EnCata - Engineering catalyst
•
0 likes•50 views
This company provides product development services including software, hardware, mechanical systems, and electronics engineering. They work across many industries from aerospace to consumer products. Their services include design, prototyping, testing, and manufacturing. They have capabilities in mechanical CAD, mechatronics, control systems engineering, and more. Their goal is to efficiently solve complex problems requiring both electronics and mechanical expertise.
Report
Share
Report
Share
Download to read offline
Recommended
Sli110725 Sunrise Presentation Short Preso V004
Sunrise Labs is a product development company that has been in business since 1992, employs 30 people, and specializes in medical and industrial devices. It offers comprehensive design and development services including concept design, manufacturing, and regulatory approval assistance. Sunrise Labs follows a systematic development process with a focus on quality, meeting deadlines, and exceeding client expectations.
Leschak Resume
Doug Leschak is a highly experienced Product Safety Engineer with over 30 years of experience in product safety testing, compliance, and regulatory approvals. He has worked for several large technology companies including IBM, Sun Microsystems, Motorola, and Digital Equipment Corporation, where he established safety departments, constructed safety testing laboratories, trained engineers, and obtained worldwide safety certifications and approvals for a variety of product lines. Leschak is proficient in international safety standards and has extensive experience developing test procedures, performing design reviews, and providing safety requirements.
Leschak Resume
Doug Leschak is a highly experienced Product Safety Engineer with over 30 years of experience in product safety testing, compliance, and regulatory approvals. He has worked for several large technology companies including IBM, Sun Microsystems, Motorola, and Digital Equipment Corporation, where he established safety departments, constructed safety testing laboratories, trained engineers, and obtained worldwide safety certifications and approvals for a variety of product lines. Leschak is proficient in international safety standards and has extensive experience developing test procedures, performing design reviews, and providing safety requirements.
Leschak Resume
Doug Leschak is a highly experienced Product Safety Engineer with over 30 years of experience in product safety testing, compliance, and regulatory approvals. He has worked for several large technology companies including IBM, Sun Microsystems, Motorola, and Digital Equipment Corporation, where he established safety departments, constructed safety testing laboratories, trained engineers, and obtained worldwide safety certifications and approvals for a variety of product lines. Leschak is proficient in international safety standards and has extensive experience developing test procedures, performing design reviews, and providing safety requirements.
MANUFACTURING
The document summarizes the abilities, skills, and experience of an engineering technician. It lists areas of engineering support including prototype assembly, testing, and documentation. It also outlines skills in reading blueprints, using procedures and software like AutoCAD, lab equipment like oscilloscopes, and safety practices. The technician has over 25 years of experience in areas such as quality assurance, engineering support, prototyping, electronics testing, and equipment operation, including high voltage equipment and lasers.
Electrical Engineer (David Modin)
David Modin is seeking an electrical engineering position in Orange County and has over 20 years of experience in medical device testing. He has expert proficiency in electrical network analysis, mixed signal testing, and various engineering software. His professional experience includes positions at Cardiac Science, Medtronic Diabetes, Cameron Health, and Medtronic where he developed automated test systems and improved product yields. He has a Bachelor's degree in electrical engineering from Arizona State University.
jayesh_resume
- Jayesh Kumar Sharma is currently working as a Consultant in IP & Testchip Design at Cadence Design Systems since July 2015. He previously worked as a Physical Design Trainee at Orange Semiconductor Private Limited from November 2014 to June 2015.
- He has comprehensive knowledge and experience in physical design implementation, strategies, and static timing analysis. He is proficient with EDA tools like Cadence Virtuoso, Encounter, and languages like Verilog and Perl/TCL.
- Some of his projects include completing the physical design of blocks at 45nm technology with gate counts of 90K and 245K, writing scripts for PNR flows, and fixing timing, DRCs, LVS,
Current_Resume
Jacob Batts is an electrical engineer seeking a full-time position focused on design, integration, troubleshooting, and support. He has a Bachelor's degree in Electrical Engineering Technology from Purdue University and experience in software, hardware, design, testing, and validation. His current role involves analyzing schematics, troubleshooting hardware and software issues, developing test plans, and directly supporting customers at Caterpillar. Previously, he designed circuit layouts and verified electrical systems as a Hardware Verification Engineer at Delphi.
Recommended
Sli110725 Sunrise Presentation Short Preso V004
Sunrise Labs is a product development company that has been in business since 1992, employs 30 people, and specializes in medical and industrial devices. It offers comprehensive design and development services including concept design, manufacturing, and regulatory approval assistance. Sunrise Labs follows a systematic development process with a focus on quality, meeting deadlines, and exceeding client expectations.
Leschak Resume
Doug Leschak is a highly experienced Product Safety Engineer with over 30 years of experience in product safety testing, compliance, and regulatory approvals. He has worked for several large technology companies including IBM, Sun Microsystems, Motorola, and Digital Equipment Corporation, where he established safety departments, constructed safety testing laboratories, trained engineers, and obtained worldwide safety certifications and approvals for a variety of product lines. Leschak is proficient in international safety standards and has extensive experience developing test procedures, performing design reviews, and providing safety requirements.
Leschak Resume
Doug Leschak is a highly experienced Product Safety Engineer with over 30 years of experience in product safety testing, compliance, and regulatory approvals. He has worked for several large technology companies including IBM, Sun Microsystems, Motorola, and Digital Equipment Corporation, where he established safety departments, constructed safety testing laboratories, trained engineers, and obtained worldwide safety certifications and approvals for a variety of product lines. Leschak is proficient in international safety standards and has extensive experience developing test procedures, performing design reviews, and providing safety requirements.
Leschak Resume
Doug Leschak is a highly experienced Product Safety Engineer with over 30 years of experience in product safety testing, compliance, and regulatory approvals. He has worked for several large technology companies including IBM, Sun Microsystems, Motorola, and Digital Equipment Corporation, where he established safety departments, constructed safety testing laboratories, trained engineers, and obtained worldwide safety certifications and approvals for a variety of product lines. Leschak is proficient in international safety standards and has extensive experience developing test procedures, performing design reviews, and providing safety requirements.
MANUFACTURING
The document summarizes the abilities, skills, and experience of an engineering technician. It lists areas of engineering support including prototype assembly, testing, and documentation. It also outlines skills in reading blueprints, using procedures and software like AutoCAD, lab equipment like oscilloscopes, and safety practices. The technician has over 25 years of experience in areas such as quality assurance, engineering support, prototyping, electronics testing, and equipment operation, including high voltage equipment and lasers.
Electrical Engineer (David Modin)
David Modin is seeking an electrical engineering position in Orange County and has over 20 years of experience in medical device testing. He has expert proficiency in electrical network analysis, mixed signal testing, and various engineering software. His professional experience includes positions at Cardiac Science, Medtronic Diabetes, Cameron Health, and Medtronic where he developed automated test systems and improved product yields. He has a Bachelor's degree in electrical engineering from Arizona State University.
jayesh_resume
- Jayesh Kumar Sharma is currently working as a Consultant in IP & Testchip Design at Cadence Design Systems since July 2015. He previously worked as a Physical Design Trainee at Orange Semiconductor Private Limited from November 2014 to June 2015.
- He has comprehensive knowledge and experience in physical design implementation, strategies, and static timing analysis. He is proficient with EDA tools like Cadence Virtuoso, Encounter, and languages like Verilog and Perl/TCL.
- Some of his projects include completing the physical design of blocks at 45nm technology with gate counts of 90K and 245K, writing scripts for PNR flows, and fixing timing, DRCs, LVS,
Current_Resume
Jacob Batts is an electrical engineer seeking a full-time position focused on design, integration, troubleshooting, and support. He has a Bachelor's degree in Electrical Engineering Technology from Purdue University and experience in software, hardware, design, testing, and validation. His current role involves analyzing schematics, troubleshooting hardware and software issues, developing test plans, and directly supporting customers at Caterpillar. Previously, he designed circuit layouts and verified electrical systems as a Hardware Verification Engineer at Delphi.
Skandsoft Setu EPC Certifification
Skandsoft Technologies Pvt Ltd has been awarded the EPCglobal Software Certification Mark for its RFID middleware platform SETU. The certification mark ensures EPC/RFID software products have been tested to work predictably with Gen2 RFID tags according to EPCglobal standards. SETU underwent rigorous third-party testing and is among a select few globally certified software for RFID standards compliance. The EPCglobal Software Certification Program provides authoritative compliance testing and information for EPC/RFID software vendors and products.
Waseem Arfi Personal Profile
- The document is a personal profile for a senior IT professional with over 10 years of experience in software development, team management, and client relations.
- He has expertise in various Microsoft technologies and has led teams in developing several software applications and tools.
- His experience includes roles managing software development projects and client accounts at various companies, where he delivered projects on time and won new clients.
Extended QA testing to enhance productivity of a leading networking solution ...
This case study showcase show Veryx Technologies enabled a global industrial ethernet solution provider to meet their targets by providing extended QA testing
Pool_Dan_Resume
Dan Pool seeks a position as a consulting engineer. He has a B.S. in Renewable Energy Engineering and experience designing, building, and testing renewable energy prototypes. He is detail-oriented, able to problem solve independently, and has strong communication skills. His previous roles include designing a portable biomass gasifier unit and performing electrical load analysis for emergency power systems.
Gunasekhar Karnatham_Profile_Continental
This document provides a summary of Gunasekhar Karnatham's background and experience. He has over 9 years of experience in automotive systems engineering, hardware engineering, and component engineering. Currently, he works as a senior systems engineer at Continental Automotive, where he manages stakeholder requirements and system testing for GM's memory seat module ECU development. Previously he has worked on airbag electronic control units, body control modules, telematics systems, and medical equipment. He is proficient in systems requirements engineering, hardware design, testing, and automotive communication protocols like CAN and LIN.
Final Resume
The document is a resume for Adulis Y. Abun, an electrical engineer with over 2 years of experience in power systems and power electronics. He has a Master's degree in Electric Power Engineering from Chalmers University of Technology in Sweden and is seeking opportunities in power system studies, protection, and design. His experience includes projects in power network design, power electronic design, and electrical installation and maintenance. He is currently working as a Manufacturing Engineer at Fresenius Medical Care.
Gabriel_Salguero
Gabriel Salguero is a senior electronics technician with over 17 years of experience in the aerospace and electric vehicle industries. He has skills in troubleshooting, interpreting technical drawings, and managing multiple tasks. Salguero currently works as a validation technician at Faraday Future, where he performs testing on powertrains and builds test equipment.
Scott Picco Resume - current
Scott Picco is seeking an engineering management or senior engineering position involving renewable energy products. He has over 15 years of experience in electrical engineering, project management, and product certification for renewable energy equipment. This includes extensive knowledge of relevant standards and managing large certification projects up to 1 year in length for clients in the US, Europe, and Asia.
TANGO Project Poster v2
The TANGO project involves Atos, Bull, Deltatec, the University of Leeds, CETIC, and the Barcelona Supercomputing Center working to simplify how developers approach next-generation applications and heterogeneous hardware including clusters, chips, and programmable logic devices. The project aims to optimize energy and performance, enable fast prototyping through software emulation and hardware-in-the-loop, monitor underlying infrastructures, define self-adaptation behaviors at runtime, and specify critical and non-critical quality behaviors for applications.
Rameez cv1
Rameez A.R has over 8 years of experience in the oil and gas industry as an electrical engineer and currently holds the role of Quality Control Supervisor at Baker Hughes in Dubai, UAE. He has a background in project management, quality control, and electrical systems. Previously he held roles as an AMO Process Engineer and Maintenance Engineer at Baker Hughes where he implemented LEAN processes and developed diagnostic systems. He is seeking a stable position where he can provide support critical to organizational success.
Using formal methods in Industrial Software Development
The document discusses the use of formal methods in software development. It provides an overview of I-Mathic, a formal method developed by Imtech that uses sequence enumeration and CSP (Communicating Sequential Processes). The document describes examples of applying I-Mathic on industrial projects, finding defects and showing high productivity. Benefits include consistent requirements and few defects, while drawbacks include limited tool integration and requiring abstract thinking. I-Mathic is currently mandated for in-house projects and continues to be developed with universities.
resume_copy1
Ajay Sharma has over 10 months of experience in VLSI design and development. He has a M.Tech in VLSI Systems from Shiv Nadar University with a CGPI of 8.9. He has knowledge in areas like digital design, RTL verification, mixed signal design, and low power RTL design characterization. He has worked at Synopsys since March 2015 as a contractor, where he led activities related to low power verification of RTL designs. He is proficient with tools like VCS, Verdi, Cadence, and Modelsim.
Topics in Networking for project and thesis
Find out the latest topics in computer networking for your project and thesis.
Techsparks, 2nd floor, D-185, Phase 8B, Industrial Area, Sahibzada Ajit Singh Nagar, Mohali, Punjab 160055
+91- 9465330425
techsparks2013@gmail.com
The Use of Formal Methods on the iFACTS Air Traffic Control Project
The next talk in our series from the recent Open-DO Conference is from Neil White,Principal Engineer with Altran Praxis. His talk provides an overview of the formal methods used on the iFACTS project. iFACTS is delivering increased Air Traffic Control capability to the UK.
360logica At A Glance
360logica is a third party software testing company with over 12 years of experience. It has 150+ employees with an average experience of 5+ years. 360logica provides a full range of testing services including unit, integration, functional, regression, performance, and security testing. It has expertise in test automation using both open source and licensed tools. Some of 360logica's customers include major companies in retail, mobile, e-commerce, and software consulting.
GLENN ALLISON_Software_Tester
This document contains Glenn Allison's resume. It lists his contact information, education, skills, and professional experience. Glenn has a Bachelor's of Science in Information Technology from the University of Phoenix. His experience includes roles as a QA Test Engineer, Asset Management, PC Technician, and Custodian. He has skills in software testing, troubleshooting, Microsoft applications, and technical support.
Resume
Jari Rantamarkkula is a test/design engineer with 25 years of experience at ABB Medium Voltage Products type test laboratory. He has worked testing electronic components and protection relays, including the SPACOM and RELION series. Rantamarkkula has professional experience in type testing, EMC testing, environmental testing, and mechanical testing. He also has experience working in Saudi Arabia, South Korea, United Arab Emirates, and several European territories.
8 Tips To Write A Quality Code
What is a Quality Code?
A high-quality code is a code that is easy to understand and has the least bugs. It performs what is expected of it and follows the level of the language it is written in. Now that you know what I am talking about let's see how we can write quality code.
Etrance Networks Introduction
Etrance Networks offers technology consulting and engineering services in Embedded, Networking, Telecom and Security Products. We have expertise in design and development of communication products like Routers, LTE Packet-Gateway and Signaling, Deep Packet inspection, BRAS, Video CDN, Deep Packet Inspection, HTTP/SSL Load-Balancing and Offload Appliance. Etrance was founded by a team with broad experience with MNCs like Cisco, HP, Motorola and technology startups like Movik, Sonoa.
We have four offerings for our clients:
* Talent Development - Training with mini-projects, customized workshops
* Consulting - Product Ideation, architecture, evaluation, prototyping and System Engineering
* Services - Design and Development of Control-Plane, Forwarding-chipset, Management and Platform features
* Product Engineering - Turnkey model for engineering deliverable that includes architecture, development, QA, documentation.
Freelance Robotics Company ProfileV1_4
Freelance Robotics was created in 2009 to provide research and development services to industry, small businesses, and universities. They develop solutions to problems to bridge research and commercialization. Their services include robotics, electronics, IT, mechanics, physics, artificial intelligence, and control systems engineering. They help improve productivity with robotics solutions, develop new products, and improve existing systems. They also offer consultancy services for in-house projects.
Deep learning enhanced digital twin for Closed-loop In-Process Quality Improv...
Deep learning enhanced digital twin for Closed-loop In-Process Quality Improv...WMG centre High Value Manufacturing Catapult
The document outlines an agenda for a workshop on digital twin technology from a manufacturing quality perspective. The workshop will discuss using CAE simulation and artificial intelligence to create digital twins for closed-loop in-process quality improvement. Speakers will discuss applications in automotive and aerospace manufacturing and how digital twin technology can shorten lead times and ramp-up times by improving quality.Pivot International Introduction
Pivot is an engineering and manufacturing company established in 1994 that specializes in new product development and contract manufacturing. It has operations in Kansas, Taiwan, China, and the Philippines. Pivot offers services including industrial design, mechanical engineering, manufacturing, and quality management to effectively improve customers' efficiency and bottom line.
More Related Content
What's hot
Skandsoft Setu EPC Certifification
Skandsoft Technologies Pvt Ltd has been awarded the EPCglobal Software Certification Mark for its RFID middleware platform SETU. The certification mark ensures EPC/RFID software products have been tested to work predictably with Gen2 RFID tags according to EPCglobal standards. SETU underwent rigorous third-party testing and is among a select few globally certified software for RFID standards compliance. The EPCglobal Software Certification Program provides authoritative compliance testing and information for EPC/RFID software vendors and products.
Waseem Arfi Personal Profile
- The document is a personal profile for a senior IT professional with over 10 years of experience in software development, team management, and client relations.
- He has expertise in various Microsoft technologies and has led teams in developing several software applications and tools.
- His experience includes roles managing software development projects and client accounts at various companies, where he delivered projects on time and won new clients.
Extended QA testing to enhance productivity of a leading networking solution ...
This case study showcase show Veryx Technologies enabled a global industrial ethernet solution provider to meet their targets by providing extended QA testing
Pool_Dan_Resume
Dan Pool seeks a position as a consulting engineer. He has a B.S. in Renewable Energy Engineering and experience designing, building, and testing renewable energy prototypes. He is detail-oriented, able to problem solve independently, and has strong communication skills. His previous roles include designing a portable biomass gasifier unit and performing electrical load analysis for emergency power systems.
Gunasekhar Karnatham_Profile_Continental
This document provides a summary of Gunasekhar Karnatham's background and experience. He has over 9 years of experience in automotive systems engineering, hardware engineering, and component engineering. Currently, he works as a senior systems engineer at Continental Automotive, where he manages stakeholder requirements and system testing for GM's memory seat module ECU development. Previously he has worked on airbag electronic control units, body control modules, telematics systems, and medical equipment. He is proficient in systems requirements engineering, hardware design, testing, and automotive communication protocols like CAN and LIN.
Final Resume
The document is a resume for Adulis Y. Abun, an electrical engineer with over 2 years of experience in power systems and power electronics. He has a Master's degree in Electric Power Engineering from Chalmers University of Technology in Sweden and is seeking opportunities in power system studies, protection, and design. His experience includes projects in power network design, power electronic design, and electrical installation and maintenance. He is currently working as a Manufacturing Engineer at Fresenius Medical Care.
Gabriel_Salguero
Gabriel Salguero is a senior electronics technician with over 17 years of experience in the aerospace and electric vehicle industries. He has skills in troubleshooting, interpreting technical drawings, and managing multiple tasks. Salguero currently works as a validation technician at Faraday Future, where he performs testing on powertrains and builds test equipment.
Scott Picco Resume - current
Scott Picco is seeking an engineering management or senior engineering position involving renewable energy products. He has over 15 years of experience in electrical engineering, project management, and product certification for renewable energy equipment. This includes extensive knowledge of relevant standards and managing large certification projects up to 1 year in length for clients in the US, Europe, and Asia.
TANGO Project Poster v2
The TANGO project involves Atos, Bull, Deltatec, the University of Leeds, CETIC, and the Barcelona Supercomputing Center working to simplify how developers approach next-generation applications and heterogeneous hardware including clusters, chips, and programmable logic devices. The project aims to optimize energy and performance, enable fast prototyping through software emulation and hardware-in-the-loop, monitor underlying infrastructures, define self-adaptation behaviors at runtime, and specify critical and non-critical quality behaviors for applications.
Rameez cv1
Rameez A.R has over 8 years of experience in the oil and gas industry as an electrical engineer and currently holds the role of Quality Control Supervisor at Baker Hughes in Dubai, UAE. He has a background in project management, quality control, and electrical systems. Previously he held roles as an AMO Process Engineer and Maintenance Engineer at Baker Hughes where he implemented LEAN processes and developed diagnostic systems. He is seeking a stable position where he can provide support critical to organizational success.
Using formal methods in Industrial Software Development
The document discusses the use of formal methods in software development. It provides an overview of I-Mathic, a formal method developed by Imtech that uses sequence enumeration and CSP (Communicating Sequential Processes). The document describes examples of applying I-Mathic on industrial projects, finding defects and showing high productivity. Benefits include consistent requirements and few defects, while drawbacks include limited tool integration and requiring abstract thinking. I-Mathic is currently mandated for in-house projects and continues to be developed with universities.
resume_copy1
Ajay Sharma has over 10 months of experience in VLSI design and development. He has a M.Tech in VLSI Systems from Shiv Nadar University with a CGPI of 8.9. He has knowledge in areas like digital design, RTL verification, mixed signal design, and low power RTL design characterization. He has worked at Synopsys since March 2015 as a contractor, where he led activities related to low power verification of RTL designs. He is proficient with tools like VCS, Verdi, Cadence, and Modelsim.
Topics in Networking for project and thesis
Find out the latest topics in computer networking for your project and thesis.
Techsparks, 2nd floor, D-185, Phase 8B, Industrial Area, Sahibzada Ajit Singh Nagar, Mohali, Punjab 160055
+91- 9465330425
techsparks2013@gmail.com
The Use of Formal Methods on the iFACTS Air Traffic Control Project
The next talk in our series from the recent Open-DO Conference is from Neil White,Principal Engineer with Altran Praxis. His talk provides an overview of the formal methods used on the iFACTS project. iFACTS is delivering increased Air Traffic Control capability to the UK.
360logica At A Glance
360logica is a third party software testing company with over 12 years of experience. It has 150+ employees with an average experience of 5+ years. 360logica provides a full range of testing services including unit, integration, functional, regression, performance, and security testing. It has expertise in test automation using both open source and licensed tools. Some of 360logica's customers include major companies in retail, mobile, e-commerce, and software consulting.
GLENN ALLISON_Software_Tester
This document contains Glenn Allison's resume. It lists his contact information, education, skills, and professional experience. Glenn has a Bachelor's of Science in Information Technology from the University of Phoenix. His experience includes roles as a QA Test Engineer, Asset Management, PC Technician, and Custodian. He has skills in software testing, troubleshooting, Microsoft applications, and technical support.
Resume
Jari Rantamarkkula is a test/design engineer with 25 years of experience at ABB Medium Voltage Products type test laboratory. He has worked testing electronic components and protection relays, including the SPACOM and RELION series. Rantamarkkula has professional experience in type testing, EMC testing, environmental testing, and mechanical testing. He also has experience working in Saudi Arabia, South Korea, United Arab Emirates, and several European territories.
8 Tips To Write A Quality Code
What is a Quality Code?
A high-quality code is a code that is easy to understand and has the least bugs. It performs what is expected of it and follows the level of the language it is written in. Now that you know what I am talking about let's see how we can write quality code.
What's hot (18)
Extended QA testing to enhance productivity of a leading networking solution ...
Extended QA testing to enhance productivity of a leading networking solution ...
Using formal methods in Industrial Software Development
Using formal methods in Industrial Software Development
The Use of Formal Methods on the iFACTS Air Traffic Control Project
The Use of Formal Methods on the iFACTS Air Traffic Control Project
Similar to EnCata - Engineering catalyst
Etrance Networks Introduction
Etrance Networks offers technology consulting and engineering services in Embedded, Networking, Telecom and Security Products. We have expertise in design and development of communication products like Routers, LTE Packet-Gateway and Signaling, Deep Packet inspection, BRAS, Video CDN, Deep Packet Inspection, HTTP/SSL Load-Balancing and Offload Appliance. Etrance was founded by a team with broad experience with MNCs like Cisco, HP, Motorola and technology startups like Movik, Sonoa.
We have four offerings for our clients:
* Talent Development - Training with mini-projects, customized workshops
* Consulting - Product Ideation, architecture, evaluation, prototyping and System Engineering
* Services - Design and Development of Control-Plane, Forwarding-chipset, Management and Platform features
* Product Engineering - Turnkey model for engineering deliverable that includes architecture, development, QA, documentation.
Freelance Robotics Company ProfileV1_4
Freelance Robotics was created in 2009 to provide research and development services to industry, small businesses, and universities. They develop solutions to problems to bridge research and commercialization. Their services include robotics, electronics, IT, mechanics, physics, artificial intelligence, and control systems engineering. They help improve productivity with robotics solutions, develop new products, and improve existing systems. They also offer consultancy services for in-house projects.
Deep learning enhanced digital twin for Closed-loop In-Process Quality Improv...
Deep learning enhanced digital twin for Closed-loop In-Process Quality Improv...WMG centre High Value Manufacturing Catapult
The document outlines an agenda for a workshop on digital twin technology from a manufacturing quality perspective. The workshop will discuss using CAE simulation and artificial intelligence to create digital twins for closed-loop in-process quality improvement. Speakers will discuss applications in automotive and aerospace manufacturing and how digital twin technology can shorten lead times and ramp-up times by improving quality.Pivot International Introduction
Pivot is an engineering and manufacturing company established in 1994 that specializes in new product development and contract manufacturing. It has operations in Kansas, Taiwan, China, and the Philippines. Pivot offers services including industrial design, mechanical engineering, manufacturing, and quality management to effectively improve customers' efficiency and bottom line.
Anthony Pistilli_1_13_2017
Anthony Pistilli has over 30 years of experience in electrical engineering and business management. He has managed engineering departments and startups, with expertise in areas such as RF engineering, manufacturing, and product development. Pistilli holds an MBA and bachelor's in electrical engineering, and has worked for companies such as Nortel, Lexmark, and founded his own startup.
New Vision Soft
New Visions Software provides high quality IT solutions and services including software products, venture projects, and expertise in areas such as research and development, testing, and staffing augmentation. They have over 30 employees across offices in Moscow and Nizhny Novgorod with proven capabilities in industries such as telecommunications, automotive, and financial services.
New Vision Soft
New Visions Software provides high quality IT solutions and services including software products, venture projects, and expertise in areas such as research and development, testing, and staffing augmentation. They have over 30 employees across offices in Moscow and Nizhny Novgorod with proven capabilities in industries such as telecommunications, automotive, and financial services.
New Vision Soft
New Visions Software provides high quality IT solutions and services including software products, venture projects, and expertise in areas such as research and development, testing, and staffing augmentation. They have over 30 employees across offices in Moscow and Nizhny Novgorod with proven capabilities in industries such as telecommunications, automotive, and financial services.
New Vision Soft
New Visions Software provides high quality IT solutions and services including software products, venture projects, and expertise in areas such as audio/video editing, mobile networks, and IT infrastructure. They have over 30 employees across offices in Moscow and Nizhny Novgorod with proven capabilities in R&D, testing, and staffing.
New Vision Soft
New Visions Software provides high quality IT solutions and services including software products, venture projects, and expertise in areas such as research and development, testing, and staffing augmentation. They have over 30 employees across offices in Moscow and Nizhny Novgorod with proven capabilities in industries such as telecommunications, automotive, and financial services.
New visionsoft
New Visions Software provides high quality IT solutions and services including software development, testing, and staffing. They have expertise in areas such as audio and video editing, mobile applications, and telecommunications. Their team of over 30 employees is experienced in research and development, application maintenance, and software engineering.
Strips Catalogue 2015
Strip's is a Slovenian company that has over 20 years of experience in electronics, sensors, and LED technology. They develop energy efficient products such as LED lighting solutions for appliances and general lighting. Their R&D and production capabilities include electronic design, firmware development, prototyping, mechanical design, and certification testing. Strip's provides original design manufacturing and electronic manufacturing services to customers.
MayorTek Technical Services - Overview
The document provides an overview of technical services offered by MayorTek including product development, engineering design, quality management, project management, and various specialized services. Key services described include mechanical, electrical, and software engineering; industrial design; systems architecture; testing; regulatory compliance; value analysis; and approaches to optimize design such as design for manufacturing and quality.
Profile tulasi digital_health
Early diagnosis of infectious diseases and monitoring of community health are essential
for delivering cost-effective healthcare solutions. Healthcare delivery in developing coun-
tries have many challenges because they do not have enough resources for meeting the
healthcare needs, and they lack testing lab infrastructures in communities. It is necessary that a solution must be developed to safeguard the impacted communities. It has
been proven that Point-Of-Care (POC) testing can be considered as one of the ways to
resolve the crisis in healthcare delivery in these communities. The term 'POC testing'
has been used in many contexts. Use case, where a passenger in an autonomous vehicle
is driven to the nearest hospital for an emergency treatment due to an alert received by
the health monitoring system in the car. The POC that the research exploring is for
the use for a remote patient who does not have access to lab testing facilities because of
the social and economic conditions in that community.
The POC testing is a mission critical processes in which the patient conduct tests in a
home environment, as opposed to the tests undertaken otherwise in a laboratory facility
and it needs a communication system of architecture support which the research refers
as POCT system. The research looked at the requirements and made recommendations concerning critical aspects: requirements gathering for POCT system, design and
development methods of secure communication architecture, finding a suitable strategy
for testing the system and project managing the end-2-end process.
Data security is another critical factor in healthcare data. The research came up with
secure data communication architecture and processes for the system. A secure data
storage for the test results are needed, and the research came up with an architecture
for cloud storage. Deployment and expansion of the secure communication system are
essential for practical use cases based on community needs, and a scalable communication
architecture was developed to support the objective.
iLumTech - Electronic design services
Electronic solutions and services of iLumTech:
- hardware, software, firmware, labware design
- eletronic design review
- complete laboratory services
Embedded software, hardware design and automation software
We're looking forward to the new business,long term partnership,long term relationship in software and IT industry.
We're strong in:
- Embedded software
- Instruments control, automation software, automation test architecture
- Mobile solutions includes server side and mobile side
- Hardware design
- System integration
- Home automation based on AllJoyn
Protocols:
GPIB, Ethenet, Bluetooth, CATs, D-Bus AllJoyn, C-Bus, ZigBee, Z-Wave, NI-Visa USB, IEEE 1588, PXI, CRDC
Arocom - Projects and Resource Portfolio.pdf
Arocom is a consulting and solution engineering company with expertise in providing engineering services for AI & Machine Learning, Data Operations & Analytics, MLOps and Cloud Computing.
Our clients include companies within biotech, drug discovery, therapeutics, manufacturing, retail and startups. Our consultants are best in their skills and offer hands-on talent to our clients in achieving their goals.
nippon semiconductor
The document discusses NEC Electronics, a semiconductor company that provides products like microcontrollers, memory, and integrated circuits. It focuses on key aspects of the company's operations including its products, critical success factors, quality initiatives, flexibility, innovation, and strategies to reduce production cycle times. The company aims to offer cost-effective, high-quality solutions while maintaining a flexible and innovative approach.
Resume_mohan
N. Mohan is seeking a challenging technical position in engineering. He has over 10 years of experience in testing, failure analysis, and repair of electronic devices. His previous roles include junior engineer, failure analyzing engineer, and debug technician. He has strong skills in testing methodologies, failure analysis, debugging, and maintenance of test equipment. He is proficient with various testing and measurement tools from Agilent and Tektronics.
Pratik Shah_Revised Resume
Pratik Shah has over 11 years of experience in electrical design and project management. He has extensive experience designing hardware systems including microcontroller and microprocessor-based boards. He has managed complex technical projects from proposal through delivery and ensured they were completed on time and under budget. He is proficient in areas like system architecture, mixed-signal circuit design, PCB layout, integration, and project management.
Similar to EnCata - Engineering catalyst (20)
Deep learning enhanced digital twin for Closed-loop In-Process Quality Improv...
Deep learning enhanced digital twin for Closed-loop In-Process Quality Improv...
Embedded software, hardware design and automation software
Embedded software, hardware design and automation software
Recently uploaded
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Recycled Concrete Aggregate in Construction Part III
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
New techniques for characterising damage in rock slopes.pdf
rock mass characterization and New techniques for characterising damage in rock slopes
ACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
Recycled Concrete Aggregate in Construction Part II
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
A review on techniques and modelling methodologies used for checking electrom...
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
Literature Review Basics and Understanding Reference Management.pptx
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
官方认证美国密歇根州立大学毕业证学位证书原版一模一样
原版一模一样【微信：741003700 】【美国密歇根州立大学毕业证学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
Recently uploaded (20)
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Engineering Drawings Lecture Detail Drawings 2014.pdf
Engineering Drawings Lecture Detail Drawings 2014.pdf
Recycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part III
New techniques for characterising damage in rock slopes.pdf
New techniques for characterising damage in rock slopes.pdf
Recycled Concrete Aggregate in Construction Part II
Recycled Concrete Aggregate in Construction Part II
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Literature Review Basics and Understanding Reference Management.pptx
Literature Review Basics and Understanding Reference Management.pptx
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
EnCata - Engineering catalyst
- 1. Product Development Service We develop, engineer and integrate SOFTWARE and HARDWARE with functionality design for 21st century
- 3. Desruptive research Applied research Product idea Prototype First test product Commercial end product Pilot production Manufacturing TRL-1 Basic principles observed TRL-2 Technology concept formulated TRL-3 Experimental proof of concept TRL-4 Technology validated in lab TRL-5 Technology validated in relevant enviroment TRL-6 Technology demonstrated in relevant enviroment TRL-7 System prototype demonstration in operational enviroment TRL-8 System complete and qualified TRL-9 Actual system proven in operational enviroment Development process practiced in EnCata
- 4. We pay high attention to details when planning the project in our ERP system Defining requirements and performing knowledge transfer of the product concept in tight collaboration with the client We achieve superior project efficiency by employing 3D CAD design The process of creating the technical documentation and specification is container with out PDM system We build a prototype in-house by hands of our engineers, who designed the prototype The prototype, technical documentation, specification handled to the client Structured Project Planning
- 5. Intellectual property rights The IP that is being created during the project belongs to the customer; We foster IP handling from the client to us and back through and NDA agreement; Project documentation can be held on client’s cloud to ensure transparency in data accumulation; NDA We understand trust, competence and repetitiveness is at the core of our business and relationship with the client
- 6. Prototyping capabilities Prototyping in plastic Plastic casing rapid prototyping; Mold forms prototyping; Complex geometry mock-up design; Prototyping in metal Laser cutting, sheet metal bending; All types of welding; Polymer coating; Five-access CNC machining; Electronics Prototyping Printed Circuit Board (PCB) prototyping; Breadboard and proof of concept designs; Testing facilities for power electronics power with up to 16 kW power; Industrial electronics and Automation;
- 7. High competences Team of bright scientists, design englineers and technologistsl A great combination of young talents and experienced senior engineers; Ability to scale up Ability to quickly expand project teams; Access to international level labs and scientific equipment; Standartized processes and project management Own ERP system, tailored to EnCata’s processes and resource allocation; Agile project management; Competitive rates We are based in Eastern Europe (Belarus and Lithuania), therefore enjoying unique opportunity to be European, efficient and cost-competitive Fast development time Typical project delivery time (from ideation to a prototype) is 6-9 weeks; Our advantages
- 8. Boston +1-857-302-4299 Suhar +968 99 41 13 08 Prague +420 (77) 483-94-19 Brussels +32-475-30-90-87 Minsk (HQ) +375(44) 472-50-31 Tallinn and Riga +371 (29) 21-93-16 +372 (58) 86-84-07 Dr. Peter Dudin p.dudin_work | pd@encata.net encata.net +375-(44)-472-50-31 Partner. Head of business development challenge Do you have a to solve?