A desalter is a key component in the distillation process that removes salts and impurities from crude oil. It mixes the oil with a wash water solution, separates water-soluble impurities, and uses an electrostatic field to separate water and impurities from the oil. It improves distillation efficiency and prevents corrosion and fouling.
a very informative presentation about wet crude treatment in every step
for more information, see this article:
https://www.arab-oil-naturalgas.com/wet-crude-oil-treatment-plant/
a very informative presentation about wet crude treatment in every step
for more information, see this article:
https://www.arab-oil-naturalgas.com/wet-crude-oil-treatment-plant/
Raw water coming from different sources contains dissolved salts and un-dissolved or suspended impurities. It is necessary to remove harmful salts dissolved into the water before feeding it to the boiler.
A brief explanation of parameters affecting asphaltene and Wax (Paraffins) Deposition, The document also covers techniques available to alleviate the problem
Raw water coming from different sources contains dissolved salts and un-dissolved or suspended impurities. It is necessary to remove harmful salts dissolved into the water before feeding it to the boiler.
A brief explanation of parameters affecting asphaltene and Wax (Paraffins) Deposition, The document also covers techniques available to alleviate the problem
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Courier management system project report.pdfKamal Acharya
It is now-a-days very important for the people to send or receive articles like imported furniture, electronic items, gifts, business goods and the like. People depend vastly on different transport systems which mostly use the manual way of receiving and delivering the articles. There is no way to track the articles till they are received and there is no way to let the customer know what happened in transit, once he booked some articles. In such a situation, we need a system which completely computerizes the cargo activities including time to time tracking of the articles sent. This need is fulfilled by Courier Management System software which is online software for the cargo management people that enables them to receive the goods from a source and send them to a required destination and track their status from time to time.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
3. Desalter
The equipment used for the removal of
salts, suspended solids and water
soluble trace metals/slits, iron oxides,
sand, sulfur etc.
4. Purpose
To reduce salt fouling and plugging of crude oil
fractionators and exchangers.
To reduce rate of corrosion of crude oil
fractionators.
To avoid lengthy and expensive plant shut downs.
To reduce consumption of Neutralizers.
5. Purpose Cont’d
To remove Metals which may poison
Reformer Catalyst.
To achieve more then average Plant Life.
To obtain high degree of operating flexibility
due to slug or high tank bottom
abnormalities.
6. Crude Salt’s Chemistry
These salts are mainly chlorides and
sulfates of Calcium and Magnesium like
NaCl, MgCl2, CaCl2 and CaCl2.
Chlorides hydrolyzed to hydrochloric acid
cause severe corrosion.
CaCl2 + H2O → Ca(OH)2 +HCl
Salts act as catalyst to Plugging of
Exchangers and formation of coke (hot
spots) in heater tubes.
Salts in residue contain high ash content
causing degradation of product.
7. Crude Salt’s Chemistry Cont’d
Slats are generally measured in PTB
(parts per thousands barrels).
Salts concentration in crude depends
upon the Source of Crude.
Salts are inorganic in nature and are
soluble in water (inorganic) and
insoluble in crude (organic).
8. Types of Desalter
Natural Desalter
Chemical Desalter
Electro Chemical Desalter
9. Natural Desalter
Desalter in which Settling time is
given to salts, sediments, water and
sludge which under gravity settled
down in the bottom of Vessel and then
drained.
Example is drainage of sludge and
water from tanks and Settling Vessel
F-2 at Lummus.
10. Chemical Deslater
Desalter in which chemical is added to the
crude in order to remove salts, sediments,
water and sludge.
Chemicals reduce the surface tension of
making removal of salts and water easy.
Both Natural and Chemical Desalter are
useful for crude having low salts or for
Batch Process.
11. Electrochemical Desalter
Desalting process by use of chemical
along with electric field.
Demulsifier used as chemical while
electrodes connected to step up
transformer used for electric field
generation.
12. Type of Desalter in ARL
Settler/Natural Desalter at lummus.
Electrostatic/electrical Desalter use at
HBU’s
Electrochemical Desalter use at HCU
13. Process Flow
Preheated crude, fresh water along
with small amount of chemical
injected to Desalter through mixing
valve to form Emulsion.
Small water droplets containing salts
converted to form big and heavy drops
through Electric Field (Emulsion
Breaking) and settle in the bottom.
16. Basic Component of Desalter
Transformer
Crude Inlet /Outlet Collection Header
Float Arrangement
Mud Wash Line
Effluent Header
Tri cocks
Electrodes
17. Transformer
Provide electric filed.
A.C Current provided to Transformer.
Helps in emulsion breaking.
Setup transfer
Inlet Crude Header
Cylindrical in shape having caps on
both ends with out holes in it.
Holes are random and flow is laminar.
18. Float Arrangement
To keep the required water level in the
Vessel.
LCV on the effluent drain is connected to
float arrangement.
Outlet Collection Header
Rectangular in shape having circular holes
in it.
19. Mud Wash Line
The line is equipped with nozzles
which enhance the velocity head of
water when operated.
Operated in order to remove sludge.
Effluent Header
Having circular holes to drain effluent
continually.
Containing LCV to maintain required
water level.
20. Tri cocks
Sample points used to check water
level, interface and Crude condition.
Electrodes
Electrodes are connected to
Transformer.
Electrodes are in form of bed hanging
in the vessel.
Bed vibrates when field created
through them.
21. Pressure Safety Valve
Mechanical Safety of Vessel because
the Desalter operate at high Pressure.
Mixing Valve
Used to form emulsion of water salts
and crude at the inlet of Desalter.
Cuff Header
Exist above the effluent header.
To drain emulsion with out
disturbing water level.
22. Process Variables
Components of wash water are Fresh water
and <50% of recirculation water (Desalter
effluent).
Injected to increase the contact b/w water
and Salts because salts are soluble in
water.
Wash water should not contain any oxygen,
under spec carbonates, bicarbonates and
sulfates.
pH should be maintained b/w 6 to 8.
Wash Water/Dilution Water
23. Quality of Wash Water
pH 5.5 – 7.5
Total Hardness <50ppm
Total CO3
-1/ HCO3-2 <50ppm
Ammonia <100ppm
Chlorides <2000ppm
Sulfates <200ppm
Oxygen <1ppm
24. Water Injection Points
Before charge pump
Results maximum contact
Reduce scale formation of calcium and magnesium
in the pre heat train.
Draw Backs
Pumps capacity reduces.
Strong emulsion form due to intense shearing
agitation of impeller in pump body.
pH of water should be highly controlled.
26. Down Stream of Charge Pump
Before FCV.
No Intense shearing due to impeller.
Braw Backs
Emulsion formation
Scales formation in the Pre heat train
Upstream of Mixing Valve
Controlled mixing and emulsion
formation.
No Scaling in the pre heat train.
27. Settling Time
Water settling follows Stroke’s Law
V = 2r2g(d-do)/9η
Settling Time
T α (1/ size of droplet)
Droplet size should be >50 micron.
Droplet Size increased through mixing
valve.
Min. settling time is 20 to 30 minutes.
28. Temperature
Decrease in temperature increase the
viscosity making settling of salts and water
difficult and vice versa.
T α (1/ Viscosity)
High Desalter Temperature cause increase in
solubility of water, formation of tight
emulsion and carry over of Salts and Water.
Temperate limit is from 90oC to 150oC
varying from crude to crude.
29. Demulsifying Agents
These are Chemicals
used for breakage of
emulsion.
Types of Emulsion
Water/Oil Emulsion
(Refinery)
Micro size droplets of
water are surrounded
by oil.
Oil/Water Emulsion
Micro size droplets of
Oil is surrounded by
Water.
Wate
r
Crude Oil
Crude
Oil
Water
30. Demulsifying Agents Cont’d
Demulsifier weaken the oil layer
around water to coalesce with other
droplets.
In some cases changes the polarity
and so the droplets attract each other
to coalesced.
Excess demulsifying agent effects
adversely.
33. Types of Desalting chemicals
Soap : migrates to interface and weaken
interfacial films.
Polar : Migrates to interface and alter
polarity, so particles will coalesce.
H2O Soluble : Acts as Soap or Polar but
remain in water phase
Ionic : Increase Electric conductivity, which
increase tendency to demulsify.
34. Electric Field
High voltage Electric
field is provided to
break Emulsion.
Alternating electric
field is provided.
Step up Transformer is
used to provide high
voltage of 10 to 18KV
depending upon the
salts in crude.
35. Electric Field cont’d
Electric field break the
emulsion layer formed
across water and so
water coalesce to form
large droplets which
settled under gravity.
Vibration of water
droplets occur due to
A.C
High voltage electric
field will be provided
when salts in crude are
low and vice versa.
36. ∆P across Mixing Valve
Used for max mixing of wash water,
Demulsifier and crude.
Pressure difference across mixing valve is
important varying from few to60 psi
depending upon:
Nature of Crude
∆P should be increase with increase in salts
in crude and vice versa.
Operating Temperature
At high operating Temperature ∆P should
be reduced and vice versa.
37. Flow Velocity:
∆P should be reduced when flow velocity is high
and vice versa.
Emulsifying agents presence in crude:
∆P should be reduced and vice versa.
Rules of Thumb:
If Emulsion is reported from tri-cock, decrease in
∆P will help to normalize the process
Reduce ∆P when salts are carry over with crude.
Increase/Decrease ∆P by <5psiwhile maintaining
the cuff 6-12 inches thick. If cuff increased more
then 12 inches the ∆P must be lowered. If Cuff
decreased less then 6 inches, ∆P must be
increased.
∆P across Mixing Valve cont’d
38. Pressure
High pressure keeps system from
boiling.
Agitation results from boiling carry
over lot of BS&W.
Recommended pressure 50-250psi.
39. Level
Operating level of water must be
maintained below lover electrode.
Conductivity of water cause electric current
flow and could shut down the electric
system.
If level is allowed to raise it will carry over
the interface with crude to the tower
causing tower upset and exchangers fouling
as well.
Low level cause carry over of crude with
effluent water.
40. Desalting problems
Under design Desalter for current crude oil
and through put.
Insufficient attention by operating person
Improper operating conditions.
Improper chemical dosage.
Inadequate water wash supply , rate and
quality.
41. Desalting Efficiency
Desalter efficiency can be calculated
as:
SE = (Si – So ) * 100 / Si
Where:
SE salt removal efficiency (%)
Si salt content of raw crude oil (ptb)
So salt content of desalted oil (ptb).
Ptb stands for Pounds per Thousand Barrels
Desalter efficiency should be 90-95 %
42. Trouble shooting
A high salt content in the
desalted crude oil
• Feed salt content high
• Increase the wash
• water rate
Wash water injection low
• Reduce the crude oil
• From
• Crude oil flow rate
exceeds the design
flow rate
• Increase the mix
value pressure drop
• Insufficient mixing of
the crude oil and wash
water
43. Trouble shooting
Oil in the desalter effluent
water
• "Interface" level too low
• Increase the interface
• Level
• Wide emulsion band at
the "interface"
• Inject a chemical or
dump the emulsion
• Excessive crude oil
wash water mixing
• Reduce the mix valve
pressure drop
Poor wash water quality • Check for any waste
in the wash water
source
44. Trouble shooting
High water carry over in
desalted crude oil
Crude temperature too low
Wash water flow rate too
high
• Reduce the wash
water flow rate and
commence
or increase chemical
Injection
• Excessive formation
water in the crude oil
• Reduce the interface
level and check the
effluent water valve