TripleHard - Trivalent Based Hard Chrome - Case TecnocromSavroc Ltd
A case example of integration of TripleHard trivalent based hard chromium coating technology into Tecnocrom Industrial's existing electroless nickel plating line. TripleHard allows cost-efficient manufacturing of hard and wear-resistant coatings for demanding conditions without the carcinogenic chromic acid used in traditional hexavalent based hard chromium.
Read more information and contact Savroc to get a license to use TripleHard method at: www.savroc.com
Owens Corning presentation by Geoffrey Wilson at JEC Europe 2014 on new innovative solutions for the global building and construction industry through glass non-wovens
The transportation market represents a very large segment where light-weighting composite solutions are progressing in mass transit and automotive applications. Inevitably, the main drivers are the reduction of fuel consumption and the need to lower CO2 emissions. In addition, OEMs and automakers are looking for enhanced parts performance and durability, better acoustics and production efficiency gains.
On the transportation market, Owens Corning offers solutions for redefined surface appearance or weight reduction without sacrificing performance, while meeting the strict regulatory constraints on fuel consumption and carbon emissions. Owens Corning innovation is backed by state-of-the-art modeling and testing capabilities.
TripleHard - Trivalent Based Hard Chrome - Case TecnocromSavroc Ltd
A case example of integration of TripleHard trivalent based hard chromium coating technology into Tecnocrom Industrial's existing electroless nickel plating line. TripleHard allows cost-efficient manufacturing of hard and wear-resistant coatings for demanding conditions without the carcinogenic chromic acid used in traditional hexavalent based hard chromium.
Read more information and contact Savroc to get a license to use TripleHard method at: www.savroc.com
Owens Corning presentation by Geoffrey Wilson at JEC Europe 2014 on new innovative solutions for the global building and construction industry through glass non-wovens
The transportation market represents a very large segment where light-weighting composite solutions are progressing in mass transit and automotive applications. Inevitably, the main drivers are the reduction of fuel consumption and the need to lower CO2 emissions. In addition, OEMs and automakers are looking for enhanced parts performance and durability, better acoustics and production efficiency gains.
On the transportation market, Owens Corning offers solutions for redefined surface appearance or weight reduction without sacrificing performance, while meeting the strict regulatory constraints on fuel consumption and carbon emissions. Owens Corning innovation is backed by state-of-the-art modeling and testing capabilities.
This presentation will cover the Composite Market growth trends and Owens Corning glass fiber product developments for end-user productivity and product performance improvements. The presentation includes Owens Corning product developments around sizing chemistry, product property and glass chemistry innovations that deliver a range of product solutions in key glass fiber market segments including wind energy, automotive, construction and industrial applications.
Presentation by Dr. Chris Skinner @JEC Europe 2014 on market trends for wind energy and Owens Corning integrated glass solutions to reduce the cost of wind energy for blade producers.
Colourtech has carved a niche for Pigments Products for the entire spectrum of Composite Industry and specializes in offering Polyester, Epoxy Pigments, Catalyst and Accelerators. Our products are recommended for a wide range of critical applications and industries such as construction, automotive, marine, and aerospace, electronics, petrochemical, industrial, recreational and consumer industries
Presentation by Corey Melvin of Owens Corning at CAMX on October 16, 2014. He discusses double digit growth in the use of Long Fiber Thermoplastics (LFT) due to the automotive and transportation markets, where light weighting and improved aerodynamics delivers improved fuel efficiency, reduced CO2 emissions and an increase in commercial payload capacity. The focus is on advantages of LFT and market opportunities for continued growth.
Presentation by David Hartman, Senior Technical Staff, Owens Corning at CAMX on October 15, 2014. Advances in reinforcement materials, specifically glass fiber materials, should not go unnoticed. In this presentation discover new advances in glass fiber technology areas, applications to various markets and the needs of those markets, as well as current advances in fiber reinforcement materials and forms.
Presentation by Hans Van der Steen, Owens Corning, Global Business Development Leader, Structural Composites, at CAMX on October 16, 2014. Sheet molded compounds (SMC) allow the automotive industry to make large and complex parts at affordable cost, while meeting the specific requirements for structural applications in automobiles. This presentation reviews the performance of glass fiber multi-end rovings in epoxy resin systems and highlights the specific benefits this solution brings to the automotive industry.
Constellium - The life-cycle of aluminiumConstellium
Aluminium is valuable at every stage of its life-cycle and can be endlessly recycled without loss of properties. “Going full circle – The life-cycle of aluminium” is the title of the new publication where Constellium presents three essentials to make infinite recycling a reality.
Constellium believes that players, within and outside the aluminium industry, through better collaboration can foster good practices to ensure the highest possible value is delivered at every step of the value chain.
Electroplating, Phosphating, Powder Coating and Metal Finishing Ajjay Kumar Gupta
Electroplating, Phosphating, Powder Coating and Metal Finishing (Electroplating Plant, Copper Plating, Electroforming, Brass Plating, Silver Plating, Tin-Nickel Alloy Plating, Gold Plating (Gilding), Cadmium Plating, Zinc Plating)
Electroplating is a process that uses electric current to reduce dissolved metal cations so that they form a thin coherent metal coating on an electrode. The term is also used for electrical oxidation of anions onto a solid substrate, as in the formation silver chloride on silver wire to make silver/silver-chloride electrodes. Electroplating is primarily used to change the surface properties of an object (e.g. abrasion and wear resistance, corrosion protection, lubricity, aesthetic qualities, etc.), but may also be used to build up thickness on undersized parts or to form objects by electroforming.
See more
https://goo.gl/bKk1XU
https://goo.gl/5QasBV
https://goo.gl/sBmyLI
Contact us:
Niir Project Consultancy Services
106-E, Kamla Nagar, Opp. Spark Mall,
New Delhi-110007, India.
Email: npcs.ei@gmail.com , info@entrepreneurindia.co
Tel: +91-11-23843955, 23845654, 23845886, 8800733955
Mobile: +91-9811043595
Website: www.entrepreneurindia.co , www.niir.org
Tags
Electroplating Plant, Automatic Equipment, Surface Coatings and Treatments, Electroplating and Coating Plants, Electroplating Plant Equipment, Powder Coating Plants, Powder Coating Equipments, How to Start Powder Coating Business, Powder Coating Business Plan, Business Plan on Powder Coating, Start Powder Coating Business, Start High Profit Powder Coating Business, Starting Metal Polishing Business, Electroplating Business, Gold Plating Business, How to Start Metal Plating Business, Starting Zinc Plating Business, How to Start Electroplating Business, How to Start Metal Finishing Business, Starting Metal Polishing Business, Metal Finishing Industry, Business Plans for Metal Finishing, Zinc Plating Process, Zinc Plating Plant, Electroplating Plant for Acid Zinc, Electroplating Plant Equipment, Fixed Sequence Automatic Plating Plant, Trojan and Gem Type Automatic Plant, Vulcan Lattice Arm Type Automatic Plant, Titan Type Automatic Plant, Digit Pivoted Arm Type Automatic Plant, Straight-Through Type Automatic Plant, Methods of Transporter Control, Microprocessor and Computer Control, Semi-Automatic Plating Plant, Barrel Planting Plant, Suitability of Articles for Barrel Plating, Glydo/Glydette Barrel Plating Equipment, Calculation of Work Loads, Manual Planting Plant, Single Station Barrel Plating Units, Modular Plant and Specialised Equipment for Electronics Industry, Electroplating Equipment, Welded Steel Tanks, Plastic Tanks Reinforced with Glass Fibre, Tank Lining Materials, Glass Fibre (GRP) Tanks, Treatment of Rubber Linings, Ilex Grade Plastic Lined Tanks, Galvanised Steel Coils, Lead and Lead Alloy Coils, Titanium Coils, Metal Cased Heaters, Teflon Immersion Heaters, Silica Cased Heaters
Kiveton Park Steel - Manufacturer of bright engineering steel bar and wire.Kiveton Park Steel Ltd
Manufacturer of bright engineering steel bar and wire, accredited for making products required in the Automotive (ISO TS 16949), Aircraft (AS EN 9100), Cold Forming and Machined Parts industries.
Kiveton Park Steel is the specialist in bright drawing and heat treatment of Alloy and Carbon Engineering steels with full Quality Control at each process stage, including 100% non-destructive testing through Ultrasonic and Surface Defect Detection. Located close to Sheffield, England, which is the birthplace of steelmaking, the company is ideally located for all major road, rail and sea ways.
The company operates a progressive health & safety policy with award winning initiatives and is committed to continuous improvements in environmental performance, having approval to
BS EN ISO 14001.
ECOBOARD - saves trees while making beautiful furnitureSujani Indukuri
'ECOBOARD' is a 100% wood free tough alternative to conventional particle boards, plywood and other panel products. In keeping with our commitment towards a Greener Earth, Ecoboard Industries Ltd. bring you a Revolutionary Concept in Design and Decor.
'ECOBOARD' is a versatile all purpose Particle board. Its homogeneous processing and usage of fiber-reinforcement system with 11% resin content ensures a much higher bonding strength which is as good as natural wood. Ecoboard Industries Ltd., in collaboration with nature, is in the pursuit of converting the planet into a good earth obviating the side effects of industrial revolution.
Asopos is a river that rises in Viotia and discharges into the South Euboea Gulf in Greece, about 60 km north of Athens.Forty years ago, in 1969, through a Presidential Decree, issued by the Military Government (Junta) that ruled Greece at the time, Asopos was proclaimed a Processed Industrial Waste receiver. The river the Ancient Greeks worshiped as a god (Asopos was Poseidon’s son) was unfortunate enough to run through areas that turn out almost 20% of Greece’s total industrial production.
Today, Asopos’ waters receive waste from hundreds of industries, situated at a nearby Industrial area. Nevertheless, only a slight amount of water reaches its estuary. The texture of the soil absorbs the largest part of the water, including all the industrial waste, and spreads it to the whole underground water. This results to a possibly irreversible pollution of a huge area with various waste, amongst which heavy metals, including the renowned due to recent publicity, Hexavalent Chromium. This is an element that causes cancer and/or mutations.
The water from the springs, the fountains and the drillings in this whole area is no longer suitable for any human use, neither drinking nor cooking, bathing and washing clothes, not even for watering plants!
Hundreds of thousands of residents inhabit the area, especially during the summer. All these people have been consuming water for years, without ever having been officially informed of the hazards, until early this summer (2007).
Recently, after 3 adjournments and a delay of 6 years, a trial took place. 10 out of 18 defendants were acquitted due to misrecorded data! For those convicted, the highest punishment was the ridiculous amount of EURO 5000 as a fine!
Various reportings have revealed that some industries open up drillings and convey inside all their waste- directly into the underground water!
We request that the Greek Government, the Greek Parliament, the European Community Authorities and every other qualified service take all necessary measures and actions in order to insure the restoration of Asopos river, as well as the indemnification of all the problems (health related, economical, environmental) the residents are facing due to this situation.
Project Management Challenges in an Effluent Treatment Plant Construction PRABHASH GOKARN
Tata Steel operates India’s largest chromite mines at the Sukinda Valley in Odisha producing chrome ore which is subsequently converted it to Ferro Chrome and sold to customers across the world. A large quantity of water, generated during mining and due to rainfall, needs to be handled during the mining operations. Chrome Ore mainly contains tri-valent Chromic oxide and a very small fraction of hexavalent di-chromate. Water coming in contact with chromium ore preferentially leaches out soluble hexavalent chromium from the ore body, as a result, water from the mine contains 0.2 – 4 mg/l of hexavalent chromium against a safe limit of 0.005 mg/l for human consumption; requiring all water to be treated before its release from the mines. Thus, Tata Steel is setting up an effluent plant at Sukinda with a capacity of 108 million litres/day; perhaps one of the largest in the region; which will be complete by end June 2015.
This presentation will cover the Composite Market growth trends and Owens Corning glass fiber product developments for end-user productivity and product performance improvements. The presentation includes Owens Corning product developments around sizing chemistry, product property and glass chemistry innovations that deliver a range of product solutions in key glass fiber market segments including wind energy, automotive, construction and industrial applications.
Presentation by Dr. Chris Skinner @JEC Europe 2014 on market trends for wind energy and Owens Corning integrated glass solutions to reduce the cost of wind energy for blade producers.
Colourtech has carved a niche for Pigments Products for the entire spectrum of Composite Industry and specializes in offering Polyester, Epoxy Pigments, Catalyst and Accelerators. Our products are recommended for a wide range of critical applications and industries such as construction, automotive, marine, and aerospace, electronics, petrochemical, industrial, recreational and consumer industries
Presentation by Corey Melvin of Owens Corning at CAMX on October 16, 2014. He discusses double digit growth in the use of Long Fiber Thermoplastics (LFT) due to the automotive and transportation markets, where light weighting and improved aerodynamics delivers improved fuel efficiency, reduced CO2 emissions and an increase in commercial payload capacity. The focus is on advantages of LFT and market opportunities for continued growth.
Presentation by David Hartman, Senior Technical Staff, Owens Corning at CAMX on October 15, 2014. Advances in reinforcement materials, specifically glass fiber materials, should not go unnoticed. In this presentation discover new advances in glass fiber technology areas, applications to various markets and the needs of those markets, as well as current advances in fiber reinforcement materials and forms.
Presentation by Hans Van der Steen, Owens Corning, Global Business Development Leader, Structural Composites, at CAMX on October 16, 2014. Sheet molded compounds (SMC) allow the automotive industry to make large and complex parts at affordable cost, while meeting the specific requirements for structural applications in automobiles. This presentation reviews the performance of glass fiber multi-end rovings in epoxy resin systems and highlights the specific benefits this solution brings to the automotive industry.
Constellium - The life-cycle of aluminiumConstellium
Aluminium is valuable at every stage of its life-cycle and can be endlessly recycled without loss of properties. “Going full circle – The life-cycle of aluminium” is the title of the new publication where Constellium presents three essentials to make infinite recycling a reality.
Constellium believes that players, within and outside the aluminium industry, through better collaboration can foster good practices to ensure the highest possible value is delivered at every step of the value chain.
Electroplating, Phosphating, Powder Coating and Metal Finishing Ajjay Kumar Gupta
Electroplating, Phosphating, Powder Coating and Metal Finishing (Electroplating Plant, Copper Plating, Electroforming, Brass Plating, Silver Plating, Tin-Nickel Alloy Plating, Gold Plating (Gilding), Cadmium Plating, Zinc Plating)
Electroplating is a process that uses electric current to reduce dissolved metal cations so that they form a thin coherent metal coating on an electrode. The term is also used for electrical oxidation of anions onto a solid substrate, as in the formation silver chloride on silver wire to make silver/silver-chloride electrodes. Electroplating is primarily used to change the surface properties of an object (e.g. abrasion and wear resistance, corrosion protection, lubricity, aesthetic qualities, etc.), but may also be used to build up thickness on undersized parts or to form objects by electroforming.
See more
https://goo.gl/bKk1XU
https://goo.gl/5QasBV
https://goo.gl/sBmyLI
Contact us:
Niir Project Consultancy Services
106-E, Kamla Nagar, Opp. Spark Mall,
New Delhi-110007, India.
Email: npcs.ei@gmail.com , info@entrepreneurindia.co
Tel: +91-11-23843955, 23845654, 23845886, 8800733955
Mobile: +91-9811043595
Website: www.entrepreneurindia.co , www.niir.org
Tags
Electroplating Plant, Automatic Equipment, Surface Coatings and Treatments, Electroplating and Coating Plants, Electroplating Plant Equipment, Powder Coating Plants, Powder Coating Equipments, How to Start Powder Coating Business, Powder Coating Business Plan, Business Plan on Powder Coating, Start Powder Coating Business, Start High Profit Powder Coating Business, Starting Metal Polishing Business, Electroplating Business, Gold Plating Business, How to Start Metal Plating Business, Starting Zinc Plating Business, How to Start Electroplating Business, How to Start Metal Finishing Business, Starting Metal Polishing Business, Metal Finishing Industry, Business Plans for Metal Finishing, Zinc Plating Process, Zinc Plating Plant, Electroplating Plant for Acid Zinc, Electroplating Plant Equipment, Fixed Sequence Automatic Plating Plant, Trojan and Gem Type Automatic Plant, Vulcan Lattice Arm Type Automatic Plant, Titan Type Automatic Plant, Digit Pivoted Arm Type Automatic Plant, Straight-Through Type Automatic Plant, Methods of Transporter Control, Microprocessor and Computer Control, Semi-Automatic Plating Plant, Barrel Planting Plant, Suitability of Articles for Barrel Plating, Glydo/Glydette Barrel Plating Equipment, Calculation of Work Loads, Manual Planting Plant, Single Station Barrel Plating Units, Modular Plant and Specialised Equipment for Electronics Industry, Electroplating Equipment, Welded Steel Tanks, Plastic Tanks Reinforced with Glass Fibre, Tank Lining Materials, Glass Fibre (GRP) Tanks, Treatment of Rubber Linings, Ilex Grade Plastic Lined Tanks, Galvanised Steel Coils, Lead and Lead Alloy Coils, Titanium Coils, Metal Cased Heaters, Teflon Immersion Heaters, Silica Cased Heaters
Kiveton Park Steel - Manufacturer of bright engineering steel bar and wire.Kiveton Park Steel Ltd
Manufacturer of bright engineering steel bar and wire, accredited for making products required in the Automotive (ISO TS 16949), Aircraft (AS EN 9100), Cold Forming and Machined Parts industries.
Kiveton Park Steel is the specialist in bright drawing and heat treatment of Alloy and Carbon Engineering steels with full Quality Control at each process stage, including 100% non-destructive testing through Ultrasonic and Surface Defect Detection. Located close to Sheffield, England, which is the birthplace of steelmaking, the company is ideally located for all major road, rail and sea ways.
The company operates a progressive health & safety policy with award winning initiatives and is committed to continuous improvements in environmental performance, having approval to
BS EN ISO 14001.
ECOBOARD - saves trees while making beautiful furnitureSujani Indukuri
'ECOBOARD' is a 100% wood free tough alternative to conventional particle boards, plywood and other panel products. In keeping with our commitment towards a Greener Earth, Ecoboard Industries Ltd. bring you a Revolutionary Concept in Design and Decor.
'ECOBOARD' is a versatile all purpose Particle board. Its homogeneous processing and usage of fiber-reinforcement system with 11% resin content ensures a much higher bonding strength which is as good as natural wood. Ecoboard Industries Ltd., in collaboration with nature, is in the pursuit of converting the planet into a good earth obviating the side effects of industrial revolution.
Asopos is a river that rises in Viotia and discharges into the South Euboea Gulf in Greece, about 60 km north of Athens.Forty years ago, in 1969, through a Presidential Decree, issued by the Military Government (Junta) that ruled Greece at the time, Asopos was proclaimed a Processed Industrial Waste receiver. The river the Ancient Greeks worshiped as a god (Asopos was Poseidon’s son) was unfortunate enough to run through areas that turn out almost 20% of Greece’s total industrial production.
Today, Asopos’ waters receive waste from hundreds of industries, situated at a nearby Industrial area. Nevertheless, only a slight amount of water reaches its estuary. The texture of the soil absorbs the largest part of the water, including all the industrial waste, and spreads it to the whole underground water. This results to a possibly irreversible pollution of a huge area with various waste, amongst which heavy metals, including the renowned due to recent publicity, Hexavalent Chromium. This is an element that causes cancer and/or mutations.
The water from the springs, the fountains and the drillings in this whole area is no longer suitable for any human use, neither drinking nor cooking, bathing and washing clothes, not even for watering plants!
Hundreds of thousands of residents inhabit the area, especially during the summer. All these people have been consuming water for years, without ever having been officially informed of the hazards, until early this summer (2007).
Recently, after 3 adjournments and a delay of 6 years, a trial took place. 10 out of 18 defendants were acquitted due to misrecorded data! For those convicted, the highest punishment was the ridiculous amount of EURO 5000 as a fine!
Various reportings have revealed that some industries open up drillings and convey inside all their waste- directly into the underground water!
We request that the Greek Government, the Greek Parliament, the European Community Authorities and every other qualified service take all necessary measures and actions in order to insure the restoration of Asopos river, as well as the indemnification of all the problems (health related, economical, environmental) the residents are facing due to this situation.
Project Management Challenges in an Effluent Treatment Plant Construction PRABHASH GOKARN
Tata Steel operates India’s largest chromite mines at the Sukinda Valley in Odisha producing chrome ore which is subsequently converted it to Ferro Chrome and sold to customers across the world. A large quantity of water, generated during mining and due to rainfall, needs to be handled during the mining operations. Chrome Ore mainly contains tri-valent Chromic oxide and a very small fraction of hexavalent di-chromate. Water coming in contact with chromium ore preferentially leaches out soluble hexavalent chromium from the ore body, as a result, water from the mine contains 0.2 – 4 mg/l of hexavalent chromium against a safe limit of 0.005 mg/l for human consumption; requiring all water to be treated before its release from the mines. Thus, Tata Steel is setting up an effluent plant at Sukinda with a capacity of 108 million litres/day; perhaps one of the largest in the region; which will be complete by end June 2015.
Anti arthritic-efficacy-and-safety-of-crominex-3+(trivalent-chromium-phyllant...Annex Publishers
Abstract
The present investigation was undertaken to evaluate the therapeutic efficacy and safety of Crominex® 3+ (a complex of trivalent chromium, Phyllanthus emblica (Amla) extract and purified Shilajit) in moderately arthritic dogs. Eleven client-owned moderately arthritic dogs in a randomized double-blinded study received placebo or Crominex® 3+ twice daily for a period of 150 days. On a monthly basis, each dog was evaluated for arthritis associated pain (overall pain, pain upon limb manipulation and pain after physical exertion) and a full physical exam (body weight, body temperature and heart rate). At the same time intervals, dogs serum samples were examined for biomarkers of kidney (BUN and creatinine), liver (bilirubin, ALT and AST) and heart and skeletal muscle (CK) functions. Findings of this investigation revealed that dogs receiving Crominex® 3+ (1000 μg chromium, 15 mg Amla extract and 15 mg purified Shilajit per day in two divided doses) exhibited a significant (P< 0.05) reduction in arthritic pain noted as early as after 90 days with a maximum reduction after 150 days of treatment. Pain level remained the same or slightly increased in the dogs receiving placebo. No significant change occurred in physical parameters or serum biomarkers in dogs on placebo or Crominex® 3+, which suggested that Crominex® 3+ was well tolerated by arthritic dogs. In conclusion, Crominex® 3+ significantly (P< 0.05) ameliorated arthritic pain and improved quality of life without causing any untoward effects in moderately arthritic dogs.
40 cfr 261.4(b)(6) The RCRA Exclusion From Hazardous Waste for Trivalent Chro...Daniels Training Services
The Trivalent Chromium Wastes Exclusion from Regulation as a Hazardous Waste
40 CFR 261.4(b)(6) excludes Trivalent Chromium Waste, a solid waste, from regulation as a hazardous waste if the requirements of the regulations are met. This presentation briefly summarizes the requirements of this RCRA exclusion from regulation.
Those in the leather tanning industry, leather product manufacturing industry, shoe manufacturing industry, and titanium dioxide manufacturing industry should be aware of this RCRA exclusion and its possible impact on their operations.
Chromium is a metal that exists in several oxidation
• Chromium is a metal that exists in several oxidation or valence states, ranging from chromium (-II) to chromium (+VI).
• Chromium compounds are very stable in the trivalent state and occur naturally in this state in ores such as ferrochromite, or chromite ore.
• Chrome III is an essential nutrient for maintaining blood glucose levels
• The hexavalent, Cr(VI) or chromate, is the second most stable state. It rarely occurs naturally.
Worked with different particle size of coffee as an antioxidant to find which size creates a reaction at a faster rate in the reduction of Chromium IV to Chromium III.
tannery industry is the industry where leather is manufactured from the skins of animals . the whole process and the way it affects the water and their treatment has been mentioned in this ppt.
We are pleased to introduce our self as An ISO 9001 : 2015, ISO 14001 : 2015 & OHSAS 18001 : 2007 certified Company manufacturing complete range of construction and maintenance solutions. Monarch's technologically advanced Maintenance solutions assist to enhance your plants productivity / efficiency without any interruptions of down time and break downs. We have wide network of trained company engineers and dealers across the country to diagnose your maintenance problem and recommend solutions. You may contact us for on-line technical recommendation or find out your nearest Monarch Dealer.
Zinc-nickel with cobalt free passivation provides exceptional corrosion resistance. This presentation given at ASEAN brake conference in February 2015 outlines the technology.
Korea Zinc Flake Coating - Zincotec Co., Ltd.Onplus
◈ About Zincotec Co., Ltd.
All products manufactured by Zincotec are water soluble, non-flammable and environmentally friendly. Zincotec products also meet any and all safety standards and codes related to the harmfulness against the human body and create a safe and comfortable work environment with convenient handling and low odor, a significant difference when compared with solvent based products.
For more information, visit our website !
http://zincotec.com/
Rotex is a leading manufacturer and exporter of fluid control systems, pneumatic actuators, valve automation systems and control components, with a market presence in more than 30 countries. Having started off in 1967 with one modest industrial building, Rotex now has 4 state-of-the art manufacturing facilities in India and recently acquired 1 in Germany. Through constant innovation and providing customised solutions, Rotex has achieved a steady annual growth of 30% with a sizeable share of the Indian market. Rotex caters to clients come from a wide spectrum of industries like steel, chemicals, pharmaceuticals, oil and gas, railways, power etc. Through a dedicated and highly experienced team of agents and a global network of local offices, Rotex caters to its customers’ requirements and provides quality service and after sales support. Rotex has secured numerous patents on its innovative designs developed to help their customers gain maximum benefit.
Bodycote coatings are used extensively in the Oil & Gas Industry. The centre schematic shows the types of components and where they're located within the industry structure.
Monarch's Cost Saving Solutions In Repair & Maintenance of aging assets and Protection & Improvement of new Assets in Mechanical, Electrical, Civil and Project Engineering Domains.
We are pleased to introduce our self as an ISO 9001 : 2008, ISO 14001:2004 & OHSAS 18001:2007 certified Company manufacturing complete range of construction and maintenance solutions. Monarch's technologically advanced Maintenance solutions assist to enhance your plants productivity / efficiency without any interruptions of down time and break downs. We have wide network of trained company engineers and dealers across the country to diagnose your maintenance problem and recommend solutions. You may contact us for on-line technical recommendation or find out your nearest Monarch Dealer.
Sanford Process Corporation Company Introduction and Recent Anodizing Develop...Sanford Process Co.
Sanford Process is at the forefront of patented innovation in anodizing aluminum; with the first low voltage hard aluminum anodizing system and more recently with micro-crystalline anodizing, MICRALOX. Sanford Process licenses developed technologies and provides contract development work on an exclusive or non-exclusive basis. We deliver validated process and product design solutions with detailed instructions, and can also arrange complete part processing through our sister company, DCHN LLC.
Building a Raspberry Pi Robot with Dot NET 8, Blazor and SignalR - Slides Onl...Peter Gallagher
In this session delivered at Leeds IoT, I talk about how you can control a 3D printed Robot Arm with a Raspberry Pi, .NET 8, Blazor and SignalR.
I also show how you can use a Unity app on an Meta Quest 3 to control the arm VR too.
You can find the GitHub repo and workshop instructions here;
https://bit.ly/dotnetrobotgithub
Google Calendar is a versatile tool that allows users to manage their schedules and events effectively. With Google Calendar, you can create and organize calendars, set reminders for important events, and share your calendars with others. It also provides features like creating events, inviting attendees, and accessing your calendar from mobile devices. Additionally, Google Calendar allows you to embed calendars in websites or platforms like SlideShare, making it easier for others to view and interact with your schedules.
2. | MACDERMID | MARKETS | ANTI-CORROSION | DECORATIVE | ENGINEERING | LUBRICANTS | METALLURGY | PET | SURFACE PREPARATION |2
Consumer Electronics – Different Coatings Meet Various
Functionality Requirements
Anti-Corrosion
• Prevents premature corrosion of
ferrous substrates
Conversion Coatings
• Improves paint adhesion and
corrosion resistance
Electroless Nickel
• Adds functionality such as
conductivity and wear resistance
Fashion Finishes
• Adds cosmetic appeal and
improves wear resistance
3. 3 | MACDERMID | MARKETS | ANTI-CORROSION | DECORATIVE | ENGINEERING | LUBRICANTS | METALLURGY | PET | SURFACE PREPARATION |3
Where Are Our Industrial Solutions Products Used in
Finishing for Electronic Components?
Home Entertainment
Mobile Devices
Domestic Appliances
Computers
11. 11 | MACDERMID | MARKETS | ANTI-CORROSION | DECORATIVE | ENGINEERING | LUBRICANTS | METALLURGY | PET | SURFACE PREPARATION |11
Conversion Coatings Provide Corrosion Resistance and
Improve Organic Coating Adhesion
Pump Housing
Equipment Frame
Knobs and Switches
Wire Work
12. | MACDERMID | MARKETS | ANTI-CORROSION | DECORATIVE | ENGINEERING | LUBRICANTS | METALLURGY | PET | SURFACE PREPARATION |12
MacDermid – Market Driven Coatings for the Consumer
Electronics Industry
Performance
Market Driven
Innovation
Our innovative products do not compromise on performance.
Many of our new coatings offer higher performance than
non-compliant finishes. For example trivalent passivates give
improved resistance to white rust and electroless nickels can
offer higher specular gloss levels.
• Electroless Nickel – RoHS compliant systems
• Anti-corrosion – Cobalt-free, trivalent chromium passivation
• Fashion Finishes – Dark Satin Chromium
• Conversion Coatings – Chromium-free
Our primary market drivers are based on meeting both
environmental directives such as RoHS / WEEE and new
cosmetic finishes including satin and darker metallic coatings
13. | MACDERMID | MARKETS | ANTI-CORROSION | DECORATIVE | ENGINEERING | LUBRICANTS | METALLURGY | PET | SURFACE PREPARATION |13
The Consumer Electronics Industry Demands Coatings
Free of Heavy Metals and Carcinogenic Compounds
Hazardous and toxic materials such as hexavalent chromium,
cadmium and lead are prohibited by RoHS and WEEE
Which technology does MacDermid offer for replacing
hazardous and toxic materials?
New coatings must meet these new directives and
legislation and offer improved performance
14. | MACDERMID | MARKETS | ANTI-CORROSION | DECORATIVE | ENGINEERING | LUBRICANTS | METALLURGY | PET | SURFACE PREPARATION |14
The Consumer Electronics Industry Demands Coatings
Free of Heavy Metals and Carcinogenic Compounds
Hazardous and toxic materials such as hexavalent chromium,
cadmium and lead are prohibited by RoHS and WEEE
RoHS - The Restriction of the Use of
Certain Hazardous Substances in
Electrical and Electronic Equipment
Directive (2011/65/EU) bans the
placing on the EU market of new
equipment containing more than the
agreed levels of lead, cadmium,
mercury and hexavalent chromium.
WEEE - Recycling is a specialist
part of the waste and recycling
industry. It is a rapidly growing sub-
sector due largely to the
implementation of the original WEEE
Directive 2006.
15. | MACDERMID | MARKETS | ANTI-CORROSION | DECORATIVE | ENGINEERING | LUBRICANTS | METALLURGY | PET | SURFACE PREPARATION |15
The Consumer Electronics Industry Demands Coatings
Free of Heavy Metals and Carcinogenic Compounds
New coatings must meet these new directives and
legislation and offer improved performance
Average life for consumer white goods is around 5 years.
During this time the coatings resist corrosion and wear.
This enables to components to maintain electrical
conductivity and retain their ‘show room’ look and style
even in the humid kitchen environment.
Small consumer electronics generally have a life span of 2
– 3 years. The electrical components must continue to
function even when exposed to extremes of temperature
and wear and tear due to daily life.
16. | MACDERMID | MARKETS | ANTI-CORROSION | DECORATIVE | ENGINEERING | LUBRICANTS | METALLURGY | PET | SURFACE PREPARATION |16
MacDermid Has Developed Technology Which Is Already
Proven in Other Industries (i.e. Automotive, Aerospace)
Which technology does MacDermid offer for replacing
hazardous and toxic materials?
TriPass ELV 7000 NiKlad ELV 849 Iridite NCP
17. | MACDERMID | MARKETS | ANTI-CORROSION | DECORATIVE | ENGINEERING | LUBRICANTS | METALLURGY | PET | SURFACE PREPARATION |17
High Performance Technology Free of Hexavalent
Cadmium, Cobalt, Chromium (Hexavalent) and Lead
Iridite NCP
NiKlad ELV 849
TriPass ELV 7000
• Chromium-free conversion coating for aluminum.
• High adhesion values for painted surfaces.
• Excellent corrosion protection.
• Electroless nickel alloy with up to 9% phosphorus.
• Very bright deposit.
• Improves corrosion and wear resistance.
• Blue passivate for zinc and zinc-iron
• Solution free from hexavalent chromium and cobalt
(SVHC-free)
• Inhibitor content can be analyzed in the film
