Embest s3 cev40 _neomore
•
0 likes•527 views
The Embest S3CEV40 evaluation board is a development platform for Samsung's S3C44B0X ARM7 microcontroller. It includes the S3C44B0X processor, flash memory, RAM, LCD interface, serial ports, Ethernet, USB and other peripherals. The board comes with boot code, sample programs, and uClinux source code to develop applications for the microcontroller. Additional development tools and training packages are available to purchase.
Report
Share
Report
Share
Download to read offline
Recommended
Stm32 f4 first touch
The document discusses using an STM32F407VGT6 microcontroller with 168MHz Cortex-M4 CPU, 1MB flash, and 192KB RAM. It provides instructions for downloading toolchains, firmware, and debugging software to interface with the microcontroller via an onboard ST-LINK/V2 debugger over USB or JTAG. The STM32F4 Discovery board is highlighted as a development platform for experimenting with the microcontroller.
Rico board
The Rico Board is an excellent high-performance Single Board Computer using the newest TI’s AM437x Sitara ARM Cortex-A9 based solution. It has 512MB DDR3, 4GB eMMC Flash, 16MB QSPI Flash and 32KB EEPROM on board, featuring various peripherals like Debug Serial, USB, Gigabit Ethernet, Dual-Camera, TF, HDMI, LCD and etc. It is preloaded with Linux and supplied with optional 7-inch LCD Module including capacitive touch screen. More information can be found at MYIR's website: http://www.myirtech.com/list.asp?id=510
MYS-8MMX Single Board Computer
The MYS-8MMX Single Board Computer has a compact design with only 95mm by 65mm form factor. It is powered by NXP’s first embedded multicore applications processor i.MX 8M Mini which features up to 1.8GHz quad-core ARM Cortex-A53 plus 400MHz Cortex-M4 processor. The tiny board takes full features of the processor and is equipped with 2GB DDR4, 8GB eMMC and 32MB QSPI Flash. It has explored rich peripheral interfaces through headers and connectors including two USB 2.0 Host, one USB OTG, one Gigabit Ethernet, TF card, M.2 interface, LVDS LCD interface, MIPI CSI interface, HDMI output, IO expansion interface and more others. The AP6256 WiFi/BT module on the board also allows wireless communications with other devices. It is capable of running Linux operating system based on the Yocto 3.0 or Ubuntu 18.04 .
Rdl esp32 development board trainer kit
Designed keeping in mind the latest technology on a single board. It is really easy to design, experiment with, and test circuitry without soldering. Students can explore a wide variety of electronic concepts simply by placing components on to the breadboard. It is very useful in electronics laboratories for performing IoT experiments. It is also useful to build and test circuits as well as making projects related to IoT integrating with the cloud platform. visit https://researchdesignlab.com/esp32-development-board-trainer-kit.html for more details
S5L2010 datasheet
The document provides an overview of the S5L2010 DPF processor. Key details include:
- It is built around an ARM9 core and includes video/audio decoding, display, and peripheral interfaces.
- Main features include support for MPEG video/audio, JPEG decoding, LCD interfaces, memory card interfaces, and timers/PWM outputs.
- It comes in several packages targeting different display types and includes various peripherals and interfaces.
Introduction to Arduino
Arduino is an open-source hardware platform used to build interactive electronic projects by providing a standard hardware and software environment. The document provides instructions on installing the Arduino software, selecting a board, connecting the board to a computer via USB, uploading a sample "Blink" program to make an onboard LED blink, and an overview of the Arduino programming model using setup() and loop() functions.
Single board computer options
includes 1. Rpi
2. Arduino
3. BeagleBone Black
4. Banana Pi
5. PandaBoard
6. LinkSprite pcDuino
7. Intel Galileo Gen 2 -
8. Intel NUC series -
9. Cotton Candy
10. Odroid-C1
11. Humming Board i1
12 . Minnowboard Max
13 . NanoPC-T1
14 . Cubieboard
15. udoo
16. cubox
How to Make an Eight Bit Computer and Save the World!
This document summarizes a talk given to introduce an open source 8-bit computer project called the Humane Reader. The talk outlines the goals of providing a cheap e-book reader and computing platform using open source tools. It describes the hardware design which uses an AVR microcontroller and interfaces like video output, SD card, and USB. The talk also covers using open source tools for development and sourcing low-cost fabrication and assembly. The overall goals are to create an inexpensive device that can provide educational resources in developing areas.
Recommended
Stm32 f4 first touch
The document discusses using an STM32F407VGT6 microcontroller with 168MHz Cortex-M4 CPU, 1MB flash, and 192KB RAM. It provides instructions for downloading toolchains, firmware, and debugging software to interface with the microcontroller via an onboard ST-LINK/V2 debugger over USB or JTAG. The STM32F4 Discovery board is highlighted as a development platform for experimenting with the microcontroller.
Rico board
The Rico Board is an excellent high-performance Single Board Computer using the newest TI’s AM437x Sitara ARM Cortex-A9 based solution. It has 512MB DDR3, 4GB eMMC Flash, 16MB QSPI Flash and 32KB EEPROM on board, featuring various peripherals like Debug Serial, USB, Gigabit Ethernet, Dual-Camera, TF, HDMI, LCD and etc. It is preloaded with Linux and supplied with optional 7-inch LCD Module including capacitive touch screen. More information can be found at MYIR's website: http://www.myirtech.com/list.asp?id=510
MYS-8MMX Single Board Computer
The MYS-8MMX Single Board Computer has a compact design with only 95mm by 65mm form factor. It is powered by NXP’s first embedded multicore applications processor i.MX 8M Mini which features up to 1.8GHz quad-core ARM Cortex-A53 plus 400MHz Cortex-M4 processor. The tiny board takes full features of the processor and is equipped with 2GB DDR4, 8GB eMMC and 32MB QSPI Flash. It has explored rich peripheral interfaces through headers and connectors including two USB 2.0 Host, one USB OTG, one Gigabit Ethernet, TF card, M.2 interface, LVDS LCD interface, MIPI CSI interface, HDMI output, IO expansion interface and more others. The AP6256 WiFi/BT module on the board also allows wireless communications with other devices. It is capable of running Linux operating system based on the Yocto 3.0 or Ubuntu 18.04 .
Rdl esp32 development board trainer kit
Designed keeping in mind the latest technology on a single board. It is really easy to design, experiment with, and test circuitry without soldering. Students can explore a wide variety of electronic concepts simply by placing components on to the breadboard. It is very useful in electronics laboratories for performing IoT experiments. It is also useful to build and test circuits as well as making projects related to IoT integrating with the cloud platform. visit https://researchdesignlab.com/esp32-development-board-trainer-kit.html for more details
S5L2010 datasheet
The document provides an overview of the S5L2010 DPF processor. Key details include:
- It is built around an ARM9 core and includes video/audio decoding, display, and peripheral interfaces.
- Main features include support for MPEG video/audio, JPEG decoding, LCD interfaces, memory card interfaces, and timers/PWM outputs.
- It comes in several packages targeting different display types and includes various peripherals and interfaces.
Introduction to Arduino
Arduino is an open-source hardware platform used to build interactive electronic projects by providing a standard hardware and software environment. The document provides instructions on installing the Arduino software, selecting a board, connecting the board to a computer via USB, uploading a sample "Blink" program to make an onboard LED blink, and an overview of the Arduino programming model using setup() and loop() functions.
Single board computer options
includes 1. Rpi
2. Arduino
3. BeagleBone Black
4. Banana Pi
5. PandaBoard
6. LinkSprite pcDuino
7. Intel Galileo Gen 2 -
8. Intel NUC series -
9. Cotton Candy
10. Odroid-C1
11. Humming Board i1
12 . Minnowboard Max
13 . NanoPC-T1
14 . Cubieboard
15. udoo
16. cubox
How to Make an Eight Bit Computer and Save the World!
This document summarizes a talk given to introduce an open source 8-bit computer project called the Humane Reader. The talk outlines the goals of providing a cheap e-book reader and computing platform using open source tools. It describes the hardware design which uses an AVR microcontroller and interfaces like video output, SD card, and USB. The talk also covers using open source tools for development and sourcing low-cost fabrication and assembly. The overall goals are to create an inexpensive device that can provide educational resources in developing areas.
Basics of open source embedded development board (
A microcontroller is a computer on a single integrated chip that contains a processor, memory, and input/output ports. Common microcontroller families include Intel, Atmel, Microchip, and ARM. Microcontrollers are used in devices like cellphones, toys, appliances, cars, and cameras. The Arduino is a popular open-source hardware and software platform for building prototypes and interactive objects. It uses a simple programming language based on C/C++ and is inexpensive and easy to use.
Pentium 3
The document discusses the system requirements for two different software applications. For the Pentium 3 game, the requirements include Windows XP or Vista, a Pentium 3 800 MHz processor or faster, 32 MB RAM, and 51 MB hard drive space. It also lists various graphics cards and features supported. For the Oldenburg Measurement Applications (OMA) software, the minimum requirements are Windows 98/ME/2000/XP/Vista, a Pentium 3 1 GHz processor, 256 MB RAM, 1 GB hard drive space, and various peripheral hardware depending on the specific measurement tasks. It supports multiple hardware modules and uses a shared Borland Paradox database.
Vinculum-II Embedded Dual USB Host Controller IC
The document summarizes the Vinculum-II Embedded Dual USB Host Controller IC from FTDI. It features a dual USB 2.0 host/slave controller with an embedded MCU, flash memory, and RAM. It has interfaces like USB, UART, SPI, GPIO and PWM. Typical applications include USB flash drives, cameras, and embedded device interfaces. The software development tool suite includes a compiler, debugger and libraries to support firmware development.
FRDM-KL46Z_Hands-On_Presentation_v02
The document provides information about a Freescale USB Academy training on ARM Cortex-M0+ using the FRDM-KL46Z board. It includes:
- An overview of the KL46Z256 microcontroller and FRDM-KL46Z board.
- Details of four labs that will be covered: Lab 0 demonstrates a basic "hello world" blinky program; Lab 1 implements a USB HID mouse using the accelerometer; Lab 2 implements a USB CDC serial device; Lab 3 implements a USB mass storage host.
- Information on using mbed.org and the OpenSDA debug interface to program the board.
About PSoC
This document introduces the PSoC 3, which is described as the world's only programmable system on chip (SoC). It integrates configurable analog and digital peripherals, memory and a microcontroller onto a single chip. This was the first programmable SoC and offers benefits over traditional embedded solutions like reduced board costs, power efficiency, flexibility for changing specs, and the ability to address complex mixed-signal requirements with one programmable device. The document lists industries that use PSoC and different PSoC products.
MYC-YA15XC-T CPU Module
Measuring only 39mm by 37mm, the MYC-YA15XC-T CPU Module is MYIR’s another System-on Module (SoM) based on ST STM32MP1 series processors after the first release of the MYC-YA157C CPU Module, The new MYC-Y157XC-T module has integrated the STM32MP151AAC3T processor by default and a dedicated Power Management IC STPMIC1 also from STMicroelectronics. It has onboard DDR3L, Nand Flash or eMMC and 32KB EEPROM. A number of peripherals and IO signals are brought out through 1.0 mm pitch 148-pin stamp-hole (Castellated-Hole) expansion interface to make the module an excellent embedded controller for applications like industrial control, consumer electronics, smart home, medical and etc. The MYC-YA15XC-T is running Linux with provided 5.4.31 kernel and many drivers in source code.
Mini Formation - Raspberry pi
The document discusses the specifications of the Raspberry Pi Models A and B, including the processors, memory, ports, storage, and operating systems they support. It also lists some common applications for the Raspberry Pi such as a streaming media center, arcade machine, tablet computer, and home automation. The document concludes with an example of using the Raspberry Pi to power an interactive assistant that can answer questions.
Computer Maintanance
This document summarizes the key components of computer motherboards, processors, and memory. It discusses motherboard form factors, chipsets, expansion slots, memory types, CPU sockets, power supplies, cooling systems, storage devices, interfaces, and input/output ports. Specific topics covered include motherboard components like the northbridge and southbridge, memory technologies like DDR RAM, storage devices like hard drives, SSDs and optical drives, as well as expansion cards, ports, and connectors.
Arduino Microcontroller
In these slides we have disused about AVR Micro controllers, AVR Architecture and Program Memory Map and Packages.
Top 10 Microcontrollers and Development Boards for Students
Learn about the popular microcontrollers and developments boards which are easy to use and have great features to learn and use.
Multipilot pres-ufficiale def
- The document describes the Multipilot 32, a flight controller board developed by LASER NAVIGATION.
- It has an ARM Cortex-M3 processor, 512KB flash memory, 64KB RAM, and interfaces for sensors, radios, motors and more.
- The board runs ChibiOS or VROS and supports projects like OpenPilot, AutoPilot and Paparazzi. It is compatible with many sensors, radios and brushless ESC/servos.
- Developers can use IDEs like CooCox, Eclipse, or commercial options, with libraries for sensor control, radio control and more.
- The Multipilot 32 is available for pre-
MYS-6ULX Single Board Computer for Industry 4.0 and IoT Applications
The document introduced MYIR's i.MX 6UL / 6ULL based ARM Cortex-A7 Single Board Computer for Industry 4.0 and IoT applications which is ready to run Linux with high performance and ulta low cost.
Arduino uno
The Arduino Uno is a microcontroller board based on the ATmega328P chip. It has 32KB of flash memory, 2KB of SRAM, and 1KB of EEPROM. The board has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter to get started.
Arduino IDE
The document discusses the Arduino integrated development environment and essential functions. It explains that the void setup() function is used to declare pin modes and that void loop() is used for repetitive tasks. It also describes functions for configuring pin modes as inputs or outputs with pinMode(), reading digital and analog pin values with digitalRead(), analogRead(), and writing values to pins with digitalWrite() and analogWrite().
JT2016DV
Juay K. Tan is a design verification engineer with over 30 years of experience in IC design, verification, and software. He holds a MSEE from Utah State University and BSEE from National Taiwan University. He has worked at several companies verifying and developing test environments for ASICs, FPGAs, and SoCs. Currently, he is a staff design verification engineer at Infinera developing test environments and tests using SystemVerilog and UVM.
vidéosurveillance IP et HD a Marrakech
Passez à la Haute Définition en gardant vos câbles ! pack camera surveillance HD Marrakech. Enfin Transformez votre ancienne installation analogique en HD
Hardware Hacking area: Make Cool Things with Microcontrollers (and learn to s...
1) Microcontrollers are fun to play with and anyone can learn to make cool projects with them.
2) Examples of cool microcontroller projects include the TV-B-Gone universal remote, MiniPOV3 kit, Solar BugBot, LED Cube, and The Brain Machine.
3) A microcontroller is a complete computer on a chip that can accept input, perform operations, and output results. It works by fetching and executing instructions in a loop until powered off.
Pentium II
The Pentium Pro was a sixth generation x86 microprocessor introduced by Intel on November 1, 1995. It contained 5.5 million transistors and had an 8KB + 8KB L1 cache and 256KB, 512KB, or 1024KB L2 cache clocked at CPU speed. The Pentium Pro had a Socket 8 connection and used a 60-66MHz front side bus with a 3.1-3.3V core and was fabricated at 0.50 or 0.35 microns, clocking at 150-200MHz.
Arduino uno
The document describes the major components of an Arduino Uno board. It explains that the board contains a microcontroller, analog and digital pins that can be used for inputs or outputs, a USB connector for programming and power, a power port for an external power source, and LEDs and chips to facilitate communication. The microcontroller is an Atmega328P that contains memory and a CPU to run loaded programs. The board converts sensor signals to digital values and allows control of connected components through its pins.
MYD-Y6ULX Development Board for i.MX 6UL/6ULL ARM Cortex-A7 Processors
The MYD-Y6ULX development board is a complete evaluation platform for NXP’s i.MX 6UltraLite / 6ULL processor family, which can operate at 528 MHz and features the most efficient ARM Cortex-A7 core, providing various memory interfaces and enhancing the flexibility and convenience of the board to connect peripheral devices. The board is ready to run Linux and supports industrial operating temperature range from -40 to +85 Celsius. employs the MYC-Y6ULX CPU Module as the controller board by populating the CPU Module on its base board through 1.0mm pitch 140-pin stamp hole interface. The MYC-Y6ULX CPU Module is mounted with a shield cover and integrated with core components including i.MX 6UltraLite / 6ULL processor, 256MB DDR3, 256MB Nand Flash or optional 4GB eMMC and Ethernet PHY. The base board has extended rich peripherals through connectors and headers like Serial ports, USB, Ethernet, CAN, Micro SD card, WiFi module, LCD/Touch screen, Camera, Audio as well as a Mini PCIe interface for optional USB based 4G LTE module. It is a versatile platform and solid reference design delivered with necessary cable accessories and detailed documentations ideal for prototype and evaluation based on i.MX 6UL/6ULL solutions.
Design and implementation of an ancrchitecture of embedded web server for wir...
Abstract In this paper, the embedded web server, by means of ARM9-S3C2440 processor as core, its operating system is Linux, and the system hardware architecture is obtainable. We present the principles and to plan a system for Internet-based data-acquisition system and control by using Advanced RISC Machine (ARM9) processor and in-build web server application. Client can observe and control remote temperature and video information. The platform used is Linux and ARM 9 processed. The embedded web server technology is the amalgamation of embedded device and Internet technology, which provide a flexible remote device monitor and management function base on an Internet browser and it has turn into an superior development trend of embedded technology and realize an embedded web server, which enable data acquisition and status monitor with the assist of any standard web browser. This embedded web server user can right of entry their equipment remotely. The embedded web server plan includes a total web server with TCP/IP support and Ethernet interface. It consists of application programs written in C-programming in LINUX for accessing data through the serial port and updating the web page, porting of Linux Kernel with application program on ARM9 board. Then the procedure of the Linux operating system being transplanted on ARM is introduced. Enterprise users can work together more flexibly and cost-effectively with business and trading partners. The server enable Web access to distributed measurement/control systems and provide optimization for educational laboratories, instrumentation, Industrial and home automation. The proposed system eliminates the need for server software and preservation and minimize the operational costs while operating with a big amount of data. The big benefit of this web server is embedding a PC based web server into the ARM platform without losing any of its features. Key Words: Code Vision AVR C Compiler, ARM-LINUX-GCC Compiler, LINUX KERNEL, ARM9 Processor, Embedded Web Server, XBEE Modules.
More Related Content
What's hot
Basics of open source embedded development board (
A microcontroller is a computer on a single integrated chip that contains a processor, memory, and input/output ports. Common microcontroller families include Intel, Atmel, Microchip, and ARM. Microcontrollers are used in devices like cellphones, toys, appliances, cars, and cameras. The Arduino is a popular open-source hardware and software platform for building prototypes and interactive objects. It uses a simple programming language based on C/C++ and is inexpensive and easy to use.
Pentium 3
The document discusses the system requirements for two different software applications. For the Pentium 3 game, the requirements include Windows XP or Vista, a Pentium 3 800 MHz processor or faster, 32 MB RAM, and 51 MB hard drive space. It also lists various graphics cards and features supported. For the Oldenburg Measurement Applications (OMA) software, the minimum requirements are Windows 98/ME/2000/XP/Vista, a Pentium 3 1 GHz processor, 256 MB RAM, 1 GB hard drive space, and various peripheral hardware depending on the specific measurement tasks. It supports multiple hardware modules and uses a shared Borland Paradox database.
Vinculum-II Embedded Dual USB Host Controller IC
The document summarizes the Vinculum-II Embedded Dual USB Host Controller IC from FTDI. It features a dual USB 2.0 host/slave controller with an embedded MCU, flash memory, and RAM. It has interfaces like USB, UART, SPI, GPIO and PWM. Typical applications include USB flash drives, cameras, and embedded device interfaces. The software development tool suite includes a compiler, debugger and libraries to support firmware development.
FRDM-KL46Z_Hands-On_Presentation_v02
The document provides information about a Freescale USB Academy training on ARM Cortex-M0+ using the FRDM-KL46Z board. It includes:
- An overview of the KL46Z256 microcontroller and FRDM-KL46Z board.
- Details of four labs that will be covered: Lab 0 demonstrates a basic "hello world" blinky program; Lab 1 implements a USB HID mouse using the accelerometer; Lab 2 implements a USB CDC serial device; Lab 3 implements a USB mass storage host.
- Information on using mbed.org and the OpenSDA debug interface to program the board.
About PSoC
This document introduces the PSoC 3, which is described as the world's only programmable system on chip (SoC). It integrates configurable analog and digital peripherals, memory and a microcontroller onto a single chip. This was the first programmable SoC and offers benefits over traditional embedded solutions like reduced board costs, power efficiency, flexibility for changing specs, and the ability to address complex mixed-signal requirements with one programmable device. The document lists industries that use PSoC and different PSoC products.
MYC-YA15XC-T CPU Module
Measuring only 39mm by 37mm, the MYC-YA15XC-T CPU Module is MYIR’s another System-on Module (SoM) based on ST STM32MP1 series processors after the first release of the MYC-YA157C CPU Module, The new MYC-Y157XC-T module has integrated the STM32MP151AAC3T processor by default and a dedicated Power Management IC STPMIC1 also from STMicroelectronics. It has onboard DDR3L, Nand Flash or eMMC and 32KB EEPROM. A number of peripherals and IO signals are brought out through 1.0 mm pitch 148-pin stamp-hole (Castellated-Hole) expansion interface to make the module an excellent embedded controller for applications like industrial control, consumer electronics, smart home, medical and etc. The MYC-YA15XC-T is running Linux with provided 5.4.31 kernel and many drivers in source code.
Mini Formation - Raspberry pi
The document discusses the specifications of the Raspberry Pi Models A and B, including the processors, memory, ports, storage, and operating systems they support. It also lists some common applications for the Raspberry Pi such as a streaming media center, arcade machine, tablet computer, and home automation. The document concludes with an example of using the Raspberry Pi to power an interactive assistant that can answer questions.
Computer Maintanance
This document summarizes the key components of computer motherboards, processors, and memory. It discusses motherboard form factors, chipsets, expansion slots, memory types, CPU sockets, power supplies, cooling systems, storage devices, interfaces, and input/output ports. Specific topics covered include motherboard components like the northbridge and southbridge, memory technologies like DDR RAM, storage devices like hard drives, SSDs and optical drives, as well as expansion cards, ports, and connectors.
Arduino Microcontroller
In these slides we have disused about AVR Micro controllers, AVR Architecture and Program Memory Map and Packages.
Top 10 Microcontrollers and Development Boards for Students
Learn about the popular microcontrollers and developments boards which are easy to use and have great features to learn and use.
Multipilot pres-ufficiale def
- The document describes the Multipilot 32, a flight controller board developed by LASER NAVIGATION.
- It has an ARM Cortex-M3 processor, 512KB flash memory, 64KB RAM, and interfaces for sensors, radios, motors and more.
- The board runs ChibiOS or VROS and supports projects like OpenPilot, AutoPilot and Paparazzi. It is compatible with many sensors, radios and brushless ESC/servos.
- Developers can use IDEs like CooCox, Eclipse, or commercial options, with libraries for sensor control, radio control and more.
- The Multipilot 32 is available for pre-
MYS-6ULX Single Board Computer for Industry 4.0 and IoT Applications
The document introduced MYIR's i.MX 6UL / 6ULL based ARM Cortex-A7 Single Board Computer for Industry 4.0 and IoT applications which is ready to run Linux with high performance and ulta low cost.
Arduino uno
The Arduino Uno is a microcontroller board based on the ATmega328P chip. It has 32KB of flash memory, 2KB of SRAM, and 1KB of EEPROM. The board has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter to get started.
Arduino IDE
The document discusses the Arduino integrated development environment and essential functions. It explains that the void setup() function is used to declare pin modes and that void loop() is used for repetitive tasks. It also describes functions for configuring pin modes as inputs or outputs with pinMode(), reading digital and analog pin values with digitalRead(), analogRead(), and writing values to pins with digitalWrite() and analogWrite().
JT2016DV
Juay K. Tan is a design verification engineer with over 30 years of experience in IC design, verification, and software. He holds a MSEE from Utah State University and BSEE from National Taiwan University. He has worked at several companies verifying and developing test environments for ASICs, FPGAs, and SoCs. Currently, he is a staff design verification engineer at Infinera developing test environments and tests using SystemVerilog and UVM.
vidéosurveillance IP et HD a Marrakech
Passez à la Haute Définition en gardant vos câbles ! pack camera surveillance HD Marrakech. Enfin Transformez votre ancienne installation analogique en HD
Hardware Hacking area: Make Cool Things with Microcontrollers (and learn to s...
1) Microcontrollers are fun to play with and anyone can learn to make cool projects with them.
2) Examples of cool microcontroller projects include the TV-B-Gone universal remote, MiniPOV3 kit, Solar BugBot, LED Cube, and The Brain Machine.
3) A microcontroller is a complete computer on a chip that can accept input, perform operations, and output results. It works by fetching and executing instructions in a loop until powered off.
Pentium II
The Pentium Pro was a sixth generation x86 microprocessor introduced by Intel on November 1, 1995. It contained 5.5 million transistors and had an 8KB + 8KB L1 cache and 256KB, 512KB, or 1024KB L2 cache clocked at CPU speed. The Pentium Pro had a Socket 8 connection and used a 60-66MHz front side bus with a 3.1-3.3V core and was fabricated at 0.50 or 0.35 microns, clocking at 150-200MHz.
Arduino uno
The document describes the major components of an Arduino Uno board. It explains that the board contains a microcontroller, analog and digital pins that can be used for inputs or outputs, a USB connector for programming and power, a power port for an external power source, and LEDs and chips to facilitate communication. The microcontroller is an Atmega328P that contains memory and a CPU to run loaded programs. The board converts sensor signals to digital values and allows control of connected components through its pins.
MYD-Y6ULX Development Board for i.MX 6UL/6ULL ARM Cortex-A7 Processors
The MYD-Y6ULX development board is a complete evaluation platform for NXP’s i.MX 6UltraLite / 6ULL processor family, which can operate at 528 MHz and features the most efficient ARM Cortex-A7 core, providing various memory interfaces and enhancing the flexibility and convenience of the board to connect peripheral devices. The board is ready to run Linux and supports industrial operating temperature range from -40 to +85 Celsius. employs the MYC-Y6ULX CPU Module as the controller board by populating the CPU Module on its base board through 1.0mm pitch 140-pin stamp hole interface. The MYC-Y6ULX CPU Module is mounted with a shield cover and integrated with core components including i.MX 6UltraLite / 6ULL processor, 256MB DDR3, 256MB Nand Flash or optional 4GB eMMC and Ethernet PHY. The base board has extended rich peripherals through connectors and headers like Serial ports, USB, Ethernet, CAN, Micro SD card, WiFi module, LCD/Touch screen, Camera, Audio as well as a Mini PCIe interface for optional USB based 4G LTE module. It is a versatile platform and solid reference design delivered with necessary cable accessories and detailed documentations ideal for prototype and evaluation based on i.MX 6UL/6ULL solutions.
What's hot (20)
Basics of open source embedded development board (
Basics of open source embedded development board (
Top 10 Microcontrollers and Development Boards for Students
Top 10 Microcontrollers and Development Boards for Students
MYS-6ULX Single Board Computer for Industry 4.0 and IoT Applications
MYS-6ULX Single Board Computer for Industry 4.0 and IoT Applications
Hardware Hacking area: Make Cool Things with Microcontrollers (and learn to s...
Hardware Hacking area: Make Cool Things with Microcontrollers (and learn to s...
MYD-Y6ULX Development Board for i.MX 6UL/6ULL ARM Cortex-A7 Processors
MYD-Y6ULX Development Board for i.MX 6UL/6ULL ARM Cortex-A7 Processors
Viewers also liked
Design and implementation of an ancrchitecture of embedded web server for wir...
Abstract In this paper, the embedded web server, by means of ARM9-S3C2440 processor as core, its operating system is Linux, and the system hardware architecture is obtainable. We present the principles and to plan a system for Internet-based data-acquisition system and control by using Advanced RISC Machine (ARM9) processor and in-build web server application. Client can observe and control remote temperature and video information. The platform used is Linux and ARM 9 processed. The embedded web server technology is the amalgamation of embedded device and Internet technology, which provide a flexible remote device monitor and management function base on an Internet browser and it has turn into an superior development trend of embedded technology and realize an embedded web server, which enable data acquisition and status monitor with the assist of any standard web browser. This embedded web server user can right of entry their equipment remotely. The embedded web server plan includes a total web server with TCP/IP support and Ethernet interface. It consists of application programs written in C-programming in LINUX for accessing data through the serial port and updating the web page, porting of Linux Kernel with application program on ARM9 board. Then the procedure of the Linux operating system being transplanted on ARM is introduced. Enterprise users can work together more flexibly and cost-effectively with business and trading partners. The server enable Web access to distributed measurement/control systems and provide optimization for educational laboratories, instrumentation, Industrial and home automation. The proposed system eliminates the need for server software and preservation and minimize the operational costs while operating with a big amount of data. The big benefit of this web server is embedding a PC based web server into the ARM platform without losing any of its features. Key Words: Code Vision AVR C Compiler, ARM-LINUX-GCC Compiler, LINUX KERNEL, ARM9 Processor, Embedded Web Server, XBEE Modules.
Arm embedded web server based on dac system
for btech, mtech, ece, eee , projecs on domains embedded, matlab, vlsi, image processing, signal processing, communication,fpga please contact @src embedded solution
web:www.srcembedded.com
mail:srcembedded@gmail.com
ph: 8297 313 858
Arm 7 nxp
The document describes the LPC213x and LPC214x microcontroller series from NXP Semiconductors. The LPC213x can operate at up to 60 MHz and features 2 I2C interfaces, 2 UARTs, 1 SPI interface, 1 SSP interface, two 8-channel 10-bit ADCs, 1 10-bit DAC, 4 timers, 47 I/O pins tolerant to 5V signals, and operates from a single 3.3V supply. It includes features such as real-time debugging, an RTC, BOD, POR, and user code security. The LPC214x extends the LPC213x with USB 2.0 device support, faster GPIOs
EMBEDDED WEB SERVER
As the World-Wide Web (WWW) continues to evolve, it is clear that its underlying technologies are useful for much more than just browsing the web. Web browsers have become the
de factor standard user interface for a variety of applications including embedded real time applications such as Remote Data Acquisition System.This brings in a need for web services being deployed on various embedded processors such as Advanced RISC Machine (ARM) in real time context. The main aim of the project is to develop an embedded web server using ARM7 TDMI processor.
The web pages which are required for the web server will be developed using HTML. This embedded web server which will be developed by using Embedded C language can be beneficial for mission critical applications, remote data acquisition systems, ATM and controlling devices such as servo motor, dc motor, stepper motor ,turning ON or OFF the stereo sets., use as dimmerstat to control light intensities. can be used in home automation, store programs in flash memory and run the according to need.
Embedded systems are specialized computer systems designed and optimized to perform a particular task. Usually they are a part of a larger system or a machine In today's world, embedded systems are everywhere homes, offices, cars, factories, hospitals, plains and consumer electronics. They span all aspects of modern life and examples of their use are numerous.
Modern embedded systems are able to connect to the internet and can be remotely maintained and diagnosed . M2M(Machine to machine) communication is growing with a considerable rate. The possibility to connect two or more embedded systems enables developers to build more powerful distributed systems such as networked embedded systems .Remote maintenance is performed by different communication protocols. The most common communication protocol is HTTP which enables remote system control and monitoring.
A web server is a computer program that implements HTTP protocol. It accepts HTTP requests from clients like web browsers and serves HTTP responses which are usually HTML pages with linked objects. There are many web servers available, and a number of them are free, like Apache, AOL , Roxen . Internet Information Services, Sun Java System web Server are some of the most common commercial web servers. Some web servers can run on almost any operating system while others are platform specific.
The general purpose web servers are intended to run on powerful server computers, workstations or personal computers and support a number of advanced features. On the other hand, web servers for embedded system shave limited resources and offer only a set of required features
home automation using ARM7 controller
This document presents a presentation on home automation by Burungale Dhanaji Shivaji. It discusses designing a home automation system using an ARM7 controller that allows controlling home appliances wirelessly via switch, Wi-Fi, or GSM. The system aims to provide effective and efficient control of devices to help elderly or disabled people. It presents the objectives, scope, relevance, block diagram, software/language used, sequence diagrams, and conclusions regarding developing a low-cost, high-performance home automation system that allows easy user interaction through an Android phone.
Armwebserver
Saswat Mohanty presented on developing an embedded web server using an ARM processor and μC/OS-II real-time operating system. The presentation covered the ARM development board used, advantages of ARM for low power and the μC/OS-II RTOS. It described the process of porting μC/OS-II and a webserver to the ARM, integrating components, and testing the system. Potential uses of the embedded web server were also discussed.
Viewers also liked (8)
Design and implementation of an ancrchitecture of embedded web server for wir...
Design and implementation of an ancrchitecture of embedded web server for wir...
Similar to Embest s3 cev40 _neomore
Embedded application development
The document discusses several embedded application development platforms including Arduino, Raspberry Pi, Tiva C Series, and MSP430. It provides overview information on each platform, including key components, features, programming languages supported, and examples of applications. For Arduino, it describes the Arduino Uno board in detail. For Raspberry Pi, it outlines the basic specifications and components. For Tiva C Series and MSP430, it summarizes the development boards and features of the microcontrollers.
Devkit8000 OMAP3530 Evaluation Kit
Embest DevKit8000 Evaluation Kit includes the DevKit8000 OMAP 3530 evaluation board and all necessary accessories to help users start their design of multimedia applications.
Microcontroller from basic_to_advanced
The document discusses various topics related to embedded systems and microcontrollers including:
- Architectures like Von Neumann, Harvard and modified Harvard
- Types of microcontrollers like 8-bit, 16-bit and 32-bit
- Programming languages and IDEs used for embedded programming
- Common development boards and microcontrollers
- Memory types, buses, I/O and basic operation of microcontrollers
- Interfacing sensors and actuators to microcontrollers
Resume_DigitalIC_1
Yunn Chyi Chen has over 15 years of experience in hardware design and verification. She has a Master's degree in Electrical Engineering and has designed and verified 7 chips that have gone into mass production. She is proficient in Verilog, C++, and other languages and tools used in chip design. She is currently seeking a senior hardware design engineer position and has experience working as a contractor and at various semiconductor companies.
SBC6020 SAM9G20 based Single Board Computer
The Embest SBC6020 Single Board Computer is based on the 400MHz Atmel AT91SAM9G20 ARM926EJ-STM microcontroller. It has interfaces like 7 serial ports, 2 Ethernet ports, USB, CAN, CF card slot, and ADC. It runs the Linux 2.6.30 operating system and is ready to use for embedded applications.
Arduino by yogesh t s'
1.Gives basic idea about what is arduino? and their funtionalites.
2. Applications of arduino
3. Adruino programming
4. what is Nodemcu ?
5. pindiagram of Nodemcu
Development Board for NXP i.MX 8M Quad Application Processors
The overview file introduces a versatile platform MYD-JX8MX development board for evaluating the MYC-JX8MX CPU Module. It takes full features of the i.MX 8M processor and has brought out rich peripherals through connectors and headers such as 4 x USB 3.0 Host ports and 1 x USB 3.0 Host/Device port, Gigabit Ethernet, TF card slot, USB based Mini PCIe interface for 4G LTE Module, WiFi/BT, Audio In/Out, HDMI, 2 x MIPI-CSI, MIPI-DSI, 2 x LVDS display interfaces, PCIe 3.0 (x4) NVMe SSD Interface, etc. The board is ready to run Linux and can work in extended temperature ranging from -30°C to 80°C. It is delivered with necessary cable accessories for customers to easily start development as soon as getting it out-of-box. A MIPI Camera Module MY-CAM003 is provided as an option for the board.
2nd ARM Developer Day - NXP USB Workshop
This document describes an exercise using USB in-system programming (ISP) on an LPC1343 LPCXpresso board without using host software. The key points are:
1. The LPC1343 board plugs into an NGX baseboard and the bootloader code executes on power-up or reset to either run the ISP command handler, user application, or obtain a boot image from a USB mass storage device.
2. Holding the PIO0_1 pin low during reset triggers the ISP command handler or USB device enumeration without checking for valid user code.
3. The state of the PIO0_1 pin determines whether the bootloader runs the
Embest catalog 2011
The document provides information about Embest Info & Tech Co., Ltd., including their product offerings such as development boards, solutions, and design services. Specifically, it introduces several ARM-based boards, MID solutions, HMI solutions, and custom design services. Embest focuses on embedded system technology and provides hardware and software design services covering many processors and operating systems.
An Overview on Programmable System on Chip: PSoC-5
The document provides an overview of Cypress Semiconductor's Programmable System on Chip (PSoC)-5. It describes the key features of PSoC-5 including its 32-bit ARM Cortex-M3 CPU, digital and analog subsystems, low power modes, communication peripherals, and PSoC Creator design flow. It also summarizes the features of the CY8CKIT-001 and CY8CKIT-014 kits for developing with PSoC-5.
Microcontroller kit
Microcontroller kit contains AVR Controller Board, AVR/8051 USB Programmer, 16X2 LCD, EEPROM 24C08 (IC), Temperature Sensor, F/F Jumper Wire etc.
Brochure (2016-01-30)
Andes Technology Corporation provides a product selector guide and overview of its AndesCore CPU architecture and associated products for Internet of Things (IoT) applications. The AndesCore architecture was designed specifically for the power, performance, and security needs of IoT devices, unlike architectures for PCs and smartphones. Key features of AndesCore include frequency throttling, a patented memory architecture, and custom instructions. AndesCore CPU cores range from small 2-stage pipelines to larger 8-stage pipelines and include options for security, custom instructions, and digital signal processing. Andes also offers associated platform IP and software development tools to simplify IoT product development.
Intel core i5
The document discusses the specifications and technologies of the Intel Core i5-3550S processor. It uses the Ivy Bridge microarchitecture with a 22nm process. It has 4 cores with 4 threads each, supports up to 32GB of RAM, and has cache memory including a shared 8MB L3 cache. It supports many Intel technologies like Turbo Boost, Hyper-Threading, Virtualization, and AES-NI.
Resume_A0
Michael Young is seeking an engineering position in southern California. He has over 25 years of experience in hardware and system design, including expertise in electronics, interfaces, power regulation, and PCB design. Previous roles include principal engineer at SMART Modular developing a NVDIMM product, hardware engineer at QLogic designing Fibre Channel adapters, and staff engineer at STEC designing an SSD. He has a Master's and Bachelor's in Electrical Engineering from Texas Tech University.
Linxu conj2016 96boards
The IoT is becoming extremely popular keyword in the industries while there are many different interpretations or various definitions. However, one common requirement is that it requires many Sensor devices connected to Linux devices. The user space drivers for GPIO, I2C/SPI and UART sensors in the past were implemented separately from scratch delicately for each product. This will cause significant challenge of software engineering overhead while GPIO, I2C/SPI and UART sensors are dramatically increasing which have to be supported. The IoTDK is one of the library to provide portability of sensors' driver to solve the situation.
The talk will includes guide of IoTDK and 96Boards and tutorial of programing I2C and GPIO devices. Targeted audiences are who are interested in IoT sensors or who would like to move from Arduino and Raspberry Pi to modern ARM CPU effectively.
This presentation was delivered at LinuxCon Japan 2016 by Akira Tsukamoto.
SoM with Zynq UltraScale device
The MYC-CZU3EG CPU Module is a powerful MPSoC System-on-Module (SoM) based on Xilinx Zynq UltraScale+ ZU3EG which features a 1.2 GHz quad-core ARM Cortex-A53 64-bit application processor
Asar resume
The document provides a summary of a job applicant's career experience and qualifications. It outlines their objective of seeking a senior hardware engineering role, education as an electronics and communications graduate with 5.5 years of experience in defense, aerospace and medical industries. It details technical skills in circuit design, debugging tools, and programming languages. It also lists work experience at various companies and highlights roles and responsibilities on several hardware design projects involving medical devices, processors, DSPs and networking modules.
My Profile
The document describes Shibasis Ganguly's experience and services for product development. It outlines his 17+ years of experience in embedded systems, hardware, and software development. He specializes in areas like consumer electronics, telecom, and hardware/software design. Some of the projects he has delivered include an award-winning satellite set-top box, WiFi monitor design, and high-speed switching systems. He provides consultancy and support across the entire product development cycle.
MYD-J1028X Development Board Overview
The MYD-J1028X development board consists of a MYC-J1028X CPU module containing an NXP LS1028A dual core processor and a base board providing connectivity. The board provides evaluation and prototyping capabilities for applications like industrial control and edge computing. It has features like Gigabit Ethernet, USB 3.0, and an optional camera or RS232/485 module. The board runs Linux distributions and driver source code is provided to support development on the LS1028A processor.
ARM® Cortex™ M Bootup_CMSIS_Part_3_3_Debug_Architecture
This is part 3 / 3 presentation on ARM® Cortex™ Bootup,CMSIS and debugging. In this presentation the following topics are being discussed
ARM® Cortex M debug architecture
Introduction to Debugging
Capabilities & Debug Components (Resources / Memory Map / ROM Table)
ARM® Debug Interface Architecture
CMSIS DAP
EFM®32 On board Segger J-Link debugger
Similar to Embest s3 cev40 _neomore (20)
Development Board for NXP i.MX 8M Quad Application Processors
Development Board for NXP i.MX 8M Quad Application Processors
An Overview on Programmable System on Chip: PSoC-5
An Overview on Programmable System on Chip: PSoC-5
ARM® Cortex™ M Bootup_CMSIS_Part_3_3_Debug_Architecture
ARM® Cortex™ M Bootup_CMSIS_Part_3_3_Debug_Architecture
Embest s3 cev40 _neomore
- 1. Embest S3CEV40 Evaluation Board - ARM7 Development Board based on Samsung S3C44B0 Microcontroller - 10 BaseT, USB, 2 RS232, LCD, IDE, Keyboard, Jtag,... - Boot Code, ucLinux, uCos Embest S3CEV40 evaluation board is a platform that is suitable for code development of Samsung's S3C44B0X 16/32-bit RISC microcontroller (General ARM) for hand-held device and general applications. S3C44B0X consists of 16-/32-bit RISC (ARM7TDMI) CPU core, 8KB cache, optional internal SRAM, LCD controller (up to 256 color DSTN), 2-ch UART with hand-shake (IRDA1.0,16-byte FIFO), 4-ch DMA, System manager (chip select logic, FP/ EDO/SDRAM controller), 6-ch timers with PWM, 71bit general purpose I/O ports, RTC, 8-ch 10-bit ADC, IIC-BUS interface, IIS-BUS interface, Sync. SIO interface and PLL for clock. The S3CEV40 board consists of S3C44B0x processor, boot Flash, SDRAM, LCD&TSP touch screen interface, two serial communication ports, ethernet interface, USB interface, keyboard interface, IIS(sound) interface, exterior IDE port, Nand Flash, RTC, JTAG interface and 8-SEG. Embest S3CEV40 EVB provide a high performance and low cost solution for embedded engineers. Hardware Specification • • • • • • • • • • • • • • • • • • • • • Dimensions: 190 x 190 mm(main board) S3C44B0 processor, ARM7TDMI core, 66MHz work frequency 5.0V DC or USB power supply 2 M bytes 16-bit Flash 8 M bytes 16-bit SDRAM 4K bit EEPROM with IIC BUS 2x RS232 USB connecter 10M Ethernet interface connector microphone import IIS audio frequency export (speaker out) 16 M Bytes Nand Flash external IDE port LCD&TSP touch screen port 320×240 LCD * (optional) 4×4 keyboard * (optional) Reset button 2 interrupt buttons and 2 LEDS 8 segment leds 20-pin JTAG interface connector 4 groups 2×20 PIN expansion connectors of CPU Embest Info&Tech Co., Ltd. Copyright © 2000-2010, All rights reserved.
- 2. Software Specification • • • • Boot software Samples codes and test software(All in source code) o learning example for arm assemble instructions o learning example for running arm processor in different operating mode o learning example for arm thumb instructions o learning example on how to operate with interrupt o IIS sounds test program o Test porgram for 8_segment Led, to light as 1,2,3,... o Test program for using RTC o Test program on how to access memory o Test program to lighting LED, showing how to use GPIO o Test Program for reading/writing flash chip o Test program about Timer o Test program about UART o Test program for keyboard operation o Test program for LCD display, both showing text and graphics o Test porgram on how to use touch screen o A network application to test Ethernet port o DHCP protocol test program o ... ... uCos BSP (uC/OS-II needs to be licensed if used commercially, please contact Micrium) uClinux source tree(porting for this board) Packing List • • • • • Embest S3CEV40 Evaluation Board a DB9 plug-to-DB9 socket straight-through serial cable 5.0V DC Power supply USB cable CD-ROM, include: - user manual - circuit schematic drawing - Boot software - samples code and test software - uCos BSP (uC/OS-II needs to be licensed if used commercially, please contact Micrium) - uClinux source tree This S3C44b0X development board is capable of supporting different kinds of debugging systems, using an ICE interface. EmbestUniversity® Embest provides an educational package based on S3CEV40 evaluation board including addtionally development tools, example codes and teaching material. Embest Info&Tech Co., Ltd. Copyright © 2000-2010, All rights reserved.
- 3. Order Information Order NO. E2 Item Embest S3CEV40 Evaluation Board Kit Description You can buy Embest S3CEV40 EVB with LCD & 4*4keypad or not Screen Opt. Order No. E1 E2 (with 320*240 Mono LCD & 4*4 keypad ) (without 320*240 Mono LCD & 4*4 keypad ) E1-KIT = e1 + Dev. Tool Suite Development tools * Embst IDE for ARM tool suite - UNetICE in-circuit emulator - A 20-pin Jtag interface cable - A USB cable Development - An Ethernet cable Kit for - 6V power supply S3CEV40 * 1 Embest IDE license * 1 Flash Programmer license Development board * Embest S3CEV40 Evaluation Board Kit (E1 with LCD & Keypad) Room 509, Luohu Science&Technology Building, #85 Taining Road, Shenzhen, Guangdong, China(518020) Tel: +86-755-25635656 Fax: +86-755-25616057 http://www.armkits.com http://www.embedinfo.com Embest Info&Tech Co., Ltd. Copyright © 2000-2010, All rights reserved.