Electrical safety
•Download as PPTX, PDF•
0 likes•193 views
Electric current from various cables and power sources can be hazardous and cause injury or equipment damage. To avoid this, disconnect all power cords, telecommunications systems, and networks before opening covers on servers or workstations, unless instructed otherwise. As an additional precaution, always disconnect all power by unplugging the power cord before performing any mechanical inspections, working near power supplies, or removing/installing main units. Never assume a circuit is safe - always double check it has been powered off. Be aware of potential electrical hazards like moist floors or non-grounded extension cables. If an accident occurs, switch off power and send for medical assistance.
Report
Share
Report
Share
Recommended
saftey
This document discusses electrical safety hazards in the office and provides solutions to address them. It identifies hazards such as damaged extension leads, inserting objects into office machines, faulty appliances, and overloading outlets. To address these, it recommends securing extension leads, following safe procedures for clearing jams, inspecting and tagging appliances, and discouraging the overuse of adapters. The document also lists general electrical hazards like currents being invisible, unqualified work, and working in wet or confined spaces.
4. case studies on electrical maintanance
This case study examines electrical maintenance accidents and identifies common causes. It describes several real incidents where workers were injured or killed by electric shocks. Many accidents occurred because workers lacked adequate training, supervision, or risk assessment. Other contributing factors included unsafe work procedures, lack of equipment isolation, improper live working, unsuitable test equipment, and failure to properly manage or control electrical work activities.
Construction electrical safety
This document provides an introduction to electrical safety for stonemasons. It discusses various methods for supplying power on construction sites, including battery tools, generators, and mains power through transformers. It emphasizes the importance of using the proper cables and ensuring equipment is rated for the correct voltage. Safety devices like residual current devices (RCDs) and junction boxes are also outlined. The document provides guidance on inspecting equipment and outlines common electrical injuries and safety tips for working with electricity.
Be prepared electrical safety
This document outlines several electrical safety precautions to observe when working with electricity. It recommends keeping generators outside to avoid dangerous fumes, turning them off before refueling, and staying 3 meters away from overhead power lines. Extension cables should not be modified and only factory-assembled cables used with strain relief. All electrical equipment should be visually inspected before use and any damaged items removed from service to prevent insulation breaks or exposed wires. Proper earthing of power supply systems and frequent inspection of electrical systems can help avoid injuries from electrical incidents.
Construction Electrical Safety
This document provides an overview of electrical safety when working on a construction site. It discusses the different methods of supplying power, including batteries, generators, and mains electricity. It emphasizes the importance of using the proper cables matched to the correct voltage and checking equipment regularly. Signs are used to identify electrical hazards. The document outlines potential electrical injuries like shocks and burns and stresses working safely, such as inspections, correct equipment, and not working alone or in water when using electricity.
Electrical Safety In The Workplace
Checkout OSHA's workplace electrical safety guidelines that both employee and employer should be aware of. Make your facility safer with Current Solutions PC's workplace electrical safety program that protects your facility and employees against all sorts of electrical hazards. Visit www.CurrentSolutionsPC.com now.
City & Guilds Electrical - Multiple Choice
The document contains multiple choice questions about electrical safety and principles. It covers topics like the roles and responsibilities of a safety representative, efficiency calculations for electric machines, penalty clauses in contracts, components of DC generators, hazards of carbon dioxide exposure, fire extinguisher markings, sources of safety advice, back EMF in DC motors, units of resistivity, risk assessment procedures, capacitor connections in single phase motors, data protection laws, when risk assessments should be conducted, coordinating work schedules, types of protection devices, reactance calculations, induction motor components, fuse functions, capacitor operation, transistor modes, power calculations for inductors, sources of leakage currents, effects of excitation on AC generators, losses in DC machines, centrifugal switch purposes
Occupational Health And Safety - Electrical Equipment In The Workplace
This document discusses electrical safety in an office setting. It outlines potential electrical safety issues like clearing jams in office machines, liquid spills on appliances, faulty extension cords, and overloading outlets. It then provides solutions such as following safe procedures for clearing jams, keeping liquids away from electronics, having appliances inspected regularly, using extension cords temporarily, and installing larger outlets if more appliances are needed permanently. Potential electrical hazards are highlighted with examples of a pirate captain who was "hit by electricity."
Recommended
saftey
This document discusses electrical safety hazards in the office and provides solutions to address them. It identifies hazards such as damaged extension leads, inserting objects into office machines, faulty appliances, and overloading outlets. To address these, it recommends securing extension leads, following safe procedures for clearing jams, inspecting and tagging appliances, and discouraging the overuse of adapters. The document also lists general electrical hazards like currents being invisible, unqualified work, and working in wet or confined spaces.
4. case studies on electrical maintanance
This case study examines electrical maintenance accidents and identifies common causes. It describes several real incidents where workers were injured or killed by electric shocks. Many accidents occurred because workers lacked adequate training, supervision, or risk assessment. Other contributing factors included unsafe work procedures, lack of equipment isolation, improper live working, unsuitable test equipment, and failure to properly manage or control electrical work activities.
Construction electrical safety
This document provides an introduction to electrical safety for stonemasons. It discusses various methods for supplying power on construction sites, including battery tools, generators, and mains power through transformers. It emphasizes the importance of using the proper cables and ensuring equipment is rated for the correct voltage. Safety devices like residual current devices (RCDs) and junction boxes are also outlined. The document provides guidance on inspecting equipment and outlines common electrical injuries and safety tips for working with electricity.
Be prepared electrical safety
This document outlines several electrical safety precautions to observe when working with electricity. It recommends keeping generators outside to avoid dangerous fumes, turning them off before refueling, and staying 3 meters away from overhead power lines. Extension cables should not be modified and only factory-assembled cables used with strain relief. All electrical equipment should be visually inspected before use and any damaged items removed from service to prevent insulation breaks or exposed wires. Proper earthing of power supply systems and frequent inspection of electrical systems can help avoid injuries from electrical incidents.
Construction Electrical Safety
This document provides an overview of electrical safety when working on a construction site. It discusses the different methods of supplying power, including batteries, generators, and mains electricity. It emphasizes the importance of using the proper cables matched to the correct voltage and checking equipment regularly. Signs are used to identify electrical hazards. The document outlines potential electrical injuries like shocks and burns and stresses working safely, such as inspections, correct equipment, and not working alone or in water when using electricity.
Electrical Safety In The Workplace
Checkout OSHA's workplace electrical safety guidelines that both employee and employer should be aware of. Make your facility safer with Current Solutions PC's workplace electrical safety program that protects your facility and employees against all sorts of electrical hazards. Visit www.CurrentSolutionsPC.com now.
City & Guilds Electrical - Multiple Choice
The document contains multiple choice questions about electrical safety and principles. It covers topics like the roles and responsibilities of a safety representative, efficiency calculations for electric machines, penalty clauses in contracts, components of DC generators, hazards of carbon dioxide exposure, fire extinguisher markings, sources of safety advice, back EMF in DC motors, units of resistivity, risk assessment procedures, capacitor connections in single phase motors, data protection laws, when risk assessments should be conducted, coordinating work schedules, types of protection devices, reactance calculations, induction motor components, fuse functions, capacitor operation, transistor modes, power calculations for inductors, sources of leakage currents, effects of excitation on AC generators, losses in DC machines, centrifugal switch purposes
Occupational Health And Safety - Electrical Equipment In The Workplace
This document discusses electrical safety in an office setting. It outlines potential electrical safety issues like clearing jams in office machines, liquid spills on appliances, faulty extension cords, and overloading outlets. It then provides solutions such as following safe procedures for clearing jams, keeping liquids away from electronics, having appliances inspected regularly, using extension cords temporarily, and installing larger outlets if more appliances are needed permanently. Potential electrical hazards are highlighted with examples of a pirate captain who was "hit by electricity."
Electrical safety in construction
This document discusses electrical safety in construction. It notes that electrical safety is important due to the hidden dangers of electricity and risk of fire or electrocution. Two main electrical hazards are contact with live parts and heat generated from improper installations. Proper design of electrical facilities is needed to provide protection against direct and indirect contact, thermal effects, over/under currents, and overvoltage. Regulations and standards like the Indian Electricity Act and National Electrical Code establish safety rules that all installations must follow. Ten safety commandments and guidelines are also outlined.
Complete Guide to Electrical Safety in the Workplace
This document provides a guide to electrical safety in the workplace. It discusses the importance of electrical safety to prevent hazards and injuries. Some common electrical injuries at work include equipment that is poorly installed or maintained, dangerous wiring, overloaded outlets, incorrect fuses, and using electrical equipment near water. It provides tips to prevent electric hazards, such as not overloading outlets, using properly grounded equipment, minimizing extension cords, unplugging machines before repair work, avoiding water and electricity, and providing safety training to employees.
Electrical safety & its needs
The document discusses electrical safety and provides definitions of key safety and electrical terminology. It outlines several hazards of electricity like inadequate wiring or exposed parts. Electrical accidents can be caused by touching live wires or faulty equipment. Electric current passing through the body can cause painful shocks or organ failure depending on the voltage and current. Procedures for rescuing someone receiving a shock include switching off power, calling a doctor, and providing artificial respiration. Fires can be caused by short circuits or overheating damaging insulation. Proper equipment ratings, good earthing, and insulation are recommended to prevent electrical fires.
Electrical safety control panel
An employee received an electric shock and burns to the shoulder when he slipped and fell against a 120-volt terminal while reaching into an open electrical control panel to replace a broken cotter pin. The document discusses the hazards of electricity, including that as little as 50 milliamperes can cause death. It was determined that the incident occurred because safety lockout procedures were not followed to de-energize the panel before the employee reached inside, and that the employee's complacency likely contributed since he had performed the procedure before without incident. The document stresses that electrical panels should never be accessed while energized and only qualified workers following proper lockout procedures are permitted to work on live electrical equipment.
Electrical safety
This document provides training on electrical safety. It outlines responsibilities for management and employees to identify electrical hazards and prevent accidents. Hazards of electricity include shock, burns, arc blasts, explosions and fires. Electrical accidents are caused by unsafe equipment, environments and practices. Safe work practices like using protective equipment and following lockout/tagout procedures can prevent accidents. The key messages are that electricity can be deadly if misused but the risk is negligible if sensible precautions are taken.
Electrical safety
Safety is a systematic approach to prevent accidents from failures in work parameters by taking precautions to identify and control electrical hazards. We need safety to protect lives, electrical equipment from damage, and property from fire. Safety equipment includes gloves rated for different voltages, helmets, safe jackets, fire extinguishers, and removing damaged equipment from service. Precautions include keeping equipment away from water, removing plugs by the base, not wearing metal objects, and ensuring licensed electricians perform electrical work. Electricity can be deadly if improperly used.
All About Workplace Electrical Safety
Every year, more than 300 deaths and 4000 injuries are recorded as a result of workplace electrical hazard. Find out, all you need to know about workplace hazards and basic electrical safety practices.
Electrical safety ppt
The document discusses electrical safety. It defines electricity and its forms, electrical materials like conductors and insulators, and how electricity works by flowing through circuits. It describes the effects of electricity on the human body like electrical shocks and injuries. It emphasizes the importance of electrical safety and outlines safety practices like using personal protective equipment, lockout/tagout procedures, inspections, grounding, and being qualified for different electrical work. The document provides guidelines for working safely around electricity.
Electrical hazards and safety by Sai Chaithanya Sharma
This presentation discusses electricity, electrical hazards, and safety practices. It covers topics such as what electricity is, direct and alternating current, the magnetic, heating, and chemical effects of electricity, common electrical hazards like shocks, explosions, burns and fires. The presentation emphasizes safety measures like using personal protective equipment, avoiding overloading circuits, and not allowing children or pets to play with electricity. Proper precautions and treating electricity with respect can help ensure its safe and effective use.
Electrical safety ppt(1)
This document provides information on electrical safety. It discusses:
1. The basics of electricity including voltage, current, circuits, and conductors vs insulators.
2. Electrical hazards such as shock, arcs, ground faults, and faulty equipment.
3. How to protect yourself from electricity through lockout/tagout procedures, inspections, grounding programs, and PPE.
4. Classification of hazardous gas and dust areas and the requirements for electrical equipment in each area.
Electrical safety ppt
This document discusses electrical safety and hazards. It outlines various electrical hazards including improper grounding, exposed parts, loose connections, improper appliance use, inadequate wiring, damaged insulation, wet conditions, and contact with power lines. Side effects of electricity include arc flashes/blasts, fires, and explosions. Effects on humans include loss of consciousness, spasms, burns, irregular heartbeats, disability, and death. General safety measures include lockout/tagout procedures, protective equipment, tidy work areas, training, and precautions during hot works like welding. Temporary electrification and environmental hazards are also addressed along with providing the proper fire extinguishers.
Electrical Safety for the Non-Electrical Skilled Worker by EFCOG
This document provides training for non-electrical skilled workers on recognizing and mitigating electrical hazards in the workplace. It reviews basic electrical safety training, defines who is considered a non-electrical skilled worker, and discusses requirements from the Department of Energy (DOE) and National Fire Protection Association (NFPA) standard 70E. The training then covers specific electrical hazards like shock, arc, and blast exposure and how to protect against these using lockout/tagout procedures. It provides guidance on safety-related equipment and work practices like using ground fault circuit interrupters (GFCIs), circuit breaker tripping, cord and tool inspection, ladder safety, and battery hazards and precautions.
Basic Burn Safety Training
The document provides information on basic electrical safety. It discusses fundamentals like how electricity flows and the effects of electrical current on the human body. It outlines electrical hazards like electrocution and burns. The document also gives guidelines for safe work practices around electrical equipment and defines some key electrical terms.
4.4 form 4 dangers of electricity
This document discusses electrical hazard awareness and safety. It notes that electrical hazards can cause injury, death, fires or property damage. Some key electrical hazards include making contact with overhead power lines, working on live equipment, and using damaged electrical tools. The document provides guidance on responding to electrical incidents, types of electrical injuries, and measures to protect oneself from electricity such as turning off the power source, wearing appropriate clothing and using qualified personnel. It emphasizes taking precautions and following safety procedures to avoid electrical hazards.
Electrical Safety Tips
Online Electrical Courses addresses electrical safety tips requirements that are necessary for safety and includes why electricity is dangerous and how it works.
Electrical Safety in public places
It includes general information about safety, cause behind safety, safety rules and way of acquiring safety
Electrical safety training based on osha 1910 standards sw
OSHA standards, Hazard Identification, PPE, Safety, Safe working practices, Electrical hazards and causes, Osha 1910.301, Employee responsibility, statistical quality and safety training
Electrical safety
This document discusses electrical safety and hazards. It notes that electricity can cause serious injuries or death if safety precautions are not followed. The most common electrical injuries are electrical shock, electrocution, burns, and falls. Electrical hazards include exposed parts, overloaded circuits, defective insulation, improper grounding, damaged tools, overhead power lines, and wet conditions. The document provides tips for staying safe such as inspecting tools, avoiding overloads, staying away from live wires, unplugging safely, avoiding jewelry or metal near equipment, using safe work practices, receiving training, and following lockout/tagout procedures.
Hawkins Contracting Electrical Safety in Construction
This document provides an overview of electrical safety topics for construction workers, including general electrical safety, overhead hazards, underground hazards, portable generator safety, extension cord safety, and power tool safety. It notes that from 2001-2015 in Ontario, there were 253 electrical fatalities related to construction work, with over half due to utility contact. The document outlines required minimum distances for overhead power lines and safety procedures for working around underground lines after locating. It provides guidelines for safe use of portable generators, extension cords, and power tools on construction sites.
Unit c electrical principals & technologies notes(electrical saftey)
This document discusses electrical safety and the dangers of electric shock. It explains that while high voltage can be dangerous, high amperage is even more so, as little as 0.1 amps can kill a person. The document outlines 7 steps for electrical safety, including keeping devices dry, not using damaged cords, unplugging before repairs, and not overloading outlets. It also describes safety devices like grounded plugs and circuit breakers that help prevent electric shocks.
Fabian Aman
Fabian Aman has over 10 years of experience in vehicle ordering and pricing at Arabian Gulf Mechanical Centre in Dubai. He specialized in strategizing BMW's product pricing and positioning in the GCC market to maximize profits and ensure market leadership. His skills include import processes, BMW specifications, pricing analysis, and managing relationships. He holds a BSc in Computer Science and professional certifications in Windows Server.
More Related Content
What's hot
Electrical safety in construction
This document discusses electrical safety in construction. It notes that electrical safety is important due to the hidden dangers of electricity and risk of fire or electrocution. Two main electrical hazards are contact with live parts and heat generated from improper installations. Proper design of electrical facilities is needed to provide protection against direct and indirect contact, thermal effects, over/under currents, and overvoltage. Regulations and standards like the Indian Electricity Act and National Electrical Code establish safety rules that all installations must follow. Ten safety commandments and guidelines are also outlined.
Complete Guide to Electrical Safety in the Workplace
This document provides a guide to electrical safety in the workplace. It discusses the importance of electrical safety to prevent hazards and injuries. Some common electrical injuries at work include equipment that is poorly installed or maintained, dangerous wiring, overloaded outlets, incorrect fuses, and using electrical equipment near water. It provides tips to prevent electric hazards, such as not overloading outlets, using properly grounded equipment, minimizing extension cords, unplugging machines before repair work, avoiding water and electricity, and providing safety training to employees.
Electrical safety & its needs
The document discusses electrical safety and provides definitions of key safety and electrical terminology. It outlines several hazards of electricity like inadequate wiring or exposed parts. Electrical accidents can be caused by touching live wires or faulty equipment. Electric current passing through the body can cause painful shocks or organ failure depending on the voltage and current. Procedures for rescuing someone receiving a shock include switching off power, calling a doctor, and providing artificial respiration. Fires can be caused by short circuits or overheating damaging insulation. Proper equipment ratings, good earthing, and insulation are recommended to prevent electrical fires.
Electrical safety control panel
An employee received an electric shock and burns to the shoulder when he slipped and fell against a 120-volt terminal while reaching into an open electrical control panel to replace a broken cotter pin. The document discusses the hazards of electricity, including that as little as 50 milliamperes can cause death. It was determined that the incident occurred because safety lockout procedures were not followed to de-energize the panel before the employee reached inside, and that the employee's complacency likely contributed since he had performed the procedure before without incident. The document stresses that electrical panels should never be accessed while energized and only qualified workers following proper lockout procedures are permitted to work on live electrical equipment.
Electrical safety
This document provides training on electrical safety. It outlines responsibilities for management and employees to identify electrical hazards and prevent accidents. Hazards of electricity include shock, burns, arc blasts, explosions and fires. Electrical accidents are caused by unsafe equipment, environments and practices. Safe work practices like using protective equipment and following lockout/tagout procedures can prevent accidents. The key messages are that electricity can be deadly if misused but the risk is negligible if sensible precautions are taken.
Electrical safety
Safety is a systematic approach to prevent accidents from failures in work parameters by taking precautions to identify and control electrical hazards. We need safety to protect lives, electrical equipment from damage, and property from fire. Safety equipment includes gloves rated for different voltages, helmets, safe jackets, fire extinguishers, and removing damaged equipment from service. Precautions include keeping equipment away from water, removing plugs by the base, not wearing metal objects, and ensuring licensed electricians perform electrical work. Electricity can be deadly if improperly used.
All About Workplace Electrical Safety
Every year, more than 300 deaths and 4000 injuries are recorded as a result of workplace electrical hazard. Find out, all you need to know about workplace hazards and basic electrical safety practices.
Electrical safety ppt
The document discusses electrical safety. It defines electricity and its forms, electrical materials like conductors and insulators, and how electricity works by flowing through circuits. It describes the effects of electricity on the human body like electrical shocks and injuries. It emphasizes the importance of electrical safety and outlines safety practices like using personal protective equipment, lockout/tagout procedures, inspections, grounding, and being qualified for different electrical work. The document provides guidelines for working safely around electricity.
Electrical hazards and safety by Sai Chaithanya Sharma
This presentation discusses electricity, electrical hazards, and safety practices. It covers topics such as what electricity is, direct and alternating current, the magnetic, heating, and chemical effects of electricity, common electrical hazards like shocks, explosions, burns and fires. The presentation emphasizes safety measures like using personal protective equipment, avoiding overloading circuits, and not allowing children or pets to play with electricity. Proper precautions and treating electricity with respect can help ensure its safe and effective use.
Electrical safety ppt(1)
This document provides information on electrical safety. It discusses:
1. The basics of electricity including voltage, current, circuits, and conductors vs insulators.
2. Electrical hazards such as shock, arcs, ground faults, and faulty equipment.
3. How to protect yourself from electricity through lockout/tagout procedures, inspections, grounding programs, and PPE.
4. Classification of hazardous gas and dust areas and the requirements for electrical equipment in each area.
Electrical safety ppt
This document discusses electrical safety and hazards. It outlines various electrical hazards including improper grounding, exposed parts, loose connections, improper appliance use, inadequate wiring, damaged insulation, wet conditions, and contact with power lines. Side effects of electricity include arc flashes/blasts, fires, and explosions. Effects on humans include loss of consciousness, spasms, burns, irregular heartbeats, disability, and death. General safety measures include lockout/tagout procedures, protective equipment, tidy work areas, training, and precautions during hot works like welding. Temporary electrification and environmental hazards are also addressed along with providing the proper fire extinguishers.
Electrical Safety for the Non-Electrical Skilled Worker by EFCOG
This document provides training for non-electrical skilled workers on recognizing and mitigating electrical hazards in the workplace. It reviews basic electrical safety training, defines who is considered a non-electrical skilled worker, and discusses requirements from the Department of Energy (DOE) and National Fire Protection Association (NFPA) standard 70E. The training then covers specific electrical hazards like shock, arc, and blast exposure and how to protect against these using lockout/tagout procedures. It provides guidance on safety-related equipment and work practices like using ground fault circuit interrupters (GFCIs), circuit breaker tripping, cord and tool inspection, ladder safety, and battery hazards and precautions.
Basic Burn Safety Training
The document provides information on basic electrical safety. It discusses fundamentals like how electricity flows and the effects of electrical current on the human body. It outlines electrical hazards like electrocution and burns. The document also gives guidelines for safe work practices around electrical equipment and defines some key electrical terms.
4.4 form 4 dangers of electricity
This document discusses electrical hazard awareness and safety. It notes that electrical hazards can cause injury, death, fires or property damage. Some key electrical hazards include making contact with overhead power lines, working on live equipment, and using damaged electrical tools. The document provides guidance on responding to electrical incidents, types of electrical injuries, and measures to protect oneself from electricity such as turning off the power source, wearing appropriate clothing and using qualified personnel. It emphasizes taking precautions and following safety procedures to avoid electrical hazards.
Electrical Safety Tips
Online Electrical Courses addresses electrical safety tips requirements that are necessary for safety and includes why electricity is dangerous and how it works.
Electrical Safety in public places
It includes general information about safety, cause behind safety, safety rules and way of acquiring safety
Electrical safety training based on osha 1910 standards sw
OSHA standards, Hazard Identification, PPE, Safety, Safe working practices, Electrical hazards and causes, Osha 1910.301, Employee responsibility, statistical quality and safety training
Electrical safety
This document discusses electrical safety and hazards. It notes that electricity can cause serious injuries or death if safety precautions are not followed. The most common electrical injuries are electrical shock, electrocution, burns, and falls. Electrical hazards include exposed parts, overloaded circuits, defective insulation, improper grounding, damaged tools, overhead power lines, and wet conditions. The document provides tips for staying safe such as inspecting tools, avoiding overloads, staying away from live wires, unplugging safely, avoiding jewelry or metal near equipment, using safe work practices, receiving training, and following lockout/tagout procedures.
Hawkins Contracting Electrical Safety in Construction
This document provides an overview of electrical safety topics for construction workers, including general electrical safety, overhead hazards, underground hazards, portable generator safety, extension cord safety, and power tool safety. It notes that from 2001-2015 in Ontario, there were 253 electrical fatalities related to construction work, with over half due to utility contact. The document outlines required minimum distances for overhead power lines and safety procedures for working around underground lines after locating. It provides guidelines for safe use of portable generators, extension cords, and power tools on construction sites.
Unit c electrical principals & technologies notes(electrical saftey)
This document discusses electrical safety and the dangers of electric shock. It explains that while high voltage can be dangerous, high amperage is even more so, as little as 0.1 amps can kill a person. The document outlines 7 steps for electrical safety, including keeping devices dry, not using damaged cords, unplugging before repairs, and not overloading outlets. It also describes safety devices like grounded plugs and circuit breakers that help prevent electric shocks.
What's hot (20)
Complete Guide to Electrical Safety in the Workplace
Complete Guide to Electrical Safety in the Workplace
Electrical hazards and safety by Sai Chaithanya Sharma
Electrical hazards and safety by Sai Chaithanya Sharma
Electrical Safety for the Non-Electrical Skilled Worker by EFCOG
Electrical Safety for the Non-Electrical Skilled Worker by EFCOG
Electrical safety training based on osha 1910 standards sw
Electrical safety training based on osha 1910 standards sw
Hawkins Contracting Electrical Safety in Construction
Hawkins Contracting Electrical Safety in Construction
Unit c electrical principals & technologies notes(electrical saftey)
Unit c electrical principals & technologies notes(electrical saftey)
Viewers also liked
Fabian Aman
Fabian Aman has over 10 years of experience in vehicle ordering and pricing at Arabian Gulf Mechanical Centre in Dubai. He specialized in strategizing BMW's product pricing and positioning in the GCC market to maximize profits and ensure market leadership. His skills include import processes, BMW specifications, pricing analysis, and managing relationships. He holds a BSc in Computer Science and professional certifications in Windows Server.
ERVIN BRUCAL
This document contains the resume of Ervin Brucal, an electrical engineer from the Philippines seeking work in Singapore. Brucal has over 10 years of experience working in equipment engineering and maintenance roles for companies in Singapore, the Philippines, and Taiwan. His responsibilities have included repairing and troubleshooting manufacturing equipment, designing systems to address machine issues, and leading various improvement projects. Brucal holds an electrical engineering degree and relevant professional certifications.
la poblacion en España y en europa
El documento resume la población en España y Europa. Explica que la población de España ha crecido desde la emigración en los años 70 a la inmigración desde 1995. También describe la distribución desigual de la población en Europa, con una mayor densidad en el Reino Unido, los Países Bajos y el norte de Italia, y menos en las zonas árticas y de montaña. Finalmente, señala que más del 70% de los europeos viven en ciudades de tamaño medio o pequeño.
WEB APPLICATION VULNERABILITIES: DAWN, DETECTION, EXPLOITATION AND DEFENSE
A slide show on the subject web application vulnerabilities. It contains how the vulnerabilities evolves, how to detect, how to exploit and how to defense against the vulnerabilities with example.
Roles and Functions of Educational Technology in the 21st Century Education
Roles and Functions of Educational Technology in the 21st Century EducationUniversity of Cebu Lapu-lapu and Mandaue
1. Educational technology plays an important role in 21st century education by making learning student-centered, collaborative, and context-based. Technology allows students to research using the internet and develop valuable skills, while teachers must cultivate student interest and curiosity through real-world applications of knowledge.
2. Cooperative learning in small groups allows students to share strengths, develop weaker skills, and improve subject understanding through numerous engaging activities. Creating a safe and challenging environment where all can contribute to clearly defined tasks supports collaborative learning.
3. Context-based assessments replicate real-world experiences and help align learning goals and standards to curriculum. They bring relevance to learning and help students relate to the world, while formative feedback aids educatorsTema 4 the plant kingdom
This document classifies and describes different types of plants. It divides plants into two main groups: flowering plants and non-flowering plants. Flowering plants are further divided into angiosperms, which produce fruits containing seeds, and gymnosperms, which have small flowers and develop seeds in cones instead of fruits. Non-flowering plants include ferns, which reproduce via spores and have roots, stems, and large frond-like leaves, as well as mosses, which have simple stems, leaves, and reproduce via spores inside capsules. The document also describes key parts of plants like leaves, roots, stems, and the process of photosynthesis by which plants produce their own food.
WEB APPLICATION VULNERABILITIES: DAWN, DETECTION, EXPLOITATION AND DEFENSE
The document discusses vulnerabilities in web applications. It begins by introducing common vulnerabilities like injection flaws, file inclusion, cross-site scripting, etc. It then provides statistics on the most prevalent vulnerabilities according to security vendors, with cross-site scripting and SQL injection being the top two. The document focuses on injection vulnerabilities like remote code execution (RCE) and SQL injection, explaining how they work, how to detect and exploit them, and defenses against them. RCE allows executing commands on remote machines while SQL injection allows executing SQL queries to leak database information. Both are dangerous and easy to exploit due to careless coding practices.
my updated cv
Samuel Scott-Wildman has worked as an apprentice at the National Physical Laboratory for a year and a half. He has learned about science legislation, research funding, and laboratory operations. Key skills include maintaining equipment, running tests, analyzing results, and presenting reports. He has experience in functional materials, environmental science, and biotechnology. Education includes apprenticeship qualifications from NPL as well as A-levels. Personal interests include motorbikes, science advances, and teaching his sister.
Presentation_final1
This document summarizes a regional hydrogeological study of the Bakken Formation in the Canadian region. It analyzes data on structure, hydraulic head, water chemistry, and pressure to generate maps showing groundwater flow direction, total dissolved solids distribution, and driving forces. It also uses a UVZ method to identify possible sites of hydrocarbon entrapment based on formation density, with light oil likely trapped at more locations than heavier oil. The study provides insight into the groundwater system and potential petroleum accumulations in the Canadian portion of the Bakken Formation.
Ecosystem
This document describes several terrestrial and aquatic ecosystems. Terrestrial ecosystems discussed include tundra, grasslands, forests, and deserts. Tundra is very cold and dry with lichens, mosses, grasses, and animals like reindeer. Grasslands are dominated by grasses and support animals such as elephants and zebras. Forests include coniferous, deciduous, Mediterranean, and tropical rainforests with different plant and animal species. Deserts are the hottest, driest places with cacti and small bushes and animals like lizards and snakes. Aquatic ecosystems discussed are lakes, rivers, oceans, coral reefs, shorelines, and the open ocean for marine environments and rivers,
Impress top 5
El documento presenta información sobre cinco especies en peligro de extinción: el lobo gris mexicano, el jaguar, el oso panda, el pingüino de Magallanes y el oso polar. Para cada especie, se describen sus características de hábitat y alimentación, así como las principales amenazas que enfrentan como la caza, la deforestación, el calentamiento global y la escasez de recursos.
Tc 2016 (14)
TIPO DE CAMBIO DEL DÓLAR DE ESTADOS UNIDOS 27 DE ENERO DE 2016 Tipo de cambio publicado por el Banco de México en el Diario Oficial de la Federación para solventar obligaciones denominadas en moneda extranjera pagaderas en la República Mexicana.
Relative-Value-Units-Athletic-Trainers
This document discusses Relative Value Units (RVUs), which are a standard measurement of cost used by Medicare and other payers. RVUs measure the resources consumed during medical procedures and practices can use RVUs to track expenses, revenues, and determine costs per procedure. By increasing efficiency and patient volumes, athletic trainers in physician practices can help generate more RVUs and downstream revenues through additional office visits, injections, surgeries, and other services.
Viewers also liked (19)
WEB APPLICATION VULNERABILITIES: DAWN, DETECTION, EXPLOITATION AND DEFENSE
WEB APPLICATION VULNERABILITIES: DAWN, DETECTION, EXPLOITATION AND DEFENSE
Roles and Functions of Educational Technology in the 21st Century Education
Roles and Functions of Educational Technology in the 21st Century Education
WEB APPLICATION VULNERABILITIES: DAWN, DETECTION, EXPLOITATION AND DEFENSE
WEB APPLICATION VULNERABILITIES: DAWN, DETECTION, EXPLOITATION AND DEFENSE
Bravo Manager: la solució definitiva per a teatres
Bravo Manager: la solució definitiva per a teatres
Similar to Electrical safety
CSSM-LESSON-SLIDES_061738.pdfhwhhwgggwgg
The document discusses electrical hazards and safety procedures for computer system servicing and maintenance. Some key points:
1. Electrical hazards can cause shock, arc flash burns, or other injuries if workers make contact with energized equipment. Common electrical hazards include poorly installed wiring and equipment, overloaded outlets, and damaged cords.
2. Both static and dynamic electricity present risks. Static builds up from contact and friction, while dynamic electricity is the flow of electrons through a circuit.
3. Workers should be trained to install equipment safely, check for faults, isolate live parts, and use proper protective equipment like gloves and glasses. Unplugging equipment, avoiding water sources, and keeping work areas clear can reduce hazards.
Clevo M540 G User's Manual
This document contains preface information and safety instructions for a notebook computer. It states that the manufacturer reserves the right to change the document without notice. It also contains notices about copyright and trademarks. The document provides instructions on the proper use and care of the computer, including warnings about power safety, battery use, and regulatory compliance statements.
Electrical Safety in healthcare.
If you like to get the presentation as softcopy , please dont hesitate to contact me through email ((ahmad.thanin@outlook.com) , price 2.0 USA Dollar
Electrical wiring systems and safety devices.pptx
Electricity can cause serious injuries or death if safety precautions are not followed. Some common electrical hazards include exposed electrical parts, overloaded circuits, defective insulation, improper grounding, and damaged power tools. It is important for workers to be aware of electrical hazards and follow safety practices such as inspecting cords before use, avoiding overloading circuits, staying away from unguarded conductors, and wearing appropriate personal protective equipment when working with electricity. Training workers on electrical safety practices, lockout/tagout procedures, and safe work practices is essential for prevention of electrical accidents.
Lab # 01 Workshop Practice.pptx
The document discusses electrical safety, hazards, and precautions. It covers how electric current affects the body, risks from electricity, legal duties, and basic safety steps. The key points are: electric current between 1mA-16mA can cause shocks, those most at risk are maintenance and construction workers, employers have a duty to maintain safe electrical systems, and basic safety includes using the right equipment, maintenance, secure wiring, switching off tools before handling, and competent work.
Electrical Safety In The Office
Electrical safety in the office is important to avoid hazards like fires or electric shocks. Liquids should be kept away from electrical equipment and machines should be unplugged before cleaning spills to prevent damage. Staff also need to be trained on safe procedures for operating office machines like photocopiers and shredders to avoid injuries. Overloading circuits with too many adaptors or appliances could cause outages, so unauthorized devices should be prohibited and larger sockets installed if more power is needed regularly.
Safety Precautions for Electrician Services.pdf
Electrical services are provided by electricians for installing, maintaining, and repairing electrical systems. Electrical services include installations, ceiling fans, outdoor lighting, wiring upgrades, circuit breaker replacements, whole house surge protectors, GFCI outlet installation, child-proof outlets, and more. Our expert residential, commercial & industrial electricians can provide these services and emergency services at reasonable prices anywhere in Hyderabad.
Electrical Safety Joliet Distribution Center
This document provides an overview of electrical safety. It discusses the main electrical hazards of fire, shock, and burns. It defines important electrical terms and outlines safety rules and personal protective equipment requirements for working with electricity, including inspecting cords, locking out equipment during maintenance, and proper grounding. Personal responsibilities are to follow electrical safety rules and report any electrical deficiencies.
Electrical safety
This document discusses electrical safety for both industry and home. It outlines four major types of electrical injuries: electrocution, electrical shock, electrical burns, and falls. It emphasizes that only authorized employees should conduct electrical work after receiving special training. It warns of overloads causing fires and damage to tools/equipment. Exposed electrical parts, improper grounding, damaged insulation, and wet conditions are also identified as hazards. The document concludes with key safety practices for homes such as inspecting wiring, using faceplates, checking cords and gauges, avoiding daisy chaining, and not using electricity in wet areas.
ELECTRICAL SAFETY Training module pembelajaran
This document provides training on electrical safety procedures for a construction project. It outlines objectives to eliminate injuries, establish responsibility, and ensure safety. It discusses risks of portable electrical equipment and inspections. General electrical safety tips are provided such as checking equipment condition, using proper cables/plugs, and not misusing tools. First aid procedures for electric shocks emphasize protecting the victim, assisting, and informing emergency services. Reminders stress proper equipment use and wiring to avoid hazards.
Safety Precautions for Electrician Services.pptx
Electrical services are provided by electricians for installing, maintaining, and repairing electrical systems. Electrical services include installations, ceiling fans, outdoor lighting, wiring upgrades, circuit breaker replacements, whole house surge protectors, GFCI outlet installation, child-proof outlets, and more. Our expert residential, commercial & industrial electricians can provide these services and emergency services at reasonable prices anywhere in Hyderabad.
LG Le50 Service Manual
This document is a service manual for an LG laptop (model LE50). It contains the following chapters:
1. Service information - Provides general safety information and strategies for replacing parts.
2. Locations - Identifies external components like ports and buttons.
3. System information - Lists the CPU specification and model configuration.
It also includes chapters on symptom-to-part diagnosis, removing and replacing parts, and an exploded parts diagram. The document provides technicians with information needed to safely service the laptop.
ELECTRICAL SAFETY PRESENTATION.ppt
This document provides an overview of electrical safety. It discusses the purpose of electrical safety training, basic concepts of electricity, hazards recognition, effects of electricity on the human body, and hazard protection methods. It outlines work practices for using electrical tools and equipment safely, as well as responsibilities of supervisors and employees. Specific safety topics covered include inspecting cords and equipment, keeping electrical panels clear, avoiding trip hazards, locking out power sources, using personal protective equipment, and emergency response procedures. The goal is to raise awareness of electrical hazards and instruct safe work practices to prevent electrical accidents.
ELECTRICAL HAZARD.pptx
An electrical hazard is a dangerous condition where a worker could make contact with energized equipment and be injured. Some common electrical hazards include overhead power lines, damaged tools and equipment, exposed electrical parts, improper grounding, inadequate wiring, damaged insulation, and wet conditions. Exposure to electrical hazards can cause electric shock, arc flash burns, and death. Workers must use protective equipment like gloves, shields and flame resistant clothing to protect themselves from electrical injuries.
Electrical engineering lab
The document outlines dos and don'ts for electrical safety. It advises avoiding contact with live circuits, disconnecting power before servicing equipment, wearing protective clothing, and using caution around hot equipment. It also warns against exceeding machine limits, making changes with power on, and working alone on high voltages. Proper wiring and meter selection are emphasized.
Electrical Hazards and their safety
Electrical Hazards that occurs in day-to-day life and precautions against them have been explained as far as possible.
Sv i p5a-eng_600v_120615
This document provides safety instructions for installing and operating an inverter. It warns that removing covers while powered could cause electric shock and outlines precautions like installing on non-flammable surfaces, disconnecting power before servicing, and not operating with damaged or missing parts. The instructions state operating conditions and environmental limits, and provide wiring and testing cautions like verifying correct terminal connections and motor rotation.
Electrical Safety Training Slides For Worker
1. The document outlines core safety behaviors for electrical safety, including always assuming electrical lines are energized, using lock out/tag out procedures, ensuring proper protective barriers are in place, using approved insulated tools and PPE, and getting approvals for new electrical installations.
2. Specific safety behaviors are also highlighted, such as using industrial plugs for handheld tools, installing residual current circuit breakers, not overloading multi-adapters, properly supporting cable lengths, and only using generators with protective devices and earthing.
3. The five golden rules of electrical safety are also listed: isolating equipment, securing switchgear, checking for no power, earthing equipment, and identifying work areas with signs.
Electrical Safety1
This document outlines electrical safety requirements and procedures for working with electrical equipment. It discusses hazards of electricity, requirements for special training and authorization before conducting electrical work, safe work practices such as locking out and tagging energy sources, use of personal protective equipment, inspection and testing requirements for electrical tools and equipment, and maintaining a safe work area. Electrical safety is important as electrical hazards can result in severe injury or death.
Similar to Electrical safety (20)
Recently uploaded
Letter and Document Automation for Bonterra Impact Management (fka Social Sol...
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on automated letter generation for Bonterra Impact Management using Google Workspace or Microsoft 365.
Interested in deploying letter generation automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
AWS Cloud Cost Optimization Presentation.pptx
This presentation provides valuable insights into effective cost-saving techniques on AWS. Learn how to optimize your AWS resources by rightsizing, increasing elasticity, picking the right storage class, and choosing the best pricing model. Additionally, discover essential governance mechanisms to ensure continuous cost efficiency. Whether you are new to AWS or an experienced user, this presentation provides clear and practical tips to help you reduce your cloud costs and get the most out of your budget.
Nunit vs XUnit vs MSTest Differences Between These Unit Testing Frameworks.pdf
When it comes to unit testing in the .NET ecosystem, developers have a wide range of options available. Among the most popular choices are NUnit, XUnit, and MSTest. These unit testing frameworks provide essential tools and features to help ensure the quality and reliability of code. However, understanding the differences between these frameworks is crucial for selecting the most suitable one for your projects.
Columbus Data & Analytics Wednesdays - June 2024
Columbus Data & Analytics Wednesdays, June 2024 with Maria Copot 20
Trusted Execution Environment for Decentralized Process Mining
Presentation of the paper "Trusted Execution Environment for Decentralized Process Mining" given during the CAiSE 2024 Conference in Cyprus on June 7, 2024.
Azure API Management to expose backend services securely
How to use Azure API Management to expose backend service securely
Main news related to the CCS TSI 2023 (2023/1695)
An English 🇬🇧 translation of a presentation to the speech I gave about the main changes brought by CCS TSI 2023 at the biggest Czech conference on Communications and signalling systems on Railways, which was held in Clarion Hotel Olomouc from 7th to 9th November 2023 (konferenceszt.cz). Attended by around 500 participants and 200 on-line followers.
The original Czech 🇨🇿 version of the presentation can be found here: https://www.slideshare.net/slideshow/hlavni-novinky-souvisejici-s-ccs-tsi-2023-2023-1695/269688092 .
The videorecording (in Czech) from the presentation is available here: https://youtu.be/WzjJWm4IyPk?si=SImb06tuXGb30BEH .
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
Predictive maintenance is a proactive approach that anticipates equipment failures before they happen. At the forefront of this innovative strategy is Artificial Intelligence (AI), which brings unprecedented precision and efficiency. AI in predictive maintenance is transforming industries by reducing downtime, minimizing costs, and enhancing productivity.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Choosing The Best AWS Service For Your Website + API.pptx
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Taking AI to the Next Level in Manufacturing.pdf
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
5th LF Energy Power Grid Model Meet-up Slides
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Simplify your search for a reliable Python development partner! This list presents the top 10 trusted US providers offering comprehensive Python development services, ensuring your project's success from conception to completion.
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
Recently uploaded (20)
Letter and Document Automation for Bonterra Impact Management (fka Social Sol...
Letter and Document Automation for Bonterra Impact Management (fka Social Sol...
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Nunit vs XUnit vs MSTest Differences Between These Unit Testing Frameworks.pdf
Nunit vs XUnit vs MSTest Differences Between These Unit Testing Frameworks.pdf
Trusted Execution Environment for Decentralized Process Mining
Trusted Execution Environment for Decentralized Process Mining
Azure API Management to expose backend services securely
Azure API Management to expose backend services securely
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Choosing The Best AWS Service For Your Website + API.pptx
Choosing The Best AWS Service For Your Website + API.pptx
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
WeTestAthens: Postman's AI & Automation Techniques
WeTestAthens: Postman's AI & Automation Techniques
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
Electrical safety
- 2. Electric current from power, telephone, and communication cables can be hazardous.
- 3. To avoid personal injury or equipment damage, disconnect the attached power cords, telecommunications systems, networks and modems before you open the server/workstation covers, unless instructed otherwise in the installation and configuration procedure.
- 4. Precautions: Disconnect all power before: 1.Performing a mechanical inspection
- 5. 2. Working near power supplies
- 6. 3.Removing or installing main units
- 7. Before starting work on the machine, unplug the power cord.
- 8. Never assume that power has been disconnected from a circuit. First, check that it has been powered-off.
- 9. Always look carefully for possible hazards in your work 1.Moist floors
- 10. 2. Non-grounded power extension cables 3. Power surges.
- 11. If an electrical accident occurs: 1. Switch off power 2. Send another person to get medical aid
- 12. Prepared by: Aralina Picson Aporador