Expectation Value & Operator in Quantum Physics
•
0 likes•439 views
This document discusses writing the energy of a system using terms involving potential energy (U) and kinetic energy (K). It provides an equation to write energy (E) in terms of U and K, and gives values to plug into the equation to calculate the energy.
Report
Share
Report
Share
Download to read offline
Recommended
The Variational Method
This presentation shows a technique of how to solve for the approximate ground state energy using Schrodinger Equation in which the solution for wave function is not on hand
nuclear physics,unit 6
1. Nuclear physics studies the composition and interactions of atomic nuclei. Nuclei are composed of protons and neutrons, which interact via the strong nuclear force.
2. Nuclear reactions such as fission, fusion, and radioactive decay involve changes in nuclear binding energies and mass defects. Fission releases energy as heavy nuclei split into lighter nuclei, while fusion releases energy by combining light nuclei into heavier ones.
3. Key concepts include the strong nuclear force, mass defect and binding energy, radioactive decay and half-lives, and the types of radiation involved in different nuclear reactions like fission and fusion.
Dye laser
Dye lasers use an organic dye dissolved in a liquid as the active lasing medium and can produce a wide range of wavelengths. They work on the principle of population inversion using a pumping source like a flash lamp or other laser to excite the dye molecules. The major components are the active dye medium, pumping source, and resonator mirrors, with one mirror sometimes replaced by a diffraction grating to allow tuning of the output wavelength. Dye lasers offer tunability but have limitations in lifetime and output power.
Band theory of solids
This document provides an overview of semiconductor theory and devices. It begins by introducing the three categories of solids based on electrical conductivity: conductors, semiconductors, and insulators. It then discusses band theory, which models the allowed energy states in solids as continuous bands separated by forbidden gaps. Semiconductors are defined as having energy gaps small enough for thermal excitation of electrons between bands. The document covers models like the Kronig-Penney model that explain energy gaps. It also discusses how temperature affects resistivity in semiconductors by increasing the number of electrons excited into the conduction band.
Photo electric cell
A photoelectric cell converts light energy into electrical energy based on the photoelectric effect. It consists of electrodes where photons interact with electrons. There are three main types: photo-emissive cells emit electrons when light hits a photosensitive material; photovoltaic cells generate voltage without an external source by using semiconductors; photoconductive cells have a resistance that decreases when light hits, allowing current to flow. Photoelectric cells have various applications including cameras, lighting controls, and alarms.
Photo luminescence
This document discusses photoluminescence, which is the emission of light from a material upon exposure to light or other electromagnetic radiation. It begins by classifying luminescence and describing photoluminescence as a specific type involving absorption of photons and emission of photons as electrons return to lower energy states. The key processes of photoluminescence are excitation, relaxation, and emission. It then distinguishes between two types of photoluminescence - fluorescence, which is a rapid emission, and phosphorescence, which involves a spin-forbidden state and longer-lasting emission. The document concludes by outlining applications of photoluminescence spectroscopy for materials characterization and explaining the differences between photoluminescence and
Laser ppt 1
The document discusses the history and theory of lasers. It begins by explaining that a laser is an optical amplifier based on stimulated emission of radiation, as proposed by Einstein in 1917. The first laser was built in 1960 by Maiman using a ruby crystal. Key aspects discussed include:
- Laser operation requires a population inversion between energy levels.
- Common laser types include ruby, He-Ne, and semiconductor lasers.
- Semiconductor lasers use the stimulated emission from a p-n junction.
- Holograms were first made possible by the invention of the laser as a coherent light source. Applications of holography include credit cards, medical imaging, and art.
Recommended
The Variational Method
This presentation shows a technique of how to solve for the approximate ground state energy using Schrodinger Equation in which the solution for wave function is not on hand
nuclear physics,unit 6
1. Nuclear physics studies the composition and interactions of atomic nuclei. Nuclei are composed of protons and neutrons, which interact via the strong nuclear force.
2. Nuclear reactions such as fission, fusion, and radioactive decay involve changes in nuclear binding energies and mass defects. Fission releases energy as heavy nuclei split into lighter nuclei, while fusion releases energy by combining light nuclei into heavier ones.
3. Key concepts include the strong nuclear force, mass defect and binding energy, radioactive decay and half-lives, and the types of radiation involved in different nuclear reactions like fission and fusion.
Dye laser
Dye lasers use an organic dye dissolved in a liquid as the active lasing medium and can produce a wide range of wavelengths. They work on the principle of population inversion using a pumping source like a flash lamp or other laser to excite the dye molecules. The major components are the active dye medium, pumping source, and resonator mirrors, with one mirror sometimes replaced by a diffraction grating to allow tuning of the output wavelength. Dye lasers offer tunability but have limitations in lifetime and output power.
Band theory of solids
This document provides an overview of semiconductor theory and devices. It begins by introducing the three categories of solids based on electrical conductivity: conductors, semiconductors, and insulators. It then discusses band theory, which models the allowed energy states in solids as continuous bands separated by forbidden gaps. Semiconductors are defined as having energy gaps small enough for thermal excitation of electrons between bands. The document covers models like the Kronig-Penney model that explain energy gaps. It also discusses how temperature affects resistivity in semiconductors by increasing the number of electrons excited into the conduction band.
Photo electric cell
A photoelectric cell converts light energy into electrical energy based on the photoelectric effect. It consists of electrodes where photons interact with electrons. There are three main types: photo-emissive cells emit electrons when light hits a photosensitive material; photovoltaic cells generate voltage without an external source by using semiconductors; photoconductive cells have a resistance that decreases when light hits, allowing current to flow. Photoelectric cells have various applications including cameras, lighting controls, and alarms.
Photo luminescence
This document discusses photoluminescence, which is the emission of light from a material upon exposure to light or other electromagnetic radiation. It begins by classifying luminescence and describing photoluminescence as a specific type involving absorption of photons and emission of photons as electrons return to lower energy states. The key processes of photoluminescence are excitation, relaxation, and emission. It then distinguishes between two types of photoluminescence - fluorescence, which is a rapid emission, and phosphorescence, which involves a spin-forbidden state and longer-lasting emission. The document concludes by outlining applications of photoluminescence spectroscopy for materials characterization and explaining the differences between photoluminescence and
Laser ppt 1
The document discusses the history and theory of lasers. It begins by explaining that a laser is an optical amplifier based on stimulated emission of radiation, as proposed by Einstein in 1917. The first laser was built in 1960 by Maiman using a ruby crystal. Key aspects discussed include:
- Laser operation requires a population inversion between energy levels.
- Common laser types include ruby, He-Ne, and semiconductor lasers.
- Semiconductor lasers use the stimulated emission from a p-n junction.
- Holograms were first made possible by the invention of the laser as a coherent light source. Applications of holography include credit cards, medical imaging, and art.
Fermi level in extrinsic semiconductor
In extrinsic semiconductors, the Fermi level lies close to either the conduction or valence band depending on whether there are more electrons or holes. For n-type semiconductors, donor impurities add extra electrons to the conduction band, making the Fermi level closer to the conduction band. For p-type semiconductors, acceptor impurities create more holes in the valence band, positioning the Fermi level nearer to the valence band. The Fermi level equations show its relation to factors like temperature, carrier concentration, and band properties.
Statistical mechanics
This document discusses statistical mechanics and the distribution of energy among particles in a system. It provides 3 main types of statistical distributions based on the properties of identical particles: Maxwell-Boltzmann, Bose-Einstein, and Fermi-Dirac statistics. Maxwell-Boltzmann statistics applies to distinguishable particles, while Bose-Einstein and Fermi-Dirac apply to indistinguishable particles (bosons and fermions respectively), with the key difference being that fermions obey the Pauli exclusion principle. The document also discusses applications of these distributions, including the Maxwell-Boltzmann distribution law for molecular energies in an ideal gas.
Introduction to superconductivity
Superconductivity is the ability of certain materials to conduct electric current with practically zero resistance. This capacity produces interesting and potentially useful effects. For a material to behave as a superconductor, low temperatures are required.
BIO ELECTRODES PPT.pptx
Bio potential electrodes are transducers that convert ionic currents in the body into electronic currents that can be measured by electronic equipment. They provide an interface between the body and measuring devices. At the electrode-electrolyte interface, ions carry current in the body while electrons carry current in the electrode. Electrodes change ionic current into electronic current to allow for measurement. Motion artifacts can occur when electrodes are disturbed, but can be reduced by using non-polarizable electrodes like silver-silver chloride electrodes.
Hydrogen Spectra explained
1) The document explains Johann Balmer's empirical formula for the emission spectrum of hydrogen and how it relates the energies of emitted photons to integer values.
2) It then discusses early quantum models like the "electron in a box" model which showed energy must be quantized.
3) Finally, it describes Erwin Schrödinger's wave equation theory of quantum mechanics which successfully explained the quantization of energy levels in hydrogen and allowed prediction of atomic emission spectra.
Phonons lecture
This document discusses phonons and lattice vibrations in crystalline solids. It begins by introducing phonons as quantized vibrational energy states that propagate through the lattice. It then covers topics like modeling atomic vibrations, phonon dispersion relations, vibrational modes, and the density of phonon states. The document also discusses how phonons contribute to various thermodynamic and transport properties of solids, including specific heat, thermal expansion, and thermal conductivity. It compares the Debye and Einstein models for the phonon density of states and explains how phonon-phonon scattering influences thermal conductivity.
Laser lecture 01
This document provides an introduction to lasers and their applications. It begins with recommended textbooks on the subject, then provides a chart showing the laser spectrum and examples of different laser types and their wavelengths. The remainder of the document discusses the basic components and functioning of lasers, including the gain medium that provides stimulated emission, the pump source to create population inversion, and the optical cavity formed by mirrors. It also provides brief histories of the development of masers and the first ruby laser.
Hall effect
The document discusses the Hall effect, which is when a conductor carrying an electric current is placed perpendicular to a magnetic field. This causes the charges in the conductor to experience a force perpendicular to both the current and the magnetic field. This displacement of charges establishes a voltage difference known as the Hall voltage across the conductor. The Hall effect can be used to determine various properties of materials like charge carrier types and densities. Precise measurement techniques like Van der Pauw and Hall coefficient calculations are used to characterize semiconductor samples.
Pauli exclusion principle
The document discusses the Pauli Exclusion Principle and its importance in the periodic table. It explains that the principle states that no two electrons in an atom can have the same set of quantum numbers, and electrons must have opposite spins when occupying the same orbital. This principle allows electrons to be arranged in shells and is crucial for determining an element's chemical properties and for constructing the periodic table by blocks.
Dielectric and Magnetic Properties of materials,Polarizability,Dielectic loss...
In this PPT contains ,Dia,Para,Ferromagnetism,Clausius-Mossoti equation,Dielectric Loss ,Hysteresis,Hysteresis loss and its Applications,Determination of susceptibility,types of polarisation in mateials,relative permability
Solar cell
Solar cells, also known as photovoltaic cells, convert solar energy from the sun into electrical energy. They operate based on the photovoltaic effect where absorption of light by the solar cell's semiconductor material generates electron/hole pairs that can be harvested as an electric current. A typical solar cell consists of a thin wafer made from silicon with a positive and negative layer that form a p-n junction. When light hits the solar cell, photons are absorbed and electrons flow, generating direct current electricity that can be used or stored. The three main types of solar cells are monocrystalline, polycrystalline, and amorphous silicon cells which have varying efficiencies depending on the purity and structure of the
Basic electronics
This document provides an overview of basic electronics concepts including lattices, semiconductors, diodes, and transistors. It begins by defining lattices and their applications in mathematics. It then discusses superconductors, insulators, intrinsic and extrinsic semiconductors, and the band theory of conduction. Diodes and rectifiers are introduced, including half-wave and full-wave rectification circuits. The document concludes by explaining transistors, including bipolar junction transistors with npn and pnp configurations and their characteristics curves. Transistors are shown to have applications as amplifiers and switches in devices like LED spotlights and single transistor radios.
Quantum mechanical spin
1. The Stern-Gerlach experiment discovered that silver atoms split into two beams, indicating the presence of an intrinsic "spin" angular momentum of 1/2 beyond orbital angular momentum.
2. Elementary particles are classified as fermions, with half-integer spin, and bosons, with integer spin. The spin of the electron is represented by a two-component spinor.
3. In a magnetic field, the spin precesses around the field direction at the Larmor frequency, independent of initial spin orientation. This principle underlies paramagnetic resonance and nuclear magnetic resonance spectroscopy.
Nonlinear Optical Materials
This document discusses nonlinear optics and summarizes key topics covered:
- It describes the difference between linear and nonlinear optics, where linear optics involves weak light that is unchanged and nonlinear optics involves intense light that can induce effects and be manipulated.
- Nonlinear optics allows changing light properties like color and shape, and has applications in telecommunications and creating ultrashort events.
- Phenomena like sum and difference frequency generation are examples of second-order nonlinear optical effects. Phase matching is important for efficient nonlinear optical processes.
- Applications of nonlinear optics include optical phase conjugation, optical parametric oscillators, optical computing, optical switching, and optical data storage.
Lasers
basic concept of laser,population inversion,absorption,stimulated emission,spontaneous emission,laser drawbacks
Superconductivity
Superconductivity is a phenomenon where certain materials have zero electrical resistance and expel magnetic fields when cooled below a critical temperature. It was discovered in 1911 by Heike Kamerlingh Onnes. The Meissner effect describes how superconducting materials actively push magnetic fields out of their interior when transitioning to the superconducting state. The BCS theory explains superconductivity as electrons forming Cooper pairs that pass through the material unimpeded. Superconducting materials include various metals, metal alloys, iron-based compounds, cuprates, and organic materials. Applications include maglev trains, medical imaging, and more efficient power transmission.
STRUCTURE OF SODIUM D LINE
The document discusses the structure of the sodium D line spectrum. It explains that sodium has 11 electrons with one valence electron in the third shell. The state of the sodium atom is defined by the state of this valence electron. It also discusses that alkali metal atoms like sodium have one valence electron and diagrams the energy levels of sodium as the P, S, D levels with J values. It introduces the concept of screening constants which account for the number of closed shell electrons that screen the nucleus from the valence electron. Finally, it discusses the quantum defect value which depends on the orbital quantum number and is positive for sodium.
SCHRODINGER EQUATION
The Schrodinger equation plays the role of Newton's laws and conservation of energy in classical mechanics by predicting the future behavior of dynamic systems. It is a wave equation that uses the wavefunction to analytically and precisely predict the probability of events or outcomes, though not the strict determination of a detailed outcome. The kinetic and potential energies are transformed into the Hamiltonian which acts on the wavefunction to generate its evolution in time and space, giving the quantized energies of the system and the form of the wavefunction to calculate other properties.
BCS theory
Dr. K. Ramya gave a lecture on superconductivity. The BCS theory proposed by Bardeen, Cooper and Schrieffer explains electron-phonon interaction in superconductors. In normal conductors, electrons scatter off vibrating atoms, increasing resistance. In superconductors, electron-phonon interaction decreases scattering, lowering energy. Electrons form Cooper pairs with equal and opposite momenta. Below a critical temperature, interaction between Cooper pairs and the positive ion core vanishes, resulting in zero resistivity and superconductivity. Applications of superconductivity include more efficient electrical generators, transformers, transmission lines, magnetic levitation, fast electrical switching, computer logic and storage, SQUIDs for magnetometry, and
BCS THEORY NEW
This theory, developed by Bardeen, Cooper and Schrieffer, states that electrons experience an attractive interaction through the lattice that overcomes their normal repulsive interaction, forming Cooper pairs. At low temperatures, these pairs move without resistance through the lattice, causing the material to become a superconductor. The electron-lattice-electron interaction must be stronger than the direct electron-electron interaction for superconductivity to occur.
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...University of Maribor
Slides from talk:
Aleš Zamuda: Remote Sensing and Computational, Evolutionary, Supercomputing, and Intelligent Systems.
11th International Conference on Electrical, Electronics and Computer Engineering (IcETRAN), Niš, 3-6 June 2024
Inter-Society Networking Panel GRSS/MTT-S/CIS Panel Session: Promoting Connection and Cooperation
https://www.etran.rs/2024/en/home-english/More Related Content
What's hot
Fermi level in extrinsic semiconductor
In extrinsic semiconductors, the Fermi level lies close to either the conduction or valence band depending on whether there are more electrons or holes. For n-type semiconductors, donor impurities add extra electrons to the conduction band, making the Fermi level closer to the conduction band. For p-type semiconductors, acceptor impurities create more holes in the valence band, positioning the Fermi level nearer to the valence band. The Fermi level equations show its relation to factors like temperature, carrier concentration, and band properties.
Statistical mechanics
This document discusses statistical mechanics and the distribution of energy among particles in a system. It provides 3 main types of statistical distributions based on the properties of identical particles: Maxwell-Boltzmann, Bose-Einstein, and Fermi-Dirac statistics. Maxwell-Boltzmann statistics applies to distinguishable particles, while Bose-Einstein and Fermi-Dirac apply to indistinguishable particles (bosons and fermions respectively), with the key difference being that fermions obey the Pauli exclusion principle. The document also discusses applications of these distributions, including the Maxwell-Boltzmann distribution law for molecular energies in an ideal gas.
Introduction to superconductivity
Superconductivity is the ability of certain materials to conduct electric current with practically zero resistance. This capacity produces interesting and potentially useful effects. For a material to behave as a superconductor, low temperatures are required.
BIO ELECTRODES PPT.pptx
Bio potential electrodes are transducers that convert ionic currents in the body into electronic currents that can be measured by electronic equipment. They provide an interface between the body and measuring devices. At the electrode-electrolyte interface, ions carry current in the body while electrons carry current in the electrode. Electrodes change ionic current into electronic current to allow for measurement. Motion artifacts can occur when electrodes are disturbed, but can be reduced by using non-polarizable electrodes like silver-silver chloride electrodes.
Hydrogen Spectra explained
1) The document explains Johann Balmer's empirical formula for the emission spectrum of hydrogen and how it relates the energies of emitted photons to integer values.
2) It then discusses early quantum models like the "electron in a box" model which showed energy must be quantized.
3) Finally, it describes Erwin Schrödinger's wave equation theory of quantum mechanics which successfully explained the quantization of energy levels in hydrogen and allowed prediction of atomic emission spectra.
Phonons lecture
This document discusses phonons and lattice vibrations in crystalline solids. It begins by introducing phonons as quantized vibrational energy states that propagate through the lattice. It then covers topics like modeling atomic vibrations, phonon dispersion relations, vibrational modes, and the density of phonon states. The document also discusses how phonons contribute to various thermodynamic and transport properties of solids, including specific heat, thermal expansion, and thermal conductivity. It compares the Debye and Einstein models for the phonon density of states and explains how phonon-phonon scattering influences thermal conductivity.
Laser lecture 01
This document provides an introduction to lasers and their applications. It begins with recommended textbooks on the subject, then provides a chart showing the laser spectrum and examples of different laser types and their wavelengths. The remainder of the document discusses the basic components and functioning of lasers, including the gain medium that provides stimulated emission, the pump source to create population inversion, and the optical cavity formed by mirrors. It also provides brief histories of the development of masers and the first ruby laser.
Hall effect
The document discusses the Hall effect, which is when a conductor carrying an electric current is placed perpendicular to a magnetic field. This causes the charges in the conductor to experience a force perpendicular to both the current and the magnetic field. This displacement of charges establishes a voltage difference known as the Hall voltage across the conductor. The Hall effect can be used to determine various properties of materials like charge carrier types and densities. Precise measurement techniques like Van der Pauw and Hall coefficient calculations are used to characterize semiconductor samples.
Pauli exclusion principle
The document discusses the Pauli Exclusion Principle and its importance in the periodic table. It explains that the principle states that no two electrons in an atom can have the same set of quantum numbers, and electrons must have opposite spins when occupying the same orbital. This principle allows electrons to be arranged in shells and is crucial for determining an element's chemical properties and for constructing the periodic table by blocks.
Dielectric and Magnetic Properties of materials,Polarizability,Dielectic loss...
In this PPT contains ,Dia,Para,Ferromagnetism,Clausius-Mossoti equation,Dielectric Loss ,Hysteresis,Hysteresis loss and its Applications,Determination of susceptibility,types of polarisation in mateials,relative permability
Solar cell
Solar cells, also known as photovoltaic cells, convert solar energy from the sun into electrical energy. They operate based on the photovoltaic effect where absorption of light by the solar cell's semiconductor material generates electron/hole pairs that can be harvested as an electric current. A typical solar cell consists of a thin wafer made from silicon with a positive and negative layer that form a p-n junction. When light hits the solar cell, photons are absorbed and electrons flow, generating direct current electricity that can be used or stored. The three main types of solar cells are monocrystalline, polycrystalline, and amorphous silicon cells which have varying efficiencies depending on the purity and structure of the
Basic electronics
This document provides an overview of basic electronics concepts including lattices, semiconductors, diodes, and transistors. It begins by defining lattices and their applications in mathematics. It then discusses superconductors, insulators, intrinsic and extrinsic semiconductors, and the band theory of conduction. Diodes and rectifiers are introduced, including half-wave and full-wave rectification circuits. The document concludes by explaining transistors, including bipolar junction transistors with npn and pnp configurations and their characteristics curves. Transistors are shown to have applications as amplifiers and switches in devices like LED spotlights and single transistor radios.
Quantum mechanical spin
1. The Stern-Gerlach experiment discovered that silver atoms split into two beams, indicating the presence of an intrinsic "spin" angular momentum of 1/2 beyond orbital angular momentum.
2. Elementary particles are classified as fermions, with half-integer spin, and bosons, with integer spin. The spin of the electron is represented by a two-component spinor.
3. In a magnetic field, the spin precesses around the field direction at the Larmor frequency, independent of initial spin orientation. This principle underlies paramagnetic resonance and nuclear magnetic resonance spectroscopy.
Nonlinear Optical Materials
This document discusses nonlinear optics and summarizes key topics covered:
- It describes the difference between linear and nonlinear optics, where linear optics involves weak light that is unchanged and nonlinear optics involves intense light that can induce effects and be manipulated.
- Nonlinear optics allows changing light properties like color and shape, and has applications in telecommunications and creating ultrashort events.
- Phenomena like sum and difference frequency generation are examples of second-order nonlinear optical effects. Phase matching is important for efficient nonlinear optical processes.
- Applications of nonlinear optics include optical phase conjugation, optical parametric oscillators, optical computing, optical switching, and optical data storage.
Lasers
basic concept of laser,population inversion,absorption,stimulated emission,spontaneous emission,laser drawbacks
Superconductivity
Superconductivity is a phenomenon where certain materials have zero electrical resistance and expel magnetic fields when cooled below a critical temperature. It was discovered in 1911 by Heike Kamerlingh Onnes. The Meissner effect describes how superconducting materials actively push magnetic fields out of their interior when transitioning to the superconducting state. The BCS theory explains superconductivity as electrons forming Cooper pairs that pass through the material unimpeded. Superconducting materials include various metals, metal alloys, iron-based compounds, cuprates, and organic materials. Applications include maglev trains, medical imaging, and more efficient power transmission.
STRUCTURE OF SODIUM D LINE
The document discusses the structure of the sodium D line spectrum. It explains that sodium has 11 electrons with one valence electron in the third shell. The state of the sodium atom is defined by the state of this valence electron. It also discusses that alkali metal atoms like sodium have one valence electron and diagrams the energy levels of sodium as the P, S, D levels with J values. It introduces the concept of screening constants which account for the number of closed shell electrons that screen the nucleus from the valence electron. Finally, it discusses the quantum defect value which depends on the orbital quantum number and is positive for sodium.
SCHRODINGER EQUATION
The Schrodinger equation plays the role of Newton's laws and conservation of energy in classical mechanics by predicting the future behavior of dynamic systems. It is a wave equation that uses the wavefunction to analytically and precisely predict the probability of events or outcomes, though not the strict determination of a detailed outcome. The kinetic and potential energies are transformed into the Hamiltonian which acts on the wavefunction to generate its evolution in time and space, giving the quantized energies of the system and the form of the wavefunction to calculate other properties.
BCS theory
Dr. K. Ramya gave a lecture on superconductivity. The BCS theory proposed by Bardeen, Cooper and Schrieffer explains electron-phonon interaction in superconductors. In normal conductors, electrons scatter off vibrating atoms, increasing resistance. In superconductors, electron-phonon interaction decreases scattering, lowering energy. Electrons form Cooper pairs with equal and opposite momenta. Below a critical temperature, interaction between Cooper pairs and the positive ion core vanishes, resulting in zero resistivity and superconductivity. Applications of superconductivity include more efficient electrical generators, transformers, transmission lines, magnetic levitation, fast electrical switching, computer logic and storage, SQUIDs for magnetometry, and
BCS THEORY NEW
This theory, developed by Bardeen, Cooper and Schrieffer, states that electrons experience an attractive interaction through the lattice that overcomes their normal repulsive interaction, forming Cooper pairs. At low temperatures, these pairs move without resistance through the lattice, causing the material to become a superconductor. The electron-lattice-electron interaction must be stronger than the direct electron-electron interaction for superconductivity to occur.
What's hot (20)
Dielectric and Magnetic Properties of materials,Polarizability,Dielectic loss...
Dielectric and Magnetic Properties of materials,Polarizability,Dielectic loss...
Recently uploaded
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...University of Maribor
Slides from talk:
Aleš Zamuda: Remote Sensing and Computational, Evolutionary, Supercomputing, and Intelligent Systems.
11th International Conference on Electrical, Electronics and Computer Engineering (IcETRAN), Niš, 3-6 June 2024
Inter-Society Networking Panel GRSS/MTT-S/CIS Panel Session: Promoting Connection and Cooperation
https://www.etran.rs/2024/en/home-english/ANAMOLOUS SECONDARY GROWTH IN DICOT ROOTS.pptx
Abnormal or anomalous secondary growth in plants. It defines secondary growth as an increase in plant girth due to vascular cambium or cork cambium. Anomalous secondary growth does not follow the normal pattern of a single vascular cambium producing xylem internally and phloem externally.
bordetella pertussis.................................ppt
Bordettela is a gram negative cocobacilli spread by air born drop let
Equivariant neural networks and representation theory
Or: Beyond linear.
Abstract: Equivariant neural networks are neural networks that incorporate symmetries. The nonlinear activation functions in these networks result in interesting nonlinear equivariant maps between simple representations, and motivate the key player of this talk: piecewise linear representation theory.
Disclaimer: No one is perfect, so please mind that there might be mistakes and typos.
dtubbenhauer@gmail.com
Corrected slides: dtubbenhauer.com/talks.html
Shallowest Oil Discovery of Turkiye.pptx
The Petroleum System of the Çukurova Field - the Shallowest Oil Discovery of Türkiye, Adana
Deep Software Variability and Frictionless Reproducibility
Deep Software Variability and Frictionless ReproducibilityUniversity of Rennes, INSA Rennes, Inria/IRISA, CNRS
The ability to recreate computational results with minimal effort and actionable metrics provides a solid foundation for scientific research and software development. When people can replicate an analysis at the touch of a button using open-source software, open data, and methods to assess and compare proposals, it significantly eases verification of results, engagement with a diverse range of contributors, and progress. However, we have yet to fully achieve this; there are still many sociotechnical frictions.
Inspired by David Donoho's vision, this talk aims to revisit the three crucial pillars of frictionless reproducibility (data sharing, code sharing, and competitive challenges) with the perspective of deep software variability.
Our observation is that multiple layers — hardware, operating systems, third-party libraries, software versions, input data, compile-time options, and parameters — are subject to variability that exacerbates frictions but is also essential for achieving robust, generalizable results and fostering innovation. I will first review the literature, providing evidence of how the complex variability interactions across these layers affect qualitative and quantitative software properties, thereby complicating the reproduction and replication of scientific studies in various fields.
I will then present some software engineering and AI techniques that can support the strategic exploration of variability spaces. These include the use of abstractions and models (e.g., feature models), sampling strategies (e.g., uniform, random), cost-effective measurements (e.g., incremental build of software configurations), and dimensionality reduction methods (e.g., transfer learning, feature selection, software debloating).
I will finally argue that deep variability is both the problem and solution of frictionless reproducibility, calling the software science community to develop new methods and tools to manage variability and foster reproducibility in software systems.
Exposé invité Journées Nationales du GDR GPL 2024
Nucleic Acid-its structural and functional complexity.
This presentation explores a brief idea about the structural and functional attributes of nucleotides, the structure and function of genetic materials along with the impact of UV rays and pH upon them.
EWOCS-I: The catalog of X-ray sources in Westerlund 1 from the Extended Weste...
Context. With a mass exceeding several 104 M⊙ and a rich and dense population of massive stars, supermassive young star clusters
represent the most massive star-forming environment that is dominated by the feedback from massive stars and gravitational interactions
among stars.
Aims. In this paper we present the Extended Westerlund 1 and 2 Open Clusters Survey (EWOCS) project, which aims to investigate
the influence of the starburst environment on the formation of stars and planets, and on the evolution of both low and high mass stars.
The primary targets of this project are Westerlund 1 and 2, the closest supermassive star clusters to the Sun.
Methods. The project is based primarily on recent observations conducted with the Chandra and JWST observatories. Specifically,
the Chandra survey of Westerlund 1 consists of 36 new ACIS-I observations, nearly co-pointed, for a total exposure time of 1 Msec.
Additionally, we included 8 archival Chandra/ACIS-S observations. This paper presents the resulting catalog of X-ray sources within
and around Westerlund 1. Sources were detected by combining various existing methods, and photon extraction and source validation
were carried out using the ACIS-Extract software.
Results. The EWOCS X-ray catalog comprises 5963 validated sources out of the 9420 initially provided to ACIS-Extract, reaching a
photon flux threshold of approximately 2 × 10−8 photons cm−2
s
−1
. The X-ray sources exhibit a highly concentrated spatial distribution,
with 1075 sources located within the central 1 arcmin. We have successfully detected X-ray emissions from 126 out of the 166 known
massive stars of the cluster, and we have collected over 71 000 photons from the magnetar CXO J164710.20-455217.
Nucleophilic Addition of carbonyl compounds.pptx
Nucleophilic addition is the most important reaction of carbonyls. Not just aldehydes and ketones, but also carboxylic acid derivatives in general.
Carbonyls undergo addition reactions with a large range of nucleophiles.
Comparing the relative basicity of the nucleophile and the product is extremely helpful in determining how reversible the addition reaction is. Reactions with Grignards and hydrides are irreversible. Reactions with weak bases like halides and carboxylates generally don’t happen.
Electronic effects (inductive effects, electron donation) have a large impact on reactivity.
Large groups adjacent to the carbonyl will slow the rate of reaction.
Neutral nucleophiles can also add to carbonyls, although their additions are generally slower and more reversible. Acid catalysis is sometimes employed to increase the rate of addition.
The use of Nauplii and metanauplii artemia in aquaculture (brine shrimp).pptx
Although Artemia has been known to man for centuries, its use as a food for the culture of larval organisms apparently began only in the 1930s, when several investigators found that it made an excellent food for newly hatched fish larvae (Litvinenko et al., 2023). As aquaculture developed in the 1960s and ‘70s, the use of Artemia also became more widespread, due both to its convenience and to its nutritional value for larval organisms (Arenas-Pardo et al., 2024). The fact that Artemia dormant cysts can be stored for long periods in cans, and then used as an off-the-shelf food requiring only 24 h of incubation makes them the most convenient, least labor-intensive, live food available for aquaculture (Sorgeloos & Roubach, 2021). The nutritional value of Artemia, especially for marine organisms, is not constant, but varies both geographically and temporally. During the last decade, however, both the causes of Artemia nutritional variability and methods to improve poorquality Artemia have been identified (Loufi et al., 2024).
Brine shrimp (Artemia spp.) are used in marine aquaculture worldwide. Annually, more than 2,000 metric tons of dry cysts are used for cultivation of fish, crustacean, and shellfish larva. Brine shrimp are important to aquaculture because newly hatched brine shrimp nauplii (larvae) provide a food source for many fish fry (Mozanzadeh et al., 2021). Culture and harvesting of brine shrimp eggs represents another aspect of the aquaculture industry. Nauplii and metanauplii of Artemia, commonly known as brine shrimp, play a crucial role in aquaculture due to their nutritional value and suitability as live feed for many aquatic species, particularly in larval stages (Sorgeloos & Roubach, 2021).
Applied Science: Thermodynamics, Laws & Methodology.pdf
When I was asked to give a companion lecture in support of ‘The Philosophy of Science’ (https://shorturl.at/4pUXz) I decided not to walk through the detail of the many methodologies in order of use. Instead, I chose to employ a long standing, and ongoing, scientific development as an exemplar. And so, I chose the ever evolving story of Thermodynamics as a scientific investigation at its best.
Conducted over a period of >200 years, Thermodynamics R&D, and application, benefitted from the highest levels of professionalism, collaboration, and technical thoroughness. New layers of application, methodology, and practice were made possible by the progressive advance of technology. In turn, this has seen measurement and modelling accuracy continually improved at a micro and macro level.
Perhaps most importantly, Thermodynamics rapidly became a primary tool in the advance of applied science/engineering/technology, spanning micro-tech, to aerospace and cosmology. I can think of no better a story to illustrate the breadth of scientific methodologies and applications at their best.
What is greenhouse gasses and how many gasses are there to affect the Earth.
What are greenhouse gasses how they affect the earth and its environment what is the future of the environment and earth how the weather and the climate effects.
The binding of cosmological structures by massless topological defects
Assuming spherical symmetry and weak field, it is shown that if one solves the Poisson equation or the Einstein field
equations sourced by a topological defect, i.e. a singularity of a very specific form, the result is a localized gravitational
field capable of driving flat rotation (i.e. Keplerian circular orbits at a constant speed for all radii) of test masses on a thin
spherical shell without any underlying mass. Moreover, a large-scale structure which exploits this solution by assembling
concentrically a number of such topological defects can establish a flat stellar or galactic rotation curve, and can also deflect
light in the same manner as an equipotential (isothermal) sphere. Thus, the need for dark matter or modified gravity theory is
mitigated, at least in part.
Sharlene Leurig - Enabling Onsite Water Use with Net Zero Water
Sharlene Leurig - Enabling Onsite Water Use with Net Zero WaterTexas Alliance of Groundwater Districts
Presented at June 6-7 Texas Alliance of Groundwater Districts Business Meeting20240520 Planning a Circuit Simulator in JavaScript.pptx
Evaporation step counter work. I have done a physical experiment.
(Work in progress.)
Recently uploaded (20)
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...
bordetella pertussis.................................ppt
bordetella pertussis.................................ppt
Equivariant neural networks and representation theory
Equivariant neural networks and representation theory
Deep Software Variability and Frictionless Reproducibility
Deep Software Variability and Frictionless Reproducibility
Nucleic Acid-its structural and functional complexity.
Nucleic Acid-its structural and functional complexity.
EWOCS-I: The catalog of X-ray sources in Westerlund 1 from the Extended Weste...
EWOCS-I: The catalog of X-ray sources in Westerlund 1 from the Extended Weste...
aziz sancar nobel prize winner: from mardin to nobel
aziz sancar nobel prize winner: from mardin to nobel
The use of Nauplii and metanauplii artemia in aquaculture (brine shrimp).pptx
The use of Nauplii and metanauplii artemia in aquaculture (brine shrimp).pptx
Applied Science: Thermodynamics, Laws & Methodology.pdf
Applied Science: Thermodynamics, Laws & Methodology.pdf
What is greenhouse gasses and how many gasses are there to affect the Earth.
What is greenhouse gasses and how many gasses are there to affect the Earth.
The binding of cosmological structures by massless topological defects
The binding of cosmological structures by massless topological defects
mô tả các thí nghiệm về đánh giá tác động dòng khí hóa sau đốt
mô tả các thí nghiệm về đánh giá tác động dòng khí hóa sau đốt
Sharlene Leurig - Enabling Onsite Water Use with Net Zero Water
Sharlene Leurig - Enabling Onsite Water Use with Net Zero Water
20240520 Planning a Circuit Simulator in JavaScript.pptx
20240520 Planning a Circuit Simulator in JavaScript.pptx
Expectation Value & Operator in Quantum Physics
- 8. Energy operator is The energy for a system can be written as Which can be in exchange by the terms of & .
- 15. Given, By put the value,