of Conductors 65.8 Inner Sheath Dia. ‘A’ Gland Dimensions mm Overall Dia. ‘B’ 67 34.0 30.5 64 34.0 30.5 1.25 / 1.6 65 42.2 37.6 1.6 / 2.0 77 53.6 47.3 39.9 1.6 / 2.0 77 61.5 56.4 36.0 52.6 2.0 / 2.5 84 77.2 70.1 46.5 65.3 2.5 90 87.4 80.0 58.0 78.0 2.5 / 3.15 96 109.2 98.8 68.0 88.0 2.5 / 3.15 108 126.0 115.0 Min Max 30 — 30 — 12.5 8.0 15.8 0.9 / 1.4 12.5 11.7 20.8 0.9 / 1.4 16.0 42 11.5 18.0 22.1 60 17.0 25.0 17.0 27.2 19.0 33.5 28.2 100 24.0 31.5 26.5 200 30.0 41.5 400 40.0 54.0 400 53.0 65.5 400 60.0 74.0 Prysmian Cables & Systems Limited, Components Unit, Oak Road, Wrexham Industrial Estate, Wrexham, LL13 9HP, UK Commercial Enquiries, Tel +44 (0) 845 767 8345, Fax: +44 (0) 23 8029 5465 www.prysmian.co.uk Hexagon Size A/F ‘F’ Max NPT thread lengths comply with new UL2225 requirements Ref: BARRW/04/07 Approx. Length ‘D’ A/C ‘E’ Min * 1.5mm Pitch threads are supplied 15mm long, 2mm pitch threads are supplied 20mm long ≠ Armour Wire Dia. ‘C’