Executive summary..
•
0 likes•150 views
SGS Industrial Service offers factory acceptance testing to verify equipment and plants meet contractual requirements before delivery or installation. A factory acceptance test checks completeness, functionality, and important documentation. It is recommended to ensure high quality and integrity as some vendors may rush testing. SGS provides a customized testing procedure executed by a qualified, independent third party to give clients confidence the equipment performs as expected.
Report
Share
Report
Share
Recommended
Witness Inspection & Testing for your industry
Witness inspection and testing is very important for the industries as sometimes accidents do happen in middle of the production or construction phase, and this may or may not be due to equipment defects or the handling defects of these large and huge equipments.
The challenges facing in pharmaceutical maintenance
Maintenance strategies for the pharmaceutical industry.
Maintenance and service-related items are often the second-largest budget element in a laboratory after salaries and benefits
Importance of instrument calibration
In any kind of manufacturing industry, the calibration of instrument plays a very important role and also it occupies a very significant place. Whenever a product comes into existence, back of it there's a perfect flow calibration. Calibration is a set of operations, which under certain conditions build relationships amongst values indicated by a measuring instrument.
Calibration of Analytical instrument
This document discusses calibration of instruments. It defines calibration as comparing a test instrument to a more precise standard to determine any errors. Calibration is important for accurate measurements and maintaining traceability. There are three main types of calibration: electro-technical, non-electrical, and on-site calibration. Calibration management systems require unique identification of instruments, calibration procedures and schedules, standards traceable to national standards, and trained personnel. Calibration helps minimize errors and ensure accurate quality control and dispute resolution.
Overview of Instrument Calibration
NCQC is sharing information about Instrument Calibration and its requirements in organizations. This ppt presentation helps organization and management trainee to understand purpose, importance and requirements of calibration management system.
Engine maintenance guide
This document provides guidance on engine management including preventative maintenance, inspections, and repair. It discusses the importance of regular oil, filter, and coolant changes as well as using the correct fluids. Inspections, including monitoring for warning signs of issues, are recommended alongside fluid analysis testing. Following the maintenance and inspection guidelines can maximize the life of engine components.
Instrument Calibration Management System
Werardt offers various systems like, ERP, Plant Maintenance, Sales & Distribution, etc. to the Industry apart from specialized systems for the past 15 years.
I C M - The Instrument Calibration Management System is a comprehensive, easy-to-use SOFTWARE solution with the ability to maintain long term, organized, and readily accessible calibration records of all types of Instruments.
Many comprehensive reports are generated including Master Calibration Planner.
Please contact Werardt Systemss Pvt Ltd., Pune, India. Phone : 91-20-25285256, 25285257. email: business@werardt.com
power-outage-quality-management-factsheet
ABS Group provides outage quality management services to help power plant owners minimize costs and effectively manage maintenance outages. They oversee the entire outage management process, including planning, contractor work, and inspections, to ensure quality, safety, and timely completion. ABS Group staff have decades of experience managing all aspects of outages for equipment like gas turbines, steam turbines, and generators. They provide owner's representation and independent oversight to confirm proper procedures are followed.
Recommended
Witness Inspection & Testing for your industry
Witness inspection and testing is very important for the industries as sometimes accidents do happen in middle of the production or construction phase, and this may or may not be due to equipment defects or the handling defects of these large and huge equipments.
The challenges facing in pharmaceutical maintenance
Maintenance strategies for the pharmaceutical industry.
Maintenance and service-related items are often the second-largest budget element in a laboratory after salaries and benefits
Importance of instrument calibration
In any kind of manufacturing industry, the calibration of instrument plays a very important role and also it occupies a very significant place. Whenever a product comes into existence, back of it there's a perfect flow calibration. Calibration is a set of operations, which under certain conditions build relationships amongst values indicated by a measuring instrument.
Calibration of Analytical instrument
This document discusses calibration of instruments. It defines calibration as comparing a test instrument to a more precise standard to determine any errors. Calibration is important for accurate measurements and maintaining traceability. There are three main types of calibration: electro-technical, non-electrical, and on-site calibration. Calibration management systems require unique identification of instruments, calibration procedures and schedules, standards traceable to national standards, and trained personnel. Calibration helps minimize errors and ensure accurate quality control and dispute resolution.
Overview of Instrument Calibration
NCQC is sharing information about Instrument Calibration and its requirements in organizations. This ppt presentation helps organization and management trainee to understand purpose, importance and requirements of calibration management system.
Engine maintenance guide
This document provides guidance on engine management including preventative maintenance, inspections, and repair. It discusses the importance of regular oil, filter, and coolant changes as well as using the correct fluids. Inspections, including monitoring for warning signs of issues, are recommended alongside fluid analysis testing. Following the maintenance and inspection guidelines can maximize the life of engine components.
Instrument Calibration Management System
Werardt offers various systems like, ERP, Plant Maintenance, Sales & Distribution, etc. to the Industry apart from specialized systems for the past 15 years.
I C M - The Instrument Calibration Management System is a comprehensive, easy-to-use SOFTWARE solution with the ability to maintain long term, organized, and readily accessible calibration records of all types of Instruments.
Many comprehensive reports are generated including Master Calibration Planner.
Please contact Werardt Systemss Pvt Ltd., Pune, India. Phone : 91-20-25285256, 25285257. email: business@werardt.com
power-outage-quality-management-factsheet
ABS Group provides outage quality management services to help power plant owners minimize costs and effectively manage maintenance outages. They oversee the entire outage management process, including planning, contractor work, and inspections, to ensure quality, safety, and timely completion. ABS Group staff have decades of experience managing all aspects of outages for equipment like gas turbines, steam turbines, and generators. They provide owner's representation and independent oversight to confirm proper procedures are followed.
Equipment Qualification
Equipment used in pharmaceuticals dosage form manufacturing need to observe continuous qualification to monitor its performance and Concept of URS ,DQ, IQ,OQ,PQ,MQ...
updated CV (2)
V.C. Babuumanath is seeking a Quality Incharge position with over 10 years of experience in quality assurance and supply chain management. He has a Diploma in Mechanical Engineering and is proficient in quality management systems including ISO 9001, ISO/TS 16949, APQP, PPAP, SPC, and Lean Six Sigma. Currently he is the Quality Incharge at RRB Engineering, where he monitors supplier quality, conducts audits, manages new product development processes, and reduces customer complaints. He aims to utilize his analytical and troubleshooting skills to contribute to organizational growth.
FACTORY ACCEPTANCE TEST
In this slide contains Introduction, overview and details of FACTORY ACCEPTANCE TEST
Presented by: P.NARESH (Department of pharmaceutical analysis).RIPER, anantapur
Mangesh-Resume
This document appears to be a resume for Mangesh B. Chaure. It outlines his work experience including roles as a QA/QC Engineer for Urban Transit Pvt. Ltd. on the Mumbai Monorail Project from 2010 to present, and previous roles in quality control and assurance. It also lists his professional qualifications including an ASNT NDT Level II certification and a Post Graduate Diploma in Piping Engineering.
Lean Calibration Management
A Lean Calibration Management Program can help companies reduce costs and improve efficiencies by optimizing calibration practices. Common practices that waste time and money include surprise calibrations that impact production, tools being used when past due for calibration, and a lack of control over the calibration process. Applying Lean manufacturing principles like eliminating waste, standardizing processes, and improving workflow can streamline calibration and reduce costs while maintaining quality standards. An online secured calibration database managed by a third-party calibration vendor can consolidate the supply chain and eliminate non-value added tasks like double data entry of calibration records.
Calibration and validation ,difference , ph meter and weigh balance calibrati...
Calibration and validation , ph meter and weigh balance calibration SOPs procedure with difference and frequency of doing this hope this will be helpful for you... also comment if needed
Qualification validation ppt_171116
Qualification and validation activities were taking place during Quality Week from November 14-19, 2016. Qualification proves that systems and equipment work correctly, while validation proves procedures lead to expected results. There are various types of qualification including design (DQ), installation (IQ), operational (OQ), and performance (PQ) qualification. Validation can be prospective, retrospective, or concurrent. Analyst qualification requires a minimum of two analysts to run tests in triplicate to demonstrate accuracy of 98-102%. Uncertainty encompasses variability that could be reasonably attributed to measurement results and includes components evaluated statistically or from experience.
Apc 2
360oAir Pollution Control Technologies TM is an environmental engineering firm that has been in business for over 60 years. It has over 850 employees in 30 offices across the US, Puerto Rico, Mexico, and the UK. The firm provides a full range of air quality and environmental services including air permitting, testing, modeling, compliance audits, and air pollution control system design, installation, and maintenance. It has extensive experience in all aspects of air quality projects from initial analysis through long-term support.
Calibration Singapore
Pipette calibration is employed in medical and Calibration laboratory Singapore settings. Accuracy is critical in these environments, therefore the pipette must be calibrated correctly.
Calibration management system
The document discusses calibration issues affecting an egg production company. It summarizes that production costs have risen and egg yields have fallen, but medium and small egg production has increased to offset some losses. The real problem was identified as inaccurate calibration of the balance scales over time, leading to eggs being misclassified. The company plans to implement a systematic calibration management program to properly monitor, verify, and calibrate instruments on a regular schedule.
Calibration
Calibration involves comparing a known standard measurement to an unknown measurement from a unit under test to determine the unit's accuracy, repeatability, precision, and other characteristics. Calibration is important because measuring devices' accuracy degrades over time, and accurate devices improve product quality. A measuring device should be calibrated according to the manufacturer's recommendations, after any shocks, and periodically like annually or quarterly. The costs of an uncalibrated device's errors could outweigh calibration costs, so regular calibration is recommended.
Bob Price - Mechanical Engineer
Bob Price is a mechanical engineer with over 20 years of experience in product and process development for the medical device industry. He has experience designing components and fixtures, transferring products to manufacturing, and ensuring products meet necessary standards through testing. His skills include product development, process development, validation testing, CAD and machine shop skills. He is seeking a role where he can utilize his engineering and manufacturing experience.
Six sigma project
This is my academic project. Our company had two problems 1) Battery charging issue 2) Customer Service. We solved both these problems by using DMAIC and PDSA methodologies.
Equipment qualification
This document provides an overview of equipment qualification terminology and processes. It discusses conducting a risk assessment to determine validation requirements and maintaining qualified equipment. The key points covered include defining user requirements, performing installation qualification to verify proper installation, and operational qualification to confirm the equipment operates as intended. Maintaining qualification involves ongoing change control and periodic review.
K+S Repair Process
All parts received are logged into the Repair Order Tracking System, photographed, and tagged with a barcode to track them through the repair process. Engineers then evaluate the parts to determine the cause of failure and required repairs. Customers are provided a quote for approval before repairs are made. The system links parts to the correct repair procedures and testing equipment. Upon completion, a report is sent with the part detailing repairs, tests, findings and recommendations. Parts are then packed and shipped according to customer requirements.
Maintenance Reliability
The document discusses issues with reactive maintenance approaches and outlines strategies for more proactive maintenance through predictive maintenance. It provides examples of potential failure curves that can help identify issues before failure. Successful maintenance requires planning, scheduling, predictive tools, and integrated processes between maintenance, purchasing, and other teams. Leaders must buy into developing maintenance foundations through training, teams, and computerized maintenance management systems.
Qualification & validation concept & terminology
The document discusses concepts and terminology related to qualification and validation of equipment and systems. It defines qualification as proving that premises, systems and equipment are properly installed and work correctly. Validation is defined as proving that processes, procedures or methods consistently lead to expected results. The document provides definitions and descriptions of key terms in validation including validation master plan, user requirement specification, functional specification, design specification, factory acceptance testing, site acceptance testing, design qualification, installation qualification, operational qualification, process/performance qualification, protocols, reports, and types of validation.
FARHAD KARAMJAN1
Farhad Karamjani has over 20 years of experience in quality control and assurance, seeking a position utilizing his skills. He has extensive experience performing inspections, audits, and monitoring to ensure adherence to quality standards like ISO 9000. Karamjani is proficient with inspection tools and calibration software, and has experience programming and operating CMM and Gage Pack calibration software. He has worked as a quality technician and team leader for several manufacturing companies, performing tasks like first article inspections, dimensional inspections, calibration, and ensuring compliance.
Mechanic Calibration Singapore
The exact process of kit calibration shall vary consistent with the sort of instrument, how critical its role is within the operation and standards that are followed for the calibration purpose. Mentioned below may be a typical process that must be followed for equipment calibration.
Penalties& política
1) Os sindicatos dos controladores aéreos decidiram desconvocar a greve que estava prevista para os próximos cinco dias após abrirem novas vias de diálogo com o Governo.
2) A NAV Portugal espera agora compromissos concretos do Governo para resolver a situação financeira da empresa e garantir os empregos.
3) A TAP está a reprogramar voos e pede aos passageiros que confirmem o seu voo antes de viajar devido à desconvocação da greve.
Inteligencia emocional ensayo
El documento describe cómo la inteligencia emocional y el control de las emociones influyen en la vida laboral. Explica que las personas que aprenden a reconocer y regular sus propias emociones y las de los demás tienden a tener más éxito en el trabajo. También señala que las personas con problemas de manejo emocional suelen crear un ambiente laboral estresante que afecta negativamente su desempeño y el de sus compañeros. Finalmente, concluye que el control adecuado de las emociones es fundamental para tener un desempeño
More Related Content
What's hot
Equipment Qualification
Equipment used in pharmaceuticals dosage form manufacturing need to observe continuous qualification to monitor its performance and Concept of URS ,DQ, IQ,OQ,PQ,MQ...
updated CV (2)
V.C. Babuumanath is seeking a Quality Incharge position with over 10 years of experience in quality assurance and supply chain management. He has a Diploma in Mechanical Engineering and is proficient in quality management systems including ISO 9001, ISO/TS 16949, APQP, PPAP, SPC, and Lean Six Sigma. Currently he is the Quality Incharge at RRB Engineering, where he monitors supplier quality, conducts audits, manages new product development processes, and reduces customer complaints. He aims to utilize his analytical and troubleshooting skills to contribute to organizational growth.
FACTORY ACCEPTANCE TEST
In this slide contains Introduction, overview and details of FACTORY ACCEPTANCE TEST
Presented by: P.NARESH (Department of pharmaceutical analysis).RIPER, anantapur
Mangesh-Resume
This document appears to be a resume for Mangesh B. Chaure. It outlines his work experience including roles as a QA/QC Engineer for Urban Transit Pvt. Ltd. on the Mumbai Monorail Project from 2010 to present, and previous roles in quality control and assurance. It also lists his professional qualifications including an ASNT NDT Level II certification and a Post Graduate Diploma in Piping Engineering.
Lean Calibration Management
A Lean Calibration Management Program can help companies reduce costs and improve efficiencies by optimizing calibration practices. Common practices that waste time and money include surprise calibrations that impact production, tools being used when past due for calibration, and a lack of control over the calibration process. Applying Lean manufacturing principles like eliminating waste, standardizing processes, and improving workflow can streamline calibration and reduce costs while maintaining quality standards. An online secured calibration database managed by a third-party calibration vendor can consolidate the supply chain and eliminate non-value added tasks like double data entry of calibration records.
Calibration and validation ,difference , ph meter and weigh balance calibrati...
Calibration and validation , ph meter and weigh balance calibration SOPs procedure with difference and frequency of doing this hope this will be helpful for you... also comment if needed
Qualification validation ppt_171116
Qualification and validation activities were taking place during Quality Week from November 14-19, 2016. Qualification proves that systems and equipment work correctly, while validation proves procedures lead to expected results. There are various types of qualification including design (DQ), installation (IQ), operational (OQ), and performance (PQ) qualification. Validation can be prospective, retrospective, or concurrent. Analyst qualification requires a minimum of two analysts to run tests in triplicate to demonstrate accuracy of 98-102%. Uncertainty encompasses variability that could be reasonably attributed to measurement results and includes components evaluated statistically or from experience.
Apc 2
360oAir Pollution Control Technologies TM is an environmental engineering firm that has been in business for over 60 years. It has over 850 employees in 30 offices across the US, Puerto Rico, Mexico, and the UK. The firm provides a full range of air quality and environmental services including air permitting, testing, modeling, compliance audits, and air pollution control system design, installation, and maintenance. It has extensive experience in all aspects of air quality projects from initial analysis through long-term support.
Calibration Singapore
Pipette calibration is employed in medical and Calibration laboratory Singapore settings. Accuracy is critical in these environments, therefore the pipette must be calibrated correctly.
Calibration management system
The document discusses calibration issues affecting an egg production company. It summarizes that production costs have risen and egg yields have fallen, but medium and small egg production has increased to offset some losses. The real problem was identified as inaccurate calibration of the balance scales over time, leading to eggs being misclassified. The company plans to implement a systematic calibration management program to properly monitor, verify, and calibrate instruments on a regular schedule.
Calibration
Calibration involves comparing a known standard measurement to an unknown measurement from a unit under test to determine the unit's accuracy, repeatability, precision, and other characteristics. Calibration is important because measuring devices' accuracy degrades over time, and accurate devices improve product quality. A measuring device should be calibrated according to the manufacturer's recommendations, after any shocks, and periodically like annually or quarterly. The costs of an uncalibrated device's errors could outweigh calibration costs, so regular calibration is recommended.
Bob Price - Mechanical Engineer
Bob Price is a mechanical engineer with over 20 years of experience in product and process development for the medical device industry. He has experience designing components and fixtures, transferring products to manufacturing, and ensuring products meet necessary standards through testing. His skills include product development, process development, validation testing, CAD and machine shop skills. He is seeking a role where he can utilize his engineering and manufacturing experience.
Six sigma project
This is my academic project. Our company had two problems 1) Battery charging issue 2) Customer Service. We solved both these problems by using DMAIC and PDSA methodologies.
Equipment qualification
This document provides an overview of equipment qualification terminology and processes. It discusses conducting a risk assessment to determine validation requirements and maintaining qualified equipment. The key points covered include defining user requirements, performing installation qualification to verify proper installation, and operational qualification to confirm the equipment operates as intended. Maintaining qualification involves ongoing change control and periodic review.
K+S Repair Process
All parts received are logged into the Repair Order Tracking System, photographed, and tagged with a barcode to track them through the repair process. Engineers then evaluate the parts to determine the cause of failure and required repairs. Customers are provided a quote for approval before repairs are made. The system links parts to the correct repair procedures and testing equipment. Upon completion, a report is sent with the part detailing repairs, tests, findings and recommendations. Parts are then packed and shipped according to customer requirements.
Maintenance Reliability
The document discusses issues with reactive maintenance approaches and outlines strategies for more proactive maintenance through predictive maintenance. It provides examples of potential failure curves that can help identify issues before failure. Successful maintenance requires planning, scheduling, predictive tools, and integrated processes between maintenance, purchasing, and other teams. Leaders must buy into developing maintenance foundations through training, teams, and computerized maintenance management systems.
Qualification & validation concept & terminology
The document discusses concepts and terminology related to qualification and validation of equipment and systems. It defines qualification as proving that premises, systems and equipment are properly installed and work correctly. Validation is defined as proving that processes, procedures or methods consistently lead to expected results. The document provides definitions and descriptions of key terms in validation including validation master plan, user requirement specification, functional specification, design specification, factory acceptance testing, site acceptance testing, design qualification, installation qualification, operational qualification, process/performance qualification, protocols, reports, and types of validation.
FARHAD KARAMJAN1
Farhad Karamjani has over 20 years of experience in quality control and assurance, seeking a position utilizing his skills. He has extensive experience performing inspections, audits, and monitoring to ensure adherence to quality standards like ISO 9000. Karamjani is proficient with inspection tools and calibration software, and has experience programming and operating CMM and Gage Pack calibration software. He has worked as a quality technician and team leader for several manufacturing companies, performing tasks like first article inspections, dimensional inspections, calibration, and ensuring compliance.
Mechanic Calibration Singapore
The exact process of kit calibration shall vary consistent with the sort of instrument, how critical its role is within the operation and standards that are followed for the calibration purpose. Mentioned below may be a typical process that must be followed for equipment calibration.
What's hot (19)
Calibration and validation ,difference , ph meter and weigh balance calibrati...
Calibration and validation ,difference , ph meter and weigh balance calibrati...
Viewers also liked
Penalties& política
1) Os sindicatos dos controladores aéreos decidiram desconvocar a greve que estava prevista para os próximos cinco dias após abrirem novas vias de diálogo com o Governo.
2) A NAV Portugal espera agora compromissos concretos do Governo para resolver a situação financeira da empresa e garantir os empregos.
3) A TAP está a reprogramar voos e pede aos passageiros que confirmem o seu voo antes de viajar devido à desconvocação da greve.
Inteligencia emocional ensayo
El documento describe cómo la inteligencia emocional y el control de las emociones influyen en la vida laboral. Explica que las personas que aprenden a reconocer y regular sus propias emociones y las de los demás tienden a tener más éxito en el trabajo. También señala que las personas con problemas de manejo emocional suelen crear un ambiente laboral estresante que afecta negativamente su desempeño y el de sus compañeros. Finalmente, concluye que el control adecuado de las emociones es fundamental para tener un desempeño
Rubrica de evaluacion_mat_fin
Este documento presenta el plan de estudios y actividades semanales para un curso de Matemática Financiera dividido en 6 semanas. Cada semana, los estudiantes deben completar una actividad en la cafetería virtual y un cuestionario sobre el capítulo correspondiente, y participar en el foro siguiendo las instrucciones del tutor para comentar las publicaciones de sus compañeros y ganar puntos. Al completar todas las actividades semanales, los estudiantes obtendrán un puntaje total de 100 para el curso.
¿Qué es electricidad?
La electricidad es una forma de energía que puede mover motores, generar calor o proveer iluminación. Se compara su flujo en un circuito al agua en un tubo, midiendo la corriente en amperios, el voltaje en voltios y la resistencia en ohmios. Los riesgos incluyen choque eléctrico, tetanización y fibrilación ventricular, dependiendo de factores como el tipo y nivel de corriente, tiempo de contacto y resistencia del cuerpo. En la minería, la electricidad se usa ampliamente y se ha perdido
Instrucciones
Este documento presenta 4 problemas de matemáticas que involucran funciones, probabilidad, ecuaciones diferenciales y optimización. Los problemas incluyen determinar si una función es una densidad de probabilidad, calcular la probabilidad entre valores, encontrar el valor esperado de una variable, modelar el crecimiento de una epidemia, representar gráficamente una función, calcular la altura de saltos decrecientes de una pelota, determinar la distancia total recorrida por la pelota, y encontrar los valores óptimos de variables para maximizar una función de producción.
Datos 1
El documento pide a un estudiante de 3 años que proporcione sus datos personales, incluyendo su nombre, edad, color preferido y una huella digital. El estudiante debe completar esta información como parte de una actividad escolar en su clase de nivel inicial.
Examen 1ra U
Este documento proporciona respuestas sobre cómo crear y estructurar un documento HTML básico. Explica que un documento HTML se divide en las secciones head y body, y cómo agregar un título, párrafos, cambiar el tamaño de la fuente, insertar enlaces de texto e imágenes, y crear la estructura básica de una página web con diferentes etiquetas HTML.
Deborah Hill Graduation Certificate
This certificate certifies that Deborah Hill has completed the prescribed course of instruction in the Microsoft .NET Master's Program as developed and taught by SetFocus, commencing on June 14, 2012. It is signed by Michael Landau, CEO and President of SetFocus, to verify Deborah Hill's completion of the program.
Vietnam visa approval letter
Indochina Treks Travel Co.,Ltd is a travel company located at 24 Au Trieu Str in Hanoi's Hoan Kiem District. It can be contacted by phone at (84) 4 66821230 or fax at (84) 4 33769113. The company's website is www.visatovietnam.gov.vn and its email is info@visatovietnam.gov.vn. It offers luxury cruises on Halong Bay and the Mekong River as well as trains between Hanoi and Sapa.
Tecnologia sistemica de entrenamiento
El documento describe la Tecnología Sistémica de Entrenamiento, un marco conceptual y conjunto de herramientas para generar aprendizaje transformacional en ejecutivos mediante experiencias de participación personal y de equipo dentro y fuera del salón de clases. El objetivo es desarrollar competencias que permitan a los ejecutivos lograr resultados desafiantes, una relación potenciada con la empresa y los clientes, y adoptar una perspectiva creativa en lugar de reactiva. La tecnología surge de la integración de pensamiento sistémico, coaching
E&d sound
El anuncio ofrece la venta de un crossover profesional de la marca BSS modelo FDS-360. El equipo es estéreo de 2 vías o mono de 3/4 vías con filtros de cuarto orden y características como separación de medios, conmutación de polaridad, corrección de fase hasta 360 grados y LEDs indicadores. La empresa también ofrece la venta de otros equipos de audio y video profesionales de marcas reconocidas.
FACE
FACE //LG77。XYZ// FACE 『BU797』.『COM』 FACE 『LG777』.『XYZ』 FACE ＼【 FUN88。CO。ＫＲ】＼ FACE 『LG777』.『XYZ』 FACE 『BU797』.『COM』 FACE //LG77。XYZ// FACE ＼【 FUN88。CO。ＫＲ】＼ FACE //BU797。СΟΜ// FACE ＼【 FUN88。CO。ＫＲ】＼ FACE 『BU797』.『COM』 FACE 『BU797』.『COM』 FACE //LG77。XYZ// FACE //LG77。XYZ// FACE 『BU797』.『COM』 FACE //LG77。XYZ// FACE 『LG777』.『XYZ』 FACE 『LG777』.『XYZ』 FACE ＼【 FUN88。CO。ＫＲ】＼ FACE //BU797。СΟΜ// FACE 『LG777』.『XYZ』 FACE 『BU797』.『COM』 FACE //LG77。XYZ// FACE //LG77。XYZ// FACE //LG77。XYZ// FACE 『LG777』.『XYZ』 FACE ＼【 FUN88。CO。ＫＲ】＼ FACE //LG77。XYZ// FACE //BU797。СΟΜ// FACE ＼【 FUN88。CO。ＫＲ】＼ FACE 『LG777』.『XYZ』 FACE //LG77。XYZ// FACE //BU797。СΟΜ// FACE ＼【 FUN88。CO。ＫＲ】＼ FACE //BU797。СΟΜ// FACE //LG77。XYZ// FACE 『BU797』.『COM』 FACE ＼【 FUN88。CO。ＫＲ】＼ FACE 『LG777』.『XYZ』 FACE 『LG777』.『XYZ』 FACE //LG77。XYZ// FACE //LG77。XYZ// FACE 『LG777』.『XYZ』 FACE 『BU797』.『COM』 FACE 『LG777』.『XYZ』 FACE 『LG777』.『XYZ』 FACE //BU797。СΟΜ// FACE ＼【 FUN88。CO。ＫＲ】＼ FACE 『LG777』.『XYZ』 FACE ＼【 FUN88。CO。ＫＲ】＼ FACE //BU797。СΟΜ// FACE 『LG777』.『XYZ』 FACE ＼【 FUN88。CO。ＫＲ】＼ FACE //BU797。СΟΜ// FACE 『BU797』.『COM』 FACE //BU797。СΟΜ// FACE //BU797。СΟΜ// FACE 『LG777』.『XYZ』 FACE 『BU797』.『COM』 FACE ＼【 FUN88。CO。ＫＲ】＼ FACE //BU797。СΟΜ// FACE 『LG777』.『XYZ』 FACE 『LG777』.『XYZ』 FACE ＼【 FUN88。CO。ＫＲ】＼ FACE ＼【 FUN88。CO。ＫＲ】＼ FACE //BU797。СΟΜ// FACE 『BU797』.『COM』 FACE //BU797。СΟΜ// FACE 『BU797』.『COM』 FACE 『BU797』.『COM』 FACE ＼【 FUN88。CO。ＫＲ】＼ FACE 『BU797』.『COM』 FACE 『BU797』.『COM』 FACE ＼【 FUN88。CO。ＫＲ】＼ FACE 『LG777』.『XYZ』 FACE 『BU797』.『COM』 FACE 『BU797』.『COM』 FACE //LG77。XYZ// FACE //LG77。XYZ// FACE 『BU797』.『COM』
JPCL jz300275f McDaniel Presentation
This presentation has been moved. To view this presentation, please visit http://pubs.acs.org/iapps/liveslides/pages/index.htm?mscNo=jz300275f
Viewers also liked (19)
Similar to Executive summary..
URS - USER REQUIREMENT SPECIFICATIONS.pdf
The document defines a User Requirement Specification (URS) as the first document created to define procurement requirements for any equipment. It describes what information a URS should include, such as the purpose of the equipment, intended use, specifications. The document provides guidelines for creating a URS, including defining clear requirements, obtaining necessary approvals, and ensuring requirements are testable. It lists key sections that should be included in a URS, such as objective, scope, technical requirements, material specifications, safety features, and documentation requirements. Creating a thorough URS helps both users and suppliers understand requirements to design equipment that meets all needs.
EQUIPMENT QUALIFICATION.pptx
The document discusses the process of equipment qualification which includes design qualification (DQ), installation qualification (IQ), operational qualification (OQ), and performance qualification (PQ). DQ establishes that the equipment design meets predefined user requirements. IQ demonstrates that equipment has been properly installed. OQ shows that equipment can consistently operate within defined parameters. PQ shows that equipment can consistently meet performance standards under real-world conditions. The document provides details on the documentation and tests required for each qualification step.
EQUIPMENT QUALIFICATION.pptx
The document discusses the process of equipment qualification which includes design qualification (DQ), installation qualification (IQ), operational qualification (OQ), and performance qualification (PQ). DQ establishes that the equipment design meets predefined user requirements. IQ demonstrates that equipment has been properly installed. OQ shows that equipment can consistently operate within defined parameters. PQ shows that equipment can consistently meet performance standards under real-world conditions. The document provides details on the documentation and tests required for each qualification step.
Pharmaceutical Qualification & Validation
Qualification and Validation have big Weightage in the Regulatory Compliance and GMP. Qualification and Validation only can guarantee about the Product Safety, Integrity, Strength, Purity and Quality assurance.
Equipment qualification
This document provides an overview of equipment qualification terminology and processes. It discusses conducting a risk assessment to determine validation requirements and maintaining qualified equipment. The key points covered include defining user requirements, performing installation qualification to verify proper installation, and operational qualification to confirm the equipment operates as intended. Maintaining qualification involves ongoing change control and periodic review.
Capability initial flow control
The document provides information on the initial flow control commissioning process. It discusses preparation activities like forming a commissioning team, developing plans and procedures, and training personnel. It also describes pre-commissioning work such as checking installations, identifying issues, and beginning calibrations and testing. Subsequent stages covered are construction handover, pre-commissioning, dry commissioning, wet commissioning, and completing the process commissioning. The overall aim is to prove the plant operates as designed before client handover.
Jayadevan_Pattali
Jayadevan Pattali is an inspection engineer with over 10 years of experience in the oil and gas industry. He has worked for companies such as ADCO and SAMREF. Pattali has extensive experience in inspection planning, risk assessments, non-destructive testing, and corrosion monitoring. He is proficient in various inspection software and holds certifications including API 570 and API 510. Pattali is currently employed as an Inspection Engineer at ADCO in Abu Dhabi.
Saif Ali_original
Saif Ali has over 7 years of experience in oil and gas pipeline construction, inspection, commissioning, and maintenance. He has worked on major projects in Saudi Arabia and India. He is a certified welding inspector and pressure vessel inspector. His roles have included reviewing engineering documents, monitoring construction quality, non-destructive testing, and ensuring compliance with health, safety, and environmental standards. He aims to use his mechanical engineering background and inspection experience to continue contributing to the integrity and safety of oil and gas infrastructure projects.
validation and verification of medical device.pptx
M.Pharm Regulatory Affairs
2nd Sem
Subject: Regulatory Aspects of Medical devices.
Topic: Validation and Verification of Medical devices.
Qualification for validation
the various categories of qualifications necessary for Validating an equipment or instrument before & after installation. Those are
DQ(Design Qualification)
IQ(Installation Qualification)
OQ(Operation Qualification)
PQ(Performance Qualification)
Cleanroom Qualification
CleanRoom Qualification
1) Introduction
2) Qualification Approach
3) Qualification Stages
4) Performance Qualification
5) Summary
6) Reference
Pre commissioning Instrument Engineer
Pre Commissioning Testing Training and Maintenance of Instrumentation Analyzer, Metering Skid, Crude Oil Samplers, Corrosion, CP Radio Monitoring system, Laser HF and H2S Hydrogen, Oxygen Emerson oxymitter, Emerson Bentely Navada Vibration Analyzers, Thermography, Gas cement Petroleum Analyzers, Gas Chromatograph in Refinery Oil Gas Plants Petrochemical Aramco Sabic.
Extensive coordination between client and supplier in make sure all resolution successfully covered to achieve end client satisfaction.
E&I QC INSPECTOR RESUM AND documents.pdf
I have good working experience more then 17 years in Oil and Gas ,Fertilizer, Chemical, Petrochemical, in Saudi Arabia & Pakistan , Having a good Experience in Maintenance, Pre Commissioning ,& Commissioning, Start-up and erection Activities, Good knowledge & working skills in plant Control Automation and different control systems such as DCS & ESD systems, Burner Management System, Condition Monitoring System, Turbine & Compressor Integrated Control Systems, F&G System, Production Wellheads, Water & Gas Injection Wellheads Hydraulic Control Panels etc. Ability to work alone as a shifter and fault finding & rectify. i am a Safety conscious & sound knowledge about work permits like cold, hot and entry work permits.in Maintenance and Commissioning 4 LTE2.48 % C4G + During my job I'm Responsible for the PM , CM & breakdown maintenance of various field Instrumentation like flow , pressure , temperature level transmitters , vibration probes , control / on - off valves which installed on Process piping , Skids . Self motivated Maintenance Professional with a demonstrated history of working in the Oil & Gas and Petrochemicals industry in instrument & Control system department securing16 years of Practical experience I am expertly capable in fault diagnosis , troubleshooting and process controls systems in process plant to ensure safety guidelines . I am experienced in modern process control instrumentation in chemicals , petrochemical , fertilizer , oil & gas and cryogenic plants in field of instrumentation . Highly skilled in electrical operations & maintenance . Has working proficiency in SAP system utilization and MS office My skills include but are not limited to : PLC , DCS & Vibration Monitoring System | Control Valve Operation & Maintenance | Loop Checking & SAT / FAT Activities | P & ID & Instruments Calibration | Transducers , SIS / SIL Concept , Positioners | Single Loop Controllers , I / P , ESD System | Turbine & Compressor Control Systems | Workshop / Field Test Equipment | Control Valves , Online Gas Analyzers | Burner Management System | Custody Transfer Metering | Commissioning Activities | Interpersonal Skills | Presentation Skills
I am available on
Email: irfanpak181@gmail.com
Mobile 📱: 00966533012366
MAHANTESH-Resume -LSSGB,LSSBB
Mahantesh has over 11 years of experience in mechanical engineering. He is currently a Senior Engineer of Projects and Quality Assurance at B.Fouress Pvt Ltd, where he leads quality inspection and assurance activities. Previously he has worked at Weir Minerals and Bharat Heavy Electricals in quality and design roles. He is a Green Belt and Black Belt in Lean Six Sigma.
Terms defenations-abriviations
This document defines terms and acronyms related to quality assurance and control for Saudi Aramco engineering projects. It includes definitions for Saudi Aramco engineering procedures, standards, reports and requirements. It also defines quality management terms like quality assurance, quality control, inspection hold points, and roles such as quality manager and supplier. Acronyms are defined for inspection related documents and tests, as well as manufacturing and project terms.
Introduction to validation
This document provides an overview of calibration and qualification processes. It discusses:
1. The purpose and importance of calibrating instruments to ensure accuracy and traceability. Regular calibration helps minimize measurement drift.
2. The four phases of qualification for analytical instrumentation: design qualification verifies design suitability; installation qualification confirms proper installation; operational qualification verifies functionality; and performance qualification confirms ability to achieve expected results.
3. Key aspects of each qualification phase including documentation of design requirements, verification of installation per specifications, and confirmation of operational ability and performance. Qualification ensures measurement reliability.
Site Safety Management Guidelines.pptx
This document provides site safety management guidelines for the KL118 Project. It outlines various safety procedures and standards including:
- Daily construction cycles that include tool box meetings, safety inspections, and safety meetings.
- Construction equipment management procedures that require work plans, inspections, and approvals before equipment is brought on site.
- Safety inspection and audit standards covering various areas of work.
- Requirements for installing safety equipment according to standards.
- A three strike policy for safety violations where workers can be removed after three violations.
- Permit to work procedures for hazardous jobs that require permits and monitoring.
The guidelines emphasize communication, leadership, responsibility, and continuous improvement to achieve the
Inspection Engineer 1
This document provides a curriculum vitae for P. Karuppasamy, an inspection engineer with over 10 years of experience in quality assurance and quality control for various oil, gas, and industrial projects. It outlines his educational background in mechanical engineering, professional certifications, training courses completed, familiarity with relevant codes and standards, employment history with various companies in Saudi Arabia, and responsibilities in areas such as piping and welding inspection, equipment inspection, tank inspection, and coating inspection.
Calibration service
Calibration testing involves comparing instruments to standards to ensure conformity. Sigma Test & Research Centre is a growing calibration laboratory that provides calibration services for thermal, mechanical, electrical, and other instruments according to international standards. The laboratory facilitates calibration testing at its address in Delhi, India and can be contacted through Mr. Rahul Gupta.
SANJAY PATEL
Sanjay Patel has over 19 years of experience in instrumentation and project management. He has worked on instrumentation projects in India, Qatar, UAE, Bahrain, Oman, and Kuwait. His experience includes project planning, site management, commissioning, quality assurance, and ensuring projects are completed safely and on budget. He is proficient in installation, calibration, and maintenance of various instrumentation equipment and process control systems.
Similar to Executive summary.. (20)
validation and verification of medical device.pptx
validation and verification of medical device.pptx
Recently uploaded
Mastering B2B Payments Webinar from BlueSnap
B2B payments are rapidly changing. Find out the 5 key questions you need to be asking yourself to be sure you are mastering B2B payments today. Learn more at www.BlueSnap.com.
Part 2 Deep Dive: Navigating the 2024 Slowdown
Introduction
The global retail industry has weathered numerous storms, with the financial crisis of 2008 serving as a poignant reminder of the sector's resilience and adaptability. However, as we navigate the complex landscape of 2024, retailers face a unique set of challenges that demand innovative strategies and a fundamental shift in mindset. This white paper contrasts the impact of the 2008 recession on the retail sector with the current headwinds retailers are grappling with, while offering a comprehensive roadmap for success in this new paradigm.
Creative Web Design Company in Singapore
At Techbox Square, in Singapore, we're not just creative web designers and developers, we're the driving force behind your brand identity. Contact us today.
Industrial Tech SW: Category Renewal and Creation
Every industrial revolution has created a new set of categories and a new set of players.
Multiple new technologies have emerged, but Samsara and C3.ai are only two companies which have gone public so far.
Manufacturing startups constitute the largest pipeline share of unicorns and IPO candidates in the SF Bay Area, and software startups dominate in Germany.
Unveiling the Dynamic Personalities, Key Dates, and Horoscope Insights: Gemin...
Explore the fascinating world of the Gemini Zodiac Sign. Discover the unique personality traits, key dates, and horoscope insights of Gemini individuals. Learn how their sociable, communicative nature and boundless curiosity make them the dynamic explorers of the zodiac. Dive into the duality of the Gemini sign and understand their intellectual and adventurous spirit.
buy old yahoo accounts buy yahoo accounts
As a business owner, I understand the importance of having a strong online presence and leveraging various digital platforms to reach and engage with your target audience. One often overlooked yet highly valuable asset in this regard is the humble Yahoo account. While many may perceive Yahoo as a relic of the past, the truth is that these accounts still hold immense potential for businesses of all sizes.
Digital Transformation and IT Strategy Toolkit and Templates
This Digital Transformation and IT Strategy Toolkit was created by ex-McKinsey, Deloitte and BCG Management Consultants, after more than 5,000 hours of work. It is considered the world's best & most comprehensive Digital Transformation and IT Strategy Toolkit. It includes all the Frameworks, Best Practices & Templates required to successfully undertake the Digital Transformation of your organization and define a robust IT Strategy.
Editable Toolkit to help you reuse our content: 700 Powerpoint slides | 35 Excel sheets | 84 minutes of Video training
This PowerPoint presentation is only a small preview of our Toolkits. For more details, visit www.domontconsulting.com
LA HUG - Video Testimonials with Chynna Morgan - June 2024
Have you ever heard that user-generated content or video testimonials can take your brand to the next level? We will explore how you can effectively use video testimonials to leverage and boost your sales, content strategy, and increase your CRM data.🤯
We will dig deeper into:
1. How to capture video testimonials that convert from your audience 🎥
2. How to leverage your testimonials to boost your sales 💲
3. How you can capture more CRM data to understand your audience better through video testimonials. 📊
2024-6-01-IMPACTSilver-Corp-Presentation.pdf
IMPACT Silver is a pure silver zinc producer with over $260 million in revenue since 2008 and a large 100% owned 210km Mexico land package - 2024 catalysts includes new 14% grade zinc Plomosas mine and 20,000m of fully funded exploration drilling.
Evgen Osmak: Methods of key project parameters estimation: from the shaman-in...
Evgen Osmak: Methods of key project parameters estimation: from the shaman-inspired to the data-driven praxis (UA)
Kyiv PMDay 2024 Summer
Website – www.pmday.org
Youtube – https://www.youtube.com/startuplviv
FB – https://www.facebook.com/pmdayconference
Best practices for project execution and delivery
A select set of project management best practices to keep your project on-track, on-cost and aligned to scope. Many firms have don't have the necessary skills, diligence, methods and oversight of their projects; this leads to slippage, higher costs and longer timeframes. Often firms have a history of projects that simply failed to move the needle. These best practices will help your firm avoid these pitfalls but they require fortitude to apply.
Recruiting in the Digital Age: A Social Media Masterclass
In this masterclass, presented at the Global HR Summit on 5th June 2024, Luan Wise explored the essential features of social media platforms that support talent acquisition, including LinkedIn, Facebook, Instagram, X (formerly Twitter) and TikTok.
2022 Vintage Roman Numerals Men Rings
Discover timeless style with the 2022 Vintage Roman Numerals Men's Ring. Crafted from premium stainless steel, this 6mm wide ring embodies elegance and durability. Perfect as a gift, it seamlessly blends classic Roman numeral detailing with modern sophistication, making it an ideal accessory for any occasion.
https://rb.gy/usj1a2
The 10 Most Influential Leaders Guiding Corporate Evolution, 2024.pdf
In the recent edition, The 10 Most Influential Leaders Guiding Corporate Evolution, 2024, The Silicon Leaders magazine gladly features Dejan Štancer, President of the Global Chamber of Business Leaders (GCBL), along with other leaders.
Recently uploaded (20)
Unveiling the Dynamic Personalities, Key Dates, and Horoscope Insights: Gemin...
Unveiling the Dynamic Personalities, Key Dates, and Horoscope Insights: Gemin...
Digital Transformation and IT Strategy Toolkit and Templates
Digital Transformation and IT Strategy Toolkit and Templates
LA HUG - Video Testimonials with Chynna Morgan - June 2024
LA HUG - Video Testimonials with Chynna Morgan - June 2024
Evgen Osmak: Methods of key project parameters estimation: from the shaman-in...
Evgen Osmak: Methods of key project parameters estimation: from the shaman-in...
The Influence of Marketing Strategy and Market Competition on Business Perfor...
The Influence of Marketing Strategy and Market Competition on Business Perfor...
Recruiting in the Digital Age: A Social Media Masterclass
Recruiting in the Digital Age: A Social Media Masterclass
The 10 Most Influential Leaders Guiding Corporate Evolution, 2024.pdf
The 10 Most Influential Leaders Guiding Corporate Evolution, 2024.pdf
Executive summary..
- 1. Executive Summary Prior to delivery or final installation, clients want to ensure that their equipment or plant operates as intended and meets all the contractual requirements. For this reason it is necessary to conduct a Factory Acceptance Test to ensure high quality and integrity of the equipment /plant. Unfortunately, some vendors are not always properly prepared for a Factory Acceptance Test, and the testing procedure is sometimes rushed, in order to ship the equipment as soon as possible. A highly qualified, independent third party can support the vendor by performing a Factory Acceptance Test, or by witnessing its appropriate execution on behalf of the buyer. SGS Industrial Service offers Factory Acceptance Test to determine and document whether the equipment or plant operates as intended and meets all the contractual specifications. The Factory Acceptance Test provided by SGS is a customized testing procedure for equipment and plants. The test is executed before final installation or prior to delivery. Although testing is not a requirement, it is recommended carry it out. The Factory Acceptance Test by SGS includes a check of completeness, proof of functionality and a verification of all important documents, such as manuals, instructions, plans, drawings, piping and instrumentation diagrams (P&Ids) A comprehensive Factory Acceptance Test is the most cost-effective means to ensure that the equipment/plant operates correctly and is of high quality and integrity. The outcome of the Factory Acceptance Test gives the client confidence that the equipment/plant performs as expected under the full range of foreseeable conditions, including misuse and error.