CMP PX2K Cable Glands (Barrier Glands Exd Flameproof with ATEX Certification for Hazardous Areas)
Cable Gland Size 20S (M20) 1/2" NPT Entry Thread Standard, 3/4" NPT Optional
Cable Gland Suits Cable Diameters 9.5mm-15.9mm
CMP PX2K barrier cable glands are ATEX certified and suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound filled barrier glands for cable terminations within ATEX areas are supplied with a "universal" reversible armour ring to suit all types of armoured cables - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. Barrier cable glands provide a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The CMP PX2K cable gland provides a mechanical cable retention and electrical continuity via the cable armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal cable clamping ring arrangement allows the cable to be easily disconnected from the electrical equipment and easily re-connected. This cable gland feature facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access.
Cable Glands are suitable for following cable types - Wire Braid Armour, Single Steel Wire Armour (SWA), Screened Flexible Wire Braid (eg CY or SY), Steel Tape Armour (STA), Pliable Wire Armour (PWA)
Cable Sealing Area - Inner Compound Barrier and Cable Outer Sheath
CMP PX2K cable glands with offshore and marine approvals including Lloyds, DNV and ABS are available - LSF cable gland shrouds available for low smoke and fume cable terminations.
CMP PX2K Cable Glands (Barrier Glands Exd Flameproof with ATEX Certification for Hazardous Areas)
Cable Gland Size 20S/16 (M20) 1/2" NPT Entry Thread Standard, 3/4" NPT Optional
Cable Gland Suits Cable Diameters 6.1mm-11.5mm
CMP PX2K barrier cable glands are ATEX certified and suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound filled barrier glands for cable terminations within ATEX areas are supplied with a "universal" reversible armour ring to suit all types of armoured cables - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. Barrier cable glands provide a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The CMP PX2K cable gland provides a mechanical cable retention and electrical continuity via the cable armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal cable clamping ring arrangement allows the cable to be easily disconnected from the electrical equipment and easily re-connected. This cable gland feature facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access.
Cable Glands are suitable for following cable types - Wire Braid Armour, Single Steel Wire Armour (SWA), Screened Flexible Wire Braid (eg CY or SY), Steel Tape Armour (STA), Pliable Wire Armour (PWA)
Cable Sealing Area - Inner Compound Barrier and Cable Outer Sheath
CMP PX2K cable glands with offshore and marine approvals including Lloyds, DNV and ABS are available - LSF cable gland shrouds available for low smoke and fume cable terminations.
Prysmian Group/Draka is world leader in the energy and telecom cables and systems industry. With sales ofsome €8 billion in 2012, more than 20,000 employees across 50 countries and 91 plants , the Group is strongly positioned in high-tech markets and offers the widest range of products, services, technologies and know-how
Prysmian Cables & Systems is the UK's largest domestic manufacturer of energy and telecommunications cables and systems to service home and export markets.
As a successful international cable manufacturer nobody knows more about cable than Draka. Through a continual programme of research and development, Draka lead the way with a world beating range of premium quality cables that meet and often exceed British Standards and are fully BASEC approved.
Draka is a major supplier to the construction industry, with a complete range of housewiring and low voltage supply cables, for use in domestic premises, commercial office developments and public buildings, such as retail business parks, hospitals and sports complexes. In addition to this general range of energy cables, the company is a market leader in the production of fire retardant cables and addresses the needs of a host of specific, individual markets and applications.
400 Series Interface C Compact Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface C bushings on switchgear and transformers.
Nexans Euromold provide high voltage cable accessories to suit the 7 main bushing interfaces : A, B, C (Compact), C (Symmetrical), D, E and F.
Nexans Euromold cable joints, cable terminations, epoxy bushings, angled (elbow) and straight plug-in or bolted separable connectors for connecting, jointing and terminating high voltage cables.
CMP PX2K Cable Glands (Barrier Glands Exd Flameproof with ATEX Certification for Hazardous Areas)
Cable Gland Size 20S/16 (M20) 1/2" NPT Entry Thread Standard, 3/4" NPT Optional
Cable Gland Suits Cable Diameters 6.1mm-11.5mm
CMP PX2K barrier cable glands are ATEX certified and suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound filled barrier glands for cable terminations within ATEX areas are supplied with a "universal" reversible armour ring to suit all types of armoured cables - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. Barrier cable glands provide a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The CMP PX2K cable gland provides a mechanical cable retention and electrical continuity via the cable armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal cable clamping ring arrangement allows the cable to be easily disconnected from the electrical equipment and easily re-connected. This cable gland feature facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access.
Cable Glands are suitable for following cable types - Wire Braid Armour, Single Steel Wire Armour (SWA), Screened Flexible Wire Braid (eg CY or SY), Steel Tape Armour (STA), Pliable Wire Armour (PWA)
Cable Sealing Area - Inner Compound Barrier and Cable Outer Sheath
CMP PX2K cable glands with offshore and marine approvals including Lloyds, DNV and ABS are available - LSF cable gland shrouds available for low smoke and fume cable terminations.
Prysmian Group/Draka is world leader in the energy and telecom cables and systems industry. With sales ofsome €8 billion in 2012, more than 20,000 employees across 50 countries and 91 plants , the Group is strongly positioned in high-tech markets and offers the widest range of products, services, technologies and know-how
Prysmian Cables & Systems is the UK's largest domestic manufacturer of energy and telecommunications cables and systems to service home and export markets.
As a successful international cable manufacturer nobody knows more about cable than Draka. Through a continual programme of research and development, Draka lead the way with a world beating range of premium quality cables that meet and often exceed British Standards and are fully BASEC approved.
Draka is a major supplier to the construction industry, with a complete range of housewiring and low voltage supply cables, for use in domestic premises, commercial office developments and public buildings, such as retail business parks, hospitals and sports complexes. In addition to this general range of energy cables, the company is a market leader in the production of fire retardant cables and addresses the needs of a host of specific, individual markets and applications.
400 Series Interface C Compact Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface C bushings on switchgear and transformers.
Nexans Euromold provide high voltage cable accessories to suit the 7 main bushing interfaces : A, B, C (Compact), C (Symmetrical), D, E and F.
Nexans Euromold cable joints, cable terminations, epoxy bushings, angled (elbow) and straight plug-in or bolted separable connectors for connecting, jointing and terminating high voltage cables.
900 Series Interface F Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface F bushings on switchgear and transformers up to 42kV. Nexans 944TB Tee Connectors provide high voltage cable terminations using separable tee shape connectors :
Nexans 944TB/G - 12kV 2500Amp 70-80sqmm Conductors
Nexans K944TB/G - 24kV 2500Amp 16-800sqmm Conductors
Nexans M944TB/G - 36kV 2500Amp 35-800sqmm Conductors
Nexans P944TB/G - 42kV 1250Amp 50-800sqmm Conductors
400 Series Interface B Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface B bushings on switchgear and transformers.
Nexans Euromold provide high voltage cable accessories to suit the 7 main bushing interfaces : A, B, C (Compact), C (Symmetrical), D, E and F.
Nexans Euromold cable joints, cable terminations, epoxy bushings, angled (elbow) and straight plug-in or bolted separable connectors for connecting, jointing and terminating high voltage cables.
1.2V Analog I/O with full local ESD protection for TSMC 65nm technologySofics
Sofics has verified its TakeCharge ESD protection clamps on technology nodes between 0.25um CMOS down to 5nm across various fabs and foundries. The ESD clamps are silicon and product proven in more than 4500 mass produced IC-products. The cells provide competitive advantage through improved yield, reduced silicon footprint and enable advanced multimedia and wireless interfaces like HDMI, USB 3.0, SATA, WIFI, GPS and Bluetooth.
The Analog I/O clamp described in this document can be used for 1.2V pads in the TSMC 65nm CMOS technology. It has a full local ESD protection and integrated power clamp. The bus resistance is thus not important for IO related ESD stress.
Tsmc65 1v2 full local protection analog io + cdmSofics
Sofics has verified its TakeCharge ESD protection clamps on technology nodes between 0.25um CMOS down to 5nm across various fabs and foundries. The ESD clamps are silicon and product proven in more than 4500 mass produced IC-products. The cells provide competitive advantage through improved yield, reduced silicon footprint and enable advanced multimedia and wireless interfaces like HDMI, USB 3.0, SATA, WIFI, GPS and Bluetooth.
The Analog I/O clamp described in this document can be used for 1.2V pads in the TSMC 65nm CMOS technology. It has a full local ESD protection and integrated power clamp. The bus resistance is thus not important for IO related ESD stress.
The cell also includes a CDM secondary protection.
1.2V core power clamp for TSMC 65nm technologySofics
Sofics has verified its TakeCharge ESD protection clamps on technology nodes between 0.25um CMOS down to 5nm across various fabs and foundries. The ESD clamps are silicon and product proven in more than 4500 mass produced IC-products. The cells provide competitive advantage through improved yield, reduced silicon footprint and enable advanced multimedia and wireless interfaces like HDMI, USB 3.0, SATA, WIFI, GPS and Bluetooth.
The ESD clamp described in this document protects 1.2V core domains in TSMC 65nm CMOS technology.
CMP Triton CDS Type T3CDS Cable Glands are Triple Certified Flameproof (Type 'd'), Increased Safety (Type 'e') and Restricted Breathing (Type ‘nR’) indoor and outdoor cable glands for use in Zone 1, Zone 2, Zone 21 and Zone 22 hazardous areas.
CMP Triton cable glands are compatible with all types of armoured cable providing a flameproof seal on the cable inner bedding and an environmental seal on the cable outer sheath with IP68 rating.
The CMP Triton CDS cable gland is suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2 , Zone 21 & Zone 22.
CMP Triton T3CDS Flameproof & Deluge Proof Cable Glands - Specification
CMP Triton cable glands utilise a unique Compensating Displacement Seal (CDS) system which provides full compatibility with Restricted Breathing equipment that rely upon flammable gases being excluded from the enclosure.
The CMP Triton cable gland provides mechanical cable retention and electrical continuity via armour wire termination. A reversible armour cone and CMP AnyWay universal clamping ring arrangement allows the cable to be easily disconnected from the equipment for maintenance and change out etc., and re-connected with ease. This feature also facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access. Separate tightening actions for the inner compensating displacement seal (CDS) system and the armour termination affords maximum control over the pressure applied to the cable inner bedding. The CMP Triton CDS Cable Gland is suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2 , Zone 21 & Zone 22 provided always that the prevailing code of practice for selection, installation and maintenance is observed, e.g. IEC 60079-14.
High Voltage Cable Terminations (SWA) with CMP Zen Insulated Cable Glands & Cast Integral Earth Lug
CMP Zen Glands - Protect Against Short Circuit Earth Fault Currents
CMP CIEL Cast Integral Earth Lug - Aluminium HV Cable Glands
High voltage single core power cables (3.3kV, 6.6kV, 11kV, 33kV) can generate high fault current ratings via aluminium wire armours (AWA) where the actual fault current may exceed that of the standard CMP earth tag - it is vital for low and high voltage electrical safety to match the rated fault current of the cable gland earth tag to that of the cable armour. CMP unique Cast Integral Earth Lug (CIEL) cable gland designs overcome potential overheating and possible flash over problems - CMP BW CIEL, CMP CW CIEL, CMP E1W CIEL, CMP E1FW CIEL, CMP E2W CIEL and CMP E2FW CIEL cable gland ranges.
CMP CIEL 20S to 40mm - 26.0kA for 1 second short circuit fault rating
CMP CIEL 50s to 90mm - 43.0kA for 1 second short circuit fault rating
CMP Cast Integral Earth Lug (CIEL) Aluminium Cable Glands IP66 for SWA Cable Termination at High Voltage - Specification
CMP CW CIEL type aluminium cable gland for use with all types of low voltage and high voltage Single Wire Armour (SWA) cable providing an environmental seal on the cable outer sheath, mechanical retention and electrical continuity via armour wire termination. All CMP cable glands are EMC Tested. CMP CW CIEL range of industrial aluminium cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262 :1999, and is produced from aluminium. The CW CIEL aluminium cable gland provides a high fault current rated cable termination complete with a CMP unique Cast Integral Earth Lug concept - especially suitable for medium and high voltage electrical cables and systems where a high level of protection against short circuit earth fault currents is required.
CMP E1FW-50
CMP Cable Glands For Hazardous Areas
Zone 1, Zone 2, Zone 21 & Zone 22 - ATEX & IECEx
CMP E1FW-50 Cable Glands - Flameproof ATEX Cable Gland - 40.4-53.1mm
CMP Type E1FW Tri-Star Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with Single Wire Armour (SWA) cable.
CMP E1FW Technical Data
Temperature Rating : -60°C to +130°C
Cable Type : Single Wire Armour (SWA) & Aluminium Wire Armour (AWA)
Cable Sealing Area : Cable Inner Bedding & Outer Cable Sheath
CMP E1FW Hazardous Area Approvals
ATEX: SIRA06ATEX1097X, SIRA07ATEX4326X
ATEX Ex II 2/3 GD, Ex d IIC, Ex e II, Ex nR II, Ex tD A21 IP66
IECEx: IECEx SIR 06.0043X
CMP E1FW-40
CMP Cable Glands For Hazardous Areas
Zone 1, Zone 2, Zone 21 & Zone 22 - ATEX & IECEx
CMP E1FW-40 Cable Glands - Flameproof ATEX Cable Gland - 27.9-40.4mm
CMP Type E1FW Tri-Star Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with Single Wire Armour (SWA) cable.
CMP E1FW Technical Data
Temperature Rating : -60°C to +130°C
Cable Type : Single Wire Armour (SWA) & Aluminium Wire Armour (AWA)
Cable Sealing Area : Cable Inner Bedding & Outer Cable Sheath
CMP E1FW Hazardous Area Approvals
ATEX: SIRA06ATEX1097X, SIRA07ATEX4326X
ATEX Ex II 2/3 GD, Ex d IIC, Ex e II, Ex nR II, Ex tD A21 IP66
IECEx: IECEx SIR 06.0043X -
CMP E1FW Hazardous Area Flameproof ATEX Cable Glands for Armoured Cables (SWA) in Zones 1, 2, 21 and 22
CMP E1FW Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) cable glands for use in Zone 1, Zone 2, Zone 21 and Zone 22 hazardous areas with steel wire armoured (SWA) cable.
CMP E1FW cable glands provide a flameproof seal on the cable inner bedding and in addition the gas tight seal has been tested to prove compatibility with Restricted Breathing equipment.
CMP E1FW flameproof cable glands allow mechanical cable retention and earth continuity via the cable armour termination.
CMP E1FW cable glands are suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 & Zone 22.
CMP E1FW-25
CMP Cable Glands For Hazardous Areas
Zone 1, Zone 2, Zone 21 & Zone 22 - ATEX & IECEx
CMP E1FW-25S Cable Glands - Flameproof ATEX Cable Gland - 18.2-26.2mm
CMP Type E1FW Tri-Star Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with Single Wire Armour (SWA) cable.
CMP E1FW Technical Data
Temperature Rating : -60°C to +130°C
Cable Type : Single Wire Armour (SWA) & Aluminium Wire Armour (AWA)
Cable Sealing Area : Cable Inner Bedding & Outer Cable Sheath
CMP E1FW Hazardous Area Approvals
ATEX: SIRA06ATEX1097X, SIRA07ATEX4326X
ATEX Ex II 2/3 GD, Ex d IIC, Ex e II, Ex nR II, Ex tD A21 IP66 IECEx: IECEx SIR 06.0043X
CMP E1FW-63
CMP Cable Glands For Hazardous Areas
Zone 1, Zone 2, Zone 21 & Zone 22 - ATEX & IECEx
CMP E1FW-63 Cable Glands - Flameproof ATEX Cable Gland - 54.6-65mm
CMP Type E1FW Tri-Star Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with Single Wire Armour (SWA) cable.
CMP E1FW Technical Data
Temperature Rating : -60°C to +130°C
Cable Type : Single Wire Armour (SWA) & Aluminium Wire Armour (AWA)
Cable Sealing Area : Cable Inner Bedding & Outer Cable Sheath
CMP E1FW Hazardous Area Approvals
ATEX: SIRA06ATEX1097X, SIRA07ATEX4326X
ATEX Ex II 2/3 GD, Ex d IIC, Ex e II, Ex nR II, Ex tD A21 IP66
IECEx: IECEx SIR 06.0043X
CMP E1FW-50S
CMP Cable Glands For Hazardous Areas
Zone 1, Zone 2, Zone 21 & Zone 22 - ATEX & IECEx
CMP E1FW-50S Cable Glands - Flameproof ATEX Cable Gland - 35.2-46.7mm
CMP Type E1FW Tri-Star Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with Single Wire Armour (SWA) cable.
CMP E1FW Technical Data
Temperature Rating : -60°C to +130°C
Cable Type : Single Wire Armour (SWA) & Aluminium Wire Armour (AWA)
Cable Sealing Area : Cable Inner Bedding & Outer Cable Sheath
CMP E1FW Hazardous Area Approvals
ATEX: SIRA06ATEX1097X, SIRA07ATEX4326X
ATEX Ex II 2/3 GD, Ex d IIC, Ex e II, Ex nR II, Ex tD A21 IP66
IECEx: IECEx SIR 06.0043X
CMP E1FW-63S
CMP Cable Glands For Hazardous Areas
Zone 1, Zone 2, Zone 21 & Zone 22 - ATEX & IECEx
CMP E1FW-63S Cable Glands - Flameproof ATEX Cable Gland - 45.6-59.4mm
CMP Type E1FW Tri-Star Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with Single Wire Armour (SWA) cable.
CMP E1FW Technical Data
Temperature Rating : -60°C to +130°C
Cable Type : Single Wire Armour (SWA) & Aluminium Wire Armour (AWA)
Cable Sealing Area : Cable Inner Bedding & Outer Cable Sheath
CMP E1FW Hazardous Area Approvals
ATEX: SIRA06ATEX1097X, SIRA07ATEX4326X
ATEX Ex II 2/3 GD, Ex d IIC, Ex e II, Ex nR II, Ex tD A21
IP66 IECEx: IECEx SIR 06.0043X
CMP E1FW-20S
CMP Cable Glands For Hazardous Areas
Zone 1, Zone 2, Zone 21 & Zone 22 - ATEX & IECEx
CMP E1FW-20S Cable Glands - Flameproof ATEX Cable Gland - 9.5-15.9mm
CMP Type E1FW Tri-Star Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with Single Wire Armour (SWA) cable.
CMP E1FW Technical Data
Temperature Rating : -60°C to +130°C
Cable Type : Single Wire Armour (SWA) & Aluminium Wire Armour (AWA)
Cable Sealing Area : Cable Inner Bedding & Outer Cable Sheath
CMP E1FW Hazardous Area Approvals
ATEX: SIRA06ATEX1097X, SIRA07ATEX4326X
ATEX Ex II 2/3 GD, Ex d IIC, Ex e II, Ex nR II, Ex tD A21 IP66
IECEx: IECEx SIR 06.0043X
CMP E1FW-20S/16
CMP Cable Glands For Hazardous Areas
Zone 1, Zone 2, Zone 21 & Zone 22 - ATEX & IECEx
CMP E1FW-20S/16 Cable Glands - Flameproof ATEX Cable Gland - 6.1-11.5mm
CMP Type E1FW Tri-Star Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with Single Wire Armour (SWA) cable.
CMP E1FW Technical Data
Temperature Rating : -60°C to +130°C
Cable Type : Single Wire Armour (SWA) & Aluminium Wire Armour (AWA)
Cable Sealing Area : Cable Inner Bedding & Outer Cable Sheath
CMP E1FW Hazardous Area Approvals
ATEX: SIRA06ATEX1097X, SIRA07ATEX4326X
ATEX Ex II 2/3 GD, Ex d IIC, Ex e II, Ex nR II, Ex tD A21 IP66
IECEx: IECEx SIR 06.0043X
CMP E1FW-90
CMP Cable Glands For Hazardous Areas
Zone 1, Zone 2, Zone 21 & Zone 22 - ATEX & IECEx
CMP E1FW-90 Cable Glands - Flameproof ATEX Cable Gland - 76.2-90.4mm
CMP Type E1FW Tri-Star Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with Single Wire Armour (SWA) cable.
CMP E1FW Technical Data
Temperature Rating : -60°C to +130°C
Cable Type : Single Wire Armour (SWA) & Aluminium Wire Armour (AWA)
Cable Sealing Area : Cable Inner Bedding & Outer Cable Sheath
CMP E1FW Hazardous Area Approvals
ATEX: SIRA06ATEX1097X, SIRA07ATEX4326X
ATEX Ex II 2/3 GD, Ex d IIC, Ex e II, Ex nR II, Ex tD A21 IP66
IECEx: IECEx SIR 06.0043X
900 Series Interface F Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface F bushings on switchgear and transformers up to 42kV. Nexans 944TB Tee Connectors provide high voltage cable terminations using separable tee shape connectors :
Nexans 944TB/G - 12kV 2500Amp 70-80sqmm Conductors
Nexans K944TB/G - 24kV 2500Amp 16-800sqmm Conductors
Nexans M944TB/G - 36kV 2500Amp 35-800sqmm Conductors
Nexans P944TB/G - 42kV 1250Amp 50-800sqmm Conductors
400 Series Interface B Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface B bushings on switchgear and transformers.
Nexans Euromold provide high voltage cable accessories to suit the 7 main bushing interfaces : A, B, C (Compact), C (Symmetrical), D, E and F.
Nexans Euromold cable joints, cable terminations, epoxy bushings, angled (elbow) and straight plug-in or bolted separable connectors for connecting, jointing and terminating high voltage cables.
1.2V Analog I/O with full local ESD protection for TSMC 65nm technologySofics
Sofics has verified its TakeCharge ESD protection clamps on technology nodes between 0.25um CMOS down to 5nm across various fabs and foundries. The ESD clamps are silicon and product proven in more than 4500 mass produced IC-products. The cells provide competitive advantage through improved yield, reduced silicon footprint and enable advanced multimedia and wireless interfaces like HDMI, USB 3.0, SATA, WIFI, GPS and Bluetooth.
The Analog I/O clamp described in this document can be used for 1.2V pads in the TSMC 65nm CMOS technology. It has a full local ESD protection and integrated power clamp. The bus resistance is thus not important for IO related ESD stress.
Tsmc65 1v2 full local protection analog io + cdmSofics
Sofics has verified its TakeCharge ESD protection clamps on technology nodes between 0.25um CMOS down to 5nm across various fabs and foundries. The ESD clamps are silicon and product proven in more than 4500 mass produced IC-products. The cells provide competitive advantage through improved yield, reduced silicon footprint and enable advanced multimedia and wireless interfaces like HDMI, USB 3.0, SATA, WIFI, GPS and Bluetooth.
The Analog I/O clamp described in this document can be used for 1.2V pads in the TSMC 65nm CMOS technology. It has a full local ESD protection and integrated power clamp. The bus resistance is thus not important for IO related ESD stress.
The cell also includes a CDM secondary protection.
1.2V core power clamp for TSMC 65nm technologySofics
Sofics has verified its TakeCharge ESD protection clamps on technology nodes between 0.25um CMOS down to 5nm across various fabs and foundries. The ESD clamps are silicon and product proven in more than 4500 mass produced IC-products. The cells provide competitive advantage through improved yield, reduced silicon footprint and enable advanced multimedia and wireless interfaces like HDMI, USB 3.0, SATA, WIFI, GPS and Bluetooth.
The ESD clamp described in this document protects 1.2V core domains in TSMC 65nm CMOS technology.
CMP Triton CDS Type T3CDS Cable Glands are Triple Certified Flameproof (Type 'd'), Increased Safety (Type 'e') and Restricted Breathing (Type ‘nR’) indoor and outdoor cable glands for use in Zone 1, Zone 2, Zone 21 and Zone 22 hazardous areas.
CMP Triton cable glands are compatible with all types of armoured cable providing a flameproof seal on the cable inner bedding and an environmental seal on the cable outer sheath with IP68 rating.
The CMP Triton CDS cable gland is suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2 , Zone 21 & Zone 22.
CMP Triton T3CDS Flameproof & Deluge Proof Cable Glands - Specification
CMP Triton cable glands utilise a unique Compensating Displacement Seal (CDS) system which provides full compatibility with Restricted Breathing equipment that rely upon flammable gases being excluded from the enclosure.
The CMP Triton cable gland provides mechanical cable retention and electrical continuity via armour wire termination. A reversible armour cone and CMP AnyWay universal clamping ring arrangement allows the cable to be easily disconnected from the equipment for maintenance and change out etc., and re-connected with ease. This feature also facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access. Separate tightening actions for the inner compensating displacement seal (CDS) system and the armour termination affords maximum control over the pressure applied to the cable inner bedding. The CMP Triton CDS Cable Gland is suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2 , Zone 21 & Zone 22 provided always that the prevailing code of practice for selection, installation and maintenance is observed, e.g. IEC 60079-14.
High Voltage Cable Terminations (SWA) with CMP Zen Insulated Cable Glands & Cast Integral Earth Lug
CMP Zen Glands - Protect Against Short Circuit Earth Fault Currents
CMP CIEL Cast Integral Earth Lug - Aluminium HV Cable Glands
High voltage single core power cables (3.3kV, 6.6kV, 11kV, 33kV) can generate high fault current ratings via aluminium wire armours (AWA) where the actual fault current may exceed that of the standard CMP earth tag - it is vital for low and high voltage electrical safety to match the rated fault current of the cable gland earth tag to that of the cable armour. CMP unique Cast Integral Earth Lug (CIEL) cable gland designs overcome potential overheating and possible flash over problems - CMP BW CIEL, CMP CW CIEL, CMP E1W CIEL, CMP E1FW CIEL, CMP E2W CIEL and CMP E2FW CIEL cable gland ranges.
CMP CIEL 20S to 40mm - 26.0kA for 1 second short circuit fault rating
CMP CIEL 50s to 90mm - 43.0kA for 1 second short circuit fault rating
CMP Cast Integral Earth Lug (CIEL) Aluminium Cable Glands IP66 for SWA Cable Termination at High Voltage - Specification
CMP CW CIEL type aluminium cable gland for use with all types of low voltage and high voltage Single Wire Armour (SWA) cable providing an environmental seal on the cable outer sheath, mechanical retention and electrical continuity via armour wire termination. All CMP cable glands are EMC Tested. CMP CW CIEL range of industrial aluminium cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262 :1999, and is produced from aluminium. The CW CIEL aluminium cable gland provides a high fault current rated cable termination complete with a CMP unique Cast Integral Earth Lug concept - especially suitable for medium and high voltage electrical cables and systems where a high level of protection against short circuit earth fault currents is required.
CMP E1FW-50
CMP Cable Glands For Hazardous Areas
Zone 1, Zone 2, Zone 21 & Zone 22 - ATEX & IECEx
CMP E1FW-50 Cable Glands - Flameproof ATEX Cable Gland - 40.4-53.1mm
CMP Type E1FW Tri-Star Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with Single Wire Armour (SWA) cable.
CMP E1FW Technical Data
Temperature Rating : -60°C to +130°C
Cable Type : Single Wire Armour (SWA) & Aluminium Wire Armour (AWA)
Cable Sealing Area : Cable Inner Bedding & Outer Cable Sheath
CMP E1FW Hazardous Area Approvals
ATEX: SIRA06ATEX1097X, SIRA07ATEX4326X
ATEX Ex II 2/3 GD, Ex d IIC, Ex e II, Ex nR II, Ex tD A21 IP66
IECEx: IECEx SIR 06.0043X
CMP E1FW-40
CMP Cable Glands For Hazardous Areas
Zone 1, Zone 2, Zone 21 & Zone 22 - ATEX & IECEx
CMP E1FW-40 Cable Glands - Flameproof ATEX Cable Gland - 27.9-40.4mm
CMP Type E1FW Tri-Star Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with Single Wire Armour (SWA) cable.
CMP E1FW Technical Data
Temperature Rating : -60°C to +130°C
Cable Type : Single Wire Armour (SWA) & Aluminium Wire Armour (AWA)
Cable Sealing Area : Cable Inner Bedding & Outer Cable Sheath
CMP E1FW Hazardous Area Approvals
ATEX: SIRA06ATEX1097X, SIRA07ATEX4326X
ATEX Ex II 2/3 GD, Ex d IIC, Ex e II, Ex nR II, Ex tD A21 IP66
IECEx: IECEx SIR 06.0043X -
CMP E1FW Hazardous Area Flameproof ATEX Cable Glands for Armoured Cables (SWA) in Zones 1, 2, 21 and 22
CMP E1FW Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) cable glands for use in Zone 1, Zone 2, Zone 21 and Zone 22 hazardous areas with steel wire armoured (SWA) cable.
CMP E1FW cable glands provide a flameproof seal on the cable inner bedding and in addition the gas tight seal has been tested to prove compatibility with Restricted Breathing equipment.
CMP E1FW flameproof cable glands allow mechanical cable retention and earth continuity via the cable armour termination.
CMP E1FW cable glands are suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 & Zone 22.
CMP E1FW-25
CMP Cable Glands For Hazardous Areas
Zone 1, Zone 2, Zone 21 & Zone 22 - ATEX & IECEx
CMP E1FW-25S Cable Glands - Flameproof ATEX Cable Gland - 18.2-26.2mm
CMP Type E1FW Tri-Star Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with Single Wire Armour (SWA) cable.
CMP E1FW Technical Data
Temperature Rating : -60°C to +130°C
Cable Type : Single Wire Armour (SWA) & Aluminium Wire Armour (AWA)
Cable Sealing Area : Cable Inner Bedding & Outer Cable Sheath
CMP E1FW Hazardous Area Approvals
ATEX: SIRA06ATEX1097X, SIRA07ATEX4326X
ATEX Ex II 2/3 GD, Ex d IIC, Ex e II, Ex nR II, Ex tD A21 IP66 IECEx: IECEx SIR 06.0043X
CMP E1FW-63
CMP Cable Glands For Hazardous Areas
Zone 1, Zone 2, Zone 21 & Zone 22 - ATEX & IECEx
CMP E1FW-63 Cable Glands - Flameproof ATEX Cable Gland - 54.6-65mm
CMP Type E1FW Tri-Star Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with Single Wire Armour (SWA) cable.
CMP E1FW Technical Data
Temperature Rating : -60°C to +130°C
Cable Type : Single Wire Armour (SWA) & Aluminium Wire Armour (AWA)
Cable Sealing Area : Cable Inner Bedding & Outer Cable Sheath
CMP E1FW Hazardous Area Approvals
ATEX: SIRA06ATEX1097X, SIRA07ATEX4326X
ATEX Ex II 2/3 GD, Ex d IIC, Ex e II, Ex nR II, Ex tD A21 IP66
IECEx: IECEx SIR 06.0043X
CMP E1FW-50S
CMP Cable Glands For Hazardous Areas
Zone 1, Zone 2, Zone 21 & Zone 22 - ATEX & IECEx
CMP E1FW-50S Cable Glands - Flameproof ATEX Cable Gland - 35.2-46.7mm
CMP Type E1FW Tri-Star Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with Single Wire Armour (SWA) cable.
CMP E1FW Technical Data
Temperature Rating : -60°C to +130°C
Cable Type : Single Wire Armour (SWA) & Aluminium Wire Armour (AWA)
Cable Sealing Area : Cable Inner Bedding & Outer Cable Sheath
CMP E1FW Hazardous Area Approvals
ATEX: SIRA06ATEX1097X, SIRA07ATEX4326X
ATEX Ex II 2/3 GD, Ex d IIC, Ex e II, Ex nR II, Ex tD A21 IP66
IECEx: IECEx SIR 06.0043X
CMP E1FW-63S
CMP Cable Glands For Hazardous Areas
Zone 1, Zone 2, Zone 21 & Zone 22 - ATEX & IECEx
CMP E1FW-63S Cable Glands - Flameproof ATEX Cable Gland - 45.6-59.4mm
CMP Type E1FW Tri-Star Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with Single Wire Armour (SWA) cable.
CMP E1FW Technical Data
Temperature Rating : -60°C to +130°C
Cable Type : Single Wire Armour (SWA) & Aluminium Wire Armour (AWA)
Cable Sealing Area : Cable Inner Bedding & Outer Cable Sheath
CMP E1FW Hazardous Area Approvals
ATEX: SIRA06ATEX1097X, SIRA07ATEX4326X
ATEX Ex II 2/3 GD, Ex d IIC, Ex e II, Ex nR II, Ex tD A21
IP66 IECEx: IECEx SIR 06.0043X
CMP E1FW-20S
CMP Cable Glands For Hazardous Areas
Zone 1, Zone 2, Zone 21 & Zone 22 - ATEX & IECEx
CMP E1FW-20S Cable Glands - Flameproof ATEX Cable Gland - 9.5-15.9mm
CMP Type E1FW Tri-Star Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with Single Wire Armour (SWA) cable.
CMP E1FW Technical Data
Temperature Rating : -60°C to +130°C
Cable Type : Single Wire Armour (SWA) & Aluminium Wire Armour (AWA)
Cable Sealing Area : Cable Inner Bedding & Outer Cable Sheath
CMP E1FW Hazardous Area Approvals
ATEX: SIRA06ATEX1097X, SIRA07ATEX4326X
ATEX Ex II 2/3 GD, Ex d IIC, Ex e II, Ex nR II, Ex tD A21 IP66
IECEx: IECEx SIR 06.0043X
CMP E1FW-20S/16
CMP Cable Glands For Hazardous Areas
Zone 1, Zone 2, Zone 21 & Zone 22 - ATEX & IECEx
CMP E1FW-20S/16 Cable Glands - Flameproof ATEX Cable Gland - 6.1-11.5mm
CMP Type E1FW Tri-Star Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with Single Wire Armour (SWA) cable.
CMP E1FW Technical Data
Temperature Rating : -60°C to +130°C
Cable Type : Single Wire Armour (SWA) & Aluminium Wire Armour (AWA)
Cable Sealing Area : Cable Inner Bedding & Outer Cable Sheath
CMP E1FW Hazardous Area Approvals
ATEX: SIRA06ATEX1097X, SIRA07ATEX4326X
ATEX Ex II 2/3 GD, Ex d IIC, Ex e II, Ex nR II, Ex tD A21 IP66
IECEx: IECEx SIR 06.0043X
CMP E1FW-90
CMP Cable Glands For Hazardous Areas
Zone 1, Zone 2, Zone 21 & Zone 22 - ATEX & IECEx
CMP E1FW-90 Cable Glands - Flameproof ATEX Cable Gland - 76.2-90.4mm
CMP Type E1FW Tri-Star Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with Single Wire Armour (SWA) cable.
CMP E1FW Technical Data
Temperature Rating : -60°C to +130°C
Cable Type : Single Wire Armour (SWA) & Aluminium Wire Armour (AWA)
Cable Sealing Area : Cable Inner Bedding & Outer Cable Sheath
CMP E1FW Hazardous Area Approvals
ATEX: SIRA06ATEX1097X, SIRA07ATEX4326X
ATEX Ex II 2/3 GD, Ex d IIC, Ex e II, Ex nR II, Ex tD A21 IP66
IECEx: IECEx SIR 06.0043X
CMP E1FW-32
CMP Cable Glands For Hazardous Areas
Zone 1, Zone 2, Zone 21 & Zone 22 - ATEX & IECEx
CMP E1FW-32 Cable Glands - Flameproof ATEX Cable Gland - 23.7-33.9mm
CMP Type E1FW Tri-Star Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with Single Wire Armour (SWA) cable.
CMP E1FW Technical Data
Temperature Rating : -60°C to +130°C
Cable Type : Single Wire Armour (SWA) & Aluminium Wire Armour (AWA)
Cable Sealing Area : Cable Inner Bedding & Outer Cable Sheath
CMP E1FW Hazardous Area Approvals
ATEX: SIRA06ATEX1097X, SIRA07ATEX4326X
ATEX Ex II 2/3 GD, Ex d IIC, Ex e II, Ex nR II, Ex tD A21 IP66
IECEx: IECEx SIR 06.0043X
CMP E1FW-75
CMP Cable Glands For Hazardous Areas
Zone 1, Zone 2, Zone 21 & Zone 22 - ATEX & IECEx
CMP E1FW-75 Cable Glands - Flameproof ATEX Cable Gland - 66.7-78.5mm
CMP Type E1FW Tri-Star Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with Single Wire Armour (SWA) cable.
CMP E1FW Technical Data
Temperature Rating : -60°C to +130°C
Cable Type : Single Wire Armour (SWA) & Aluminium Wire Armour (AWA)
Cable Sealing Area : Cable Inner Bedding & Outer Cable Sheath
CMP E1FW Hazardous Area Approvals
ATEX: SIRA06ATEX1097X, SIRA07ATEX4326X
ATEX Ex II 2/3 GD, Ex d IIC, Ex e II, Ex nR II, Ex tD A21 IP66
IECEx: IECEx SIR 06.0043X
CMP E1FW-75S
CMP Cable Glands For Hazardous Areas
Zone 1, Zone 2, Zone 21 & Zone 22 - ATEX & IECEx
CMP E1FW-75S Cable Glands - Flameproof ATEX Cable Gland - 59-72.1mm
CMP Type E1FW Tri-Star Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with Single Wire Armour (SWA) cable.
CMP E1FW Technical Data
Temperature Rating : -60°C to +130°C
Cable Type : Single Wire Armour (SWA) & Aluminium Wire Armour (AWA)
Cable Sealing Area : Cable Inner Bedding & Outer Cable Sheath
CMP E1FW Hazardous Area Approvals
ATEX: SIRA06ATEX1097X, SIRA07ATEX4326X
ATEX Ex II 2/3 GD, Ex d IIC, Ex e II, Ex nR II, Ex tD A21 IP66
IECEx: IECEx SIR 06.0043X
CMP E1FW-20
CMP Cable Glands For Hazardous Areas
Zone 1, Zone 2, Zone 21 & Zone 22 - ATEX & IECEx
CMP E1FW-20 Cable Glands - Flameproof ATEX Cable Gland - 12.5-20.9mm
CMP Type E1FW Tri-Star Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with Single Wire Armour (SWA) cable.
CMP E1FW Technical Data
Temperature Rating : -60°C to +130°C
Cable Type : Single Wire Armour (SWA) & Aluminium Wire Armour (AWA)
Cable Sealing Area : Cable Inner Bedding & Outer Cable Sheath
CMP E1FW Hazardous Area Approvals
ATEX: SIRA06ATEX1097X, SIRA07ATEX4326X
ATEX Ex II 2/3 GD, Ex d IIC, Ex e II, Ex nR II, Ex tD A21 IP66
IECEx: IECEx SIR 06.0043X
CMP E1FW-25S
CMP Cable Glands For Hazardous Areas
Zone 1, Zone 2, Zone 21 & Zone 22 - ATEX & IECEx
CMP E1FW-25S Cable Glands - Flameproof ATEX Cable Gland - 14-22mm
CMP Type E1FW Tri-Star Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with Single Wire Armour (SWA) cable.
CMP E1FW Technical Data
Temperature Rating : -60°C to +130°C
Cable Type : Single Wire Armour (SWA) & Aluminium Wire Armour (AWA)
Cable Sealing Area : Cable Inner Bedding & Outer Cable Sheath
CMP E1FW Hazardous Area Approvals
ATEX: SIRA06ATEX1097X, SIRA07ATEX4326X
ATEX Ex II 2/3 GD, Ex d IIC, Ex e II, Ex nR II, Ex tD A21 IP66
IECEx: IECEx SIR 06.0043X
Similar to CMP PX2K-20S Barrier Glands Exd Flameproof (ATEX) Cable Glands (20)
Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment
This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment.
You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically.
THE RULES OF SAFE ISOLATION ARE:
Obtain permission to start work (a Permit may be required in some situations)
Identify the source(s) of supply using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Isolate the supply(s)
Secure the isolation
Prove the system/equipment is DEAD using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Put up warning signs to tell other people that the electrical installation has been isolated
Once the system/equipment is proved DEAD, work can begin
Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.
THORNE & DERRICK based in the UK are international distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment.
Since 1985, T&D have established an international reputation based on SERVICE | INTEGRITY | TRUST.
Contact us for 3M, ABB, Alroc, AN Wallis, CATU, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform , Furse, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024Tobias Schneck
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
Software Delivery At the Speed of AI: Inflectra Invests In AI-Powered QualityInflectra
In this insightful webinar, Inflectra explores how artificial intelligence (AI) is transforming software development and testing. Discover how AI-powered tools are revolutionizing every stage of the software development lifecycle (SDLC), from design and prototyping to testing, deployment, and monitoring.
Learn about:
• The Future of Testing: How AI is shifting testing towards verification, analysis, and higher-level skills, while reducing repetitive tasks.
• Test Automation: How AI-powered test case generation, optimization, and self-healing tests are making testing more efficient and effective.
• Visual Testing: Explore the emerging capabilities of AI in visual testing and how it's set to revolutionize UI verification.
• Inflectra's AI Solutions: See demonstrations of Inflectra's cutting-edge AI tools like the ChatGPT plugin and Azure Open AI platform, designed to streamline your testing process.
Whether you're a developer, tester, or QA professional, this webinar will give you valuable insights into how AI is shaping the future of software delivery.
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
PHP Frameworks: I want to break free (IPC Berlin 2024)Ralf Eggert
In this presentation, we examine the challenges and limitations of relying too heavily on PHP frameworks in web development. We discuss the history of PHP and its frameworks to understand how this dependence has evolved. The focus will be on providing concrete tips and strategies to reduce reliance on these frameworks, based on real-world examples and practical considerations. The goal is to equip developers with the skills and knowledge to create more flexible and future-proof web applications. We'll explore the importance of maintaining autonomy in a rapidly changing tech landscape and how to make informed decisions in PHP development.
This talk is aimed at encouraging a more independent approach to using PHP frameworks, moving towards a more flexible and future-proof approach to PHP development.
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
Search and Society: Reimagining Information Access for Radical FuturesBhaskar Mitra
The field of Information retrieval (IR) is currently undergoing a transformative shift, at least partly due to the emerging applications of generative AI to information access. In this talk, we will deliberate on the sociotechnical implications of generative AI for information access. We will argue that there is both a critical necessity and an exciting opportunity for the IR community to re-center our research agendas on societal needs while dismantling the artificial separation between the work on fairness, accountability, transparency, and ethics in IR and the rest of IR research. Instead of adopting a reactionary strategy of trying to mitigate potential social harms from emerging technologies, the community should aim to proactively set the research agenda for the kinds of systems we should build inspired by diverse explicitly stated sociotechnical imaginaries. The sociotechnical imaginaries that underpin the design and development of information access technologies needs to be explicitly articulated, and we need to develop theories of change in context of these diverse perspectives. Our guiding future imaginaries must be informed by other academic fields, such as democratic theory and critical theory, and should be co-developed with social science scholars, legal scholars, civil rights and social justice activists, and artists, among others.
Transcript: Selling digital books in 2024: Insights from industry leaders - T...BookNet Canada
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
Let's dive deeper into the world of ODC! Ricardo Alves (OutSystems) will join us to tell all about the new Data Fabric. After that, Sezen de Bruijn (OutSystems) will get into the details on how to best design a sturdy architecture within ODC.
1. CABLE GLAND AND CABLE CONNECTION SPECIALISTS
CMP
CMP HAZARDOUS AREA PRODUCTS
The CMP PX2K cable gland is suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2,
Zone 21 & Zone 22 provided always that the prevailing code of practice for selection and installation is observed, e.g.
IEC 60079-14.
The PX2K is supplied in kit form inclusive of two detachable armour cones. Stepped Cone is suitable for SWA cables,
Grooved Cone is suitable for all other approved armoured cables.
C
TECHNICAL DATA
A
PX2K
BS 6121:Part 1:1989, EN 50262:1999
SIRA06ATEX1097X
Code of Protection Category
II 2 GD Ex d IIC, Ex e II, Ex nR II, Ex tD A21 IP66 - Equipment
ATEX
Zone 1, Zone 2, Zone 21, & Zone 22 - Gas Groups IIA, IIB, IIC
Cable Type
Armour Clamping
Sealing Technique
Sealing Area(s)
Optional Accessories
Cable Gland Selection Table
Available Entry Threads ‘C’
Cable
Gland
Size
Standard
Option
Metric
20S/16
20S
20
25S
25
32
40
50S
50
63S
63
75S
75
90
NPT
NPT
M20
M20
M20
M25
M25
M32
M40
M50
M50
M63
M63
M75
M75
M90
1/2”
1/2”
1/2”
3/4”
3/4”
1”
1-1/4”
1-1/2”
2”
2”
2-1/2”
2-1/2”
3”
3”
3/4”
3/4”
3/4”
1”
1”
1-1/4”
1-1/2”
2”
2-1/2”
2-1/2”
3”
3”
3-1/2”
3-1/2”
F
B
D
05
U
GOST R Certificate Number
Code of Protection Category
Compliance Standards
GGTN Permit Number
GOST K Certificate Number
RoK Permit for Use Number
Lloyds Approval Number
DNV Approval Number
ABS Approval Number
Continuous Operating Temperature
Ingress Protection Rating
Ingress Protection Document
Deluge Protection Compliance
Deluge Protection Document
Cable Gland Material
Seal Material
U
Compliance Standards
E
LL
IECEx Approval Number
Code of Protection Category
EN 60079-0:2004, EN 60079-1:2004, EN 60079-7:2003, EN 60079-15:2003,
EN 61241-0:2004, EN 61241-1:2004
IECEx SIR 06.0044X
Ex d IIC, Ex e II, Ex nR II, Ex tD A21 IP66
IEC 60079-0:2004, IEC 60079-1:2003, IEC 60079-7:2001,
IEC 60079-15:2005, IEC 61241-0:2004, IEC 61241-1:2004
POCC GB.
05.B01912
Ex d IIC U, Ex e II U
OCT P 52350.0-2005, OCT P 52350.1-2005, OCT P 52350.7-2005
PPC 00-18262
KZ7500052.05.01.00063
08-067693
01/00172
E-6157
01-LD 234401-PDA
-60°C to +100°C
IP66, IP67, IP68
5046 C549G
DTS01 : 91
5046 C549G-D
Brass, Electroless Nickelplated Brass, Stainless Steel, Aluminium
CMP SOLO LSF Thermoplastic Elastomer / Epoxy Resin Barrier Compound
Wire Braid Armour, Single Wire Armour (SWA), Screened Flexible Wire Braid
(e.g. CY / SY), Steel Tape Armour (STA) Pliable Wire Armour (PWA)
Detachable Compound Tube / Cone & AnyWay Universal Clamping Ring
Unique CMP "LRS" ™ Outer Seal (Load Retention Seal)
Inner Compound Barrier & Cable Outer Sheath
Locknut, Shroud, Entry Thread Seal, Serrated Washer, Earth Tag,
Adaptor/Reducer
L
Compliance Standards
L
TEL 0044 191 490 1547 FAX 0044 477 5371
TEL 0044 117 977 4647 FAX 0044 977 5582
WWW.THORNEANDDERRICK.CO.UK
Type
Design Specification
ATEX Cetification
L
THORNE & DERRICK UK
CMP Type PX2K Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’)
cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with all types of armoured cable
providing a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath.
The cable gland provides mechanical cable retention and electrical continuity via armour termination. A combined
detachable armour cone and compound tube, together with AnyWay universal clamping ring arrangement allows the
cable to be easily disconnected from the equipment, for maintenance and change out etc., and re-connected with the
same consummate ease. This feature also facilitates remote make off procedures when the termination is to be
conducted in confined spaces or in areas of restricted access.
LL
WWW.CABLEJOINTS.CO.UK
PX2K Flameproof Ex d, Increased Safety Ex e, Restricted
Breathing Ex nR Compound Barrier Cable Gland
PX2K CABLE GLAND
Note: Dedicated version for Steel Wire Armour type is PX2KW.
Dedicated version for all other Armour types is PX2KX
Note: This standard design concept is also available with
bi-code approvals, suitable for installation in systems
complying with NEC wiring code rules.
Armour Range †
Diameter Number Overall
Ordering
Cable
Across Across Nominal
Over
Cable
PVC
Minimum
of
Gland
Flats Corners Protrusion Reference
Conductors
Diameter Grooved Stepped
Thread
Shroud
Cores
‘D’
Cone
Cone
Weight
Length (Brass Metric)
‘A’
‘B’
‘D’
Length ‘E’
Reference*
(Kgs)
‘F’
#
Max
Max Min Max Min Max Min Max Max
Max
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
12.6
12.6
12.6
17.5
17.5
23.6
30.0
36.6
41.0
47.9
53.7
59.8
64.3
75.3
15
15
15
29
29
51
80
122
149
205
259
320
364
500
6.1
9.5
12.5
14.0
18.2
23.7
27.9
35.2
40.4
45.6
54.6
59.0
66.7
76.2
11.5
15.9
20.9
22.0
26.2
33.9
40.4
46.7
53.1
59.4
65.9
72.1
78.5
90.4
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
1.0 0.9 1.25 24.0
1.0 0.9 1.25 24.0
1.0 0.9 1.25 30.5
1.0 1.25 1.6 37.5
1.0 1.25 1.6 37.5
1.0 1.6 2.0 46.0
1.0 1.6 2.0 55.0
1.0 2.0 2.5 60.0
1.0 2.0 2.5 70.0
1.0 2.0 2.5 75.0
1.0 2.0 2.5 80.0
1.0 2.0 2.5 89.0
1.0 2.0 2.5 99.0
1.6 3.15 3.15 114.0
26.6
26.6
33.3
40.5
40.5
51.0
61.0
66.5
78.6
83.2
89.0
101.6
111.1
128.6
58.5
58.5
60.5
67.5
67.5
69.5
78.0
75.5
80.5
91.5
92.0
99.0
102.0
120.0
20S16PX2K1RA
20SPX2K1RA
20PX2K1RA
25SPX2K1RA
25PX2K1RA
32PX2K1RA
40PX2K1RA
50SPX2K1RA
50PX2K1RA
63SPX2K1RA
63PX2K1RA
75SPX2K1RA
75PX2K1RA
90PX2K1RA
PVC04
PVC04
PVC06
PVC09
PVC09
PVC11
PVC15
PVC18
PVC21
PVC23
PVC25
PVC28
PVC30
PVC32
0.200
0.200
0.230
0.330
0.330
0.510
0.720
0.825
0.860
1.450
1.600
2.300
3.050
5.000
All dimensions in millimetres
Note: *LSF Shrouds also available on request. †Alternative armour clamping range available for non-standard armour sizes. Marine approvals including Lloyds, DNV & ABS are also available from CMP Products.
# Other thread forms are available
131
www.cmp-products.com