Ladder rung covers are available in standard lengths and widths to fit over square or round ladder rungs. They are made of fiberglass composite material with embedded grit on the surface to provide traction. They are adhered to ladder rungs using adhesive and provide a safer standing surface than round rungs. The document provides specifications on available sizes, colors, grit grades, installation instructions, maintenance, slip resistance testing, and luminance data for glow-in-the-dark models.
Allura Flex decibel is a loose lay vinyl tile that provides acoustic performance of 19 dB while being lightweight and easy to handle, addressing common misconceptions about loose lay tiles. It uses an innovative dual reinforcement structure to achieve a loose lay effect without needing to be heavy. A tackifier can be used for installation instead of full-surface adhesive, allowing for faster installation and removal.
Dekro Paints is committed to using environmentally friendly coatings in their formulations. They conduct ongoing research to develop guidelines for safe application of their products and to limit their environmental impact. Dekro's research department investigates new raw materials from abroad to move away from toxic solvents towards water-based or high solids coatings.
Learn everything about car park protection at http://marispolymers.com/products/flooring-systems/waterproofing-car-parking-flooring-systems/
Maris polyurethane products offer great car park protection. Highly permanent elastic membranes with excellent mechanical,thermal and UV resistance properties.
A fully bonded waterproof coating based on polyurethane technology
Find out more about RIW Flexiseal typical uses and benefits here:
http://www.riw.co.uk/products/liquid-applied-systems/Flexiseal
The Royston Handy Cap 2 is a prefabricated corrosion protection device for cathodic protection connections on pipes, tanks, and other structures. It forms a thick, highly resistant electrical insulation seal over cable connections and welds. When applied, the plastic cap with elastomeric compound inside molds around irregular surfaces to completely cover connections. It provides corrosion protection in a simple and economical way.
3M Fire Barrier Moldable Putty+ is an intumescent fire-resistant putty that expands when exposed to heat. It is used to seal openings and maintain the fire rating of structures. The putty comes in stix, pads, and cable wraps and adheres to many surfaces. It has a four hour fire rating and expands to form an insulating char when heated, helping prevent the spread of fire and smoke. The document provides instructions on installing the putty in various applications such as sealing cables penetrating walls.
Ladder rung covers are available in standard lengths and widths to fit over square or round ladder rungs. They are made of fiberglass composite material with embedded grit on the surface to provide traction. They are adhered to ladder rungs using adhesive and provide a safer standing surface than round rungs. The document provides specifications on available sizes, colors, grit grades, installation instructions, maintenance, slip resistance testing, and luminance data for glow-in-the-dark models.
Allura Flex decibel is a loose lay vinyl tile that provides acoustic performance of 19 dB while being lightweight and easy to handle, addressing common misconceptions about loose lay tiles. It uses an innovative dual reinforcement structure to achieve a loose lay effect without needing to be heavy. A tackifier can be used for installation instead of full-surface adhesive, allowing for faster installation and removal.
Dekro Paints is committed to using environmentally friendly coatings in their formulations. They conduct ongoing research to develop guidelines for safe application of their products and to limit their environmental impact. Dekro's research department investigates new raw materials from abroad to move away from toxic solvents towards water-based or high solids coatings.
Learn everything about car park protection at http://marispolymers.com/products/flooring-systems/waterproofing-car-parking-flooring-systems/
Maris polyurethane products offer great car park protection. Highly permanent elastic membranes with excellent mechanical,thermal and UV resistance properties.
A fully bonded waterproof coating based on polyurethane technology
Find out more about RIW Flexiseal typical uses and benefits here:
http://www.riw.co.uk/products/liquid-applied-systems/Flexiseal
The Royston Handy Cap 2 is a prefabricated corrosion protection device for cathodic protection connections on pipes, tanks, and other structures. It forms a thick, highly resistant electrical insulation seal over cable connections and welds. When applied, the plastic cap with elastomeric compound inside molds around irregular surfaces to completely cover connections. It provides corrosion protection in a simple and economical way.
3M Fire Barrier Moldable Putty+ is an intumescent fire-resistant putty that expands when exposed to heat. It is used to seal openings and maintain the fire rating of structures. The putty comes in stix, pads, and cable wraps and adheres to many surfaces. It has a four hour fire rating and expands to form an insulating char when heated, helping prevent the spread of fire and smoke. The document provides instructions on installing the putty in various applications such as sealing cables penetrating walls.
The document summarizes the key steps in processing a denture: mixing, packing, curing, de-flasking, shaping, and polishing. The mixing step involves combining powder and liquid acrylic to form dough. Packing involves placing the dough in the flask mold. Curing involves polymerizing the acrylic through heating, either through a short or long heating cycle. De-flasking removes the cured denture from the mold. Shaping removes excess acrylic and polishing makes the denture smooth.
This document provides instructions for setting two front teeth - a central incisor and lateral incisor - during a dental procedure. The steps include using a pencil and wire to reinforce the pin dam, cutting wax sheets to size, trimming an artificial tooth to fit, and positioning the teeth at the proper angles while raising the lateral incisor off the occlusal plane by 1mm. Diagrams illustrate the positioning of the teeth.
Cement Australia render it™ multisurface greycementaustralia
Cement Australia grey cement based ‘Render It™ Multisurface’ is an easy to use Polymer Modified Render which only requires the addition of clean water and thorough mixing before application. This product incorporates additives that enable this one part render system to be easily applied in thicknesses ranging from 2mm to 10mm in a single application. Render It™ Multisurface Grey is also suitable for bagging bricks and blocks.
For more information visit: www.cementaustralia.com.au
The document discusses Tempo weatherseals, which are made of closed cell micro foam that provides advantages like preventing water absorption and ensuring an aesthetic look without waves. The weatherseals have a high tolerance and acoustic value. A cutting tool allows for high speed installation with pre-set blades for an accurate cut. The weatherseals are available in black, white, brown and grey and have a lifetime guarantee.
Circulate is a tufted textured loop pile carpet tile made from 100% polyamide with a pile height of 3.5mm. It has a total thickness of 7mm and meets the requirements for heavy commercial use. Circulate contains over 50% recycled content, meets indoor air quality standards, and is manufactured using 100% renewable electricity.
Are weatherability, printability, flexibility and adhesion to substrates must-haves for your application?
If you can no longer afford to use materials that exhibit outdoor wear and damage over time, then let us show you why you should consider a Flexible Acrylic Resin!
This document provides information on Sonolastic Ultra, a one-component, moisture-curing polyurethane joint sealant produced by BASF Construction Chemicals. It can be used for interior and exterior joints and demands extreme UV resistance. It is non-staining, flexible and pick resistant. Information is provided on product specifications, applications, installation instructions, packaging details, and safety precautions.
3M Fire Barrier CP 25WB+ caulk is a versatile firestop caulk that can seal a variety of pipe and cable penetrations through fire-rated structures. It is a one-part, water-based latex sealant that effectively contains fire and smoke. CP 25WB+ caulk has intumescent and endothermic properties and is paintable with a fast drying time of 10-15 minutes. It is available in tubes, sausages, and pails in various sizes to suit different job applications.
The document summarizes the steps taken to fabricate a new denture using the existing denture as a custom tray and bite registration. Key steps included: 1) taking an impression and pouring a master cast; 2) setting up the teeth and denture base on an articulator; 3) flasking, packing, and curing the acrylic; 4) deflasking, finishing, and polishing the new denture. The existing denture helped establish vertical dimension and bite registration to fabricate a replacement denture.
The document discusses various defects that can occur in adhesive coatings such as oozing, blistering, cratering, cracking, contamination, and peeling. It provides examples and descriptions for each defect type. Potential causes are outlined for many of the defects, including applying too soft an adhesive, exposure to moisture after coating, using low quality or old adhesive, applying the coating too rapidly, coating at too high a temperature, and electrostatic charges attracting dirt to the coated surface. Remedies are suggested for some defects, such as using a higher quality adhesive and allowing adequate drying time between coating and exposure to other conditions.
Ruisen ®hvic high voltageinsulatorcoatingjamie cai
the HVIC RTV hydrophobic silicone coating designed for preventing flash-over tracking and current leakage,which has good water repellency and anti-wheather properties.it can be coated on porcelain,ceramic ,glass insulator and instrument transformer bushing
The document discusses various primers and adhesives used for footwear manufacturing, including PU, PVC, TPR, EVA, and rubber primers as well as PU and SBS spray adhesives. It provides instructions for surface preparation and application of the different primers and adhesives. A hardener is also described that improves heat resistance when mixed with PU adhesive.
This document provides information on a glass manufacturing company including its facilities, machinery, processes, and specialized glass products. The company has large land plots and manufacturing facilities capable of automated cutting, arising, washing, grinding, fabrication, tempering, lamination, and insulation processes. It produces various types of coated, tinted, reflective, and low-e glass. Specialized glass divisions include products for facades, safety, curved tempering, ceramic fritting, glass creations, and more.
A record base or baseplate is a temporary form representing the base of a denture. It is used in recording maxillomandibular relations and in the arrangement of teeth. There are various materials that can be used to fabricate a baseplate including auto polymerizing resin, shellac, vacuum formed materials, wax and heat cure acrylic resin. The proper fabrication method must be selected based on the material. Common problems encountered include baseplates that are too thin, thick or flexible. The causes and solutions to issues are discussed.
The document discusses various finishing equipment and supplies, including:
1) Spraying equipment like the EagleSpray HVLP turbine spray system for applying coatings smoothly and efficiently.
2) The Lynx-3 HVLP conversion spray gun that can be used with standard compressed air lines to save on material costs.
3) Wood finishing products like Briwax cleaner and conditioner, Tibet Almond stick for scratches, and Penthouse furniture polish.
4) Epoxy fillers for holes, cracks, and other wood repairs like Quickwood and Repairitquik epoxy putty.
5) Cyanoacrylate glues like Zap/CA and
New Collision Repair Products and Procedureskenharrelson
The document provides information on various automotive finishing products from different companies. It describes abrasives, adhesives, paints, spray guns, sanding materials and other products. It aims to showcase new technologies and solutions that can improve efficiency and quality for automotive repair and refinishing shops. Specific products highlighted include the 3M Perfect-It denibbing system, Norton sandpaper and adhesives, SATA spray guns, and Abranet and Abralon sanding materials.
Carlisle's Sure-Seal Lap Sealant is a gun-consistency sealant used to seal the cut edges of EPDM membranes and elastoform flashing. It is durable and can expand and contract with roof membranes. It is applied using a caulk gun and seals EPDM edge splices. Each tube can seal 22 feet of splice in a 5/16 inch bead. It must be applied to clean and dry surfaces following Carlisle's installation instructions. Proper precautions include storing away from heat and using in a ventilated area due to flammability.
- Carlisle manufactures reinforced EPDM roof membranes in thicknesses of 45, 60, and 75 mils. The membranes are internally reinforced with polyester scrim to provide puncture and tear resistance.
- Key benefits of Carlisle's Sure-Tough reinforced EPDM membranes include excellent weathering resistance, seamless sheets that are UL classified, and industry-leading warranties of up to 30 years.
- Carlisle's Factory-Applied Tape seam technology results in reliable seams with greater strength through a quality-controlled application process in the factory.
1) The document provides instructions for applying Sinclair Coating to surfaces. It describes cleaning and preparing the surface, stirring the coating, and taping frames before application.
2) There are multiple application methods described including using a roller, spray gun, pressure pot, or airless system. Proper nozzle sizes and pressures are specified.
3) Two coats may be needed, waiting for the first to dry before the second. Coverage of 4 square meters per liter is estimated. Drying takes 45-60 minutes typically.
The document summarizes the key steps in processing a denture: mixing, packing, curing, de-flasking, shaping, and polishing. The mixing step involves combining powder and liquid acrylic to form dough. Packing involves placing the dough in the flask mold. Curing involves polymerizing the acrylic through heating, either through a short or long heating cycle. De-flasking removes the cured denture from the mold. Shaping removes excess acrylic and polishing makes the denture smooth.
This document provides instructions for setting two front teeth - a central incisor and lateral incisor - during a dental procedure. The steps include using a pencil and wire to reinforce the pin dam, cutting wax sheets to size, trimming an artificial tooth to fit, and positioning the teeth at the proper angles while raising the lateral incisor off the occlusal plane by 1mm. Diagrams illustrate the positioning of the teeth.
Cement Australia render it™ multisurface greycementaustralia
Cement Australia grey cement based ‘Render It™ Multisurface’ is an easy to use Polymer Modified Render which only requires the addition of clean water and thorough mixing before application. This product incorporates additives that enable this one part render system to be easily applied in thicknesses ranging from 2mm to 10mm in a single application. Render It™ Multisurface Grey is also suitable for bagging bricks and blocks.
For more information visit: www.cementaustralia.com.au
The document discusses Tempo weatherseals, which are made of closed cell micro foam that provides advantages like preventing water absorption and ensuring an aesthetic look without waves. The weatherseals have a high tolerance and acoustic value. A cutting tool allows for high speed installation with pre-set blades for an accurate cut. The weatherseals are available in black, white, brown and grey and have a lifetime guarantee.
Circulate is a tufted textured loop pile carpet tile made from 100% polyamide with a pile height of 3.5mm. It has a total thickness of 7mm and meets the requirements for heavy commercial use. Circulate contains over 50% recycled content, meets indoor air quality standards, and is manufactured using 100% renewable electricity.
Are weatherability, printability, flexibility and adhesion to substrates must-haves for your application?
If you can no longer afford to use materials that exhibit outdoor wear and damage over time, then let us show you why you should consider a Flexible Acrylic Resin!
This document provides information on Sonolastic Ultra, a one-component, moisture-curing polyurethane joint sealant produced by BASF Construction Chemicals. It can be used for interior and exterior joints and demands extreme UV resistance. It is non-staining, flexible and pick resistant. Information is provided on product specifications, applications, installation instructions, packaging details, and safety precautions.
3M Fire Barrier CP 25WB+ caulk is a versatile firestop caulk that can seal a variety of pipe and cable penetrations through fire-rated structures. It is a one-part, water-based latex sealant that effectively contains fire and smoke. CP 25WB+ caulk has intumescent and endothermic properties and is paintable with a fast drying time of 10-15 minutes. It is available in tubes, sausages, and pails in various sizes to suit different job applications.
The document summarizes the steps taken to fabricate a new denture using the existing denture as a custom tray and bite registration. Key steps included: 1) taking an impression and pouring a master cast; 2) setting up the teeth and denture base on an articulator; 3) flasking, packing, and curing the acrylic; 4) deflasking, finishing, and polishing the new denture. The existing denture helped establish vertical dimension and bite registration to fabricate a replacement denture.
The document discusses various defects that can occur in adhesive coatings such as oozing, blistering, cratering, cracking, contamination, and peeling. It provides examples and descriptions for each defect type. Potential causes are outlined for many of the defects, including applying too soft an adhesive, exposure to moisture after coating, using low quality or old adhesive, applying the coating too rapidly, coating at too high a temperature, and electrostatic charges attracting dirt to the coated surface. Remedies are suggested for some defects, such as using a higher quality adhesive and allowing adequate drying time between coating and exposure to other conditions.
Ruisen ®hvic high voltageinsulatorcoatingjamie cai
the HVIC RTV hydrophobic silicone coating designed for preventing flash-over tracking and current leakage,which has good water repellency and anti-wheather properties.it can be coated on porcelain,ceramic ,glass insulator and instrument transformer bushing
The document discusses various primers and adhesives used for footwear manufacturing, including PU, PVC, TPR, EVA, and rubber primers as well as PU and SBS spray adhesives. It provides instructions for surface preparation and application of the different primers and adhesives. A hardener is also described that improves heat resistance when mixed with PU adhesive.
This document provides information on a glass manufacturing company including its facilities, machinery, processes, and specialized glass products. The company has large land plots and manufacturing facilities capable of automated cutting, arising, washing, grinding, fabrication, tempering, lamination, and insulation processes. It produces various types of coated, tinted, reflective, and low-e glass. Specialized glass divisions include products for facades, safety, curved tempering, ceramic fritting, glass creations, and more.
A record base or baseplate is a temporary form representing the base of a denture. It is used in recording maxillomandibular relations and in the arrangement of teeth. There are various materials that can be used to fabricate a baseplate including auto polymerizing resin, shellac, vacuum formed materials, wax and heat cure acrylic resin. The proper fabrication method must be selected based on the material. Common problems encountered include baseplates that are too thin, thick or flexible. The causes and solutions to issues are discussed.
The document discusses various finishing equipment and supplies, including:
1) Spraying equipment like the EagleSpray HVLP turbine spray system for applying coatings smoothly and efficiently.
2) The Lynx-3 HVLP conversion spray gun that can be used with standard compressed air lines to save on material costs.
3) Wood finishing products like Briwax cleaner and conditioner, Tibet Almond stick for scratches, and Penthouse furniture polish.
4) Epoxy fillers for holes, cracks, and other wood repairs like Quickwood and Repairitquik epoxy putty.
5) Cyanoacrylate glues like Zap/CA and
New Collision Repair Products and Procedureskenharrelson
The document provides information on various automotive finishing products from different companies. It describes abrasives, adhesives, paints, spray guns, sanding materials and other products. It aims to showcase new technologies and solutions that can improve efficiency and quality for automotive repair and refinishing shops. Specific products highlighted include the 3M Perfect-It denibbing system, Norton sandpaper and adhesives, SATA spray guns, and Abranet and Abralon sanding materials.
Carlisle's Sure-Seal Lap Sealant is a gun-consistency sealant used to seal the cut edges of EPDM membranes and elastoform flashing. It is durable and can expand and contract with roof membranes. It is applied using a caulk gun and seals EPDM edge splices. Each tube can seal 22 feet of splice in a 5/16 inch bead. It must be applied to clean and dry surfaces following Carlisle's installation instructions. Proper precautions include storing away from heat and using in a ventilated area due to flammability.
- Carlisle manufactures reinforced EPDM roof membranes in thicknesses of 45, 60, and 75 mils. The membranes are internally reinforced with polyester scrim to provide puncture and tear resistance.
- Key benefits of Carlisle's Sure-Tough reinforced EPDM membranes include excellent weathering resistance, seamless sheets that are UL classified, and industry-leading warranties of up to 30 years.
- Carlisle's Factory-Applied Tape seam technology results in reliable seams with greater strength through a quality-controlled application process in the factory.
1) The document provides instructions for applying Sinclair Coating to surfaces. It describes cleaning and preparing the surface, stirring the coating, and taping frames before application.
2) There are multiple application methods described including using a roller, spray gun, pressure pot, or airless system. Proper nozzle sizes and pressures are specified.
3) Two coats may be needed, waiting for the first to dry before the second. Coverage of 4 square meters per liter is estimated. Drying takes 45-60 minutes typically.
Industrial walkway covers are available in various standard sizes and colors. They are made of fiberglass reinforced plastic (FRP) and embedded with fused alumina grit for traction. Different grit sizes are available for various industrial applications. Walkway covers can be cut on site and installed using screws, bolts, or mastic on surfaces like steel, wood, concrete, or grating. They are durable, chemical resistant, and meet international slip resistance standards.
This document provides product data for SilverShield 5000X, a two-part epoxy coating with zinc flakes. It can be used indoors or outdoors to protect surfaces like pipes, tanks, and structural steel from corrosion. The coating has excellent adhesion and flexibility, provides a metallic silver finish, and protects in temperatures from -18 to 121 degrees Celsius. It is a 100% solids coating that is easy to apply by spray, brush, or roller in thicknesses between 4-12 mils.
This document provides information about various braided compression packing and gasket materials. It describes the properties and applications of materials like compressed non-asbestos sheets, ASP brands, carbon and NBR materials, and a new nitrosamine-free GLD material. Maximum temperatures, pressures, densities and other specifications are provided for material selection.
The document describes Raino Shield, a water-based elastomeric coating that provides thermal reflective and insulative properties. It reduces heat loading in buildings by up to 40% and lowers roof temperatures by 10-25°C depending on the material. The coating has high reflectivity, UV resistance, and durability. It is suited for concrete roofs, terraces, and other structures. Application instructions and specifications are provided.
Vizyon İnovatif Yalıtım Ltd.Şti günümüz yalıtım ihtiyaçlarına inovatif çözümler sunmak amacı ile 2015 de kurulmuştur. Termal yalıtım, gürültü ve titreşim sönümleme, yüksek ısı ve kriyojenik yalıtım ve yangın yalıtımı alanında, en ileri teknoloji ürün, hizmet ve dizayn alanında hizmet vermektedir.
The document provides application instructions for Denso 80 Epoxy Heat Shrink Sleeve, a coating system for corrosion protection of field joints on pipelines operating at temperatures up to 80°C. The instructions describe 15 steps for surface preparation including beveling, cleaning, heating and abrasive blasting the joint area, applying a Denso epoxy primer, positioning and wrapping the heat shrink sleeve, shrinking and rolling the sleeve, and inspecting the final installation. Safety equipment and storage instructions are also provided.
This document provides information about Reznoclad, a type of high pressure laminate panel suitable for exterior cladding and facades. It describes the manufacturing process, grades available, characteristics like UV and weather resistance, common applications, installation and fixing methods. Technical specifications are also listed, showing fire resistance classifications and passing various tests for properties like dimensional stability and resistance to impacts, wet conditions, and weathering. Colors and patterns available are displayed along with example projects using Reznoclad panels.
This product data sheet provides information on DX-5400, a high temperature resistant novolac epoxy coating and sealant. It is a 100% solids, solvent-free coating that offers chemical resistance to acids, caustics, and petroleum products. It can withstand continuous temperatures up to 450°F and intermittent temperatures up to 500°F. The product has a glossy finish, requires minimal surface preparation, and offers quick return to service within 24 hours at 77°F.
http://marispolymers.com/products/waterproofing-systems/inverted-flat-roof-waterproofing/
Inverted flat roof waterproofing combined with a thermal insulation is essential for a buildings waterproofing and energy saving thermal insulation. The MARISEAL SYSTEM® inverted flat roof waterproofing method offers a simple build-up waterproofing, that features a protected waterproofing membrane and loose laying insulation boards.
The inverted waterproofing insulation system is applicable for all types of flat roofs, as it offers an efficient solution for new construction but also for renovation of old flat roofs as is it possible to install an inverted roof over an existing roof build up.
This document provides information on Kl bertop TP 41 N A-B, a two-component bonded coating for metal components. It has benefits such as a long component life expectancy from -40 to 230°C due to its flexible bonded coating of up to 70 μm thickness. It reduces friction and wear on metal and plastic pairings and provides lifetime lubrication and high resistance to wear. The document describes the product's composition, applications, instructions for mixing the two components, application process, and drying and hardening times.
Plastifloor CF 1/8" SL is a methyl-methacrylate based, self-leveling flooring system with decorative flake broadcast. It fully cures in one hour, reducing downtime, and provides a seamless, impervious floor that is easy to clean and maintain. The system offers excellent chemical resistance and UV resistance for long-term color performance in applications such as grocery stores, hospitals, restaurants, and factories. It requires no waxing or stripping for maintenance.
Zyvax is a company that started in 1960 and specializes in semi-permanent mold release products. Their products can be used with various resin and tool substrate combinations at temperatures up to 500°F. Their mold release system helps provide consistent molding results and reduces tool maintenance costs. Zyvax is committed to providing high quality products and services according to their quality management system.
This document summarizes the properties and application of ELASTASEAL, a flexible epoxy coating designed for applications requiring high elongation. ELASTASEAL can tolerate expansion and contraction, adjusts to freeze-thaw cycles, and provides corrosion protection for surfaces like cooling towers, expansion joints, and concrete. It is a 100% solids, solvent-free coating that offers excellent adhesion and flexibility with elongation up to 300%. ELASTASEAL can be applied to surfaces like metal, concrete, wood, and geotextiles, and is suitable for uses like tank linings, secondary containment, and crack repair.
Rhino shrink wrap specialise in the supply of scaffold shrink wrap materials and equipment. We also have our own teams who install shrink wrap sheeting to provide robust weather protection and containment of dust and debris to construction and refurbishment projects.
For the industry standard in Air intake Protection always ask for genuine RABΞScreens
RABΞScreens SAVE YOU MONEY
If you have air movement you have an application for a RABΞScreen air intake filter
RABΞScreen Protection stops debris before it costs you time, energy & money
Similar to EPDM Pressure-Sensitive Cured Cover Strip (20)
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
How to Fix the Import Error in the Odoo 17Celine George
An import error occurs when a program fails to import a module or library, disrupting its execution. In languages like Python, this issue arises when the specified module cannot be found or accessed, hindering the program's functionality. Resolving import errors is crucial for maintaining smooth software operation and uninterrupted development processes.
How to Manage Your Lost Opportunities in Odoo 17 CRMCeline George
Odoo 17 CRM allows us to track why we lose sales opportunities with "Lost Reasons." This helps analyze our sales process and identify areas for improvement. Here's how to configure lost reasons in Odoo 17 CRM
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
How to Add Chatter in the odoo 17 ERP ModuleCeline George
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
How to Setup Warehouse & Location in Odoo 17 InventoryCeline George
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
How to Make a Field Mandatory in Odoo 17Celine George
In Odoo, making a field required can be done through both Python code and XML views. When you set the required attribute to True in Python code, it makes the field required across all views where it's used. Conversely, when you set the required attribute in XML views, it makes the field required only in the context of that particular view.
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
EPDM Pressure-Sensitive Cured Cover Strip
1. 800-479-6832 | P.O. Box 7000 | Carlisle, PA 17013 | Fax: 717-245-7053 | www.carlislesyntec.com
E X P E R I E N C E T H E C A R L I S L E D I F F E R E N C E
Pressure-Sensitive Cured Cover Strip
Overview
Sure-Seal EPDM Pressure-Sensitive (PS) Cured Cover Strip is a nominal
60-mil-thick, cured EPDM membrane with a nominal 28-mil-thick, fully
cured, synthetic rubber pressure-sensitive adhesive.
PS Cured Cover Strip is ideal for stripping in seams and metal edgings,
sealing end laps of FleeceBACK®
systems or simply making repairs to cut
membrane. PS Cured Cover Strip must be used in conjunction with Carlisle
HP-250 or Low-VOC Primer.
Features and Benefits
» Available in 6" x 100', 9" x 100' and 12" x 50' rolls
» As tough as the field membrane
» Fully cured state enables it to handle expansion and contraction loads
without weakening
» Resists tearing, flex cracking and abrasion caused by temperature
extremes, sunlight, precipitation and all forms of normal weathering
Installation
1. The entire surface where the PS Cured Cover Strip will be applied
must be clean. The adhesive on the back of the PS Cured Cover
Strip will not adhere to dusted or dirty surfaces. Any residual
contamination will be detrimental to the bond strength of the
adhesive.
2. Remove all foreign material.
a. Remove excess mica dust by brooming or wiping with a clean,
dry rag or Carlisle HP Splice Wipe.
b. The use of Weathered Membrane Cleaner may be necessary.
This process is essential on membrane that has been exposed
for a number of weeks.
Note: Permeation-resistant gloves (that meet ANSI/ISEA 105-
2005) are required for hand protection when cleaners or primers
are being used.
c. Allow the membrane to dry thoroughly before proceeding.
3. Application of HP-250 or Low-VOC Primer
a. Standard Membrane - Apply the primer with a clean HP Splice
Wipe (or equivalent). Scrub the area of the membrane (where
the PS Cured Cover Strip is to be applied) in a circular motion
to achieve a thin, even coating on the membrane. The properly
cleaned/primed area will be uniform in color without streaks
and free of globs or puddles.
b. Pre-Kleened™
Membrane - Roller-apply the primer to the
membrane with a short nap-length paint roller. The coated area
will be free of globs or puddles.
Note: The use of excessive amounts of primer will not significantly
enhance the adhesion of the pressure-sensitive product to the
EPDM membrane. Use only the amount necessary to obtain 100%
coverage of the area where the PS Cured Cover Strip will be applied.
4. Allow the primer to flash-off until it does not transfer to a dry finger
touch yet remains tacky. Install the pressure-sensitive product
immediately after the primer has flashed-off to promote adhesion
and avoid contamination.
5. Peel off 10–12" (250–305 mm) of the protective release liner
from the PS Cured Cover Strip. Position the cured cover strip over
the area to be covered and press down the exposed tape adhesive
using firm, even hand pressure across the entire area. Continue this
process until the full area to be flashed is completed.
6. Immediately roll the PS Cured Cover Strip with a 2"-wide (50 mm)
hand roller. Roll across the cover strip edge, not parallel to it.
7. Apply Lap Sealant at overlaps in PS Cured Cover Strip and at joints
in the metal edging according to the appropriate detail.
8. To achieve proper adhesion of the PS Cured Cover Strip when jobsite
temperatures fall below 40°F (4°C), heat the primed area of the
membrane with a hot-air gun as the flashing is applied and pressed
into place.
Review Carlisle specifications and details for complete installation
information.