Electrical System
•
0 likes•368 views
The document provides an overview of training on electrical systems, including: 1. It describes the main components of a power supply system such as transformers, circuit breakers, lightning arresters, and isolators. 2. It discusses different types of maintenance including planned maintenance like preventative and predictive maintenance, and unplanned maintenance like emergency and breakdown maintenance. 3. It emphasizes the importance of documentation in maintenance to analyze breakdowns and reduce downtime.
Report
Share
Report
Share
![CONTENT’S ,[object Object],[object Object],[object Object],[object Object]](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
General Maintenance
The document discusses different types of maintenance activities. It defines maintenance and its objectives to keep equipment operational at minimum cost. It describes various types of maintenance including planned preventive maintenance to minimize breakdowns, and unplanned corrective maintenance after failures occur. Predictive maintenance uses condition monitoring to detect potential failures while preventive maintenance relies on routine inspections.
Unit-1 ME 6012
The document discusses principles and practices of maintenance planning in engineering systems. It describes key concepts like maintenance engineering, types of planning, objectives of planned maintenance, principles of maintenance systems, reliability measures like MTBF and MTTR, maintenance organization structures, and maintenance economics and costs. The overall goal of maintenance planning is to optimize equipment availability and performance at lowest cost through reliable maintenance strategies.
Maintenance Strategy, Types of Maintenance
The document discusses various maintenance strategies including breakdown maintenance, corrective maintenance, and preventive maintenance. It provides details on each strategy such as the approach, advantages, disadvantages, and components. Preventive maintenance involves periodic inspection, servicing, and repairs to equipment on a planned schedule to avoid breakdowns. The goals are to minimize failures, increase equipment life, and acquire maintenance history data. Sources for developing preventive maintenance procedures include vendor recommendations, plant experience, and generic approaches.
Lec1 maintenance definition
1) Maintenance is defined as actions intended to retain or restore an item to a state in which it can perform its required function.
2) There are different types of maintenance including preventive maintenance, which aims to reduce failures before they occur; corrective maintenance, which repairs items after failure; and run-to-failure maintenance, which only repairs items after breakdown.
3) Attitudes toward maintenance have changed over time from seeing it as only a cost to recognizing its role in production, quality, safety, and the environment. Modern companies rely on well-organized maintenance programs for success.
Plant Maintenance
Plant maintenance involves keeping industrial plants in good operating condition through day-to-day problem solving and resource management. It aims to control and improve plant availability and performance. Maintenance includes both corrective actions to restore facilities as well as preventive maintenance like lubrication, inspection, and condition monitoring to predict and prevent failures. The goal is to minimize downtime and repair costs while ensuring safety, quality production, and prolonging equipment life. Preventive maintenance is particularly important, requiring careful planning, record keeping, and parameter monitoring using specialized equipment. Both too much and too little preventive maintenance can be problematic, requiring judgment to determine the optimal approach.
Introduction to maintenance
The document discusses different types of maintenance including corrective, preventive, and predictive maintenance. It provides examples of maintenance in various industries like manufacturing, services, and transportation. Preventive maintenance aims to reduce equipment failures and degradation through planned inspection and servicing. Benefits include minimizing downtime, production losses, and maintenance costs. Effective preventive maintenance requires management support, qualified staff, and proper planning and scheduling of maintenance programs.
Maintenance Management
This document provides an overview of maintenance concepts for business students. It defines maintenance and maintenance management, and describes different types of maintenance including corrective, preventive, predictive, routine and planned maintenance. It also discusses spares management in terms of insurance, capital and reusable spares. Other topics covered include maintenance policy and scheduling, types of failures based on normal and Poisson distributions, and self-assessment questions.
Principles and practices of maintenance planning
The document discusses principles and practices of maintenance planning. It covers topics like objectives of maintenance planning, reliability measures like MTBF and MTTR, and importance of maintenance systems. The key objectives of maintenance planning are to maximize production capacity at lowest cost, reduce breakdowns, and optimize resource utilization. Reliability is defined as the probability that an item will perform its intended function for a specified time period. MTBF is the average time between failures, while MTTR is the average time required to repair a failure and return the equipment to working order.
Recommended
General Maintenance
The document discusses different types of maintenance activities. It defines maintenance and its objectives to keep equipment operational at minimum cost. It describes various types of maintenance including planned preventive maintenance to minimize breakdowns, and unplanned corrective maintenance after failures occur. Predictive maintenance uses condition monitoring to detect potential failures while preventive maintenance relies on routine inspections.
Unit-1 ME 6012
The document discusses principles and practices of maintenance planning in engineering systems. It describes key concepts like maintenance engineering, types of planning, objectives of planned maintenance, principles of maintenance systems, reliability measures like MTBF and MTTR, maintenance organization structures, and maintenance economics and costs. The overall goal of maintenance planning is to optimize equipment availability and performance at lowest cost through reliable maintenance strategies.
Maintenance Strategy, Types of Maintenance
The document discusses various maintenance strategies including breakdown maintenance, corrective maintenance, and preventive maintenance. It provides details on each strategy such as the approach, advantages, disadvantages, and components. Preventive maintenance involves periodic inspection, servicing, and repairs to equipment on a planned schedule to avoid breakdowns. The goals are to minimize failures, increase equipment life, and acquire maintenance history data. Sources for developing preventive maintenance procedures include vendor recommendations, plant experience, and generic approaches.
Lec1 maintenance definition
1) Maintenance is defined as actions intended to retain or restore an item to a state in which it can perform its required function.
2) There are different types of maintenance including preventive maintenance, which aims to reduce failures before they occur; corrective maintenance, which repairs items after failure; and run-to-failure maintenance, which only repairs items after breakdown.
3) Attitudes toward maintenance have changed over time from seeing it as only a cost to recognizing its role in production, quality, safety, and the environment. Modern companies rely on well-organized maintenance programs for success.
Plant Maintenance
Plant maintenance involves keeping industrial plants in good operating condition through day-to-day problem solving and resource management. It aims to control and improve plant availability and performance. Maintenance includes both corrective actions to restore facilities as well as preventive maintenance like lubrication, inspection, and condition monitoring to predict and prevent failures. The goal is to minimize downtime and repair costs while ensuring safety, quality production, and prolonging equipment life. Preventive maintenance is particularly important, requiring careful planning, record keeping, and parameter monitoring using specialized equipment. Both too much and too little preventive maintenance can be problematic, requiring judgment to determine the optimal approach.
Introduction to maintenance
The document discusses different types of maintenance including corrective, preventive, and predictive maintenance. It provides examples of maintenance in various industries like manufacturing, services, and transportation. Preventive maintenance aims to reduce equipment failures and degradation through planned inspection and servicing. Benefits include minimizing downtime, production losses, and maintenance costs. Effective preventive maintenance requires management support, qualified staff, and proper planning and scheduling of maintenance programs.
Maintenance Management
This document provides an overview of maintenance concepts for business students. It defines maintenance and maintenance management, and describes different types of maintenance including corrective, preventive, predictive, routine and planned maintenance. It also discusses spares management in terms of insurance, capital and reusable spares. Other topics covered include maintenance policy and scheduling, types of failures based on normal and Poisson distributions, and self-assessment questions.
Principles and practices of maintenance planning
The document discusses principles and practices of maintenance planning. It covers topics like objectives of maintenance planning, reliability measures like MTBF and MTTR, and importance of maintenance systems. The key objectives of maintenance planning are to maximize production capacity at lowest cost, reduce breakdowns, and optimize resource utilization. Reliability is defined as the probability that an item will perform its intended function for a specified time period. MTBF is the average time between failures, while MTTR is the average time required to repair a failure and return the equipment to working order.
Maintenance and Asset Management
Maintenance is important in any organization. Without proper maintenance, assets deteriorate over time reducing the quality of your output produced. It can also impact the safety of your asset or your people who operate it. Asset management focuses on assuring your people that parts and processes are optimized to improve asset performance. Reducing inventory, maintenance costs and the number of downtime events raises your productivity, while simultaneously driving financial performance and predictability. It also helps your employees with the right tools to make good decisions about driving your plant performance.
Maintenance Management
This document discusses maintenance management. It outlines different types of maintenance including breakdown, preventive, predictive, routine, and planned maintenance. The objectives of maintenance are to minimize downtime and costs while keeping assets operational. Maintenance involves civil, mechanical, and electrical areas. A key point is that total maintenance costs include commitment costs, preventive maintenance costs, and breakdown costs, with the optimal policy balancing these to achieve the lowest overall costs.
Maintenance management and control
In this lecture, first functions of a maintenance department is presented. Then discussed how to manage a maintenance program effectively. Then objectives, principles, effectiveness and elements of effective maintenance management. Finally presented maintenance management control indices used in different industries.
Maintenance module1 ppt number 3
The document discusses key concepts in reliability engineering and maintenance including reliability, maintainability, availability, and their relationships. It defines reliability as the probability a system will perform as intended, and discusses factors that determine reliability like operating conditions. Maintainability is defined as the ease of maintaining a system, and factors like repair time and costs. Availability is the proportion of time a system is usable and takes into account failure rates and repair times. Graphs like the bathtub curve are presented that illustrate failure rates over the lifetime of a product. Key metrics discussed include MTBF, MTTR, and their use in calculating availability.
Reliability and Maintenance in production Management
This ppt may help you to get a clear picture about reliability and maintenance in Production Management.
Feedback is a must!!!1
Regards.
Nazneen Sheikh
Maintenance and Operation Management-Emergency Management System
This document provides an overview of maintenance and operation for an Emergency Management System (EMS) case study in Bangladesh. It describes the key components of an EMS including software, hardware, network architecture and users. It then covers various aspects of maintaining and operating the EMS such as defining maintenance and operations, the management process, necessary systems and tools, required organization and human resources, different phases and types of maintenance. It also discusses methods, procedures and checks for regular and special maintenance of the EMS.
Basic Maintenance
This presentation is about the basic Maintenance, objectives, Types & its description, as well as equipment performance evaluation technique.
Maintenance Work Order
The document discusses maintenance policies and work order processes. It provides details on different types of maintenance policies including failure based, time based, condition based, and risk based approaches. It then describes the purpose and benefits of work orders, including recording downtime data, ensuring repairs are completed properly, and providing a source for planning and key performance indicators. Guidelines are provided on the information included in work orders like inventory details, requestor information, work descriptions, and actual completion details. The work order system and typical flow from generation to completion is outlined.
Plant & Maintenance Engineering
Plant & maintenance engineering is most important part of successful operation of a factory. But many companies ignore this function. Here is a brief presentation about aspects of plant & maintenance engineering, which is important part of operation and maintenance management.
Reliability Centered Maintenance
Definition of RCM, principles and goals of RCM; Four major components of RCM: reactive maintenance, preventive maintenance, predictive testing and inspection and proactive maintenance; RCM strategies.
Nota rojak 2
Computerized Maintenance Management Systems (CMMS) programs help organizations improve maintenance efficiency and cost control by eliminating paper-based systems. They provide features like preventive maintenance scheduling, automatic work order updates, inventory control, and predictive maintenance analysis. Implementing a CMMS can help maintenance departments shift from reactive to preventive maintenance, reduce downtime, capture employee knowledge, and generate reports to optimize processes.
How to set up a Preventive Maintenance Program
The document discusses the importance and best practices of implementing a preventive maintenance (PM) program. It outlines that PM programs can reduce emergency work orders by 25% and lower overall maintenance costs by performing cheaper scheduled maintenance. A successful PM program follows four steps: 1) determining PM schedules and plans, 2) assigning staff, 3) gaining management support, and 4) ongoing reporting and improvement. Regular maintenance can extend equipment lifespan, improve safety and energy efficiency, and lower long-term costs compared to deferred maintenance. The SchoolDude PMDirect software allows for automated PM work generation and performance tracking to help facilities teams successfully implement and monitor a PM program.
Intro to maintenance
The document discusses the importance of maintenance for productivity, quality, safety and profitability. It outlines different types of maintenance including corrective, preventive and predictive maintenance. Corrective maintenance involves repairs after equipment fails, while preventive maintenance aims to reduce breakdowns through scheduled inspections and minor repairs. The benefits of preventive maintenance include reduced downtime, lower repair costs, improved safety and quality, and extended equipment lifespan. The document emphasizes that the costs of equipment failure, including lost production and delayed shipments, can outweigh the costs of proper maintenance.
Maintenance module 1 ppt number 2
This document discusses key aspects of maintenance engineering including productivity, quality, reliability, and maintainability (PQRM). It explains that the right maintenance policy is required to avoid over or under maintenance. Good maintenance practices can increase equipment lifespan. PQRM are important for industry profitability. Productivity measures economic efficiency and output. Quality ensures products and processes meet standards. Reliability focuses on consistent performance over time. Maintainability refers to the ease of maintaining equipment. Quality circles in maintenance help solve work-related problems.
Building A Winning Maintenance Strategy
Guy Delahay, Owner and Managing Partner at Mainnovation Inc., discusses building a winning maintenance strategy through the use of the Value Driven Maintenance methodology, a state of the art framework that calculates economic added value of maintenance using Net Present Value techniques and industry specific maintenance benchmarks. Organizations that have embraced this practice have been able to achieve impressive results including:
30% Uptime Improvement
50% Cost Reduction
40% lower MRO stock value
View the slides to understand the steps invloved in building a winning maintenance strategy, such as understanding your Dominant Value Driver, utilizing KPI's and benchmarking, implementing Maintenance Best Practices, and exploring Value Drive Maintenance.
Maintenance management
Maintenance management involves planning, organizing, and directing resources to control the availability and performance of industrial plants. It aims to minimize downtime and repair costs while maximizing efficiency, prolonging asset life, and ensuring quality production. Effective maintenance management requires categorizing maintenance needs, prioritizing objectives like uptime and safety, and planning using approaches such as total productive maintenance which emphasizes prevention, employee involvement, and continuous improvement.
Maintenance management
Maintenance management aims to minimize equipment breakdowns and maximize asset availability for production. It involves planning and controlling maintenance activities to reduce overall costs. Preventive maintenance through periodic inspections and repairs helps anticipate failures, improve productivity and quality, and minimize accidents and repair costs compared to reactive breakdown maintenance. While preventive maintenance is more expensive initially, it has long-term benefits like increased equipment life, higher reliability, and reduced downtime.
Basics in Maintenance
This document discusses maintenance and methods for tracking losses and overcoming losses through proper maintenance activities. It defines maintenance as actions to retain or restore equipment to its maximum useful life. The three main types of maintenance are preventive, breakdown, and corrective. Preventive maintenance includes periodic and predictive maintenance. Periodic maintenance involves spare part replacement on a predefined schedule, while predictive maintenance uses equipment like bearing meters to determine condition-based maintenance. Metrics like mean time between failure (MTBF) and mean time to repair (MTTR) are discussed to measure equipment reliability and maintainability. Uptime is also defined as a percentage measure of up-time without downtime.
MAINTENANCE POLICIES – PREVENTIVE MAINTENANCE
Maintenance categories – Comparative merits of each category – Preventive maintenance, maintenance schedules, repair cycle - Principles and methods of lubrication – TPM
PRINCIPLES AND PRACTICES OF MAINTENANCE PLANNING
Basic Principles of maintenance planning – Objectives and principles of planned maintenance activity– Importance and benefits of sound Maintenance systems – Reliability and machine availability –MTBF, MTTR and MWT – Factors of availability – Maintenance organization – Maintenance economics.
a26e8dedece825e530c50c1240886cf0.pptx
Voltage sags and interruptions are short-duration reductions or losses of voltage caused by faults in the power system. They can negatively impact sensitive equipment like computers and motor drives. Solutions exist at multiple levels, from protecting individual small loads to implementing power conditioning technologies or backup power sources for entire facilities. The best approach depends on the critical equipment and process requirements.
Power system protection seminar report
The document provides an overview of substation protection devices. It acknowledges the importance of safety in electrical power systems and discusses several key components used in substation protection schemes: current transformers, potential transformers, protection relays, circuit breakers, lightning arresters, and isolators. The summary describes how these devices work together to detect faults and isolate only the faulty section of the system, maintaining power to the healthy sections.
More Related Content
What's hot
Maintenance and Asset Management
Maintenance is important in any organization. Without proper maintenance, assets deteriorate over time reducing the quality of your output produced. It can also impact the safety of your asset or your people who operate it. Asset management focuses on assuring your people that parts and processes are optimized to improve asset performance. Reducing inventory, maintenance costs and the number of downtime events raises your productivity, while simultaneously driving financial performance and predictability. It also helps your employees with the right tools to make good decisions about driving your plant performance.
Maintenance Management
This document discusses maintenance management. It outlines different types of maintenance including breakdown, preventive, predictive, routine, and planned maintenance. The objectives of maintenance are to minimize downtime and costs while keeping assets operational. Maintenance involves civil, mechanical, and electrical areas. A key point is that total maintenance costs include commitment costs, preventive maintenance costs, and breakdown costs, with the optimal policy balancing these to achieve the lowest overall costs.
Maintenance management and control
In this lecture, first functions of a maintenance department is presented. Then discussed how to manage a maintenance program effectively. Then objectives, principles, effectiveness and elements of effective maintenance management. Finally presented maintenance management control indices used in different industries.
Maintenance module1 ppt number 3
The document discusses key concepts in reliability engineering and maintenance including reliability, maintainability, availability, and their relationships. It defines reliability as the probability a system will perform as intended, and discusses factors that determine reliability like operating conditions. Maintainability is defined as the ease of maintaining a system, and factors like repair time and costs. Availability is the proportion of time a system is usable and takes into account failure rates and repair times. Graphs like the bathtub curve are presented that illustrate failure rates over the lifetime of a product. Key metrics discussed include MTBF, MTTR, and their use in calculating availability.
Reliability and Maintenance in production Management
This ppt may help you to get a clear picture about reliability and maintenance in Production Management.
Feedback is a must!!!1
Regards.
Nazneen Sheikh
Maintenance and Operation Management-Emergency Management System
This document provides an overview of maintenance and operation for an Emergency Management System (EMS) case study in Bangladesh. It describes the key components of an EMS including software, hardware, network architecture and users. It then covers various aspects of maintaining and operating the EMS such as defining maintenance and operations, the management process, necessary systems and tools, required organization and human resources, different phases and types of maintenance. It also discusses methods, procedures and checks for regular and special maintenance of the EMS.
Basic Maintenance
This presentation is about the basic Maintenance, objectives, Types & its description, as well as equipment performance evaluation technique.
Maintenance Work Order
The document discusses maintenance policies and work order processes. It provides details on different types of maintenance policies including failure based, time based, condition based, and risk based approaches. It then describes the purpose and benefits of work orders, including recording downtime data, ensuring repairs are completed properly, and providing a source for planning and key performance indicators. Guidelines are provided on the information included in work orders like inventory details, requestor information, work descriptions, and actual completion details. The work order system and typical flow from generation to completion is outlined.
Plant & Maintenance Engineering
Plant & maintenance engineering is most important part of successful operation of a factory. But many companies ignore this function. Here is a brief presentation about aspects of plant & maintenance engineering, which is important part of operation and maintenance management.
Reliability Centered Maintenance
Definition of RCM, principles and goals of RCM; Four major components of RCM: reactive maintenance, preventive maintenance, predictive testing and inspection and proactive maintenance; RCM strategies.
Nota rojak 2
Computerized Maintenance Management Systems (CMMS) programs help organizations improve maintenance efficiency and cost control by eliminating paper-based systems. They provide features like preventive maintenance scheduling, automatic work order updates, inventory control, and predictive maintenance analysis. Implementing a CMMS can help maintenance departments shift from reactive to preventive maintenance, reduce downtime, capture employee knowledge, and generate reports to optimize processes.
How to set up a Preventive Maintenance Program
The document discusses the importance and best practices of implementing a preventive maintenance (PM) program. It outlines that PM programs can reduce emergency work orders by 25% and lower overall maintenance costs by performing cheaper scheduled maintenance. A successful PM program follows four steps: 1) determining PM schedules and plans, 2) assigning staff, 3) gaining management support, and 4) ongoing reporting and improvement. Regular maintenance can extend equipment lifespan, improve safety and energy efficiency, and lower long-term costs compared to deferred maintenance. The SchoolDude PMDirect software allows for automated PM work generation and performance tracking to help facilities teams successfully implement and monitor a PM program.
Intro to maintenance
The document discusses the importance of maintenance for productivity, quality, safety and profitability. It outlines different types of maintenance including corrective, preventive and predictive maintenance. Corrective maintenance involves repairs after equipment fails, while preventive maintenance aims to reduce breakdowns through scheduled inspections and minor repairs. The benefits of preventive maintenance include reduced downtime, lower repair costs, improved safety and quality, and extended equipment lifespan. The document emphasizes that the costs of equipment failure, including lost production and delayed shipments, can outweigh the costs of proper maintenance.
Maintenance module 1 ppt number 2
This document discusses key aspects of maintenance engineering including productivity, quality, reliability, and maintainability (PQRM). It explains that the right maintenance policy is required to avoid over or under maintenance. Good maintenance practices can increase equipment lifespan. PQRM are important for industry profitability. Productivity measures economic efficiency and output. Quality ensures products and processes meet standards. Reliability focuses on consistent performance over time. Maintainability refers to the ease of maintaining equipment. Quality circles in maintenance help solve work-related problems.
Building A Winning Maintenance Strategy
Guy Delahay, Owner and Managing Partner at Mainnovation Inc., discusses building a winning maintenance strategy through the use of the Value Driven Maintenance methodology, a state of the art framework that calculates economic added value of maintenance using Net Present Value techniques and industry specific maintenance benchmarks. Organizations that have embraced this practice have been able to achieve impressive results including:
30% Uptime Improvement
50% Cost Reduction
40% lower MRO stock value
View the slides to understand the steps invloved in building a winning maintenance strategy, such as understanding your Dominant Value Driver, utilizing KPI's and benchmarking, implementing Maintenance Best Practices, and exploring Value Drive Maintenance.
Maintenance management
Maintenance management involves planning, organizing, and directing resources to control the availability and performance of industrial plants. It aims to minimize downtime and repair costs while maximizing efficiency, prolonging asset life, and ensuring quality production. Effective maintenance management requires categorizing maintenance needs, prioritizing objectives like uptime and safety, and planning using approaches such as total productive maintenance which emphasizes prevention, employee involvement, and continuous improvement.
Maintenance management
Maintenance management aims to minimize equipment breakdowns and maximize asset availability for production. It involves planning and controlling maintenance activities to reduce overall costs. Preventive maintenance through periodic inspections and repairs helps anticipate failures, improve productivity and quality, and minimize accidents and repair costs compared to reactive breakdown maintenance. While preventive maintenance is more expensive initially, it has long-term benefits like increased equipment life, higher reliability, and reduced downtime.
Basics in Maintenance
This document discusses maintenance and methods for tracking losses and overcoming losses through proper maintenance activities. It defines maintenance as actions to retain or restore equipment to its maximum useful life. The three main types of maintenance are preventive, breakdown, and corrective. Preventive maintenance includes periodic and predictive maintenance. Periodic maintenance involves spare part replacement on a predefined schedule, while predictive maintenance uses equipment like bearing meters to determine condition-based maintenance. Metrics like mean time between failure (MTBF) and mean time to repair (MTTR) are discussed to measure equipment reliability and maintainability. Uptime is also defined as a percentage measure of up-time without downtime.
MAINTENANCE POLICIES – PREVENTIVE MAINTENANCE
Maintenance categories – Comparative merits of each category – Preventive maintenance, maintenance schedules, repair cycle - Principles and methods of lubrication – TPM
PRINCIPLES AND PRACTICES OF MAINTENANCE PLANNING
Basic Principles of maintenance planning – Objectives and principles of planned maintenance activity– Importance and benefits of sound Maintenance systems – Reliability and machine availability –MTBF, MTTR and MWT – Factors of availability – Maintenance organization – Maintenance economics.
What's hot (20)
Reliability and Maintenance in production Management
Reliability and Maintenance in production Management
Maintenance and Operation Management-Emergency Management System
Maintenance and Operation Management-Emergency Management System
Similar to Electrical System
a26e8dedece825e530c50c1240886cf0.pptx
Voltage sags and interruptions are short-duration reductions or losses of voltage caused by faults in the power system. They can negatively impact sensitive equipment like computers and motor drives. Solutions exist at multiple levels, from protecting individual small loads to implementing power conditioning technologies or backup power sources for entire facilities. The best approach depends on the critical equipment and process requirements.
Power system protection seminar report
The document provides an overview of substation protection devices. It acknowledges the importance of safety in electrical power systems and discusses several key components used in substation protection schemes: current transformers, potential transformers, protection relays, circuit breakers, lightning arresters, and isolators. The summary describes how these devices work together to detect faults and isolate only the faulty section of the system, maintaining power to the healthy sections.
Chandna seminar report 1421105031
This document is a seminar report on power system protection. It includes an introduction to power system protection and its objectives. It describes the key components of a protection system including current transformers, potential transformers, protective relays, circuit breakers, lightning arresters, and isolators. It provides details on the purpose and operation of each component. The document is submitted to fulfill the requirements for a bachelor's degree in electrical engineering.
MIS_Ch_1_for_studentsNew.pdf
This document provides an overview of instrument and system maintenance concepts including definitions of different types of maintenance such as corrective, preventive, and predictive maintenance. It discusses the need for maintenance and provides examples of tasks involved in each type. Preventive maintenance involves regular checks, inspections, and calibrations. Predictive maintenance uses advanced monitoring techniques to predict failures. The document also compares corrective and preventive maintenance as well as preventive and predictive maintenance. Finally, it outlines common troubleshooting techniques like logical analysis and divide and conquer.
MIS_Ch_1_for_studentsNew.pdf
This document provides an overview of instrument and system maintenance concepts including definitions of different types of maintenance such as corrective, preventive, and predictive maintenance. It discusses the need for maintenance and provides examples of tasks involved in each type. Preventive maintenance involves regular checks, inspections, and calibrations. Predictive maintenance uses advanced monitoring techniques to predict failures. The document also compares corrective and preventive maintenance as well as preventive and predictive maintenance. Finally, it outlines common troubleshooting techniques like logical analysis and divide and conquer.
AUTOMATIC METHOD OF PROTECTING TRANSFORMER USING PIC MICROCONTROLLER AS AN AL...
AUTOMATIC METHOD OF PROTECTING TRANSFORMER USING PIC MICROCONTROLLER AS AN AL...International Journal of Technical Research & Application
This paper describe the design and
implementation of an “Automatic method of protecting
transformer as an alternative to the fuse protection technique”.
The aim of this paper is to provide an alternative, effective,
efficient and more reliable method of protecting fault from
power transformer which may arose as a result of overload,
high temperature or a high input voltage. Generally, fault may
occur in transformers due to the stated reasons. To safeguard
the damage of the transformer with the aid and help of
microcontroller we monitor and control the entire circuitry.
Thereafter regarding the monitoring and control, information
about the operation of the parameters would be transmitted to a
personal computer for general monitoring and control, which
avoid the need of the lines men who had to go to the transformer
to re-fix fuses. Lastly, a working system was demonstrated to
authenticate the design and possible improvements were also
presented.INTRODUCTION OF MAINTENANCE.pptx
The document discusses various aspects of equipment maintenance including:
1. The importance of maintenance in maintaining operational efficiency and reducing breakdowns. Common types of maintenance include planned, corrective, and predictive maintenance.
2. Planned maintenance aims to prevent failures and includes running, scheduled, and shutdown maintenance. Corrective maintenance repairs equipment after failure while predictive maintenance predicts failures.
3. A effective maintenance program involves identifying equipment, scheduling inspections, documenting history, specifying jobs, and incorporating feedback to improve planning. Total productive maintenance strives to increase production through improved maintenance practices.
Plant maintenance basics
This document discusses plant maintenance basics. It defines a plant as a place where resources are brought together for manufacturing and defines maintenance as keeping a plant in good operating condition. The objectives of plant maintenance are to minimize breakdowns and keep the plant operating at lowest cost. Types of maintenance covered include corrective, scheduled, preventive, and predictive maintenance. Key performance indicators discussed for evaluating equipment include MTBF, MTTR, and availability.
protectionsettings-120425102109-phpapp01.ppt
The document discusses power system protection settings. It describes the functions of protective relays and equipment protection, and the information required to calculate protection settings. The protection settings process involves calculating settings, checking them, and implementing them. Protective relays use functional elements like protection, control, and timing elements. Distance, overcurrent, and directional protection elements are described.
protectionsettings-120425102109-phpapp01.ppt
The document discusses power system protection settings. It describes the functions of protective relays and equipment protection, and the information required to calculate protection settings. The protection settings process involves calculating settings, checking them, and implementing them. Protective relays use functional elements, and have operating characteristics like overcurrent, directional, and distance protection. Settings must coordinate protection across the system.
Imaging Lecture on maintaining medical Equipment
The document discusses maintenance of biomedical equipment, defining maintenance and describing types of maintenance activities. It outlines objectives of maintenance like maximizing production and minimizing costs. Preventative maintenance is emphasized for reducing risks and protecting investments. Different levels of maintenance are described based on expertise required. The full lifecycle of medical equipment management is illustrated in a diagram, emphasizing safety throughout use. Various electrical and clinical safety hazards are outlined.
Health Monitoring of Industrial and Electrical Equipment
It Detects if motor, generator or any Industrial Equipments having any faults,
excess heating and more vibration. Then sound up alarm to minimize the problems
G225159
This document presents a mathematical model for assessing the reliability of 250-5000 watt pulse width modulation (PWM) power inverters in Nigeria. The part stress method is used to predict reliability by considering factors like environmental conditions, power supply quality, and human factors. Reliability data on PWM inverters in Sokoto, Nigeria is analyzed and compared to the expected reliability in China where they were designed. The results show lower reliability for the inverters in Nigeria due to differences in the operating environment compared to China. Key equations for mean time between failures and failure rate are presented to calculate reliability metrics.
Planned Preventive Ambulance Medical Equipment Maintenance
The document outlines guidelines for establishing an effective planned preventive maintenance system for medical equipment, including taking an inventory of all equipment, defining maintenance tasks, establishing maintenance intervals, assigning personnel responsibilities, and developing a reminder system to ensure equipment is properly maintained. It also discusses the types of test equipment that should be available to technicians to test and calibrate medical devices.
Power System Protection
This document discusses power system protection settings. It begins by introducing the functions of protective relays and the information needed to calculate settings, such as line parameters, transformer parameters, fault studies results, and CT and VT ratios. It then describes the protection settings process and functional elements of protective relays. The document discusses the operating characteristics of overcurrent, directional, and distance protection elements. It explains concepts like current grading, time grading, and directional elements as they relate to achieving selectivity in protection schemes. Finally, it provides more details on distance protection principles and operating characteristics.
Always Switched on
The document discusses regulations in Germany regarding safety testing of electrical equipment. It explains that the BetrSichV ordinance requires regular safety testing, including insulation resistance tests, to ensure safe operation over the long term. Continuous monitoring systems now allow insulation resistance to be monitored without shutting down power, by measuring residual currents in earthed systems or insulation resistance in unearthed systems. This permits electricians to determine customized testing intervals based on installation usage and safety, increasing availability while efficiently ensuring safety.
Prueba eléctrica de motores y generadores eléctricos - Calidad de Energía el...
This document discusses maintenance testing of electrical motors/generators. It describes various electrical tests that can be performed, including measurements of capacitance and dissipation factor, partial discharge testing, and online partial discharge monitoring. Specific equipment is listed that can be used to perform tests of capacitance, dissipation factor, partial discharge detection and monitoring. Procedures for performing each test are provided. The tests help evaluate insulation condition and detect faults to prevent failures of rotating electrical machines.
Maintenance Management (presentation)
Maintenance management involves keeping equipment running at high capacity and low cost through a set of organized activities. The objectives of maintenance include efficient use of personnel, maximizing equipment life, reliability, quality, safety and minimizing costs and interruptions. There are various types of maintenance like preventive, corrective, and predictive. Preventive maintenance involves scheduled, running and shutdown maintenance to prevent failures. Corrective maintenance repairs equipment after failure through breakdown or shutdown maintenance. Predictive maintenance predicts failures through condition monitoring.
Maintenance
The document discusses plant maintenance procedures. It defines maintenance as finding faults in equipment before or after breakdown to maintain operational efficiency. The objectives of maintenance are to increase reliability, maximize equipment life, maximize production capacity, and minimize costs and interruptions. Maintenance types include planned (preventive, corrective, predictive), and unplanned. Key steps in preventive maintenance procedures are identifying equipment, creating schedules, history cards, job specifications, programming, inspections, and applying feedback.
Estimating Reliability of Power Factor Correction Circuits: A Comparative Study
Reliability plays an important role in power supplies, as every power supply is the very heart of every electronics equipment. For other electronic equipment, a certain failure mode, at least for a part of the total system, can often be tolerated without serious (critical) after effects. However, for the power supply no such condition can be accepted, since very high demands on the reliability must be achieved. At higher power levels, the CCM boost converter is preferred topology for implementation a front end with PFC. As a result significant efforts have been made to improve the performance of high boost converter. This paper is one the effort for improving the performance of the converter from the reliability point of view. In this paper a boost power factor correction converter is simulated with single switch and interleaving technique in CCM, DCM and CRM modes under different output power ratings and the reliability. Results of the converter are explored from reliability point of view.
Similar to Electrical System (20)
AUTOMATIC METHOD OF PROTECTING TRANSFORMER USING PIC MICROCONTROLLER AS AN AL...
AUTOMATIC METHOD OF PROTECTING TRANSFORMER USING PIC MICROCONTROLLER AS AN AL...
Health Monitoring of Industrial and Electrical Equipment
Health Monitoring of Industrial and Electrical Equipment
Planned Preventive Ambulance Medical Equipment Maintenance
Planned Preventive Ambulance Medical Equipment Maintenance
Prueba eléctrica de motores y generadores eléctricos - Calidad de Energía el...
Prueba eléctrica de motores y generadores eléctricos - Calidad de Energía el...
Estimating Reliability of Power Factor Correction Circuits: A Comparative Study
Estimating Reliability of Power Factor Correction Circuits: A Comparative Study
Recently uploaded
Building a Raspberry Pi Robot with Dot NET 8, Blazor and SignalR - Slides Onl...
In this session delivered at Leeds IoT, I talk about how you can control a 3D printed Robot Arm with a Raspberry Pi, .NET 8, Blazor and SignalR.
I also show how you can use a Unity app on an Meta Quest 3 to control the arm VR too.
You can find the GitHub repo and workshop instructions here;
https://bit.ly/dotnetrobotgithub
一比一原版(ANU文凭证书)澳大利亚国立大学毕业证如何办理
加急办理国外文凭【微信:176555708】【(ANU毕业证书)澳大利亚国立大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(Adelaide文凭证书)阿德莱德大学毕业证如何办理
学校原版办理海外认证【微信:176555708】【(Adelaide毕业证书)阿德莱德大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
按照学校原版(Adelaide文凭证书)阿德莱德大学毕业证快速办理
怎样办理复制【微信:176555708】【(Adelaide毕业证书)阿德莱德大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
按照学校原版(UOL文凭证书)利物浦大学毕业证快速办理
一比一办理办理毕业证【微信:176555708】【(UOL毕业证书)利物浦大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
按照学校原版(AU文凭证书)英国阿伯丁大学毕业证快速办理
出售毕业典礼【微信:176555708】【(AU毕业证书)英国阿伯丁大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(UMich毕业证)密歇根大学|安娜堡分校毕业证如何办理
UMich硕士学位证成绩单【微信95270640】做UMich文凭、办UMich文凭、买UMich文凭Q微信95270640买办国外文凭UMich毕业证买学历咨询/代办美国毕业证成绩单文凭、办澳洲文凭毕业证、办加拿大大学毕业证文凭英国毕业证学历认证-毕业证文凭成绩单、假文凭假毕业证假学历书制作仿制、改成绩、教育部学历学位认证、毕业证、成绩单、文 凭、UMich学历文凭、UMich假学位证书、毕业证文凭、、文凭毕业证、毕业证认证、留服认证、使馆认证、使馆证明 、使馆留学回国人员证明、留学生认证、学历认证、文凭认证、学位认证
[留学文凭学历认证(留信认证使馆认证)密歇根大学|安娜堡分校毕业证成绩单毕业证证书大学Offer请假条成绩单语言证书国际回国人员证明高仿教育部认证申请学校等一切高仿或者真实可查认证服务。
多年留学服务公司,拥有海外样板无数能完美1:1还原海外各国大学degreeDiplomaTranscripts等毕业材料。海外大学毕业材料都有哪些工艺呢？工艺难度主要由：烫金.钢印.底纹.水印.防伪光标.热敏防伪等等组成。而且我们每天都在更新海外文凭的样板以求所有同学都能享受到完美的品质服务。
国外毕业证学位证成绩单办理方法：
1客户提供办理密歇根大学|安娜堡分校密歇根大学|安娜堡分校毕业证假文凭信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
— — — — 我们是挂科和未毕业同学们的福音我们是实体公司精益求精的工艺！ — — — -
一真实留信认证的作用(私企外企荣誉的见证):
1：该专业认证可证明留学生真实留学身份同时对留学生所学专业等级给予评定。
2：国家专业人才认证中心颁发入库证书这个入网证书并且可以归档到地方。
3：凡是获得留信网入网的信息将会逐步更新到个人身份内将在公安部网内查询个人身份证信息后同步读取人才网入库信息。
4：个人职称评审加20分个人信誉贷款加10分。
5：在国家人才网主办的全国网络招聘大会中纳入资料供国家500强等高端企业选择人才。听话天天呆在小屋里除了看书写作业就是睡觉看电视屋里很黑很闷白天也得开灯开风扇山娃不想浪费电总将小方桌搁在门口看书写作业有一次山娃坐在门口写作业写着写着竟伏在桌上睡着了迷迷糊糊中山娃似乎听到了父亲的脚步声当他晃晃悠悠站起来时才诧然发现一位衣衫破旧的妇女挎着一只硕大的蛇皮袋手里拎着长铁钩正站在门口朝黑色的屋内张望不好坏人小偷山娃一怔却也灵机一动立马仰起头双手拢在嘴边朝楼上大喊：“爸爸爸——有人找——喜
按照学校原版(UVic文凭证书)维多利亚大学毕业证快速办理
不能毕业办理文凭'毕业证购买'【微信:176555708】【(UVic毕业证书)维多利亚大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
按照学校原版(KCL文凭证书)伦敦国王学院毕业证快速办理
咨询办理ps毕业证【微信:176555708】【(KCL毕业证书)伦敦国王学院毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
按照学校原版(Birmingham文凭证书)伯明翰大学|学院毕业证快速办理
加急购买全套证件文凭【微信:176555708】【(Birmingham毕业证书)伯明翰大学|学院毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
按照学校原版(USD文凭证书)圣地亚哥大学毕业证快速办理
官方原版办理成绩单ps【微信:176555708】【(USD毕业证书)圣地亚哥大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(Greenwich文凭证书)格林威治大学毕业证如何办理
毕业原版【微信:176555708】【(Greenwich毕业证书)格林威治大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
1比1复刻澳洲皇家墨尔本理工大学毕业证本科学位原版一模一样
原版一模一样【微信：741003700 】【澳洲皇家墨尔本理工大学毕业证本科学位】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
按照学校原版(UST文凭证书)圣托马斯大学毕业证快速办理
精仿办理本科毕业证【微信:176555708】【(UST毕业证书)圣托马斯大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
按照学校原版(UAL文凭证书)伦敦艺术大学毕业证快速办理
出售假学位证【微信:176555708】【(UAL毕业证书)伦敦艺术大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
LORRAINE ANDREI_LEQUIGAN_GOOGLE CALENDAR
Google Calendar is a versatile tool that allows users to manage their schedules and events effectively. With Google Calendar, you can create and organize calendars, set reminders for important events, and share your calendars with others. It also provides features like creating events, inviting attendees, and accessing your calendar from mobile devices. Additionally, Google Calendar allows you to embed calendars in websites or platforms like SlideShare, making it easier for others to view and interact with your schedules.
一比一原版(KCL文凭证书)伦敦国王学院毕业证如何办理
毕业原版【微信:176555708】【(KCL毕业证书)伦敦国王学院毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(UCSB毕业证)圣塔芭芭拉社区大学毕业证如何办理
UCSB毕业证文凭证书【微信95270640】☀《圣塔芭芭拉社区大学毕业证购买》Q微信95270640《UCSB毕业证可查真实》文凭、本科、硕士、研究生学历都可以做,留信认证的作用：
1：该专业认证可证明留学生真实留学身份。
2：同时对留学生所学专业等级给予评定。
3：国家专业人才认证中心颁发入库证书
4：这个入网证书并且可以归档到地方
5：凡是获得留信网入网的信息将会逐步更新到个人身份内，将在网内查询个人身份证信息后，同步读取人才网入库信息。
6：个人职称评审加20分。
7：个人信誉贷款加10分。
8：在国家人才网主办的全国网络招聘大会中纳入资料，供国家500强等高端企业选择人才《文凭UCSB毕业证书原版制作UCSB成绩单》仿制UCSB毕业证成绩单圣塔芭芭拉社区大学学位证书pdf电子图》。
如果您是以下情况，我们都能竭诚为您解决实际问题：【公司采用定金+余款的付款流程，以最大化保障您的利益，让您放心无忧】
1、在校期间，因各种原因未能顺利毕业，拿不到官方毕业证+微信95270640
2、面对父母的压力，希望尽快拿到圣塔芭芭拉社区大学圣塔芭芭拉社区大学本科毕业证成绩单；
3、不清楚流程以及材料该如何准备圣塔芭芭拉社区大学圣塔芭芭拉社区大学本科毕业证成绩单；
4、回国时间很长，忘记办理；
5、回国马上就要找工作，办给用人单位看；
6、企事业单位必须要求办理的；
面向美国乔治城大学毕业留学生提供以下服务:
【★圣塔芭芭拉社区大学圣塔芭芭拉社区大学本科毕业证成绩单毕业证、成绩单等全套材料，从防伪到印刷，从水印到钢印烫金，与学校100%相同】
【★真实使馆认证（留学人员回国证明），使馆存档可通过大使馆查询确认】
【★真实教育部认证，教育部存档，教育部留服网站可查】
【★真实留信认证，留信网入库存档，可查圣塔芭芭拉社区大学圣塔芭芭拉社区大学本科毕业证成绩单】
我们从事工作十余年的有着丰富经验的业务顾问，熟悉海外各国大学的学制及教育体系，并且以挂科生解决毕业材料不全问题为基础，为客户量身定制1对1方案，未能毕业的回国留学生成功搭建回国顺利发展所需的桥梁。我们一直努力以高品质的教育为起点，以诚信、专业、高效、创新作为一切的行动宗旨，始终把“诚信为主、质量为本、客户第一”作为我们全部工作的出发点和归宿点。同时为海内外留学生提供大学毕业证购买、补办成绩单及各类分数修改等服务；归国认证方面，提供《留信网入库》申请、《国外学历学位认证》申请以及真实学籍办理等服务，帮助众多莘莘学子实现了一个又一个梦想。
专业服务，请勿犹豫联系我
如果您真实毕业回国，对于学历认证无从下手，请联系我，我们免费帮您递交
诚招代理：本公司诚聘当地代理人员，如果你有业余时间，或者你有同学朋友需要，有兴趣就请联系我
你赢我赢，共创双赢
你做代理，可以帮助圣塔芭芭拉社区大学同学朋友
你做代理，可以拯救圣塔芭芭拉社区大学失足青年
你做代理，可以挽救圣塔芭芭拉社区大学一个个人才
你做代理，你将是别人人生圣塔芭芭拉社区大学的转折点
你做代理，可以改变自己，改变他人，给他人和自己一个机会娃于是天天扳着手指算计着读书也格外刻苦无奈时间总过得太慢太慢每次父亲往家打电话山娃总抢着接听一个劲地提醒父亲别忘了正月说的话电话那头总会传来父亲嘿嘿的笑连连说记得记得但别忘了拿奖状进城啊考试一结束山娃就迫不及待地给父亲挂电话：爸我拿奖了三好学生接我进城吧父亲果然没有食言第二天就请假回家接山娃离开爷爷奶奶的那一刻山娃又伤心得泪如雨下宛如军人奔赴前线般难舍和悲壮卧空调大巴挤长蛇列车山娃发现车上挤满了乡
按照学校原版(QU文凭证书)皇后大学毕业证快速办理
补办学校邮寄信封【微信:176555708】【(QU毕业证书)皇后大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Recently uploaded (20)
Building a Raspberry Pi Robot with Dot NET 8, Blazor and SignalR - Slides Onl...
Building a Raspberry Pi Robot with Dot NET 8, Blazor and SignalR - Slides Onl...
Production.pptxd dddddddddddddddddddddddddddddddddd
Production.pptxd dddddddddddddddddddddddddddddddddd
Electrical System
- 1. TRAINING ON ELECTRICAL SYSTEM
- 18. Types of Maintenance MAINTENANCE UNPLANNED MAINTENANCE (REACTIVE) BREAKDOWN EMERGENCY PLANNED MAINTENANCE (PROACTIVE) PREDECTIVE MAINTENANCE CONDITION - BASED STATISTICAL - BASED PREVENTIVE MAINTENANCE ROUTINE RUNNING WINDOW SHUTDOWN PREVENTIVE OPPORTU-NITY
- 29. THANK YOU