Electrophoresis questions
•
0 likes•46 views
This document contains questions about electrophoresis techniques. It asks about factors affecting molecular velocity during electrophoresis, limitations and errors, isoelectric focusing, the importance of buffers and their effect on velocity, three types of electrophoresis, types of power supplies and their effect on migration rate, and methods for quantifying separated molecules.
Report
Share
Report
Share
Download to read offline
Recommended
Final Abstract
This study investigated the relationship between ionic transport and lithium bis(trifluoromethane) sulfonamide (Li-TFSI) concentration in a copolymer matrix of vinylene carbonate and diethylene glycol methyl ether methacrylate. Analysis of conductivity data using Random Barrier and Macdonald-Trukhan models revealed that transport coefficients deviate from ideal mixing behavior and reach limiting values at a specific optimal charge density. Increasing ion concentration beyond this value may hinder highly conductive polymer electrolyte synthesis.
Mole CONCEPT
This document discusses molecules, atoms, and the mole concept in chemistry. It defines molecules as combinations of two or more atoms, and describes molecules of elements and compounds. Molecules can be diatomic, triatomic, tetra-atomic, or poly-atomic depending on the number and type of atoms combined. The mole concept is introduced as a convenient way to represent large numbers of particles collectively. One mole equals Avogadro's number of particles, and conveys information about number, mass, and volume.
Atom
This document discusses atoms and their properties. It defines an atom as the smallest particle of matter that can participate in a chemical reaction. Atoms have a specific atomic radius and symbol. The atomic mass of an element is its relative mass compared to carbon-12 and is expressed in atomic mass units. Several elements and their atomic masses are listed as examples.
Tocci chapter 13 applications of programmable logic devices extended
The document discusses the family tree of digital systems, including standard logic, ASICs, microprocessors, DSPs, and different types of programmable logic devices like PLDs, CPLDs, and FPGAs. It covers the architectures of early PLDs like PROM, PAL, and FPLA, which have programmable AND and OR gates, as well as the different programming technologies for modern PLDs like SRAM, flash memory, EPROM, and antifuse.
Tocci chapter 12 memory devices
The document discusses various types of memory devices and technologies. It covers topics like memory terminology, ROM, EPROM, EEPROM, and flash memory. Key points include that ROM is read-only memory that can be mask-programmed or one-time programmable, while EPROM, EEPROM and flash memory use floating-gate MOS transistors and can be electrically erased and reprogrammed in bulk or individually.
Tocci ch 9 msi logic circuits
This document covers MSI (medium-scale integration) logic circuits. It discusses decoders, multiplexers, encoders, and other digital logic components. Decoders take binary inputs and activate one of multiple outputs. Multiplexers select one of several inputs to output based on a digital select code. Encoders convert coded inputs to binary outputs. The document provides circuit diagrams and explanations of common MSI components like decoders, multiplexers, priority encoders, and code converters. It also discusses applications such as seven-segment displays, LCDs, and digital systems.
Tocci ch 7 counters and registers modified x
This document discusses various types of counters and registers, including asynchronous (ripple) counters, synchronous (parallel) counters, decade counters, BCD counters, shift registers, ring counters, and Johnson counters. It provides details on their structure, operation, and applications. Key topics covered include propagation delay in ripple counters, the advantages of synchronous counters, designing counters with different mod numbers, decoding counter states, and using counters for functions like stepper motor control.
Tocci ch 6 digital arithmetic operations and circuits
The document discusses digital arithmetic operations and circuits, including binary addition, representing signed numbers, addition and subtraction in the two's complement system, multiplication and division of binary numbers, BCD addition, hexadecimal arithmetic, and arithmetic circuits. It describes how an ALU performs arithmetic operations by accepting data from memory and executing instructions from the control unit, using adders, registers, and control signals to perform addition and subtraction.
Recommended
Final Abstract
This study investigated the relationship between ionic transport and lithium bis(trifluoromethane) sulfonamide (Li-TFSI) concentration in a copolymer matrix of vinylene carbonate and diethylene glycol methyl ether methacrylate. Analysis of conductivity data using Random Barrier and Macdonald-Trukhan models revealed that transport coefficients deviate from ideal mixing behavior and reach limiting values at a specific optimal charge density. Increasing ion concentration beyond this value may hinder highly conductive polymer electrolyte synthesis.
Mole CONCEPT
This document discusses molecules, atoms, and the mole concept in chemistry. It defines molecules as combinations of two or more atoms, and describes molecules of elements and compounds. Molecules can be diatomic, triatomic, tetra-atomic, or poly-atomic depending on the number and type of atoms combined. The mole concept is introduced as a convenient way to represent large numbers of particles collectively. One mole equals Avogadro's number of particles, and conveys information about number, mass, and volume.
Atom
This document discusses atoms and their properties. It defines an atom as the smallest particle of matter that can participate in a chemical reaction. Atoms have a specific atomic radius and symbol. The atomic mass of an element is its relative mass compared to carbon-12 and is expressed in atomic mass units. Several elements and their atomic masses are listed as examples.
Tocci chapter 13 applications of programmable logic devices extended
The document discusses the family tree of digital systems, including standard logic, ASICs, microprocessors, DSPs, and different types of programmable logic devices like PLDs, CPLDs, and FPGAs. It covers the architectures of early PLDs like PROM, PAL, and FPLA, which have programmable AND and OR gates, as well as the different programming technologies for modern PLDs like SRAM, flash memory, EPROM, and antifuse.
Tocci chapter 12 memory devices
The document discusses various types of memory devices and technologies. It covers topics like memory terminology, ROM, EPROM, EEPROM, and flash memory. Key points include that ROM is read-only memory that can be mask-programmed or one-time programmable, while EPROM, EEPROM and flash memory use floating-gate MOS transistors and can be electrically erased and reprogrammed in bulk or individually.
Tocci ch 9 msi logic circuits
This document covers MSI (medium-scale integration) logic circuits. It discusses decoders, multiplexers, encoders, and other digital logic components. Decoders take binary inputs and activate one of multiple outputs. Multiplexers select one of several inputs to output based on a digital select code. Encoders convert coded inputs to binary outputs. The document provides circuit diagrams and explanations of common MSI components like decoders, multiplexers, priority encoders, and code converters. It also discusses applications such as seven-segment displays, LCDs, and digital systems.
Tocci ch 7 counters and registers modified x
This document discusses various types of counters and registers, including asynchronous (ripple) counters, synchronous (parallel) counters, decade counters, BCD counters, shift registers, ring counters, and Johnson counters. It provides details on their structure, operation, and applications. Key topics covered include propagation delay in ripple counters, the advantages of synchronous counters, designing counters with different mod numbers, decoding counter states, and using counters for functions like stepper motor control.
Tocci ch 6 digital arithmetic operations and circuits
The document discusses digital arithmetic operations and circuits, including binary addition, representing signed numbers, addition and subtraction in the two's complement system, multiplication and division of binary numbers, BCD addition, hexadecimal arithmetic, and arithmetic circuits. It describes how an ALU performs arithmetic operations by accepting data from memory and executing instructions from the control unit, using adders, registers, and control signals to perform addition and subtraction.
Tocci ch 3 5 boolean algebra, logic gates, combinational circuits, f fs, - re...
This document contains lecture slides on logic gates and Boolean algebra. It covers topics like De Morgan's theorem, sum of products and product of sums, logic gate representations including NAND and NOR gates, flip flops including JK and D flip flops. Circuit diagrams and truth tables are provided for latching circuits and different types of flip flops. The document is copyrighted and appears to be from a course on logic gates and Boolean algebra taught by Muhammad A M Islam.
A15 sedra ch 15 memory circuits
The document discusses latches and flip-flops, basic memory circuits. It describes the latch, SR flip-flop, CMOS enabled SR flip-flop, and CMOS SRAM memory cell. It also discusses a one-transistor dynamic RAM cell. The document focuses on the circuit designs and operations of various basic memory components.
A14 sedra ch 14 advanced mos and bipolar logic circuits
This document discusses advanced logic circuits including pseudo-NMOS logic, pass-transistor logic, dynamic MOS logic, emitter-coupled logic (ECL), and BiCMOS digital circuits. Pseudo-NMOS logic uses one transistor per input instead of two to reduce area and delay. Pass-transistor logic builds logic functions using NMOS or transmission gate switches. Dynamic MOS logic uses precharge and evaluate phases to reduce static power at the cost of increased sensitivity to noise. ECL uses differential pairs for noise immunity and constant current sources. BiCMOS combines CMOS and BJTs to achieve high performance with lower power than ECL.
A13 sedra ch 13 cmos digital logic circuits
This document discusses CMOS digital logic circuits. It covers special characteristics like fan-out, power dissipation, and propagation delay. It then describes the basic CMOS inverter circuit. The inverter uses complementary NMOS and PMOS transistors for the pull-down and pull-up networks. When the input is low, the NMOS transistor is on and the PMOS is off, pulling the output high. When the input is high, the opposite occurs. This allows the output to switch between 0V and the supply voltage with very low static power dissipation.
A09 sedra ch 9 frequency response
The document discusses the high-frequency response of common-emitter (CE) amplifiers. It first examines the CE amplifier circuit and its mid-band behavior when the capacitors are short circuits. It then explores how each internal capacitor (CB, CC, CE) affects the frequency response as it blocks signal flow at lower frequencies. The document also considers the Miller effect, which multiplies the input capacitance seen at the base due to feedback through the amplifier. Overall, the internal capacitances lower the amplifier's bandwidth as frequency decreases.
5 sedra ch 05 mosfet.ppsx
This document describes the structure and operation of MOS field-effect transistors (MOSFETs). It covers topics such as device structure, current-voltage characteristics, MOSFET circuits at DC, and large-signal equivalent circuit models. Examples are provided to illustrate how to analyze MOSFET circuits and calculate current and voltage values. The document also discusses the physical mechanisms involved in MOSFET operation such as creation of a channel for current flow and derivation of current-voltage relationships.
5 sedra ch 05 mosfet
This document discusses MOS field-effect transistors (MOSFETs) and includes the following topics:
1. It outlines the structure and operation of MOSFET devices, including creating a channel for current flow and deriving the iD-vDS relationship.
2. It covers current-voltage characteristics of MOSFETs such as the iD-vDS, iD-vGS curves and their different operating regions.
3. It provides examples of solving for unknown variables in MOSFET circuits operating in different regions, such as the triode and saturation regions.
5 sedra ch 05 mosfet revision
This document discusses MOS field-effect transistors (MOSFETs) and their operation. It covers MOSFET device structure and physical operation, current-voltage characteristics, MOSFET circuits at DC, applying MOSFETs in amplifier design, small signal operations and models, and other related topics. The document contains diagrams and equations to illustrate MOSFET characteristics and circuit analysis. It provides an overview of the key concepts and applications of MOSFET devices.
Fields Lec 2
This document discusses coordinate systems and vector calculus concepts needed for electromagnetic field theory. It introduces Cartesian, cylindrical, and spherical coordinate systems. It explains that vector integration requires defining appropriate differential elements (length, area, volume) that vary based on the coordinate system. It also introduces concepts of gradient, divergence, and curl - vector operators used to take derivatives of vector fields. The gradient represents the maximum rate of change, divergence measures flux, and curl represents rotational nature. Expressions for these operators are given in the three coordinate systems.
Fields Lec 1
The document discusses the interaction of electromagnetic fields (EMFs) with biological systems. It notes that the topic is studied to assess potential health hazards, enable applications in biology and medicine, and optimize the design of EM devices. The document outlines various effects of EMF exposure at different frequencies, therapeutic and diagnostic EMF applications, and the need to model human exposure and effects through governing equations and human body models. Key areas covered include dosimetry, various human body models, RF applications like keyless entry and MRI, hyperthermia modeling, and diagnostic applications such as endoscopic capsules.
Fields Lec 5&6
1. The document discusses various electromagnetic boundary conditions including:
- Electric and magnetic field boundary conditions between dielectric-dielectric interfaces where the normal component of B and tangential component of E are continuous.
- Conductor-dielectric boundary conditions where the surface charge density is related to the normal electric field component.
2. Faraday's law relates the rate of change of magnetic flux through a loop to the induced electromotive force around the loop. Lenz's law states that the induced current will flow such that it creates a magnetic field opposing the original change in flux.
3. The plane wave solution for electromagnetic waves in free space represents the electric and magnetic fields as propagating sinusoidal functions of space and time with
Fields Lec 4
Electrical stimulation can be used for many applications including vision restoration, epilepsy control, tremor control, cardiac pacing, and more. Magnetic fields are generated by moving electric charges. The Biot-Savart law describes the magnetic field generated by a current element, while Ampere's law relates the magnetic field to the current passing through a closed loop. Materials respond differently to magnetic fields based on properties like diamagnetism, paramagnetism, and ferromagnetism. Ferromagnetic materials have domains that can align with an external magnetic field, allowing the material to retain magnetization.
Fields Lec 3
Here are some examples of FDA-approved therapeutic devices that use direct current (DC) electric fields:
- Bone growth stimulators - Use pulsed electromagnetic fields or capacitively coupled electric fields to promote bone healing of fractures that are not healing on their own.
- Transcutaneous electrical nerve stimulators (TENS) - Apply electric currents to stimulate nerves for pain relief and muscle rehabilitation.
- Iontophoresis devices - Use low-level electrical currents to drive ionized drug molecules through the skin for local drug delivery.
- Cardioversion/defibrillation devices - Apply controlled electric shocks to the heart to treat irregular heart rhythms like atrial fibrillation or ventricular fibrillation.
Lecture 2 (system overview of c8051 f020) rv01
The document provides an overview of the Silicon Labs C8051F020 microcontroller. It describes the microcontroller's CPU, memory organization, I/O ports, analog and digital peripherals such as ADCs, DACs, and comparators. It also discusses the microcontroller's special function registers used to control and interface with its various peripherals.
Lecture 1 (course overview and 8051 architecture) rv01
This document provides an overview and syllabus for a course on the 8051 microcontroller architecture. The course covers the 8051 architecture, instruction set, programming using assembly and C languages, peripherals, interrupts, timers, serial communication, analog-to-digital converters, and more. The goals are for students to understand the 8051 architecture, develop skills in programming 8051 microcontrollers using different languages, and interface the microcontroller to external components. The course consists of lectures, tutorials, and labs using the Silicon Labs C8051F020 development board.
Lecture 12 (adc) rv01
The document discusses analog to digital converters (ADCs). It describes what an ADC is and how it converts an analog input voltage to a digital output code. It then discusses specifics of the 12-bit ADC0 on the C8051F020 microcontroller, including its input range, output coding, configuration registers, starting conversions, and programming. It provides examples of setting the SAR0 clock frequency, PGA gain, multiplexer channel, and enabling ADC0 to take conversions.
Lecture 11 (dac and comparator) rv01
The document discusses digital-to-analog converters (DACs) and analog comparators. It describes the 12-bit DACs and analog comparators available on the C8051F020 microcontroller. It explains how the DACs can be programmed to output analog voltages through control registers. It also details how the analog comparators work, including their functional block diagram, hysteresis characteristics, and interrupt capabilities.
Lecture 10 (serial communication)
This document provides an overview of serial communication and UART operation. It discusses asynchronous and synchronous serial communication, UART block diagrams, clock requirements, programming UARTs, operation modes, baud rate calculations using timers 1 and 2, and initializing UART0 using timers 1 and 2 to generate baud rates. Equations are provided to calculate the reload values for timers 1 and 2 to generate a desired baud rate given the system clock frequency. Code examples initialize UART0 for 115200 baud communication using timer 1 or timer 2 clock sources.
Lecture 5 (system clock crossbar and gpio) rv012
The document discusses the system clock, watchdog timer, port pins, and crossbar for the C8051F020 microcontroller. It describes initializing the system clock from the internal or external oscillator, configuring the watchdog timer interval and disabling it. It also covers configuring port pin output modes as open-drain or push-pull and digital inputs. Finally, it explains the crossbar's pin assignment priority and registers for configuration.
Lecture 4 (8051 instruction set) rv01
The document summarizes the instruction set of the 8051 microcontroller. It describes the different addressing modes including register, direct, indirect, immediate, relative, absolute, long and indexed addressing. It also explains the various instruction types such as arithmetic, logical, data transfer, boolean and program branching instructions. Examples are provided for different instructions like ADD, MOV, JMP etc. to illustrate how they work and affect processor registers.
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
More Related Content
More from cairo university
Tocci ch 3 5 boolean algebra, logic gates, combinational circuits, f fs, - re...
This document contains lecture slides on logic gates and Boolean algebra. It covers topics like De Morgan's theorem, sum of products and product of sums, logic gate representations including NAND and NOR gates, flip flops including JK and D flip flops. Circuit diagrams and truth tables are provided for latching circuits and different types of flip flops. The document is copyrighted and appears to be from a course on logic gates and Boolean algebra taught by Muhammad A M Islam.
A15 sedra ch 15 memory circuits
The document discusses latches and flip-flops, basic memory circuits. It describes the latch, SR flip-flop, CMOS enabled SR flip-flop, and CMOS SRAM memory cell. It also discusses a one-transistor dynamic RAM cell. The document focuses on the circuit designs and operations of various basic memory components.
A14 sedra ch 14 advanced mos and bipolar logic circuits
This document discusses advanced logic circuits including pseudo-NMOS logic, pass-transistor logic, dynamic MOS logic, emitter-coupled logic (ECL), and BiCMOS digital circuits. Pseudo-NMOS logic uses one transistor per input instead of two to reduce area and delay. Pass-transistor logic builds logic functions using NMOS or transmission gate switches. Dynamic MOS logic uses precharge and evaluate phases to reduce static power at the cost of increased sensitivity to noise. ECL uses differential pairs for noise immunity and constant current sources. BiCMOS combines CMOS and BJTs to achieve high performance with lower power than ECL.
A13 sedra ch 13 cmos digital logic circuits
This document discusses CMOS digital logic circuits. It covers special characteristics like fan-out, power dissipation, and propagation delay. It then describes the basic CMOS inverter circuit. The inverter uses complementary NMOS and PMOS transistors for the pull-down and pull-up networks. When the input is low, the NMOS transistor is on and the PMOS is off, pulling the output high. When the input is high, the opposite occurs. This allows the output to switch between 0V and the supply voltage with very low static power dissipation.
A09 sedra ch 9 frequency response
The document discusses the high-frequency response of common-emitter (CE) amplifiers. It first examines the CE amplifier circuit and its mid-band behavior when the capacitors are short circuits. It then explores how each internal capacitor (CB, CC, CE) affects the frequency response as it blocks signal flow at lower frequencies. The document also considers the Miller effect, which multiplies the input capacitance seen at the base due to feedback through the amplifier. Overall, the internal capacitances lower the amplifier's bandwidth as frequency decreases.
5 sedra ch 05 mosfet.ppsx
This document describes the structure and operation of MOS field-effect transistors (MOSFETs). It covers topics such as device structure, current-voltage characteristics, MOSFET circuits at DC, and large-signal equivalent circuit models. Examples are provided to illustrate how to analyze MOSFET circuits and calculate current and voltage values. The document also discusses the physical mechanisms involved in MOSFET operation such as creation of a channel for current flow and derivation of current-voltage relationships.
5 sedra ch 05 mosfet
This document discusses MOS field-effect transistors (MOSFETs) and includes the following topics:
1. It outlines the structure and operation of MOSFET devices, including creating a channel for current flow and deriving the iD-vDS relationship.
2. It covers current-voltage characteristics of MOSFETs such as the iD-vDS, iD-vGS curves and their different operating regions.
3. It provides examples of solving for unknown variables in MOSFET circuits operating in different regions, such as the triode and saturation regions.
5 sedra ch 05 mosfet revision
This document discusses MOS field-effect transistors (MOSFETs) and their operation. It covers MOSFET device structure and physical operation, current-voltage characteristics, MOSFET circuits at DC, applying MOSFETs in amplifier design, small signal operations and models, and other related topics. The document contains diagrams and equations to illustrate MOSFET characteristics and circuit analysis. It provides an overview of the key concepts and applications of MOSFET devices.
Fields Lec 2
This document discusses coordinate systems and vector calculus concepts needed for electromagnetic field theory. It introduces Cartesian, cylindrical, and spherical coordinate systems. It explains that vector integration requires defining appropriate differential elements (length, area, volume) that vary based on the coordinate system. It also introduces concepts of gradient, divergence, and curl - vector operators used to take derivatives of vector fields. The gradient represents the maximum rate of change, divergence measures flux, and curl represents rotational nature. Expressions for these operators are given in the three coordinate systems.
Fields Lec 1
The document discusses the interaction of electromagnetic fields (EMFs) with biological systems. It notes that the topic is studied to assess potential health hazards, enable applications in biology and medicine, and optimize the design of EM devices. The document outlines various effects of EMF exposure at different frequencies, therapeutic and diagnostic EMF applications, and the need to model human exposure and effects through governing equations and human body models. Key areas covered include dosimetry, various human body models, RF applications like keyless entry and MRI, hyperthermia modeling, and diagnostic applications such as endoscopic capsules.
Fields Lec 5&6
1. The document discusses various electromagnetic boundary conditions including:
- Electric and magnetic field boundary conditions between dielectric-dielectric interfaces where the normal component of B and tangential component of E are continuous.
- Conductor-dielectric boundary conditions where the surface charge density is related to the normal electric field component.
2. Faraday's law relates the rate of change of magnetic flux through a loop to the induced electromotive force around the loop. Lenz's law states that the induced current will flow such that it creates a magnetic field opposing the original change in flux.
3. The plane wave solution for electromagnetic waves in free space represents the electric and magnetic fields as propagating sinusoidal functions of space and time with
Fields Lec 4
Electrical stimulation can be used for many applications including vision restoration, epilepsy control, tremor control, cardiac pacing, and more. Magnetic fields are generated by moving electric charges. The Biot-Savart law describes the magnetic field generated by a current element, while Ampere's law relates the magnetic field to the current passing through a closed loop. Materials respond differently to magnetic fields based on properties like diamagnetism, paramagnetism, and ferromagnetism. Ferromagnetic materials have domains that can align with an external magnetic field, allowing the material to retain magnetization.
Fields Lec 3
Here are some examples of FDA-approved therapeutic devices that use direct current (DC) electric fields:
- Bone growth stimulators - Use pulsed electromagnetic fields or capacitively coupled electric fields to promote bone healing of fractures that are not healing on their own.
- Transcutaneous electrical nerve stimulators (TENS) - Apply electric currents to stimulate nerves for pain relief and muscle rehabilitation.
- Iontophoresis devices - Use low-level electrical currents to drive ionized drug molecules through the skin for local drug delivery.
- Cardioversion/defibrillation devices - Apply controlled electric shocks to the heart to treat irregular heart rhythms like atrial fibrillation or ventricular fibrillation.
Lecture 2 (system overview of c8051 f020) rv01
The document provides an overview of the Silicon Labs C8051F020 microcontroller. It describes the microcontroller's CPU, memory organization, I/O ports, analog and digital peripherals such as ADCs, DACs, and comparators. It also discusses the microcontroller's special function registers used to control and interface with its various peripherals.
Lecture 1 (course overview and 8051 architecture) rv01
This document provides an overview and syllabus for a course on the 8051 microcontroller architecture. The course covers the 8051 architecture, instruction set, programming using assembly and C languages, peripherals, interrupts, timers, serial communication, analog-to-digital converters, and more. The goals are for students to understand the 8051 architecture, develop skills in programming 8051 microcontrollers using different languages, and interface the microcontroller to external components. The course consists of lectures, tutorials, and labs using the Silicon Labs C8051F020 development board.
Lecture 12 (adc) rv01
The document discusses analog to digital converters (ADCs). It describes what an ADC is and how it converts an analog input voltage to a digital output code. It then discusses specifics of the 12-bit ADC0 on the C8051F020 microcontroller, including its input range, output coding, configuration registers, starting conversions, and programming. It provides examples of setting the SAR0 clock frequency, PGA gain, multiplexer channel, and enabling ADC0 to take conversions.
Lecture 11 (dac and comparator) rv01
The document discusses digital-to-analog converters (DACs) and analog comparators. It describes the 12-bit DACs and analog comparators available on the C8051F020 microcontroller. It explains how the DACs can be programmed to output analog voltages through control registers. It also details how the analog comparators work, including their functional block diagram, hysteresis characteristics, and interrupt capabilities.
Lecture 10 (serial communication)
This document provides an overview of serial communication and UART operation. It discusses asynchronous and synchronous serial communication, UART block diagrams, clock requirements, programming UARTs, operation modes, baud rate calculations using timers 1 and 2, and initializing UART0 using timers 1 and 2 to generate baud rates. Equations are provided to calculate the reload values for timers 1 and 2 to generate a desired baud rate given the system clock frequency. Code examples initialize UART0 for 115200 baud communication using timer 1 or timer 2 clock sources.
Lecture 5 (system clock crossbar and gpio) rv012
The document discusses the system clock, watchdog timer, port pins, and crossbar for the C8051F020 microcontroller. It describes initializing the system clock from the internal or external oscillator, configuring the watchdog timer interval and disabling it. It also covers configuring port pin output modes as open-drain or push-pull and digital inputs. Finally, it explains the crossbar's pin assignment priority and registers for configuration.
Lecture 4 (8051 instruction set) rv01
The document summarizes the instruction set of the 8051 microcontroller. It describes the different addressing modes including register, direct, indirect, immediate, relative, absolute, long and indexed addressing. It also explains the various instruction types such as arithmetic, logical, data transfer, boolean and program branching instructions. Examples are provided for different instructions like ADD, MOV, JMP etc. to illustrate how they work and affect processor registers.
More from cairo university (20)
Tocci ch 3 5 boolean algebra, logic gates, combinational circuits, f fs, - re...
Tocci ch 3 5 boolean algebra, logic gates, combinational circuits, f fs, - re...
A14 sedra ch 14 advanced mos and bipolar logic circuits
A14 sedra ch 14 advanced mos and bipolar logic circuits
Lecture 1 (course overview and 8051 architecture) rv01
Lecture 1 (course overview and 8051 architecture) rv01
Recently uploaded
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
Recycled Concrete Aggregate in Construction Part II
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Literature Review Basics and Understanding Reference Management.pptx
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology towards Sustainable Steelmaking
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
New techniques for characterising damage in rock slopes.pdf
rock mass characterization and New techniques for characterising damage in rock slopes
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
Casting-Defect-inSlab continuous casting.pdf
Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting
Recently uploaded (20)
Recycled Concrete Aggregate in Construction Part II
Recycled Concrete Aggregate in Construction Part II
Literature Review Basics and Understanding Reference Management.pptx
Literature Review Basics and Understanding Reference Management.pptx
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Engineering Drawings Lecture Detail Drawings 2014.pdf
Engineering Drawings Lecture Detail Drawings 2014.pdf
New techniques for characterising damage in rock slopes.pdf
New techniques for characterising damage in rock slopes.pdf
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
Electrophoresis questions
- 1. Electrophoresis Questions 1. Discuss the factors affecting the velocity of migration of molecules in an electric field. 2. Discuss limitations and errors in routine electrophoresis. 3. Give an account of isoelectric focusing. 4. Discuss the importance of buffers in electrophorsis and its effect on the velocity of migration of molecules in an electric field. 5. Give an account on three types of electrophoresis. 6. Give an account of the types of power supply that can be used in electrophoresis, which one gives a relatively constant rate of migration of molecules? 7. Give an account of the methods of quantitation of the separated molecules in electrophoresis.